summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/tglrvp/variants
AgeCommit message (Collapse)Author
2022-05-05soc/intel/tigerlake: Add enum for `DdiPortXConfig`Angel Pons
Add an enum for `DdiPortXConfig` devicetree options. Note that setting these options to zero does not disable the corresponding DDI port, but instead indicates that no LFP (Local Flat Panel, i.e. internal LCD) is connected to it. Change-Id: I9ea10141e51bf29ea44199dcd1b55b63ec771c0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2022-04-07ChromeOS: Add DECLARE_x_CROS_GPIOS()Kyösti Mälkki
Change-Id: I88406fa1b54312616e6717af3d924436dc4ff1a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-06ChromeOS: Promote variant_cros_gpio()Kyösti Mälkki
The only purpose of mainboard_chromeos_acpi_generate() was to pass cros_gpio array for ACPI \\OIPG package generation. Promote variant_cros_gpio() from baseboards to ChromeOS declaration. Change-Id: I5c2ac1dcea35f1f00dea401528404bc6ca0ab53c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-14soc/intel/tgl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4a81fd58df468e2711108a3243bf116e02986316 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-14soc/intel/tigerlake: add devicetree option PcieRpSlotImplementedMichael Niewöhner
Add the UPD PcieRpSlotImplemented as devicetree option. To keep the PI bit set for any slots of already existing boards, add set the option PcieRpSlotImplemented=1 where appropriate. Change-Id: Ia6f685df3c22c74ae764693329a69817bf3cd01d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-23mb: Add space before closing comment block keywordPaul Menzel
Run the command below to fix all occurrences. $ git grep -l 'ramstage\*/' | xargs sed -i 's,ramstage\*/,ramstage */,' Change-Id: Ied155d325846fc0ef3e823e5708c6f74e3d7998f Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-12-23drivers/intel/pmc_mux/conn: Change usb{23}_port_number fields to device pointersReka Norman
Currently, the pmc_mux/conn driver uses integer fields to store the USB-2 and USB-3 port numbers from the SoC's point of view. Specifying these as integers in the devicetree is error-prone, and this information can instead be represented using pointers to the USB-2 and USB-3 devices. The port numbers can then be obtained from the paths of the linked devices, i.e. dev->path.usb.port_id. Modify the driver to store device pointers instead of integer port numbers, and update all devicetrees using the driver. These are the mainboards affected (all are Intel TGL or ADL based): google/brya google/volteer intel/adlrvp intel/shadowmountain intel/tglrvp system76/darp7 system76/galp5 system76/lemp10 Command used to update the devicetrees: git grep -l "usb._port_number" src/mainboard/ | \ xargs sed -i \ -e 's/register "usb2_port_number" = "\(.*\)"/use usb2_port\1 as usb2_port/g' \ -e 's/register "usb3_port_number" = "\(.*\)"/use tcss_usb3_port\1 as usb3_port/g' BUG=b:208502191 TEST=Build test all affected boards. On brya0, boot device and check that the ACPI tables generated with and without the change are the same. Change-Id: I5045b8ea57e8ca6f9ebd7d68a19486736b7e2809 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-12-09soc/intel/tigerlake: Hook up DPTF device to devicetreeFelix Singer
Hook up `Device4Enable` FSP setting to devicetree state and drop its redundant devicetree setting `Device4Enable`. The following mainboards enable the DPTF device in the devicetree despite `Device4Enable` is not being set. * google/deltaur Thus, set it to off to keep the current state unchanged. Change-Id: Ic7636fc4f63d4beab92e742a6882ac55af2565bc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-09soc/intel/tigerlake: Hook up SMBus device to devicetreeFelix Singer
Hook up `SmbusEnable` FSP setting to devicetree state and drop its redundant devicetree setting `SmbusEnable`. The following mainboards enable the SMBus device in the devicetree despite `SmbusEnable` is not being set. * google/deltaur * starlabs/laptop Thus, set it to off to keep the current state unchanged. Change-Id: I0789af20beb147fc1a6a7d046cdcea15cb44ce4c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-11ChromeOS: Replace with or add <types.h>Kyösti Mälkki
It's commented in <types.h> that it shall provide <commonlib/helpers.h>. Fix for ARRAY_SIZE() in bulk, followup works will reduce the number of other includes these files have. Change-Id: I2572aaa2cf4254f0dea6698cba627de12725200f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-09ChromeOS: Fix <vc/google/chromeos/chromeos.h>Kyösti Mälkki
Change-Id: Ibbdd589119bbccd3516737c8ee9f90c4bef17c1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
