summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2023-03-05mb/google/geralt: Add NAU8318 support for GeraltTrevor Wu
Add a config "USE_NAU8318" to enable NAU8318 support. NAU8318 is another speaker used in Geralt. NAU8318 supports beep function via GPIO control. So we configure the GPIO pins and pass them to the payload. BUG=b:250459803 BRANCH=none TEST=Verify beep function through CLI in depthcharge successfully. Change-Id: I21009a20809f398de4628ff0c11bcbd0e7591443 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73413 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-05mb/google/geralt: Add MAX98390 support for GeraltTrevor Wu
Add a config "USE_MAX98390" to enable MAX98390 support. MAX98390 is an I2S smart amplifier used in Geralt. It is also the default speaker for Geralt reference board. BUG=b:250459803 BRANCH=none TEST=Verify beep function through CLI in depthcharge successfully. Change-Id: I814f440cc5ac2a13404d01fb3baafeec092b1e74 Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73412 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-05mb/google/geralt: Add mtcmos bus protection for displayLiju-Clr Chen
Enable bus protection for display to avoid bus hang and incomplete bus transaction. BUG=b:264204465 TEST=test firmware and kernel display pass for MIPI panel on geralt. Change-Id: Iac61a69f2b84966dd468442daaa59d83eec775aa Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73411 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-05mb/google/hades: Add baseboard device treeEric Lai
Add minimum device tree. Leave IOs default disable to optimize variant override complexity. BUG=b:271199379 TEST=abuild -a -x -c max -p none -t google/brya -b hades Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ibb056c07193b4265352a9ec74829dcf02a9340bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/73415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-03-04mb/google/skyrim/var/markarth: Update RAM ID tableJohn Su
Add new ram_id:0011 for Hynix H58G56BK8BX068. Add new ram_id:0100 for Hynix H58G66BK8BX067. The RAM ID table has been assigned as: DRAM Part Name ID to assign K3KL8L80CM-MGCT 0 (0000) H58G56BK7BX068 0 (0000) MT62F1G32D2DS-026 WT:B 0 (0000) K3KL9L90CM-MGCT 1 (0001) H58G66BK7BX067 1 (0001) MT62F2G32D4DS-026 WT:B 1 (0001) MT62F512M32D2DR-031 WT:B 2 (0010) H58G56BK8BX068 3 (0011) H58G66BK8BX067 4 (0100) BUG=b:270629852 BRANCH=None TEST=FW_NAME=markarth emerge-skyrim coreboot Change-Id: Ida5c8354af71cd92c056a33e38d1fadfc5704977 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73252 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-03-04mb/google/skyrim/var/frostflow: Update DPTC and STT settingsFrank Wu
According to thermal_table_0215, adjust DPTC and STT settings. BRANCH=none BUG=b:257149501 TEST=emerge-skyrim coreboot chromeos-bootimage Then the thermal team has verified. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Id7df3f9bfa3f0e1337c502bc7db9e09e12cd956a Reviewed-on: https://review.coreboot.org/c/coreboot/+/73081 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-04soc/amd/mendocino: Remove the SPL DPTC parameterChris Wang
The SPL parameter for DPTC settings is not available for STT-enabled platforms. It needs to be removed to avoid confusing STT calculations. BUG=b:265267957 BRANCH=none TEST=Run the WebGL aquarium with 5000 fish and verify that there are no power drop peaks. Change-Id: I8e6dad7d24883f8aadce83ebac401ecd4137d61a Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-03-04mb/system76/adl-p: Add Oryx Pro 10 as a variantTim Crawford
oryp10 is nearly identical to the oryp9, with the differences being: - Uses DDR5 RAM instead of DDR4 RAM - Uses Realtek ALC1306 instead of TI TAS5825M - Has an option for OLED display Change-Id: I0cf46cb5d10098dd31f0dc3c620db0c7e20ffba4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76/adl: Add Oryx Pro 9 as a variantTim Crawford
The Oryx Pro 9 (oryp9) is an Alder Lake-P board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - Both M.2 NVME SSD slots (with MZVL2500HCJQ) - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.1.11 - Internal flashing with flashrom v1.2-1203-gf4ddd3234330 Not working: - Discrete/Hybrid graphics - HDMI output (requires NVIDIA GPU) - Mini DisplayPort output (requires NVIDIA GPU) - Detection of devices in TBT slot on boot Change-Id: I8aac3e83f4423f444cb9ce8aa562ba465eb718c1 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76/adl: Add Lemur Pro 11 as a variantTim Crawford
The Lemur Pro 11 (lemp11) is an Alder Lake-U board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - DIMM slot (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - M.2 SATA SSD (with WDS100T2B0B) - All USB ports - SD card reader - Webcam - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined headset + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.1.11 - Internal flashing with flashrom v1.2-1203-gf4ddd3234330 Not working: - On-board RAM: Requires CB:65567 - Detection of devices in TBT slot on boot Change-Id: Ic930df1ebacc8c7ef14dbb6c67a97eddb918b365 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/google/brask/var/moli: Allow USB2/3 wakeups to (un)plug events in dtScott Chao
