| Age | Commit message (Collapse) | Author |
|---|
|
One specific Hynix LPDDR5x DRAM part requires an ABL workaround to
eliminate DRAM-related failures during a FAFT test, but due to the
use of generic/common SPDs, there is no way for the ABL to determine
the DRAM part # itself.
Consequently, we will have coreboot check the DRAM part #, and set/clear
a CMOS bit as appropriate, which the ABL will check in order to apply
(or not apply) the workaround.
The ABL already uses byte 0xD of the extended CMOS ports 72/73 for
memory context related toggles, so we will use a spare bit there.
BUG=b:270499009, b:281614369, b:286338775
BRANCH=skyrim
TEST=run FAFT bios tests on frostflow, markarth, and whiterun without
any failures.
Change-Id: Ibb6e145f6cdba7270e0a322ef414bf1cb09c5eaa
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75698
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
|
|
On nissa, the ISH is running closed source firmware, so the ChromeOS
security requirements specify it must be behind an IOMMU. Add
DmaProperty to the ISH _DSD on joxer.
BUG=b:285477026
TEST=Kernel marks ISH (PCI device 12.0) as untrusted, and changes the
IOMMU group type to "DMA". Also, device still goes to S0i3.
Before:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
0
$ ls /sys/kernel/iommu_groups/5/devices
0000:00:12.0
0000:00:12.7
$ cat /sys/kernel/iommu_groups/5/type
DMA-FQ
After:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
1
$ ls /sys/kernel/iommu_groups/5/devices
0000:00:12.0
0000:00:12.7
$ cat /sys/kernel/iommu_groups/5/type
DMA
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I69b00f0281f4493db157783840d9cdcbb138017f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75758
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add default Intel DPTF.
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: Ib023f6d6d184f6935a6a454250755502a46b707f
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75580
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
+-------------+----------------+------------+---------------------------------+
| PCH USB 2.0 | Connector Type | OC Mapping | Remarks |
+-------------+----------------+------------+---------------------------------+
| 1 | Type-C | OC_0 | Type C port - TCP1 |
| 2 | Type-C | OC_0 | Type C port - TCP0 |
| 3 | Type-C | OC_0 | Type C port - TCP2 |
| 4 | Type-A | OC_3 | USB3.2 Gen2x1 Type-A Port – TAP0|
| 7 | Type-A | OC_3 | TAP1 |
| 8 | Type-A | OC_3 | TAP2 |
| 9 | Type-A | OC_3 | TAP3 |
+-------------+----------------+------------+---------------------------------+
+---------------------+-------------------+------------+---------+
| PCH USB 3.1 Gen 2x1 | Connector Details | OC Mapping | Remarks |
+---------------------+-------------------+------------+---------+
| 1 | Type-A | OC_3 | TAP0 |
| 2 | Type-A | OC_3 | TAP1 |
+---------------------+-------------------+------------+---------+
+------+-------------------+------------+-----------------------------+
| TCPx | Connector Details | OC Mapping | Remarks |
+------+-------------------+------------+-----------------------------+
| 1 | Type C port 0 | OC_0 | To onboard Type-C connector |
| 2 | Type C port 1 | OC_0 | To onboard Type-C connector |
| 3 | Type C port 2 | OC_0 | To onboard Type-C connector |
+------+-------------------+------------+-----------------------------+
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: Icc81f12ec6cc4af37bcc1fcf3164cbfa5612a443
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
When fw_config is unprovisioned, devicetree will disable all probed
devices. However, boot-critical devices such as storage devices need to
be enabled.
As a temporary workaround while adding devicetree support for this,
remove the fw_config probe for storage devices so that all storage
devices are always enabled. On eMMC SKUs, UFS and ISH will be disabled
by the PCI scan anyway. On UFS SKUs, eMMC is not disabled by the PCI
scan, but keeping it enabled should have no functional impact, only a
possible power impact.
BUG=b:285477026
TEST=On joxer eMMC and UFS SKUs, boot to OS and
`suspend_stress_test -c 10`
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I834bd81ce636a6f32d50434cbf07b1d572620492
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75757
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIE_RST_L is attached to a pull down, change the init to NC.
BUG=None
TEST=Boot to OS
Change-Id: I3f7a548a33eb18327139f033d7c0d6a1843f1639
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75700
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update PCIe GPIOs during rom stage to properly initialize the
PCIe devices and allow the NVMe/eMMC to be properly detected.
BUG=b:284213391
TEST=Boot to OS
Change-Id: I24ad6c1addedb414afade2512b6628022d000a47
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move the WP signal to GPP_E12 from the current GPP_E15 to
match the design.
