summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2020-06-14mb/google/hatch/vr/puff: Set up PL2 and PsysPL2Tim Chen
This patch adds correct PL2 baseline setting and PsysPL2 for different SKUs. There is no way to identify the barral jack power rating, the assumption is following that ships with the product: 1. i3/i5/i7: 90W BJ 2. Celeron/Pentium: 65W BJ For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the original settings as 90% of adapter rating for PsyspL2/PL4 and PL2 as min(PL2, 0.9n) where n is adapter rating power. BUG=b:143246320 TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct Change-Id: Ib16d4f65707801b430f06892ab45ecfa7551593f Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-06-14mb/google/fizz: add variant chipset display initJeff Chase
The Endeavour variant does not have a DisplayPort input so there's no need to wait for it. BUG=b:147830399 BRANCH=none TEST=boot endeavour; check coreboot logs Signed-off-by: Jeff Chase <jnchase@google.com> Change-Id: I30c7c47f19a61ce66c6c923864d80870d2761859 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2020-06-14mb/google/dedede: Enable early EC software syncMeera Ravindranath
BUG=none BRANCH=none TEST=Verify sysjump from EC console, EC sync in romstage in AP console and crossystem reflect ecfw_act as RW Change-Id: Ief96fe481c94acef3754881cf1f453699fbfa52e Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41396 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14mb/google/dedede: Select Recovery Cache Kconfig optionMeera Ravindranath
BUG=none BRANCH=none TEST=Boot WaddleDoo in recovery and populate the recovery MRC cache. The subsequent recovery boot should boot out of the stored recovery MRC cache and skip memory training. Change-Id: Ief86fe481c94abef3754881cf1f454699fbfa52e Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41162 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-14mb/google/hatch: Switch USB2 port1 and port3 on NoibatEdward O'Callaghan
Switch USB2 port1 and port3 for noibat due to circuit change. BUG=b:154585046,b:156429564 BRANCH=none TEST=none Change-Id: I711038624f3efe397be73c29a940b3e17802598f Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42296 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-13treewide: Add Kconfig variable MEMLAYOUT_LD_FILEFurquan Shaikh
This change defines a Kconfig variable MEMLAYOUT_LD_FILE which allows SoC/mainboard to provide a linker file for the platform. x86 already provides a default memlayout.ld under src/arch/x86. With this new Kconfig variable, it is possible for the SoC/mainboard code for x86 to provide a custom linker file as well. Makefile.inc is updated for all architectures to use this new Kconfig variable instead of assuming memlayout.ld files under a certain path. All non-x86 boards used memlayout.ld under mainboard directory. However, a lot of these boards were simply including the memlayout from SoC. So, this change also updates these mainboards and SoCs to define the Kconfig as required. BUG=b:155322763 TEST=Verified that abuild with --timeless option results in the same coreboot.rom image for all boards. Change-Id: I6a7f96643ed0519c93967ea2c3bcd881a5d6a4d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42292 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-13mb/google/zork: update DRAM SPD table for vilbozPaul Ma
Add DRAM support for vilboz: Hynix H5AN8G6NCJR-VKC # 0b0000 Hynix H5ANAG6NCMR-VKC # 0b0001 Samsung K4A8G165WC-BCWE # 0b0010 Hynix H5AN8G6NDJR-XNC # 0b0011 Micron MT40A512M16TB-062E-J # 0b0100 Samsung K4AAG165WA-BCWE # 0b0101 Micron MT40A1G16KD-062E-E # 0b0110 BUG=b:157523051 BRANCH=none TEST=build Change-Id: I251fd9cc7bc51bfdeaa577f7034da750e684dc99 Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-12mb/google/volteer/var/voxel: Add memory parts and generate DRAM IDsFurquan Shaikh
This change adds memory parts used by variant voxel to mem_list_variant.txt and generates DRAM IDs allocated to these parts. This variant is not yet supported by coreboot but DRAM IDs need to be generated for it. In the coming days, variant voxel will be added to coreboot. BUG=b:157732528 Change-Id: I8780beec987deb8fed11bb8f84275dcba4768514 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-06-12mb/google/volteer: Customize PCH VR settings for better Sx power savingsVenkata Krishna Nimmagadda
For Volteer mainboard, this patch set optimized values for PCH external VR settings and ext rail voltage/current, to achieve better power savings in sleep states. v1p05 and vnn power rails can be used as an alternative source by-passing vccin_aux during Sx. This by-pass feature, enables us to shutdown vccin_aux rail which is higher voltage rail compared to v1p05 and vnn. These both rails were disabled by default in FSP. Changes in this patch are: 1. v1p05 and vnn rails are enabled and enabled supported voltage types in S0i1, S0i2, S0i3, S3, S4, S5 states. They were disabled by default. 2. Icc Max for v1p05 changed to 500 mA from default 100 mA. 3. vnn rail's voltage is changed to 5 V from default 4.2 V. BUG=None BRANCH=None TEST="Build and boot volteer and check VR settings with Intel ITP-XDP debugger and verify approx 250 mW power savings in Sx" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: Ib46423872c956af9aaa92902fce552d5447237c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42223 Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-12mb/google/dedede: Add new variant botenPeichao Wang
Add initial support for boten variant board. BUG=b:158023819 BRANCH=None TEST=build Change-Id: I56fe901c6aec781fac217ab08f7583cc25788688 Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-06-12mb/google/hatch: Remove unused USB2 port from NoibatEdward O'Callaghan