Since all mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, make it the default by changing its enum value to 0 and remove its configuration from all related devicetrees. If `common_soc_config.chipset_lockdown` is not configured with something else in the devicetree, then `CHIPSET_LOCKDOWN_COREBOOT` is used. Also, add a release note for the upcoming 4.15 release. Change-Id: I369f01d3da2e901e2fb57f2c83bd07380f3946a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-08-16mb/*/{tglrvp,volteer,deltaur}: move cpu_cluster configuration to chipset.cbMAULIK V VAGHELA
For mainboard devicetree, it always have definition for enabling cpu_cluster 0 which is required for all the variants. Since it is SoC related settings, it's better to keep in chipset.cb as a common setting for all the mainboards using the same SoC. BUG=None BRANCH=None TEST=Change has no functional impact on the brya board. Change-Id: I20bf1a87c7a9b343a86053692617c127a1a3250d Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56955 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-16mb/*/{tglrvp,volteer,deltaur}: Remove hardcoding of BSP APIC IDMAULIK V VAGHELA
coreboot always assumes that BSP APIC ID will be 0 and core enumeration logic will look for lapic id from the mainboard. As per Intel 64 and IA-32 Architectures Software Developer’s Manual Volume 3: 8.4.1 BSP and AP Processors, this assumption might not hold true and we may have any other core as BSP. To handle this, we need to remove hardcoding of APIC ID 0 from mainboard. BUG=None BRANCH=None TEST=Check if there is no functional impact on the board. Change-Id: I175ae26f934f08e125bea7cc3195bdb5792c2360 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56954 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-08mb/intel/tglrvp: Update Power Limit2 minimum valueSumeet Pawnikar
Update Power Limit2 (PL2) minimum value to the same as maximum value. DTT does not throttle PL2, so this minimum value change here does not impact any existing behavior on the system. BUG=None BRANCH=None TEST=Build and test on tglrvp system Change-Id: I6bbbfa8e43a241df721b91425294983c1d561f2c Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-15mb/intel/tglrvp: Enable RTD3 for WWANBora Guvendik
Enable the PCIe RTD3 driver for WWAN device attached to PCIe Root Port 4 and provide the reset GPIO / src clk pin. BUG=none TEST=Boot to OS, verify the link is in L2 state during S0ix. Change-Id: I669e02bd02e3af878648a6f3cf4fbb4d06c9857f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2021-03-15mb/intel/tglrvp/variants: Disable non-existing BT PCI interface and add BT flagCliff Huang
Remove the CNVi BT PCI config and add BT flag. There is no PCI host interface in this version of CNVi. TEST: BT is checked using 'lsusb -d 8087:0026' from OS to make sure BT is enumerated. Change-Id: I8de5615235f24e6169bf67dbbadb92e69437bc4e Signed-off-by: Cliff Huang <cliff.huang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50899 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11src: Remove unused <arch/cpu.h>Elyes HAOUAS
Change-Id: I1112aa4635a3cf3ac1c0a0834317983b4e18135a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-25soc/intel/tgl and tgl mb/google,intel: Use the newly added meminit block driverFurquan Shaikh
This change uses the newly added meminit block driver and updates TGL SoC and mainboard code accordingly. TEST=Verified that UPDs are configured correctly with and without this change. Change-Id: I6d58cd6568b7bbe03c4e3011b2301209893e85a9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-21mb/intel/tglrvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I130fd26944169430a84c3609432b1b5283581c99 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49432 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14mb/intel/tglrvp: Enable CNVi Bluetooth for UP4Bora Guvendik
Turn on CNVi Bluetooth for UP4 in devicetree. BUG=none TEST=Boot to OS, check BT enumeration. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I6a3ec7014c41713697e0fcc90e28bc7bbe6aa1e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
This change reorganizes the CNVi device entries in mainboard devicetree/overridetree and SoC chipset tree to make it consistent with how other SoC internal PCI devices are represented i.e. without a chip driver around the SoC controller itself. Before: chip drivers/wifi/generic register "wake" = "..." device pci xx.y on end end After: device pci xx.y on chip drivers/wifi/generic register "wake" = "..." device generic 0 on end end end Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-30tigerlake mainboards: switch to devtree aliases for PMC MUX connectorsTim Wawrzynczak
