summaryrefslogtreecommitdiff
path: root/src/mainboard/google/poppy
AgeCommit message (Collapse)Author
2018-10-05atlas: control touchscreen power using ACPICaveh Jalali
This adds the ACPI controls for power sequencing the touchscreen. The initial setting is to keep the touchscreen powered off and in reset. When linux is ready to talk to the touchscreen, it powers it on and releases reset via ACPI. BUG=b:110286344 TEST=verified touchscreen is functional in chromeos Change-Id: I58c42a8f09342cfe54f82ef0e6cd8ea72a5140dc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28869 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04mb/google/poppy/variant/nocturne: update GPIO configurationNick Vaccaro
GPP_C19 is not being set as the code is incorrectly setting GPP_C16 instead, causing SAR sensor not to work, so this change sets GPP_C19 to NF1. GPP_E3 is not being initialized in the code. Initialize GPP_E3 to a no connect as documented in the board schematic. BUG=b:117124878 TEST: 'emerge-coreboot chromeos-bootimage', flash nocturne and verify that i2c transactions work for the left SAR sensor. Change-Id: I9e972dbe4214cdd15d80d63dfa058e7755f7ecbb Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28867 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04mb/google/poppy/variant/nocturne: increase touchscreen reset delayNick Vaccaro
Increase the reset delay for the touchscreen to 10 ms. BUG=b:116857433 TEST='emerge-nocturne coreboot chromeos-bootimage', flash and boot nocturne to kernel, log in and execute the following two commands: echo "i2c-WCOM50C1:00" > /sys/bus/i2c/drivers/i2c_hid/unbind echo "i2c-WCOM50C1:00" > /sys/bus/i2c/drivers/i2c_hid/bind and verify the bind command does not echo back a "-bash: echo: write error: No such device" error. Change-Id: I102b57ea5a10d22bee6d4f7c6f114b380a5d586b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28803 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04mb/google/poppy/variants/rammus: Shorten oem_table_id to RAMMUSmarxwang
This patch modifies "oem_table_id" from "RAMMUSMAX" to "RAMMUS" so that the audio topology file can be loaded properly by the operating system. BUG=b:112945714 BRANCH=master TEST=There is no error message like "failed to load topology firmware" in kernel v4.4 log. Change-Id: I66a38ea38791dd3d9606a05b7b696236c350237f Signed-off-by: Marx Wang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/28870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-04mb/google/nocturne: Define GPP_D17 as EC_SYNC_IRQDuncan Laurie
Use GPIO GPP_D17 pin as the EC sync interrupt and provide this value to the embedded controller to be exported to the OS. This interface was tested on a reworked Nocturne board with modified EC and a modified kernel driver to ensure that the interrupt asserts as expected and can be used by the kernel driver. Change-Id: Ie2b33692367b5d9ecc2b128180d8cfe4f6b347b1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/28759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28mainboard/google/poppy/variants/rammus: Modify VR settingstatham_chu
We refer to Intel Doc#594883. The recommended Ac/Dc loadline values are as below: # VR Settings Configuration for 4 Domains #+----------------+-------+-------+-------+-------+ #| Domain/Setting | SA | IA | GTUS | GTS | #+----------------+-------+-------+-------+-------+ #| Psi1Threshold | 20A | 20A | 20A | 20A | #| Psi2Threshold | 2A | 2A | 2A | 2A | #| Psi3Threshold | 1A | 1A | 1A | 1A | #| Psi3Enable | 1 | 1 | 1 | 1 | #| Psi4Enable | 1 | 1 | 1 | 1 | #| ImonSlope | 0 | 0 | 0 | 0 | #| ImonOffset | 0 | 0 | 0 | 0 | #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | #| AcLoadline | 14.4 | 4.2 | 5.7 | 4.47 | #| DcLoadline | 14.0 | 4.17 | 4.2 | 4.3 | #+----------------+-------+-------+-------+-------+ BUG=b:112167318 BRANCH=master TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Change-Id: I2d83d835ec841ac4cc811a0a69f74d203d5ea173 Signed-off-by: statham_chu <statham_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-26mb/google/poppy/variants/nocturne: Update PowerLimit1 maximum valueSumeet Pawnikar
Increase power limit1 maximum value from 5W to 7W. This value as per recent measurement on closed system which shows better performance results. BUG=None TEST=Build and tested on Nocturne system. Performance tests show better results. Change-Id: I7485b1d2afde46ec28d548c13be35a43e7572918 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-26mb/google/poppy/variants/nocturne: Add tdp_pl1_override valueSumeet Pawnikar
Add tdp_pl1_override value as 7W. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board Change-Id: I16d3894da68bc3be6eff526062f9a88ef2df60c7 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/28708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org>
2018-09-26mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
The previous does not work well enough when testing with high ambient temperature. Update DPTF settings to make it work better. List of tweaks: 1. Raise DRAM Critical temperature from 48C to 55C Note that there are mechanisms in EC that complement this because of DPTF limitation that we can't have multiple passive temperatures. 2. Lower response time for DRAM temp sensor from 60s to 5s. 3. Increase throttle priority to the charger when DRAM hit passive temperature from 100 to 200. BUG=b:112550414 BRANCH=None TEST=Manually tested by thermal team. Change-Id: Idf7efa76b2c6085cf97aa9f65c6ce066e8cff99a Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/28738 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-26Revert "mb/google/poppy/variants/nautilus: Set grip sensor threshold"Seunghwan Kim
