summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2021-01-22mb/google/volteer/var/elemi: Update dptf parametersWisley Chen
Update DPTF setting from thermal team. BUG=b:177635236 BRANCH=volteer TEST=emerge-volteer coreboot chromeos-bootimage, and verified by thermal team. Change-Id: I87256b5c210ef12c09ef6dd948d80f406ae0500b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-01-22mb/google/volteer/variants/eldrid: Configure USB2 port for Type-CNick Chen
1. USB2 ports 3 and 8 assigned to Type-C connector 2. USB2 port 3 keep USB2_PORT_SHORT setting and add .type_c flag BUG=b:177481076 TEST=tested on eldrid Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I42a39318a151bdf1f5aeb84bb1992be128cb4a4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22mb/google/kukui: Enable MT8183_DRAM_EMCP for katsuSunway
The katsu project will be using eMCP board design. BUG=b:176271935 TEST=Boots on chromebook katsu successfully. BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I733a9a79e2ea6501e26bf79bfce2b1934a295342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48893 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/reef: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I279956f30cbb6fb031cdfe6aaa09b644b6b7d3e7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49427 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/reef: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms. This is done by adding missing pads to the bootblock gpio table. The soc code gets dropped in CB:49410. Change-Id: I95993b1bd4f1fd8b4ac7b21fb89ec4d196b0240a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49412 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/hatch: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I62ffbe36bd7b7675aa0f41a8c6e9214d04ad4ae5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49428 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/glados: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I6fedcebea3bb31d992bac1e3b21382fea93a8b82 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49429 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/octopus: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ieeb738afd54e77ee853ee109009f611411aa0d4a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49426 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/dedede: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I5482f44b361925b7d2dbcbf1065c1be035c68b0b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49424 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/drallion: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I7dcf88d61c305f0598a0a79f8cfa46ef5009564b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-21mb/google/octopus: do LPC/eSPI pad configuration at board-levelMichael Niewöhner
Do LPC/eSPI pad configuration at board-level to match other platforms by adding an appropriate early gpio table in the bootblock. The soc code gets dropped in CB:49410. Change-Id: Ie33bae481f430a1c4410a0a4e2b2a34a3e78adaa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49411 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/volteer/variant/lindar: Enable SA GV settingKevin Chang
Allow MRC training in SA GV. BUG=b:177779469 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Idc9f634135b489450f53f8cd28d80649309d0f70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-21mb/google/guybrush: Add default FMD file to the buildMathew King
BUG=b:175143925 TEST=builds; binary has correct layout Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I4f3826c8ed0dfd7219eaa5f0cc285f1fe89a4e1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-21mb/google/volteer/variant/lindar: Configure USB2 port for type-cKevin Chang
Assigned USB2 port to type-c use. BUG=b:177483060 BRANCH=firmware-volteer-13672.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I9bd820406124927d56296508be05033217c0d472 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49638 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/google/dedede/var/boten: Update gpio config for botenStanley Wu
Correct GPIO settings as below reason: 1. GPP_G7 not being used but set to NF. 2. GPP_C22 and GPP_C23 is set to NC but internal pull down to 20K BUG=b:177283756 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Change-Id: Idf25674efa2336bde98c5abaff278484fd71ea8b Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/google/dedede/var/boten: Replace generic driver with sx9324 driverStanley Wu
