summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2016-02-09ASL: Remove unused local variables.Vladimir Serbinenko
Change-Id: Ifcbb6916b718d41fb9cda537ffdc3e652e13cbbf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13620 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mainboard/lenovo: Add support for the Lenovo ThinkPad X220iChristopher Spinrath
The ThinkPad X220i is essentially identical to the ThinkPad X220 but it has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard directory and setting the VGA_BIOS_ID in Kconfig. Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90 Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-on: https://review.coreboot.org/13594 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-02-09intel/kunimitsu: Clean up GPIOs.Pratik Prajapati
Some of the pins are not connected/used on kunimitsu board, this patch will make them "Not connected". Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BRANCH=none BUG=none TEST=Build and booted in kunimitsu. Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488 Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316700 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mb/intel/d510mo: Explicitly select NIC on PCI in devicetreeDamien Zammit
While the board configuration still works without this, It's nicer to have the device statically defined since the NIC is hardwired to the board. Change-Id: Ic6682865dd17672c3782bfba9511cd120d1657c1 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13455 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09google/lars: Set I2C[4] port voltage to 1.8vdavid
As the audio card needs 1.8V I2C operation. This patch adds entry into devicetree.cb to set I2C port 4 operate at 1.8V. TEST=Built & booted lars board. Verified that I2C port 4 is operating at 1.8V level Change-Id: Ia77841a26d024785d53251ca4b17afcf77f36a5b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e431e7acd85f6d7bf9d47f54ed41c48b8276071c Original-Change-Id: Iccc85a5e3bbf2b5362665036e1294a6635e38fbe Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321000 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09skylake mainboards: Enable backing up VBNV from CMOS to flashDuncan Laurie
Enable the option to back up Vboot non-volatile data from CMOS to flash as these boards have the necessary nvram fmap region and are using vboot2 which does not backup to the TPM. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45 Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324123 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13601 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09google/veyron_rialto: Remove developer mode switchAlexandru M Stan
The developer mode gpio switch on rialto is always hardcoded (through a resistor) as developer mode. We need to ignore it to allow transitions to verified mode with the virtual developer mode stuff. TEST=We can now exit dev mode on rialto Change-Id: I94a949f0973132de5fd008224af79cf612151193 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e78bb8f81eaa9c082e47ad818b64843c2565d00b Original-Change-Id: If11d752d58a5f26fc270ef01b529dad18b4cce46 Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325861 Original-Commit-Ready: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13626 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09intel/kunimitisu: set oem_id oem_table_id fields of acpi_header_tFang, Yang A
kunimitisu platform updated these two fields if maxim codec is detected. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10 Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324631 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13603 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/intel/galileo: Add board_info.txtLee Leahy
Add missing file to fix complaints by git commit script. TEST=None Change-Id: I4aac63821a7208fb86fa6c0dda16b7537e49a69a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kcma-d8: Add initial ASUS KCMA-D8 supportTimothy Pearson
Change-Id: Idefa304a27823c741fab72ff5c2f20fed1aa5a39 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13523 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kcma-d8: Copy ASUS KGPE-D16 for initial support workTimothy Pearson
Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work around Jenkins failures caused by an unmodified clone. Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13521 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kgpe-d16: Add CPB control CMOS optionTimothy Pearson
Change-Id: I28ad2298ad4dfb428dcd41a4f00db88c5e817cd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13173 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-05mainboard/asus/kgpe-d16: Update power LED handlingTimothy Pearson
- Stop blinking when coming out of standby. - Remove code to set blink when going into S3. This never worked correctly. Change-Id: I958990f3203d3cbe7ae64833800d631c1034327f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13171 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04mainboard/intel/galileo: Add Intel Galileo Gen 2 SupportLee Leahy
Add the files to build soc/intel/quark and mainboard/intel/galileo for a minimal coreboot image. Please note that this configuration does not run. Include HTML documentation for the Galileo Gen 2 board. Testing is successful if build completes successfully. TEST=Build for Galileo Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13507 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
