summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya/variants
AgeCommit message (Expand)Author
2022-01-27mb/google/brya/variants/volmar: Init devicetree for volmarDavid Wu
2022-01-27mb/google/brya/var/brask: set tcc_offset value to 10℃David Wu
2022-01-26Revert "mb/google/brya/var/brask: Configure the ISOLATE pin of LAN"Alan Huang
2022-01-26mb/google/brya/var/kano: Reduce reset delay time to 20ms for ELAN TSDavid Wu
2022-01-25mb/google/brya/var/taniks: Modify DPTF settings for taniksJoey Peng
2022-01-25mb/google/brya/var/taniks: swap TPM i2c with TS i2c for next buildJoey Peng
2022-01-25mb/google/brya/var/taniks: Run time probe for NVMe SSD and MMCJoey Peng
2022-01-25soc/intel/adl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
2022-01-25mb/google/brya/var/volmar: Enable EC keyboard backlightDavid Wu
2022-01-25mb/google/brya/variants/volmar: Configure GPIOs according to schematicsDavid Wu
2022-01-24mb/google/brya/var/banshee: update overridetreeIvy Jian
2022-01-24mb/google/brya/var/{taeko, taeko4es}: Modify touchpad i2c signalJoey Peng
2022-01-21mb/google/brya/var/gimble{4es}: Decrease touchscreen T3 timing to 200msScott Chao
2022-01-21mb/google/brya/var/kano: Prevent camera LED blinking during bootJim Lai
2022-01-20mb/google/brya/var/banshee: update gpio settingsIvy Jian
2022-01-20mb/google/brya/var/banshee: Add SODIMM supportEric Lai
2022-01-20mb/google/brya: Create banshee variantIvy Jian
2022-01-19mb/google/brya/var/{taeko, taeko4es}: Add gpio.c in romstageKevin Chang
2022-01-18mb/google/brya/var/brask: Turn on I2C1 for TPMAlan Huang
2022-01-17mb/google/brya/variants/*: Add cpu pcie rp flagsTracy Wu
2022-01-17mb/google/brya/var/agah: update gpio overrideTony Huang
2022-01-14mb/google/brya/var/redrix{4es}: Add host device event supportWisley Chen
2022-01-14mb/google/brya/var/redrix{4es}: Set tcc_offset value to 3Wisley Chen
2022-01-14mb/google/brya/var/anahera{4es}: Set tcc_offset value to 3Wisley Chen
2022-01-14mb/google/brya/var/felwinter: Update USB Type-C PLDEric Lai
2022-01-14mb/google/brya/var/felwinter: Update audio_amp fw config field nameEric Lai
2022-01-14mb/google/brya0: Enable CNVi DDR RFIM for brya0 variantRonak Kanabar
2022-01-14mb/google/brya/var/agah: update overridetreeTony Huang
2022-01-13mb/google/brya/var/felwinter: Update ELAN touch HIDEric Lai
2022-01-12mb/google/brya/var/taeko: Modify power sequence for SSD deviceKevin Chang
2022-01-12mb/google/brya: Move gpio_pm settings for brya variants to baseboardsTim Wawrzynczak
2022-01-11mb/google/brya/var/volmar: Generate SPD ID for supported partsDavid Wu
2022-01-10src/mainboard/google: Remove unused <console/console.h>Elyes HAOUAS
2022-01-10mb/google/brya/var/brask: Update PL and PsysPLCurtis Chen
2022-01-10mb/google/brya/var/vell: Enable SaGvRobert Chen
2022-01-10mb/google/brya: Create volmar variantDavid Wu
2022-01-10mb/google/brya/var/agah: move memory makefile to correct pathTony Huang
2022-01-07mb/google/brya/var/vell: Add MIPI camera infoShon Wang
2022-01-07mb/google/brya/var/vell: Swap TPM I2C with touchscreen I2CShon Wang
2022-01-07mb/google/brya/var/taniks: Change probe for audio 4 channel speakerJoey Peng
2022-01-07mb/google/brya/var/redrix: Tune I2c frequencyWisley Chen
2022-01-07mb/google/brya/var/anahera: Fine tune I2C frequencyWisley Chen
2022-01-07mb/google/brya/anahera: Swap TPM I2C with touchscreen I2CWisley Chen
2022-01-07mb/google/brya/anahera{4es}: Correct WWAN power sequenceWisley Chen
2022-01-07mb/google/brya/anahera{4es}: Correct SSD power sequenceWisley Chen
2022-01-07mb/google/brya/var/brask: Change TPM I2C to I2C1Zhuohao Lee
2022-01-06mb/google/brya/var/anahera{4es}: Add Chrome OS privacy screen _HIDTim Wawrzynczak
2022-01-06mb/google/brya/var/agah: Add new memory supportTony Huang
2022-01-06mb/google/brya: Create agah variantTony Huang