Replace i2c driver for the SX9324 proximity detector device. This is first draft settings, will modify it after fine tuning. BUG=b:175932166 BRANCH=dedede TEST=run "i2cdump -y -f 15 0x28" to confirm registers as except. un-approach： => register address: 0x01 value: 0x00 approach: => register address: 0x01 value: 0x02 Change-Id: I0c8b5948266a07092799c6db556383fa08b924e6 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-21mb/google/dedede/var/boten: Update gpio settingStanley Wu
Correct GPIO settings as below reason: 1. GPP_D19/GPP_D20/GPP_D21 not being used but set to NF. 2. GPP_B7 should configure as WWAN SAR detect ODL, but set to NC BUG=b:175932166 BRANCH=dedede TEST=emerge-dedede coreboot chromeos-bootimage and boot into emmc Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Id7780d5332551ed3fd20ef14f8b5d31164f16385 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-20mb/google/poppy: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I795b8da3c5e1efb51c8fe4673f025839a1c630bc Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/fizz: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I2f484d232a46214ff98168f41f96d56b047892e2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/eve: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I67bdd9a96928b77a9a178afea7dab03dc370312c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-20mb/google/sarien: do early pad configuration in early bootstageMichael Niewöhner
Do early pad configuration in early bootblock before console init, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I342b9217af0288a3b525e629aac791eb0f880442 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-19trogdor: Initialize BACKLIGHT_ENABLE to 0, only turn it on in payloadJulius Werner
The BACKLIGHT_ENABLE pin on this board unfortunately defaults to a pull-up on power on, meaning the backlight is immediately enabled. Best we can do about that is to turn it off again early and wait until it is actually correct in the panel power sequence to turn it back on. Some panels want an explicit 80ms delay after training the eDP connection before the backlight is turned on (this is probably just to avoid temporary display artifacts, but whatever). We don't want to busy-wait that extra time, so instead just delegate turning on that GPIO to the payload (which is also in charge of the backlight PWM already). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id8dafbdcb40175fbc9205276eee698583b971873 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2021-01-19mb/google/volteer: select GOOGLE_SMBIOS_MAINBOARD_VERSIONZhuohao Lee
In order to use the function smbios_mainboard_version() to query the board revision from the EC. we need to select GOOGLE_SMBIOS_MAINBOARD_VERSION. BUG=b:177818769 TEST=1. emerge-volteer coreboot chromeos-bootimage 2. flash the image to the device and check board rev by using command `dmidecode -t 1 | grep Version` Change-Id: I2474ee03845356d0775f6da25274f696ad33f935 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-19soc/amd/picasso: move HAVE_ACPI_TABLES from mainboards to SoCFelix Held
The SoC code has in implicit dependency on this option, so select it in the SoC code instead of the mainboard code. Change-Id: Iea908c142f4a94a107cf74a31d9f5e29668d4b5b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-19mb/google/dedede: Create sasukette variantTao Xia
Create the sasukette variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:175848514 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_SASUKETTE Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: I0a554efe0919dc2f5880f0f7817a37bd4be88ed9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-19mb/google/dedede/var/sasuke: Add LTE modem supportSeunghwan Kim
This change enables LTE modem for sasuke. - Add LTE modem device into devicetree - Add GPIO control for LTE modem power on and off BUG=177177967 TEST=Built and verified modem device existence with lsusb Change-Id: I34ba8ab00b73f24d1786ab014e9981b172a63a27 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49163 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19mb/google/dedede/var/sasuke: Enable Wifi SAR for sasukeSeunghwan Kim
BUG=None BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Cq-Depend: chrome-internal:3531583 Change-Id: If69258db257353c9b859a27e2a4c088f74b00ab9 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49466 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19mb/google/dedede/var/lantis: Update DPTF parametersTony Huang
DPTF paramerters from thermal team. 1. PL1 max =5.8W 2. PL1 min =3.8W 3. PL2 =20W BUG=b:177249297 BRANCH=dedede TEST=build image and verified by thermal team. Change-Id: I19654b65613817ebecf979ce7ac4f76d370ebdc2 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-01-19mb/google/kukui: Add discrete EMCP LPDDR4X table for Kakadu/Katsuxuxinxiong
