summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2021-09-27mb/google/brya/var/kano: Move max98373 amp ACPI info to I2C0David Wu
Move max98373 amp ACPI info to I2C0 according to kano's schematics version KANO_MLB_Proto_0811. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8f7a7938dd407666e0104ba64b22da85216a145f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27mb/google/brya: Correct SSD power sequenceEric Lai
SSD sometimes can't be detected in in warm/cold boot stress. M.2 spec describes SSD_PREST should be sequenced after power enable. BUG=b:199822704 TEST=SSD was always discovered in warm/cold boot stress. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If0a9e36cda4dc91bbccec02f39ccb9b658d24056 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-27mb/google/hatch/moonbuggy: Update DPTF parametersKenneth Chan
Update the DPTF parameters received from the thermal team. BUG=b:188596619 TEST=emerge-ambassador coreboot Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I081963b97ed2dae0f5d026f6443c954b52347a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57919 Reviewed-by: Joe Tessler <jrt@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27mb/google/glados: Clean up dsdt.aslFelix Singer
Move includes using library paths to the top and remove unnecessary comments. Change-Id: Id26d9dfc3822b9120360fc2cb2ced8d67345a659 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-27mb/google/dedede/var/blipper: Generate SPD ID for supported partsZhi Li
Add the relevant memory configuration of beetley to the blipper coreboot code The memory parts being added are: 1. Micron MT53E512M32D1NP-046 WT:B 2. Samsung K4U6E3S4AB-MGCL 3. Hynix H54G46CYRBX267 BUG=b:200000608 TEST=emerge-dedede coreboot Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com> Change-Id: I0b04f64cb007a58ae98f5ed187feb4859a43b1b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57670 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-24mb/google/guybrush: Remove ALS presentationGwendal Grignou
guybrush does not have a light sensor, do not include ACPI0008 ACPI device (Light sensor that will be managed by acpi-als IIO kernel driver). BUG=b:200823325 TEST=Check on Guybrush360 the sensor is not presented. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: Id1dcb3a01ee43f780e4b118d88a0351e4c543f5a Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-09-24mb/google/brya/variants/primus: config dram speed to 3733Casper Chang
This change config the DRAM speed to 3733 for primus. BUG=b:200752480 BRANCH=none TEST=Verified that `dmidecode -t17` shows the correct configured memory speed Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I2f3a9489dddcf102b0ffc71eb9cdab6ad38d1391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/zork: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias for following devices: 1. audio_rt5682 2. xhci0_bt 3. xhci1_bt 4. acp_machine 5. i2c2 Change-Id: I56921ab54716e4d771d9de1a479f191ca5657eba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/guybrush: Configure the level for AMD Firmware binariesKarthikeyan Ramasubramanian
AMD Firmware tool allows configuring the directory table level in which the binaries have to be added. This helps to achieve space and boot time savings. BUG=b:195329409 TEST=Build and boot to OS in Guybrush. Achieve a boot time savings of ~75 ms and space savings of ~600 KB per RW section. Change-Id: Idc212b8c4f8aacfb0132983a8055f1e97af42983 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bao Zheng <fishbaozi@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-24mb/google/brya/var/taeko: Enable SaGv supportJoey Peng
Enable SaGv support for taeko BUG=b:198548214 TEST=FW_NAME=taeko emerge-brya coreboot Flash fw into DUT and can boot successfully Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I580a12ca511d8cde6fee1079e39e6976202da4d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Set vGPIO configurationDavid Wu
Due to the vGPIO is not set correctly, without setting those pins for PEG60, CPU cannot communicate with PCH about the clkreq state. BUG=b:200886824 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I6adf73103ecb02c67d9a199e13d2ead9b8b2276f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Enable EC keyboard backlightDavid Wu
Enable EC keyboard backlight for kano. BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I7f56b92b60cadf72eb02fd8bcb87baf36acc16e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/brya/var/kano: Enable SaGv supportDavid Wu
Enable SaGv support for kano BUG=None TEST=FW_NAME=kano emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ifc537a5137f5e6eb10cd4c160923ea4da1f6b0d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-24mb/google/dedede/var/magolor: Add ssfc codec DA7219 supportTyler Wang
Add DA7219 codec support in maglet. BUG=b:198239769, b:196193562 TEST:emerge coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I52d980ed611b3fbe4892cd3e65e3b35931feaba5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-23soc/amd/common/blocks/include: rename gpio_banks.h to gpio.hFelix Held
This brings the AMD SoC GPIO code in line with the Intel SoC code and removes the not really needed suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie2dbec81dfe503869beb2872b01a7475e2b88b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd: rename program_gpios to gpio_configure_padsFelix Held
