Age | Commit message (Expand) | Author |
2020-11-30 | mb/google/volteer/variants/delbin: Enhance I2C5 bus freq closer 400 kHz | Frank Chu |
2020-11-30 | mb/google/volteer/variant/copano: Add memory part support | Nick Vaccaro |
2020-11-29 | mb/google/volteer: eldrid: use devtree aliases for PMC MUX connectors | Scott Chao |
2020-11-25 | mb/google/volteer: Update Eldrid USB2 port settings in overridetree | Nick Chen |
2020-11-25 | mb/google/volteer/variant/lindar: change speaker smart amplifier to ALC1011 | Stanley Wu |
2020-11-25 | mb/google/volteer/var/elemi: Add H5ANAG6NCJR-XNC | Wisley Chen |
2020-11-24 | mb/google/volteer/var/voxel: Update DPTF parameters | Sheng-Liang Pan |
2020-11-24 | mb/google/volteer: fw_config: Add setting for new sd readers | Zhuohao Lee |
2020-11-22 | mb/google/volteer: Remove unused devices for terrador and todor | David Wu |
2020-11-22 | mb/google/volteer/var/voema: Update gpio and devicetree settings | David Wu |
2020-11-20 | mb/google/volteer/var/elemi: Update gpio | Wisley Chen |
2020-11-20 | mb/google/volteer/var/elemi: enable Genesys Logic GL9763E | Wisley Chen |
2020-11-20 | mb/google/volteer: Add keyboard layout to fw_config | Duncan Laurie |
2020-11-20 | mb/google/volteer/variants: Set TCSS PCIe RP0 to hidden by default | Duncan Laurie |
2020-11-20 | mb/google/volteer: Set up SATAXPCIE1 IOSSTATE based on detected device | Duncan Laurie |
2020-11-20 | mb/google/volteer: Enable RTD3 for SD card | Duncan Laurie |
2020-11-20 | mb/google/volteer/variants: Enable RTD3 for the NVMe device | Duncan Laurie |
2020-11-20 | soc/intel/common/acpi,mb/*: replace the two obsolete LPID with PEPD | Michael Niewöhner |
2020-11-19 | soc/intel/common/acpi: rename LPID to PEPD | Michael Niewöhner |
2020-11-19 | mb/google/volteer/var/terrador: Correct enable_gpio to GPP_F16 | David Wu |
2020-11-18 | mb/google/volteer: Add new Audio option to FW_CONFIG | Wisley Chen |
2020-11-18 | mb/google/volteer: Update flashmap descriptor to add ME_RW_A/B region | Jamie Ryu |
2020-11-17 | mb/google/volteer/variants/volteer2: Tune Volteer2 I2C2 bus frequency | Johnny Li |
2020-11-16 | volteer/variants/eldrid: Goodix touch panel power-on sequence tuning | Nick Chen |
2020-11-16 | mb/google/volteer/var/voema: Add memory parts and generate DRAM IDs | David Wu |
2020-11-13 | mrc_cache: Move code for triggering memory training into mrc_cache | Shelley Chen |
2020-11-13 | mb/google/volteer/variant/lindar: Update devicetree settings | Stanley Wu |
2020-11-13 | mb/google/volteer: Configure IRQs as level triggered for HID over I2C | Karthikeyan Ramasubramanian |
2020-11-11 | soc/intel/tigerlake: Update Kconfig for NEM Enhanced Mode | Shreesh Chhabbi |
2020-11-09 | mb/google/volteer/eldrid: Describe the privacy_gpio | Ricardo Ribalda |
2020-11-09 | mb/google/volteer/var/voema: Add memory parts and generate DRAM IDs | David Wu |
2020-11-09 | mb/google/volteer/var/voema: config CSE LITE | David Wu |
2020-11-09 | mb/google/variant/voema: Select USE_CAR_NEM_ENHANCED_V2 for voema | David Wu |
2020-11-09 | mb/google/volteer: Skip TPM detection except on SPI | Jes Klinke |
2020-11-09 | mb/google/volteer/variants/volteer2: Tune I2C3 camera bus freq 400 kHz | Johnny Li |
2020-11-06 | mb/google/volteer/var/elemi: Update gpio and devicetree | Wisley Chen |
2020-11-06 | mb/google/variant/elemi: config CSE LITE | Wisley Chen |
2020-11-06 | mb/google/variant/elemi: Select USE_CAR_NEM_ENHANCED_V2 for elemi | Wisley Chen |
2020-11-04 | mb/google/volteer/var/voema: Update dq/dqs mappings | David Wu |
2020-11-04 | mb/google/volteer: clang-format mainboard.c | Jes Klinke |
2020-11-03 | mb/google/volteer: Log EC events in case of S0ix resume | Furquan Shaikh |
2020-11-02 | mb/google/volteer/var/volteer2: Merge `common_soc_config` | Angel Pons |
2020-11-02 | mb/google/volteer/variants: Describe USB ports in devicetree | Duncan Laurie |
2020-11-02 | mb/google/volteer: Add DB_USB3_NO_C option for DB_USB field | Duncan Laurie |
2020-11-02 | mb/google/volteer: New variant for Volteer reworked with Dauntless | Jes Klinke |
2020-11-02 | mb/google/volteer/var/terrador: Enable SaGv support | David Wu |
2020-11-02 | mb/google/volteer/variants/delbin: Update DPTF parameters for delbin | Frank Chu |
2020-11-02 | volteer: Create voema variant | David Wu |
2020-11-02 | mb, soc/intel: Reorganize CNVi device entries in devicetree | Furquan Shaikh |