This port isn't packed on the board, so remove from the devicetree. BUG=b:154585046,b:156429564 BRANCH=none TEST=none Change-Id: Ib4aee337f67453adcebff7e93e25db7a838e3b2d Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42269 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-12mb/google/puff: Update i2c[2] and i2c[3] rise and fall timesSam McNally
BRANCH=none BUG=b:158713330 TEST=Flashing the LSPCON firmware works Change-Id: Ib371f6954115145047c70cfd25262026cce087fd Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-06-11vc/amd/fsp/platform_descriptors: drop prefix from PCIe/DDI structsFelix Held
The picasso_ prefix on the fsp_pcie_descriptor and fsp_ddi_descriptor structs isn't needed, since this code is picasso-specific, so drop it. Change-Id: Ia6a0ddb411aa64becc3c23a876f2ea43cb68e028 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42252 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-11mb/google/dedede: Add new variant drawciaWisley Chen
Add initial support for drawcia BUG=b:158540280 BRANCH=None TEST=build Change-Id: Ic775bb2a93581e422379ca90127e3581bbf3c89e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-06-11mb/google/volteer: Update DPTF TSR2 sensor ID for volteerDeepika Punyamurtula
Update DPTF_TSR2_SENSOR_ID to 2. Fixes the issue where TSR1 and TSR2 have the same DPTF_TSR#_SENSOR_ID value causing them to report the same temperature under /sys/class/thermal and also swap TSR0 and TSR1 in DTRT to match physical sensor in volteer schematics BRANCH=None BUG=b:149722146 TEST=On volteer system check TSR1 and TSR2 temperatures, should report different values `cat /sys/class/thermal/thermal_zone[3,4]/temp` Also verify other TSRs using `cat /sys/class/thermal/thermal_zone*/temp` and `ectool tempsinfo all ; ectool temps all` Signed-off-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Change-Id: Idc5f35e4faf59b0ee726eb32a08eab4654fb342d Reviewed-on: https://review.coreboot.org/c/coreboot/+/42232 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10mb/google/hatch: drop VBOOT_LID_SWITCH from hatch baseboardMatt DeVillier
Selecting VBOOT_LID_SWITCH under BOARD_GOOGLE_BASEBOARD_HATCH creates a requirement for VBOOT, and prevents building in the non-vboot/non-ChromeOS case. As this symbol is already selected by CHROMEOS below, there's no need for the baseboard (and only one of the two) to select it, so don't. Change-Id: I060e82185997bce451648173dd97dd6a3d5d237f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-10mb/google/dedede/variants/waddledoo: Adjust I2Cs CLK to meet specJohn Su
After adjustment on waddledoo Touch Pad CLK: 392.9 KHz Touch Screen CLK: 387.4 KHz Audio CLK: 350.9 KHz BUG=b:151302522 BRANCH=master TEST=emerge-dedede coreboot chromeos-bootimage measure by scope with waddledoo. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Iec02a751f1effdbefbb2969db2fd57f27ecdd033 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42187 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10mb/google/zork: Set FMDFILE for zork familyFurquan Shaikh
This change sets FMDFILE for zork family so that coreboot builds pick up the right flash layout. BUG=b:155990176 Change-Id: Ia1673622ccd14a2ff7bde555ed33d5b51cf4272a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42106 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-10mb/google/dedede: Enable S0ix supportAamir Bohra
Change-Id: I4cadfe69e36f959b54e374800c32629a7481ea94 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-10mb/google/dedede: Add mainboard acpi support for GPIO PM configurationAamir Bohra
Setting the default values for GPIO community power management, causes issues in detecting TPM interrupts. So to avoid that GPIO PM has to be disabled in devicetree. But for S0ix it is needed. This patch implements a workaround in ASL code to enable GPIO PM on S0ix entry and disable it on S0ix exit. This patch adds the following three platform specific methods. 1. MS0X to enable power management features for GPIO communities on low power mode entry and disables it on exit. 2. MPTS to enable power management features for GPIO communities when preparing to sleep. 3. MWAK to disable power management features for GPIO communities on waking up. BUG=b:153847814 TEST=Verify S0ix is working. GPIO PM configuration is upadated on low power mode entry and exit. Change-Id: I7225b78ab2ac5bf17f93230cd85cd21e836d807d Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41502 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-09mb/google/volteer: move volteer-specific GPIOs to variant gpio.cNick Vaccaro
- Move the GPIOs that are likely to be volteer-specific (mostly peripherals) to reside in variants/volteer/gpio.c so that variants don't have to override too many GPIO settings. - Modify malefor's gpio.c to adjust for the changes to baseboard's gpio.c. - Remove unused GPP_C3 (USB4_SMB_SCL) and GPP_C4 (USB4_SMB_SCA) settings. - Remove unused GPP_D9, GPP_D10, GPP_D11, and GPP_D12 settings. - Remove unused GPP_E8 (SLP_S0IX), COEX, WWAN, and SNDW related settings for malefor. - Remove unused GPP_R4 (HDA_RST_L) setting. BUG=b:157597158 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot volteer SKU4 to kernel. Change-Id: Ib2f384f539d55a3a8d4a7608336ef22aca3d8c4f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-06-09mb/google/hatch/vr/puff: Set up PL2 and PsysPL2Gaggery Tsai
This patch adds correct PL2 baseline setting and PsysPL2 for different SKUs. There is no way to identify the barral jack power rating, the assumption is following that ships with the product: 1. i3/i5/i7: 90W BJ 2. Celeron/Pentium: 65W BJ For Type-C adapter, we don't have Pcritcial (10ms) data, keeps the original settings as 90% of adapter rating for PsyspL2/PL4 and PL2 as min(PL2, 0.9n) where n is adapter rating power. BUG=b:143246320 TEST=Run with U62 and Celeron CPU and ensure the PL2 settings are correct Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Change-Id: If7de614d58366158a566563990ee1ecc8c0110bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/41555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-06-09mb/google/poppy: Add retail namesAngel Pons
