Age | Commit message (Expand) | Author |
2021-06-07 | soc/amd/cezanne: Configure I2C Pad RX Select through devicetree | Karthikeyan Ramasubramanian |
2021-06-07 | mb/google/guybrush/var/guybrush: Update GPIO configuration | Karthikeyan Ramasubramanian |
2021-06-07 | psp_verstage: initialize i2c in soc_init | Kangheui Won |
2021-06-04 | mb/google/guybrush/var/guybrush: Reconfigure left speaker amplifier | Karthikeyan Ramasubramanian |
2021-05-27 | mb/google/guybrush,mancomb: enable crypto coprocessor PCIe device | Felix Held |
2021-05-27 | mb/google/guybrush: set PSPP policy to powersave | Felix Held |
2021-05-26 | src/mainboard/google/guybrush: update devicetree with USB settings | Julian Schroeder |
2021-05-25 | mb/google/guybrush: Add Goodix touchscreen | Ivy Jian |
2021-05-21 | mb/google/guybrush: Enable some PCIe power saving features | Matt Papageorge |
2021-05-20 | mb/google/guybrush: Add SoC thermal zone | Raul E Rangel |
2021-05-14 | mb/google/guybrush,mancomb: select GOOGLE_SMBIOS_MAINBOARD_VERSION | Ivy Jian |
2021-05-12 | mb/google/guybrush: Configure wake resource for WiFi | Karthikeyan Ramasubramanian |
2021-05-12 | mb/google/guybrush,mancomb: Adjust GBB size to 12KB | Martin Roth |
2021-05-10 | mb/google/guybrush: Enable GFX HDA device | Karthikeyan Ramasubramanian |
2021-05-10 | mb/google/guybrush: Enable PP5000_PEN | Eric Peers |
2021-05-09 | mb/google/guybrush: Populate PIC IRQ data | Raul E Rangel |
2021-05-06 | mb/google/guybrush: Switch eSPI ALERT# to in-band | Raul E Rangel |
2021-05-06 | soc/amd/common/espi,mb/: Allow configuring open drain ALERT# | Raul E Rangel |
2021-05-05 | mb/google/guybrush: Configure Pen Detect device | Karthikeyan Ramasubramanian |
2021-05-05 | mb/google/guybrush: Fix S0i3/S3 GPIO configuration | Raul E Rangel |
2021-04-30 | mb/google/guybrush: Remove the GPIO_SIGN_OF_LIFE code | Martin Roth |
2021-04-30 | mb/google/guybrush: update the telemetry setting | Chris Wang |
2021-04-29 | mb/google/guybrush,mancomb: only print warning in mainboard_smi_gpi | Felix Held |
2021-04-29 | mb/google/guybrush: Configure Audio Co-processor | Karthikeyan Ramasubramanian |
2021-04-29 | mb/google/guybrush: Set system_config to 2 for guybrush boards | Martin Roth |
2021-04-27 | mb/google/guybrush: Fix EC SCI configuration | Raul E Rangel |
2021-04-26 | mb/google/guybrush: Add STAPM values to overridetree | Martin Roth |
2021-04-26 | mb/google/guybrush: Enable S0i3 | Karthikeyan Ramasubramanian |
2021-04-23 | mb/google/guybrush: Update memory configuration | Martin Roth |
2021-04-22 | guybrush: Increase eSPI bus frequency to 33Mhz | Rob Barnes |
2021-04-22 | guybrush: Add Kconfig for PSP eSPI and port80 | Rob Barnes |
2021-04-19 | Revert "mb/google/guybrush: Enable early EC Software Sync" | Karthikeyan Ramasubramanian |
2021-04-18 | mb/google/guybrush/var/guybrush: Add GPIO override table | Karthikeyan Ramasubramanian |
2021-04-18 | mb/google/guybrush: Enable AMD I2S Machine Driver | Karthikeyan Ramasubramanian |
2021-04-18 | mb/google/guybrush/var/guybrush: Add FPMCU configration | Ivy Jian |
2021-04-16 | mb/google/guybrush: Enable backlight in the OS | Martin Roth |
2021-04-16 | soc/amd/cezanne: Add uart controllers to chipset.cb | Ivy Jian |
2021-04-16 | mb/google/guybrush: Implement tis_plat_irq_status | Raul E Rangel |
2021-04-16 | mb/google/{guybrush,mancomb}: Add VBOOT_VBNV_OFFSET | Raul E Rangel |
2021-04-16 | mb/google/guybrush: Sort VBOOT_EARLY_EC_SYNC | Raul E Rangel |
2021-04-15 | mb/google/guybrush,mancomb: include soc/gpio.h in baseboard/gpio.h | Felix Held |
2021-04-15 | mb/google/guybrush,mancomb: use EC_SCI_GPI in espi_sci_sources struct | Felix Held |
2021-04-08 | mb/amd,google: use PAD_NF_SCI for GPIO_2 config in soc/amd based boards | Felix Held |
2021-04-08 | mb/google/guybrush: Unmask eSPI keyboard IRQ | Raul E Rangel |
2021-04-08 | mb/google/guybrush: Remove PS/2 mouse config | Raul E Rangel |
2021-04-08 | mb/google/guybrush: PCIe GPIOs - enable enables, disable resets | Martin Roth |
2021-04-07 | mb/google/guybrush/port_descriptors: add dummy descriptors | Felix Held |
2021-04-07 | mb/google/guybrush: Add aux PCIe reset GPIOs to dxio descriptors | Martin Roth |
