Age | Commit message (Collapse) | Author |
|
changing the default ROM size to 1M to accommodate this and future changes. I tested on SimNow family10h_1p.bsd and it POSTs OK.
Signed-off-by: Vincent Lim <vincent.lim@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4289 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
register setting for all FAM10 processors.
This does not include new errata for FAM10 C2.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Vincent Lim (vincent.lim@amd.com)
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4288 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Vincent Lim <vincent.lim@amd.com>
Acked-by: Vincent Lim <vincent.lim@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4287 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
up to 8 nodes, and each nodes supports 1,2,3,4,5, or 6 cores.
Signed-off-by: Vincent Lim <vincent.lim@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4286 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
I would like to remind you that this firmware enables the hardware
virtualization on the AMD cpu's on the machine. That feature was
explicitly disabled by the factory BIOS.
Due to an error in the VGAROM no other rom loader (YABEL or X*^BIOS)
than SeaBIOS manages to load the VGA rom. The VGA ROM tries to read
config space of a device that is actually not present.
Because SeaBIOS does not support AHCI SATA it can not start the
bootable drive of the machine so i had to add filo to seabios to
manage booting:
./cbfstool coreboot.rom add-payload filo.elf img/FILO
Signed-off-by: Samuel Verstraete <samuel.verstraete@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
src/northbridge/intel/i440bx/ but not to
src/cpu/emulation/qemu-x86/northbridge.c
It also adds a driver for the ISA device that is found when using
0.9.1 If you look in a log without this patch you won't find the RTC
init lines.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4269 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
because it was not working anyway (it was hardcoded) and because it allows me to
fix the XIP base to something sane (and use generic computation and approach)
This board is bit tricky because until now it required the VGA BIOS on the flash
start. XIP will work with 64KB aligned base, therefore the VGA ROM image must be
aligned too to 64KB.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4265 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4260 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
the ones in i82801xx_lpc.c.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4259 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
the boot process.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4258 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4257 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
find . -type f| grep -v svn | xargs dos2unix
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4250 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4249 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
ones that are actually connected to something.
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4248 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4245 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Kills a few more compiler warnings.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4243 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Joseph Smith <joe@settoplinux.org> Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4242 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
I didn't try to remove "defined but not used" warnings because there are too
many ifdefs to be sure I wouldn't break something.
For shadowed variable declarations I renamed the inner-most variable.
The one in src/pc80/keyboard.c might need help. I didn't change the
functionality but it looks like a bug.
I boot tested it on s2892 and abuild tested it.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4240 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4237 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4236 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
3 (with one of them way too much assembler code).
On the way, I had to make some changes to the way the code is built,
which is an effort I want to expand over time.
Right now, large portions of the in-ROM part of coreboot is compiled as
a single file, with lots of .c files including other .c files.
That has its justification for pre-raminit code, but it also affects
lots of post-raminit code (memcpy doesn't really make sense before
raminit, or at least CAR)
The coreboot_apc code (AMD boards) gained some .c includes because I
don't know that part of the code enough to really rework it and only
have limited possibilities to test it. The includes should give an
identical situation for this part of the code.
This change was posted as set of 6 patches to the list, but they
were mostly split for review purposes, hence commit them all at once.
They can still be backed up using the patch files, if necessary.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4233 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
support for it.
The related mainboards don't need to activate it
themselves anymore.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4224 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
this generic code could be added to the caller of
add_mainboard_resources (wrapped in HAVE_HIGH_TABLES, of course).
That way, boards that really need it (for other things) can use this
function, while others don't have to do anything to use
HAVE_HIGH_TABLES.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4223 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4222 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4221 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4219 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
tested, incl. optionrom-in-cbfs for kontron, and compressed payloads
for both.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4212 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4186 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
the appropriate mainboard sources.
Signed-off-by: Mondrian nuessle <nuessle@uni-hd.de>
Acked-by: Samuel Verstraete <samuel.verstraete@gmail.com>
I updated some whitespace and the Config files. - Myles
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4184 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
(scan-build chokes on this)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4181 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4175 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
combined socket_mPGA604. No other sockets come with clock rates, and there is
no difference in code, except for the number of microcode patches included in a
build.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4169 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4157 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
refactoring Config.lb became possible.