Taken from Chrome OS update information. Looks like nami encompasses many different devices, which would not fit in one line, so skip it. Change-Id: I53405cba269cbfc25bd4618777b946500f173e7e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-06-08mb/google/dedede: Default spk_en gpio to lowUsha P
The max98357a_platform_driver will turn on/off the speaker enable gpio based on use, so configure it low to save power. BUG=None TEST=Built dedede and tested speaker playback working. We are seeing a power saving of ~10mW. Change-Id: I070679457b06cb82633c1197b893a5d89c8b2cf0 Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-06-08mb/google/dedede: source soc_common_config from variants overridetreeMaulik V Vaghela
All variants are overriding soc_common_config, so source it from overridetree and remove entry from baseboard devicetree. Only keeping chipset lockdown config in baseboard which will be common across all the variants. BUG=None BRANCH=None TEST=Checked code compilation and lockdown config is applied to all variants Change-Id: I23714b721a6bb0bac785f046586790a98dc5b646 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2020-06-07acpi: Rename motherboard_fill_fadt() to mainboard_fill_fadt()Kyösti Mälkki
The prefix mainboard_ was used everywhere else. Change-Id: Ie576fd47301aa484cb1396e0c6f7260b7698af4d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-07soc/intel/baytrail,braswell,broadwell,quark: Select COMMON_FADTKyösti Mälkki
Some of the boards do not select SYSTEM_TYPE_LAPTOP or _CONVERTIBLE so their FADT preffered_pm_profile would change from PM_MOBILE without the added overrides here. Change-Id: I04b602b2c23fbd163fcd110a44ad25c6be07ab66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41920 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-07soc/intel/jasperlake: Add JSL PMC as 'hidden' PCI deviceTim Wawrzynczak
This change allows treating the PMC as a 'hidden' PCI device on Jasper Lake, so that the MMIO & I/O resources can be exposed as belonging to this device, instead of the system agent and LPC/eSPI. Change-Id: Ie07987c68388d03359c43f64a849dc6e3f94676e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-07mb,soc/intel: Rename acpi_fill_in_fadt() to acpi_fill_fadt()Kyösti Mälkki
Change-Id: I9025ca3b6b438e5f9a790076fc84460342362fc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41919 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/octopus/variants/garg: Add G2Touch touchscreen supportTony Huang
BUG=b:156564296 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I99b04fec88da481e21b7a05807a4f1edeb3a5bdf Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-06-06src: Remove unused '#include <cpu/x86/smm.h>'Elyes HAOUAS
Change-Id: I1632d03a7a73de3e3d3a83bf447480b0513873e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41685 Reviewed-by: David Guckian Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede/var/wheelie: Add memory parts and generate DRAM IDsFurquan Shaikh
This change adds memory parts used by variant wheelie to mem_list_variant.txt and generates DRAM IDs allocated to these parts. BUG=b:157862308 Change-Id: I53f6f5c832cd40068a6d4379ace849f6e8ad7a91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41990 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede: Drop .spd.hex files from spd/Furquan Shaikh
Now that dedede is moved to using the auto-generated SPDs, we no longer need the .spd.hex files in spd/ folder. Hence, this change drops the files. Change-Id: I026b3c61a2a88a7cd2c9842a26eb336324853add Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41882 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede: Switch to using auto-generated SPDsFurquan Shaikh
This change switches dedede and family to using auto-generated SPDs obtained using gen_spd.go and gen_part_id.go. Change-Id: I6fadae0abcfb6e50d3cc502098ace9b668667a51 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41881 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede: Drop selection of GENERIC_SPD_BINFurquan Shaikh
GENERIC_SPD_BIN assumes that the SPDs are all placed in mainboard and have .spd.hex as the suffix. Disable GENERIC_SPD_BIN for dedede as it already provides its own rules for SPD inclusion. In follow up changes, GENERIC_SPD_BIN can be re-enabled by updating gen_spd.go tool to use similar suffixes and allowing different paths to be provided for SPD by mainboard. Change-Id: If10144e0b2bd67884af69f60e5117e388a3ae5da Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42054 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede/var/waddledoo: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by waddledoo and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Part: NT6AP256T32AV-J2 Waddledoo started assigning DRAM part IDs from 1. So, this change fills in Nanya part as ID 0 (though it is currently unused). Change-Id: I3879c4f3ad942eb349b52aad397333f576599bbd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/dedede/var/wheelie: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by wheelie and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Change-Id: If307bfb1d376e32af08af4f020f9e125f6a415dd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/dedede/var/waddledee: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by waddledee and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Part: NT6AP256T32AV-J2 Byte# Current New Explanation 4 0x14 0x15 This part has only 1 die. Hence, density per die is 8Gb. 6 0x90 0x04 1 die in package and 2 channels per die. Manufacturer name bytes are set to 0. Change-Id: I7a68a29ca3632e22f3960c9fc44acf3ce4f87c9c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/volteer: Drop spd/ folders from variants/Furquan Shaikh