Use the same function name as in soc/intel for this functionality. This also brings the function name more in line with the extended version of this function gpio_configure_pads_with_override which additionally supports passing a GPIO override configuration. This might cause some pain for out-of-tree boards, but at some point this should be made more consistent, so I don't see a too strong reason not to do this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I88852e040f79861ce7d190bf2203f9e0ce156690 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23mb/google/brya/variants/gimble: Update DPTF sensorsMark Hsieh
Add two thermal sensors for fan and charger for DPTF based thermal control. BUG=b:199180746 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I1529dd5dff3445dd499ed665386a9b06d67c7028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57833 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23mb/google/brya/variants/gimble: Update audio settingMark Hsieh
Add vmon-slot-no,imon-slot-no and dsm_param_file_name in overridetree.cb BUG=b:197701952 TEST=build and check SSDT Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ie646360c4ebbf25762b374c5bc3ef2017989fb2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57832 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23mb/google: Update comments in mem_parts_used.txt to match new templatesReka Norman
BUG=b:191776301 TEST=None Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Iafcbb3ce33cd2299ff98b54b9200f3e70929fb1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google: Bulk rename mem_list_variant.txt to mem_parts_used.txtReka Norman
The variant creation script creates a placeholder file called mem_parts_used.txt, with the intent that variant owners will populate this file with memory parts as needed. But instead, some partners have been adding the parts in a new file called mem_list_variant.txt and removing the placeholder file. E.g. https://review.coreboot.org/55735. There's nothing wrong with this, but it's confusing to have two different file names which serve the same purpose. Bulk rename all the mem_list_variant.txt files to mem_parts_used.txt. The only time these file names are used is as an argument to the spd_tools part_id_gen script, so no other changes are necessary. BUG=None TEST=Re-run part_id_gen for all variants of brya/volteer/dedede/guybrush/zork. Check that the only change is to the "Generated by" comment in Makefile.inc and dram_id.generated.txt. Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Icdeee78ae5c01e97f66c759c127175b4962d5635 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/volteer: Remove unused mem_parts_used.txt from copano/collisReka Norman
The copano and collis variants have both a mem_parts_used.txt and a mem_list_variant.txt. The mem_parts_used.txt files are empty, so delete them. BUG=None TEST=None Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Ia98aad7238b0173b8d5c048d89637bc297d02283 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/zork: Migrate zork to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all zork variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for dalboz: util/spd_tools/bin/part_id_gen \ PCO \ ddr4 \ src/mainboard/google/zork/variants/dalboz/spd \ src/mainboard/google/zork/variants/dalboz/spd/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/zork -a -x --timeless Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I305a24f9345bab28ff35e317b6e7fd7efba22413 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57772 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-23mb/google/hatch/moonbuggy: copy PCIe configuration from genesisJeff Chase
The moonbuggy pcie topology is the same as genesis so copy from its device tree and gpios in order to enable these devices. BUG=b:199746414 TEST=lspci Change-Id: I4e916a95047b9f955734f164d7578c520478f5af Signed-off-by: Jeff Chase <jnchase@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/brya/var/anahera: Update gpio and devicetreeWisley Chen
Based on latest shcematic to update the device tree and gpio. BUG=b:197850509 TEST=FW_NAME=anahera emerge-brya coreboot Change-Id: I0a999de479c7b2e4776a57e1e56b1568450ec31a Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/guybrush: Migrate guybrush to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all guybrush variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for guybrush: util/spd_tools/bin/part_id_gen \ CZN \ lp4x \ src/mainboard/google/guybrush/variants/guybrush/memory \ src/mainboard/google/guybrush/variants/guybrush/memory/mem_list_variant.txt For dewatt, the Makefile.inc was manually modified to use the new placeholder value. BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/guybrush -a -x --timeless Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I48ca430b80b892d68dad582b1d9937a9edafa5d4 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/dedede: Migrate dedede to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all dedede variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for cret: util/spd_tools/bin/part_id_gen \ JSL \ lp4x \ src/mainboard/google/dedede/variants/cret/memory \ src/mainboard/google/dedede/variants/cret/memory/mem_parts_used.txt For cappy, the Makefile.inc was manually modified to use the new placeholder value. BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/dedede -a -x --timeless Change-Id: I2871ff45d6202520d4466b68a4d5bb283faf2b63 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-23mb/google/dedede: Remove unnecessary fixed IDs from galtic mem_parts_used.txtReka Norman