Add EMCP LPDDR4X DDR MT29VZZZCD9GQKPR for ram id 8. BUG=b:176262460 BRANCH=master TEST=emerge-jacuzzi coreboot Change-Id: If00478b9b05ab3ec48b6a8dec37e9f2f9f04e188 Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49447 Reviewed-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-19mb/google/zork: remove MST i2c from dalbozPeter Marheine
Dalboz variants do not use an MST hub; remove the i2c tunnel for it. That bus is actually connected to the battery on these devices, which should not be exposed to the AP. BUG=b:175658311 TEST=builds BRANCH=zork Change-Id: If1714a5c441bf185efd2517c7c94e57b5f351f5a Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49628 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18mb/google/dedede/var/sasuke: Disable PCIE RP8 and CLKSRC3Seunghwan Kim
This change disables unused PCIE RP8 and CLKSRC3. Without this change sasuke cannot enter into s0ix properly. BUG=b:176862270 TEST=Built and verified entering s0ix Change-Id: I0828813ed7924669cb0ff97be2565579762c810f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49300 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18mb/google/dedede/var/sasuke: Add USB2 PHY parametersSeunghwan Kim
This change adds fine-tuned USB2 PHY parameters for sasuke. BUG=176060155 TEST=Built and verified USB2 eye diagram test result Change-Id: Id374ed238d92077ca28c1162fd9f070029ee71bd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49321 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18mb/google/volteer/var/elemi: Configure USB2 portsWisley Chen
Configure the USB2 port 3/4/9 1. USB2 port3 assign to WWAN, and elemi have no WWAN. 2. USB2 port4/port9 connect to Type-C C1/C0 BUG=b:177483059 TEST=emerge-volteer coreboot Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I9affc69cc325b5eb0219b50bfe46f66eb0bb2016 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49473 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18ACPI: Select ACPI_SOC_NVS only where suitableKyösti Mälkki
Having some symmetry with <soc/nvs.h> now allows to reduce the amount of gluelogic to determine the size and cbmc field of struct global_nvs. Since GNVS creation is now controlled by ACPI_SOC_NVS, drivers/amd/agesa/nvs.c becomes obsolete and soc/amd/cezanne cannot have this selected until <soc/nvs.h> exists. Change-Id: Ia9ec853ff7f5e7908f7e8fc179ac27d0da08e19d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao
2021-01-16mb/google/volteer: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I5e07584d7857052c7a9388331a475f5a073af038 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-15mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
Enhance USB 2.0 M/B C0, DB C1 A1 port: HS DC Voltage Level(TXVREFTUNE0): 0xe COMPDISTUNE(COMPDISTUNE0): 0x7 BUG=b:165209698 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I371e4295c2ee161096f0a277c0c649bf217269b2 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-15mb/google/zork/var/shuboz: update STAPM add telemetry settingKane Chen
1. Modify STAPM time constant 2500 to 1400. 2. Add telemetry setting: VDD Slope : 30518 VDD Offset: 435 SOC Slope : 22965 SOC Offset: 165 BUG=b:177399751 BRANCH=master TEST=emerge-zork coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I251029389c10ee0f17f368b1c00ac666d372fc3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/49386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-01-15mb/google/zork: update DRAM table for berknipKevin Chiu
Add Hynix DDR4 DRAM H5ANAG6NCJR-XNC, index was generated by gen_part_id BUG=b:176313722 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ia1947fa158a1113c4a0b1a0d55f657ddaac43382 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-15mb/google/kukui: Add new ddr architecture support for kukuiShaoming Chen
Two configuration files are added: 1. H9HCNNNFAMMLXR-NEE-8GB: new byte mode 2. MT53E1G32D2NP-046-4GB: new single rank mode Also initialize the rank number field 'rank_num' for all configs. BUG=b:165768895 BRANCH=kukui TEST=DDR boot up correctly on Kukui Signed-off-by: Shaoming Chen <shaoming.chen@mediatek.corp-partner.google.com> Change-Id: I1786c1e251e8d6e110cbdce79feeb386db220404 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49108 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-15mb/google/zork/var/vilboz: Add WiFi SAR for VilbozFrank Wu
The fw_config field SPI_SPEED is not used for zork devices. To define SAR config, use the fw_config bit[23..26]. Then vilboz can loaded different WiFi SAR table for different SKUs. BUG=b:176858126, b:176751675, b:176538384 BRANCH=zork TEST=emerge-zork coreboot chromeos-bootimage, then verify that tables are in CBFS and loaded by iwlwifi driver. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I5ba98799e697010997b515ee88420d0ac14ca7ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/49296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-15mb/google/volteer/var/voema: Configure USB2 ports for Type CDavid Wu