This reverts commit aef592d9b66aa18d83b0a211ead26013ff1f7d98. Reason for revert: Use values from driver instead of hardcoding in firmware (b:113303916) Change-Id: I02d21803f38da227f1d85b00cb6b5274d81dbbb4 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28690 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Enrico Granata <egranata@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mb/google/poppy/variants/rammus: Disable command TriState for rammusmarxwang
This patch sets the MRC UPD "CmdTriStateDis" to disable TriState for the rammus boards. Rammus is LPDDR3 design without RTT for CMD/CTRL. BUG=none TEST=Run memtester app and also webgl fishtank on the LPDDR3 kabylake boards and also check the margin data is proper in FSP. Change-Id: Iee115f49ba5b36dc5b0425e9da02b58cd19b2236 Signed-off-by: Marx Wang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/28568 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-21mb/google/poppy/variant/nocturne: set DMIC1 to NCNick Vaccaro
Change GPP_D17 and GPP_D18 to no connects as DMIC was moved to DMIC0. BUG=b:113744731,b:111106010 TEST=none Change-Id: I8ef42627e542182707c81389af9da33a114bc184 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/28689 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-20mb/google/poppy/variants/nocturne: Update DPTF settingsPuthikorn Voravootivat
Update DPTF settings based on recommendation from thermal team. BUG=b:112550414 BRANCH=None TEST=Manually tested by thermal team. Change-Id: I26f09392a3293ce4b3481f2be341a667d606bc10 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/28666 Reviewed-by: Todd Broch <tbroch@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-16mb/google/poppy/variants/rammus: fix S0ix entering issueZhuohao Lee
As we don't use the MIPI camera on Rammus, disable SA Imaging Unit and CIO2 devices to avoid the system failed to enter S0ix. BUG=b:114502527 BRANCH=master TEST=On DUT, echo freeze > /sys/power/state 1. check the S0ix status on EC console 2. check the value of /sys/kernel/debug/pmc_core/slp_s0_residency_usec Change-Id: I91629732db01ee534f0ddb67a2b358d725ef810e Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/28543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-16mb/google/poppy: Set UPD CmdTriStateDis for AtlasCaveh Jalali
This patch sets the MRC UPD CmdTriStateDis for the atlas boards. Atlas is a LPDDR3 design without RTT for CMD/CTRL. The original change for nocturne is I0f593761dcbd121e7e758421af178931b9d78295 mb/google/poppy: Set UPD CmdTriStateDis for Nocturne BUG=b:111812662 Change-Id: I45b6dd22412c689c8db64f4650e9fa9e87dec2ec Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-09-12mainboards: Add SMMSTORE region in chromeos configsPatrick Georgi
Only for those that are x86 and also have a RW_LEGACY region. The assumption is that all devices touched have 64k block sizes when choosing size and alignment of the region. Change-Id: I12addb137604f003d1296f34f555dae219330b18 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-12rammus: add SPD mapping for rammus and shyvana supportkane_chen
Add MICRO 4G and 8G SPD file. BUG=none BRANCH=master TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Change-Id: I7cb5b7f2bcdc6fbe0cbc640cad4af014f1a0edd6 Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28484 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-10mb/google/poppy/variants/nami: Add SPD for two memory partsRen Kuo
add two memory parts and ram id: hynix_dimm_H5ANAG6NCMR-VKC micron_dimm_MT40A1G16KNR-075E BUG=b:113983573 BRANCH=Nami TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Ia052f16b6c1e64ee6458fbdeea56a482a728c35a Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Reviewed-on: https://review.coreboot.org/28536 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-10mainboard/google/poppy/variants/rammus: Enable DA7219marxwang
On rammus, headset uses DA7219 so that we need to enable it. BUG=b:112945714 BRANCH=master TEST=emerge-rammus coreboot chromeos-bootimage Flash FW and check in kernel to see if DA7219 is up. Change-Id: I92dd412374d007aab264661e698fbbbbcf1eae45 Signed-off-by: marxwang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/28537 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-10mb/google/poppy: Set UPD CmdTriStateDis for NocturneShaunak Saha
This patch sets the MRC UPD CmdTriStateDis for the nocturne boards.Nocturne is LPDDR3 design without RTT for CMD/CTRL. BUG=b:111812662 TEST=Run memtester app and also webgl fishtank on the LPDDR3 kabylake boards and also check the margin data is proper in FSP. Change-Id: I0f593761dcbd121e7e758421af178931b9d78295 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/28379 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-07mb/google/poppy/variants/atlas: enable NVMeCaveh Jalali
This adds support for a x2 NVMe device on PCIe bus PCIe lines 5+6 and clock#4. BUG=b:113369699 TEST=booted on atlas Change-Id: I08e7c4d65662ddbb7d936915c896eb1fcb240ba8 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-06mainboard/google/poppy/variants/rammus: Enable GSPI clock for bus 0.kane_chen
On rammus, system halt was observed because of gspi clk value being set to 0. Log info from serial coreboot: FMAP: area RW_NVRAM found @ 9fa000 (24576 bytes) SF: Detected FAST_SPI Hardware Sequencer with sector size 0x1000, total 0x1000000 VBNV: Restore from flash failed ASSERTION ERROR: file 'src/soc/intel/common/block/gspi/gspi.c', line 443 gspi.c 442 443 assert(gspi_clk_mhz != 0); 444 assert(ref_clk_mhz != 0); 445 return (DIV_ROUND_UP(ref_clk_mhz, gspi_clk_mhz) - 1) & SSCR0_SCR_MASK; BUG=none BRANCH=master TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Change-Id: Ibe3937902901b2cdc1a196415c08fabb0f3155f2 Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28405 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-06mb/google/poppy/variants/nocturne: Enable DMIC CLK0/DATA0Sathyanarayana Nujella