Now that soc_get_pmc_mux_device() is gone, the PMC MUX connector devices can be hooked up together via devicetree aliases. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib51764da5b3c029f9ac7ac60199a0aedfc7f29b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45878 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-14mb/intel/tglrvp: Enable Pcie WWAN m.2Bora Guvendik
Enables Pcie M.2 support for WWAN and disable M.2 USB. RP4 is already on and PcieRpEnable[3] is enabled. Clock source 2 is already configured. Added missing gpio configuration. BUG=none TEST=Boot to OS, check WWAN functionality Change-Id: Ie9b7915062b2ef65d881d478e64322c0b8765614 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45828 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-12mb/intel/tglrvp: Add support of TPM over SPIShaunak Saha
Bug=none Test=emerge build and boot on tglrvp and check that tpm is probed successfully from coreboot. Cq-Depend:chromium-review:1881839 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I4a3aec98f72524e8e2a1834878ef75b9f933ae3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/44698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
2020-10-01mb/intel/tglrvp/variants/tglrvp_up4 - Enable onboard HDMI and type-C ↵Jason Le
displays for TGL-Y RVP - Enable DDC pins for DDI-B - Enable HPD pins for DDI-1/DDI-2 - Update MPHY/USB2 Mapping to match with the TGL-Y RVP schematic BUG: System not able to detect displays attached to onboard micro-HDMI or Type-C connectors TEST: hot-plug/unplug HDMI displays with onboard micro-HDMI connector and USB Type-C connectors to make sure the displays get detected and enabled Change-Id: I08a1b16a8fa45cf0f366661395b9f2aa25c44935 Signed-off-by: Jason Le <jason.v.le@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-28mb/intel/tglrvp: Add DTT support for tglrvpSumeet R Pawnikar
Add DTT (Dynamic Tuning Technology) support for Tiger Lake based rvp board. Set power limits and CPU sensor thresholds for DTT based thermal control. BRANCH=None BUG=None TEST=Build and boot on tglrvp board Change-Id: I0dbee370b8dc9e1e3ae6f1a1101047ac6fd76f53 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-09-23mb/intel/tglrvp: Enable Intel Speed Shift Technology for Tigerlake RVPShreesh Chhabbi
BUG=none TEST=Build for Tigerlake RVP and boot to OS. Test if following sysfs is populated. cat /sys/devices/system/cpu/intel_pstate/ Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Change-Id: Ie3d9691e149a6fbc19c6691896126d04c680fde3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45609 Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/intel/tglrvp: Enable HECI interfaceJamie Ryu
This is to enable Intel ME communication interface HECI1 by devicetree for PAVP with CSE Lite. PAVP feature is enabled with CSE Lite SKU for Chrome and HECI1 interface is required between kernel and CSE Lite. BUG=None TEST=Build and boot tglrvp. Run lspci and check pcie device 00:16.0 Communication controller: Intel Corporation Device a0e0 Change-Id: I23117fa96503942e6a72765dd3fd1cc762e3f705 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-08-21mb/intel/tglrvp: Disable TBT_PCIE3 for UP4John Zhao
Tiger Lake External Design Specification (Document #575683) states UP4 TBT_PCIE3 is not applicable. Disable TC3 for UP4. BUG=None Test=Built UP4 image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Icff8fccf9ac29c315c2a4dd08a3ec8a8efe9c453 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44572 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13mb/intel/tglrvp: Set gpio GPP_H1 for soundcard detectionShaunak Saha
This patch sets the GPP_H1 to PAD_CFG_GPO which is general purpose output with no pullup/down. We need this GPIO for the detection of soundcard in TGL RVP's. BUG=none BRANCH=none TEST=Build and boot tglrvp successfully. From "aplay -l" output check that soundcards are listed properly. Change-Id: Ic0ef33079af7940360c986efacabd6d367aad516 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-12mb/intel/tglrvp: Add interrupt _CRS under CREC scopeJohn Zhao
Interrupt _CRS is missing under CREC scope. TGLRVP U/Y has GPP_A15 assigned to MECC_HPD2 as EC_SYNC_IRQ. Configure this GPP_A15 GPIO as active low and level interruptible for EC sync interrupt configuration. BUG=None TEST=Booted to kernel and verified EC_SYNC_IRQ in the scope of CREC current resource settings. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Idfe4d4e800866805ee8d758028ac7ddf4b259faa Reviewed-on: https://review.coreboot.org/c/coreboot/+/44103 Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10mb/tgl: Enable SaGv for TGL-UP3 RVPShreesh Chhabbi