BUG=b:230398487 BRANCH=none TEST=Verify USB-A device could wake up Moli. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I1c8daf62dabe674a39b1416d886f9e470ae23a5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73174 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-04mb/system76: Add custom backlight levels for Intel GMATim Crawford
Add custom backlight levels for all models except: - addw1/addw2: Uses an OLED display - bonw14: Does not use the iGPU Change-Id: Ibea37f19acca0d718211fc41706019a92a240c70 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76/tgl-u: Leave TBT LSX0 as FSP configuredTim Crawford
Do not reconfigured LSX0 so that the FSP values are used. Change-Id: I7ef4af2cde4f3260f2bc2efdbf85569b0eb147fb Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04{ec,mb}/system76: Move smbios_system_wakeup_typeTim Crawford
Move the implementation of smbios_system_wakeup_type from the mainboards to the EC for all models that use System76 EC (everything except KBL). Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/google/brya: remove the skolas baseboardNick Vaccaro
The skolas baseboard is no longer needed, so this change removes the baseboard files for skolas and adjusts the config settings to that variants that used to select BOARD_GOOGLE_BASEBOARD_SKOLAS now select BOARD_GOOGLE_BASEBOARD_BRYA and SOC_INTEL_RAPTORLAKE. BUG=b:271470530 TEST="emerge-brya coreboot chromeos-bootimage", flash image-skolas.bin onto a skolas and verify it boots to kernel. Change-Id: I34cae7e471851aa52a64ce3af7bb506dc67f806b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-03mb/google/skyrim: Disable USE_SELECTIVE_GOP_INITMartin Roth
This is causing some issues, so disable it until those issues can be resolved. BUG=b:271437658, b:271199389, b:270077971 TEST=Screen always lights up on boot & after S0i3 Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Id4aa441e4b4f76168f8243b6abafa1cf1ea08dbd Reviewed-on: https://review.coreboot.org/c/coreboot/+/73393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-03-03drv/i2c/ptn3460: Add 'mainboard' prefix to mainboard-level callbacksJan Samek
As discused earlier, the callback name 'mb_adjust_cfg' was considered too generic. The new naming is chosen to be consistent with other drivers' callback names designed to be used at mainboard level. Also other functions, namely 'mb_get_edid' and 'mb_select_edid_table' are renamed accordingly. BUG=none TEST=Builds for siemens/mc_apl{1,4,5,7} and siemens/mc_ehl boards complete successfully. Change-Id: I4cbec0e72e5f03e94df0faa36765d1a6cd873a7a Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-03mainboard/protectli/vault_ehl: Add initial structureKacper Stojek
This patch adds base code for the Protectli VP2420. The GPIO config has been extracted with inteltool from the stock firmware and then parsed with intelp2m. As of now, the platform runs with edk2 with no apparent issues. Signed-off-by: Kacper Stojek <kacper.stojek@3mdeb.com> Signed-off-by: Artur Kowalski <artur.kowalski@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: Ia00c27117d48b76db306d3f988f159fc5d50e4a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2023-03-02mb/google/rex: Enable VPURavi Sarawadi
BUG=b:270529665 TEST=Verify the build and boot on Rex board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I0e3d3312c546a2a468fb906a08b8d3ec3e96c46a Reviewed-on: https://review.coreboot.org/c/coreboot/+/72417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-02mb/starlabs/starbook/adl: Enable the PchHdaAudioLinkHdaEnable UPDSean Rhodes
Enable the PchHdaAudioLinkHdaEnable UPD so that the sound works. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie3493af340a42035ee537d83b1542be1b87d8f9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/71979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2023-03-02acpi/ec: Handle new host event EC_HOST_EVENT_BODY_DETECT_CHANGETim Van Patten
Handle the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE. Previously, the EC sent the host event EC_HOST_EVENT_MODE_CHANGE when body detection changed between lap/desk mode. However, that event is a wake event, which resulted in spurious AP wake events being triggered when the EC detected lap/desk mode changes while the AP was suspended. To resolve this, the new host event EC_HOST_EVENT_BODY_DETECT_CHANGE was added, which will not be a wake event. This CL adds handling for the new event to acpi/ec.asl to switch DPTC tables when a change is detected. BRANCH=none BUG=b:261141172 TEST=bodydetectmode on|off, verify host event is received Change-Id: Iabeb7891489a209f45504804355f1fa817082976 Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73298 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-03-02mb/siemens/mc_ehl*: Correct comment in gpio.cMario Scheithauer
There were two wrong comments in all mc_ehl gpio.c files. This patch corrects the incorrect comments. Change-Id: Iea356db177227d89b91be32a4e2367c612b77350 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72458 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-02mb/siemens/mc_ehl4: Remove TPM from devicetree and KconfigMario Scheithauer
This mainboard does not use security features like TPM. Change-Id: Ieebbf12fc844573ffadb089da78062dd2033517a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-02mb/siemens/mc_ehl: Move TPM Kconfig switches to variantsMario Scheithauer