Currently, trying to regenerate the galtic Makefile.inc and dram_id.generated.txt using part_id_gen fails due to duplicate fixed IDs in the mem_parts_used.txt file. Remove the fixed IDs since they aren't needed. The part IDs assigned are the same either way. Also delete the comments from mem_parts_used.txt, since lp4x/gen_part_id currently doesn't support comments. BUG=b:191776301 Regenerate the Makefile.inc and dram_id.generated.txt using gen_part_id, and check that the part IDs don't changed. Command used: util/spd_tools/lp4x/gen_part_id \ src/soc/intel/jasperlake/spd \ src/mainboard/google/dedede/variants/galtic/memory \ src/mainboard/google/dedede/variants/galtic/memory/mem_parts_used.txt Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Ida83814b2f19b4a56eb9fde5939fa6c7874803c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-23mb/google/volteer: Migrate volteer to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all volteer variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for voema: util/spd_tools/bin/part_id_gen \ TGL \ lp4x \ src/mainboard/google/volteer/variants/voema/memory \ src/mainboard/google/volteer/variants/voema/memory/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/volteer -a -x --timeless Change-Id: Ibd4f42fd421bfa58354b532fe7a67ee59dac5e1d Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/brya: Migrate brya to use SPD files under spd/Reka Norman
SPD files are being moved from the soc and mainboard directories to a centralised spd/ directory. This change migrates all brya variants to use this new location. The contents of the new SPDs are identical, only their file paths have changed. The variant Makefile.inc and dram_id.generated.txt files were generated using the part_id_gen tool. E.g. for anahera: util/spd_tools/bin/part_id_gen \ ADL \ lp4x \ src/mainboard/google/brya/variants/anahera/memory \ src/mainboard/google/brya/variants/anahera/memory/mem_parts_used.txt BUG=b:191776301 TEST=Check that each variant's coreboot.rom is the same with and without this change. Built using: abuild -p none -t google/brya -a -x --timeless Change-Id: I08efe1d75438c81161d9b496af2fa30ce6f59ade Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-23mb/google/brya/var/taeko: Correct IOM port configurationJoey Peng
Enable programming of Type-C AUX DC bias GPIOs. BUG=b:199833078 TEST=Verify that a Type-C monitor works when connected in both orientations. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I4f6d80a9f2fc8cdc93226d6c234b54e5db830d71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-22mb/google/brya/var/redrix: Update audio settingWisley Chen
Update codec/amp setting. 1. Update hid for ALC5682VS 2. Add maxim properties. BUG=b:197076844 TEST=build and check SSDT Change-Id: I8bedd4d0737caf46769ad27bce1768c225ce8a82 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-22mb/google/brya/var/redrix: Correct SSD power sequenceWisley Chen
The current power sequencing for the SSD does not work in a non-serial enabled BIOS image. It appears that the FSP scans the PCIe RPs before the SSD has time to prepare itself for PCIe, so the FSP disables the RP and so depthcharge cannot find a boot disk. Changing the power sequence timing to enable power in bootblock and deassert reset in ramstage follows the SSD's power sequence and allows it to be discovered by the FSP so the RP does not get disabled. BUG=b:199714453 TEST=build, boot into SSD, and run reboot stress test. Change-Id: I5e7943a6cc88bc02bcbd97a1086b2d8044d7b1c3 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-21soc/qualcomm/common/spi: Add support for SPI common driverRavi Kumar Bokka
This implements qup spi driver for qualcomm chipsets Rename header file names for trogdor to prevent breakage. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I2f2b25b6661fcd518f70383da0c7788c5269c97b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55953 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-21soc/qualcomm/common/i2c: Add support for I2C common driverRajesh Patil
copy existing I2C driver from /soc/qualcomm/sc7180 to common folder. This implements i2c driver for qualcomm chipsets BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I16e6fc2c1c24b9814d1803bffd5cfbb657201cfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/55952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-21src/mainboard/herobrine: Load GSI FW in ramstageRavi Kumar Bokka
Load GSI FW in ramstage and make it part of RW BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I3d9caa0921fcf9ad67f1071cdf769a99fb6d1a30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-21src/mainboard/herobrine: Load respective QUP FW for I2C and SPIRajesh Patil
Loading QUP FW as per herobrine and piglin configuration for I2C, SPI and UART. As part of the code clean up, update the header files of the QUP drivers with the correct path. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: Ic218c6a91ffc4484830446d707d1f3403e2dc46b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-21mb/google/guybrush: Add placeholder SPD fileReka Norman
BUG=b:191776301 TEST=dewatt build no longer fails when a check for non-existent files in LIB_SPD_DEPS is added (following commit). Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: Iee0c5e8b71f7cc7c016a38a60569daff99a55027 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-21mb/google/guybrush: Use open drain eSPI alertsRob Barnes