These devicetree patches set the ACPI PM Disabled variable to 1. This will disable the ACPI PM timer and remove from FADT table. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319362 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13589 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/lars: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=None Change-Id: I331f25ad4764cab972af7198f6154f604d2dbeae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c1cb04645cbf34696e6adf48acec9d396e87ca9 Original-Change-Id: I8d14ea16b2d07bbf04c5c33e4205a85d9f21847b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324075 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13585 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/kunimitsu: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built kunimitsu w/ separate verstage. Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6 Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324074 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13584 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/glados: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built glados w/ separate verstage and booted. Change-Id: I626a500c183d21f94d976e24f09af15a242fba9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b564514a8b93f53a919fcdac3589e30dbac82124 Original-Change-Id: Icc989ec5700b3f1a144a6b41198b7dd2c2aac6f7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324073 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13583 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chell: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built chell w/ separate verstage and booted. Change-Id: Ic728c2904006376fdc2b27b512f72173a2260be3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 42d190af8996fea894305ebe686afbfda5f2b8a5 Original-Change-Id: I95aeb97737d0ddfa6c53269c9d14db16ed5e47cc Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324072 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13582 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02src: Fix various spelling and whitespace issues.Martin Roth
This fixes some spelling and whitespace issues that I came across while working on various things in the tree. There are no functional changes. Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-02asus/f2a85-m: Configure Hudson to be legacy-freeLoic
Change-Id: I67271f2a209fc96eea6181f8875a5e69cf98d8c4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13511 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-02Kconfig: indent with tabs, not spaces.Martin Roth
Change-Id: I8996f8ab739a07014a4189738b5624485d752d9d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13540 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02src/: Fix Kcofig symbols missing CONFIG_ prefixMartin Roth
- Add CONFIG_ prefix to two symbols. - Remove the use of the third symbol as it will never be matched. Change-Id: Ifa7f6884001cb05fb8397f193c4b08a0161f498c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13539 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-01mainboard/asus/kgpe-d16: Wait for all APs to stop before MCT setupTimothy Pearson
Under certain conditions when the APs are still executing during MCT setup the system can hang. This was the root cause of most of the S3 resume failures on this platform; waiting for AP stop before MCT setup allows for reliable S3 resume. Change-Id: I329eea9a8912d7b57efe6aae327d24fd6c3fd782 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13169 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Use W83667HG-A specific PS/2 ASL fileTimothy Pearson
Change-Id: I5a4e223b2e247decd30d8fb2a083be4cff6500a4 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13166 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Update DSDT with new devices and bump versionTimothy Pearson
Change-Id: I15fedb067f1911799f7528b60b8754f2984b38ec Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
On certain Winbond SuperIO devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. Add auxiliary channel PS/2 device presence detect, and update the Winbond W83667HG-A driver to flag the auxiliary channel as disabled if no device was detected. Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Add support for lifted BSP APIC IDsTimothy Pearson
Change-Id: Ic4b68a032068208d56b2a04150f7fc7d61b38eba Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13164 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Add missing IRQ route to mptableTimothy Pearson
The IOMMU/HT device was not routed correctly; add the proper APIC mappting to the mptable generation code. Also clarify comments surrounding the pin mappings. Change-Id: I72ceb0f22dabdfa71a1f6231ccb841face08ff7a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13163 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Clean up legacy PIRQ table codeTimothy Pearson
Change-Id: Ib4f46944f076f1e696cf16a1e532eb8635b603c9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13162 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Use W83667HG-A SuperIO instead of NCT5572DTimothy Pearson
Change-Id: If67999098fbe2831eeb30cb8b362c558db5d2688 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13157 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-01-31stout: Fix VGA PCIIDs.Vladimir Serbinenko