The upcoming mc_ehl4 variant is the first Siemens Elkhart Lake mainboard without a TPM. For this reason, the corresponding Kconfig switches must be moved to variant level. To prevent Jenkins build from complaining, the TPM is removed in the following patch. Change-Id: Ic73ccd1b52e57c1cf1dd7337b0e28beaadbece8e Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-02mb/siemens/mc_ehl2: Set RGMII output impedance manuallyMario Scheithauer
Measurements have shown that the automatic calibrated values for RGMII output impedances are too low. For this reason, set the PMOS value to 16 and the NMOS to 13. Change-Id: Ic3382889d3281faccb03819f9680a9763703b2a1 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73019 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-02mb/siemens/mc_ehl4: Add new board variant based on mc_ehl1Mario Scheithauer
This mainboard is based on mc_ehl1. In a first step, it contains a copy of mc_ehl1 directory with minimum changes. Special adaptations for mc_ehl4 mainboard will follow in separate commits. Change-Id: I3c1f2cf4a3dcae58895f6d14a7fce46b2825e6ba Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72427 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-02mb/siemens/mc_ehl2: Fix GPIO settingsMario Scheithauer
With the latest hardware revision, the two GPIOs GPP_B15 and GPP_E19 are no longer connected to a native function. BUG=none TEST=Checked output verbose GPIO debug messages Change-Id: I266612f041b749aa83b366497b4211fc075c7bd7 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-03-02mb/google/rex: Generate LP5 RAM ID for `K3KL6L60GM-MGCT`Subrata Banik
Add the support LP5 RAM parts for rex: DRAM Part Name ID to assign K3KL6L60GM-MGCT 3 (0011) BUG=b:270708359 TEST=emerge-rex coreboot Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Id0925ccec014c9c535178ed3d908e60889df624d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-02mb/google/rex: Generate LP5 RAM ID for `H58G56BK7BX068`Subrata Banik
Add the support LP5 RAM parts for rex: DRAM Part Name ID to assign H58G56BK7BX068 1 (0001) BUG=b:270708359 TEST=emerge-rex coreboot Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I9eea7e277628992be9b7768a678a50425444002a Reviewed-on: https://review.coreboot.org/c/coreboot/+/73342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-02mb/google/brask/var/constitution: Enable Fast VMode for constitutionMorris Hsu
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP threshold. TEST=FW_NAME=constitution emerge-brask coreboot Change-Id: I1e68f708b7740567e24f8a3ddb9832aeec7ee6b5 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73247 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Pablo Ceballos <pceballos@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-01mb/google/brya/acpi: Remove extra DC boost byteTarun Tuli
The DC boost bit was intended to be in the Controller Params word rather than its own byte. Correct this error. BUG=b:214581372 TEST=build Change-Id: Ie65e57a351f0fc1f0c80ef320fd87043ee22916c Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73216 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-03-01mb/siemens/mc_ehl3/lcd_panel.c: Set LVDS re-power delay to 1 sJan Samek
The currently used panel type could work with 500 ms but increasing the value to 1 second allows to use a wider range of LVDS LCD panels, as many of them specify the delay of 1 s as minimum. BUG=none TEST=Test link stability using a panel with minimum re-power delay of 1 s. Change-Id: I2dd86e791c1212b67a80d7e6cfc474ad91b26c6b Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-02-28mb/amd/gardenia,pademelon/mainboard: use ACPI_SCI_IRQ definitionFelix Held
Use the ACPI_SCI_IRQ definition for both the PIC and APIC IRQ number in the fch_irq_map table. Before the PIC mapping was set to PIRQ_NC, but both mb/google/kahlee and the other amd mainboards using newer SoCs set both the PIC and APCI IRQ number to ACPI_SCI_IRQ, so change this here to match the other mainboards. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I29dde7ca8d2ecf00d8174c2d793ef1ad55ae3e28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73322 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-28mb/google/kahlee/mainboard: use ACPI_SCI_IRQ definitionFelix Held
Use the ACPI_SCI_IRQ definition instead of a magic value. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia860668b5c93b1b8882459d9f983cf3a23d16392 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73321 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-28mb/system76: Rename adl-p to adlTim Crawford
The directory holds boards other than ADL-P, such as ADL-U and ADL-H. Change-Id: I8e1b67f83d649cd07645a4a519ba1bf2f6f5e7c6 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-02-27mb/google/skryim: Add RECOVERY_MRC_CACHE FMAP sectionKarthikeyan Ramasubramanian
Enable HAS_RECOVERY_MRC_CACHE config and add RECOVERY_MRC_CACHE FMAP section to cache the MRC training data in recovery mode. BUG=b:270569389 TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS directory entry is populated with the appropriate MRC_CACHE FMAP section. Change-Id: I3f0f41c20b61c96473e887521f84f3ad240adc2b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-02-27mb/google/skyrim/var/winterhold: Use fw_config to probe FPEricKY Cheng