Based on voema schematics, two USB2 ports 3 and 5 are assigned to type C connectors on Voema board. BUG=b:177483061 b:172535001 TEST=Build and boot Voema. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I12cef85595e511801ab9c563ae4aa26e25875679 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-15cpu/intel/haswell: Factor out ACPI C-state valuesAngel Pons
There's no need to have them in the devicetree. ACPI generation can now be simplified even further, and is done in subsequent commits. Change-Id: I3a788423aee9be279797a1f7c60ab892a0af37e7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46908 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-15mb/google/dedede/var/boten: Update LTE GPIO configurationKarthikeyan Ramasubramanian
LTE module is not expected to be powered off during warm reset. Hence configure the LTE_PWR_OFF_ODL (GPP_A10) gpio pad reset configuration to PWROK and set the TX state to 1. BUG=b:163100335 BRANCH=dedede TEST=Verified through the waveforms that power sequence is meeting the LTE module requirements. Change-Id: I8676da6186559288aabe078b6158fc01075c7b41 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-01-15mb/google/dedede/var/metaknight: Add LTE power on/off sequenceTim Chen
LTE module used in metaknight has a specific power on/off sequence. GPIOs related to power sequence are: * GPP_A10 - LTE_PWR_OFF_R_ODL * GPP_H17 - LTE_RESET_R_ODL 1. Power on: GPP_A10 -> 20ms -> GPP_H17 2. Power off: GPP_H17 -> 10ms -> GPP_A10 3. Warm reset: GPP_A10 keeps high, GPP_H17 goes low at least 2ms Configure the GPIOs based on these requirements. BUG=b:173671094 TEST=Build and boot Metaknight to OS. Ensure that the LTE module power sequence requirements are met. Change-Id: Ibff16129dfe2f1de2b1519049244aba4b3123e52 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-15mb/google/asurada: Implement HW reset functionYidi Lin
TEST=call do_board_reset() manually. Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I355f71e731f1045cd80a133cd31cf4d55f14d91f Reviewed-on: https://review.coreboot.org/c/coreboot/+/49237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-14mainboard/volteer: Configure UsbTcPortEn valueBrandon Breitenstein
The default value is not sufficient to correctly configure the Type-C ports as it has all ports disabled by default. On Volteer ports 0 and 1 are enabled so setting this value to 0x3 and correctly keeping the IomPortPadCfg values at 0 for ports that have a retimer and ports that are not configured. These values were set to 0x90000000 to avoid s0ix issues which arose from the UsbTcPortEn value being incorrect. BUG=b:159151238 BRANCH=firmware-volteer-13672.B TEST=Built image for Voxel and verified that s0ix cycles complete without any issues Change-Id: Ib4f2bd0f68debd4e97ccaab9e1d8a873dc4e4d9f Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48814 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/stoneyridge: use SOC_AMD_COMMON_BLOCK_UARTFelix Held
Since the functions that get called by the coreboot console initialization code aren't in the SOC-specific code anymore, the SOC's uart.c can be included unconditionally in the build now. This also replaces the STONEYRIDGE_UART Kconfig option with the common AMD_SOC_CONSOLE_UART one. Change-Id: I09c15566a402895d6388715e8e5a802dc3c94fdd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14mb/google/dedede/var/boten: Support ELAN i2c-hid touchscreen for botenflexStanley Wu
Update ELAN i2c-hid touchscreen configuration BUG=b:172517685 BRANCH=dedede TEST=Verify touchscreen is working fine on botenflex Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Ia7c81fd0a772968ec32406f1e366a90481fc5ad8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-13mb/google/kahlee,zork: Use mainboard_fill_gnvs()Kyösti Mälkki
Change-Id: Ic9cdcc497bf1a9f5bfed5e6d95040bfa602b0b89 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48732 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-13mb/google/volteer/variants/delbin: Update PL1 min and max for DelbinDeepika Punyamurtula
Update PL1 min and max values for Delbin systems BUG=b:168958222 BRANCH=None TEST=Build and verify on delbin system Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Change-Id: I2152f0dbeb0ae463b78464571b6c434830f0082a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-13mb/google/volteer: Add CSE Lite SKU support to Copanohao_chou