BUG=none BRANCH=none TEST=Build and boot TGL-UP3 RVP with QS silicon successfully. Change-Id: I5b84457a1455edfe500ce80ba7f7ca6ccce43666 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43276 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
Use tabs instead of eight (sometimes less) spaces. Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-29mb/intel/tglrvp: Update TCSS D3Hot and D3Cold configurationJohn Zhao
It is expected both of TCSS D3Hot and D3Cold are enabled by default. BUG=None TEST=Verified both of TCSS D3Hot and D3Cold configuration on TGLRVP. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Id569d8191f82f12379b57a9c50aec31776220bb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-07-29mb/intel/tglrvp: Add support for USB Type-C connector device propertiesJohn Zhao
This change updates TGLRVP configuration to have USB Type-C connector device properties filled into ACPI SSDT. TEST=Built and booted to kernel on tglrvp boards. Verified the USBC scope under LPCB.EC0.CREC with required connector device properties. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ifd4c59afb3b8a222598fd4ff36d72c4b877bdad2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-28mb/intel/tglrvp: Add PMC.MUX.CONx devices to devicetree for tglrvp_up4John Zhao
Two usb Type-C ports under the actual mux device. Each port has its own ACPI device entry. These nodes are the ones that the USB Type-C port/connector device will refer to in order to configure the mux. TEST=Built image-tglrvp-up4.bin successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I8423ddbb5bc189899a9e19e7da6e2ee7b7fecc18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-14src: Remove unused 'include <stdint.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<' Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/intel/tglrvp: Add EC_HOST_EVENT_USB_MUX for tglrvpJohn Zhao
This change allows EC to change state of host-controlled USB MUX. TEST=Built image and booted to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia7c331157b1b4039e42c373f5b130a66f7594458 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42955 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/intel/tglrvp: Enable s0ix for tglrvp up3 and up4John Zhao
This change enables s0ix for tglrvp up3 and up4 platform. TEST=Built image and booted to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I657bee1d7ee120ae15ccb4a33f9eb2fcf5cca65a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42954 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/intel/tglrvp: Enable CpuReplacementCheckJamie Ryu
Enable CpuReplacementCheck for TGLRVP with a CPU socket. Test=build and verified with tglrvp Change-Id: I75b4a4609c172c341087077228e23c6d31a9e7e1 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-07-09mainboard/intel/tglrvp: Remove unused PrmrrSize chip configSubrata Banik
Refer to commit 7736bfc TEST=Able to build and boot TGLRVP. Change-Id: Ie9a97cee7d7793077167db3a642dcbca45b09427 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43139 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/intel/tglrvp: Add PMC.MUX.CONx devices to devicetree for tglrvp_up3John Zhao
Two usb Type-C ports under the actual mux device. Each port has its own ACPI device entry. These nodes are the ones that the USB Type-C port/connector device will refer to in order to configure the mux. TEST=Verified the scope of PMC.MUX CONx in the SSDT on Tigerlake RVP board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I7210e00cebe16a5fb8417ac23abad98e574e0982 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42953 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/intel/tglrvp: Add support for RT 1308Shaunak Saha
Add support for RT 1308 audio amplifier in TGLRVP. We are using the i2c generic driver here to generate the SSDT file. Datasheet:ALC-1308-CG-version-08. BUG=none BRANCH=none TEST=Build and boot tglrvp successfully. In kernel console use the "aplay -l" command to check soundcard is listed. Change-Id: I41d205a3ab87db85baf49e9e8a582c226ba5832d Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-02mb/intel/tglrvp: Enable TCSS xHCI, PCIe root ports and DMA controllersJohn Zhao
This explicitly enables TCSS xHCI, PCIe root ports and DMA controllers from TGL RVP platform devicetree setting. BUG=:b:146624360 TEST=Built and booted on TGL RVP. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I0111542eef253f469f679cdc4b81812438dff4ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/41386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-26soc/intel/tigerlake: Disable VMDWonkyu Kim