Remove the override in guybrush devicetree that configured in-band eSPI alerts. This will result in guybrush using dedicated open-drain eSPI alerts. Guybrush boards must be reworked to connect the eSPI alert line, otherwise they will not boot with this change BUG=b:198596430 TEST=Boot on reworked guybrush BRANCH=None Change-Id: I185eec773336fb662d9fe7f4c11991813e4d7cd6 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57778 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-21util: Add DDR4 generic SPD for 4JQA-0622ADFrank Wu
Add SPD support for DDR4 memory part BUG=b:199469240 TEST=none Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ie67cf6b90304f0bcf80838866c7461c0cea86dc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-21mb/google/hatch/var/jinlon: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by adding alias for igpu (integrated graphics) device in the tree. Change-Id: I6d159f6dc674f4a0b38ebb553c5141105405a883 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-21mb/google/guybrush: Switch to using device pointersFurquan Shaikh
This change replaces the device tree walks with device pointers by adding alias for following devices: 1. FPMCU 2. WWAN Additionally, this change drops the __weak attribute for variant_has_* functions as there is no need for different implementations for the variants. Change-Id: I8af5e27f226270e6b40a50640c87de99a5a703f7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-21mb/google/dedede: Clean up LTE device enablingFurquan Shaikh
On some dedede variants, USB port 2.3/3.3 might be connected to either LTE device or Type-A external port depending upon FW_CONFIG. Commit 856b579 ("mb/google/dedede/var/kracko: Update LTE USB port configuration") enabled Type-A external port by default in override tree and updated the config dynamically for LTE USB device if FW_CONFIG indicated support for it. This was required because sconfig lacked the support for multiple override devices. Commit b9c22e0 ("util/sconfig: Compare probe conditions for override device match") fixed this behavior in sconfig and now we can add multiple override devices using different FW_CONFIG probe statements in override tree. Hence, this change moves the LTE USB device to override tree for metaknight, kracko and drawcia variants. In addition to that, drawcia needs to be update reset_gpio depending upon board_id. Thus, alias `lte_usb2` is used in drawcia override tree to fix the reset_gpio for older boards i.e. board_id <= 9. Change-Id: Ie5b205594680d9c2b8543c5c99325d95620cafd2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-21mb/google/dedede/var/sasukette: Drop special codec device handlingFurquan Shaikh
On sasukette, codec device might be either 10EC5682 or RTL5682 depending upon the provisioned FW_CONFIG value for AUDIO_CODEC_SOURCE. The HID for the device was updated in ramstage.c because sconfig lacked the support for multiple override devices. Commit b9c22e0 ("util/sconfig: Compare probe conditions for override device match") fixed this behavior in sconfig and now we can add multiple override devices using different FW_CONFIG probe statements in override tree. Hence, this change moves the codec device to override tree and drops the special handling in ramstage.c This change also probes for UNPROVISIONED value of FW_CONFIG for "10EC5682" device since some devices might have shipped with UNPROVISIONED value and using "10EC5682" device. Change-Id: I909a29c3df0cbb7ac3c07ca7663a49ad47007232 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-20mb/google/volteer: Switch to using device pointers using alias namesFurquan Shaikh
This change replaces the device tree walks with device pointers by using alias names for the following devices: 1. PMC MUX connector 2. SPI TPM 3. I2C TPM Change-Id: I38f87d3a90a7253f2a29aba7db9a9f9744985494 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya: Switch to using device pointers using alias namesFurquan Shaikh
This change replaces the device tree walks with device pointers by adding alias for dptf_policy generic device in the tree. Change-Id: I8fd5476a9cea84ab8b2678167b3e0504eecacf6c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya/var/redrix: Enable EC keyboard backlightWisley Chen
Enable EC keyboard backlight for redrix. BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage Change-Id: I175d8b91b37c6645ab1a7f05fc6915b3b016e3ff Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20herobrine: Add Hoglin variantShelley Chen
Create a variant for the QC CRD device. BUG=b:197366666 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_HOGLIN -x -a -B Change-Id: I883d17b3ad3c7e44a00f0d0e7007c119417c5028 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-09-20mb/google/brya/var/redrix: Get wifi sar nameWisley Chen
Add get_wifi_sar_cbfs_file_name() to return the wifi SAR file name BUG=None TEST=FW_NAME=redrix emerge-brya coreboot Change-Id: I87e7a30619fd93d0eae692c4c540c29850ff6721 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya: Add CHROMEOS_WIFI_SARWisley Chen
Add CHROMEOS_WIFI_SAR to include the SAR configs. BUG=None TEST=FW_NAME=redrix emerge-brya coreboot Change-Id: I50a413f3425d0b0e0b5ce71dabf6b9477800795e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/brya/var/felwinter: Configurate AUX pin for USB3 MBEric Lai
USB3 MB doesn't have re-timer. Thus we have to configurate the AUX pin. For now, we use USB3 DB to determine the USB3 MB. BUG=b:197907500 TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ide45c77e0a6f736a02d5dc9ad05aa1ef9e754fa5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-20mb/google/cherry: Fix unusable USB3 HUBRex-BC Chen