This will allow CSE RW FW updates and also fixes the problem where no sound is emitted from the speakers. BUG=b:174338903 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I875f6b32c4053ef6d23ad7606cd35a129a78c306 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49290 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-12mb/google/brya: Initialize overridetree.cbEric Lai
Initiate overridetree.cb based on latest schematic. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I31e5ac1703476083ac71dac30b0a3299b38384c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-12mb/google/brya: Add gpio tableEric Lai
Follow latest schematic to fill gpio table. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3a983605b5139ff8510a0cf225e6564b9215cb1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-12mb/google/volteer: Configure Voxel USB2 ports for Type CJohn Zhao
Two USB2 ports 4 and 9 are assigned to type C connectors on Voxel board. This update configures these USB2 ports for Type C which will allow USB2 port reset message upstream from PCH to CPU to recover a USB3 device that downgraded to USB2 to upgrade back to USB3. BUG=b:176575892 TEST=Booted to kernel on Voxel board and verified usb2 port reset message enable bits through pch xhci_mmio_base + R_XHCI_MEM_U2PRM_U2PRDE where the offset register R_XHCI_MEM_U2PRM_U2PRDE has value 0x92f4. Validated various USB3 devices enumeration. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia370a449a41701e690c1c507d70bedfce2076a65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2021-01-12mb/google/zork/var/vilboz: Fix FW_CONFIG_SHIFT_WWAN valueJohn Su
The FW config takes 2 bits for USE_FAN[27,28]. So FW_CONFIG_SHIFT_WWAN value should be 29. BUG=b:174121847 BRANCH=zork TEST=build vilboz Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ica6d04f9c48aa0800189283608bf57416ac75cf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49236 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/octopus: add audio codec into SSFC support for MeepTony Huang
BUG=b:171757619 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Change-Id: I37390535e263b4b9547ad7307278e3360ba836bd Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2021-01-11mb/google/volteer: Add CSE Lite SKU support to DrobitWayne3_Wang
This will allow CSE RW FW updates and also fixes the problem where no sound is emitted from the speakers. BUG=b:176536593 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: Wayne3_Wang <wayne3_wang@pegatron.corp-partner.google.com> Change-Id: I69962a5b7c7c464280b35c834f7ee1c9b77db6fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/49197 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-11mb/google/volteer: Set FORCE_PWR low at boot timeJohn Zhao
While FORCE_PWR is set high, it prevents retimer from entering low power state. S0ix failure occurs while USB4 Gatkex is connected on Port-0. This change sets FORCE_PWR(GPP_H10) low. This FORCE_PWR GPIO will be toggled by kernel through DSM method while updating retimer firmware. BUG=b:174166586 Cq-Depend: chromium:2594438 TEST=Verifed s0ix cycles with USB4 Gatkex connected on Port-0. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ie4b442e1078379c522a94bfdc00cd99e6f9b8170 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-11mb/google/dedede/var/magolor: Remove the unused touch controllerRen Kuo
Remove unused touch controller - Goodix BUG=None BRANCH=dedede TEST=build firmware Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I2a01666bc1e353e21ddf961a0eb721a0cb4013db Reviewed-on: https://review.coreboot.org/c/coreboot/+/49221 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/google/cyan: Move board_id() to mainboard_fill_gnvs()Kyösti Mälkki
Only a google/cyan variant evalutes BDID in ASL. Change-Id: I3d839333333b4762ae5350734c85471a3c12838a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49003 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10soc/intel: Replace acpi_init_gnvs()Kyösti Mälkki
Rename these to soc_fill_gnvs() and move the callsite away from mb/. Change-Id: I760c36f65c6122103f2be98fc11ee13832c2772e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48716 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Rename acpi_create_gnvs() functions under mb/ to reflect their changed functionality. Remove now empty mb/acpi_tables.c files. Change-Id: Ia366867ef73d1ade9805dc29b8e14b3073f44f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48707 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10mb/x/acpi_tables: Move EC_RW detectionKyösti Mälkki