Use fw_config to probe fingerprint. BUG=b:269986245 TEST=emerge-skyrim coreboot chromeos-bootimage. Test result is pass with 1000 reboot cycles. Change-Id: I4b4bca42dd78dfd5b8636ff3cb05406d2d0c94f7 Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-02-27mb/google/brya/var/osiris: Enable Fast VMode for osirisDavid Wu
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP threshold. BUG=b:270640775 BRANCH=firmware-brya-14505.B TEST=Verify that the feature is enabled by reading from fsp log Change-Id: I35f577e1bab0f8dda10061903df13730e2c8ee04 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-27mb/google/brya/var/osiris: use RPL FSP headersDavid Wu
To support an RPL SKU on osiris, osiris must use the FSP for RPL. Select SOC_INTEL_RAPTORLAKE for osiris so that it will use the RPL FSP headers for osiris. BUG=b:270640775 BRANCH=firmware-brya-14505.B TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp coreboot-private-files-baseboard-brya coreboot chromeos-bootimage", flash and boot osiris to kernel. Cq-Depend: chromium:4290627, chrome-internal:5516851 Change-Id: If8de42a82fd85ffa8b9836e6024f119bc798f4fc Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-27mb/google/nissa/var/xivu: Disable world-facing microphoneIan Feng
Remove world-facing microphone for xivu360. Switching to world-facing camera will use the user-facing microphone to record sound. BUG=b:263927799 TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: Ibb720974b6488ce4453081e0bc5b4e7f34a6b0f6 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-02-27mb/google/dedede/var/dibbi: Improve USB2 strengthAmanda Huang
BUG=b:269786649 TEST=build and test USB2 port function works fine BRANCH=dedede Change-Id: I63928a0d8ce6b2365250fd96572f4a2db948c19d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2023-02-27mb/google/brask/var/constitution: use RPL FSP headersMorris Hsu
To support an RPL SKU on constitution, it must use the FSP for RPL. Select SOC_INTEL_RAPTORLAKE for constitution so that it will use the RPL FSP headers. BUG=b:267539938 TEST=emerge-brask intel-rplfsp coreboot coreboot-private-files-baseboard-brya Change-Id: Ie4f5eb6ebb372ad07308ff25c9eb69a83793c656 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73246 Reviewed-by: Pablo Ceballos <pceballos@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-27mb/google/brask/var/constitution: Update overridetreeMorris Hsu
Update override devicetree based on schematics. BUG=None TEST=FW_NAME=constitution emerge-brask coreboot Change-Id: I883a806950821e6306242975764930035a94888e Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73110 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pablo Ceballos <pceballos@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2023-02-27mb/google/rex: Remove `fixme` from gpio.hKapil Porwal
Remove `fixme` from gpio.h since it has been addressed. BUG=none TEST=Only a cosmetic change Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I79a2493dba6becd4b8c1ebf37e452a5a173eb396 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-02-27mb/amd/birman/bootblock.c: Skip EC configuration in SimNowFred Reitberger
SimNow does not support the Birman EC, so skip the EC configuration steps when building for SimNow. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I6e879a13a119d593674d3403d4e1b32e0e244d9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-27mb/amd/birman,chausie: Enable SimNow capabilitiesFred Reitberger
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ia7e594ca2b6ea3cd9d6f60e7dcd1ba6ebabf85cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/73165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-24mb/google/skyrim/var/winterhold: Remove gpio-keys ACPI node for PENHEricKY Cheng
Remove ACPI node for pen eject event to meet project design. BUG=b:265106657 TEST=emerge-skyrim coreboot chromeos-bootimage Change-Id: I732de49c6319397d93671c48a6518c7c7e955fdc Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73154 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-02-24mb/google/skyrim/var/crystaldrift: Generate RAM IDs for new memory partsYunlong Jia
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) MT62F1G32D4DR-031 WT:B 1 (0001) MT62F1G32D2DS-026 WT:B 2 (0010) H9JCNNNBK3MLYR-N6E 0 (0000) K3LKBKB0BM-MGCP 3 (0011) BUG=b:265190498 BRANCH=None TEST=emerge-skyrim coreboot Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: I860f10552e4e4180e09ab805ca82b108fdc8f21a Reviewed-on: https://review.coreboot.org/c/coreboot/+/73049 Reviewed-by: Jon Murphy <jpmurphy@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-24Revert "mb/google/brya/var/gladios: Update gpio table"Robert Chen
This reverts commit 3eb17b91daac0b3acaffb01568d724d23c6f0eea. Reason for revert: PLTRST only keeps 18xms and it's too short for eMMC disk fully reset. Change-Id: If4277cb600bfe4e071959dacaf204fe7d3518f68 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73202 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-24Revert "mb/google/brya/var/lisbon: Update gpio table"Robert Chen