To save the S3 power, USB3_HUB_RST_L is externally pulled up to a weak resistor so we have to reset the hub via GPIO84 as early as possible. Otherwise the USB3 hub may be not usable. BUG=b:199822702 TEST=measure voltage of USB3_HUB_RST_L as 1.8V Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie87d631e83ede819ee9f9951dfc6517beae50247 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57663 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-20mb/google/brya/var/redrix: Update thermal table.Wisley Chen
Update thermal setting from thermal team. BUG=b:200134784 TEST=build and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: If74c3bc19cf4abd64d646b842cbb6a61b910e933 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-17mb/google/brya/primus: add NVMe power and reset pin to early_gpio_tableMalik_Hsu
NVMe needs extra time to run boot process, enable power and deassert reset for NVMe earlier in the boot flow that primus can successfully boot into OS with non-serial coreboot. BUG=b:199967106 TEST=USE="project_primus" emerge-brya coreboot and verify it builds without error. Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I9c66efe96515347502d059556052c764c1be5d09 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-17mb/google/dedede/var/cappy2: Update DPTF parametersSunwei Li
Update DPTF parameters from internal thermal team. BUG=b:197546694 BRANCH=dedede TEST=emerge-keeby coreboot Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com> Change-Id: I71a76a4d94a704aef7b3cefa2fca3009eb765bb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57693 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aseda Aboagye <aaboagye@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-17broadwell boards: Reflow USB2 parameter statementsAngel Pons
These statements fit on a single line. Reflow them to ease future works. Change-Id: Ie18e9a00f67b999fdcedcab3c28b68e34bc93da4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-17mb/google/brya/var/redrix: Enable USB4 PCIe resourcesWisley Chen
Enable USB4 PCIe resources for redrix BUG=b:192052098 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage Change-Id: I759618055b1282653d8a05fa66e8cdab0c43e3a6 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-17mb/google/brya: Add WWAN poweroff sequenceEric Lai
Follow FIBOCOM_L850-GL Hardware User Manual_V1.0.8. BUG=b:180166408,b:187691798 TEST=measure WWAN power off by scope is meeting the spec. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I6b2725cd61d5b54bc7fd70a9daffd29e7b43690b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-17skylake DDR4 boards: Set `CaVrefConfig` to 2Angel Pons
The `CaVrefConfig` FSP-M UPD describes how the on-die Vref generators are connected to the DRAM. With the exception of an early Skylake RVP board (which doesn't have coreboot support), mainboards using DDR3 or LPDDR3 memory should set `CaVrefConfig` to 0, whereas mainboards with DDR4 should set `CaVrefConfig` to 2. MRC uses this information during memory training, so it is important to use the correct value to avoid any issues, such as increased power usage, system instability or even boot failures. However, several Skylake DDR4 mainboards don't set `CaVrefConfig` to 2. Although they can boot successfully, it's not optimal. For boards that set `DIMM_SPD_SIZE` to 512 (DDR4 SPD size), set `CaVrefConfig` to 2. Change-Id: Idab77daff311584b3e3061e9bf107c2fc1b7bdf1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-16vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_mainHsuan Ting Chen
vboot_reference is introducing a new field (ctx) to store the current boot mode in crrev/c/2944250 (ctx->bootmode), which will be leveraged in both vboot flow and elog_add_boot_reason in coreboot. In current steps of deciding bootmode, a function vb2ex_ec_trusted is required. This function checks gpio EC_IN_RW pin and will return 'trusted' only if EC is not in RW. Therefore, we need to implement similar utilities in coreboot. We will deprecate vb2ex_ec_trusted and use the flag, VB2_CONTEXT_EC_TRUSTED, in vboot, vb2api_fw_phase1 and set that flag in coreboot, verstage_main. Also add a help function get_ec_is_trusted which needed to be implemented per mainboard. BUG=b:177196147, b:181931817 BRANCH=none TEST=Test on trogdor if manual recovery works Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: I479c8f80e45cc524ba87db4293d19b29bdfa2192 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57048 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google/guybrush: Reorganize bootblock_mainboard_early_init()Martin Roth
This now skips all of the pieces done by PSP_verstage. BUG=None TEST=Boot Guybrush with & without PSP_verstage Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5a6b8e2284e232c30c9f36ea7c6ab044e2644f7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-16mb/google/guybrush: Initialize WWAN GPIOs the same for PCI vs USBMartin Roth
Since the PCIE training for the USB WWAN card is no longer being run, we can initialize the GPIOs the same for all WWAN cards. BUG=b:193036827 TEST=Boot and reboot with fibocom FM350-GL & L850GL modules Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Idc9a7cb883fc8dd6bbc6077b8ea99182f17f888b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57317 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google/guybrush: If not using PCIe WWAN, disable the portMartin Roth