Change-Id: I7dcde170d0f59ea9886342c0d2c09b70b9d0d84d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13537 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-01-29mainboard/cubieboard: use bootblock_mainboard_early_initIru Cai
since commit f1e321001d5954096f06f9a43138219a9a46536e, the UART init should be in bootblock_mainboard_early_init() which runs before console init. (see src/lib/bootblock.c) Change-Id: Ib00afdd6e81e7689fbd743c8a5f547d424896d71 Reviewed-on: https://review.coreboot.org/13448 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29google/peppy/Kconfig: Move select MAINBOARD_DO_NATIVE_VGA_INITJean Lucas
Move the default select of "Use native graphics initialization" for Peppy to the ChromeOS section as SeaBIOS (default payload) requires a vBIOS and takes twice as long to load with this option enabled. For the same reasons, this option shouldn't be enabled by default (def_bool y). Change-Id: I1f2163e0a1e4bf8e5041dad150bdf7de804fb4db Signed-off-by: Jean Lucas <jean@4ray.co> Reviewed-on: https://review.coreboot.org/13493 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-29mainboard/asus/kgpe-d16: Use stock PS/2 ACPI ASL fileTimothy Pearson
Change-Id: Iad724e9e1d3e64e2af3f74fed9dec30aa34e2af5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13153 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-29mainboard/asus/kgpe-d16: Enable ASUS MIO audio optionTimothy Pearson
The KGPE-D16 supports an optional MIO audio card, which connects to the on-board HDA interface of the SP5100. Enable the HDA interface for use with the MIO card. Change-Id: Idfe069f4bce7b94a7460bc7fcdd378eb57e51fda Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13152 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-01-29mainboard/asus/kgpe-d16: Move memory test before IMD setupTimothy Pearson
Change-Id: Ic6fbf6688e4c2adc85e4eb9fa17e79d29dda58c0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13151 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Remove PMBASE settings and commented code.Damien Zammit
Fixed incorrect comment regarding port 80 LPC route. Change-Id: Ifbb73753d5a0737418b869085f2329a02504e5dc Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13466 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Remove copy-pasted cstatesDamien Zammit
Change-Id: I5b6edbd97d4e6ed8b03f2f319a338022647e26ea Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13465 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Move MMCONF base address to 0xe0000000Damien Zammit
Change-Id: I3873d92069cc1d113a8092d609d1768ff45cbd45 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13129 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2016-01-29nb/intel/x4x: Move to early cbmemDamien Zammit
Previously with errors in the ram init, early cbmem was disabled. Now that the ram is working correctly, set as early cbmem platform and update all (1) boards to use it. Tested on GA-G41M-ES2L Change-Id: I5925c28821537f0e326b4f5a2ac39778e4724a3c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13131 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-28src/: give scripts a .sh extension for easy identificationMartin Roth
Just rename the two scripts that are in the src/ tree to give them a .sh extension. Since we generally expect files in the src directory to be source files, this allows to identify these as scripts easily. Change-Id: I0ab20a083880370164488d37a752ba2d5a192fdc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13432 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-28intel/strago: Update DPTF parameters to higher temperature.Divagar Mohandass
Fish bowl HTML5 graphics benchmark with 250 fish is not reaching 60 FPS. This change will update the DPTF parameters to accommodate this test. TEST=Run fish bowl benchmark with 250 fish and check for 60 FPS. Change-Id: I6b6827199cb0f5ab44c354abc477ea73e4de9ec5 Original-Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/302208 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13484 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix for auto wake from S5Hannah Williams
Disabling S5 wake from touch panel and trackpad TEST=Build and boot the platform. TEST=Poweroff platform -> enter PG3 -> remove AC -> close Lid Plug AC in -> EC boots up and AP will shutdown the platform and open Lid -> platform boots to OS. Change-Id: I7b661a9f1327b97d904bac40e78612648f353e39 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/288970 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Divagar Mohandass <divagar.mohandass@intel.com> Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Reviewed-on: https://review.coreboot.org/13425 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Fix for Crossystem "wpsw_cur" statusKumar, Gomathi
The GPIO mapping was incorrect for wpsw_cur. The GPIOs for East community are in two ranges - 0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and 12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26] The discontinuity was not accounted for, hence the error.Original offset was 0x16 whereas it should be 0x13 TEST=Run crossystem and test wpsw_cur entry. If screw is present, it should be 1 and if not present, it should be 0 Change-Id: I29e19589b3a358a42818afbc6d017d6cbc6a9c4c Original-Signed-off-by: Kumar, Gomathi <gomathi.kumar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291572 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Icarus W Sparry <icarus.w.sparry@intel.com> Reviewed-on: https://review.coreboot.org/13424 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix issues found during static code analysisRavi Sarawadi
