summaryrefslogtreecommitdiff
path: root/src/mainboard/google/slippy/devicetree.cb
AgeCommit message (Collapse)Author
2020-03-31mb/google/slippy: Convert variants to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Test: build all slippy variants, compare generated static.c to ensure resulting generated contents unchanged (although layout will) Change-Id: If237fad38a1bccfb8e51edfae3ecb75d05ade240 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2016-07-27mainboard/google/slippy: remove unobtainable mainboardAaron Durbin
The slippy board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I24fb08d9be35b2367e7aa64520ce5778ab861535 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15902 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2015-05-28igd.asl rewriteVladimir Serbinenko
Old igd.asl had inconsistent addresses (between _DOD and actual device) and ghost devices. Any of those is enough to make brightness on windows fail and make igd.asl out-of-ACPI-spec. Also old code favoured ridiculous copying of the same thing 6 times per chipset. Leave only hooking up and chipset-specific part in chipset directory. Move NVS handling and ACPI-spec parts to a common file. Change-Id: I556769e5e28b83e7465e3db689e26c8c0ab44757 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7472 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-04-30cpu/intel/haswell: remove dependency on socket_rpga989Matt DeVillier
Remove dependency of Haswell on cpu/intel/socket_rpga989 code, which is a carry-over from Sandy Bridge/Ivy Bridge and older coreboot conventions where features were structured around socket types. Add CPU-specific options to Kconfig and required subdirs to Makefile.inc which are curently included with socket_rpga989. TEST=successfully built and booted on google/panther Change-Id: Ic788e2928df107d11ea2d2eca7613490aaed395c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/10037 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2013-12-21slippy/falco/peppy: update ACPI C-state settingsDuncan Laurie
Since these boards do not support C10 we should not bother advertising that state in the ACPI _CST. Instead use this map: ACPI(C1) = MWAIT(C1E) ACPI(C2) = MWAIT(C3) ACPI(C3) = MWAIT(C7S) Change-Id: I37eb02bf9555c74e957316a1ba9778eb2b6ee128 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/62898 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/4377 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-12HDA: Enable Mini-HDA and fix up PCH-HDA initDuncan Laurie
The SystemAgent contains a mini-hd audio controller at PCI 0:3.0 which uses the same verb table init sequence as the southbridge. In order to avoid two copies of the verb table loading code I separated out the HDA verb table functions into a file that can be re-used and then added a minihd driver to the haswell northbridge. The minihd verb table is the same across devices so it can live within the minihd driver rather than needing to be specified in each separate mainboard. I also fixed up the driver for lynxpoint HDA by following the reference code. Without HDMI cable plugged in driver does not find any codec, and it does not seem to re-probe when HDMI is connected. We may be missing kernel patches for this. hda-intel 0000:00:03.0: no codecs found! With a basic kernel patch to add 0x0a0c device ID to HDA driver and with HDMI cable connected it is much happier: snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 Change-Id: Ifa587984be4fc2801704a0368b9cdf8379c2450e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/59336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4318 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25slippy: Enable EC SMIDuncan Laurie
Enable GPIO SMI for GPIO34 and set it as inverted so it is only generated when it is raised by the EC. 1) ec console command: lidopen 2) wait until booted to developer screen 3) ec console command: lidclose 4) ensure system turns off Change-Id: I7d50f171f3f4539c7c264103d1ffc7c5d0f1c7ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56052 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4177 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add panel power sequence timingsDuncan Laurie
These are placeholder values until we can configure for the exact panel. Change-Id: Ibe88cc3588947366eb1728e5b3e1ab8c8be6dfe8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56807 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4196 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: set PWM valuesAaron Durbin
The dev screen was not displaying properly. With the PWM values programmed the screen displays correctly. Change-Id: I82b56a92e4168022082a2e519026977ee2ae0c9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51472 Reviewed-on: http://review.coreboot.org/4172 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Put SerialIO devices in PCI modeDuncan Laurie
The device at function 0 also needs to be enabled or the kernel will ignore all other functions. 00:15.0 DMA controller: Intel Corporation Lynx Point-LP Low Power Sub-System DMA (rev 03) 00:15.1 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #0 (rev 03) 00:15.2 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #1 (rev 03) Change-Id: I0e1bc7bb719756496c46664d66dc1b1cf2f4d1ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51370 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4171 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add EC to the device treeDuncan Laurie
This lets the keyboard init get called properly. Change-Id: I11ffb459907188a58149d28a6ade0b7de7d15d08 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50853 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4167 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Prepare LPC IO decode ranges for ECDuncan Laurie
- 0x200-0x208 for host command window - 0x800-0x8ff for host command arguments and parameters - 0x900-0x9ff for exported EC memory map Change-Id: I064b969843ef0d3c602793d1cb3d82715775c05e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49755 Reviewed-on: http://review.coreboot.org/4151 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Initial mainboard commitDuncan Laurie
Change-Id: I33876b90902d4a08d760eb482b08ba41be6e3695 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49531 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4147 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 17:29:05 +0000