2021-04-07 | mb/google/guybrush: add DXIO and DDI descriptors | Felix Held |
2021-04-07 | soc/amd/cezanne: Pass DXIO and DDI Descriptors to FSP | Matt Papageorge |
2021-04-06 | Revert "mb/google/guybrush: Disable GFX" | Raul Rangel |
2021-04-06 | mb/google/guybrush: Disable GFX | Raul E Rangel |
2021-04-05 | mb/google/guybrush/var/guybrush: Add Codec and Speaker configration | Karthikeyan Ramasubramanian |
2021-04-05 | mb/google/guybrush: Add Bluetooth configuration | Karthikeyan Ramasubramanian |
2021-04-05 | mb/google/guybrush: Enable camera power GPIO | Ivy Jian |
2021-04-05 | mb/google/guybrush: Update GPIO configuration | Martin Roth |
2021-04-02 | mb/google/guybrush: Enable early EC Software Sync | Karthikeyan Ramasubramanian |
2021-04-02 | mb/google/guybrush: Add Elan Touchpad configuration | Karthikeyan Ramasubramanian |
2021-04-01 | mb/google/guybrush: Add IRQ numbers | Raul E Rangel |
2021-03-31 | mb/google/guybrush: Enable VBOOT_LID_SWITCH | Raul E Rangel |
2021-03-31 | mb/google/guybrush: Switch eSPI to 16 MHz | Raul E Rangel |
2021-03-29 | mb/google/guybrush: select DISABLE_KEYBOARD_RESET_PIN | Felix Held |
2021-03-29 | mb/google/guybrush: Enable DISABLE_SPI_FLASH_ROM_SHARING | Raul E Rangel |
2021-03-24 | mb/google/guybrush: Temporary fix to set eSPI mux | Mathew King |
2021-03-24 | mb/google/guybrush: disable KBRSTEN | Kangheui Won |
2021-03-22 | mb/google/guybrush: Enable AP <-> H1 communication | Karthikeyan Ramasubramanian |
2021-03-22 | mb/google/guybrush: Add initial I2C configuration | Karthikeyan Ramasubramanian |
2021-03-18 | mb/google/guybrush: Add eSPI GPIO back to init table | Mathew King |
2021-03-18 | mb/google/guybrush: Configure UART0 gpio in early stage | Mathew King |
2021-03-16 | mb/google/guybrush: Add initial fch irq routing | Mathew King |
2021-03-15 | mb/google/guybrush: Enable eSPI VW SCI events | Mathew King |
2021-03-14 | mb/google/guybrush: Enable PCIe devices in devicetree | Mathew King |
2021-03-14 | mb/google/guybrush: Add SPDs into build | Martin Roth |
2021-03-14 | mb/google/guybrush: Enable EM100 support on guybrush | Mathew King |
2021-03-13 | mb/amd/majolica,google/guybrush,google/mancomb: select HAVE_ACPI_RESUME | Raul E Rangel |
2021-03-13 | mb/google/guybrush: Add guybrush APCBs into build | Martin Roth |
2021-03-13 | mb/google/guybrush: Add ACPI support for Chrome EC | Mathew King |
2021-03-13 | mb/google/guybrush: Configure eSPI GPIOs in early stage | Mathew King |
2021-03-13 | mb/google/guybrush: Configure early GPIOs in earliest stage | Mathew King |
2021-03-13 | mb/google/guybrush: Enable verstage | Mathew King |
2021-03-11 | mb/google/guybrush: Enable USB ports in devicetree | Mathew King |
2021-03-11 | mb/google/guybrush: Enable Chrome EC SKUID and BOARDID | Mathew King |
2021-03-11 | mb/google/guybrush: Log mainboard events to elog | Mathew King |
2021-03-10 | mb/google/guybrush: Add chomeec device to lpc bridge | Mathew King |
2021-03-10 | mb/google/guybrush: Add smihandler | Mathew King |
2021-03-10 | mb/google/guybrush: Enable Chrome EC | Mathew King |
2021-03-08 | mb/google/guybrush: Enable internal graphics | Mathew King |
2021-03-03 | mb/google/guybrush: Add SPDs to build for Guybrush variant | Martin Roth |
2021-03-03 | mb/google/guybrush: Add generated LPDDR4x SPDs | Martin Roth |
2021-03-02 | mb/google/guybrush: Set up FW_CONFIG fields | Mathew King |
2021-03-02 | mb/google/guybrush: Add eSPI configuration | Mathew King |
2021-03-02 | mb/google/guybrush: Add option to toggle GPIO for sign of life | Mathew King |
2021-02-22 | mb/google/guybrush: Enable console UART | Mathew King |
2021-02-22 | mb/google/guybrush: Enable guybrush variant | Mathew King |
2021-02-22 | mb/google/guybrush: Enable ACPI tables | Mathew King |
2021-02-19 | mb/google/guybrush: Enable CONFIG_CHROMEOS | Mathew King |
2021-02-15 | mb/google/guybrush: Configure non-native function GPIOs | Mathew King |
2021-02-13 | mb/google/guybrush: Add plain dsdt | Raul E Rangel |
2021-02-06 | mb/google/guybrush: First pass GPIO configuriation for Guybrush | Mathew King |
2021-02-06 | mb/google/guybrush: Add stubs to configure GPIOs | Mathew King |