Factor out ROM size calculation from Config.lb.
This patch converts 87 boards (with and without USE_FAILOVER_IMAGE),
but it has to work around a parser bug.
89 files changed, 209 insertions(+), 2415 deletions(-)
A total of 2206 removed lines.
Abuild works for all changed boards on khepri.
Myles writes:
I've tested serengeti for the failover portion and s2892 for the
nofailover portion. ldoptions are exactly the same and they both boot
the same.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
prototype for these assembler functions.
Affected boards:
digitallogic/msm800sev
pcengines/alix1c
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4140 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This is a pretty standard "yet another 440BX" target, so the code
is pretty straight-forward. It's a dual-CPU machine, which might need
some fixing, I'm booting with 'maxcpus=0' for now. It does boot
successfully up to a Linux login prompt, though.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4133 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4126 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4123 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
HAVE_MP_TABLE=0
It also removes the artifacts from the Asus m2v-mx_se that were
necessary before the change.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4120 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Repeat: Cosmetic patches shall not break the tree for 20 revisions.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4116 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4115 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This also has the config tool changes in v2/util.
Rename romfs.[ch]->cbfs.[ch] and sed romfs->cbfs romtool->cbfstool ROMFS->CBFS
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4113 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
It should fix the build break introduced in r4101
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4105 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
code just blinks the leds. The motherboard resources are use to reserve coreboot
used memory.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4103 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
In file included from
src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c:93:
src/northbridge/amd/amdk8/raminit.c: In function ‘sdram_set_spd_registers’:
src/northbridge/amd/amdk8/raminit.c:2123: error: implicit declaration of
function ‘activate_spd_rom’
In file included from
src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c:101:
src/cpu/amd/model_fxx/init_cpus.c: In function ‘init_cpus’:
src/cpu/amd/model_fxx/init_cpus.c:319: error: implicit declaration of
function ‘soft_reset’
In file included from
src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c:98:
src/northbridge/amd/amdk8/raminit_f.c: In function ‘sdram_set_spd_registers’:
src/northbridge/amd/amdk8/raminit_f.c:2848: error: implicit declaration of
function ‘activate_spd_rom’
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4098 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
now all have the same parameter order.
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS)
-I$(TOP)/src -I. -nostdinc -nostdlib -fno-builtin -Wall -Os -c -S
$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -o $@"
The idea behind this parameter order is:
- *FLAGS at the beginning.
- Use a common set of *FLAGS.
- Include files and directories listed afterwards.
- nostdinc, nostdlib, no-builtin tell the compiler this is standalone
code.
- Warnings. They do not influence source or compilation.
- Compilation strategy (small) and output mode (asm or binary).
- File to be compiled.
- Output name.
- $(DEBUG_CFLAGS) and -S are only used for asm output.
Other changes in this patch:
- src/supermicro/h8dme/Config.lb now uses $DEBUG_CFLAGS instead of
hardcoding the respective flags.