DMIC's are now connected to DMIC_CLK0/DMIC_DATA0. So, enable the pins accordingly. BUG=b:113744731,b:111106010 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage' builds the image Change-Id: I48cace3c6099a2853fcb377c695a5e325094baf6 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/28433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-06mb/google/poppy/variants/nautilus: Bump VCC_SA voltage offset 75mVSeunghwan Kim
Nautilus-Wifi with m3 AP got a halt issue during CTS test. Nautilus-Wifi was FCS with Celeron AP first and also its PCB/BOM was validated only with Celeron. Since Celeron deos not support turbo boost mode, its steady power demend and lower CPU frequency may not reflect the potential noise hidden inside the board. Bumping VCC_SA voltage offset 75mV confirmed works to mitigate the potential noise coupling to VCC_GT/SA, and we verified this change makes this issue go away on Nautilus-Wifi board. Nautilus-LTE doesn't show this issue, since it has 10L PCB, will have better grounding and less noise/ripple than 8L PCB. BUG=b:111417632 BRANCH=poppy TEST=Verified CTS test pass without an issue. Change-Id: Id13fcc36a5b6ed42620c66f57a7303f30bff1a50 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-04mb/google/poppy/variants/rammus: add sku info into smbios tableZhuohao Lee
This patch adds the mainboard.c in order to support the sku id in smbios table where the sku id is queried from the eeprom via EC. BUG=b:113714761 BRANCH=master TEST=check the result of 'dmidecode' Change-Id: I3413784cca1ac10a2468d84f2d06c0e1d701fdcb Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/28426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-02mb/google/poppy/Kconfig: Fix missing device node /dev/tpm0 for H1Zhuohao Lee
This patch adds the DRIVERS_SPI_ACPI to enable the tpm device node. Without DRIVERS_SPI_ACPI, the kernel will popped out the below error: cr50-update[592]: Starting cr50 update cr50_get_name[595]: updater is /usr/sbin/gsctool -s cr50-update[609]: exit status: 3 cr50-update[613]: output: Could not open TPM: No such file or directory cr50_get_name[615]: board_id: '' board_flags: '0x', extension: 'prod' cr50-update[617]: hashing /opt/google/cr50/firmware/cr50.bin.prod cr50-update[678]: current state 3 in /var/cache/cr50.a3055efbc9.state cr50-update[682]: not running cr50-result[782]: Not running normal image. Skip setting Board ID trunksd[795]: TPM: Error opening tpm0 file descriptor at /dev/tpm0: No such file or directory BUG=none BRANCH=master TEST=/dev/tpm0 is created Change-Id: I35287c6c54299c2677c41fc830675570b9d45a94 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/28400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-30mb/google/poppy/variants/nautilus: Set grip sensor thresholdSeunghwan Kim
Set threshold parameter for grip sensor STH9321 .ProxCtrl6: 75 .ProxCtrl7: 99 BUG=b:113303916 BRANCH=poppy TEST=Built and verified parameter passed to driver Change-Id: I8a410a23b5e3831fc8e90118b810fc2409a026eb Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/28381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Enrico Granata <egranata@chromium.org>
2018-08-27mb/google/poppy/variants/atlas: Update DPTF parametersTodd Broch
Reduce the CPU passive threshold sample rate from 5 seconds to 1 second so DPTF will react faster to rapid temperature increases. Signed-off-by: Todd Broch <tbroch@chromium.org> BUG=b:113101335 BRANCH=atlas TEST=manual performance/power testing on nocturne. No longer see messages like below in syslog, 'CPU0: Package temperature above threshold' Change-Id: I2dc9d157b54500bae29e123978bb8ad6e05ef619 Reviewed-on: https://review.coreboot.org/28325 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-27mb/google/poppy/variants/nocturne: Update DPTF parametersTodd Broch
Reduce the CPU passive threshold sample rate from 5 seconds to 1 second so DPTF will react faster to rapid temperature increases. Signed-off-by: Todd Broch <tbroch@chromium.org> BUG=b:67459049 BRANCH=nocturne TEST=manual performance/power testing on nocturne. No longer see messages like below in syslog, 'CPU3: Package temperature above threshold' Change-Id: Ic20c718fd3a496db7c7192feec4f230d924cc458 Reviewed-on: https://review.coreboot.org/28324 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23mb/google/poppy/variants/nocturne: enable "Base Attached Switch" deviceDmitry Torokhov
This enables CBAS device on Nocturne to allow hid-google-whisker driver in kernel properly detect device configuration. Change-Id: I5905a2de208e94062f2768a9b7d22147f85c7f38 Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-on: https://review.coreboot.org/28262 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20atlas: enable keyboard backlight supportCaveh Jalali
This adds support for controlling the keyboard backlight over ACPI. BUG=b:112619894 BRANCH=none TEST=verified keyboard backlight can be adjusted using keyboard shortcuts Change-Id: I25713f341e8b5a4e50903ac109bfa717f20969d8 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28205 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20mb/google/poppy/variants/nocturne: enable eistMatt Delco
Enable Enhanced Intel SpeedStep (EIST) on nocturne. Change-Id: Ie9b832f5bc3a5ef300783bd9bcd7cf5d186b98fa Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20nocturne: Enable debouncing of SX9310 CLOSE / FAR IRQsEnrico Granata
This is meant to solve an issue where the proximity sensor may fluctuate between CLOSE / FAR in rapid succession upon the user removing their hand from the unit, before settling on the correct output. Using the hardware debouncing filter solves this issue and removes the spurious fluctuations. BRANCH=None BUG=None TEST=manual on Nocturne, observing events come in Change-Id: I78cc4852d42fcda6209fedce1ce91236b5814571 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/28112 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-17Nami: Disable powering off EC on cr50 updateDaisuke Nojiri