2022-01-05mb/google/brya/var/taeko:Remove duplicate DB_SD fw_config fields.Joey Peng
2022-01-05mb/google/brya/var/primus: Fix some GPIO programmingAriel Fang
2022-01-04mb/google/brya/var/kano: Add stylus probeDavid Wu
2022-01-04mb/google/brya/var/kano: Enable stylus pen powerDavid Wu
2022-01-04mb/google/brya: Add new baseboard nissa with variants nivviks and nereidReka Norman
2022-01-04mb/google/brya/var/taeko: Run-time probe for NVMe SSD and MMCKevin Chang
2022-01-04src/mb: Remove unused <string.h>Elyes HAOUAS
2022-01-04mb/google/brya/var/taeko: Modify DPTF setting for taekoKevin Chang
2022-01-04mb/google/brya/var/taeko: swap TPM i2c with TS i2c for the next buildKevin Chang
2022-01-04mb/google/brya/var/kano: Set vGPIO reset typeDavid Wu
2022-01-04mb/google/brya/anahera: Add new memory supportWisley Chen
2022-01-04mb/google/brya/var/redrix: Add new memory supportWisley Chen
2022-01-04mb/google/brya/var/vell: update overridetree for DPShon Wang
2022-01-03mb/google/brya/var/brask: Change I2C/DDC signalsRory Liu
2022-01-03mb/google/brya/var/gimble: Update Slow Slew RateMark Hsieh
2021-12-26mb/google/brya/var/taeko4es: Set vGPIO reset typeJoey Peng
2021-12-24mb/google/taniks,vell;mb/intel/adlrvp_n_ext_ec: fix build errorFelix Held
2021-12-23mb/google/brya/var/brask: Customize LEDs of RT8125Rory Liu
2021-12-23mb/google/brya/var/vell: Add Hynix LP5 DRAM supportKevin Chiu
2021-12-23mb/google/brya/variants/primus: remove board_id check for ALC5682I-VSMalik_Hsu
2021-12-23mb/google/brya/var/gimble4es: Configure Acoustic noise mitigationMark Hsieh
2021-12-23mb/google/brya/var/anahera: Enable SaGvWisley Chen
2021-12-23mb/google/brya/var/taeko4es: Fix PLD group order (W/A)Joey Peng
2021-12-23drivers/intel/pmc_mux/conn: Change usb{23}_port_number fields to device pointersReka Norman
2021-12-23mb/google/brya/var/vell: update overridetree for SSD setting=
2021-12-23mb/google/brya/var/vell: update overridetree for touchpad=
2021-12-22mb/google/brya/var/gimble: Configure GPIO to release PERST# earlierMark Hsieh
2021-12-21mb/google/brya/variant/taniks: Add devicetree settingsJoey Peng
2021-12-20mb/google/brya/var/brask: Add wake-on-lan functionRory Liu
2021-12-20mb/google/brya/var/vell: update memory settingsShon Wang
2021-12-20mb/google/brya/var/vell: update gpio overrideKevin Chiu
2021-12-20mb/google/brya/var/*: Add disable_gpio_export_in_crs to all devicetreesTim Wawrzynczak
2021-12-20mb/google/brya/var/primus: Update thermal table for primusAriel_Fang
2021-12-20mb/google/brya/variants/brask: Disable autonomous GPIO power managementZhuohao Lee
2021-12-16mb/google/brya/var/felwinter: Add stylus probe for garageEric Lai
2021-12-16mb/google/brya/var/vell: update overridetreeKevin Chiu
2021-12-15mb/google/brya/var/primus{4es}: Configure Acoustic noise mitigationCasper Chang
2021-12-15mb/google/brya/variant/taniks: Add memory settingsJoey Peng
2021-12-15mb/google/brya/variants/taniks: Configure GPIOs according to schematicsJoey Peng
2021-12-10mb/google/brya/var/taeko: Fix PLD group order (W/A)Kevin Chang
2021-12-10mb/var/gimble4es: Set PsysPmax to 143 WMark Hsieh
2021-12-09mb/google/brya4es: sync change from brya0 (CB:58374)YH Lin
2021-12-09mb/google/brya/var/brask: Configure the ISOLATE pin of LANAlan Huang
2021-12-09mb/google/brya/var/redrix4es: sync change from redrixYH Lin
2021-12-08mb/google/brya/var/primus: Fix PLD group orderScott Chao
2021-12-07mb/google/brya: add list of gpios to lockNick Vaccaro
2021-12-06mb/google/brya/var/gimble: Configure Acoustic noise mitigationMark Hsieh
2021-12-06mb/google/brya/var/redrix: Swap TPM I2C with touchscreen I2CWisley Chen
2021-12-06mb/var/gimble: Set PsysPmax to 143 WChia-Ling Hou
2021-12-06mb/google/brya/var/felwinter: Correct garage wake eventEric Lai
2021-12-03mb/google/brya/var/felwinter: Add WiFi SAR table for felwinterIan Feng
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 16:43:40 +0000