- $DEBUG_CFLAGS was added to asm outputting $CC calls:
supermicro/h8dme/Config.lb
lippert/roadrunner-lx/Config.lb
- $DISTRO_CFLAGS was added to some $CC calls in:
iwill/dk8_htx/Config.lb (CAR AP code)
supermicro/h8dmr/Config.lb (CAR AP code)
supermicro/h8dme/Config.lb (CAR AP code)
gigabyte/m57sli/Config.lb (CAR AP code)
gigabyte/ga_2761gxdk/Config.lb (CAR AP code)
amd/serengeti_cheetah_fam10/Config.lb (everywhere)
msi/ms7135/Config.lb (everywhere)
nvidia/l1_2pvv/Config.lb (CAR AP code)
-$CFLAGS was added to all $CC calls in:
amd/db800/Config.lb
amd/dbm690t/Config.lb
amd/norwich/Config.lb
amd/pistachio/Config.lb
amd/serengeti_cheetah/Config.lb
amd/serengeti_cheetah_fam10/Config.lb
arima/hdama/Config.lb
artecgroup/dbe61/Config.lb
asus/a8n_e/Config.lb
asus/a8v-e_se/Config.lb
asus/m2v-mx_se/Config.lb
broadcom/blast/Config.lb
digitallogic/msm800sev/Config.lb
gigabyte/ga_2761gxdk/Config.lb
gigabyte/m57sli/Config.lb
ibm/e325/Config.lb
ibm/e326/Config.lb
iei/pcisa-lx-800-r10/Config.lb
iwill/dk8_htx/Config.lb
iwill/dk8s2/Config.lb
iwill/dk8x/Config.lb
kontron/986lcd-m/Config.lb
lippert/roadrunner-lx/Config.lb
lippert/spacerunner-lx/Config.lb
msi/ms7135/Config.lb
msi/ms7260/Config.lb
msi/ms9185/Config.lb
msi/ms9282/Config.lb
newisys/khepri/Config.lb
nvidia/l1_2pvv/Config.lb
pcengines/alix1c/Config.lb
sunw/ultra40/Config.lb
supermicro/h8dme/Config.lb
supermicro/h8dmr/Config.lb
technexion/tim8690/Config.lb
tyan/s2735/Config.lb
tyan/s2850/Config.lb
tyan/s2875/Config.lb
tyan/s2880/Config.lb
tyan/s2881/Config.lb
tyan/s2882/Config.lb
tyan/s2885/Config.lb
tyan/s2891/Config.lb
tyan/s2892/Config.lb
tyan/s2895/Config.lb
tyan/s2912/Config.lb
tyan/s2912_fam10/Config.lb
tyan/s4880/Config.lb
tyan/s4882/Config.lb
- Use $@ wherever appropriate.
- Kill that evil CACHE_AS_RAM_AUTO_C variable.
- Trailing whitespace fixups on lines which were touched anyway.
We now only have 6 remaining different calls to $CC whereas before there
were 20.
If I am allowed to rename src/mainboard/kontron/986lcd-m/auto.c to
src/mainboard/kontron/986lcd-m/cache_as_ram_auto.c, we're down to 4
different calls.
If we can decide on the use of $CPU_OPT, we are down to 3 different
calls.
One additional point I'd like to clear up:
if ASSEMBLER_DEBUG
makedefine DEBUG_CFLAGS := -g -dA -fverbose-asm
end
"-dA -fverbose-asm" is only useful for asm output. For these flags,
DEBUG_CFLAGS is a total misnomer. What about calling them
DEBUG_ASMCFLAGS or somesuch?
"-g" should be controllable by a separate switch. It is useful even for
object code.
The following targets are broken by this patch because they contain
implicit declarations, but the error did not trigger due to missing
CFLAGS:
amd/serengeti_cheetah
asus/a8v-e_se
asus/m2v-mx_se
digitallogic/msm800sev
pcengines/alix1c
supermicro/h8dme
supermicro/h8dmr
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Use $(CACHE_AS_RAM_AUTO_C) instead of cache_as_ram_auto.c
- Compile apc_auto.c with $(DISTRO_CFLAGS)
- Clean up whitespace
If anyone can explain the remaining differences in Config.lb which are
NOT caused by the K8/Fam10 switch, I'd be glad to hear them.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4095 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Lots of Config.lb files still have "if USE_DCACHE_RAM" sections although
USE_DCACHE_RAM is always set for them. Such checks are not only
pointless, they actively make the files hard to read.
A full abuild run confirmed that compilation did not change with this
patch applied.
The patch does not change whitespace of the remaining code to ease
review and svn blame.
With this change, it should be possible to have two or three Config.lb
variants in total (except the actual hardware config). Right now, some
Config.lb have comments, some don't, some have empty lines for better
readability, some don't, some have leading whitespace, some don't. This
is an utter mess and unifying these files would certainly reduce the
headaches I have when looking at them.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4084 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
(trivial)
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
working. Given all the limitations of PIRQ routing we keep it simple
and just set the IRQ directly. Most BIOSes are doing setup this way anyways,
since there are so many errors in PIRQ tables.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4080 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- don't make users pick the name. Names for option roms are in the v3-defined
format of pci%04x,%04x.rom with the vendor and device id filling in the
%04x.