BUG=b:285084125
TEST=WP signal reports as we expect
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I8772173fcdcabf78b0c7d605cd495ebe04b63242
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add support for Micron MT53E2G32D4NQ-046 WT:C LP4x DRAM.
BUG=b:216393391
TEST=build pass
Change-Id: I8c66a18fd94d9a013710fbc6dc7f1533d808392e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Define a CMOS layout for Librem Mini v1/v2 spanning both banks. The
only setting provided is the automatic power-on setting, which is
implemented by the EC. This can now be configured in a firmware image
by replacing cmos.default in CBFS.
Since cmos.default is applied early in bootblock, the EC BRAM interface
must now be configured in bootblock, including opening the LPC I/O
range.
Change-Id: Ib0a4ea02d71f6f99e344484726a629e0552e4941
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74363
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ILI2901 and eKTH7B18 touchscreen for Google Screebo.
BUG=b:278167967
BRANCH=none
TEST=Build and boot to Google Screebo. Verify touchscreen works.
Change-Id: I57d55c5f2621d6fafd53b19d12ecad20271cdbb1
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
|
|
Add support of variant_devtree_update() function to override
devtree settings for variant boards. Also, add CPU power limit
values for mtlrvp baseboard.
BRANCH=None
BUG=None
TEST=Built the changes
Change-Id: I11bc17f25d4880562d016e29f81e37e068bb6757
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Currently if a rails PG fails to assert, the power on sequence
continue after the 20ms timeout. Instead, we should abort
and enter a power down.
BUG=b:285980464
TEST=sequence now aborts and powers down on failure
Change-Id: Id0865e6bdb5db1815ad5509306637308e98c15d7
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: I6f3fa6543a4cec8c2562196105f17fbc7831bab7
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch configures external V1p05/Vnn/VnnSx rails for Joxer
to achieve the better power savings.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
Kit: 646929 - ADL N Platform Design Guide
BUG=b:285477026
TEST=Verified all the UPD values are updated with these configs.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I78d2a885d577f6c1a89ab74c0da7b6544322c0d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Properly shutdown NV12 rail in the off sequence (current
implementation leaves it asserted).
BUG=b:286287940
TEST=NV12 now shuts down on GCOFF entry
Change-Id: I7d338fc4a96f119617aff558413a5a9ac44c27d7
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75533
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add pen detect support on the SOC pen detect GPIO.
BUG=b:286296762
TEST=Verify pen detect works on Myst
Change-Id: I922d643a83c5cd8ea0ab9fe6733f7aa05d935802
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Follow spec[1] to modify WWAN power sequence. The WWAN power sequence
of warm reset is fail. The correct sequence is WWAN_EN should keep high when doing warm reset. Set GPP_D6 to PWROK which is not to do PAD
reset when warm reset.
[1]:
[JDB10] FC ADL-N_WWAN sequence_FM101-GL SDX12 Power Timing
Review_V1.6_20230602.xlsx
BUG=b:285065375
BRANCH=firmware-nissa-15217.B
TEST=1. emerge-nissa coreboot chromeos-bootimage
2. power sequence meets spec.
Change-Id: If59630dbd10e971c91e01f33a657c01d857bc0b9
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75690
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable wifi sar function for yavilla/yavilly/yavijo.
Use the fw_config to separate SAR setting for different wifi card.
BUG=b:286141046
BRANCH=firmware-nissa-15217.B
TEST=build, enabled iwlwifi debug, and check dmesg
Change-Id: I1bd111a734a250df49535a07ef056d5b68fccb33
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add new memory parts
DRAM Part Name ID to assign
Hynix H58G66AK6BX070 3 (0011)
Hynix H9JCNNNFA5MLYR-N6E 4 (0100)
Micron MT62F2G32D8DR-031 WT:B 4 (0100)
BUG=b:279325772
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I2e6a916de08e7c05e95909d2b69bc839d13192d9
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74713
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts.
The memory parts being added are:
1. K4U6E3S4AB-MGCL
2. K4UBE3D4AB-MGCL
BUG=b:285504022
BRANCH=dedede
TEST=build
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I87a4dcdb6196c3ca7bed4b5c1bc654297339c16d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75605
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of adding the new PCI IDs of the XHCI controllers in every new
chip generation to the pci_xhci driver, bind the driver to the internal
PCI devices of the XHCI controllers via the device ops statement in the
chipset devicetree. The PCI device function of the XHCI2 controller in
Mendocino can be either a dummy device or the XHCI controller, so the
device ops are attached to that device in the mainboard devicetree
instead. The Glinda code is right now just a copy of the Mendocino code,
so it'll change in the future, but for consistency the equivalent
changes to those in Mendocino are applied there too.