This reverts commit 0e0f9e51c4c4f190cbe7ef5bffa138601c644d3c. Reason for revert: PLTRST only keeps 18xms and it's too short for eMMC disk fully reset. Change-Id: I13b93747bdb4d39de1ffcfdc020648871fa6e048 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73203 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-24mb/google/brask/var/constitution: update gpio settingsMorris Hsu
Update GPP_E12,GPP_E13,GPP_H19 in ramstage. Update GPP_F11 in bootblock. TEST=emerge-brask coreboot Change-Id: Icdca7f574282da140ec64cea9cdda3ebccbe3eb8 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73194 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Pablo Ceballos <pceballos@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-23mb/google/rex: Set audio GPIOs based on fw_configKapil Porwal
Define some actions based on probe results for audio: - Disable the SoundWire GPIOs when I2S option is selected. - Disable the I2S GPIOs when SoundWire option is selected. - Disable all the GPIOs when no audio is enabled. BUG=b:269497731 TEST=Test that GPIOs are configured based on the current value of the fw_config field in cbi. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I0ed452a0d08e6779add318d9bbd1e97b50b6aea9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-23mb/google/rex: Use gpio padbased table overrideKapil Porwal
In order to improve gpio merge mechanism. Change iteration override to padbased table override. And the following patch will change fw config override with ramstage gpio table override. Port of commit 7aef2b1294f2 ("mb/google/nissa: Apply gpio padbased table override") BUG=none TEST=Verify devbeep at depthcharge console Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I2ee86bbec7d25a35d726f29ad79891f1054bf52c Reviewed-on: https://review.coreboot.org/c/coreboot/+/73182 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-23intel/alderlake: remove skip_mbp_hob SOC chip configKapil Porwal
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP. This new option is hooked with `SkipMbpHob` UPD and is always disabled for RPL & ADL-N based ChromeOS platforms. It is not disabled for ADL-P based platforms because ADL-P FSP relies on MBP HOB for ChipsetInit version for ChipsetInit sync. As ChipsetInit sync doesn't occur if no MBP HOB, so it results S0ix issue. This limitation is addressed in the later platforms so creation of MBP HOB can be skipped for ADL-N and RPL based platforms. This made skip_mbp_hob SOC chip config variable redundant which is also removed as part of this change. BUG=none TEST=Build and boot to Google/Taniks. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ia396b633a71aedf592c45b69063ee0528840fd2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/71996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-02-23mb/intel/mtlrvp: Move MX98357A codec out of soundwire nodeYong Zhi
MX98357A is not a soundwire codec, so move it out of drivers/intel/soundwire node. BUG=none TEST=Build and boot MTL-P RVP to Chrome OS. Verify I2S audio card enumeration and no max98357a entry under /sys/bus/soundwire/devices. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Change-Id: I24fc7084ea18445c341eed012cfacde8de126fd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Usha P <usha.p@intel.com>
2023-02-23mb/google/skyrim/var/crystaldrift: Update devicetree settingYunlong Jia
Setup FW_Config for our project. Configure USBHub\PIXA Touchpad\Audio(rt5682s & alc1019). BRANCH=None BUG=b:262798445, b:268621319 TEST=emerge-skyrim coreboot Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: I2c590ae36d4d089f70e1799189cd414f825e5b8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chao Gui <chaogui@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-22mb/google/*: Resume from suspend on critical batteryIvan Chen
This patch makes EC wake up AP from s3/s0ix for OS shutdown/hibernate when the state of charge drops to low_battery_shutdown_percent. BUG=b:255465618 TEST=emerge-nissa chromeos-bootimage (EC: https://crrev.com/c/4243898) Verify system resumes from s0ix and then enter S5 on nivviks with steps: 1. disconnect AC 2. powerd_dbus_suspend --disable_dark_resume=false 3. fakebatt 5 4. fakebatt 4 Change-Id: I63b5246432687e38ddfc5733ac3a115c3456d7e9 Signed-off-by: Ivan Chen <yulunchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73082 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-02-22Revert "mb/google/poppy: Nami - invoke power cycle of FPMCU on startup"Subrata Banik
This reverts commit 2e6fa8206e0a3bdd2e53542b6377fe2b37e3f26e. Reason for revert: causing `redefinition` issue. src/mainboard/google/poppy/variants/nami/gpio.c:527:26: error: redefinition of 'variant_romstage_gpio_table' const struct pad_config *variant_romstage_gpio_table(size_t *num) ^ src/mainboard/google/poppy/variants/nami/gpio.c:426:26: note: previous definition is here const struct pad_config *variant_romstage_gpio_table(size_t *num) ^ Change-Id: I107cce8bf3a5bf38edb39b9d46512ee0d467d354 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73210 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-02-22mb/google/dedede/var/dibbi: Enable USB2 port 6Sam McNally