Nami doesn't support wakeup from hibernation by CR50. This causes the device to remain turned off after CR50 update. This patch disables turning off EC on cr50 update. CR50 resets the whole system. So, EC reset is not required. Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> BUG=b:112604277 BRANCH=none TEST=gsctool -a -u /media/removable/cr50.bin && reboot Verify EC reboots. AP prints 'Waiting for CR50 reset to pick up update' then reboots. Change-Id: I06f5eb6100e8af6ffec45d4de2b40eff44f89709 Reviewed-on: https://review.coreboot.org/28113 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/poppy/variants/nocturne: remove dup'ed dptf_enableMatt Delco
This file contains two instances of "dptf_enable" = "1". This change removes the 2nd instance (it doesn't have an explicit comment like the 1st instance). The dptf devices still seem to be present even with this change, as expected. Change-Id: I890006644be9176ebaf555cc121c816e12f2b596 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-15mb/google/poppy/variants/nocturne: sx9310 to 400kbMatt Delco
The spec of the sx9310 says the I2C interface can handle standard (100kb/s) and fast mode (400kb/s). The current setting is using fast plus (1000kb/s) so this change is reducing the speed to fast mode. I've been using the sensors with this change for a few weeks now, though I also don't recall seeing an issue prior to this change. Change-Id: I337fc02c52565d6ec4d7bac1b3564f65238962dc Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-15Revert "mb/google/poppy/variants/atlas: enable camera power and release reset"Caveh Jalali
This reverts commit 1fdb76945a9d06bbff37dee9da69e13a86c933f4. Camera power is now handled by ACPI rules - no need to force the GPIOs on by default. BUG=b:80106316,b:111141128 Change-Id: Ifefec320884989f106a4b09c956d3a3279a1491a Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28072 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Ping-chung Chen <ping-chung.chen@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/atlas: Add DISPLAY_DCR_EN GPIO pinCaveh Jalali
This defines new GPIO pin for controlling the display panel CABC function. The default value is high (enabled). BUG=b:112154569 Change-Id: I29083ab18e37f929a55b450b143463c67fe0abea Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28070 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-15mb/google/atlas: Update DPTF sensor namesCaveh Jalali
This updates the DPTF sensor names to reflect the sensor locations on the board. BUG=b:75454415 TEST=verified new strings show up in /sys/devices/LNXSYSTM:00/LNXSYBUS:00/INT3400:00/*/description Change-Id: Ibffe6cb361de212ca03e75deaa8c454546d267a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28069 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-14mb/google/poppy/variants/nocturne: Update PL1/PL2 for AMLRoy Mingi Park
This patch updates Power Limit (PL) for AML. - PL1 as 5W TDP as POR - PL2 as 18W TDP as POR BUG=None BRANCH=None TEST=Build coreboot for Nocturne board and check default PL1/PL2 TDP. cat /sys/class/powercap/intel-rapl/intel-rapl\:0/constraint_0_power 5000000 (5W TDP) cat /sys/class/powercap/intel-rapl/intel-rapl\:0/constraint_1_power 18000000 (18W TDP) Change-Id: Icb02a8a7c5fcd5e6aee45f14eba540a6b3ed3d67 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/27427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-14mb/google/poppy/variant/nami: Add TSR2 on DPTFT.H. Lin
Add TSR2 DART/DTRT package BUG=b:110451144 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test image with dptf.dv Change-Id: I3328e17328415f5ebdcf84263e5456e11e55f769 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-08-13mb/google/poppy/variants/nocturne: remove icc_max overridesNick Vaccaro
Remove icc_max overrides to allow SoC code to set proper icc_max based on CPU SKU. BUG=b:78122599 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage', flash to nocturne, boot to kernel and verify device doesn't hang after a few minutes. Change-Id: I37c44e2428b802d754f2b12b8a57601d257e6582 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27996 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/poppy/variant/nocturne: update PL2 based on CPU skuNick Vaccaro
This patch adds a function to overwrite PL2 setting based on CPU sku. From doc #594883, PL2 is 18W for AML-Y. BUG=b:110890675 BRANCH=None TEST=emerge-nocturne coreboot chromeos-bootimage & test with AML-Y and KBL-Y skus. Change-Id: Idfdc0c2434fdef56a7c25df05e640837a5096973 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27997 Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13mb/google/poppy/variant/atlas: Update PL2 based on CPU skuGaggery Tsai
This patch adds a function to overwrite PL2 setting based on CPU sku. From doc #594883, PL2 is 18W for AML-Y. BUG=b:110890675 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage & test with AML-Y and KBL-Y skus. Change-Id: I468befcd2c4ad6c2bb9ae91b323a43f87ff65a26 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27765 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09mb/google/poppy/variants/atlas: Do not override icc_maxCaveh Jalali
Skylake SoC code now sets the icc_max based on the CPU SKU, so we should not hard-code it in the device tree. BUG=b:110890675 BRANCH=None TEST=boots on atlas Change-Id: I7eb3499b7bea9ab2c49e1f299e2dbb688c8d1c33 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
2018-08-07mb/google/poppy/variants/nautilus: Set CABC_EN to GPO high before EDP power onSeunghwan Kim
If GPP_E22(CABC_EN) remained floating GPI(SoC default) at V3.3_DX_EDP on, it may cause damage on the GPIO pad. To prevent, we would set this pad to GPO on romstage before EDP power on. Since we need to cover all systems in market, I put it into romstage instead of early_gpio_table. BUG=b:111860510 BRANCH=poppy TEST=Verified CABC_EN is set to GPO high 5ms before EDP power on Change-Id: I34e2fe86329a88eb05e0ea3c6beac6a64754b41e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-07mb/google/poppy: Add variant callback for romstage GPIO configurationFurquan Shaikh