Since the device ops are now attached to the devices via the static
devicetree entry, also remove both the xhci_pci_driver struct and the
amd_pci_device_ids array from drivers/usb/pci_xhci/pci_xhci.c.
TEST=SSDT entries for the XHCI controllers are still generated on
Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9c455002c6d2aac576fe24eee0c31744b4507bb0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Initialize the SPI Flash in bootblock to ensure that
CONFIG_SPI_FLASH_EXIT_4_BYTE_ADDR_MODE will exit 4-byte addressing mode.
BUG=b:285110121
TEST=boot myst and verify flash operations work correctly
Change-Id: Ia88d2b46884b096b4c558bc86513159ec6d35eb5
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75588
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for Micron MT53E2G32D4NQ-046 WT:C LP4x DRAM.
BUG=b:216393391
TEST=build pass
Change-Id: I0abf1f1105f9a6f16af23b0ed3eb4faeb669eee6
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75716
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Include the GPU ACPI methods for all of Hades baseboard.
BUG=b:285981616
TEST=built for Hades and verify shutdown works
Change-Id: Iec3c4b59a9e7a9d4a902db51d40b60e114521774
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
HW has invert the signal, set it to active high.
BUG=b:285964562
TEST=check crossystem wpsw_cur change as expected.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I54c578e5df5f1b24743cc9506e1e31b0b18bfb25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75628
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Add usb wwan device tree entry. Also set wwan_rst to high due to
HW design active high.
BUG=b:285792436
TEST=check FM101 is detected by Linux kernel.
Bus 002 Device 002: ID 2cb7:01a2 Fibocom Wireless Inc.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I0aa60cb284d4b7f99e16643a92ee58467a355026
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75660
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add fingerprint into device tree. Also set RST to low per HW
requirement.
BUG=b:285799911
TEST=check ectool --name=cros_fp version.
RO version: bloonchipper_v2.0.5938-197506c1
RO cros fwid: CROS_FWID_MISSING
RW version: bloonchipper_v2.0.14348-e5fb0b9
RW cros fwid: bloonchipper_14931.0.0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I09819037b80e55edeb56faef9e27fe0753748efc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75629
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-brya coreboot
BRANCH=firmware-brya-14505.B
Change-Id: Ia083617c58d6b7ebc108e07e29a1c8061580eae5
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: I3795313e784595ac02ee2a38f466bcb9e613a6a4
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75576
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jan Dabros <dabros@google.com>
|
|
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I1644b1d8f49accbb2ea68e236534df80a5151360
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75503
Reviewed-by: Jan Dabros <dabros@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Based on Platform Mapping Document for Ovis (go/ovis_mapping_doc)
state for June 6, 2023 (Rev 0.3)
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: Iae3ca243a245928e8ec3d48877cf578843922fc7
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75502
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
joxer removed SD card from all SKUs, thus disable pcie_rp7.
BUG=b:285477026
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I3486d665ddb1de521ab4e656addb2209055174c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75658
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Board IDs are now filled in as part of the signing process, so we don't
need to set them in coreboot.
BUG=b:240620735
TEST=Build and check VBOOT_GSC_BOARD_ID is set to ZZCR.
Change-Id: I7dda8ad59046a1dd9a28595e037eda86e91c98df
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75641
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new GFX devices for DDI and TCP with custom _PLD to describe the
corresponding ports.
BUG=b:277629750
TEST=emerge-rex coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I193b95e8bd8ae538c4f25fbe772b174ef455d744
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
All the DRAM module for Juniper/Willow can reuse the RAM ID in
offset 0x30 table, so change Juniper/Willow RAM table offset to 0x30
for introducing more DRAM modules.
BUG=b:284423187
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I92740275dcc27061a94b7db7ce095655c0bd7cf5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Uldren does not have PCIE device and should disable PCIE RP7 and
GPP_D7 for preventing PCIe controller not power gate in S0ix.
BUG=b:283735051
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
1. PCIE RP7: cbmem -c | grep 'PCI: 00:1c.6'
[SPEW ] PCI: 00:1c.6: enabled 0
[SPEW ] PCI: 00:1c.6: enabled 0
2. GPP_D7: iotools mmio_read32 0xfd6d0ab0
0x44000300
Change-Id: Ia8a2c0f5530c7a056e8d706c651cac1d49b2091c
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75644
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: Ic555fac846ebf1e9dad81b5847334c03d6804b5b
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a ; Make sure
GOOGLE_OVIS built successfully
Change-Id: I5c8f290cfdcb4d47c0e5e9d72c1e34073b957681
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75385
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The K&D-ILI9882T panel and STA-ILI9882T share all DCS commands and EDID
information except for the manufacturer_name which has no effect to the
function of panel. Let's reuse the STA_ILI9882T struct in this case.