TEST=Build, boot to OS Original-Reviewed-on: https://chromium-review.googlesource.com/299483 Original-Reviewed-by: Aaron Durbin <adurbin@google.com> Change-Id: I738003b8dfff6a5255085d39e378e18d6ad36bcf Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/12738 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Get Boot Flash Write Protect statusHannah Williams
Read GPIO to get the status Change-Id: Id2d56ce4b47c4cccba2de3f113afaee6c49885c9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13186 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Braswell: Separate L1 Sub State init procedure for boards.Kenji Chen
Original-Reviewed-on: https://chromium-review.googlesource.com/312743 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Change-Id: Ib0a891f229477cf359bff6cd02f305606468f07f Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Kenji Chen <kenji.chen@intel.com> Reviewed-on: https://review.coreboot.org/12750 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Strago: Enable CA MirrorShobhit Srivastava
Configuring UPD PcdCaMirrorEn. This is a board specific parameter. CA mirror is the Command Address mirroring option that is enabled on this board CQ-DEPEND=CL:13038 Original-Reviewed-on: https://chromium-review.googlesource.com/309190 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I05174e18d650332d838e5036c713e91c4840ee75 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12749 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/cyan: Disable SD Card Detect Simulation in FSPHannah Williams
CQ-DEPEND=CL:12742 Change-Id: Ifc95809e342d87f863dd60967f5b3a6ca5c0f7b3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13036 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Strago: Disable SD Card Detect Simulation in FSPHannah Williams
CQ-DEPEND=CL:12742 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I6c39ffebe407a4ef8555b2f050a96d33709dc624 Reviewed-on: https://review.coreboot.org/13035 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Remove support for older rev boardsHannah Williams
Cleaning up code to remove support for early revs of Strago board Change-Id: Ic0647a17d78164fd7dfadc731c9395a8ba08c235 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13434 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Configure Boot Flash Write Protect status GPIOHannah Williams
Set up the GPIO(MF_ISH_GPIO_4) to read WP status. TEST=Use crossystem to read the WP status Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I17cbcba013e2a11c2527731df985aa1243065eff Original-Reviewed-on: https://chromium-review.googlesource.com/302424 Original-Tested-by: John Zhao <john.zhao@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13185 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Enable native mode on sd card cd lineJagadish Krishnamoorthy
Configuring Native Mode enables the card present bit in sd card controller register. TEST=Sd Card Plug/Unplug should work in OS and DepthCharge. Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2f017bdd7125f324fb58a88485cd83110851fbc5 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12741 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Disable unused lines on Gpio North BankJagadish Krishnamoorthy
The unused lines leads to spurious interrupts on few of the systems. TEST=run suspend_stress test and make sure that kbd is working. Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313417 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13176 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix DSP clockfdurairx
The codec clock frequency was incorrectly set to 25MHz. The only available frequency is 19.2MHz through external clock and PLL. Original-Reviewed-on: https://chromium-review.googlesource.com/295768 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I9bef334a5a3aaee28fcc4937180896ff49969bc5 Signed-off-by: Felix Durairaj <felixx.durairaj@intel.com> Reviewed-on: https://review.coreboot.org/12732 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28mb/intel/d510mo: Use SATA AHCI by defaultDamien Zammit
Change-Id: I6f9772c5bcf9a50dfbc3d1cfaeb79f4454d1fb27 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13454 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-01-28mb/intel/d510mo: Use native gfx initializationDamien Zammit
Change-Id: Ic4de7a762e90b379be3814afc61467e1cd099215 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13034 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-28mb/intel/d510mo: Add CPU, SMI-trap and PIC to DSDTDamien Zammit
Change-Id: I80853cadb4762d9bb34926e31d65d248c5683417 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13453 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-28mb/intel/d510mo: Add missing GPIO and GPENDamien Zammit
Change-Id: I56c0a55d57d8beabcb33cf1984b037556a71a8b9 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13452 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-28nb/intel/pineview: Native VGA init (CRT)Damien Zammit
VGA grub console works but display wobbles left/right drm/i915 driver reports one error: - [drm:i915_irq_handler] *ERROR* pipe A underrun - Monitor does not display 1920x1080 after modeset - Other resolutions look out of sync Cause: suspect single bug in raminit (chipset init) Change-Id: I2dcf59f8f30efe98f17a937bf98f5ab7221fc3ac Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12921 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Set LPC_CLKRUNB to PU_20K to solve leakage issue.Kane Chen