It's already disabled by FSP default but disable VMD by devicetree to remove dependency with FSP default setting. BUG=None Branch=None Test=Build TGLRVP and boot up and check FSP log for checking VMD is disabled. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ief81fe481b94abed9754881cf1f454999fafa52e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41061 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26mb/intel/tglrvp: Enable D3HotEnable and D3ColdEnable for tglrvpJohn Zhao
This explicitly enables both of TCSS D3HotEnable and D3ColdEnable from tglrvp devicetree.cb setting. BUG=:b:146624360 TEST=Built and booted on tglrvp. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3b77fe15bd67e513f193f704030a98241e058437 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-20soc/intel/tigerlake: Move PMC PCI resources under PMC deviceTim Wawrzynczak
Historically in coreboot, the PMC's fixed PCI resources were described by the System Agent (the MMIO resource), and eSPI/LPC (the I/O resource). This patch moves both of those to a new Intel SoC-specific function, soc_pmc_read_resources(). On TGL, this new function takes care of providing the MMIO and I/O resources for the PMC. BUG=b:156388055 TEST=verified on volteer that the resource allocator is aware of and does not touch these two resources: ("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 0 PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff flags c0000100 index 1") Also verify that the MEM resource is described in the coreboot table: ("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved") Verified the memory range is also untouchable from Linux: ("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved") Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06soc/intel/tgl: Synchronize GPIO ASL table with Linux kernelShaunak Saha
Kernel pinctrl driver changed for Tiger Lake and went to old scheme. Kernel patch: https://chromium-review.googlesource.com/c/chromiumos/ third_party/kernel/+/2116670 BUG=b:151683980 BRANCH=none TEST=Build and boot tgl board. In /sys/kernel/debug/pinctrl verify INTC34C5:00 listing all the pins. Cq-Depend:chromium:2116670 Change-Id: I9f1d399ff7380125ad5b935f9590a7d9cc442b04 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39801 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20soc/intel/tigerlake: Update iDisp Link UPD settingsSrinidhi N Kaushik
Remove explicit setting of iDisp Link parameters. These settings are related to configuration for the link between HD-Audio controller and Display unit for purposes of HDMI/DP Audio playback. During PO, observed that without setting these params display part was not binding. With the latest code verified that we dont need to explicitly set these parameters anymore. HDMI/DP audio playback works fine with default settings. BUG=b:151451125 BRANCH:none TEST= build and boot volteer/ripto and verify HDMI/DP audio playback Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jairaj Arava <jairaj.arava@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20mb/tglrvp: Configure intel common configWonkyu Kim
Configure lockdown and i2c speed setting. BUG:b:151161585 BRANCH=none TEST=build and boot tglrvp and check FSP logs to lockdown parameters Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Id7a1e9bd94ff86faa390b5de0518e8b3cb668bff Reviewed-on: https://review.coreboot.org/c/coreboot/+/40116 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-14mb/intel/tglrvp : Enable RP LTRWonkyu Kim
BUG=b:151166040 TEST= build and boot volteer and check LTR and AER value from FSP log Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8ab7667d788563ffcb9287a64254590ef9bea5d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40269 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-10src/mb: Remove unneeded spaces before/after tabsElyes HAOUAS
Change-Id: I02979a0632a7b356985f96c3ba239daba178b4e3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39989 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-06mainboard/intel: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I1ea2eebfdd43610e42b4cf04409ec76c2e8b0042 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40082 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02soc/intel/tigerlake: Reorganize memory initialization supportFurquan Shaikh
This change reorganizes memory initialization code for LPDDR4x on TGL to allow sharing of code when adding support for other memory types. In follow-up changes, support for DDR4 will be added. 1. It adds configuration for memory topology which is currently only MEMORY_DOWN, however DDR4 requires more topologies to be supported. 2. spd_info structure is organized to allow mixed topologies as well. 3. DQ/DQS maps are organized to reflect hardware configuration. TEST=Verified that volteer still boots and memory initialization is successful. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib625f2ab30a6e1362a310d9abb3f2051f85c3013 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-04-01soc/intel/tigerlake: Remove Jasper Lake SoC referencesAamir Bohra
