summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rex
AgeCommit message (Expand)Author
2024-01-27mb/google/rex: Organize models configs alphabeticallySubrata Banik
2024-01-26mb/google/rex/var/karis: Skip tcc_offset overrideSubrata Banik
2024-01-26mb/google/rex/var/screebo: Modify TCC_offset to 20Subrata Banik
2024-01-25mb/google/rex/variants/deku: update USB-C port configurationTony Huang
2024-01-24*/mem_parts_used.txt: Change Makefile.inc to Makefile.mkMartin Roth
2024-01-24mb/google/oak to rex: Rename Makefiles from .inc to .mkMartin Roth
2024-01-24mb/google/rex/var/rex: Set TCC to 100°CSumeet Pawnikar
2024-01-11mb/google/rex: Remove redundant HAVE_FSP_LOGO_SUPPORT configSubrata Banik
2024-01-03mb/google/rex/var/screebo: Prevent camera LED blinking during bootJason Chen
2024-01-02mb/google/rex/var/karis: Enhance CNVi and PCIe switchingTyler Wang
2023-12-23mb/google/rex/var/screebo: Update DTT settings for thermal controlKun Liu
2023-12-22mb/google/rex/var/karis: Adjust touchscreen power-on sequenceTyler Wang
2023-12-21mb/google/rex/var/karis: Add HDMI/eDP GPIOs to early GPIO listTyler Wang
2023-12-21mb/google/rex/var/screebo: Remove Camera EEPROM off timingWentao Qin
2023-12-21mb/google/rex/var/screebo: Configure slew rate to 1/8 for GT domainKun Liu
2023-12-21mb/google/{brya,brox,rex}: Update ec_sync wake capabilityMark Hasemeyer
2023-12-20mb/google/rex/variants/deku: correct GPIO configurationEran Mitrani
2023-12-20mb/google/rex/var/karis: Add PANEL_PWRSEQ_EC_CONTROL in fw_configTyler Wang
2023-12-20mb/google/rex/var/karis: Update fw_config FAN fieldTyler Wang
2023-12-20mb/google/rex/var/screebo: Configure Acoustic noise mitigationSubrata Banik
2023-12-19mb/google/rex/var/screebo: Add delay 1ms after Main 3V3Kun Liu
2023-12-18mb/google/rex/var/karis: Enable audio BT offloadTyler Wang
2023-12-16mb/google/{rex,ovis}: Decrease EPP to 45% for MTL performance expectationSukumar Ghorai
2023-12-14mb/google/rex/var/screebo: Change GPP_B14 from UP_20K to NONEKun Liu
2023-12-12mb/google/rex/var/screebo: Increase PL1 max value from 15W to 25WKun Liu
2023-12-08mb/google/rex/var/screebo: set audio GPIO pins based on fw_configTerry Cheong
2023-12-06mb/google/rex/variants/deku: Enable CNVi PCI deviceEran Mitrani
2023-12-04mb/google/rex/var/screebo: Override power limitsSubrata Banik
2023-12-04mb/google/rex/variants/deku: Complete USB configurationEran Mitrani
2023-12-04mb/google/rex/variants/deku: Add basic DTTEran Mitrani
2023-12-04mb/google/rex/var/deku: Enable LAN0, LAN1Eran Mitrani
2023-12-04mb/google/rex/var/ovis: Add power limit support for MCH ID 0x7d14Subrata Banik
2023-12-04mb/google/rex: Simplify power limit configuration usageSubrata Banik
2023-12-02mb/google/rex: Enhance power limit override mechanismSubrata Banik
2023-11-30mb/google/rex/variants/deku: Add GPIO configurationEran Mitrani
2023-11-29mb/google/rex/var/screebo: Change GPP_B14 from NC to NFKun Liu
2023-11-27mb/google/rex/var/screebo: Enable BT audio offload configKapil Porwal
2023-11-22mb/google/rex: Enable FSP logo rendering for all Rex variantsSubrata Banik
2023-11-22mb/google/rex/var/karis: Set pen detect pin to NC for non-stylus skuTyler Wang
2023-11-21mb/{google,intel}/{rex,mtlrvp}: Enable SOC_INTEL_COMMON_BASECODE_RAMTOPSubrata Banik
2023-11-10mb/google/rex/var/screebo: Update DFP portzhourui
2023-11-09mb/google/rex/variants/deku: Add display configurationEran Mitrani
2023-11-08mb/google/rex: split TOUCHSCREEN_I2C_SPI definitionYH Lin
2023-11-07mb/google/rex/variants/deku: Add USB configurationEran Mitrani
2023-11-07mb/google/rex/variants/deku: Add SSD card configEran Mitrani
2023-11-07mb/google/rex/variants/deku: Add I2C configEran Mitrani
2023-11-07mb/google/rex/variants/deku: Add RAM id for MT62F2G32D4DS-026Eran Mitrani
2023-11-01mb/google/rex/var/rex0: Toggle NVMe PWR pin to reset SSDWonkyu Kim
2023-11-01mb/google/rex: Avoid hang for pre-prod SoC by setting SAGV_POINTS_0_1_2Subrata Banik
2023-10-31mb/google/rex/var/screebo: Disable FVMSubrata Banik