Check to see if the PCIe slot needs to be activated for the WWAN card. If it doesn't, leave it unused so it will be powered off and not do the PCIe training. BUG=b:193036827 TEST=Boot & Reboot guybrush with both PCIe & USB WWAN cards. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I79c32e4814672c03ee0821786d5be1c77fd1b410 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-16mb/google/brya/variants/gimble: Add fw_config probe for ALC5682-VD/ALC5682-VSMark Hsieh
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name. Update hid name depending on the AUDIO field of fw_config. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:200009010 TEST=ALC5682-VD/ALC5682-VS audio codec can work Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I09c7830fff6b318cf1a1f4a44ee0a819691f7c58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57673 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google/brya/variants/kano: Add MIPI camera supportDavid Wu
Add MIPI camera support for OVTI2740 BUG=b:196937374 b:194926283 TEST=Build and boot on Kano Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I248c64b9460c898f9faa5f7ac8cf339a9c814013 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-16mb/google/brya/var/redrix: Add fw_config probe for eKT3764/eKT3644Wisley Chen
Report different ACPI device depending on TP_SOURCE field of fw config (SSFC-bit8~bit9) for elan touchpad. BUG=b:199503876 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I15781c2d942d81e11c296ea2f2586ba82f67e4a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-16mb/google/brya/var/redrix: Select camera module based on SSFC valueArec Kao
This patch has changes to support multiple camera modules, base on the value set in the SSFC_CONFIG. BUG=b:198235323 TEST=tested the changes with redrix 5MP(ov5675/hi556) camera. Change-Id: I71c8355617171ec7d08862759b87d4bf12ce2924 Signed-off-by: Arec Kao <arec.kao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57272 Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google/brya: Fix brya0 WWAN poweron sequencingTim Wawrzynczak
The PCIe WWAN module used on brya0 requires control over 4 signals to successfully power it on. It is desirable to do this before passing control to the payload, because the modem requires a ~10 seconds initialization phase before it can be used. The corrected sequence looks like: 1) Drive device into full reset and enable power in bootblock 2) Deassert FCPO in romstage, after power rails stabilize 3) Deassert WLAN_RST#, then WLAN_PERST# in ramstage BUG=b:187691798 Change-Id: I10f15a4dcfd86216c334fb24b4693ea250d35ee4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-16mb/google/brya: Update state of BB_RT_FORCE_PWR gpiosTim Wawrzynczak
This GPIO is used to force the USB retimers on Type-C ports to stay in a powered state and can be used e.g., during a firmware update to the retimer to force power on even when no device may be connected to the port. However, its power rail is controlled elsewhere and coreboot is not applying a FW update, so this GPIO should be driven low instead. BUG=b:193402306 TEST=compile Change-Id: I976a0b8252b31aacef476d5ee4bcf6b1ef2e79de Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-09-16mainboard/google: Update the TLMM registers for sdhcShaik Sajida Bhanu
Update the TLMM register values for eMMC and SD card on Trogdor, Herobrine and Mistral boards. BUG=b:196936525 TEST=Validated on qualcomm sc7280 and sc7180 development board and checked basic boot up. Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Change-Id: Iccdb7757027c6de424a82e4374bad802501ac83c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57450 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-16mb/google/trogdor: Add mipi panel for wormdinglerZanxi Chen
Add mipi panel support for wormdingler - Add the following panel for wormdingler: INX P110ZZD-DF0 BOE TV110C9M-LL0 - Use panel_id to distinguish which mipi panel to use. - Setup panel orientation BUG=b:195898400,b:198548221 BRANCH=none TEST=emerge-strongbad coreboot Change-Id: I8cd28e024ecbfdcd473bc39efb529eb4aca1b5d0 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-09-16mb/google/dedede/var/magolor: Generate SPD ID for supported partsTyler Wang
Add supported memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: 1. Samsung K4U6E3S4AB-MGCL 2. Hynix H54G46CYRBX267 BUG=b:199032134 TEST=emerge-dedede coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: If8b75f9ed4d789d6c9c4365c517358df8d6e55c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-09-16mb/google/dedede/var/cappy2: Enable PIXA touchpadSunwei Li
Add PIXA touchpad into devicetree for cappy2. BUG=b:193099842 BRANCH=dedede TEST=built cappy2 firmware and verified touchpad function Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com> Change-Id: I840a3ffbaaaac39eaf13bf77e203f6dffdddd3f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-16mb/google/dedede/var/cappy2: Add USB2 PHY parametersSunwei Li
This change adds fine-tuned USB2 PHY parameters for cappy2. BUG=b:199485217 TEST=Built and verified USB2 eye diagram test result Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com> Change-Id: I2aac29e8bba0bf3eff91898ded7561b6211af789 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-16mb/google/dedede/var/cappy2: Configure I2C times for tp & codecSunwei Li