This implementation removes all JSL references from the TGL SoC code. Additionally, mainboard code changes are done to support build. BUG=b:150217037 TEST=build tglrvp and volteer Change-Id: I18853aba8b1e6ff7d37c03e8dae2521719c7c727 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-30tgl boards: Configure retimer Aux orientationBrandon Breitenstein
In order to create a working baseline all ports are being set to have retimers. Setting the TcssAuxOri UPD to 0 in order for the SoC to not misconfigure the ports. Volteer will need some additional changes after this is implemented to account for ports that do not have a retimer. This setting is in the process of being documented in the TGL EDS and we can update once it is fully understood what this setting is changing on the SOC side. BUG=b:145943811 BRANCH=none TEST=Boot to OS and check Type-C port1 Display on Volteer, Connecting Type-c display should work regardless of Type-c cable orientation. Change-Id: I29eb0513299126ad8d1ee11ded2c771f28ad13f3 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39460 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-30mb/tglrvp: Add GPE configurationShaunak Saha
Update the GPE configuration for dw0, dw1 and dw2. BUG=None TEST=build and boot tglrvp Change-Id: I8b406bcbd710e84cec91a8c2d1557902e929f7cc Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39844 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23mb/tglrvp: Update Audio AIC settings for Tiger LakeSrinidhi N Kaushik
Update Audio AIC UPD settings and gpio pad configs for Tiger Lake. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I45935b79f6fa4ad66238eead9258a4f15feec508 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-18mainboard/[g-p]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I426518e8e18de1c8efcfb7ecb0835df3e257dca1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39608 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-16mb/intel/tglrvp: Enable ISH driver and register firmware nameli feng
BRANCH=none BUG=b:145946347 TEST=boot to OS with TGL RVP UP3, then copied ISH firmware to host file system /lib/firmware/intel/tglrvp_ish.bin check "dmesg |grep ish", it shows: ish-loader: ISH firmware intel/tglrvp_ish.bin loaded cros_ec_ishtp: Chrome EC device registered Those means shim loader in coreboot has loaded ISH firmware, and firmware is running successfully. Signed-off-by: Hu, Hebo <hebo.hu@intel.com> Signed-off-by: li feng <li1.feng@intel.com> Change-Id: I1ee8050aef6ec0828f16ef2695b5347278caa820 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39481 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/intel/tglrvp: Enable CNVi in devicetree for Tiger Lake UP3Srinidhi N Kaushik
Enable CNVi in devicetree and add gpio pad configs for CNVi BUG=none BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I71146960e0d53dae87946a0365dac6f224a72391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39464 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/intel/tglrvp: Update GPIO settingWonkyu Kim
Update GPIO reset type from PLTRST to DEEP. DEEP setting is more conservative for S3/S4/S5. Detail information is bug. BUG=b:151305120 TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie7d08560ea2ef3623bbd4734b30c80e707869c7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39476 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-11mb/intel/tglrvp: Enable Hybrid storage modeWonkyu Kim
BUG=b:148604250 BRANCH=none TEST=Build and test booting TGLRVP form NVMe and Optane Check PCIe lane configuration Show all the NVMe devices lspci -d ::0108 Show all the NVMe devices and be really verbose lspci -vvvd ::0108 Print PCIe lane capabilities and configurations for all the NVMe devices. lspci -vvvd ::0108 | grep -e x[124] Print all the PCIe information of the device ae:00.0 lspci -vvvs ae: Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5fc8fa0897ad006de9ebe20115bf3033e1e1b499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-11mb/intel/tglrvp: sync up variant folders with latest up3Wonkyu Kim
During intial UP4 patch, below UP3 patches merged which should be applied for UP4. https://review.coreboot.org/c/coreboot/+/39201 https://review.coreboot.org/c/coreboot/+/39229 Merge these patches to UP4 BUG=none BRANCH=none TEST=Build TGL UP4 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I7b24cb2b0d03309cf67c6c21ddc2031a054f6110 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
