| Age | Commit message (Collapse) | Author |
|---|
|
As all variants have a touchscreen option, in baseboard table set the
enable GPIO high and hold in reset during romstage, then release reset
in ramstage. This will allow the touchscreen to make use of the runtime
I2C detect feature (enabled in a subsequent commit) so that an ACPI
device entry is created only for the touchscreen actually present.
Variants/SKUs which do not have a touchscreen (if any) can use the
romstage/ramstage GPIO override tables to set the associated enable/
reset GPIOs to NC.
This mirrors the change to skyrim in CB:67778.
BUG=b:121309055
TEST=build/boot guybrush with rest of patch series
Change-Id: I9b3356b8b3a0e68a307838a4b18775d25b32e548
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The patch sets the EPP to 50% (0x80) for Vell. With EPP at 50%, the Vell
system demonstrated better power improvement without sacrificing the
performance.
PLT Results(Perf) with EPP@40% and EPP@50%:
EPP@40%: Device1-656 mins, Device2-664 mins.
EPP@50%: Device1-678 mins, Device2-677 mins.
In short, with EPP@50%, PLT KPI ran for more than 13 to 22mins compared
to EPP@40%.
Branch=firmware-brya-14505.B
BUG=b:215526166
TEST=Verified code build for Vell board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I41b15b84025d25cf59dac2d85826a3de9d725bae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Only a subset of variants has proximity sensors.
This patch by itself does not introduce functional changes to any board.
It is mainly to ease migrating SX9324 from the legacy driver to the
linux one - allowing gradual migration variant by variant.
BUG=b:242662878
TEST=Dump ACPI SSDT then verify they are identical w/ and w/o this patch
Change-Id: Ic00e0d9eafcef2c9eaf32571fecf6190777cec36
Signed-off-by: Victor Ding <victording@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69191
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the marasov variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:254365935
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_MARASOV
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ibe2dc442480f6a73877b40625e228cdb2038aa4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69052
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The fingerprint(FP) feature is only for volmar,and it's not for zavala.
Add FPMCU_MASK field in fw_config to disable the FP function for
zavala, and reserve FP function for shipped volmar.
Define the value as following:
field FPMCU_MASK 10
option FPMCU_ENABLED 0
option FPMCU_DISABLED 1
end
BUG=b:250807253
TEST=build firmware and verify the fp function in volmar DUT.
write `disable=1` and 'enable=0' in FPCMU_MASK field.
check the fp function and run `ectool --name cros_fp version`
It works as expected.
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I867771904811459697056662d5e29c545a1a9474
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68917
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename so table more indicative of when GPIOs are set, and so it can
be used for more than just setting PCIe GPIOs. Will be used to set
touchscreen GPIOs as part of power sequencing in a subsequent commit.
Rename all variant tables and getter functions to match.
This mirrors the changes made for skyrim in CB:67810
Change-Id: I72e7febfb532262be7e4c14bf136e0d69c91301e
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Rename variant_pcie_gpio_table() to baseboard_pcie_gpio_table(), since
the GPIO table comes from the baseboard and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
This is similar to the change made for skyrim in CB:67809
Change-Id: I14c79fad04f18d874ce6ff7e572bb237445db8b1
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for moli board. Please refer Intel doc#723158 for
more information.
BUG=b:257373742
TEST=Verify the build for moli board
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I457d410501be996f0f29ec622e1829f1581c4970
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69193
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
|
|
VPD read depends on CONFIG(VPD), not CONFIG(CHROMEOS).
TEST=build/boot snappy, verify SKU set properly in SMBIOS
Change-Id: I8aa57f793bd04dbe31f3b49bbff23e05c96592a6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch enables the radio frequency interference mitigation for Rex.
BUG=b:248391777
TEST=Booted to OS on Rex board. Verified RFIM DSM is presented to kernel
through ACPI SSDT.
Change-Id: I22f9861452c2c222dd7a33bfeb02c63b026bf2f7
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update PsysPL2 and PsysPmax.
BUG=b:253542746
TEST=Make sure PsysPL2 and PsysPamx values set
properly (through debug output)
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I0ffad751e8a99b282a5d05563a60745ee09e892c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Fix fw_config probe for UFC and WFC.
