summaryrefslogtreecommitdiff
path: root/src/mainboard/system76/gaze15
AgeCommit message (Collapse)Author
2022-11-24mb/system76: Reset Realtek codec before configuringTim Crawford
Perform a codec reset before configuring to avoid potential issues like oryp5 had before 86f410479ca9 ("mb/system76/oryp5: Reset HDA before configuring"). Inspecting proprietary firmware for multiple boards shows that this is always done as well. Change-Id: I64c1fd23f708f77a81fad0bc889f42d4df3f6e61 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66918 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-10-11mb/system76: Set SMBIOS wakeup type to power switchTim Crawford
Windows hardware tests require this field not be "Reserved". The System76 EC firmware does not report the wake type, so it is not possible to know if the system was powered on from the power switch or Wake-on-LAN. In the case WoL is used, this will report the wrong value. Change-Id: I4653c6bce2a5f0a88281fc810df5646e44f90674 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-08-02mb/system76: Change touchpad detection methodTim Crawford
Use the new "detect" method instead of "probed". Fixes an uncommon issue where i2c-hid fails to initialize the device on Linux. Tested on: gaze15, gaze16-3060, lemp10, oryp8 Tested: - Linux: Touchpad works across 50 reboots - Windows: Touchpad is still detected as an I2C HID device - Windows: Extra I2C HID devices are not shown in Device Manager Change-Id: I6a899c64a6d77b65a2ae57ab8df81cd84b568184 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-23soc/intel/cannonlake: Set MAX_CPUS based on the SoC and PCHFelix Singer
Set the default value for MAX_CPUS in the SoC config and drop it from the mainboards where it is set to those values. Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-16mb/system76: Correct HID names for touchpad devicesTim Crawford
Use correct HID names instead of the CID names for the touchpad devices. Drop the now unneeded UID for the gaze15 TP devices. Tested on a gaze15 with a Synaptics device. Windows does not crash on boot and the touchpad is still detected as an I2C HID device. Change-Id: I5b6ab1a23ce667754d0c5757062385a721c5113f Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-16ec/system76/ec: Provide charging thresholds by defaultTim Crawford
Battery charging thresholds are a firmware implementation and not dependent on any hardware. It is expected that all boards using System76 EC firmware will select this option, so enable it by default. Leave it disabled on clevo/cml-u, which didn't have it selected. Change-Id: Id99d36eaf055a76b9e1eb732174017651de299a5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-02mb/system76: Configure I2C HID IRQs as level triggeredTim Crawford
Per Microsoft's spec for HID over I2C [1], interrupts must be level triggered. Switch GPIOs and the devicetree config to conform to this. Touchpad and multitouch gestures were already working, so no behavior changes are observed in normal use. [1]: http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx Change-Id: I485e616ae00e10bc3620ff3fa1fc1e903653c5cc Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-21mb/system76/*: Enable measured bootTim Crawford
Tested by checking PCR-2 data is recorded in cbmem log. Change-Id: I70cb9a93de44e75f3a3ed24979c243fccea1213d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-21mb/system76/gaze15: Set _UID for touchpad devicesTim Crawford
The _UID must be unique as these devices use the same _HID. Fixes BSOD when booting Windows 10. Change-Id: I67fda892a496dc9e5a6fa5e133ff0b35cde8fce7 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-23mb/system76/*: Enable dGPU temp/fan reportingTim Crawford
Select the EC option on boards with dGPUs to report GPU temperature and fan data. Tested on system76/oryp6. The GPU fan speed is reported in sensors when the system is under load. system76_acpi-acpi-0 Adapter: ACPI interface CPU fan: 1985 RPM GPU fan: 2348 RPM CPU temp: +68.0°C GPU temp: +0.0°C Change-Id: Ieb45dc277c7eb11be1c50b9a9e3e20e3a88578b7 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-23mb/system76/*: Disable IME by CMOS optionTim Crawford
Add CMOS option to set IME mode. Default to "Disable" for CNL and TGL-H, and "Enable" for TGL-U. Not set for KBL, which uses ME_CLEANER. The HECI device must be enabled in devicetree for switching modes to function correctly. Change-Id: I3163dcb0a4af020c2cf6f94f2bb26380f17c253e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-04mb/system76/*: Enable HECI deviceTim Crawford
The HECI device needs to be enabled to send the commands to have the CSME change between Soft Temporary Disable mode and Normal mode. Change-Id: I668507e3b522137bcc827aa615dab1fccd1709a0 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-02mb/system76/gaze15: Add Gazelle 14 as a variantTim Crawford
Change-Id: Ib455951d1d26ddfa010d4eb579905235bd1385a9 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/gaze15: Convert to variant setupTim Crawford