Now that volteer is moved to using the auto-generated SPDs, we no longer need the spd/ folder under each variant. Hence, this change drops the spd/ folders and the SPD files within them. BUG=b:156126658 Change-Id: Icb36adeb11fd68a84df5b225db32fb8d840a530f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41619 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer: Switch to using auto-generated SPDsFurquan Shaikh
This change switches volteer and family to using auto-generated SPDs obtained using gen_spd.go and gen_part_id.go. BUG=b:147321551,b:155423877 Change-Id: I9ed48f0b51714b072a0459d0b70b5417a49db54f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/volteer/var/volteer: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by volteer and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Part: K4UBE3D4AA-MGCL Byte# Current New Explanation 6 0xB5 0xB4 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. Part: H9HCNNNBKMMLXR-NEE Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: H9HCNNNFAMMLXR-NEE Byte# Current New Explanation 4 0x15 0x16 As per datasheet, density is 16Gb per logical channel. So value should be 0x16. 6 0xF9 0xB8 This device has 4 logical dies instead of 8. Also, signal loading is not used by MRC. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 20,21, 0x92,0x55, 0x12,0x29, As per datasheet, part supports CAS 22 0x00 0x15 latencies 6,10,16,22,26,32,36,40. So value should be 0x12,0x29,0x15. 24 0x8C 0x96 taa is .468ns * CAS-40 which results in byte 24 being 0x96 as per datasheet. 29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to 280ns in MTB units which is 0x08C0. 31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to 140ns in MTB units which is 0x04C0. 123 0x00 0xE2 Fine offset for taa. Expected value is 0xE2 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: MT53E1G32D2NP-046 WT:A Byte# Current New Explanation 4 0x15 0x16 As per datasheet, density is 16Gb per logical channel. So value should be 0x16. 5 0x21 0x29 As per datasheet, this part has 17row address bits and 10column address bits. This results in 0x29. 6 0xB5 0x94 This device has 2 logical dies. Also, MRC does not use signal loading. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 12 0x0A 0x02 As per datasheet, this is 1rank and 16-bit wide channel. So, value should be 0x02. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 29,30 0xC0,0x08 0xE0,0x0B As per datasheet, this corresponds to 380ns in MTB units which is 0x0BE0. 31,32 0x60,0x04 0xF0,0x05 As per datasheet, this corresponds to 190ns in MTB units which is 0x05F0. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:147321551,b:155423877 Change-Id: I3998b2cd91020130bacf371fce9b0d307304acbe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-06mb/google/volteer/var/halvor: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by halvor and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: H9HKNNNCRMBVAR-NEH Byte# Current New Explanation 4 0x16 0x15 As per datasheet, density is 8Gb per logical channel. So value should be 0x15. 6 0xB9 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 2 channels 2 dies. Hence, 0x94 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to 280ns in MTB units which is 0x08C0. 31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to 140ns in MTB units which is 0x0460. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: MT53E1G64D4SQ-046 WT:A Byte# Current New Explanation 5 0x21 0x29 As per datasheet, this part has 17row address bits and 10column address bits. This results in 0x29. 6 0xB9 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 2 channels, 2 dies. Hence, 0x94. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:147321551,b:155423877 Change-Id: I28b065a00380516d8686279a92ef68b9f17e2f65 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41616 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer/var/malefor: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by malefor and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Bits 1:0 set to 0. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:155239397,b:147321551 Change-Id: I8b8bdc55314f538aff4dd1944a0b745357744d8c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41615 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer/var/ripto: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by ripto and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Bits 1:0 set to 0. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:155239397,b:147321551 Change-Id: Ibb06443a5c7fd80915f66b806cdd7c3ae1275b05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41614 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede/board_info.c: Clean upElyes HAOUAS
Remove unused includes Change-Id: I7e8109870168db7f477f205a0b3020b7b2be5f5f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41541 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-05google/trogdor: Remove RO_FSG regionJulius Werner
We decided to store the FSG on eMMC instead of SPI flash, so we don't need this region anymore. Getting rid of it allows us to put more space into CBFS (to store hi-res bitmaps). Also grow VPD by some remaining amount to keep the FMAP alignment reasonable. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If73450b65718affae71b6ada70ded5c5f45cfb4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-06-04Revert "mb/google/zork: Increase RO section to 5MB"Raul E Rangel