USB2 port 6 may be used for a PL2303 USB to UART bridge, so enable the port. BUG=b:269690930 TEST=kernel can detect a PL2303 USB device BRANCH=dedede Change-Id: I0ba421c3a502e69d101de40bbd31122211d3fb05 Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-02-22mb/google/poppy: Nami - invoke power cycle of FPMCU on startupTarun Tuli
Add functionality such that the FPMCU is power cycled long enough on boot to ensure proper reset. This solution relies solely on coreboot to sequence the power and reset signals appropriately (150ms on boot). BUG=b:245954151 TEST=Confirmed FPMCU is still functional on Nami. Confirmed power is off for 150ms seconds on boot. Confirmed RCC_CSR of FPMCU indicates power cycle occurred. Confirmed reset is de-asserted approx 3ms after power application (target >2.5ms) Change-Id: I21eb85dc11e0ea0eb5de8a6092b01663d3c3df91 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68820 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-21mb/google/skyrim/var/markarth: Update Elan touchscreen power sequenceJohn Su
Based on product spec v1.4, update T3 timing from 180 ms to 150 ms. BRANCH=none BUG=b:262734395 TEST=emerge-skyrim coreboot chromeos-bootimage Then the Elan touchscreen works fine. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I0d8f1e008276fccdfbb8c76cfebaccbe71160b64 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73130 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-02-20mb/google/brya/var/skolas: remove disable_package_c_state_demotionNick Vaccaro
Package C state demotion is now disabled for all RPL SoCs from within soc/intel/alderlake/fsp_params, so no need to duplicate that in the skolas devicetree.cb. BUG=268296760 BRANCH=firmware-brya-14505.B TEST=Boot and verified that S0ix issue is resolved. Change-Id: I1c630e2efbdddd18a5423c79b73269e9b1be79c7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-02-20soc/intel/{tgl,adl}: Hook up D3ColdEnable UPD to D3COLD_SUPPORTSean Rhodes
Select NO_S0IX_SUPPORT for `starlabs/starbook` and `atlas/prodrive` so their configurations are unchanged. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I718952165daa6471f11e8025e745fe7c249d3b46 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72800 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-19treewide: Remove useless "_STA: Status" commentElyes Haouas
Change-Id: I99ded00fa6dadb494c1523d00063dbc1fde95614 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73093 Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-18mb/google/geralt: Report SKU ID and panel ID for unprovisioned devicesYidi Lin
To make MIPI/eDP panel functional on unprovisioned devices, it requires passing SKU ID and panel ID info to the payload(depthcharge) to load the corresponded device tree for kernel. BUG=b:247415660 TEST=cbmem -1 |grep "SKU Code". Change-Id: Id2254729b7bd621d1e9bc520e8f40916d0f81030 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73076 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-17mb/protectli/vault_cml: Disable PTT and SPI TPMMichał Żygowski
The platform supports a discrete LPC TPM module. However, ME firmware enables PTT by default and descriptor is configured for SPI TPM on the platform's original firmware. So disabling PTT in ME is not enough, because it falls back to SPI TPM. Ensure PTT is disabled in ME and SPI TPM is disabled in descriptor soft straps. TEST=Boot VP4650 and see LPC TPM is recognized by coreboot. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I3764e085f2eb5ae957b9087d150320def7af4fc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2023-02-17mb/protectli/vault_cml: Add Comet Lake 6 port board supportMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: If1b4f9c8245a082ff875ae9c6102a1c45e677d0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2023-02-17mb/google/skyrim/var/frostflow: Update Elan touchscreen power sequenceFrank Wu
Based on product spec v1.4, update T3 timing to 150 ms from 300 ms BRANCH=none BUG=b:269041202 TEST=emerge-skyrim coreboot chromeos-bootimage Then the Elan touchscreen works fine. Change-Id: Ie5bd4bc2c8be2e43470edd374af0623162067497 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Chao Gui <chaogui@google.com>
2023-02-17tree: Use __func__ instead of hard-coded namesElyes Haouas
Change-Id: I87e383ce2f28340dbc3c843dbf2ed0e47c00a723 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17mb/roda/rv11: Remove unuseful "_ALR: Ambient Light Response"Elyes Haouas
Change-Id: I3a846d8e4b70ccb3e6fde448c00376cd0088716c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17mb/rodarv11: Remove unuseful "_ALI: Ambient Light Illuminance"Elyes Haouas
Change-Id: I0cbdcd5a787d99e2579a312a51c63d7fc4120462 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17treewide: Remove unuseful "_AEI: ACPI Event Interrupts"Elyes Haouas
Change-Id: I58a4e4fbd1a43462147daa58a5fda767cfd59c06 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17treewide: Remove unuseful "_ADR: Address" commentElyes Haouas
Change-Id: Ib968fe7f9f95e8f690b46b868fd7d6f9332b4c9a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72664 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17treewide: Remove unuseful "_UID: Unique ID" commentElyes Haouas
Change-Id: I150a4ed94bcaead6eb45f1c4b4952ae6957e0940 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17treewide: Remove unuseful "_CID: Compatible ID" commentElyes Haouas