BUG=b:255971791
TEST=Build Google Rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I5103e7da04004414d96f42057c105cf9fbf51b25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
update USB topology per the schematic design
BUG=b:246657849
TEST=FW_NAME=lisbon emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I2976028d3efa20e25deedb34ffb8b3bab43b5f5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Also sort includes.
Change-Id: Iccb7f28a2c913ae0983bf224a03610d7fdd13c68
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Override GPIO pad configuration based on the latest gaelin schematic.
BUG=b:249000573
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=emerge-brask coreboot
Change-Id: I649ac5131393008787cbb403fc64b914de23312b
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Disable ASPM on SD until b/245550573 is root-caused/fixed.
Logical_lane 1 on winterhold is EMMC device.
Disable ASPM for suspend issue.
BUG=b:249914847, b:245550573
TEST=emerge-skyrim coreboot chromeos-bootimage
and test on whiterun proto emmc sku with
suspend_stress_test -c 10
Change-Id: If080cdb517a3f22aa89c8053fb6bba9e931c6f76
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68940
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that coreboot performs the necessary power sequencing, switch
from using the 'probed' flag to 'detect' for all I2C touchscreens.
This alleviates ChromeOS from having to probe to see which
touchscreen model is actually present, prevents breaking ACPI spec
by generating device entries with status 'enabled and present'
which aren't actually present, and improves compatibility with
upstream Linux and Windows.
BUG=b:121309055
TEST=build/boot ChromeOS and Linux on skyrim, ensure touchscreen is
functional, and ACPI device entry generated for correct touchscreen
model.
Change-Id: Id9e3089decf0f94a1358929684ce248e52cbe41f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Leakage from the SPI CS line onto the FPMCU VDD rail was preventing
the FPMCU from fully shutting down on AP reset.
Instead of simply turning off the power rail, now ensure the CS
line is not driven high until late in coreboot.
This ensures it is completely off for the requisite minimum of 200ms
(now measured at approx 1100ms).
BUG=b:245953688
TEST=Confirmed FPMCU is still functional on Kohaku.
Confirmed FpRebootPowerCycle unit test now passes
BRANCH=Hatch
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I1e7e32f61c3ac1b3154d42821cc1dd4c5d3de303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68819
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Provide a variant_finalize() method and call to be invoked from
mainboard_ops.final
BUG=b:245953688
TEST=Hatch and variants build
BRANCH=Hatch
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I9253ed4be1b08d0c7f65526c9b26dbcd00ffccc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68821
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable SaGv support for lisbon
BUG=b:246657849
TEST=FW_NAME=lisbon emerge-brask coreboot
pass RMT verification
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ic7d3203bfe06973b023a38d1aa3d69cce5c3a60c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69013
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Support GL9763E as a eMMC boot disk
BUG=b:246657849
TEST=FW_NAME=lisbon emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ibe579a913225b5241412bbb1b8ea995a5102a3bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
BUG=b:246657849
TEST=FW_NAME=lisbon emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ief8ca9cf845156ac761556d0eb49edb65894c001
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add a new kingler follower 'voltorb'.
BUG=b:256737049
TEST=emerge-corsola coreboot
Signed-off-by: Mars Chen <chenxiangrui@huaqin.corp-partner.google.com>
Change-Id: Ic7175c38fcde76ab0360f62da161994ba2ee6a69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
To support an RPL SKU on gladios, gladios must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for gladios so that it will use the RPL
FSP headers for gladios.
BUG=b:239513596
BRANCH=None
TEST=FW_NAME=gladios emerge-brask intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ic30f7fe30eb0a3151cdf46fff609819056b2fbfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Select GOOGLE_SMBIOS_MAINBOARD_VERSION allows querying
board revision from the EC.
BUG=b:256723358
TEST=1. emerge-skyrim coreboot chromeos-bootimage
2. flash the image to the device and check board rev
by using command `dmidecode -t 1 | grep Version`
Change-Id: I97295083dbca1c285ef7359d86abac7315c654c9
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69087
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Rex board only uses TBT PCIe root ports 0 and 2. This change disables
rp1 and rp3 root ports.
