Age | Commit message (Expand) | Author |
2020-08-06 | mb/google/zork: Configure GPIO_89 as PAD_NC | Furquan Shaikh |
2020-08-06 | mb/google/zork: Add touchscreen power control | Furquan Shaikh |
2020-08-06 | mb/google/zork: Switch USI_RESET to active low polarity for v3.6+ | Furquan Shaikh |
2020-08-06 | mb/google/zork: Use dev_nested_path for dmic gpio update | Josie Nordrum |
2020-08-06 | mb/google/zork: Make SW changes for HP_INT_ODL in schematic v3.6 | Josie Nordrum |
2020-08-06 | mb/google/zork: Add kconfigs to check schematic version 3.6 | Josie Nordrum |
2020-08-06 | mb/google/volteer: add support for ddr4 memory | Nick Vaccaro |
2020-08-06 | mainboard/google/puff: Remove second temp sensor | Andrew McRae |
2020-08-06 | mb/google/kukui: Add ddr geometry to support 6GB, 8GB DDR bootup | Huayang Duan |
2020-08-06 | mb/google/kukui: Add a new config 'Fennel' | xiatao5 |
2020-08-05 | mb/google/volteer/var/voxel: Add Raydium touchscreen support | David Wu |
2020-08-05 | mb/google/vilboz: update telemetry settings for vilboz | Peichao Wang |
2020-08-05 | mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI node | Lucas Chen |
2020-08-05 | src: Use space after 'if', 'for' | Elyes HAOUAS |
2020-08-05 | baytrail mainboards: Clean up mainboard.c | Arthur Heymans |
2020-08-05 | mb/google/zork: update DRAM SPD table for dirinboz | Kevin Chiu |
2020-08-04 | mb/google/zork/var/vilboz: Enable support for garaged stylus | Furquan Shaikh |
2020-08-04 | soc/intel/baytrail: Factor out `acpi_fill_madt()` | Angel Pons |
2020-08-04 | mb/**/{devicetree,overridetree}.cb: Indent with tabs | Angel Pons |
2020-08-03 | mb/google/zork: Pass oscout system clk to rt5682 | Akshu Agrawal |
2020-08-03 | mb/google/dedede: Update CPU critical temperature | Sumeet R Pawnikar |
2020-08-03 | mb/google/kukui: Add Micron 8GB discrete LPDDR4X DDR support | Huayang Duan |
2020-08-03 | mb/google/dedede/var/madoo: Add discrete WiFi configuration | Dtrain Hsu |
2020-08-03 | mb/google/dedede/var/madoo: Support Elan touchpad and configure I2C ports | Dtrain Hsu |
2020-08-03 | mb/google/dedede/var/madoo: Enable Goodix touchscreen | Ian Feng |
2020-08-03 | mb/google/volteer: Change wake to be triggered on a raising edge | Alex Levin |
2020-08-03 | mb/google/kukui: indent config names for burnet and esche | Hung-Te Lin |
2020-08-03 | mb/google/volteer/var/todor: Support ELAN i2c-hid touchpad | David Wu |
2020-08-03 | mb/google/zork: Add Samsung K4AAG165WA-BCTD SPD | Kevin Chiu |
2020-07-30 | mb/amd,google/mandolin,zork: Set EFS SPI platform config | Matt Papageorge |
2020-07-30 | mb/google/zork: remove indirection for dxio lane configuration | Aaron Durbin |
2020-07-30 | mb/google/zork/var/ezkinil: Configure boot media for new SKUs | Lucas Chen |
2020-07-30 | mb/google/zork: add USB over-current pin mapping to devicetree | Felix Held |
2020-07-30 | mb/google/dedede: Add Goodix touchscreen | Evan Green |
2020-07-29 | mb/google/volteer: Update TCSS D3Hot and D3Cold configuration | John Zhao |
2020-07-29 | soc/intel/skylake: Enable HDA depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable eMMC depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable TraceHub depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable SMBus depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable LAN depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable SATA depending on devicetree configuration | Felix Singer |
2020-07-29 | mb/google/zork: update stapm parameter for berknip | Kevin Chiu |
2020-07-29 | mb/google/dedede/var/magalor: Generate SPD ID for supported parts | Karthikeyan Ramasubramanian |
2020-07-28 | mb/google/zork: Add Bluetooth reset gpios to devicetree | Rob Barnes |
2020-07-28 | mb/google/dedede/var/madoo: Generate SPD ID for supported parts | Dtrain Hsu |
2020-07-28 | mb/google/dedede/var/madoo: Add audio support (ALC5682, MX98360A) | Dtrain Hsu |
2020-07-28 | mb/google/dedede/var/madoo: Configure USB port setting for Madoo | Dtrain Hsu |
2020-07-28 | mb/google/dedede/var/madoo: Configure GPIO for Madoo | Dtrain Hsu |
2020-07-28 | mb/google/volteer/var/voxel: Add memory configuration | Sheng-Liang Pan |
2020-07-28 | mb/google/volteer/var/volteer: I2C5 trackpad bus freq 400 kHz | Johnny Li |