These boards without ChromeEC do not set ACTIVE_EC_RW flag as part of the gnvs_assign_chromeos() function. Create abstraction to avoid <vendorcode/chromeos/x> include. Change-Id: Ic6029e1807fcfe7dd2c766ce8221e347b6b096f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48777 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-10ACPI: Drop redundant ChromeOS setup for GNVSKyösti Mälkki
Already done in common gnvs_get_or_create() implementation once gnvs_chromeos_ptr() is defined for platforms. Change-Id: I90fa2bc28ae76da734b3f88be057435aed9fe374 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48703 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-09mb/google/parrot: Replace while-loop with do-whileFelix Singer
Fixes linter error complaining about trailing semicolon. Change-Id: I3f74f25cb2e3edcdd509abd86d80098241c05741 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-09mb/google/parrot: Let else statement follow closing braceFelix Singer
Fixes a linter error. Change-Id: I1302e32b0d52e37d9cb4503128edc7d1df1c3bd8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-09mb/google/parrot: Get rid of hard-coded function names in printksFelix Singer
Instead of hard-coding function names in strings, use the __func__ constant for better maintainability. Change-Id: I151560cd5a135e00f494eda3f9d3b592ee9d984a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-09mb/google/parrot: Fix spacing issuesFelix Singer
Add a space after each comma to fix linter issues. Change-Id: I5533c4fc7aa0e986da4350ec56b84903b3111a07 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-08mb/google/volteer: Configure Delbin USB2 ports for Type CJohn Zhao
Two USB2 ports 4 and 9 are assigned to type C connectors on Delbin board. This update configures these USB2 ports for Type C which will allow USB2 port reset message upstream from PCH to CPU to recover a USB3 device that downgraded to USB2 to upgrade back to USB3. BUG=b:176575892 TEST=Booted to kernel on Delbin board and verified usb2 port reset message enable bits through pch xhci_mmio_base + R_XHCI_MEM_U2PRM_U2PRDE where the offset register R_XHCI_MEM_U2PRM_U2PRDE has value 0x92f4. Validated various USB3 devices enumeration. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Idb3ce949e1ecf3adc7615e0af79a38a0cc9be18f Reviewed-on: https://review.coreboot.org/c/coreboot/+/49202 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/octopus: add audio codec into SSFC support for BobbaMarco Chen
BUG=b:174118027 BRANCH=octopus TEST=adjust SSFC value of CBI to select RT5682 or DA7219 then check whether device tree is updated correspondingly by disabling unselected one. Signed-off-by: Marco Chen <marcochen@google.com> Change-Id: Id37c4c5716ade0851cfcb24e12b390841e633ac9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2021-01-08mb/google/asurada: Support audioTzung-Bi Shih
- Turns audio-related things power on. - Selects I2S pin-muxing. - Exposes GPIO "speaker enable" for switching on and off. BUG=b:176856418 Signed-off-by: Tzung-Bi Shih <tzungbi@chromium.org> Change-Id: If595657bbddad85bc9a154b3648bae1190cb00b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-08mb/google/dedede/var/sasuke: Add internal USB camera supportSeunghwan Kim
This change adds internal USB camera into devicetree for sasuke BUG=None TEST=Built and checked camera device existence with lsusb Change-Id: I51b9bb174205d984f1d060afd603f1d087095645 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49162 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/dedede/var/sasuke: Enable ELAN touchpadSeunghwan Kim
This change adds ELAN touchpad into devicetree for sasuke. BUG=None TEST=Built and verified touchpad function Change-Id: If9c25f23ee1c0e88382fff036f77a6753775b81e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/google/dedede/var/sasuke: Enable audio featureSeunghwan Kim
This change adds DA7219 audio codec and MAX98360A amplifier for sasuke. BUG=None TEST= Built and heared speaker sound on OS Change-Id: Ib48eb74fbfe171d46d0d23859057ba169b56bde2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/google/dedede/var/sasuke: Configure GPIO NC padsSeunghwan Kim
Configure GPIO NC pads for sasuke. BUG=b:172104731 TEST="FW_NAME=sasuke emerge-dedede coreboot" Change-Id: I3bf8f97708536010da82402ea3d49e387e732d61 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-08mb/google/volteer: Update copano device treehao_chou
Update device tree override to match schematics. BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I1fb006d750bb2d670885ec8ccc627436c5078072 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-08mb/google/volteer: Add GPIO to copano supporthao_chou