BUG=None
TEST=emerge-staryu coreboot chromeos-bootimage and boot the panel
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I510462a49d273f3d25158b25906d4c514f855cdf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Based on the power sequence of the panel [1], the power on T2 sequence
VSP to VSN should be larger than 1ms, and the power off T2 sequence VSP
to VSN should be larger than 0ms. We modify the power sequence to meet
the datasheet requirement.
[1] B5 TV110C9M-LL0 Product Specification Rev.P0
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I4ccb5be04062a0516f84a054ff3f40afbf5279be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Touchscreen may either use I2C1 or SPI0.
FW_CONFIG.TOUCHSCREEN is set to determine which is used.
This CL adds a probe to enable I2C1.
BUG=b:278783755
TEST=Tested on rex, confimed i2c1 is disabled when
TOUCHSCREEN != TOUCHSCREEN_I2C
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I0bee176298fddd2aee35cf084db037a3ce7672f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Follow 57263_FP8_MBDG_rev_0_92 Table.57 to update the alias. We
can match the schematic for now.
BUG=b:285793461
TEST=USB still works.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Id1058279fe5b0e3131608a0b9bbd708dbbde7e87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add Makefile.inc to include four LPDDR5x SPDs for the following
parts for Joxer:
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 3 (0011)
H58G56BK7BX068 4 (0100)
MT62F1G32D2DS-026 WT:B 4 (0100)
K3KL8L80CM-MGCT 4 (0100)
BUG=b:236576115
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ibdc89c882581cfe4e5978faf4c6f70d653e0813d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75610
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:278783755
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I2a6de778c7ab30a9946e100cb70c092ba98496e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74944
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Ensure USB-C ports' _PLD group numbers appear in order.
get_usb_port_references in src/ec/google/chromeec/ec_acpi.c uses group
token to match with the Type-C port number.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
BRANCH=firmware-brya-14505.B
Change-Id: I5c0395d33ee47ab1c7d45f33d6afb063b8263836
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75572
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Ensure USB-C ports' _PLD group numbers appear in order.
get_usb_port_references in src/ec/google/chromeec/ec_acpi.c uses group
token to match with the Type-C port number.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
BRANCH=firmware-brya-14505.B
Change-Id: I51ff0991565d60807c100b33fb66ab10cc48b8e1
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Ensure USB-C ports' _PLD group numbers appear in order.
get_usb_port_references in src/ec/google/chromeec/ec_acpi.c uses group
token to match with the Type-C port number.
BUG=b:216490477
TEST=build coreboot and system boot into OS.
BRANCH=firmware-brya-14505.B
Change-Id: Ib564ffe272e73f46ec6608420dc431c8b017fb65
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Select SOC_INTEL_RAPTORLAKE for kuldax so that it will use the RPL
FSP headers for kuldax.
BUG=b:285406822
BRANCH=firmware-brya-14505.B
TEST="FW_NAME=kuldax emerge-brask
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage"
Cq-Depend: chromium:4583807, chrome-internal:6003096
Change-Id: Icbf8b26bc2bfee2559cce236bde80a99f8bff859
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75599
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:285406822
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Change-Id: I9ae58d704cba8124c6cb9865431aff84c9d154f7
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75600
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add the phoenix usb config struct for Myst since the FSP has been
updated to accept the config from coreboot and the default values
do not work.
BUG=None
TEST=Boot to OS on Myst, verify devices are seen with lsusb
Change-Id: I329aba80f3003a3a5f343b8dcc3efa8502b98e24
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Enable ISH based on FW_CONFIG obtained from EC CBI. This is useful in
case device is a tablet and motion sensors are handled by ISH instead
of EC.
BUG=b:280329972,b:283023296
TEST= Set bit 21 of FW_CONFIG with CBI
Boot rex board
Check that ISH is enabled and loaded
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ibe0e1b8ce2c9b08ac6b1e6fef9bd19afc9b4f59f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75039
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix for the "Onboard Keyboard and Type-C ports are not working after
resuming from powerd_dbus_suspend" issue. This issue was caused since
FSP 3165 FSP was fixed and started skipping GpioConfigureIoStandbyState
programming when GpioOverride UPD is enabled.