LPC_CLKRUNB pin needs to be set to PU_20K to prevent leakage TEST=Test on Strago and make sure the leakage is gone Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: Id2bf7511806cdc52b505bb469238a9465b356352 Original-Reviewed-on: https://chromium-review.googlesource.com/317020 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Tested-by: Kane Chen <kane.chen@intel.com> Original-Commit-Queue: Kane Chen <kane.chen@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13175 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: EC_IN_RW gpio input configuration.Divagar Mohandass
Configure EC_IN_RW signal as gpio input. TEST=Boot to Chrome OS in normal mode and enter recovery mode use ctrl-d to switch to Dev mode. Change-Id: I835a1c70d89ef2ab75c35233f889124b60bb64a3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304040 Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-by: Gomathi Kumar <gomathi.kumar@intel.com> Original-Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Shobhit Srivastava <shobhit.srivastava@intel.com> Reviewed-on: https://review.coreboot.org/13124 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Clean up DDR configuration.Divagar Mohandass
This change includes following changes: - Clean up the DDR configuration and flow. - Removing support for non LPDDR3 boards. - Supporting only LPDDR3 and PMIC config. TEST=Build/flash CB and boot the platform to OS. Change-Id: I8369443da728a4c07e0c1a82040d94034c3542da Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/297941 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Jenny Tc <jenny.tc@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13122 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28intel/strago: Disable unused devices.Divagar Mohandass
This change will disable unused devices in device tree to improve boot performance. TEST=Build/Flash CB and boot to OS. verify Touch screen, Audio, WIFI and Track pad functionality. Change-Id: Ib5ae31c96d75f9a5b0f8d8b72d058e18fe7d7e67 Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/300943 Original-Reviewed-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Gomathi Kumar <gomathi.kumar@intel.com> Reviewed-on: https://review.coreboot.org/13423 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-27intel/strago: Fix GPIO configHannah Williams
Fix GPIO config for this board: - SD card detect to GPI - SATA GPI to not used - GPIO_SUS1 and GPIO_SUS11 to GPI with pull up (1K and 20K)termination - I2C4 SDA and SCL from not used to Native Change-Id: Iecb23df465a540a71f7268c5aac48617dc74ebf2 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13431 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-27intel/sklrvp: Remove mainboardMartin Roth
The Intel Skylake RVP3 mainboard is not building, and according to Intel, there is no plan to continue working on it for coreboot. The intel/kunimitsu board is the Skylake reference design for coreboot.org. Change-Id: Icb4e42fdb560cc3188ca29c465674f5e0b11569b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13469 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-01-26ga-g41m-es2l: Instead of forcing native VGA, make it selectableMartin Roth
This allows the native VGA to be disabled for debug, or if someone wants to use the vbios. Change-Id: I59a94fa0d02bfe254c8a598e15d3d9d73ecfe650 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12848 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-01-26mainboard/intel/d510mo: Licence fixes and azalia verb tableDamien Zammit
Azalia verb table replicated from vendor bios. Licence headers added where appropriate. Change-Id: I29e4fe433dee6c5f30fe36055fc9a8bf2062fef5 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12621 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-01-25mc_tcu3: Enable auto generated attributes in cbfsWerner Zeh
Use CBFS_AUTOGEN_ATTRIBUTES for mc_tcu3 to enable position and alignment attributes in cbfs. Change-Id: I6c39bb02ab641d7e22e20e77a72a577f159549dd Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13123 Tested-by: build bot (Jenkins) Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2016-01-24purism/librem13: Fix select of EC_PURISM_LIBREMMartin Roth
This was misspelled as EC_PURISM_LIBEM, causing the EC to not get included in the build. Change-Id: Iffbfb504926e1b90070c2dbf61c0c44ca8fb46bc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13178 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-22google/oak: Configurate SD card detection pinYidi Lin
BRANCH=none BUG=chrome-os-partner:47609 TEST=remove servo board connection and insert/remove an empty SD card in recovery mode. Change-Id: I89a1cb6914d634f07ff71b9793eb29b711381524 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d21bf091a576574cb9e976447ee2b9a69748d2b6 Original-Change-Id: I2083605c9ad88841885dfaad48dcd27e6fb5161d Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313073 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13099 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22mediatek/mt8173: move rtc_boot() to romstageYidi Lin
BRANCH=none BUG=none TEST=boot to kernel Change-Id: I0630d7c172e97f81abb1722afe028542e9e7f106 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 608c66df0543c76be7e811b06718464776631b55 Original-Change-Id: I03426085121bfa44c99c351d63db28f567d0ee1d Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313969 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13097 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22lib: compile mdelay for romstagePatrick Georgi