2023-10-31mb/google/rex/var/screebo: Set Baseline Power LimitSubrata Banik
2023-10-28mb/google/rex: add dptf settings for 2+4 SOC SKUKane Chen
2023-10-28mb/google/rex/var/rex0: Configure EN_WWAN_PWR GPIO based on CBIJeremy Compostella
2023-10-28mb/google/{rex, ovis}: Introduce devicetree.cb for pre-prod SoCSubrata Banik
2023-10-27mb/google/rex: Update FMD to support CBFS verificationAnil Kumar
2023-10-25mb/google/rex: Create deku variantEran Mitrani
2023-10-23mb/google/rex/var/karis: Modify TCC_offset to 10Tyler Wang
2023-10-23mb/google/rex: Use upstream driver properties for SX9324Ivy Jian
2023-10-20Revert "mb/google/rex: Enable sending EOP from payload"Matt DeVillier
2023-10-20mb/google/rex: Enable sending EOP from payloadKapil Porwal
2023-10-20mb/google/rex/var/karis: Remove I2C2 "on" settingsTyler Wang
2023-10-20mb/google/rex: Set frequency and gears for SaGv pointsBora Guvendik
2023-10-20mb/google/rex/var/karis: Use 2 gpio for stylus detect/wakeTyler Wang
2023-10-18mb/google/rex: enable WIFI_SAR for all variantsYH Lin
2023-10-18mb/google/rex/var/karis: sync CBI FW_CONFIG definitionsYH Lin
2023-10-18mb/google/rex/var/karis: add hook for WiFi SAR tableYH Lin
2023-10-18mb/google/rex/var/karis: Add FAN field in fw_configTyler Wang
2023-10-16mb/google/rex/var/rex: Configure cpu power limits by battery statusJamie Ryu
2023-10-13mb/google/rex/variant/rex0: HID over SPI - change frequency to 30MHZEran Mitrani
2023-10-13mb/google/rex/var/rex0: Update NVM configuration for WFCJamie Ryu
2023-10-13Revert "mb/google/rex/var/screebo: Set `SAGV_POINTS_0_1_2` to avoid hang"Wentao Qin
2023-10-12mb/google/rex/var/karis: Fix touchscreen HID to ELAN9004Tyler Wang
2023-10-11Revert "mb/google/rex/var/screebo: Enable GL9750 invert WP function"Kun Liu
2023-10-11mb/google/rex/var/karis: Set touchscreen power/reset GPIOs correctlyTyler Wang
2023-10-10mb/google/rex/var/screebo: Update DTT settings for thermal controlKun Liu
2023-10-10mb/google/rex/var/rex0: update thermal settings to start fan earlierSumeet Pawnikar
2023-10-07mb/google/{rex,ovis}: Disable package C-state auto demotionSukumar Ghorai
2023-10-04mb/google/rex: Configure ISH UART TX/RX as NCBernardo Perez Priego
2023-10-03mb/google/rex: Fix ISH I2C pad for suspendCliff Huang
2023-09-28mb/google/rex/var/ovis: Add DPTF configurationJakub Czapiga
2023-09-26mb/google/rex/var/rex0: Configure I2C5 timingIvy Jian
2023-09-23mb/google/rex: Move selects from Kconfig.name to KconfigFelix Singer
2023-09-22mb/google/rex/var/rex0: Add entries for SAR Proximity SensorsSubrata Banik
2023-09-22mb/google/rex: Add new FMD for prod (QS) Meteor Lake siliconSubrata Banik
2023-09-21mb/google/rex/var/karis: Enable PIXA touchpadTyler Wang
2023-09-20mb/google/rex/var/karis: Set VPU disable as defaultTyler Wang
2023-09-20mb/google/rex: Select MIPI pre-prod if MTL pre-prod Si setSubrata Banik
2023-09-20mb/{google,intel}: Choose platforms with pre-prod Meteor Lake SoCSubrata Banik
2023-09-19mb/google/rex/var/screebo: Change GPP_C06 to NCZhongtian Wu
2023-09-16mb/google/rex: Optimize FMD usage for rex variantsSubrata Banik
2023-09-16Revert "mb/google/rex/var/screebo: Reduce TCC from 90°C to 80°C"Subrata Banik
2023-09-15mb/google/rex/var/karis: Disable stylus/FP module based on fw_configTyler Wang
2023-09-15mb/google/rex/var/karis: Update fw_config settingsTyler Wang
2023-09-15mb/google/rex: add support for UWBEran Mitrani
2023-09-14mb/google/rex: Enable DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC for ES v...Jamie Ryu
2023-09-08mb/google/rex: Fix ACPI MPTS method for non-5G board SKUsCliff Huang
2023-09-08mb/google/rex: Require VBOOT_LID_SWITCH for Chromebook designSubrata Banik
2023-09-07mb/google/rex/var/karis: Update MIPI User facing camera settingsTyler Wang
2023-09-04mb/google/rex/var/screebo: Set `SAGV_POINTS_0_1_2` to avoid hangWentao Qin
2023-09-02mb/google/rex/var/karis: Drop unused audio codecs and amplifiersTyler Wang
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 21:36:47 +0000