Change-Id: I7db69e2faf412b9c6732f6dfc362d5774094ef27 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17treewide: Remove unuseful "_HID: Hardware ID" commentElyes Haouas
Change-Id: I5eb1424e9e6c1fbf20cd0bf68fbb52e1ec97f905 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-17mb/hp/z220_series: Reorder Kconfig selects alphabeticallyFelix Singer
Change-Id: I4035fabd46b1ba7fa5463abb7f780aeccd6a96e0 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-02-17mb/google/dedede/var/dibbi: Update devicetree for enabling audioSam McNally
Enable HDA device and update jack codec HID from ALC5682I-VD to ALC5682I-VS. BUG=b:268309238 TEST=kernel detects audio DSP and rt5682s BRANCH=dedede Change-Id: Icd17d5009ab8ef4711bb6c5fa414a8188fc0912f Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-17mb/google/nissa/yaviks: Tuning eMMC DLL value for eMMC initialization errorchia-ling.hou
BUG=b:265611305 TEST=Reboot test 2500 times pass Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: I2b114cac58a7fadeaee6d48996cb8b51f192e78f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-02-16mb/scaleway/tagada: Drop supportFelix Singer
According to the author of the mainboard scaleway/tagada, the mainboard is not used anymore. Since the mainboard is not publicly available for purchase and not used anywhere else, the usual deprecation process of 6 months is not needed. Thus, to reduce the maintenance overhead for the community, support for the following components will be removed from the master branch and will be maintained on the release 4.19 branch. Also, add a note to the 4.20 release notes. * Mainboard Scaleway Tagada Change-Id: Ifb83b8f2b1dc40cbef657e52c629948dc466ec6e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72915 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-16mb/google/brya: Add new baseboard hades with variants hadesEric Lai
Add a new baseboard for hades, an Intel RPL based reference design. Also, add variants for the reference boards hades. This commit is a stub which only adds the minimum code needed for a successful build. Need update gpio and memory DQ pins after final shchematic comes out. BUG=b:269371363 TEST=abuild -a -x -c max -p none -t google/brya -b hades Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ib7fbdf997df8225cc7814a34f8b4e4e04884dbf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-02-16mb/google/geralt: Pass XHCI_INIT_DONE to the payloadYidi Lin
BUG=b:269059211 BRANCH=none TEST=emerge-gralt coreboot Change-Id: Ia2ec6db332939f1ac629cda9a0784a12c92d91da Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73056 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2023-02-16mb/intel/adlrvp: Fix RTD3 timing for PCIe slot1Cliff Huang
Fix RTD3 timing for adlrvp_p_ext_ec and adlrvp_rpl_ext_ec. BUG=none BRANCH=firmware-brya-14505.B TEST=Insert a SD card or NIC AIC on PCIe slot1 and run 'suspend_stress_test -c 1'. The RP8 should not cause suspend issue. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I792c55a6361d1eae55cc6f668a03dc2503120fe1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72422 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-16mb/amd/birman&mayan: Use relative address as EC FW locationZheng Bao
When the flash size is over 16M, the absolute address could be lager than 16M, which can not be taken by CBFS. For the relative address, it is more flexible. This is one of series of patches to support 32/64M flash. BUG=b:255374782 TEST=binary identical test on birman and mayan when CONFIG_BIRMAN_HAVE_MCHP_FW and CONFIG_MAYAN_HAVE_MCHP_FW are set as y. Change-Id: I65be3039cd3449bfb481ad87281b72e88a58bd45 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-16mb/ocp/deltalake: Set SMM console log level via VPDJohnny Lin
Select DEBUG_SMI and RUNTIME_CONFIGURABLE_SMM_LOGLEVEL. Tested=On OCP Delta Lake, SMM log level can be changed via VPD variable. Change-Id: I73afc944fbd6c21e884397f3049bd363e2c1ce2c Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47006 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2023-02-16mb/google/rex: Mark unused USB ports as emptySubrata Banik
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid prompting wrong dmesg as below. ``` usb usb2-port3: Cannot enable. Maybe the USB cable is bad? ``` Mainboard variants to override the USB ports as per the target board design. TEST=Able to build and boot google/rex with all USB ports are working as expected. Change-Id: Ic3d21151a22f2318413f480f3386bf2dbf696307 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-16mb/google/brask/var/aurash: Initiate coreboot settingZoey Wu
Initial Aurash configuration base on moli design. 1. Set up gpio. 2. Add memory config. 3. There is no SD card setting on aurash, remove it from overridetree. 4. Follow moli psys schematic design. 5. Enable BT offload. BUG=b:269063331 TEST=emerge-brask coreboot. Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com> Change-Id: Ia9088cc2937bab72c8c22af592392384a10616a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ricky Chang <rickytlchang@google.com>
2023-02-15mb/hp/snb_ivb_laptops: Clean up USBDEBUG_HCD_INDEX settingFelix Singer
Change-Id: Iab21376d1887b0c79ea463885520781d042b040d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-15mb/google/brya/var/omnigul: Add memory parts supportJamie Chen