2020-03-10mb/intel/tglrvp: add CNVi ASL entry for dynamic SSDT generationSrinidhi N Kaushik
This change uses drivers/intel/wifi chip for CNVi device and adds dynamic SSDT entires for CNVi also export wake gpio for CNVi BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check for SSDT entries for CNVi Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Icdbffa0c29c9e0849a6a99f8592b6f35c0bb3207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39315 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/intel/tglrvp: Add memory config for Tiger Lake UP4Srinidhi N Kaushik
Add LPDDR4 memory configuration for Tiger Lake UP4 platform which includes 1. DQ/DQs Mapping 2. Board id Support 3. SPD indexing BUG=none BRANCH=none TEST= Build TGL UP4 successfully Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ibbd7036919c1a91ef12049d2af657f0a3597b57e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39365 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/intel/tglrvp: Add TGL UP4 RVPWonkyu Kim
Add initial TGL UP4 RVP build enviorment BUG=none BRANCH=none TEST= Build TGL UP4 successfully Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iab7ada0746394539586e7cc159112dc8208fdd7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39363 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/intel/tglrvp: Add pin mux for CameraWonkyu Kim
Add additional pin mux for I2C3, I2C5 for Camera. These pin muxes were done in FSPs, these pin muxes are for bypassing pin muxes in FSPs. BUG=none BRANCH=none TEST=Build with pin mux bypass FSP and boot tigerlake rvp board and check camera Simple test method to check camera: capture image by below commands from OS console >media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]" >media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]" >yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10 $(media-ctl -e "Intel IPU6 CSI2 BE capture") Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9ad0e5ed452d2b2e8c674abe2a647a0a9c59188e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39201 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/intel/tglrvp: Update display ports for RVPWonkyu Kim
Enable DdiPortBHpd and additional pin muxes for DPs. These pin muxes were done in FSPs, these pin muxes are for bypassing pin muxes in FSPs. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Id44cfba696b1a21296278f4de2ad6de8f6bbd63b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39229 Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/intel/tglrvp: Enable Audio AIC with Max98373 & ALC5682 on TGLSrinidhi N Kaushik
Add support for Max98373 speaker amp & ALC5682 headset codec BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I013dbc6246b07a501f9bff80c2bca3594e6cc146 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-02-26mb/intel/tglrvp: add Tiger Lake memory initialization supportSrinidhi N Kaushik
Update memory parameters based on memory type supported by Tiger lake RVP 1. Update dq/dqs mappings 2. Update spd data for Tiger lake LPDDR4 SAMSUNG/MICRON memory 3. Add SPD data bin files for supported memory types 4. Update other FSPM UPDs as part of memory initialization BUG=none BRANCH=none TEST= build tglrvp flash and boot to kernel Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I7248862efd1dcd5a0df0e17d39b44c168caa200e Reviewed-on: https://review.coreboot.org/c/coreboot/+/38998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-02-05mb/intel/tglrvp: pin mux for ISHWonkyu Kim
TGL FSP does pin mux for ISH related to pins by UPD(PchIshSpiEnable, PchIshUartEnable, PchIshI2cEnable, PchIshGpEnable) but as default UPD value is disabled, FSP doesn't do pin mux. So pin mux for ISH in gpio.c. Pin mux for ISH for TGLRVP ISHUART0: GPP_D13, GPP_D14 as NF1 ISHI2C0: GPP_B5, GPP_B6 as NF1 ISHGPIO0-7: GPP_D0~D3, GPP_D17~D18, GPP_E15~E16 as NF1 BUG=none BRANCH=none TEST=Build and boot to OS and check pinctl driver to check pin mux. Check ISHUART0, ISHI2C0, ISHGPIO0-7 native function setting. They should be NF1. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I1a9ba3a713527f5ce962659960418cd0f37dd262 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-29mb/intel/tglrvp: pin mux for image clocksWonkyu Kim
pin mux for IMGCLKOUT_0 and IMGCLKOUT_1 BUG=none BRANCH=none TEST=Build and boot to OS and check pinctl driver to check pin mux for Image clocks pins(GPP_D4, GPP_H20) Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ifb0c2b17dd481ef6c19bdf9ee84f47ef08d7b9a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-28mb/intel/tglrvp: Enable DP ports for TGLRVPWonkyu Kim
