summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2016-11-20intel sandy/ivy: Improve DIMM replacement detectionKyösti Mälkki
2016-11-20mainboard/google/reef: Update DPTF parameters provided from thermal teamTim Chen
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
2016-11-17google/snappy: Update DPTF settingsWisley Chen
2016-11-17mainboard/google/reef: disable unused devicesJagadish Krishnamoorthy
2016-11-17mainboard/google/reef: set i2c bus timings by rise/fall timesAaron Durbin
2016-11-17google/gru: Move to one CA training patternDerek Basehore
2016-11-17google/gru: Add new CA training patternDerek Basehore
2016-11-17google/oak: Add more DRAM modules supportPH Hsu
2016-11-16mainboard/google/reef: Add proper DMIC endpoints based on DMIC config pinSathyanarayana Nujella
2016-11-16google/eve: Fill out memory ID tableDuncan Laurie
2016-11-15google/link/i915.c: Fix build error when native gfx init enabledIru Cai
2016-11-14google/chell : update DPTF policy settingsSumeet Pawnikar
2016-11-11mainboard/google/snappy: Configure PERST pinWisley Chen
2016-11-11google/snappy: update timing of sdmode togglingWisley Chen
2016-11-11mainboard/google/snappy: Set PL1 override to 12000mWWisley Chen
2016-11-11soc/intel/skylake: move i2c voltage config to own variableAaron Durbin
2016-11-10mainboard/google/reef: Add digitizer device to devicetreeFurquan Shaikh
2016-11-10mainboard/google/reef: Tune digitizer I2C frequency to 400kHzFurquan Shaikh
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
2016-11-10mainboard/google/pyro: Set PL1 override to 12000mWKevin Chiu
2016-11-10google/pyro: Tune i2c frequency to 400 KhzKevin Chiu
2016-11-10google/pyro: update timing of sdmode togglingKevin Chiu
2016-11-10mainboard/google/pyro: Configure PERST pinKevin Chiu
2016-11-10mainboard/google/reef: Add support for RECOVERY_MRC_CACHEFurquan Shaikh
2016-11-09mainboard/google/reef: use common google smbios mainboard versionAaron Durbin
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li
2016-11-07google/lars: Update DPTF settingsSumeet Pawnikar
2016-11-07mainboard/google/reef: update DMIC related pins configurationSathyanarayana Nujella
2016-11-04reef: tune trackpad i2c frequency to 400kHzAaron Durbin
2016-11-04reef: tune tpm i2c frequency to 400kHzAaron Durbin
2016-11-03google/veyron*: change .ddrconfig from 14 to 3ZhengShunQian
2016-11-03google/veyron*: add DDR configs for new samsung DDRZhengShunQian
2016-11-02rockchip/rk3399: display: Do not allocate framebuffer in corebootLin Huang
2016-11-02rockchip/rk3399: sdram: also prepare the index1 configurationLin Huang
2016-11-01google/eve: Add new boardDuncan Laurie
2016-10-28lars/kunimitsu: Add other sensor in _ART for fan controlSumeet Pawnikar
2016-10-28mainboard/google/reef: allow variants to override NHLT OEM stringsAaron Durbin
2016-10-28mainboard/google/reef: update comment for DMIC config usageAaron Durbin
2016-10-27mainboard/google/reef: drop disabling periodic training for micronAaron Durbin
2016-10-27mainboard/google/reef: clarify memory part number detailsAaron Durbin
2016-10-27skylake: Use COMMON_FADTDuncan Laurie
2016-10-26google/reef/variants/pyro: Use WCOM Touchscreen driverFurquan Shaikh
2016-10-25google/oak: Add derivative board HanaYidi Lin
2016-10-25rockchip/rk3399: gru/kevin: drop unused sdram configsLin Huang
2016-10-25rockchip/rk3399: reset system if DDR init failsLin Huang
2016-10-25mainboard/google/reef: Add PowerResource for ELAN touchscreenFurquan Shaikh
2016-10-20mainboard/google/reef: add snappy variantWisley Chen
2016-10-18mainboard/google/reef: Configure PERST pin for reef DVTVaibhav Shankar
2016-10-16mainboard/google/reef: Set PL1 override to 12000mWVenkateswarlu Vinjamuri