BUG=b:254207628
TEST=Booted to OS and verified rp1 and rp3 root ports were disabled.
Change-Id: Ia5c1d657c0ad0482619d739f8949bc9168eac25b
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68854
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Disable Active Policy and remove fan setting to let ec control fan
indenpendently.
BUG=b:236294162
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Ie8851800d30ebf4d948d6eaadda2387c8afe52d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Assuming variants have a touchscreen by default, set the enable GPIO
high and hold in reset during romstage, then release reset in ramstage.
This will allow the touchscreen to make use of the runtime I2C detect
feature (enabled in a subsequent commit) so that an ACPI device entry
is created only for the touchscreen actually present.
Variants/SKUs which do not have a touchscreen (if any) can use the
romstage/ramstage GPIO override tables to set the associated enable/
reset GPIOs to NC.
BUG=b:121309055
TEST=build/boot skyrim with rest of patch series
Change-Id: Ic4d7ac8f951bb94da2216a24dc85a96275c9d449
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Fine tune I2C3 clock frequency under the 400 kHz. From 402.7 kHz to
382.9 kHz.
BUG=b:255505160
BRANCH=firmware-brya-14505.B
TEST=FW_NAME="skolas" emerge-brya coreboot chromeos-bootimage
measure by scope with skolas
Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Change-Id: Ib6c3f895751387256378964ec76be45a4fcbba4e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update touchscreen setting.
ELAN900C is the I2C over hid device with slave address 0x10.
MELF0410 is the pure I2C device with slave address 0x34.
The LCD team verification result is on b/251378772 comment#11.
BUG=b:251378772
TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is
functional.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I568346d2abc39d9427e49c3b21f38db0184b8b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Enable DPTC support for Winterhold
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I97c2d3ee29687cd8a9c459e90a45cef05ac4436b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Update H58G56BK7BX068 and H58G66BK7BX067 support
BRANCH=None
BUG=b:243337816
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I2aa6169c6e824318e738878f8cd19e76fcfd5713
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Since there is not too many low power requirement for moli and it is doing FSI firmware qual, so it is not critical to enable the SAGV and keep SAGV disable.
BUG=b:254600066
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I4115b35fed35b74a307b08f7a10ebced2309297f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68898
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
ELAN updated the datasheet of component 4599 (qualification 10511)
to version 0.6 (upload date: Oct 24, 2022), decreasing i2c delay
during power-on sequence from 300 ms to 150 ms.
BUG=b:232893949
TEST=Manually checked touchscreen works after reboot and suspend
(on kernel v5.10)
Signed-off-by: Paz Zcharya <pazz@google.com>
Change-Id: I17e1f7d419637f6dff4049484ce1836ad98017ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68868
Reviewed-by: Eran Mitrani <mitrani@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the
lisbon variant.
BUG=b:246657849
TEST=FW_NAME=lisbon emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I16be50258db2111d22f7465458873e92f44c7dac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
update devicetree setting per the schematic
BUG=b:246657849
TEST=emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I4268a5b43690a22bb703337fed84b83c45da4ad2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Based on latest schematic to update the gpio table.
BUG=b:246657849
TEST=FW_NAME=lisbon emerge-brask coreboot
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I531f9ca9f6902d3318e99dadb58a811a4686a6e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Expand the size of cbmem console buffer from default value 0x20000 to
0x80000. Verified by running "cbmem -l" in Chromium OS shell.