This reverts commit fddd101904188193197be10c8eae04e76386299b. Reason for revert: With FSP compression and non serial FSP we now have enough space in RO. Original change's description: > mb/google/zork: Increase RO section to 5MB > > The current size is too small to fit all the depthcharge assets. > Increasing it to 5MB gives us 648k of free space. > > $ cbfstool /build/zork/firmware/image-trembyle.serial.bin print -r COREBOOT > FMAP REGION: COREBOOT > Name Offset Type Size Comp > cbfs master header 0x0 cbfs header 32 none > fallback/romstage 0x80 stage 524316 none > fallback/ramstage 0x80100 stage 96592 none > config 0x97ac0 raw 843 none > revision 0x97e80 raw 680 none > spd.bin 0x98180 spd 8192 none > etc/sdcard0 0x9a1c0 raw 8 none > locales 0x9a200 raw 141 LZMA (166 decompressed) > (empty) 0x9a300 null 3224 none > fspm.bin 0x9afc0 fsp 720896 none > (empty) 0x14b000 null 3992 none > fsps.bin 0x14bfc0 fsp 327680 none > pci1002,15d8,c1.rom 0x19c000 optionrom 54272 none > pci1002,15d8,c4.rom 0x1a9480 optionrom 54272 none > fallback/dsdt.aml 0x1b6900 raw 12727 none > locale_hi.bin 0x1b9b00 raw 10441 LZMA (239928 decompressed) > ... > locale_ko.bin 0x254f80 raw 11282 LZMA (231168 decompressed) > fallback/payload 0x257c00 simple elf 95169 none > (empty) 0x26f000 null 245656 none > apu/amdfw 0x2aafc0 raw 1277440 none > (empty) 0x3e2e00 null 688472 none > bootblock 0x48af80 bootblock 64 none > > BUG=b:130028876 > BRANCH=none > TEST=Built image with depthcharge and booted. > > Change-Id: I9cd2902404ef68cdbd4a9484d5cb1ee9cba3efd1 > Signed-off-by: Raul E Rangel <rrangel@chromium.org> > Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2042850 > Reviewed-by: Martin Roth <martinroth@google.com> BUG=b:130028876, b:150746858 BRANCH=none TEST=emerge-zork coreboot-zork chromeos-bootimage and boot trembyle localhost ~ # flashrom -p host -r /tmp/main.bin flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) Calibrating delay loop... OK. coreboot table found at 0xcbe54000. Reading flash... SUCCESS localhost ~ # futility dump_fmap /tmp/main.bin | grep WP_RO -B 3 area: 22 area_offset: 0x00c00000 area_size: 0x00400000 (4194304) area_name: WP_RO localhost ~ # flashrom -p host --wp-range 0xc00000 0x400000 --wp-enable flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) coreboot table found at 0xcbe54000. SUCCESS localhost ~ # flashrom -p host --wp-status flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) coreboot table found at 0xcbe54000. WP: status: 0x0094 WP: status.srp0: 1 WP: status.srp1: 0 WP: write protect is enabled. WP: write protect range: start=0x00c00000, len=0x00400000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5df10ee8e855adfaaf4b2fac4c2c47037ec093b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-04mb/google/volteer: Create voxel variantDavid Wu
Create the voxel variant of the volteer reference board BUG=b:157879197 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_VOXEL Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8ba5412be211730db84675927c500238cb20ff3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/41968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-06-04mb/google/zork: create new variant for VilbozPeichao Wang
BUG=b:157499341 BRANCH=NONE TEST=FW_NAME="vilboz" emerge-zork coreboot Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I28ab3edb130fc7bf8b786141bc088166052d4868 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41801 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03mb/google/zork: Add HID for max98357aRaul E Rangel
The default HID was removed by a1c82c5ebee. We need to explicitly specify it. BUG=b:154756391 TEST=No longer see ERROR: _HID required message in console Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0083f98aea55ba262ac44b0018c9c1d2e12d9f8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/42015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-03Makefile: Drop HAVE_SMI_HANDLER test for smm-classKyösti Mälkki
Change-Id: Id0bb5266246dbd959c6497d7c411f908cc49318c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-03mb/google/foster: Remove EC_GOOGLE_CHROMEEC stubsKyösti Mälkki
Board does not have ChromeEC. Change-Id: Id6ab2495d6e082fdcb71ec5162efde877d97ce22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-03mb/google/cyan,intel/strago: Remove EC_GOOGLE_CHROMEEC testsKyösti Mälkki
Boards have unconditional select EC_GOOGLE_CHROMEEC. Change-Id: Id444c83fc40f908d2257e8ec2606f149722a9bde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-03mb/google/zork: Delete sb_fch.aslRaul E Rangel
This file is not used. BUG=b:154756391 TEST=Build trembyle and check that peripherals still work Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I721e295546aa75c9745a4836425b6e3e0067afaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/41837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03mb/google/hatch: Enable the CSE Lite SKU for Puff variantsV Sowmya
This patch enables enables the CSE Lite SKU for all the puff variant boards. BUG=b:143229683 TEST=Build and boot puff with CSE Lite SKU. Cq-Depend: chrome-internal:3046770 Change-Id: I0de6bca162b01870ca554ae97bc4a41cf66fef18 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03mb/google/hatch: Modify the puff fmd files to support CSE Lite SKUV Sowmya
This patch modified the puff fmd files to support CSE Lite SKU. * Reduce the SI_ALL size to 3MiB since ME binary size is less than 2.5MiB. * Increase the FW_MAIN_A/B size to accommodate the ME_RW update binary with CSE Lite SKU. BUG=b:154561163 TEST=Build and boot puff with CSE Lite SKU. Cq-Depend: chrome-internal:3046770 Change-Id: I4d39a1bdeabf48fc740da67539f48a9ff72c442c Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41198 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03mb/google/volteer/halvor: initialize gpio setting and update overridetree.cbFrank Wu
Based on schematic and gpio table of halvor, generate gpio setting and overridetree.cb for halvor. BUG=b:153680359 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Verify that the image-halvor.bin is generated successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ic6bd018551be58945742d1a6e7f7c5560f218e40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03mb/google/deltaur: Change H1 I2C speed to FASTEric Lai
