summaryrefslogtreecommitdiff
path: root/src/mainboard/clevo/cml-u
AgeCommit message (Collapse)Author
2022-11-15mb/clevo/cml-u: Fix CMOS optionsAngel Pons
The `hyper_threading` CMOS option was hooked up to the wrong enumeration and lacked a default value in `cmos.default`. Thus, use the correct enum for the `hyper_threading` option, remove the now-unused "backwards" enum and provide a default value in `cmos.default`. Change-Id: I56b0320f9210cde8ff58db176d2b7d2207c98aa9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69521 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-11mb/clevo/l140cu: make use of the new clevo/it5570e ec driverMichael Niewöhner
Hook up the new EC driver. Tested: - Fn hotkeys work (brightness, display, volume, tp toggle, ...) - Display lid - Sleep/wake - Camera (including Fn toggle) - Bluetooth (both CNVi and PCIe card) - Wi-Fi (both CNVi and PCIe card) - CMOS options Known issues: - Touchpad toggle needs OS setup; see CB:68791 - UCSI is not implemented; see CB:68791 Change-Id: I28ac401ada2945bb58fe862895458b10fed505fe Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68795 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-11mb/clevo/l140cu: drop System76 ECMichael Niewöhner
Drop System76 EC, since the ODM board does not use it. Clevo EC FW support will be added and hooked up cleanly in the follow-up changes. Change-Id: I06abbde238be6d25842472a6a82159413ab52ef5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59816 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02mb/clevo/l140cu: work around PECI staying high when idle, blocking s0ixMichael Niewöhner
According to Intel doc# 575683 the PECI bus should be low when idle and is pulled up by clients with strong drive. However, for unknown reasons the bus stays high on this board, blocking s0ix entry. The PECI reference schematic in the ASPEED AST2400 BMC datasheet (actually not related to this board) says that a pull-down is *required* for the idle state. This might be just a requirement of this BMC, since this is nowhere documented in Intel datasheets, schematics or elsewhere. However, configuring a weak pull-down (20 k) on the PECI pad indeed solves this problem for now. Change-Id: Ib5a6b0ad3553c2cf795037d6a1982102bcb04644 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68793 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02mb/clevo/l140cu: enable S0ixMichael Niewöhner
Enable S0ix for the board, as done in vendor fw. Change-Id: Ifdf93e1e599e7cc03fc02297eafb49d34b1f6172 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68792 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-09mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flagMatt DeVillier
Historically, ChromeOS devices have worked around the problem of OEMs using several different parts for touchpads/touchscreens by using a ChromeOS kernel-specific 'probed' flag (rejected by the upstream kernel) to indicate that the device may or may not be present, and that the driver should probe to confirm device presence. Since c636142b, coreboot now supports detection for i2c devices at runtime when creating the device entries for the ACPI/SSDT tables, rendering the 'probed' flag obsolete for touchpads. Switch all touchpads in the tree from using the 'probed' flag to the 'detect' flag. Touchscreens require more involved power sequencing, which will be done at some future time, after which they will switch over as well. TEST: build/boot at least one variant for each baseboard in the tree. Verify touchpad works under Linux and Windows. Verify only a single touchpad device is present in the ACPI tables. Change-Id: I47c6eed37eb34c044e27963532e544d3940a7c15 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67305 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-23soc/intel/cannonlake: Set MAX_CPUS based on the SoC and PCHFelix Singer
Set the default value for MAX_CPUS in the SoC config and drop it from the mainboards where it is set to those values. Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-16ec/system76/ec: Provide charging thresholds by defaultTim Crawford
Battery charging thresholds are a firmware implementation and not dependent on any hardware. It is expected that all boards using System76 EC firmware will select this option, so enable it by default. Leave it disabled on clevo/cml-u, which didn't have it selected. Change-Id: Id99d36eaf055a76b9e1eb732174017651de299a5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-09-03src/*: Specify type of `DIMM_MAX` onceAngel Pons
Specify the type of the `DIMM_MAX` Kconfig symbol once. Change-Id: I2e86baaa8bd50c7b82c399fde5dcea05da6b4307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-08-28soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by defaultFelix Singer