2020-11-02 | mb/google/volteer: Disable DPTF active policy for terrador and todor | David Wu |
2020-10-30 | mb/google/volteer: Remove RIPTO support for camera | Daniel Kang |
2020-10-30 | mb/google/volteer: Separate power resource for VCM | Daniel Kang |
2020-10-30 | tigerlake mainboards: switch to devtree aliases for PMC MUX connectors | Tim Wawrzynczak |
2020-10-30 | mb/google/volteer/variants/volteer2: I2C5 trackpad bus freq 400 kHz | Johnny Li |
2020-10-29 | mb/google/volteer: correct memory id for elemi | Wisley Chen |
2020-10-26 | mb/google/volteer: Add a DPTF policy for Eldrid | Nick Chen |
2020-10-26 | mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable` | Michael Niewöhner |
2020-10-26 | mb/google/volteer/var/voxel: enable GPP_D17 for FCAM_PWR | Sheng-Liang Pan |
2020-10-26 | mb/google/volteer: Use PCIE_CLK_NOTUSED in place of 0xFF | David Wu |
2020-10-26 | mb/google/volteer/var/terrador: Disable SRCCLKREQ1# | David Wu |
2020-10-26 | mb/google/volteer/var/voxel: Disable SRCCLKREQ1# | Sheng-Liang Pan |
2020-10-23 | mb/google/volteer: Add settings for noise mitgation | Shaunak Saha |
2020-10-20 | mb/google/volteer/var/terrador: Configure board specific DPTF parameters | David Wu |
2020-10-20 | mb/google/volteer/variants/lillipup: add generic SPDs | Nick Vaccaro |
2020-10-19 | volteer+vendorcode: Retrieve Cr50 version only via SPI | Jes Klinke |
2020-10-19 | mb/google/volteer: Enable USB4 retimer driver | Duncan Laurie |
2020-10-19 | mb/google/volteer/elemi: Add memory.c for DDR4 | Wisley Chen |
2020-10-14 | mb/google/volteer: Disable HybridStorageMode for volteer baseboard | Shaunak Saha |
2020-10-13 | {src/mb,util/autoport}: Use macro for DSDT revision | Elyes HAOUAS |
2020-10-13 | volteer: Create elemi variant | Wisley Chen |
2020-10-13 | mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devices | Furquan Shaikh |
2020-10-12 | mb/google/volteer/var/voxel: disable DdiPortHpd | Sheng-Liang Pan |
2020-10-12 | mb/google/volteer: Fix typo in baseboard power limits | Sumeet R Pawnikar |
2020-10-12 | mb/google/volteer/variants/eldrid: Add SPD for H5ANAG6NCJR-XNC | Nick Vaccaro |
2020-10-10 | mb/google/volteer: Use device aliases | Duncan Laurie |
2020-10-09 | mb/google/volteer/variants/volteer2: Update DPTF parameters | Terry Chen |
2020-10-08 | mb/google/volteer: disable TBT if no USB4 hardware available | Nick Vaccaro |
2020-10-05 | mb/google/hatch,dedede,volteer: enable CHROMEOS_DRAM_PART_NUMBER_IN_CBI | Nick Vaccaro |
2020-10-05 | mb, soc: change mainboard_get_dram_part_num() prototype | Nick Vaccaro |
2020-10-05 | soc/intel/common/block/acpi: Factor out common platform.asl | Subrata Banik |
2020-10-05 | mb/{google,intel}/{volteer,tglrvp}: Refer to common IPU ASL | Subrata Banik |
2020-09-30 | mb/google/volteer: Update SLP_Sx assertion widths and PwrCycDur | Jamie Ryu |
2020-09-29 | mb/google/volteer: Change default camera power GPIO to 0 | Daniel Kang |
2020-09-29 | mb/google/volteer/halvor: Update settings for audio function | Frank Wu |
2020-09-29 | mb/google/volteer: Add "i2c-allow-low-power-probe" property for | Daniel Kang |
2020-09-28 | mb/volteer: Use Genesys Logic GL9755 for Delbin, Volteer2 | Ravi Sarawadi |
2020-09-28 | mb/google/volteer/variants/eldrid: Configure GPP_S4 and GPP_S5 | nick_xr_chen |
2020-09-28 | mb/google/volteer/var/terrador: Enable audio SMBIOS OEM string | Kevin Cheng |
2020-09-28 | mb/google/volteer: Improve Eldrid Port 1 USB2 Eye Diagram | nick_xr_chen |
2020-09-25 | mb/google/volteer: Wake on AC connect and disconnect | Abe Levkoy |
2020-09-25 | volteer: Create boldar variant | Ronak Kanabar |
2020-09-24 | mb/google/volteer: Enable CnviBtAudioOffload | John Zhao |
2020-09-24 | mb/google/volteer/var/voxel: Update gpio settings for EVT | Sheng-Liang Pan |
2020-09-23 | treewide: rename GENERIC_SPD_BIN to HAVE_SPD_BIN_IN_CBFS | Michael Niewöhner |
2020-09-22 | mb/google: Drop unneeded empty lines | Elyes HAOUAS |
2020-09-21 | volteer: set GSPI CS to deasserted by default | Caveh Jalali |
2020-09-21 | mb/google/volteer: Add firmware configuration for MAX98373_ALC5682I_I2S_UP4 | Frank Wu |
2020-09-21 | mb/google/volteer: fw_config: Add fields for keyboard features | Duncan Laurie |
2020-09-18 | mb/google/volteer: Remove redundant GPIO decls in Eldrid | Tim Wawrzynczak |
2020-09-18 | mb/google/volteer/eldrid: Add option to enable WiFi SAR configs | Malik_Hsu |