2020-07-28 | mb/google/volteer2: Add support for passive USB-C daughterboard | Caveh Jalali |
2020-07-28 | mb/google/dedede/var/waddledee: Add discrete WiFi configuration | Karthikeyan Ramasubramanian |
2020-07-28 | mb/google/volteer: sync'ing todor with terrador | YH Lin |
2020-07-28 | mb/google/volteer: Create todor variant | YH Lin |
2020-07-28 | broadwell: Factor out PIRQ routing from devicetree | Angel Pons |
2020-07-28 | lynxpoint: Factor out PIRQ routing from devicetree | Angel Pons |
2020-07-28 | volteer: Create eldrid variant | MiceLin |
2020-07-27 | mb/google/hatch: Add smart battery I2C passthrough for Dratini | Tim Wawrzynczak |
2020-07-27 | mb/google/kukui: Add discrete LPDDR4X DDR table support for burnet/esche | Kevin Chiu |
2020-07-27 | mb/google/volteer: Add gpio-keys ACPI node for PENH | Alex Levin |
2020-07-27 | mb/google/volteer: Modify Delbin variant | Kane Chen |
2020-07-27 | mb/google/dedede: Remove Rcomp resistor and target values | Meera Ravindranath |
2020-07-27 | dedede: Create magolor variant | Ren Kuo |
2020-07-26 | mb/*/*/devicetree.cb: Normalize disabled PIRQ values | Angel Pons |
2020-07-26 | mb/google/volteer/var/terrador: Support ELAN i2c-hid touchpad | David Wu |
2020-07-26 | mb/google/kukui: send SKU ID to EC for device-specific configuration | Hung-Te Lin |
2020-07-26 | mb/mainboard/dedede: update GPIO table for Boten | yan.liu |
2020-07-26 | mb/google/dedede: Change HDMI DDC GPIOs to native function | Maulik V Vaghela |
2020-07-26 | mb/google/vilboz: Tune I2C bus 3 clock | peichao.wang |
2020-07-26 | src: Remove unneeded space in license header | Elyes HAOUAS |
2020-07-26 | mb/google/dedede/var/drawcia: Add G2Touch touchscreen support | Wisley Chen |
2020-07-26 | src: Remove extra lines in license header | Elyes HAOUAS |
2020-07-26 | */mb/google/volteer/**/gpio.h: Fix up license header | Angel Pons |
2020-07-26 | skylake boards: Factor out copy-pasted PIRQ routes | Angel Pons |
2020-07-26 | mb/google/zork: remove ACPI_FADT_RESET_REGISTER from fadt_flags | Felix Held |
2020-07-26 | amd/picasso: rework USB2 PHY tune parameter handling | Felix Held |
2020-07-25 | soc/amd/picasso: don't apply unconfigured USB2 PHY tune parameters | Felix Held |
2020-07-25 | soc/intel/tigerlake: Set power limits for Tiger Lake Y-SKU | Sumeet R Pawnikar |
2020-07-24 | mb/google/volteer: Remove unused dptf.asl files | Tim Wawrzynczak |
2020-07-24 | mb/google/octopus/variants/garg: update Garfour SKU ID | Tony Huang |
2020-07-23 | mb/google/zork: Don't expose reset GPIO for touchscreen to OS | Raul E Rangel |
2020-07-23 | mb/google/zork/variants/dalboz: Use HS200 for eMMC | Eric Peers |
2020-07-23 | zork: Create dirinboz variant | Kevin Chiu |
2020-07-23 | mb/google/arcada: Enable bayhub 720 on Arcada | Mark Hsieh |
2020-07-23 | mb/google/sarien: Enable bayhub 720 on Sarien | Ivy Jian |
2020-07-23 | mb/google/dedede/var/waddledoo: Configure stop delay for SiS TS | Karthikeyan Ramasubramanian |
2020-07-23 | mb/google/dedede/var/drawcia: Generate SPD ID for supported parts | Karthikeyan Ramasubramanian |
2020-07-23 | mb/google/zork: Fix Goodix touchscreen ACPI node | Furquan Shaikh |
2020-07-23 | mb/google/zork/var/morphius: Change hid and desc for Goodix touchscreen | Furquan Shaikh |
2020-07-23 | mb/google/zork: Drop TODO for GPIO_91 | Furquan Shaikh |
2020-07-23 | mb/google/zork: Configure all pads in ramstage for dalboz reference | Furquan Shaikh |
2020-07-23 | mb/google/zork: Configure all pads in ramstage for trembyle reference | Furquan Shaikh |
2020-07-23 | mb/google/zork: Remove unnecessary PULL_UP from early_gpio_table | Furquan Shaikh |
2020-07-23 | amd/picasso: rename PCIe descriptor to DXIO descriptor | Felix Held |
2020-07-23 | vc/amd/fsp/picasso: add logical to lane number in port descriptor struct | Felix Held |
2020-07-23 | mb/google/kukui: Add new configs 'esche' and 'burnet' | Kevin Chiu |
2020-07-23 | mb/google/dedede: Enable the CSE Lite SKU for dedede | V Sowmya |
2020-07-23 | mb/google/dedede: Skip the CPU replacement check for dedede | V Sowmya |
2020-07-22 | mb/google/zork: Modify Woomax variant | Kane Chen |
2020-07-22 | mb/google/kukui: revise config structure for Jacuzzi followers | Hung-Te Lin |