This patch moves the IO Standby State programming that FSP was doing to
coreboot.
BUG=b:284264580
TEST=Boot to OS, compare gpio pins, verify keyboard / Type-C
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: If96c1e71fdde784a55fe079875915ffa5a4f548a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75555
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add devicetree config for ALC1019_ALC5682I_I2S
BUG=b:278169268
TEST=emerge-rex coreboot and verified on screebo
Change-Id: I2814cc76aff43daf0353cfef41592591bbe3d213
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
On Myst, the FSP is shutting down the PCIe lanes that the SSD is
on. Enable hotplug to force the FSP to keep the lanes active.
BUG=b:284213391
TEST=Boot to OS
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Iaf0aca329f05f15a3ce9edfa6a0e782c2edccabe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Enable s0ix on Myst.
BUG=b:277215113
TEST=builds
Change-Id: I3cabc2c3ba75f4490da18b861ef2b82ce240860d
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74279
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel/MTLRVP is built with Intel Meteor Lake-U SoC, so select it.
Currently, there is no functional difference, but in the future FSP
UPD parameters can be overridden properly.
BUG=b:276697173
TEST=Able to build and boot intel/mtlrvp.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8b1dec47ef9d12ac50317b86c4f0bc5fbe4e4dc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75607
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Google/Rex is built with Intel Meteor Lake-U SoC, so select it.
Currently, there is no functional difference, but in the future FSP
UPD parameters can be overridden properly.
BUG=b:276697173
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4c233e0a8ce58998dc1a0379662e386f9b3d0073
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75612
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Create the karis variant of the rex0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:285195072
TEST=util/abuild/abuild -p none -t google/rex -x -a
make sure the build includes GOOGLE_KARIS
Change-Id: I16d8b43390401789b87a6233238e37f32a17b46b
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Generate RAM ID for Samsung K4UCE3Q4AB-MGCL
DRAM Part Name ID to assign
K4UCE3Q4AB-MGCL 3 (0011)
BUG=b:281950933
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I75818b8a34d010fc0efe90c7625162e40e3b0dca
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Generate RAM ID for Samsung K4UCE3Q4AB-MGCL
DRAM Part Name ID to assign
K4UCE3Q4AB-MGCL 3 (0011)
BUG=b:281943392
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I79b29b1195468272c7f64a0eeb15d032eff8c1d3
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
The ramtop entry has to be 10 bytes long, and it was incorrectly set
to 10 bits, instead of 10 bytes. Change this to 80.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I506f9d98a389dd859038fd270c5e344b65f514f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75420
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'SataPortsEnable'.
Change-Id: I0df35125360eb42a03d5445011d72842cb2b8d7e
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75553
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
This patch adds FW_CONFIG to accommodate different Screebo BOM
components across various SKUs.
1. DB_CONFIG for DB_TPEC/DB_TBT/DB_UNKOWN
2. AUDIO for ALC1019_ALC5682I_I2S/AUDIO_UNKNOWN
BUG=b:278169268
TEST=build pass
Change-Id: I928aae61d4936509a7b68f4041c0cd72f298e83d
Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Follow the eKTH7B18U_Product_Spec_V1.1 to add the device.
BUG=b:284381267
TEST=Check touch screen can detect in coreboot.
[INFO ] \_SB.I2C1.H010: ELAN Touchscreen at I2C: 02:10
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I4bd521410953892a477020a872de0d882001b178
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Follow the data sheet SA577C-12C0, Rev. 1.1 to add the device.
BUG=b:284381266
TEST=check touch pad can detect in coreboot.
[INFO ] \_SB.I2C0.D015: ELAN Touchpad at I2C: 01:15
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I0eb0ee1e6cb9c15bfe3964af6ce2ed02eee370a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Follow the schematic_0502 to add the audio codec and amp.
BUG=b:270109435
TEST=Check device can detect in coreboot.
[INFO ] \_SB.I2C3.RT58: Realtek RT5682 at I2C: 04:1a
[INFO ] \_SB.I2C3.D029: Realtek SPK AMP R at I2C: 04:29
[INFO ] \_SB.I2C3.D02A: Realtek SPK AMP L at I2C: 04:2a
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Icfec8d99be8fde986c5516e0c4cd50dae1edfa98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75477
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are only SSD connected to SATA ports on this mainboard. To prevent
misbehavior, set the correct hard drive type for enabled SATA ports.