Since all mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, make it the default by changing its enum value to 0 and remove its configuration from all related devicetrees. If `common_soc_config.chipset_lockdown` is not configured with something else in the devicetree, then `CHIPSET_LOCKDOWN_COREBOOT` is used. Also, add a release note for the upcoming 4.15 release. Change-Id: I369f01d3da2e901e2fb57f2c83bd07380f3946a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `DEVICETREE` onceAngel Pons
Specify the type of the `DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If68f11a5ceaa67a3e8218f89e1138c247ebb9a25 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56555 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-29Kconfig: Escape variablesPatrick Georgi
New kconfig parsers interpret $(var) themselves, leading to empty fields. Old kconfig understands \$(var), so use that. Change-Id: I927fc9dc7a66211bfe51d4324cf7c51b555ea3a8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55912 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-24mb/clevo/cml-u/cmos.layout: Align contents with tabsAngel Pons
Replace spaces with tabs for consistency with other mainboards. Change-Id: Ia4042ecf7c62490b0a50bc42d5ddddd5872bf036 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52633 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-22soc/intel/cannonlake: Set DIMM_SPD_SIZE to 512Felix Singer
All related mainboards are setting DIMM_SPD_SIZE to 512. Therefore, default to 512 in the SoC Kconfig and drop it from related mainboard Kconfigs. Change-Id: Idb6a0e42961eeb490afd76b4aa7d940961991733 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52513 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19mb/clevo/cml-u/Kconfig: Use BOARD_CLEVO_L140CU_BASEFelix Singer
To make the L140CU able to be selected by other OEMs, use BOARD_CLEVO_L140CU_BASE for OEM independent options. BOARD_CLEVO_L140CU represents the standard Clevo mainboard without any OEM modifications, while BOARD_CLEVO_L140CU_BASE is used for the baseboard. Change-Id: Iee82eadebfc851619dbb64de09283c5ee55a499f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52241 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19mb/clevo/cml-u: Rename `BOARD_CLEVO_L140CU_OPTIONS`Felix Singer
Rename `BOARD_CLEVO_L140CU_OPTIONS` to `BOARD_CLEVO_L140CU_BASE` to make clear that this option represents the baseboard. Change-Id: I76690626fddafc8e3c37ef760aeb4f064fb6b591 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52480 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-19mb/clevo/l140cu: Move FSP-M config hook to mainboard levelFelix Singer
Hook up FSP-M configuration on mainboard level instead of variant level being able to do common configuration there. Also, hook up variant romstage.c on mainboard level for variant specific configurations. Change-Id: Ic161f83cb629b1e70ca670e10975a25bc0949656 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-16mb/clevo/cml-u/l140cu: correct pad GPP_A11 (INTP_OUT)Michael Niewöhner
This pad is connected to INTP_OUT of the Type-C PD controller. Correct the comment. Also remove the unneeded pull-up. Checked with schematics. Change-Id: I33a5f177affc3f13d091a85073499b7283f54ada Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-04-13mb/clevo/cml-u: drop LPC generic range for port 80Michael Niewöhner
Port 80 (actually 0x80-0x8f) is a fixed I/O range and thus does not have to be set up as generic range. Drop the entry from clevo/cml-u, which has been forgotten in commit c5f1dc9. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I05844db4cfe96e6075bd6526ffc242973a2082c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-04-08soc/intel/{cannonlake,icelake}: Drop unhooked `SendVrMbxCmd`Angel Pons
This option's value is not used anywhere. Remove it. Change-Id: I0f30cddd30d459f48b51f377b111bbc04709c5f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-06mb/clevo/cml-u: acpi: Remove unused EC defineTim Crawford
The define for color keyboard setting has never been used, as it was added as a Kconfig selection when ec/system76/ec was introduced. Change-Id: I6c8f17b398fb4645feb830c2ad28ac98fb744280 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-03-19mb/{clevo/cml-u,system76/lemp9}: Clarify `gen2_dec` useAngel Pons
This I/O range is for a PM channel on the EC, not the PCH PMC. Change-Id: I64422e537c1edcd0673cf87f16139fb117b10e75 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51604 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-04mb/clevo/cml-u/bootblock.c: Remove unused includesElyes HAOUAS
Change-Id: I048e906306bf77a941b5f731ade15292fa944390 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-27ACPI: Add top-level ASLKyösti Mälkki
Objects that are created with acpigen need to be declared with External () for the generation of dsdt.asl to pass iasl without errors. There are some objects that are common to all platforms, and some that should be declared only conditionally. Having a top-level ASL helps to achieve this. Change-Id: Ibaf1ab9941b82f99e5fa857c0c7e4b6192c74330 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-27mb/clevo: Drop redundant `select HAVE_SMI_HANDLER`Angel Pons