Mimicking change I7037308d2, always compile mdelay for romstage. The boards that #included delay.c in the romstage now rely on the linker instead, which is a desirable cleanup. Change-Id: I7e5169ec94e5417536e967194e8eab67381e7c98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13115 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22google/oak: setup usb and configure I2C level shift pinBen Lok
BRANCH=none BUG=none TEST=build pass and verified on rev3 Change-Id: I3849342e59c2b022db723ef0281cdd5153ae27cb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 495e978cd7381bd393099315ac6d60fe4446dd9f Original-Change-Id: I9626d06746e5d0bf6698a9b8e7594c58e7ff213a Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292689 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13096 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/oak: Configure backlight control pinsYH Huang
Since backlight is controlled in depthcharge, we only configure control pins as output pin and set them power-off in the coreboot stage. BRANCH=none BUG=none TEST=Saw DEV screen during boot process. Change-Id: I3ed95e133417194ec8e774f42770bc61d879295f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9628781801943903ba99ba1071aa374c6fc0754 Original-Change-Id: Ifd101f3e08698561d8516d83bc7d502d210e3b66 Original-Signed-off-by: YH Huang <yh.huang@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292686 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13093 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/oak: configure audioKoro Chen
BRANCH=none BUG=none TEST=build and verified pass on oak board Change-Id: I01eb059a3525bbbc5d17335cf43bc01be4355142 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bc2bb9f5b461ec848df8aba07940b895401004f8 Original-Change-Id: I848468cec04a36659fbb4b898dff9368305d72ac Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292683 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13092 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/oak: Disable vboot mock data, now that I2C is functionalLiguo Zhang
BUG=none TEST=emerge-oak coreboot BRANCH=none [pg: split into multiple commits] Change-Id: I7a635c57ba271c8f568bd3334929acdf6a058ce8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2a3d867fd1e547cadc6c947f38082fddc2265d32 Original-Change-Id: I4f3a9b403b949d8ae8e3c393cc9441fb66ea5f1d Original-Signed-off-by: liguo.zhang <liguo.zhang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292667 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13078 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/oak: Enable MMU supportJimmy Huang
BRANCH=none BUG=none TEST=build pass [pg: split into multiple commits] Change-Id: I6e165cfa6a8345de3d8d5461a75d5ed626ece4ef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3ee2a20ec56359e917bb8f4825846c54d4f6276a Original-Change-Id: Iedc81a85569b00524620e9ba128e7d77f17b0405 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292666 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13077 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/oak: Add support for verstageItamar
Add support for verstage [pg: split original commit into multiple commits] Change-Id: I8c9fe02f26bf8fa8381a7502a778bed300684986 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292662 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13052 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/oak: Enable SPI supportLeilk Liu
BUG=none TEST=emerge-oak coreboot BRANCH=none [pg: split into multiple commits] Change-Id: I19f970db40fb8563ef1b782a9606ca3766ef2ac5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 41acc14e9fe54924d20e4e5a2d1519251f0e1c87 Original-Change-Id: I2559be4191da9af523944563729171bd92a86cd0 Original-Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292661 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13076 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22Cyan: Update DPTF parameters for higher temperatureT.H.Lin
TEST=Run DPTF CQ-DEPEND=CL:12729 Original-Reviewed-on: https://chromium-review.googlesource.com/295478 Original-Tested-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ifa58ad72105d377c00df577f0e16ff1148b70119 Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Reviewed-on: https://review.coreboot.org/12747 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22purism/librem13: Add support for Purism Librem 13 mainboardDuncan Laurie
This adds support for booting the Purism Librem 13 mainboard with coreboot, using binaries extracted from the original BIOS and from a Broadwell Chromebook. The following features have been tested on Ubuntu 15.10: - Input: Keyboard and Trackpad - SATA: Internal HDD and M.2 NGFF - Network: WiFi and Ethernet - USB: Bluetooth, Camera, SD Card, Ports (1xUSB2 and 1xUSB3) - Video: Internal panel and HDMI port - Internal speakers and microphone (headphones do not work) - EC handling for battery, AC, lid, special keys These binaries are extracted from the original BIOS: - VGA BIOS - Management Engine - Intel Firmware Descriptor These binaries are extracted from a Broadwell Chromebook BIOS: - MemoryInit reference code binary - SiliconInit reference code binary This was developed and tested on an Librem 13 device. For those who may want to do more development you can use EHCI debug and the right USB port to get coreboot output. Change-Id: Ia72e2d7ddc8ba5eef63819e5677122a5a5c705d8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/13026 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-01-22intel/strago: Set POWER_SOURCE_CONFIG in devicetree.cbKane Chen