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1) Samsung K3KL8L80CM-MGCT 2) Hynix H58G56BK7BX068 3) Micron MT62F1G32D2DS-026 WT:B 4) Micron MT62F512M32D2DR-031 WT:B 5) Hynix H58G56BK8BX068 BUG=b:264340545 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I1f650c7e90804e871572f42ac925da85afd7f9d3 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72886 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyle Lin <kylelinck@google.com>
2023-02-15mb/intel/mtlrvp: Enable mipi_camera for MTL-P RVPUsha P
Add support for MTL-P RVP mipi camera functionality BUG=None TEST=Build and boot MTL-P RVP to Chrome OS. Verify SSDT entries related to mipi camera and verify camera working. Scope (\_SB.PCI0.I2C1) { Device (CAM0) Scope (\_SB.PCI0.I2C0) { Device (CAM1) Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I698edd7155fc38477f3416900799e61d3295fd1a Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Harsha B R <harsha.b.r@intel.com>
2023-02-15mb/intel/mtlrvp: Enable Audio for MTL-P RVPUsha P
This patch adds FW_CONFIG and codec support for MTL-P RVP BUG=None TEST=Build and boot MTL-P RVP to Chrome OS. Verify audio codec listed under aplay -l and audio working with the connected audio card. localhost ~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sofrt5682 [sof-rt5682], device 0: Headset (*) []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 1: Speakers (*) []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 5: HDMI1 (*) []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 6: HDMI2 (*) []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 7: HDMI3 (*) []   Subdevices: 1/1   Subdevice #0: subdevice #0 card 0: sofrt5682 [sof-rt5682], device 8: HDMI4 (*) []   Subdevices: 1/1   Subdevice #0: subdevice #0 Signed-off-by: Usha P <usha.p@intel.com> Change-Id: Ib29ac3e4105e578e1555076d180b35a8265a99c8 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-15mb/asrock/b75pro3-m: Reorder Kconfig selects alphabeticallyFelix Singer
Built asrock/b75pro3-m with BUILD_TIMELESS=1 and coreboot.rom remains the same. Change-Id: I8db6b870f2d4aac35766717866b519921d270f9e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-15mb/amd/chausie,mayan: Use common missing APCB warningFred Reitberger
Use the common missing APCB warning when the APCB is missing Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ie6303bc3457731bcac322770c4c08712f89fce3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/73003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-15soc/amd/common: Move missing APCB warning to common areaFred Reitberger
Move missing APCB warning from birman to amd/common so that other mainboards can utilize the same warnings if the APCB is missing. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I7ae689726ae4f7ccdf6959e47cbb5aee15cdb690 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-15mb/google/brask/var/constitution: update gpio settingsMorris Hsu
Configure GPIOs according to schematics TEST=emerge-brask coreboot Change-Id: Ib27f1c334cad47b3be57f57b7cc8ca5530118328 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72945 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-15mb/google/brya/agah: Adjust i2c1 and i2c2 timing Parameters for 400KHzTarun Tuli
Adjust timing parameters on i2c1 and i2c2 to meet timing requirements. For SCL, the t-high time is now over the min 600ns requirement for 400KHz operation (measure at over 700ns). Also, this change does not violate other parameters - rise time, setup time and hold time. BUG=b:264704732 TEST=Verified all timings meet spec now Change-Id: I0e92b2c9c25e7fb5fa7082af3f4a88da168c3ef2 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-15mb/google/brya/acpi: Update checksum in NVPCF DSM subfunctionTarun Tuli
The NVPCF DSM subfunction specified a incorrect checksum. Update this function to the proper checksum of 0xaf. BUG=b:214581372 TEST=build Change-Id: Ib58bd6cc10703ca67a7a4f520273865a95a4702b Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-15mb/intel/mtlrvp: Enable S0ixUsha P
This patch enables S0ix for MTL-P RVP platform BUG=None TEST=Able to enter low power idle S0 on MTL-P RVP Signed-off-by: Usha P <usha.p@intel.com> Change-Id: Id84f21d81197e44d6dd0dd8888c80848aa3679e0 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71994 Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Harsha B R <harsha.b.r@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
2023-02-15Revert "mb/google/brya/vell: Add PS1/PS2 cutoff point"Shon Wang
This reverts commit e30695dbe196ea42864ad03af799706eaae11f02. for meet thermal criteria, modify PS1/PS2 cutoff to default value BUG=b:229803757 BRANCH=brya TEST='FW_NAME=vell emerge-brya coreboot' Change-Id: Ie009788116f1e25db8aed2df58102a316a8aeef2 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72833 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-15mb/google/brya: Add Kconfig for TPM I2C busZoey Wu
Add TPM I2C for aurash to avoid TPM I2C fail. BUG=b:269050049 TEST=emerge-brask coreboot. Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com> Change-Id: I1947d2e1189f46d8dab01837f75de7cb6e9e0579 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 22:58:45 +0000