Age | Commit message (Expand) | Author |
2017-04-27 | mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c device | Wei-Ning Huang |
2017-04-24 | mainboard/google/eve: Remove DRIVER_TPM_I2C_IRQ | Daniel Kurtz |
2017-04-24 | mainboard/google/eve: Add TPM_TIS_ACPI_INTERRUPT | Daniel Kurtz |
2017-04-24 | Kconfig: provide MAINBOARD_HAS_TPM_CR50 option | Aaron Durbin |
2017-04-20 | mainboard/google/eve: Set touchpad IRQ to level triggered | Duncan Laurie |
2017-04-15 | mainboard/google/eve: Remove 'probed' setting from rt5663 codec | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Remove ACPI ALS device | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Set UART0 to skip initialization in FSP | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Enable internal pull-down on USB_C{0,1}_DP_HPD | Duncan Laurie |
2017-04-13 | google/eve: Disable Deep S3 in AC mode | Duncan Laurie |
2017-04-13 | google/eve: Enable WiFi SAR feature | Duncan Laurie |
2017-04-13 | soc/intel/skylake: Split AC/DC settings for Deep Sx config | Duncan Laurie |
2017-04-11 | google/eve: Limit memory SKU 5 to 1600MHz | Duncan Laurie |
2017-04-10 | google/eve: Update I2C bus timing | Duncan Laurie |
2017-03-28 | vboot: Move remaining features out of vendorcode/google/chromeos | Julius Werner |
2017-03-28 | vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by default | Julius Werner |
2017-03-16 | google/eve: Use rt5663 interrupt as GpioInt instead of PIRQ | Duncan Laurie |
2017-03-15 | google/eve: Update MCU GPIOs configuration | Vincent Palatin |
2017-03-15 | google/eve: Apply default AC/DC loadline settings | Duncan Laurie |
2017-03-15 | intel/skylake: Fix bug in VR configuration with FSP 2.0 | Duncan Laurie |
2017-03-15 | google/eve: Use rt5514 instead of 4ch DMIC | Duncan Laurie |
2017-03-08 | google/eve: Configure GPIOs for new board | Duncan Laurie |
2017-02-25 | google/eve: Add rise/fall times for I2C buses | Duncan Laurie |
2017-02-22 | acpi: Add ACPI_ prefix to IRQ enum and struct names | Furquan Shaikh |
2017-02-20 | drivers/i2c: Use I2C HID driver for wacom devices | Furquan Shaikh |
2017-02-20 | google/eve: Set touchscreen I2C bus speed to 1MHz | Duncan Laurie |
2017-02-20 | google/eve: Add audio devices | Duncan Laurie |
2017-02-20 | mainboard/{google,intel}: Change config option selection | Furquan Shaikh |
2017-02-20 | google/eve: Set rise/fall timing values for I2C bus 1 | Duncan Laurie |
2017-02-20 | google/eve: Fix FPC support | Duncan Laurie |
2017-02-17 | mainboard/eve: select SOC_INTEL_KABYLAKE | Rizwan Qureshi |
2017-02-16 | mainboard/google/eve: Generate FPC device using SPI SSDT generator | Furquan Shaikh |
2017-02-14 | google/eve: change touchpad HID | Wei-Ning Huang |
2017-02-07 | google/eve: Add support for tablet mode switch. | Gwendal Grignou |
2017-02-05 | google/eve: Fix keyboard backlight enable in wake from G3 | Duncan Laurie |
2017-02-04 | google/eve: Fix DRAM DQS map | Duncan Laurie |
2017-02-04 | google/eve: Set GPIO GPP_D22 high | Duncan Laurie |
2017-01-24 | google/eve: Enable PD MCU device | Duncan Laurie |
2017-01-22 | google/eve: Fixes for devicetree settings | Duncan Laurie |
2017-01-22 | google/eve: Enable separate recovery MRC cache | Duncan Laurie |
2017-01-22 | google/eve: Enable keyboard backlight in bootblock | Duncan Laurie |
2017-01-20 | google/eve: Adjust DPTF parameters | Duncan Laurie |
2017-01-20 | google/eve: Enable ACPI keyboard backlight | Duncan Laurie |
2017-01-20 | google/eve: Enable pull-up on ACPRESENT | Duncan Laurie |
2016-12-26 | google/eve: Enable internal pull-up on PWRBTN# | Duncan Laurie |
2016-12-20 | google/eve: Fix configuration of some GPIOs | Duncan Laurie |
2016-12-16 | google/eve: Set throttle offset to 10 degrees | Duncan Laurie |
2016-12-16 | google/eve: Enable touch devices | Duncan Laurie |
2016-12-16 | google/eve: Enable native mode for UART pins in bootblock | Duncan Laurie |
2016-12-14 | google/eve: Configure I2C3 pins as GPIO inputs | Duncan Laurie |
2016-12-08 | google/eve: Add ASL code to describe SPI FPC1020 controller | Duncan Laurie |
2016-12-05 | mainboard & southbridge: Clear files that are just headers | Martin Roth |
2016-11-28 | soc/intel/skylake: Add USB Port Over Current (OC) Pin programming | Subrata Banik |
2016-11-22 | Remove explicit select MMCONF_SUPPORT | Kyösti Mälkki |
2016-11-18 | google/chromeec: Add common infrastructure for boot-mode switches | Furquan Shaikh |
2016-11-16 | google/eve: Fill out memory ID table | Duncan Laurie |
2016-11-11 | soc/intel/skylake: move i2c voltage config to own variable | Aaron Durbin |
2016-11-01 | google/eve: Add new board | Duncan Laurie |