Already selected from SoC Kconfig. Change-Id: I131f435ab0a30e33a70773a99c60284f8b9c82c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-08mb/clevo/cml-u: Drop VGA_BIOS_FILE from KconfigFelix Singer
It doesn't make sense to configure that filename in Kconfig, since the filename can be changed by the user. So remove it. Change-Id: I3eed05637da29096bc1d134505d7335db5db1439 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49138 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-05mb/clevo/cml-u: Rework KconfigFelix Singer
Rework Kconfig file so that each variant has its own config option with their specific selects / configuration and move common selects to a seperate config option, which is used as base for each variant. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains the same. Change-Id: I1f5b6f535597149f28dd8c8322acc2e988f11505 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-04mb/clevo/cml-u: Configure IRQ as level triggered for HID over I2CMichael Niewöhner
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx [2] https://review.coreboot.org/c/coreboot/+/47417/2/src/mainboard/google/hatch/variants/baseboard/gpio.c#b182 Tested successfully on Clevo L141CU. Change-Id: Ia232c0a11546aa6d17614f4cab07c255e58f2fed Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-03mb/clevo/l140cu: add libgfxinit supportMichael Niewöhner
Change-Id: Id58bb2ce5fdaeaf158d02d8c812ab2c331db352d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48751 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-03mb/clevo/l140cu: add panel settings to the dt and hook up GMA ACPIMichael Niewöhner
Add the panel settings dumped from vendor firmware and hook up drivers/intel/gma, which will be required for brightness control. Keyboard brightness control still requires ACPI code. This will be done in a separate change later. Test: Panel gets enabled when the payload starts on Clevo L141CU. Change-Id: I7977a2271da72c142b025b4631318d1a39adfb13 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-23mb/clevo/cml-u: Reorder selects alphabeticallyFelix Singer
Change-Id: Idd02573e6b47c3bcbdcefa7b04fb9098b600df49 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-22mb/clevo/cml-u: move gpio early init to bootblock_mainboard_early_initMichael Niewöhner
Move gpio early init to bootblock_mainboard_early_init to make the bootblock console work as early as possible. Change-Id: I619f7d0e15adae284b606dd20c3c1f04f3eafd7b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48801 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22Revert "mb/clevo/cml-u: drop duplicated configuration of UART pads"Felix Singer
This reverts commit 1a0071c7115819302c7df3fa2c07b1ca971e515d. Reason for revert: UART pad configuration should not be done in common code, since it could cause short circuits if the user configures a wrong UART index. Change-Id: I6022935eaab748f82c6330be0729ff72f4880493 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-20mb/clevo/cml-u: drop duplicated configuration of UART padsMichael Niewöhner
UART pads already get configured in bootblock by the UART driver in soc code. Thus, drop the duplicated code from the mainboard. Tested successfully on Clevo L141CU. Change-Id: I05a459b0af79c75c31b1bb26ea1a1a40857ef9bf Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-12-08mb/*: Remove SATA mode config for CNL based mainboardsFelix Singer
SATA_AHCI is already the default mode for CNL based mainboards. Therefore, remove its configuration from all related devicetrees. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I814e191243224a4b021cd7d4c1b611316f1fd1a4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-08soc/intel/cannonlake: Align SATA mode names with soc/sklFelix Singer
Align the SATA mode names with soc/skl providing a consistent API. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I54b48462852d7fe0230dde0c272da3d12365d987 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-08mb/clevo/l140cu: Use lower-case hex valuesFelix Singer
Change-Id: I56a905980e5ae382c3488b9fddb9fab382efc1d6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48375 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/clevo/l140cu: Remove unnecessary device declarationsFelix Singer
Remove unnecessary device declarations and remove comments where SMBIOS slot descriptions are used. Change-Id: I3aa3f72de764889becdb0afeb2dac522385d70ef Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48373 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/clevo/l140cu: Use proper indentsFelix Singer
Use proper indents in the devicetree and align `end` keywords. Change-Id: Id6e6f4ad648a9bed35305b7a446744c6ed06a150 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48372 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08mb/clevo/l140cu: Make PCI devices P2SB and PMC hiddenFelix Singer