H1 is stable after HW rework. Connect +3.3V_ALW_PCH with +3.3V_PRIM. Therefore change I2C speed back to FAST. BUG=b:154885320 TEST=Check H1 I2C speed is 375kHz by scope. And no error message in cbmem and kernel log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If58721039d90514a17f024e6b432f3a5226440e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2020-06-02mb/google/volteer/ripto: Add audio devices to the treeDuncan Laurie
The ripto board is still being used for testing so make sure it supports the same audio config as volteer. BUG=b:147462631 TEST=build ripto variant Change-Id: Iabeb73307418dc16b12fa60ad26923cd9f6e1f3a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-06-02mb/google/volteer: Add firmware configuration probing for audioDuncan Laurie
For all of the audio devices in devicetree.cb add the probe matches that will determine if the device should be enabled or not based on the selected audio daughter board type. AUDIO=MAX98357_ALC5682I_I2S: enable max98357 and alc5628, disable others AUDIO=MAX98373_ALC5682I_I2S: enable max98373 and alc5682, disable others AUDIO=MAX98373_ALC5682_SNDW: enable soundwire devices, disable others BUG=b:147462631 TEST=test different device present in ACPI based on fw_config value: > AUDIO=NONE ectool cbi set 6 0x00000000 4 2 > AUDIO=MAX98357_ALC5682I_I2S ectool cbi set 6 0x00000100 4 2 > AUDIO=MAX98373_ALC5682I_I2S ectool cbi set 6 0x00000200 4 2 > AUDIO=MAX98373_ALC5682_SNDW ectool cbi set 6 0x00000300 4 2 Change-Id: I5492e8cddcff3ba01023b0daef02be3508d347b0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41216 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/google/volteer: Add firmware configuration tableDuncan Laurie
Add the current firmware configuration table for the volteer mainboard and define some actions based on probe results for audio: - When I2S options are selected disable the SoundWire GPIOs. - When SoundWire is enabled disable the I2S GPIOs. - When no audio is enabled disable all the GPIOs. BUG=b:147462631 TEST=Test that GPIOs are configured as expected based on the current value of the fw_config field in cbi. Change-Id: I179f8b6436be83a2b37911777764bd26a0d404b7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41215 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/google/volteer: Reorganize audio codecsDuncan Laurie
- Move all audio devices from baseboard to the volteer variant. - Add max98373 devices and enable the driver - Disable everything in FSP and let coreboot configure GPIOs. BUG=b:147462631 TEST=this change makes all audio devices show up in ACPI, so this was tested by ensuring that all audio devices are present in ACPI. Change-Id: Ic654ea52a549053622603aa8c81fb37577d4e011 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02mb/google/{daisy,veyron{_mickey,_rialto}}: Remove unused 'include <vbe.h>'Elyes HAOUAS
Change-Id: I7c0be437e8cb49934913563c6d21056034a50095 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41684 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02src: Remove duplicated includesElyes HAOUAS
Change-Id: If8c7e26ebd954b19bfb8766b26570c6865ad255e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41676 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02src: Remove unused 'include <bootstate.h>'Elyes HAOUAS
Change-Id: I54eda3d51ecda77309841e598f06eb9cea3babc1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-02src: Remove unused 'include <arch/smp/mpspec.h>'Elyes HAOUAS
Change-Id: If8048586e3693a8e6f63d9dc2800b073bab78628 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41669 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02src: Remove unused '#include <cpu/x86/lapic.h>'Elyes HAOUAS
Also, replace 'lapic.h' by 'lapic_def.h' in 'soc/intel/braswell/northcluster.c'. Change-Id: I71cff43d53660dc1e5a760ac3034bcf75f93c6e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41489 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02drivers/vpd: rename VPD_ANY to VPD_RO_THEN_RWJonathan Zhang
Rename VPD_ANY to VPD_RO_THEN_RW, to reflect the VPD region search preference. Update all existing code references for VPD_ANY. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I960688d1f6ab199768107ab73b8a7400a3fdf473 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41586 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/google/volteer: Enable TCSS DMA0 for VolteerJohn Zhao
This explicitly enables TCSS DMA0 controller and disables TBT PCIe2 and PCIE3 since they are unused on volteer. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I05cc9e3964d8037d433fca443be6e8d5b444bbce Reviewed-on: https://review.coreboot.org/c/coreboot/+/41387 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/google/dedede: Enable GBB configs for dededeUsha P
This patch enables the necessary GBB configs for dedede BUG=none BRANCH=none TEST=GBB Flag value was 0x39 before enabling the required flags and now it is updated to 0x40b9. Verfied from CPU log. Change-Id: Ica07c65d6cf23ea859de6aa8413377661547e47a Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
2020-06-02mb/google/dedede: Add SD card supportAamir Bohra
1. Configure SD card GPIOs. 2. Set SD card power polarity and card detect configs. SD card CMD. DATA and CLK GPIOs are set for native pad termination as per recommendation in EDS vol1 section 10.4.10 BUG=b:150872580 TEST=Verify SD card enumeration and read/write transactions. Change-Id: I90c8ceb85ada23718ff7b6fd7013317c818dd532 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02mb/google/dedede: Enable coreboot lock down configAamir Bohra
TEST=Build and boot waddledoo board Change-Id: Ic10af9a0d50946a98a5c4a77b492d242cef171ca Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41535 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-01src: Fix up #-commented SPDX headersAngel Pons