localhost ~ # cbmem -l
CBMEM table of contents:
NAME ID START LENGTH
0. FSP MEMORY 46535052 b97fe000 01000000
1. CONSOLE 434f4e53 b977e000 00080000
2. RW MCACHE 574d5346 b977d000 00000360
3. RO MCACHE 524d5346 b977c000 00000f20
4. FMAP 464d4150 b977b000 0000047c
5. TIME STAMP 54494d45 b977a000 00000910
6. VBOOT WORK 78007343 b9766000 00014000
7. RAMSTAGE 9a357a9e b9700000 00066000
8. ACPI BERT 42455254 b96fc000 00004000
9. CHROMEOS NVS 434e5653 b96fb000 00000f00
10. REFCODE 04efc0de b96ab000 00050000
11. MEM INFO 494d454d b96aa000 00000768
12. RAMOOPS 05430095 b95aa000 00100000
13. COREBOOT 43425442 b95a2000 00008000
14. ACPI 41435049 b957e000 00024000
15. TPM2 TCGLOG 54504d32 b956e000 00010000
16. SMBIOS 534d4254 b9566000 00008000
17. FSP RUNTIME 52505346 ba7febe0 00000004
18. POWER STATE 50535454 ba7feb80 00000060
19. ROMSTAGE 47545352 ba7feb60 00000004
20. EARLY DRAM USAGE 4544524d ba7feb40 00000008
21. ACPI GNVS 474e5653 ba7feb20 00000020
BUG=246268888
TEST=Skyrim
Change-Id: I79205f31b4cc3276c1c213a171a6bf7e18d73a1c
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The brask DDR4 is set to interleave, due to the limited number of
gaelin PCB layers and the traces need to be smooth,
we will use non-interleave for gaelin DDR4.
BUG=b:255399229, b:249000573
BRANCH=firmware-brya-14505.B
TEST=Build "emerge-brask coreboot" and pass MRC memory training
Change-Id: I34413343e3f7c283f49fbbdd277d9da39c09f9f8
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
This ports the changes to the way the fch_pic_routing and
fch_apic_routing arrays get populated from Mandolin to Guybrush, Skyrim
and Zork. This is a preparation to move the init_tables implementation
to the common AMD SoC code in a later patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie550238dfa0d4c7cebe849966d40fa0b1984a0f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Use the same fch_irq_map name in all mainboards using the Picasso,
Cezanne, Mendocino and Morgana instead of using a mainboard-specific
name.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I035cffb9c6c8afd6bd115831e8eed4a395e2a7fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
string.h defines the memset function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I286557d6ad83990bc101eaa930bde04345859c0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Enable GPP clk req disabling for disabled PCIe devices. If a clk req
line is enabled for a PCIe device that is not actually present and
enabled then the L1SS could get confused and cause issues with
suspending the SoC.
BUG=b:250009974
TEST=Ran on skyrim proto device, verified that clk reqs are set
appropriately
Change-Id: I6c840f2fa3f9358f58c0386134d23511ff880248
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68139
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of using magic constants for the fch_pic_routing and
fch_apic_routing array sizes, define FCH_IRQ_ROUTING_ENTRIES in the
common code headers and use this definition. This also allows to drop
the static assert for the array sizes. In the Stoneyridge mainboard code
the equivalent arrays are named mainboard_picr_data and
mainboard_intr_data; also use FCH_IRQ_ROUTING_ENTRIES as fixed array
size there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d7ee46bd013ce413189398a144e46ceac0c2a10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68818
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define the fch_irq_routing struct once in a common header file instead
of in every mainboard's code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I11d9000b6ed7529e4afd7f6e8a7332c390da6dab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68817
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable RO verification by GSC and CBFS verification.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled using
x86 verstage and PSP verstage.
Change-Id: Idd22a521a913705af0d2aca17acd1aa069a77f29
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP as kano is using a converged firmware image.
BUG=b:253337338
BRANCH=firmware-brya-14505.B
TEST=Cherry-pick Cq-Depends, then "FW_NAME=kano emerge-brya
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
disable hardware write protect and software write protect,
flash and boot kano in end-of-manufacturing mode to kernel.
Cq-Depend: chrome-internal:5046060, chromium:3967356
Change-Id: I75da3af530e0eafdc684f19ea0f6674f6dc10f01
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch moves DRIVERS_INTEL_USB4_RETIMER config from Meteor Lake
SoC to Rex mainboard to maintain the symmetry with previous
generation ChromeOS devices (Brya and Volteer).