SVID config set to SVID_PMIC_CONFIG BUG=none BRANCH=none TEST=build, boot to OS and check the register is set properly Change-Id: If63b8112d4da0347c3a2c4c6d82b12a1f618291c Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/308576 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13117 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/cyan: Add Wifi regulatory methodHannah Williams
WRDD method in wifi.asl returns the regulatory domain code. This value is read from VPD in wifi_regulatory_domain() and saved to global nvs if CONFIG_HAVE_REGULATORY_DOMAIN is enabled. It returns default code if CONFIG_HAVE_REGULATORY_DOMAIN is not enabled. Change-Id: I6e96bdf0fe93ae30a3afdcb63a0f89ce21023704 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13055 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22intel/strago: Add method for Wifi regulatory domainHannah Williams
WRDD method in wifi.asl returns the regulatory domain code. This value is read from VPD in wifi_regulatory_domain() and saved to global nvs if CONFIG_HAVE_REGULATORY_DOMAIN is enabled. It returns default code if CONFIG_HAVE_REGULATORY_DOMAIN is not enabled. Original-Reviewed-on: https://chromium-review.googlesource.com/315131 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I52e0a052d31f36c6dc04e6a0953456350e7d86c3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12746 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22skylake mainboards: Enable CONFIG_VBOOT_EC_SLOW_UPDATEDuncan Laurie
Updating EC+PD takes long enough to update that it is good to show the "critical update" screen when doing an EC/PD update. BUG=chrome-os-partner:49650 BRANCH=glados TEST=Build and boot on chell in normal mode with an EC update payload and ensure that it reboots to enable graphics, shows the "critical update" screen, and then reboots to disable graphics init again. Change-Id: I436b96b95595b68273e594bdcfe2db0789ee26b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 08e45decd066f8f57ad103ff8b76cb7a916afa9e Original-Change-Id: Ie250f4531437e4a0ce14b5aeb0fe564e9461fe4d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/322783 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13075 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22intel/skylake: PL2 override changespchandri
Override the default PL2 values with ones recommended by Intel. BUG=chrome-os-partner:49292 BRANCH=glados TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W MMIO 0x59A0[15] to find PL1 enable/disable = Disable MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W Here PL2 is set to 25W and PL1 is disabled. CQ-DEPEND=CL:321392 Change-Id: I338b1d4879ae1b5f760e3c1d16e379a2baa1c965 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fa6a115227385bef44abfacf58af306c16ed478a Original-Change-Id: I3bfc50256c9bdd522c984b11faf2903d7c44c81f Original-Signed-off-by: pchandri <preetham.chandrian@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322454 Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com> Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/13071 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22google/veyron_*: Add dual-rank 2GB Hynix module to SDRAM configsDavid Hendricks
This is a follow-up to CL:320623 to make veyron DRAM configs uniform (except for Rialto). As discussed in chrome-os-partner:43626, the mr[3] value and ODT are set diffently for Mickey, thus the .inc files for other boards have mr[3] = 1 and ODT disabled. BUG=none BRANCH=veyron TEST=compile tested for veyron Change-Id: I61798cfef779b0a3a510fd354ab53ffc63ca6c95 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3b7cea6331bcec8aba09a204060e093d3dd732cb Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Iacf821645a2dcceaed1c1c42e3e1b1c312b31eab Original-Reviewed-on: https://chromium-review.googlesource.com/321870 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13109 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-01-21chromeos: import Chrome OS fmapsPatrick Georgi
These are generated from depthcharge's board/*/fmap.dts using the dts-to-fmd.sh script. One special case is google/veyron's chromeos.fmd, which is used for a larger set of boards - no problem since the converted fmd was the same for all of them. Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT region ends up at the beginning of flash). This becomes necessary because we're working without a real cbfs master header (exists for transition only), which carved out the space for the offset. Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-21google/veyron_mickey: Update Hynix memory configurationLang Zhang
Update Hynix memory configuration for mickey so that it can boot on Hynix board. BUG=chrome-os-partner:48637 BRANCH=master TEST=Boot on mickey hynix board Change-Id: Ibbf90cf76793005e23a720b97540b268ebf0864d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 071167b667685c26106641e6899984c7bd91e84b Original-Change-Id: Id63d74cac36b9fd84bdb88969291982e14fa7d01 Original-Signed-off-by: Lang Zhang <kingsley_zhang@asus.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320623 Original-Commit-Ready: lang zhang <kingsley_zhang@asus.com> Original-Tested-by: lang zhang <kingsley_zhang@asus.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/13048 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-21google/tidus: initial upstream migrationMatt DeVillier