This change adds variant callback to get GPIO configuration table in romstage and configures these GPIOs before memory training is performed. BUG=b:111860510 BRANCH=poppy Change-Id: I1eb51356fb3f4c0f4ff29b22dbcde6dbece303ad Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07mb/google/poppy/variants/nautilus: Add SKU info to SMBIOSFurquan Shaikh
This change provides implementation of smbios_mainboard_sku() to add proper "skuX" string to SMBIOS table 1. BUG=b:112163362 TEST=Verified "dmidecode -t 1" reports skuX correctly. Change-Id: I7e42d2c80d791ea7170d066d2eeaa0c6811eb9c9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06mb/google/poppy/variants/rammus: add rammus devicetree.cbZhuohao Lee
Use the default value for Iccmax which is specified in vr_config.c. The AcLoadline and DcLoadline keep the poppy value. Besides, the USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT and the others on the daughterboard are set to USB2_PORT_LONG. Those setting need to be fine tuned later. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: Icabfac04c94b3d480872c243d811509e274ef122 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add gpio settingZhuohao Lee
The gpio setting is based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I20fc081d372b8686f6128a7e85276f9c6798b199 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add memory configurationZhuohao Lee
Add memory configuration based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I45efdc7893b5bcbca0de6e932e1452cc1a2ff028 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add audio, mic and codec configurationZhuohao Lee
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: change build directory to rammusZhuohao Lee
Move the build board directory from poppy to rammus. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-03mb/google/poppy/variants/atlas: Apply correct AC/DC loadlinesGaggery Tsai
This patch applies correct AC/DC loadline settings for Atlas from VRTT report. BUG=b:111419622 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage and use DbC to check the AC/DC loadline settgins. Change-Id: I6e85b885a6d3a1db9a980d12f3cfc036a771422a Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27788 Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02mb/google/poppy/variants/nami: Tune Fan speedSumeet Pawnikar
Tuning of fan speed for different temperature values. Earlier while running few benchmarks, fan was always getting on and starting at higher speed. With this change fan will start with lower speed and slowly speed gets increased if temperature continue going high. Thermal team provided these data after fine tuning of fan speed. BUG=None. TEST=Verified on Nami running with different benchmarks and observed fan speed. Change-Id: Ic3be9e44deef9570200c71807a2ee712d9f20876 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27683 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02mb/google/poppy/variants/nami: Enable mbox command for ISL VR c-state issueShelley Chen
There is a potential IMVP8 issue for KBL that affects Intersil VRs Nami is using one of the affected parts. The fix is to use an updated microcode and also send a mailbox box command from FSP. BUG=b:112081534 BRANCH=None TEST=Build and boot Nami Verify that suspend/resume and consecutive reboots are working Change-Id: I6ec18a4c3fae6a66cf8a95685d91a8ba51e2697c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-01mb/google/poppy/variant/nami: Overwrite AC/DC loadlinesGaggery Tsai
This patch adds a function to overwrite AC/DC loadlines for differnt projects. BUG=b:111761175 BRANCH=None TEST=emerge-nami coreboot chromeos-bootimage and use DCI to dump AC/DC loadline settings. Tested on Vayne and Akali. Change-Id: Id0068c5334c257b9f4c32b6088becbfe8391a864 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-30mb/google/poppy/variants/atlas: Add new Nanya memory optionTim Chen
- add Nanya NT6CL256T32CM-H1 to memory strapping table BUG=b:111906760 BRANCH=none TEST=none Change-Id: I1432b9ab84f01a7fee1bc562aa40c714ddbf639e Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Caveh Jalali <caveh@google.com>
2018-07-30mainboard/google/nocturne: simplify camera power referencesMatt Delco
This change primarily moves the PowerResource up to a more common scope so that the _PRx references are simpler. The ^ scope modifier isn't well supported everywhere amongst OSes and drivers. Windows 10 will BSOD early during boot with ACPI_BIOS_ERROR (code 0x6, which means it could not find the object referenced by a _PRx) with the way things are currently laid out). I've also not seen a firmware outside of coreboot that tries to reference count _ON and _OFF. Isn't it up to the OS to deference count, and whatever it tells ACPI is what should happen (i.e., on means on and off means off)? Some of the _UIDs are also duplicated. This change makes them unique. A few cosmetic changes are made so that diffing cam0.asl against cam1.asl has fewer extraneous differences. Change-Id: I9c9f6c712b075450539d5b84ac5bb221b3cbb57e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-30mb/google/poppy/variants/nocturne: enable FPMCU powerNick Vaccaro
Enable power to FPMCU by default on power-on and deassert the PCH_FPMCU_RST_ODL reset line. BUG=b:111880258 BRANCH=none TEST='emerge-nocturne coreboot chromeos-bootimage', flash and boot nocturne to kernel, login and execute "powerd_dbus_suspend" at kernel prompt, wait a few seconds, press power button to wake, then execute "cat /var/log/cros_fp.log | grep 'Reset cause'" and assure search comes up empty. Change-Id: I7f8419dd58f79816f8061d0da4a0d3984c814289 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27658 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30mb/google/poppy/variants/nocturne: enable ec host event wakeNick Vaccaro