Delete leading empty comment lines. Change-Id: I8e14a0ad1e1e2227e4fb201f5d157f56f289f286 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-06-01mb/google/hatch: Add Noibat variantEdward O'Callaghan
A verbatim copy of variants/puff. BUG=b:156429564 BRANCH=none TEST=none Change-Id: I8c76d468177e1f3fcab53e0790599041b1a944d8 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41851 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-29mb/google/dedede: Enable Heci1 deviceAamir Bohra
Enable heci1 device from devicetree for PCI enumeration. This is required for ME status dump using HFSTSx resgisters in PCI config space. Heci1 device is later disabled through heci disable flow. TEST=Build, boot waddledoo. ME status dump is seen in console logs. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: Icb77db3f0666c2d14ebef2c3214564346d1fd3c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-29mb/google/dedede: add new SPD SPD_LPDDR4X_200b_4Gb_3733_DDP_1x16Marco Chen
The first DRAM part supported by SPD_LPDDR4X_200b_4Gb_3733_DDP_1x16 is NT6AP256T32AV-J2 so the SPD content is generally extracted from it's SPD. On the other hand, SPD bytes 4 / 6 / 13 were amended to follow SoC's requirement. BUG=b:152277273 BRANCH=None TEST=build the image successfully. Change-Id: If6fb0855a961d1c68315a727466bf45569cf2597 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41813 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-29mb/google/hatch: Select the fmd files for puff baseboardV Sowmya
This patch selects the fmd files based on config BOARD_GOOGLE_BASEBOARD_PUFF and also renames the files to align with basebaord name and layout size. BUG=b:154561163 TEST=Built puff and verified that it selects the right fmd file. Change-Id: Ice6196ca778c6c118ce89e1510a445339a5c3455 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-29mb/google/hatch: Select the fmd files for hatch baseboardV Sowmya
This patch selects the fmd files based on config BOARD_GOOGLE_BASEBOARD_HATCH and also renames them to add the baseboard name and layout size tags. BUG=b:154561163 TEST=Built hatch variants and verified that they select the right fmd files. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I5d99ae28cc972ffa635adf100b756c36e168a8f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-29mb/google/hatch: Select BOARD_ROMSIZE_KB_16384 by defaultFurquan Shaikh
All hatch and puff variants use 16MiB SPI flash except the legacy ones which used 32MiB flash. Kconfig.name is updated to select BOARD_ROMSIZE_KB_32768 only for the legacy variants and BOARD_GOOGLE_HATCH_COMMON selects BOARD_ROMSIZE_KB_16384 by default if BOARD_ROMSIZE_KB_32768 is not selected. TEST=Verified using abuild --timeless that all hatch variants generate the same coreboot.rom image with and without this change. Change-Id: I708506182966936ea38562db8b0325470e34c908 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41662 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-29Puff: Disable EFS1 for variantsDaisuke Nojiri
VBOOT_EC_EFS is for EFS1 and EFS1 is deprecated. Puff uses EFS2 and its variants should follow. BUG=b:157372086 BRANCH=none TEST=emerge-puff coreboot Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I581f137b506a96df45e5bed21833856bb4f6aaa3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-28mb/google/volteer: Add PMC.MUX.CONx devices to devicetree for VolteerTim Wawrzynczak
Volteer's MUX connections are known, and can now be described in ACPI tables. Port 1 has the only oddity, with SBU lines staying fixed in the CC1 orientation. TEST=Dump SSDT tables on Volteer, and confirm (coalesced for brevity): Scope (\_SB.PCI0.PMC) { Device (MUX) { Name (_HID, "INTC105C") Device (CON0) { Name (_ADR, 0) Name (_DSD, Package() { Package () { "usb2-port-number", 9 }, Package () { "usb3-port-number", 1 }, }) } Device (CON1) { Name (_ADR, 1) Name (_DSD, Package() { Package () { "usb2-port-number", 4 }, Package () { "usb3-port-number", 2 }, Package () { "sbu-orientation", "normal" }, ... } } } Change-Id: Id361b2df07e87ad72b6a59a686977b3f424e8ecf Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-28mb/google/dragonegg: remove abandoned projectAaron Durbin
Dragonegg is no longer in development nor used. Remove it. Change-Id: Ida30dba662bc517671824f8b70b73b4856836e97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28mb/google/zork/berknip: Replace full GPL header with SPDX linePatrick Georgi
Change-Id: I858f870db0babcb51c594570e8136436ecbb0d1d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41823 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28Revert "Revert "mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 ↵Furquan Shaikh
ports"" This reverts commit 1726fa1f0ce474cde32e8b32be34a212aff3ffba. Reason for revert: Resource allocator is split into old(v3) and new(v4). So, this change to enable hotplug resource allocator for volteer can land back. BUG=b:149186922 Change-Id: Ib6a4df610b045fbc885c70bff3698a032b79f770 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-28Remove new additions of "this file is part of" linesElyes HAOUAS
Change-Id: I6c69dcad82ee217ed4760dea1792dd1a6612cd8b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-28mb/google/volteer: Create terrador variantDavid Wu
Create the terrador variant of the volteer reference board BUG=b:156435028 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TERRADOR Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I088861d1f8b7b4ee8de1e5ab6c7d3109ffd0531b Reviewed-on: https://review.coreboot.org/c/coreboot/+/41718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-05-28mb/google/deltaur: Remove devicetree chip drivers/netKyösti Mälkki
Change-Id: Ia56305e9554b666f8eaf590a91be84e5cac4c75c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41701 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28mb/google/hatch: Drop rt8168 Kconfigs for baseboard hatchFurquan Shaikh