Add support for gpio driver for copano BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I1e0f730c9865ed77c7071245b071315a9c6ea4c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48951 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/volteer: Copano: Update SPD tablehao_chou
Add memory table to "mem_list_variant.txt", and command to generate files: go run ./util/spd_tools/lp4x/gen_part_id.go src/soc/intel/tigerlake/spd src/mainboard/google/volteer/variants/copano/memory/ src/mainboard/google/volteer/variants/copano/memory/mem_list_variant.txt DRAM Part Name ID to assign MT53D512M64D4NW-046 WT:F 0 (0000) H9HCNNNCRMBLPR-NEE 0 (0000) MT53D1G64D4NW-046 WT:A 1 (0001) H9HCNNNFBMBLPR-NEE 2 (0010) BUG=b:175896481 BRANCH=firmware-volteer-13672.B TEST=emerge-volteer coreboot Signed-off-by: hao_chou <hao_chou@pegatron.corp-partner.google.com> Change-Id: I2ace17e8fff12d3f5de15a35f609265d8b6ed6b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48948 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08mb/google/zork: Unmap FCH IO-APIC PCI interruptsRaul E Rangel
Now that the _PRT generates a GNB IO-APIC routing table we no longer need to route the PCI interrupts through the FCH IO-APIC. This change unmaps the IRQs since they are no longer used. BUG=b:170595019 TEST=Boot with `pci=nomsi amd_iommu=off` and verify /proc/interrupts Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3467934bfcac14311505bec49a12652490554e6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/48669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-08mb/google/dedede: Enable "FastPkgCRampDisable" upd for noise mitigationMaulik V Vaghela
As part of acoustic noise mitigation calibration, we need to enable FastPkgCRampDisable upd along with slew rate = 1. This values has been derived based on noise calibration done. Please refer document 575216 for procedure. BUG=None BRANCH=dedede TEST=correct value has been programmed and slew rate measurement is correct on scope. Change-Id: Ie42c8ab647ff42fa043b6f717a9834f9b9c551f6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Evan Green <evgreen@chromium.org>
2021-01-07mb/google/zork: Decrease stamp_boost parameter for dirinbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:175364713 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I44f086af6b5dd552efd2bd1ef4db0d69b652826d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-07mb/google/dedede: Add support for charger throttlingSumeet Pawnikar
Add charger current throttling support for dedede baseboard BUG=None BRANCH=None TEST=Built and tested on boten system Change-Id: I79edba579249111294a982590660196f05be7eaf Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49083 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/volteer/var/elemi: Tune i2c frequencyWisley Chen
Tuning i2c frequency for elemi I2C0: 396.6 KHz I2C1: 395.9 KHz I2C5: 397.1 KHz BUG=b:176794161 BRANCH=volteer TEST=emerge-voleteer coreboot, and measure i2c clock. Change-Id: I23b04a9b5ff8873d9de12e762e8e2786ef474ac0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-07mb/google/dedede/var/metaknight: update Goodix touch screen sequenceTim Chen
Update Goodix touch screen reset delay time to 180ms. BUG=b:176213670 TEST=Build and boot Metaknight to OS. Change-Id: I5801a36fb7c03b23046df16b1eaf4c548241bba5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/zork: Modify variant to Shuboz supportKane Chen
1. Add ELAN touchscreen/touchpad to overridetree.cb 2. Follow Dalboz setting to add variant.c BUG=b:174528384 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ic3193ca7957251841e75a7e5c7a16fc5047919fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/48001 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/lindar: Fix building with CONFIG_CHROMEOS unsetMatt DeVillier
Make CHROMEOS_DSM_CALIB depend on CHROMEOS, rather than force-select it. Change-Id: I4c3fd04ec00e0787381c58810938dd48f414635c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-07soc/intel/common/cse: Drop dependency on CHROMEOS for SOC_INTEL_CSE_LITE_SKUMatt DeVillier
The CSE lite SKU has 2 CSE firmware boot partitions vs 3 for the "normal" SKU; this has nothing to do with building for ChromeOS or not, and by having this dependency, boards with select the CSE lite SKU are unable to build with CONFIG_CHROMEOS unset due to Kconfig dependency issues. Test: build google/wyvern with CONFIG_CHROMEOS not set. Change-Id: I6959f35e1285b2fab7ea1f83a5ccfcb065c12397 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-07mb/google/puff/var/dooly: Config I2C0 SerialIoDevModeTony Huang