Configure I2C high / low time in the device tree to ensure I2C CLK runs accurately between 380 kHz and 400 kHz. Measured I2C frequency just as below after tuning: touchpad:390kHz codec:395.8kHz BUG=b:199481261 BRANCH=dedede TEST=Build and check after tuning I2C clock is between 380 kHz and 400 kHz Signed-off-by: Sunwei Li <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ifadc3d19eb57fe6f67504be154c30df7bc0fee71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-16mb/google: Unify all variants to start with "-> "Martin Roth
All variants originally had been changed to start with an arrow with two spaces following it to line up with the platform name. A number of recent platforms were added only using a single space. This change updates them all to have two spaces so they line up again. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Iab9e6207fff5a7d2f6d76e5ca33eeaca721a224f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-16soc/intel/alderlake: Select SOC_INTEL_COMMON_BLOCK_TCSS at SoC levelSubrata Banik
This patch selects SOC_INTEL_COMMON_BLOCK_TCSS from Alder Lake SoC Kconfig and drops SOC_INTEL_COMMON_BLOCK_TCSS Kconfig selection from specific mainboard (brya) to ensure all Alder Lake mainboards can make use of common TCSS block. BUG=b:187385592 TEST=Type-C pendrive/Gen-2 SSD detected as Super speed. Change-Id: I85f6a967eb34ea760418131a9586bfdeb13c9b5d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-16soc/qualcomm/common/qup: Add support for QUP common driverRavi Kumar Bokka
copy existing QUP driver from /soc/qualcomm/sc7180 to common folder. This QUP common driver provide QUP configurations, GPI and SE firmware loading and initializations. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I95a0fcf97b3b3a6ed26e62b3084feb4a2369cdc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-16mb/google/herobrine: Increase the ROM size to 64 MBShaik Sajida Bhanu
SPI NOR size should match with coreboot ROM size. On QCOM Piglin board SPI NOR size is 64MB and the default coreboot ROM size is 8MB. So, update the coreboot ROM size to match with SPI NOR size. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board and checked basic boot up. Change-Id: I78f3f402b383bbad303f26c31d3d973c5f20d172 Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-16mb/google/dedede: Override panel orientation for buggzyTim Wawrzynczak
Buggzy's panel is oriented with its "right" side facing upwards, therefore the firmware screens in depthcharge were incorrectly rotated. This patch changes the orientation of the framebuffer provided by the FSP. BUG=b:194967458 BRANCH=dedede Change-Id: I4a5fbfcfc1c362da1bddd23c7d132416db3691c9 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-16mb/google/brya/var/redrix: Add privacy screenWisley Chen
Add privacy screen support. BUG=b:198188272 TEST=build and check SSDT Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: Ied9d9138f68ba45c4d746aed1cd3f828d4ab7fae Reviewed-on: https://review.coreboot.org/c/coreboot/+/57289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-15google/trogdor: Fix Mrbland panels to point LEFT_UPJulius Werner
CB:57324 moved panel orientation from panel_serializable_data to the responsibility of the mainboard, but in parallel to that patch we landed support for some new panels on the Trogdor mainboard that should be pointing LEFT_UP. This patch fixes up the panel orientation for those. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I416b6c8804a88b36f723c4690ed78aff928a0f8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2021-09-15mb/google/brya/variants/gimble: update fw_config for next build phaseMark Hsieh
Update audio FW config based on the schematic carbine_adl-p_evt_20210901.pdf BUG=b:199180746 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I4f8ee1a97dd92c7aa0131cd0a77b05f851a26b05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57529 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-15mb/google/brya/var/felwinter: Add R4/R5 for dmicEric Lai
Based on latest schematic (0903) update the GPIO table. BUG=b:197308586 BRANCH=None TEST=emerge-brya coreboot Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie79ba14859f7fa4ea66a0f0d58287f4515d01baf Reviewed-on: https://review.coreboot.org/c/coreboot/+/57636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-09-15mb/google/brya: Add support for romstage GPIO tableTim Wawrzynczak
Some variants may require more complex power sequencing than can be accomodated with just 2 GPIO tables, therefore introduce one in romstage as well. BUG=b:187691798 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7a63a2ee2cd036b9ae5822be9c87d8a026a54922 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-15mb/google/brya: Enable USB4 PCIe resources for kanoDavid Wu
Enable USB4 PCIe resources for kano BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Iec914db6914116ebc914a2ba9ff67344b202926b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-15brya/gimble: add `get_wifi_sar_cbfs_filename()` in variant.cMark Hsieh
gimble only uses one WiFi SAR table, contained in a file named wifi_sar_0.hex BUG=b:189068477 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ied030b79183cc6f962674260e7a82a7261b317ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/57616 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-15google/trogdor: add new variant kingoftownKevin Chiu
This patch adds a new variant called kingoftown. it's clamshell only, no FPR, eDP panel. BUG=b:198365759 BRANCH=master TEST=make Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I648664c50dfad11530a854f574f39264158b44e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-09-13mb/google/trogdor: Add PANEL_ID to SKU_IDZanxi Chen