BUG=none
TEST=Able to build and boot to Google/Rex with USB4 functionality
remaining intact.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I38360f6f1f2fcb4b0315de93c68f00d77e63003c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update devicetree based on the schematic_20221014.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Ia03962b0e01394ddcd4971cbe0172ef5bd913e15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68482
Reviewed-by: Chao Gui <chaogui@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Move the Raydium touchscreen to the baseboard devicetree. Since only the
liara variant uses a level IRQ as I2C devices are supposed to, all other
board variants still override this to use an edge IRQ which were added
as a workaround to make the touchscreen work on the other devices. Right
now it's unclear to me if that edge IRQ workaround was only needed
temporarily and can now be removed, so I'll keep it as it was for now.
If this turns out to be no longer needed on the other variants, the
overrides can be dropped in the future.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic621c1a5856e9e280a25b0668010a1ee5bbb61e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68770
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add eDP panel power-on sequences and initialize the display in the
ramstage.
eDP panel in MT8188 EVB: "IVO R140NWF5 RH".
Panel spec name: R140NWF5 RH Product Specification
Firmware display eDP panel logs:
configure_display: Starting display initialization
SINK DPCD version: 0x11
SINK SUPPORT SSC!
Extracted contents:
header: 00 ff ff ff ff ff ff 00
serial number: 26 cf 7d 05 00 00 00 00 00 1e
version: 01 04
basic params: 95 1f 11 78 0a
chroma info: 76 90 94 55 54 90 27 21 50 54
established: 00 00 00
standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
descriptor 1: 38 36 80 a0 70 38 20 40 18 30 3c 00 35 ae 10 00 00 19
descriptor 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
descriptor 3: 00 00 00 fe 00 49 6e 66 6f 56 69 73 69 6f 6e 0a 20 20
descriptor 4: 00 00 00 fe 00 52 31 34 30 4e 57 46 35 20 52 48 20 0a
extensions: 00
checksum: fb
Manufacturer: IVO Model 57d Serial Number 0
Made week 0 of 2020
EDID version: 1.4
BUG=b:244208960
TEST=see firmware display using eDP panel in MT8188 EVB.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I67e0699c976c6f85e69d40d77154420c983b715e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68490
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Always detecting the presence of the ELAN touchpad doesn't affect the
functionality, but allows dropping the override for all variants that
have multiple touchpad options.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id5d14eedd5d95dd0990ae56775daed9284c03717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This helps with deduplicating the identical parts of the variants'
devicetrees.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie050c4624327b904e8cb0959b40421339e43f825
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Pentium CPU will use 150W adaptor, this change revises PsysPL2 to 150W
based on fw_config.
BUG=b:253542746
TEST=Check CPU PsysPL2=150W in AP log with Pentium CPU.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I63b2a9d79454b20b60ba1317a8eebb3c10eff9d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
SaGv is enabled for all brya variants, so it should be harmless
to enable it for brask variants to save some power.
BUG=254374912
TEST=Build and boot to Chrome OS
Signed-off-by: Derek Huang <derekhuang@google.com>
Change-Id: Ib5d1e39b3f901606e2f1449e4ed40d53696562ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The touchscreen IRQ has been configured as LEVEL_LOW in skyrim projects.
Therefore, update the gpio.c to be consistent with the configuration.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Iccfe5b01f10899c43151762e4730a05990afa602
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
On nissa, the pre-x86 time is not part of the 1s firmware boot time
target. Including the pre-x86 timestamps causes confusion since the boot
time appears to be greater than 1s, so disable the Kconfig on nissa.
We're not doing any analysis or optimisation of the pre-x86 time on
nissa anyway, this work will start from MTL onwards. Also, the Kconfig
is already disabled on the brya firmware branch, so this will result in
the same behaviour as brya.
Before:
Total Time: 1,205,840
After:
Total Time: 995,300
BUG=b:239769532
TEST=Boot nivviks, check "1st timestamp" is the first timestamp.
Change-Id: I885071c9e0ff9c8fac9444b382567d38a19c3c15
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68553
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Not all kahlee variants use the RT5682 audio codec, so split the
baseboard audio ACPI into two parts and only include the asl for
the codec(s) actually needed for a given variant.
TEST=build/boot aleena, liara variants and verify no ACPI present
for RT5682 codec (which is not present on the boards).