Change-Id: I6d8a97d71ff3b4408f5e11230ed3ff00357f7123 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/*: CMOS: Drop power_on_after_fail optionTim Crawford
Our boards do not boot if power_on_after_fail=Disable. Drop the option and use the default of powering on. Change-Id: Ia1857e52f838337048f79f8ca5c12d669cae321a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-27mb/system76/gaze15: Disable OC supportTim Crawford
Clevo indicated that DIMMs running at 2933 MHz are not supported on a number of processors used for this model. Change-Id: Iadf611a64de664c783696e51cfe858ca95903936 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-17mb/system76/gaze15: Correct CMOS type for debug_levelTim Crawford
When the century byte was reserved, the debug_level was accidentally converted from an enum to a hidden value. Change it back to an enum. Fixes: f05bd8830de ("mb/system76/*: cmos.layout: Reserve century byte") Change-Id: Id88a7aed7b2fc793fd003db5b45f3f201b1a7630 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-09-10cannonlake mainboards: Set PMC as hidden in devicetreeTim Wawrzynczak
FSP-S hides the PMC from the PCI bus when it runs, but there are still initialization steps coreboot programs for the PMC. Therefore, change all of the cannonlake mainboards to set the PMC as hidden in the devicetree, which means the device will be skipped during enumeration, but device callbacks are still issued as if the device were enabled. TEST=Ran full patch train on google/dratini, disassembled SSDT and the PEPD device matches what is in pep.asl. Also verified via dmesg that the INT33A1 device is still initialized by the kernel. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib4a20ce9075ce7653388a5d3e281fe774bf89355 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-03src/*: Specify type of `DIMM_MAX` onceAngel Pons
Specify the type of the `DIMM_MAX` Kconfig symbol once. Change-Id: I2e86baaa8bd50c7b82c399fde5dcea05da6b4307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-09-02mb/system76/*: cmos.layout: Reserve century byteTim Crawford
Windows will write to the century byte (0x32), causing the option table checksum to be invalid and reset all options to their default values. Move options and checksum to start after the century byte. Change-Id: Ia395acacda1e251251c880587bbf61d7ee81ba3d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
Since all mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, make it the default by changing its enum value to 0 and remove its configuration from all related devicetrees. If `common_soc_config.chipset_lockdown` is not configured with something else in the devicetree, then `CHIPSET_LOCKDOWN_COREBOOT` is used. Also, add a release note for the upcoming 4.15 release. Change-Id: I369f01d3da2e901e2fb57f2c83bd07380f3946a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-12mb/system76/*: Add CMOS option tableTim Crawford
System76 uses several custom CMOS values downstream. Reduce our diff by providing a generic layout with the defaults: boot_option=Fallback debug_level=Debug power_on_after_fail=Enable Tested on galp3-c, gaze15, oryp5, oryp6. All boards boot multiple times with USE_OPTION_TABLE selected. Change-Id: Ie57b0e5713bba8ad46e1a4123a3ddd43e0eea964 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-23mb/system76/gaze15: Leave NC GPIOs unterminatedTim Crawford
Remove the unneeded pull up, as leaving them unterminated disconnects them from internal logic. Also replace use of PAD_CFG_TERM_GPO with PAD_CFG_GPO, as none configure termination. Change-Id: I28549a89a885598ba2d5111a9974356562a03cde Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-22soc/intel/cannonlake: Set DIMM_SPD_SIZE to 512Felix Singer
All related mainboards are setting DIMM_SPD_SIZE to 512. Therefore, default to 512 in the SoC Kconfig and drop it from related mainboard Kconfigs. Change-Id: Idb6a0e42961eeb490afd76b4aa7d940961991733 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52513 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-12mb/*: drop LPC generic range for port 80Michael Niewöhner
Port 80 (actually 0x80-0x8f) is a fixed I/O range and thus does not have to be set up as generic range. Drop the entries from the devicetrees. Change-Id: I8a54d3c35a321a2d57bd846662f7339eff53e5a8 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-03-24mb/system76/gaze15: Add System76 Gazelle 15Tim Crawford
Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both NVMe ports - SATA port - All USB ports - Webcam - Ethernet - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux 20.10 and Windows 10 Not working: - Discrete/Hybrid graphics This requires a new driver to work correctly, which will be added and enabled later. Change-Id: I10667fa26ac7c4b8eb67da11f3e963062bd0db47 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47822 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 16:02:05 +0000