Enable nocturne to wake from lid attach/detach events. BUG=b:111803637 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage", verify EC has commit a5abbbb4eb9b15a72624dddbfd727d0b324c3f36, and verify nocturne wakes from suspend on a lid attach/detach event. Change-Id: I22b957d741426ca8b49d1819cf39c940f55198eb Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27649 Reviewed-by: Aseda Aboagye <aaboagye@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30mb/google/nautilus: Remove obsolete fieldsAlan Chiang
Some fields were only required during early stages of IPU3. Remove some fields that aren't used for the current version of IPU3. BUG:None TEST=Launch camera app and check if it works properly. Change-Id: I72bcba13cc353a1b16fedeb7543fbbac432fbf5d Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Reviewed-on: https://review.coreboot.org/27617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-30mb/google/poppy/variants/nautilus: Set GPP_D21 to high as defaultSeunghwan Kim
Currently, default GPP_D21(LTE3_BODY_SAR) output level is low, it means LTE tx power is backoff mode as default. We would set GPP_D21 to high to change LTE tx power to normal mode as default. BUG=None BRANCH=poppy TEST=Verified default LTE tx power mode is normal mode as default Change-Id: I62e77196c2116924f437f61368f0ae7efd0e144c Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27661 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30mb/google/poppy/variants/nami: Fix fan is always ONJohn Su
Add the new setting for fan performance state. BUG=b:111860513, b:11865138 TEST=Fan do not run below trip point Change-Id: I894460b8b418217e2477608094c37018437cbb78 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-07-26nocturne: configure VR per Intel recommendationPratik Prajapati
These values are Intel recommended. IccMax = 28A DC and AC LL = 4mOhms Pl2 = 18w BUG=b:79666828 BRANCH=none TEST=Enabled p-states with patch Change-Id:I82d1516998cc26b789faa5d4e897feb06dc06020 and then "emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27175 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26mb/google/poppy/variants/nocturne: enable p-statesPratik Prajapati
This patch enables p-states for nocturne which was disabled by commit de31587a (mb/google/poppy/variants/nocturne: disable p-states). p-states feature was disabled as a temporary work-around as system was getting hung while booting up. Now with IMVP7 firmwware turning and hardware rework the issue is not seen, so its safe to enable p-states. BUG=b:79666828 BRANCH=none TEST=cherry picked Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d patch and then "emerge-nocturne depthcharge coreboot chromeos-bootimage" , flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I82d1516998cc26b789faa5d4e897feb06dc06020 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27257 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25mb/google/x86-boards: Get rid of power button device in corebootFurquan Shaikh
As per the ACPI specification, there are two types of power button devices: 1. Fixed hardware power button 2. Generic hardware power button Fixed hardware power button is added by the OSPM if POWER_BUTTON flag is not set in FADT by the BIOS. This device has its programming model in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this power button device by default if the power button FADT flag is not set. On the other hand, generic hardware power button can be used by platforms if fixed register space cannot be used for the power button device. In order to support this, power button device object with HID PNP0C0C is expected to be added to ACPI tables. Additionally, POWER_BUTTON flag should be set to indicate the presence of control method for power button. Chrome EC mainboards implemented the generic hardware power button in a broken manner i.e. power button object with HID PNP0C0C is added to ACPI however none of the boards set POWER_BUTTON flag in FADT. This results in Linux kernel adding both fixed hardware power button as well as generic hardware power button to the list of devices present on the system. Though this is mostly harmless, it is logically incorrect and can confuse any userspace utilities scanning the ACPI devices. This change gets rid of the generic hardware power button from all google mainboards and relies completely on the fixed hardware power button. BUG=b:110913245 TEST=Verified that fixed hardware power button still works correctly on nautilus. Change-Id: I733e69affc82ed77aa79c5eca6654aaa531476ca Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-24mb/google/poppy/variant/nami: Add custom VBT for panel T8/T10T.H. Lin
Fix VBT SSF setting for panel T8/T10 as Akali/Akali360 panel has T8 minimum 33.3 ms and T10 minimum of 100 ms. BUG=b:111530392 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test & measure T8/T10 waveform Change-Id: I642a1aa0b2d13b33e6113f94e73dfc77834766d4 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-23mb/google/poppy/variants/rammus: Add support for rammus boardZhuohao Lee
This change adds variant rammus derived from baseboard poppy. The setting is copied from the poppy and will be modified later BUG=b:111579386 BRANCH=master TEST=emerge-rammus coreboot Change-Id: I169c225e28183a7a93f1142a3bf87a60b26ce9ca Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-22mb/google/nautilus: Enable camera module NVMAlan Chiang
Enable DW9807 NVM support by adding required ACPI code BUG:b:110815821 TEST=On Nautilus board, execute "cat /sys/bus/i2c/devices/i2c-INT3499:00/eeprom" in the terminal and see if there is any data to be dumped. Change-Id: Ib83fa1a522402a59566e3f55fa5c1af4490266e4 Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Reviewed-on: https://review.coreboot.org/27508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-22mb/google/poppy/variants/nautilus: Add internal pull-up for USB2_OC2#Seunghwan Kim