This change drops rt8168 ethernet Kconfig options for baseboard hatch since it does not really support an ethernet device. Change-Id: I7c19dbeb2f64b0643b082a9c588f8b14db4dfb8a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41661 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28mb/google/hatch: Split Kconfigs into BASEBOARD_HATCH and BASEBOARD_PUFFFurquan Shaikh
mb/google/hatch supports two different reference platforms - Hatch and Puff. This change adds Kconfigs BOARD_GOOGLE_BASEBOARD_PUFF in addition to BOARD_GOOGLE_BASEBOARD_HATCH to better organize the Kconfig selections and reduce redundancy. In addition to this, a new config BOARD_GOOGLE_HATCH_COMMON is added that selects all the common configs for both baseboards. TEST=Verified using abuild --timeless option that all hatch variants generate the same coreboot.rom image with and without this change. Change-Id: I46f8b2ed924c10228fa55e5168bf4fe6b41ec36c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41660 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28mb/google/volteer: Select SX9310 driver in KconfigDuncan Laurie
There are SX9310 devices present in devicetree.cb but the driver is not enabled so it is not getting used. Change-Id: I625233013a2e14eaf758e56027774fbf5df3bc83 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41700 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28mb/google/dedede: Enable Intel Speed Shift TechnologyKarthikeyan Ramasubramanian
Enable Intel Speed Shift Technology (ISST) by default. Disable ISST in waddledee and waddledoo variants on early phases. BUG=b:151281860 TEST=Build and boot the mainboard. Ensure that cpufreq driver to configure P-states is enabled in kernel on boards where board version is provisioned. Change-Id: Id65d7981501c2f282e564bfc140f8d499d5713e8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-05-27mb/google/zork: Add Picasso based Zork mainboard and variantsRaul E Rangel
This is a copy of the mb/google/zork directory from the chromiumos coreboot-zork branch. This was from commit 29308ac8606. See https://chromium.googlesource.com/chromiumos/third_party/coreboot/+/29308ac8606/src/mainboard/google/zork Changes: * Minor changes to make the board build. * Add bootblock.c. * Modify romstage.c * Removed the FSP_X configs from zork/Kconfig since they should be set in picasso/Kconfig. picasso/Kconfig doesn't currently define the binaries since they haven't been published. To get a working build a custom config that sets FSP_X_FILE is required. BUG=b:157140753 TEST=Build trembyle and boot to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3933fa54e3f603985a0818852a1c77d8e248484f Reviewed-on: https://review.coreboot.org/c/coreboot/+/41581 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26mb/google/nightfury: Enable max98390 ampSeunghwan Kim
This change enables max98390 audio codec on nightfury. BUG=b:149443429 BRANCH=firmware-hatch-12672.B TEST=Built and checked audio function on nightfury Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: Ic9678583370cf5e41c87e35ba12f86572708fada Reviewed-on: https://review.coreboot.org/c/coreboot/+/41127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-26mb/google/deltaur: Update audio verb table for jack detectionJairaj Arava
Additional verb changes are needed for Headset and Mic detection to work properly. BUG=b:155360937 TEST=Headset and Mic detection is working in the UI audio tray Change-Id: I184a05949f5522e929969156b72629be3d957e3f Signed-off-by: Jairaj Arava <jairaj.arava@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41642 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26mb/google/volteer: fix some white space nitsNick Vaccaro
Convert spaces to tabs in volteer variant makefiles, and remove empty comment lines from file headers. BUG=none TEST="emerge-volteer coreboot chromeos-bootimage", flash and verify volteer boots to kernel. Change-Id: I6c818c3adcc55ce89707efff6dd9a6bce512daa5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41587 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26soc/intel/tigerlake: Remove MIPI clock setting from devicetreeSrinidhi N Kaushik
In Tiger Lake we have support for enabling MIPI clocks at runtime in ACPI. Hence remove setting pch_islclk from devcietree and chip.h. Also update functions which reference pch_isclk. BUG=b:148884060 Branch=None Test=build and boot volteer and verify camera functionality Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I6b3399172c43b4afa4267873ddd8ccf8d417ca16 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41570 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26apollolake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Apollo Lake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on octopus system Change-Id: I609744d165a53c8f91e42a67da1b972de00076a5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41233 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26mb/google/volteer: Enable D3HotEnable and D3ColdEnable for VolteerJohn Zhao
This explicitly enables both of TCSS D3HotEnable and D3ColdEnable from Volteer devicetree.cb setting. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I1a168ad87169c0f6633704c55c9293aa25710188 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-26Mushu: Enable PCIe 1d.4 to enable dgpuShelley Chen
BUG=b:147249494,b:147249494 BRANCH=None TEST=boot up mushu check cbmem -1 to make sure PCIe 1d.4 is enabled Change-Id: I36404217f0ecffb0cce1105e76f507c9062df053 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-26mb/google/volteer: Enable ELAN trackpad wake suspend functionWilliam Wei
BUG=b:156990317 TEST=emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the ELAN trackpad can wake up unit from suspend. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: If4bea8a9742f7533be2e51b855cc39ca77d73608 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 22:17:01 +0000