2016-10-10google/reef: update timing of sdmode togglingSathyanarayana Nujella
2016-10-08google/oak: Increase the driving strength for 4GB DRAMsPH Hsu
2016-10-08google/gru: Add USB 2.0 PHY tuning for Kevin PHY0 and PHY1William wu
2016-10-07google/reef/variants/pyro: Add support for GPIO output polarityMartin Roth
2016-10-07src/mainboard: Remove whitespace after sizeofElyes HAOUAS
2016-10-07src/mainboard: Remove unnecessary whitespaceElyes HAOUAS
2016-10-07x86/acpi_device: Add support for GPIO output polarityFurquan Shaikh
2016-10-07google/gru: drive WLAN_MODULE_RST# low as early as possibleBrian Norris
2016-10-07google/gru: set W2W_DIFFCS_DLY to 5Lin Huang
2016-10-07google/gru: pass apio number to arm-trust-firmwareLin Huang
2016-10-07google/gru: pass the gpio power supply enable pin to bl31Lin Huang
2016-10-07mainboard/google/reef: add pyro variant.Kevin Chiu
2016-10-06rockchip: rk3399: improve write leveling flowJianqun Xu
2016-10-06google/gru: Shrink RW_ELOG region to 4KBJulius Werner
2016-10-06rockchip: rk3399: improve sdram noc timingLin Huang
2016-10-06rockchip/rk3399: lower kevin board sdram frequency to 800MHzLin Huang
2016-10-06google/veyron_rialto: Add lpddr3-K4E6E304EB-2GB-1CH memory configurationJeffy Chen
2016-10-06rockchip/rk3399: Move big CPU cluster initialization into ramstageJulius Werner
2016-10-04google/gru: Ensure correct pull resistors for special-function pinsJulius Werner
2016-10-04gru: Increase SPI speed to 33MHzSimon Glass
2016-10-04google/gru: Init the PWM pinmux after setting up the PWMDouglas Anderson
2016-10-04src/mainboard: Remove unnecessary semicolonElyes HAOUAS
2016-10-03google/gale: Remove #ifdef of Kconfig bool symbolMartin Roth
2016-10-03google/gale/Kconfig: Change wording of Kconfig optionMartin Roth
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
2016-10-01mainboard/google/reef: Update DPTF policy temp. values for CPUSumeet Pawnikar
2016-10-01mainboard/google/reef: unconditionally set MAINBOARD_FAMILYAaron Durbin
2016-09-30google/reef: Fix default values in KconfigMartin Roth
2016-09-30Kconfig: Prefix hex defaults with 0xMartin Roth
2016-09-30mainboard/google/stout/romstage.c: Use tabs for indentsElyes HAOUAS
2016-09-28google/reef: Mark touchpad and touchscreen as probed devicesDuncan Laurie
2016-09-26mainboards,ec: provide common declaration for mainboard_ec_init()Aaron Durbin
2016-09-26mainboards/google/reef: use chromeec's ASL lid switch implementationAaron Durbin
2016-09-26soc/intel/apollolake: provide power button ACPI deviceAaron Durbin
2016-09-21google/enguarde: Adapt to current treePatrick Georgi
2016-09-21google/enguarde: Upstream Lenovo N21 ChromebookMatt DeVillier
2016-09-21mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
2016-09-21Makefiles: update cbfs types from bare numbers to valuesMartin Roth
2016-09-20src/mainboard/getac - kontron: Add space around operatorsElyes HAOUAS
2016-09-20gru/kevin: Decrease voltage for little cpu 1.5G to 1.15vShunqian Zheng
2016-09-20Veyron: Increase bit-per-pixel to 32Daisuke Nojiri
2016-09-20google/gru: Fix up PWM regulator rangesJulius Werner
2016-09-20Gru: Increase bit-per-pixel to 32Daisuke Nojiri
2016-09-20gru: Add watchdog reset supportJulius Werner
2016-09-19Revert "mainboard/google/reef: Enable cr50 TPM interrupt"Duncan Laurie
2016-09-19mainboard/google/reef: Enable cr50 TPM interruptDuncan Laurie
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
2016-09-19mainboard/google/reef: Configure WLAN as wake sourceVaibhav Shankar
2016-09-15mainboard/reef: add variant support to ASL codeAaron Durbin
2016-09-15google/reef: Remove setting of GPIO_TIER1_SCI enable bitShaunak Saha
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 17:32:36 +0000