Change-Id: Icb7df4f8e51495ad3cb40113cd00810fd27dcd00
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9755 support for frostflow
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I1db598c68687ed17fd9baa3567ab8fdd3e4fb6a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Initialize MT6315 for powering on big cores on MT8186T.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib1d71d4f1689ba1e7ea5f798503ef11eff423fff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68621
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add two new types for MDN DDI descriptor
BUG=b:228284940
TEST=Normal boot and S0i3 cycles
Signed-off-by: Jason Nien <finaljason@gmail.com>
Change-Id: I02793f032f9855dac202a5aca8666c26426d6cb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66847
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
Create the gladios variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:239513596
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_gladios
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: I3dc99d97d8e30d9641f56616222dd68e3a0d548d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We use the name of the APCB file repeatedly, so put it into a variable
so that it's easier to update.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I8684db2f7b2d68f0354e37bd8cdfc4f9cab44b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change is to skip sending the MBP HOB since coreboot doesn't
use it and also helps to reduce the boot time by ~40 ms.
Boot time data
Before:
* 955:returning from FspSiliconInit 1,656,985 (274,416)
After:
* 955:returning from FspSiliconInit 1,593,036 (233,286)
BUG=b:252410202
TEST=Verified that boot time is reduced by ~40 msec.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I0d4f66940529b8d38d9658c769feba8b5c9b715e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68418
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
We need to boot eMMC for modem calibration, there is not need for BIOS
to initialize NVMe anymore as the kernel will do so. Removing the pci
device from the device tree as a first step.
BUG=b:185426670, b:254281839
BRANCH=None
TEST=Boot after removing from the herobrine device tree.
Change-Id: I802dd1361bc56a24ab3d65e6782bc611b7b75ee3
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Configure GPIOs based on GPIO_20221014.xlsx of frostflow.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I02272801c85a7c30d24c834a840e026225956fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
H9JCNNNCP3MLYR-N6E 1 (0001)
MT62F2G32D8DR-031 WT:B 2 (0010)
H9JCNNNFA5MLYR-N6E 3 (0011)
BUG=b:250470704, b:247683159
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I34584092c938539c91d65501ebe34b00212b34d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Remove redundant touchscreen "ELAN6915".
BUG=b:254328657
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I8f90b071b053858cf720de5ac2a71031fe623d70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Craask does not have a SAR proximity sensor.
BUG=b:253387689
TEST=Dump ACPI SSDT and verify SX9324 related entries are not present.
Change-Id: Ia0e3eb6dba82594ca27040d6ab0197da6095f510
Signed-off-by: Victor Ding <victording@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68564
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Test: cbmem reports verb table loaded for codec #2
Change-Id: I4db044535c95ccd3e81a67bb5e58e6f04ee8d12f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Test: build/boot google/drallion with non-ChromeOS build, Tianocore
payload. Windows 10, Linux 5.10.x booted successfully
Change-Id: I6358b1d5c71eee065fed96b7bca31e37f30d3a8f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58405
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1c00322d2b22e1fafffd6ebd66f2df14bcedbd89
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68461
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add VBT data files, ensure secondary VBTs compiled in as needed,
select INTEL_GMA_HAVE_VBT.
TEST=build/boot lindar variant with FSP/GOP display init, edk2 payload
Change-Id: I81022670fabda7994e292d333c999b508e61b469
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add VBT data files, ensure secondary VBTs compiled in as needed,
select INTEL_GMA_HAVE_VBT.
TEST=build/boot drawcia, mangolor variants with FSP/GOP display
init and edk2 payload
Change-Id: I58a2ed59bd858ce772e92f6659d341036823b11a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The ISH build target used for nissa is called adl_ish_lite: CL:3925007,
and by default the binary is installed as
/lib/firmware/intel/adl_ish_lite.bin
We could change the installed name, but it's nicer to keep it consistent
with the build target, so change the name in coreboot instead.
BUG=b:234776154
TEST=Build and boot nirwen, check firmware name is updated in SSDT
Change-Id: I983a38d08e758cf5a12a3f91a601c7e57d42c0cb
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
1. Set the PL1, PL2 and PL4.
2. Set PsysPL2 and PsysPmax.
BUG=b:253380352 b:253542746
TEST=Compare the measured power from adapter with the value of 'psys'
from the command 'dump_intel_rapl_consumption'.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I0a7ff64689b39e7754e0aed2f6869881a682fc93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68437
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This change disables unused PCIE RP8 and CLKSRC4. Without this change
storo cannot enter into s0ix properly.