TGLRVP uses DdiPort1Hpd and DdiPort1Ddc. So only enable them. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ief6376ba59c77340e272923958b6b5f0a1456d9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38529 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-27mb/intel/tglrvp: Enable MIPI cameraWonkyu Kim
Add MIPI camera ACPI Update GPIO pin mux for camera BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check camera Simple test method to check camera: capture image by below commands from OS console >media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]" >media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]" >yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10 $(media-ctl -e "Intel IPU6 CSI2 BE capture") Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4189e96f68f0e64e0860405e00eeab84564b86be Reviewed-on: https://review.coreboot.org/c/coreboot/+/37863 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25mb/intel/tglrvp: Enable rp11 for optaneWonkyu Kim
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk pins. This is also dependent on pciecontroller3 config to be set as 2x2 instead of 1x4 in fit configuration in IFWI. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board from Optane and check 2 NVMe devices from lspci Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ic81244bebac78102af7ba6308ab64b18c886f839 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-25soc/intel/tigerlake: Fix GPIO communitiesShaunak Saha
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups in coreboot so that they are mapped properly. GPIO comuinities in coreboot should match with the kernel gpio communities also. Kernel reads the ASL file from coreboot. This patch adds the proper community mapping in ASL code to match with kernel code. In gpio_soc_defs.c file we are indexing the groups correctly. In gpio.h file we define all the gpio devices as kernel populates sysfs with separate gpio device for each community. This patch is created based on Intel Tiger Lake Processor PCH Datasheet with Document number:575857 and Chapter number:27. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board. In /sys/kernel/debug/pinctrl verify INTC34C5:0<1-3> listing all the pins for each community. e.g., #cat /sys/kernel/debug/pinctrl/INT34C5:00/pins should list all the community 0 pins. Change-Id: I40c386db060d84c1b7fba9c587f960d6a92f84ba Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-01-24mb/intel/tglrvp: Enable SATAWonkyu Kim
Enable both SATA ports for TGLRVP. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board with SATA memory Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9f35682982a6c06522e58b0bbd7162ff02c37f32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38505 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18mb/intel/tglrvp: Update tglrvp_up3 devicetreeRavi Sarawadi
Update Tigerlake RVP UP3 devicetree to reflect devices used by tglrvp_up3. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Idd0d9efe0ab4e050d2160f7662e4dc40a002672f Reviewed-on: https://review.coreboot.org/c/coreboot/+/37929 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-17mb/tglrvp: update gpio pin mux for NVMeWonkyu Kim
BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board from NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ib4b85db667c27d266d2ed5a4aa4f4dffa3dd527e Reviewed-on: https://review.coreboot.org/c/coreboot/+/38286 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-14mb/intel/tglrvp: Add initial mainboard codeRavi Sarawadi
This is a initial mainboard code aimed to serve as base for further mainboard check-ins. This is a copy patch from icelake_rvp as on commit ID: I64db2460115f5fb35ca197b83440f8ee47470761 Below are the changes done over the copy patch: 1. Rename "Icelake" with "Tigerlake". 2. Replace "icelake_rvp" with "tglrvp". 3. Rename "icl" with "tgl". 4. Remove unwanted SPD file, add empty SPD as placeholder. 5. Replace "soc/intel/icelake" with "soc/intel/tigerlake". 6. Empty romstage_fsp_params.c, to fill it later with SOC specific config. 7. Empty GPIO configuration, to be filled as per board. 8. Change copyright year to 2019. 9. Add board support namely BOARD_INTEL_TGLRVP_UP3 10. Replace icl_u and icl_y variant with tglrvp variant. 11. Remove basebord gpio.c and rely on variant override. 12. Remove HDA verb table and config support. Changes to follow on top of this: 1. Add correct memory parameters, add SPDs. 2. Clean up devicetree as per tigerlake SOC. 3. Add GPIO support. 4. Update chromeos.fmd to make 32MB BIOS region. 5. clean up and make empty devicetree setting TEST=Build tigerlake rvp board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I86ada611de1cf28a1b872eea35cf41c0dc1c57f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 17:18:38 +0000