BUG=none
TEST=Boot into OS and check the stability of the SSD
Change-Id: I2c2b0548865e87859a1d742295e09a731bfb3f76
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
Due to mainboard restrictions a SATA link at Gen 3 can cause issues as
the margin is not big enough. Limit SATA speed to Gen 2 to achieve a
more robust SATA connection.
Change-Id: Ifdea4542836b9c75b5507324fbb06b9566a6fe1d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75365
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on the power sequence of the panel [1] and PMIC datasheet [2],
the power on T2 sequence VSP to VSN should be large than 1ms, but it's
-159us now, and the power off T2 sequence VSP to VSN should be large
than 0ms, but it's less than 0 now. Let's modify the power sequence
to meet the datasheet requirement.
[1] HX83102-J02_Datasheet_v03.pdf
[2] TPS65132-Single-Inductor-Dual-Output-Power-Supply.pdf
BUG=b:282902297
TEST=power sequence T2 pass
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Ib1625c6a211f849071393f69eaf5c649a8e7f72e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75298
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DPTF parameters were verified by the thermal team.
BUG=b:282598257
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I1f38ef52d3906960f8b692595fcc3b39bc000243
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Enabling MIPI UCAM for screebo project
BUG=b:277883010
TEST=none
Signed-off-by: jason.z.chen <jason.z.chen@intel.corp-partner.google.com>
Change-Id: Id06e5c162d911a4bd78190757c25e7f760160a8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75157
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Set tcc_offset value to 20 in devicetree for Thermal Control Circuit
(TCC) activation feature for proto phase.
BUG=b:282865187
BRANCH=None
TEST=Build FW and test on Screebo board
Change-Id: I3a929aa20a700376d2a0a150911fed34e67f78eb
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75360
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Incorrect filename "MakeFile.inc" cause gpio.c can not be complied.
Rename to "Makefile.inc" and confirm gpio.c can load correctly.
BUG=b:281620454
BRANCH=dedede
TEST=build and confirm gpio.c can be loaded
Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com>
Change-Id: I39947c66de04695e5242ab1affc328894f34f9f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75520
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move I2S config from common to board.
BUG=none
TEST=Build google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I51ca902e9b0077d5d5cc9c3507d26301a0f61bc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75513
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable drivers for SoundWire codecs and define the topology in
the devicetree for the rex0 variant with the SoundWire daughter
board connected.
+------------------+ +--------------------+
| | | Headphone Codec |
| Intel Meteor Lake| +--->|Cirrus Logic CS42L42|
| SoundWire | | | ID 0 |
| Controller | | +--------------------+
| | |
| Link 0 +----+ +-------------------+
| | | Left Speaker Amp |
| Link 1 | +--->| Maxim MAX98363 |
| | | | ID 0 |
| Link 2 +----| +-------------------+
| | |
| Link 3 | | +-------------------+
| | | | Right Speaker Amp |
+------------------+ +--->| Maxim MAX98363 |
| ID 1 |
+-------------------+
This was tested by booting the firmware and dumping the SSDT table
to ensure that all SoundWire ACPI devices are created as expected with
the properties that are defined in coreboot under \_SB.PCI0:
HDAS - Intel Meteor Lake HDA PCI device
HDAS.SNDW - Intel Meteor Lake SoundWire Controller
HDAS.SNDW.SW00 - Cirrus Logic CS42L42 - Headphone Codec
HDAS.SNDW.SW20 - Maxim MAX98363 - Left Speaker Amp
HDAS.SNDW.SW21 - Maxim MAX98363 - Right Speaker Amp
BUG=b:269497731
TEST=Verified SSDT for SNDW in the OS. Playback and recording are also
validated on google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I3e11dc642ff686ba7da23ed76332f7f10e60fade
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73280
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The FBVDD_PWR_EN signal should be inverted in its control level
on Agah v.s. Hades. The original change covered the Hades
implementation, but needs to be updated to invert for Agah. This
change can be removed once we drop support for Agah.
BUG=b:280467267
TEST=built for Hades and Agah
Change-Id: I7f90c03b8d9b859004e5c124bf0a1f7b59921c3d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75530
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fine tune eMMC DLL settings based on Uldren board.
BUG=b:280120229
TEST=executed 2500 cycles of cold boot successfully on all eMMC sku.
Change-Id: I82a55a1fe17aa910eb02464df463603dcbbbef05
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75459
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI DmaProperty for WLAN device. `is_untrusted` is eventually
ended up by adding DMA property _DSD which is similar to what
`add_acpi_dma_property` does for WWAN drivers, hence it makes sense to
have a unified name across different device drivers.