Nautilus-WiFi board doesn't have external pull-up on USB2_OC2# route,then abnormal over-current is asserted on USB type-A port. It causes USB type-A port to be blocked, so we need this internal pull-up. BUG=b:111578984 BRANCH=poppy TEST=Verified over-current not triggered abnormally on basic sku board Change-Id: I159f686cef9c8d254f390d7f1dff8011f43fc066 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-21nocturne: enable GEO SARPratik Prajapati
Enable the GEO SAR feature for nocturne. OxM programs wifi_sar VPD key in factory. coreboot reads the VPD and creates the ACPI table as per the WGDS spec. BUG=b:65155728 BRANCH=none TEST= Set the wifi_sar VPD with below command (values are junk for test purpose only, actual values would be set be OxM) sudo vpd -f <coreboot.rom> -s wifi_sar=30313233343536373839303132333435363738393030313 24142433435364445463031324142433400364445463031323343444546303132333435 Flash the <coreboot.rom> and boot to kernel. Get ACPI table and WGDS would get created with VPD values passed in. Change-Id: I32ad591f15fdb34704c8d98d98646dfa2d8882ff Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/27501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-07-20mb/google/poppy/variants/nocturne: set nvme to use clk src 3Nick Vaccaro
Latest nocturne architecture uses clk src 3 for nvme. BUG=b:111514174 BRANCH=none TEST="emerge-nocturne coreboot chromeos-bootimage" and verify nvme nocturne devices are able to recognize the nvme controller. Change-Id: I5b2bf012ba88568cb4b0bb3918a3a2c6770ff4c1 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27536 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17mb/google/atlas: Add MIPI camera ASL filesChen, Ping-chung
Atlas has one sensor, create a single endpoint to CIO2. Create power resource for enabling/disabling camera. BUG=b:111141128 Branch=None TEST=Testing on Atlas board Change-Id: Ide0e923bbc34f869dd0227c0a29977645bc5d58d Signed-off-by: Ping-Chung Chen <ping-chung.chen@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/27350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
2018-07-13mb/google/poppy/variants/nami: Use Pantheon VBTIvy Jian
Add new Pantheon sku-id for loading vbt-pantheon.bin BUG=b:78663963 BRANCH=firmware-nami-10775.B TEST=Boots to OS and display comes up. Check the board specific vbt binary loaded. Change-Id: I1ee156372754ac0e77caae5959a9ca9884de95f4 Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27432 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-12mainboard/google/nocturne: Update GPIO_FCAM_PWR_ENRicky Liang
The FCAM_PWR_EN gpio should be GPP_B4 according to the latest board schematics. Change-Id: Id926bd224b3392d8a61b6d8ae0509053afaa5b9e Signed-off-by: Ricky Liang <jcliang@chromium.org> Reviewed-on: https://review.coreboot.org/27433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tomasz Figa <tfiga@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-07-11skylake: Remove "IshEnable"li feng
Remove "IshEnable" from soc_intel_skylake_config since it's not used anymore. Enable/disable ISH by checking if ISH device is turned on or not. Refer to https://review.coreboot.org/#/c/coreboot/+/26485/. BUG=b:79244403 BRANCH=none TEST=Built. Change-Id: I4d2889af118659852431c87cb516fd19b577efc5 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-11mainboard/google/poppy/variants/atlas: config ISH in mainboard sideli feng
To enable ISH device on atlas board, change "device pci 13.0 off end" to "device pci 13.0 on end" in file mainboard/google/poppy/variants/atlas/devicetree.cb. "IshEnable" is not needed. Config atlas board specific ISH setting in devicetree.cb. Dynamically load gpio setting for ISH enabled/disabled cases. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I8269a85cd2ab7917bfc0e7d63d988e0e678d0bf2 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06mb/google/poppy/variants/nocturne: fix FPMCU IRQ sensitivityVincent Palatin
the FPMCU_INT_L on GPP_C11 is active low but the kernel irq handler is defined as IRQF_TRIGGER_LOW, so do not invert it twice. BRANCH=poppy BUG=b:78613978 TEST=On Nocturne, the 'cros_ec' IRQ count in /proc/interrupts does not increment wildly. Change-Id: I56c13c797b133dd22669a2299bcd16ef14eed335 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/27221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06google: Use proper ACPI ID for Semtech chips: STHGwendal Grignou
Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Delco <delco@google.com> Reviewed-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-03mb/google/*: Remove selection of DRIVERS_PS2_KEYBOARDFurquan Shaikh
Until now, chromeec was doing keyboard initialization for the boards that have DRIVERS_PS2_KEYBOARD selected. However, coreboot does not leave the keyboard controller in a default reset state. This could result in payloads or OS failing to probe the controller as there could be stale data buffered in the controller during the handoff. Since the boards using chromeec already perform keyboard initialization in payload, there is no need to initialize the keyboard in coreboot too. This change gets rid of DRIVERS_PS2_KEYBOARD selection from all google mainboards using chromeec. BUG=b:110024487 TEST=Keyboard works fine after booting to OS even if user hits keys during BIOS to OS handoff. Change-Id: I1f49b060eb005c0f2b86f9d68d6758954eeb3cf0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27291 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mainboard/google/nocturne: Enable IPU3Lijian Zhao
Enable Image Processing Unit and CIO2 device that constitute IPU3. BUG=None TEST=Build and boot up into Nocturne platform and check with lspci. Change-Id: Ic2edf5ec7bde5c55ce1b13cf7b680094a9fffc6a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Set camera power sequenceLijian Zhao