- users pass in vendor and device id.
- users pass in a dest. If the dest is 0, the address of the ROM image in
FLASH is returned. If the address is non-zero, then the decmpressor is called,
and it will make sure the ROM image is copied to the destination (even
in the uncompressed case).
move qemu over to always using ROMFS
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4078 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
As I mentioned a few weeks ago, I am in the process of porting this board:
http://www.technexion.com/products/embedded_boards/tim-8690-mt.html
This board has a dual BIOS , choosable with a jumper - much like the BIOS
savier from before - so it is a pleasure to work with as a linuxbios developer.
It is still a work in progress, however , I already submit the patch.
All on board devices and slots work as expected, only need some more stress
testing with the RAM, acpi, etc..
Signed-off-by: Daniel Toussaint <daniel@dmhome.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4075 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4074 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4073 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
(trivial).
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4062 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4058 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
in their Config.lb but never use it. There's no point in keeping
dead code around.
This patch removes ROMCC remainders from Config.lb and kills orphaned
auto.c and failover.c in the affected mainboard directories.
arima/hdama
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms9282
newisys/khepri
sunw/ultra40
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882
Abuild log is completely identical with and without the patch.
With this patch, the last ROMCC remainders for K8 boards are gone.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4055 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
tyan/s2735
tyan/s2850
tyan/s2875
tyan/s2880
tyan/s2881
tyan/s2882
tyan/s2885
tyan/s2891
tyan/s2892
tyan/s2895
Abuild log is completely identical with and without the patch.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4050 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
in their Config.lb but never use it. There's no point in keeping dead
code around. Kill it.
This patch removes ROMCC remainders from Config.lb for tyan/s2735 and
tyan/s2850.
Abuild build log with and without the patch is completely identical.
More patches of the same type can be done, hopefully making
ROMCC dependencies a bit more clear for v2.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4048 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
be used unconditionally, and the names don't hurt.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4042 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Trivial fix, just add the defaults as with all other boards.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4041 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Tested under abuild, causes no trouble.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4033 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
coreboot to 1MB and tries to cache whole range for XIP. The UMA part colide a
bit with the HAVE_HIGH_TABLES region. I solved that by relocation of the region.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4025 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
coreboot to 1MB and tries to cache whole range for XIP. The UMA part colide a
bit with the HAVE_HIGH_TABLES region. I solved that by relocation of the region.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4024 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The one issues is the SPD address switch for the second CPU. That means that
the memory must be an exact match on each CPU.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
DSDT and use the dynamic TOM2 variable instead.
- The DSDT needs to be revision 2 or above to handle 64 bit variables.
This will require a recent (not older than 2007) iasl (ACPI compiler).
- Fix an incorrect comment.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
code expecting too old binutils(?).
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4007 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
address of the RTC is 0x70, you need to write 0x400 to it. Now the dump from
superiotool matches the factory except 0xf0 of the keyboard. When you boot with
the factory BIOS that is 0x04, but with coreboot it is not set.
It's trivial because it is reverts.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4002 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
directories and use the global (v3) one in util/x86emu instead. It also fixes
the breakage introduced by 4000
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4001 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Use the (almost) same strict CFLAGS in v2 that we use on v3. And fix a few
include files and missing prototypes. Also, fix up the Config-abuild.lb files
to properly work for cross compiling.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4000 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3999 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
* ACPI updates: MCFG, HPET, FADT
* some mptable fixes for certain riser cards
* Use Channel XOR randomization
* Fix SuperIO HWM setup
* Enable all three network adapters
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3993 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
be required for a series of later patches. Roughly it contains:
* fixed SMBus driver (was not compiled in before)
* fixed S-ATA/P-ATA combination
* Added warnings to drivers being called with a NULL dev->chip_info
* Set subsystem ids for those boards that have none specified in Options.lb
* Fix license headers. The code was originally released under GPL v2 but
some files sneaked in with a v2 or later header.