I2C0 has amplifier connection, thus set it to PchSerialIoPci. BUG=b:170273526 BRANCH=puff TEST=Build and check PCH serial IO config is set I2C0 to Mode 1 Change-Id: I9540f7b5538d37de53bcf43531488d714874a565 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2021-01-07mb/google/dedede/var/magolor: modify raydium touch screenRen Kuo
modify raydium touch screen power on timing to meet requirement BUG=b:174280232 TEST=build firmware and measured the timing Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I3ecc9d8e21f8c76e9e96cf050dcde83c3c4f4ea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48971 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-07mb/google/dedede/var/metaknight: Configure I2C high and low timesTim Chen
Configure the I2C bus high and low times for port0,2 and 4 I2C buses. BUG=b:176519792 TEST=Measured the I2C bus frequency lower than 400 KHz. Change-Id: Ieed038c93f0972c06cb3fa311742dd22ac2e875d Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/madoo: Update Goodix touchscreen power sequenceDtrain Hsu
Follow Goodix datasheet (GT7375 Programming Guide_Rev.0.1.pdf and GT7375P Programming Guide_Rev.0.6.pdf) to tune touchscreen power sequence. Increase reset_delay_ms from 120ms to 180ms. BUG=b:176511605 BRANCH=dedede TEST=Build and boot Madoo to OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iae35e4da31a3c3afd24c7daf81a5a3e762acd3b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-01-07mb/google/dedede/var/boten: Configure I2C high and low timeStanley Wu
Configure the I2C bus high and low time for all enabled I2C buses. BUG=b:168783630 TEST=Measured the I2C bus frequency reduce to 387 KHz. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I37403dd3ac3c9320398207d2111e1ddb73d6a130 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/lantis: Config I2C high and low time for touchscreen/audioTony Huang
Config I2C high / low time in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). These tuning value is applied from touchpad as a base line, and EE measured touchscreen/audio runs at 399/396.7kHz after tuning. BUG=b:173709409 BRANCH=dedede TEST=Build and check after tuning I2C clock is under 400kHz Change-Id: I970d69e6361d7cf6fcfc4e5b0b3c5fbfa885367c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/dedede/var/lantis: Config I2C high and low time for touchpadTony Huang
BUG=b:173709409 BRANCH=dedede TEST=EE measured result is 390.8kHZ Change-Id: I7a6475fd29d4c9f8efa78a42a112b5565511b939 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-01-07mb/google/zork/var/vilboz: Fix Goodix touchscreen power sequenceFrank Wu
According Goodix GT7375P Programming Guide_Rev.0.6, increase the stop delay time from 100 ms to 160 ms. The power sequence is not met with the latest guide_rev.0.6. BUG=b:176270381 BRANCH=zork TEST=Confirm the measured waveform complies with Goodix touchscreen spec. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I687ffa2eb13a9ddecb3045c5e1540b94417329ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/48907 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/broadwell: Move MAX_CPUS from mb to SoCFelix Singer
All Broadwell boards use 8 for MAX_CPUS, so this option can be factored out into SoC Kconfig. Change-Id: I311b95ea75a7c6b76b32c7197a0cec86db644234 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49122 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/skylake: Move MAX_CPUS from mb to SoCFelix Singer
Configure MAX_CPUS in SoC Kconfig with 8 as default value and remove it from every mainboard where 8 is used. Change-Id: I825625bf842e8cd22dada9a508a7176e5cc2ea57 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49105 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06mb/google/volteer/var/voema: Update Aux settings for Port 0David Wu
On Voema port 0 (MB PORT) does not have a retimer so the port needs to be configured for the SOC to handle Aux orientation flipping. BUG=b:176462544 TEST=tested on voema Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I3d31a5b848f56126f8ffe2babb29085471e8224f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2021-01-06mb/google/zork/mainboard: Remove unused pirq_dataRaul E Rangel
This table was wrong. It's also produced by the SoC code now. BUG=b:170595019 TEST=Verify PCI IRQ: log messages Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I008b6896064672f9d45a8e12f6cfc62c0cc41536 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-06cpu/intel/model_206ax: Rename `cX_acpower` optionsAngel Pons
They aren't specific to AC power operation anymore. Also adapt autoport. Change-Id: Ib04d0a08674b7d2773d440d39bd6dfbd4359e0fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49089 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 07:14:04 +0000