Migrate google/tidus (Lenovo ThinkCentre Chromebox) from Chromium tree to upstream, using google/guado as a baseline. TEST=built and booted tidus with full functionality Change-Id: I9d7a976345566bee63226d1a44ba7d5ec137a742 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/12801 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-20Kconfig: Remove selects that enable 'choice' symbolsMartin Roth
Selecting Kconfig symbols that were created inside a 'choice' block have no effect. Remove these so people aren't confused by them. Change-Id: I7de9131d8d8afb65f86648afb9728f09cb67e122 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12970 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-19lenovo/t400: Revise onboard IRQ routingNico Huber
All southbridge interrupt pin and routing registers (D*IP and D*IR) are left at their default values (see ICH9 datasheet) and this file just has to reflect them. Change-Id: I1e9732e178bb8422b284d80d9f3d34b72f2e2415 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13040 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-19intel/kunimitsu: Add device properties for Nuvoton codecYong Zhi
This patch added default values for two SAR properies introduced by updated nau8825 codec driver. Also updated sar-threshold to improve button detection accuracy. Bug=chrome-os-partner:49394 BRANCH=glados TEST=Build for kunimitsu. Tested with 4-button headset Change-Id: I4096c60be54819d0ab2bf4b72a1e403f88d96af0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b747e9dffed1c51131f0028879d4c22283c8ec5 Original-Change-Id: I3e222ff58c1483e261acf1cea297164966bf8689 Original-Signed-off-by: Yong Zhi <yong.zhi@intel.com> Original-Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322241 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13014 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19google/chell: Adjust nuvoton 8825 button thresholds, add propertiesBenson Leung
Set "nuvoton,sar-threshold" property to thresholds based on tuning with the Android Wired Headphone Compatibility Kit and Chell EVT. Also set properties nuvoton,sar-compare-time and nuvoton,sar-sampling-time. The values of compare and sampling time align with the ones from this CL: https://chromium-review.googlesource.com/306372 Signed-off-by: Benson Leung <bleung@chromium.org> BUG=chrome-os-partner:49333 BRANCH=none TEST=Run evtest, selecting the input event for sklnau8825adi Using the Nominal headphones from the kit, check that the buttons for "KEY_VOLUMEDOWN", "KEY_VOLUMEUP", "KEY_MEDIA", and code 582 (?) (should be voice search, but evtest doesn't understand) All of these buttons should work properly. Change-Id: I43dc1957f7d95744f41039a306d323806e66c56a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2bb545500afeb5b4fa0d1cd02dbf6453f19901ab Original-Change-Id: I126aae1e5ed1b9e1a2429e8c94fe08b3ba3ca736 Original-Reviewed-on: https://chromium-review.googlesource.com/322243 Original-Commit-Ready: Benson Leung <bleung@chromium.org> Original-Tested-by: Benson Leung <bleung@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13013 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19google/chell: Modify DqsMapMike M Hsieh
Modify Dqs Byte Swizzling for channel 0 to honor chell's memory routing BUG=chrome-os-partner:48986 BRANCH=glados TEST=verified on chell system Signed-off-by: Mike Hsieh <mike.m.hsieh@intel.com> Change-Id: Ic0485526bc1378e329c5eb0eeb57ff67a9501e86 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b60241e63381974655f5df5afcd913e95c17682b Original-Change-Id: I641502e8d303fa59e0f668d581745379e1ef4853 Original-Reviewed-on: https://chromium-review.googlesource.com/321524 Original-Commit-Ready: Duncan Laurie <dlaurie@chromium.org> Original-Tested-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13012 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-19google/chell: Add new memory part for DVT buildDuncan Laurie
After comparing datasheets it appears to have the same geometry and timings as the K4E6E304EE-EGCF part with just a new part number. BUG=chrome-os-partner:49357 BRANCH=glados TEST=build and boot on chell EVT (new part is not used until DVT) Change-Id: Ia1e67080b1d79600e00c3ea8bee088ecafea2ab2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fb1488ca5ff780b5f1f937dbf0d23610c28204b2 Original-Change-Id: I09e1ce1a45a217afc88f422cf7db7924fad6b6f9 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/321956 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13011 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-01-19intel/kunimitsu: Set I2C[4] port voltage to 1.8vNaresh G Solanki
As the audio card needs 1.8V I2C operation. This patch adds entry into devicetree.cb to set I2C port 4 operate at 1.8V. Branch=None Bug=chrome-os-partner:47821 Test=Built & booted kunimitsu board. Verified that I2C port 4 is operating at 1.8V level CQ-DEPEND=CL:*242225, CL:*241206, CL:315167 Change-Id: Ida69b885737aef0cfcf6a6ca21b3650169e614d9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 990df9c1c65e75aae0a1329ead3790e78021b804 Original-Change-Id: Ifbb65e3d83561b52cc18e48b89d146c2f88f289b Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/315168 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13010 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 10:56:27 +0000