* some attempts to fix azalia/Intel HDA.. not working yet
* clean up and fix pci bridge handling code
* Add Config based GPI handling to LPC driver
* Add HPET enable function
* Enable clock gating where appropriate
* first attempt at USB debug console support (not working yet)
* Add required options to kontron board
* many other minor changes
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
a problem with IRQ 9, but besides that Linux is happy. BSOD in Windows still.
changes by file:
src/mainboard/tyan/s289X/Options.lb:
Add options and defaults for ACPI tables and resources.
src/mainboard/tyan/s289X/mainboard.c:
Add high_tables resource ala Stefan's code for the Kontron.
src/mainboard/tyan/s289X/acpi_tables.c:
Fill out the ACPI tables, using existing code where possible.
Only the madt is different between the boards, to be combined later.
src/mainboard/tyan/s289X/Config.lb:
Compile in acpi_tables.c and dsdt.dsl.
Turn on the parallel port and the real-time-clock.
src/mainboard/tyan/s289x/dsdt.dsl:
The board layout (thanks Rudolf) and interrupts from mptable.c
src/mainboard/tyan/s289x/mptable.c:
Minor formatting changes to make them diff better.
src/superio/smsc/lpc47b397/superio.c:
Correct the size of the real-time-clock so it can be where it belongs.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3989 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3987 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
whitespace differences between this file and the amdk8_util.asl from
asus/m2v_mxe.
It also enables SLIT filling if you have one, zeroes the unused fields in the
srat_lapic structure, and adds some declarations in acpi.h.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3986 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
* move mainboard dependent code into a mainboard SMI handler.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3979 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
triggered by the AMD 690/SB600 targets.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3970 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
a long time ago. This will make it easier to port v2 boards forward to v3 at
some point (and other things)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3964 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
(in addition to their low locations)
This adds the kontron 986LCD-M and the i945 as a sample.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3960 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
removes the ugly binary DSDT patching and all other related stuff. Stick to
infrastructure in previous patch.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3955 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This patch converts mainboard_$VENDOR_$BOARD_ops to mainboard_ops and
mainboard_$VENDOR_$BOARD_config to mainboard_config.
Ron's part:
The config change that makes the naming change not break every build.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- make uma_memory_base and uma_memory_size uint64_t as they may be 64bit BARs
on some platforms.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
M2V-MX SE as example how to do that. It is based on AMD code and mine code for
ACPI generation.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3946 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The company is dead.
It causes builds to fail, and that is not a problem we need to have.
Removing it to remove the problems it causes.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3945 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3941 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3940 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
clause.
An ITE87427 Super I/O does not exist. Use the real name (IT8712F) of
the chip on the DBM690T board.
Use decimal values for KELV, THOT and TCRT on the Pistachio board for
better readability.
Tested by Maggie Li on DBM690T and Pistachio.
Tested by Carl-Daniel Hailfinger on Asus M2A-VM.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3939 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Fix reference to documentation.
Use __FUNCTION__ instead of hardcoding function names in printk
messages.
No functional changes.
I'm slowly getting to the point where adding another RS690 board is
really easy and needs almost no changes to the existing target.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3938 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3936 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
arguments.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3931 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
new AML code generator. Compile-tested on all changed targets. I think it should
work because it works for Asus M2V-MX SE.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
generate run-time ACPI ASL code.
Moreover it demonstrates its use on Asus M2V-MX SE where the SSDT table is
generated by new function k8acpi_write_vars (technically similar to
update_ssdt). But lot of nicer.
x
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3922 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- use new features of the ich7 update
- move rambase above 1M to avoid memory trashing through SMM relocation
- enable superio HWM
Update ICH7 driver
- minor smi cosmetics (in progress)
- add real ac97 driver
- add real azalia driver
- fix some interrupt issues
- fix some sata issues
- include Patrick's fix for _lpc.c
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|