To make image sensor working, the intended power sequence need to applied. BUG=NONE TEST=NONE Change-Id: I4833c0e303174b297c1d193495e08e55d294a717 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/27094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02mainboard/google/nocturne: Enable camera sensorsLijian Zhao
Sensors and CSI2 receiver configuration for Nocturne platform. IMX355 module has VCM, NVM and is on the second port of receiver. IMX319 module has NVM and is on the first port of receiver. Change-Id: I37c877df8062d5c79e25ed27775ab58e977555db Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-on: https://review.coreboot.org/26283 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02nocturne: Do not set 4 LSB of SX9310 CRTL0Gwendal Grignou
These bits start the acquisition process. They should only be set by the driver. BUG=b:74363445 TEST=compile Change-Id: I9e10f5570ac82124f7f4b5cc7aaad27da0c578be Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02nocturne: Fix casing for register definitionGwendal Grignou
Use lower case for hex values. BUG=b:74363445 TEST=compile Change-Id: I24afea58b1a791fac3c87ad397a696f7f6e0d127 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mb/google/poppy/variants/nami: Perform PL2 setting for sonaJohn Su
According to sona thermal table, PL2 need to check cpu id. And then set PL2 value. BUG=b:110867809 TEST=The thermal team verify OK Change-Id: I5759fb3c685e3d4eef1be054541f950843d19874 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-06-29mb/google/poppy: Fix bytes 145-146 in nayna_dimm_NT6CL256T32CM SPDT.H. Lin
nayna/NT6CL256T32CM-H1 file change byte 145/146 to be"20" for JEDEC spec BUG=b:79443146,b:109708239 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test on R69.10825 with mosys Change-Id: Iadc820111f0aed34e5b46d7e23dff44cb5bb811d Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27275 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28nocturne: Fix uid and desc for sx9310Enrico Granata
This commit changes the uid and desc fields for the sx9310 entries in the devicetree to be unique, and correctly identify the position of the respective sensors. Change-Id: I501df7d3349fdebc9673c9815f5b1b2458abac6e Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
2018-06-28mb/google/poppy/variants/nautilus: Use GPP_B20 to determine SKUSeunghwan Kim
We would use GPP_B20 instead of board id to determine nautilus SKU. BUG=b:80052672 BRANCH=poppy TEST=Verified the new coreboot could determine SKU correctly Change-Id: I1978b544eef7a184a3da191306ee32d862fa8c36 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27220 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/poppy/variants/nocturne: Update TSR sensor infoSumeet Pawnikar
This patch updates TSR sensor info with appropriate names. Also, updates Charger effect with correct TSR sensor mapping. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board. Change-Id: Ia3bbc78f8d823e88a91265e0d55c5ac2a4ea31a9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-25mb/google/poppy/variants/nami: Prevent leakage with touchscreen on PantheonCrystal Lin
We found GPP_C3 keeps high when system in S0ix mode. It caused 1.8V leakage. To fix this problem, add GPP_C3 into config for Pantheon Synaptics touchscreen. BUG=b:78436458 BRANCH=None TEST=Let DUT in S0ix mode and check GPP_C3 is normal. Change-Id: Idb2dab93178af1dae54265e49522b473b69a35af Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27177 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/nami: Enable xDCIShelley Chen
This change enables xDCI controller on nami. BUG=b:110443736 BRANCH=None TEST=None Change-Id: Ieb63e0d65ac1a142c151a3f93afe306b80a5d99a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27181 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: Add two new Samsung memory optionsCaveh Jalali
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table BUG=b:110498646 BRANCH=none TEST=none Change-Id: Iddacdf1e1d0e2bae0c6168c86e54f5f602cd9d19 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27184 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: add GPIO for bluetooth enableCaveh Jalali
This configures a GPIO pin for enabling/disabling bluetooth on the next version of the atlas board. The default is for bluetooth to be enabled at this point. BUG=b:110614620,b:110613353 BRANCH=none TEST=none Change-Id: I4ba940e89b1dc03548b7ab44b8f84dc9a3097acb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22mb/google/poppy/variants/nami: Fix non-working thermal sensor QT2 PSVJohn Su
Modify DPTF TRT parameters to solve thermal sensor QT2 PSV problem. BUG=b:109941652 TEST=The thermal team verify OK Change-Id: Id9d39d8282712a0341fea10f74c0e40bb1ac9d7c Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor.Enrico Granata
Change-Id: I7358ee34df873098a86d692cc8a909b0ec5023a8 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: add two new memory optionsNick Vaccaro
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table - add SPD files for K4E6E304EC-EGCF and K4EBE304EC-EGCF BUG=b:110277021 BRANCH=none TEST=none Change-Id: If1322311bd91842d6d32725822d91fd6d9e8077c Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: Update Slave Addresses of Max98373 Amp'sSathyanarayana Nujella
When played Left Only Audio and Right Only Audio, we observed that Audio got swapped. Left Data played on Right Speaker and Viceversa. This patch fixes the above issue. BUG=b:73635449 TEST=Play Left only & Right only Audio and cross check Audio. Change-Id: Ie9c417ad0634a76fc8a4126ee75886603f1b3da0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/27167 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nocturne: disable p-statesNick Vaccaro
Set register speed_shift_enable=0 in devicetree to disable p-states in coreboot as a temporary workaround for an SoC hang. BUG=b:79666828 BRANCH=none TEST="emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I71ed4c80c109b28ffa85d48338ce3a62396d272e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 09:31:09 +0000