BUG=b:219376808
TEST=Built and verified in storo
Change-Id: I9867825ce53de72ef73920c153002bc3be4dbd2d
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Aamir Bohra <aamirbohra@google.com>
|
|
Remove the ACPI ALS device from the EC configuration for newer devices,
because some do not have light sensors, and those who do have their ALS
presented through the new EC sensor interface already.
Inspired from commit ("f13e2501525f ("UPSTREAM: mainboard/google/eve: Remove ACPI ALS device")
BUG=b:253967865
BRANCH=none
TEST=Boot a device and ensure that 'acpi-als' device is not present
in /sys/bus/iio/devices.
Change-Id: Ibcfa9e8c5a4679d557150998fd255789d3f8a272
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68493
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update SoC GPIO setting of camera according to beadrix schematics.
GPP_D13 : NC -> PLTRST (EN_PP2800_CAMERA)
BRANCH=dedede
BUG=b:247178737,b:244120730
TEST=on beadrix, validated by beadrix seconds_system_resume < 500 ms.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Id00cb85cdad900c03842ad69707966aa62410efd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Simon Yang <simon1.yang@intel.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
|
|
SAR-related Kconfigs are only used by ChromeOS, and should be guarded
properly as such (as most other boards do).
TEST=build glados w/o CONFIG_CHROMEOS, verify SAR-related Kconfigs not
selected.
Change-Id: Id8abf68ed2e9720b5580f7965208dbe36460af07
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68458
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SAR-related Kconfigs are only used by ChromeOS, and should be guarded
properly as such (as most other boards do).
TEST=build reef w/o CONFIG_CHROMEOS, verify SAR-related Kconfigs not
selected.
Change-Id: I4fe3092e620bcbc33b0411ea69e55154fc118aa4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68457
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SAR-related Kconfigs are only used by ChromeOS, and should be guarded
properly as such (as most other boards do).
TEST=build sarien w/o CONFIG_CHROMEOS, verify SAR-related Kconfigs not
selected.
Change-Id: I424033e087bc37c651a922273718fc229b720448
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68456
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add two memory parts and generate the associated DRAM part ID.
1) Hynix H58G66AK6BX070
2) Micron MT62F1G32D2DS-026 WT:B
BUG=b:251363645
TEST=none
Change-Id: Iceb31576533a5b29c5957170473152014fc7e9c8
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
When the GSC is ready for the next transaction, it triggers a
GSC_AP_INT_ODL (active low) pulse with 100us duration to notify the AP.
Currently the TPM IRQ is configured as EDGE_RISING. Changing it to
EDGE_FALLING would speed up each register access by 100us. On Kingler,
this saves 20ms for the boot time (0.93s -> 0.91s).
BUG=b:235185547
TEST=emerge-corsola coreboot
TEST=Kingler booted without TPM errors
BRANCH=none
Change-Id: Id282e0f35694bd151781845cbd5aa4b389a30ddc
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Allows brya boards to use coreboot-generated FMAP layout
when building for non-ChromeOS target.
TEST=build/boot brya/banshee with edk2 payload, non-ChromeOS build
Change-Id: I21c2247c034d9bdc49f66771a93abad542a1e1fa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allows dedede boards to use coreboot-generated FMAP layout
when building for non-ChromeOS target.
TEST=build/boot dedede with edk2 payload, non-ChromeOS build
Change-Id: Icb975455cde0d75a5af9130ba3e82a4fb0df5613
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:244620955
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ia6cb56e76bc4e245a32f29b19226fa4fae330c92
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
|
|
Add initial fw config as per config.star.
BUG=b:253199788, b:245158908, b:244113761, b:244012065
TEST=emerge-rex coreboot. Make sure that ACPI tables are equivalent
before and after this change with CBI.FW_CONFIG set to 0x1561.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I66f8b3e4ab414c03b8d63fdd31e0f3f424619340
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68220
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:253199788
TEST=Build and boot to Google/Rex.