BUG=b:279676191
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I6d898a939aa0be31a671d2436a81c34f7a1ec030
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75460
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add 'common_config.acp_config' to the device tree, so we have the
correct pin configuration.
BUG=b:225320579
TEST=USE=fwconsole emerge-skyrim ... ; verify 'devbeep' works in
depthcharge console
TEST=Boot into ChromeOS, verify YouTube sound works with internal
speakers and headphone jack
TEST=Boot into ChromeOS, verify microphone with Google Meet
Change-Id: Ie2d79408104273d8a53214b683800fa0663c14d3
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add beeps and blink SATA LED on critical errors.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I45b8b4fda00d58a1ab1d7dfab49d6f841bc0b000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69821
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Incorrect memory part was used in CB:74745 to generate the DRAM Strap
ID. Amend the memory_parts_used.txt and regenerate the DRAM Strap ID.
BUG=b:272746814
TEST=Generate the DRAM Strap ID.
Change-Id: I0668d7e02345610a11f9113d8bbe99a474f33f1a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
BUG=b:283477280
TEST=Able to build and boot google/rex as per Proto 2 schematics
dated 05/16.
+-----------------+------------------------------------+---------------------------+--------+
| GPIO | In Proto 1 | In Proto 2 | Impact |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_C01 | SOC_TCHSCR_RST_L | SOC_TCHSCR_RST_R_L | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_D19 | NC | EC_SOC_REC_SWITCH_ODL | Y |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_E04 | HPS_INT_L | SOC_PEN_DETECT | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_E17 | EN_HPS_PWR | EN_PP3300_SPARE_X | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_F13 | GSPI1_SOC_MISO | GSPI1_SOC_MISO_R | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_F21 | GPIO_F21_SPI_CS_L | SPI_SOC_CS_UWB_L_STRAP | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_H00 | GPIO_H00_SPI_CLK_R | SPI_SOC_CLK_UWB_STRAP_R | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_H01 | GPIO_H01_SPI_MOSI_R | SPI_SOC_DO_UWB_DI_STRAP_R | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_H02 | GPIO_H02_SPI_MISO | SPI_SOC_DI_UWB_DO_STRAP | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_S00 | UNNAMED_8_METEORLAKEU_I137_GPPS00 | SDW_HP_CLK_WLAN_PCM_CLK | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_S01 | UNNAMED_8_METEORLAKEU_I137_GPPS01 | SDW_HP_DATA_WLAN_PCM_SYNC | N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_S02 | UNNAMED_8_METEORLAKEU_I137_GPPS02 | DMIC_SOC_CLK0_WLAN_PCM_OUT| N |
+-----------------+------------------------------------+---------------------------+--------+
| GPP_S03 | UNNAMED_8_METEORLAKEU_I137_GPPS03 | DMIC_SOC_DATA0_WLAN_PCM_IN| N |
+-----------------+------------------------------------+---------------------------+--------+
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4a8c43b0f845d3446188b7c926e482f91e5b45aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75407
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The IBM SBP1 is an evaluation platform.
It's utilising:
- 4 SPR sockets, having 16 DIMMs each
- 240C/480T at maximum
- 32x CPU PCIe slots
- 2x M.2 PCH PCIe slots
- Dual 200Gbit/s NIC
- SPI TPM
It has an AST2600 BMC for remote management.
It doesn't have:
- External facing USB ports
- Video outputs
- Audio codec
Test:
The board boots to Linux 5.15 with all 480 cores available.
All PCIe devices are working and no errors in ACPI.
All 64 memory DIMMS are working and M.2 devices can be used.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: Ie21c744224e8d9e5232d63b8366d2981c9575d70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73392
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds two new chromeos_*.fmd files for release and debug FSP
builds targeting rex_ec_ish.
`rex_ec_ish` variant would pack ISH firmware into the CSE boot partition
hence, the blob size is expected to increase. Creates separate flash map
layout to ensure ISH work is not impacting on the regular `rex0` project
SPI flash usage.
BUG=b:284254353
TEST=Able to build google/rex_ish_ec board and boot on target hardware.
Change-Id: Ife4663d3ccf80a928646eadaac4c9ab49ad29055
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75471
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates a new variant to support the ISH enablement using
Rex platform.The idea here is to leverage the `rex0` code as much as
possible and add specific support for ISH enablement as per the hardware
schematic differences.
BUG=b:284254353
TEST=Able to build google/rex_ish_ec board and boot on target hardware.
Change-Id: I625fd0b31aed998f4e8f2d139827bc212ee8a90b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75470
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add support of variant_devtree_update() function to override
devtree settings for variant boards. Also, add CPU power limit
values for rex baseboard.