In order to distinguish which mipi panel to use, it need to read the PANEL_ID, and combine the PANEL_ID and SKU_ID into a new SKU_ID. BUG=b:197708579,b:191574572,b:198548221 TEST=PANEL_ID should be set correctly. BRANCH=none Change-Id: I018b3f460f9d084d1a3f0dac026f1cd9dde284e2 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-09-13mb/google/volteer: Enable USB4 resources using SoC KconfigFurquan Shaikh
This change uses the newly added `SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES` Kconfig to enable USB4 resources and drops the configuration in mainboard. Change-Id: Id0951937cab8bf5432fc902ba7af21f56fe98087 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-13mb/google/dedede/var/bugzzy: Generate SPD ID for K4U6E3S4AA-MGCRSeunghwan Kim
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1. K4U6E3S4AA-MGCR (Samsung) BUG=b:192521391 BRANCH=dedede TEST=Build and boot bugzzy board Change-Id: Ic0b02559c671845a73a71bd57cd7237850c76645 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-11mb/google/brya: Replace white space with tabSubrata Banik
This patch unifies line indentation. Change-Id: Ieeb580057d8abb20afe3a5d73f5f835e6d31c899 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-11mb/google/asurada: fine tune the data lane trail for ANX7625Hung-Te Lin
The ANX7625 display bridge requires customized hs_da_trail time. This patch is based on CB:51433 (commit 6482b16, "mb/google/kukui: fine tune the data lane trail") BUG=b:198558237 TEST=emerge-asurada coreboot BRANCH=asurada Signed-off-by: Hung-Te Lin <hungte@chromium.org> Change-Id: I0eedb8fa6a1b3dfd9619c7cbf755c9c4071a8484 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-09-11mb/google/trogdor: Add mipi panel for mrblandZanxi Chen
Add mipi panel support for mrbland - Setup gpio and modify LCD sequence. - Use the following panel for mrbland: AUO B101UAN08.3 BOE TV101WUM-N53 - Use panel_id to distinguish which mipi panel to use. BUG=b:195516474,b:197300875,b:197300876 BRANCH=none TEST=emerge-strongbad coreboot Change-Id: Ib7cd2da429b114bf6bad5af312044a0f01319b46 Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57336 Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-10mb/google/guybrush: Invert USB descriptions in devicetreeRob Barnes
The USB descriptions are flipped. Fix by inverting the USB descriptions in devicetree. BUG=None TEST=Build BRANCH=None Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I4b33f4de137536c5f3592380da15f6b3a3633bf5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57538 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-10mb/google/guybrush: Document USB mapping in devicetreeRob Barnes
Add a short documenting comment to each usb entry in devicetree so it is clear which function each usb port maps to. BUG=None TEST=Build BRANCH=None Change-Id: I14cbb6af021bb27c89aa82456722f21aa09617be Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56725 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-10cannonlake mainboards: Set PMC as hidden in devicetreeTim Wawrzynczak
FSP-S hides the PMC from the PCI bus when it runs, but there are still initialization steps coreboot programs for the PMC. Therefore, change all of the cannonlake mainboards to set the PMC as hidden in the devicetree, which means the device will be skipped during enumeration, but device callbacks are still issued as if the device were enabled. TEST=Ran full patch train on google/dratini, disassembled SSDT and the PEPD device matches what is in pep.asl. Also verified via dmesg that the INT33A1 device is still initialized by the kernel. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib4a20ce9075ce7653388a5d3e281fe774bf89355 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-10mb/google/asurada: enable MIPI_DSI_MODE_LINE_END to fix display issuesHung-Te Lin
The ANX7625 needs explicit LINE_END to output proper display data. This patch is based on CB:51435 (commit b923931, "mb/google/kukui: Add flag for MIPI_DSI_MODE_LINE_END ANX7625") BUG=b:198558237 TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: Id5666fa1bcf96002725509d7436ea1ff5febef93 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57486 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-10mb/google/asurada: power on panel after DSI is readyHung-Te Lin
Some bridge chips or panels require DSI signal output before the DSI receiver is ready to work. This patch is based on CB:47380 (commit b32e4d6, "mb/google/kukui: Add panel api after dsi start") BUG=b:198558237 TEST=emerge-asurada coreboot BRANCH=asurada Change-Id: Id72560caee9352f88db2de7269b1472f56ac1bdf Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57485 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-09mb/google/guybrush/var/nipperkin: Add ELAN TS supportKevin Chiu
ELAN TS: eKT3644 BUG=b:194961444 TEST=emerge-guybrush coreboot chromeos-bootimage TS is functional Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Id1601efbbe419bb28233a2678fdde005a55da671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-09mb/google/dedede/var/gooey: Add fw_config probe for ALC5682-VD & VSStanley Wu
ALC5682-VD/ALC5682-VS load different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. Define SSFC bit 9-11 in coreboot for codec within ec. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:193694180 TEST=ALC5682-VD/ALC5682-VS audio codec can work Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Ib458cf47909a2d7a65f086c5f30f85a16f78d589 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 11:30:03 +0000