summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru
AgeCommit message (Expand)Author
2021-09-16vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_mainHsuan Ting Chen
2021-07-26mb/*: Specify type of `DEVICETREE` onceAngel Pons
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
2021-02-21mb/: Drop the provided name in chip_opsKyösti Mälkki
2020-12-02cbfs: Simplify load/map API names, remove type argumentsJulius Werner
2020-06-13treewide: Add Kconfig variable MEMLAYOUT_LD_FILEFurquan Shaikh
2020-05-18mainboard/*/*/*.cb: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-18mainboard/*/*/Kconfig*: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
2020-04-06mb/google/gru: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
2019-11-28mb/*/*/Kconfig: Drop redundant redeclaration of MAINBOARD_VENDORArthur Heymans
2019-11-28mainboard/google: Remove unused include <stdlib.h>Elyes HAOUAS
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
2019-09-30mb: remove test-only HWIDsHung-Te Lin
2019-09-14arm64: Uprev Arm TF and adjust to BL31 parameter changesJulius Werner
2019-05-13mainboard: remove "recovery" gpio, selectively add "presence" gpio.Matt Delco
2019-04-23src: Use include <console/console.h> when appropriateElyes HAOUAS
2019-04-11chromeos: clean up "recovery" and "write protect" GPIOsJoel Kitching
2019-04-01assert: Make dead_code() work at link-time instead of compile-timeJulius Werner
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
2019-02-22symbols.h: Add macro to define memlayout region symbolsJulius Werner
2018-11-21(console,drivers/uart)/Kconfig: Fix dependenciesNico Huber
2018-11-16mb/*/*/Kconfig: Don't specify devicetree path if default val usedPeter Lemenkov
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
2018-10-22soc/rockchip/rk3399: Convert to `board_reset()`Nico Huber
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
2018-05-22rk3399: Enable bootblock compressionJulius Werner
2018-05-08mb/google: Get rid of device_tElyes HAOUAS
2018-05-04mainboard/google: Comment variant names in KconfigMartin Roth
2018-04-17cbfs: Add cbfs_boot_load_file()T Michael Turney
2018-03-08google/scarlet: Adjust K&D power sequence from softwareBrian Norris
2018-02-16google/gru: Fix GPIO_WP pull and polarity for ScarletJulius Werner
2018-02-06google/gru: Add another 512KB to the COREBOOT FMAP regionJulius Werner
2018-02-02google/gru: Use newer version of Innolux P097PFG panel init codeLin Huang
2018-01-29google/scarlet: Add initialization sequence for Innolux P097PFG panelLin Huang
2018-01-29rockchip/rk3399: Support LONG_WRITE type in MIPI DSILin Huang
2018-01-18security/tpm: Change TPM naming for different layers.Philipp Deppenwiese
2018-01-18security/tpm: Move tpm TSS and TSPI layer to security sectionPhilipp Deppenwiese
2018-01-08google/gru: switch to spi2 for all scarlet based boardsEge Mihmanli
2017-12-20google/gru: Adjust to incorrect strapping resistors on KevinJulius Werner
2017-12-20google/gru: Prettify strapping ID ADC tableJulius Werner
2017-12-12google/scarlet: support INNOLUX P097PFG panelLin Huang
2017-12-11google/gru: Stop mucking with unused I2S0 pins in codec configJulius Werner
2017-12-11google/gru: Change Scarlet SKU ID pins to pull-upsJulius Werner
2017-12-07google/scarlet: update Kingdisplay kd097d04 timingLin Huang
2017-12-07google/gru: Add SKU ID for ScarletJulius Werner
2017-12-07boardid: Switch from Kconfig to weak functionsJulius Werner
2017-12-07boardid: Minor clean up and standardizationJulius Werner
2017-12-05google/gru: update RAMID tableLin Huang
2017-11-28google/scarlet: support kd097d04 panelLin Huang
2017-11-28google/gru: correct backlight gpioLin Huang
2017-11-28rockchip/rk3399: support dual mipi dsiLin Huang
2017-11-22google/gru: Add support for rainierEge Mihmanli
2017-11-20google/gru: Add config for scarlet-derived boardsEge Mihmanli
2017-11-17mb/google: Add Chromebook marketing namesJonathan Neuschäfer
2017-11-06gru: Fix and export SPK_PA_EN GPIO for ScarletJulius Werner
2017-10-02google/gru: Fix pmu1833_volsel handlingJulius Werner
2017-09-06google/gru: Re-enable 3V rail GPIO on ScarletJulius Werner
2017-08-31google/gru: Support Nefario rev0Philip Chen
2017-08-18include/device: Split i2c.h into threeNico Huber
2017-08-06rockchip: gpio: add gpio_pull argument in gpio_input_irq() functionLin Huang
2017-08-01google/gru: Correct Scarlet pwm regulator minimum value and maximum valueLin Huang
2017-08-01google/gru: Correct the Sdcard control gpio setting for ScarletLin Huang
2017-08-01google/gru: Use 1.8V powerdomain for gpio4cd on ScarletLin Huang
2017-07-19google/gru: Add support for Scarlet rev1Julius Werner
2017-07-19rockchip/rk3399: Adjust gpio_t format to match ARM TFJulius Werner
2017-07-12google/gru: Add NefarioPhilip Chen
2017-06-19rockchip/rk3399: fix DRAM gate training issueLin Huang
2017-06-15google/gru: drive the stronger pull-up for touchpadCaesar Wang
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
2017-05-18google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
2017-05-11google/gru: support 800M/928M frequency for bobCaesar Wang
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
2017-05-05Revert "google/scarlet: Enable innolux,p079zca MIPI panel"Martin Roth
2017-05-05google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
2017-04-28google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irqJeffy Chen
2017-04-25google/gru: change the sd power sequenceCaesar Wang
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
2017-04-19google/gru: change kevin boot-time center logic voltage to 925mVDouglas Anderson
2017-04-19google/gru: change center logic voltage to 900mVDerek Basehore
2017-04-11scarlet/gru: skip display because mipi driver not readyShunqian Zheng
2017-04-06gru: Initialize I2C bus for ARC2C0608Philip Chen
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
2017-03-09drivers/spi/tpm: provide Kconfig to indicate CR50 usageAaron Durbin
2017-03-07google/gru: add MAX_SDRAM_FREQ config to choose max ddr freqShunqian Zheng
2017-02-23google/gru: whitespace fixPatrick Georgi
2017-02-23google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection thresholdWilliam wu
2017-02-23google/gru: update the pwm regulatorCaesar Wang
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 12:47:38 +0000