BRANCH=None
BUG=b:270664854
TEST=Built and verified power limit values as below log message
for 15W SKU on Rex board.
Overriding power limits PL1 (mW) (10000, 15000) PL2 (mW)
(57000, 57000) PL4 (W) (114)
Change-Id: If46445157358e3e0f227e26a35b4303fc9189a4b
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Restrict memory speed to 6400 MTS as per board design.
BUG=b:282164577
TEST=Verified the settings on google/rex using debug FSP logs.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I3dec383c7c585b80a73089f3403011c5cda61f65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use verbs enabling jack detect if the EC firmware has been updated
with fixed jack detection.
Test: Build Librem 14 and boot with latest EC, test headset jack
detection.
Change-Id: I57a27b1d51e4f6c7c712bcb2823d21692b9c5ce6
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74364
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Based on the schematic and vendor ASL code, PCI interrupt lines ABC of
the Ricoh R5C847 PC Card/Media Card/FireWire controller are routed DBC.
From lspci and the schematic this chip is PCI device 1. The original
config copied from the T400 was routed ABCD->BCDA, causing Linux to
issue an "irq 18: nobody cared" message when inserting an SD card.
This is fixed by this patch and the SD card now works properly.
Change-Id: Iede1de72d5369f1aebbac170792733739add3431
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75411
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
"extern" is automatically implied with function declaration.
Change-Id: Ic40218acab5a009621b6882faacfcac800aaf0b9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71890
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Use fw_config to probe lte.
BUG=b:283199751
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I5596f3536b0a21453f89e67615acabbbf6a8409b
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75337
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use fw_config to probe touchpad.
BUG=b:283199751
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ib20abac74683c670c174821b821ede461dbb0163
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Enable touchpad for Google Screebo.
BUG=b:278160238
BRANCH=none
TEST=Build and boot to Google Screebo. Verify touchpad works.
Change-Id: Ib83e5ef5ca497592f5a26aa1e85d793d06d9dd7f
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75412
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Commit f99d6700 ("mb/google/skyrim/var/winterhold: Fix USB port ACPI
generation") fixed the USB-A ports being double-nested, but neglected
to move the chip driver registers up into the correct scope. While the
generated ACPI is still correct, fix the register scope anyway to
avoid confusion.
BUG=b:283778468
BRANCH=skyrim
TEST=build/boot winterhold, dump ACPI, verify unchanged
Change-Id: Ia9982fed0fe2093d787ee9506ac5bbadd6cc03f9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75389
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Commit d81ee3f1 ("mb/google/skyrim/var/markarth: Fix USB port ACPI
generation") fixed the USB-A ports being double-nested, but neglected
to move the chip driver registers up into the correct scope. While the
generated ACPI is still correct, fix the register scope anyway to
avoid confusion.
BUG=b:283778468
BRANCH=skyrim
TEST=build/boot markarth, dump ACPI, verify unchanged
Change-Id: I5c1cd23c49b512f55e9e13b2164d30dfb7fb682d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75388
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Commit a539893c ("mb/google/skyrim/var/frostflow: Fix USB port ACPI
generation") fixed the USB-A ports being double-nested, but neglected
to move the chip driver registers up into the correct scope. While the
generated ACPI is still correct, fix the register scope anyway to
avoid confusion.
BUG=b:283778468
BRANCH=skyrim
TEST=build/boot frostflow, dump ACPI, verify unchanged
Change-Id: I3912fe1b7d3f2a07cb379928cd4f5d87100d3284
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75387
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch overrides `SaGv` FSP-M UPD to enable SaGv feature to be
able to train memory (DIMM) at different frequencies.
On all latest Intel based platforms SaGv is expected to be enabled
to support dynamic switching of memory operating frequency.
BUG=b:267879107
TEST=Able to verify SaGv is enabled with 3 work point (0, 1 and 2)
and MRC retraining takes around ~20ms extra compared to SaGv being
disabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic680bfeab4dd285c0d3916ba5e917cc12bae3284
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73534
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SKU1A C0 has no redriver, so enable SBU muxing in the SoC.
BUG=b:283044004
BRANCH=none
TEST=Voltages are correct on the C0 and C1 AUX bias pins
Change-Id: I18b4ade2c60c270855fb2e733a9201539e08d8ba
Signed-off-by: mike <mike5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Enabling BT for screebo project
BUG=b:278169273
TEST=Check whether BT can connect to Bluetooth device
Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com>
Change-Id: I0ecd62abfbe751e1036948b1490844e7e63d7f0d
Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75352
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