Change-Id: Ib729c98a4d67aa46992fdccf592010b0313605a6
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66817
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When fw_config is unprovisioned, devicetree will disable all probed
devices. However, boot-critical devices such as storage devices need to
be enabled.
As a temporary workaround while adding devicetree support for this,
remove the fw_config probe for storage devices so that all storage
devices are always enabled. On eMMC SKUs, UFS and ISH will be disabled
by the PCI scan anyway. On UFS SKUs, eMMC is not disabled by the PCI
scan, but keeping it enabled should have no functional impact, only a
possible power impact.
BUG=b:251055188
TEST=On yaviks eMMC and UFS SKUs, boot to OS and
`suspend_stress_test -c 10`
Change-Id: I6b3a20f3c14d5e9aa8d71f6ca436b5a682310797
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68365
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1.Change the TPM I2C freqeuncy to 1 MHz for xivu.
2.Config same settings as the baseboard for I2C buses 1-5.
BUG=b:249953477
TEST=On xivu, all timing requirements in the spec are met.
Frequencies:
1. I2C0 (TPM): 974.3 Khz
2. I2C1 (TouchScreen); 375.5 Khz
3. I2C3 （Audio): 389.0 Khz
4. I2C5 (Touchpad): 388.5 Khz
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I33f712c14978b95f3a4da82d6f1f5fbae1283b17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
1. Add CHROMEOS_WIFI_SAR to include the SAR configs.
2. Add get_wifi_sar_cbfs_file_name() that return the wifi SAR
filename.
BUG=none
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia863eaa53c9456ae0e9f0e8914e0de497a32b53b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68393
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Disable the unused PCIe root ports that are disabled in the PCIe port
corresponding descriptor list passed to AGESA/binaryPI. This descriptor
list is in src/mainboard/google/kahlee/variants/baseboard/OemCustomize.c
and it only has B0D2F2 (gpp_bridge_1) and B0D2F4 (gpp_bridge_3) enabled.
Since the PCIe engines marked as unused in the port descriptor list
won't show up as PCI devices, don't enable those PCI devices in the
devicetree so that coreboot won't complain about static PCI devices not
being found on the PCI bus.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8378e343a2eb13de66171cf4f38d77ae3401016
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68382
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I63b1053d36b284ed95b015c0b4b26bdf8e162e67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68381
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since commit 60e9114c6210 ("include/device: ensure valid link/bus is
passed to mp_cpu_bus_init"), no dummy LAPIC device is required under the
CPU cluster device. Since the CPU cluster device is already present in
the Stoneyridge chipset devicetree, drop the whole CPU cluster part from
the mainboard's devicetrees.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8918c14be25ac9756926a9c6a2806a3dceced42a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68317
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch from gpio_configure_pads() to gpio_configure_pads_with_override()
so variants can override romstage GPIO defaults. Rename baseboard
function and add an weak empty override function to be used by variants.
Will be used for touchscreen power sequencing in a follow-on commit.
Change-Id: I45586237919cd07a171beac57f3510e26338f67f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Create the zombie variant of the herobrine reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:249180463
BRANCH=None
TEST=util/abuild/abuild -p none -t google/herobrine -x -a
make sure the build includes GOOGLE_ZOMBIE
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: Ifecf0a6323b20012defbf14bd16ce2f1f41f4714
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C5.
BUG=b:249031186
BRANCH=brya
TEST=TP function is normal from EE check.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I5e756b7d7e14cace24ef2dfbb323c840c867ae1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
BRANCH=none
BUG=b:234776154
TEST=build and boot Nirwen UFS, copy ISH firmware to host
file system /lib/firmware/intel/adln_ish.bin
check "dmesg |grep ish", it should show:
ish-loader: ISH firmware intel/adlnrvp_ish.bin loaded
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I89782b0b7dde1fca0130472a38628e72dfd5c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This patch enables PD Sync for Rex.
BUG=b:248775521
TEST=Able to boot Google/Rex with PD sync enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I749b5dea481c7546579e97f923f143dd17f831d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67819
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