The PCI devices P2SB and PMC are hidden by the FSP. So instead turning them off, set their state to hidden being able to allocate ressources for them. Change-Id: Ie6e12f99b0a7ffb1c4831b3aa8705e911b677e88 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48371 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/*: Remove unnecessary selectsFelix Singer
Remove SOC_INTEL_COMMON_BLOCK_HDA from mainboards Kconfig since it is selected by their SoC soc/intel/cannonlake. Change-Id: I9597746a217575b42f6325998b948e16b452231a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48289 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-06mb/clevo/cml-u: Move mainboard/gpio.h to variant/gpio.hFelix Singer
Move mainboard/gpio.h to variant/gpio.h and rename its methods to make clear that these methods are implemented on variant level. Change-Id: I1ae9b54ed683000f65323b11747ce3280a1c7f2a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48296 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-23mb/clevo/cml-u: Get rid of gpio.h and use C files insteadFelix Singer
Split up gpio.h into two seperate compilation units, gpio.c and gpio_early.c, containing the complete configuration and a minimal configuration used in early stages. Tested on clevo/l140cu and it still boots. Change-Id: I5b056e8faac0c426a37501dbc175373c22dde339 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23mb/clevo/cml-u: Get rid of cnl_configure_pads()Felix Singer
Get rid of cnl_configure_pads() since it is a hack for the FSP. Instead, hook up to the mainboard_ops driver and configure the GPIOs using .init. Tested on clevo/l140cu and it still boots. Change-Id: I75dd15ab6d2b3b72b3ad0398df87b349fd00bc3c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23mb/clevo/cml-u: Move bootblock.c and ramstage.c to mb levelFelix Singer
Change-Id: Ifca49c656f259b08fb8ab47fe36e93c146f25266 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23mb/clevo/cml-u: Use include folder for header filesFelix Singer
Change-Id: I50be3d9b829f624cbe460060c40482047f39774c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23mb/clevo/cml-u: Move hda_verb.c to mainboard's MakefileFelix Singer
Move hda_verb.c from the variant's Makefile to the mainboard's Makefile, because every variant needs one. Change-Id: Ia94813f68620abcff48de4fdb117466c91f6863c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47820 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19mb/clevo/cml-u/l140cu: Extend Kconfig option text with L141CUFelix Singer
Extend the Kconfig option text of L140CU with L141CU since the hardware of both is equal. Change-Id: If0e5061fc345208688a678a4cdf7c5ecaf47c17d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-11-19mb/clevo/cml-u: Add comment to board selectionFelix Singer
Change-Id: I531865416b1bf9c5a73c809590059e7d7c8f373a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47715 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/clevo/cml-u: Fix up comment styleAngel Pons
Change-Id: Idefc15fec1d62d68d88e91c76f59e1a60a3996b6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47564 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12mb/clevo/l140cu: add CMOS layout and defaultsMichael Niewöhner
Add CMOS layout and defaults files and enable CMOS options in Kconfig. Test: changed loglevel setting, rebooted and checked the log. Change-Id: Ia1a27818b2d12fb7578189e5748b8073c8f928e3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46311 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
This change reorganizes the CNVi device entries in mainboard devicetree/overridetree and SoC chipset tree to make it consistent with how other SoC internal PCI devices are represented i.e. without a chip driver around the SoC controller itself. Before: chip drivers/wifi/generic register "wake" = "..." device pci xx.y on end end After: device pci xx.y on chip drivers/wifi/generic register "wake" = "..." device generic 0 on end end end Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-12mb/clevo/l140cu: clean up memcfgMichael Niewöhner
The DQ and DQS byte maps do not apply to DDR4 configurations, thus simply drop them. Also drop ECT, as it's already initialized to zero and can't be used on DDR4 anyway. Further, trim down all the meaningless and/or wrong comments. Change-Id: I32f1b7bb46eaaf0f0ecad1df310f5de988f64c85 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46249 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/clevo/l140cu: drop disabled SPD indicesMichael Niewöhner
Drop the disabled SPD indices from memcfg, since they're already initialized to 0. Change-Id: I6d88bdac17222c2c5c35439517fe0bea46744b2b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-10-12mb/clevo/l140cu: drop USE_LEGACY_8254_TIMERMichael Niewöhner
Drop USE_LEGACY_8254_TIMER, since it's not required anymore for booting grub, despite the comment. The issue was resolved upstream five years ago: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=d43a5ee65143f384357fbfdcace4258e3537c214 Test: - Boot EFI GRUB2 from TianoCore payload (Debian Live, Ubuntu installer) - Boot GRUB2 payload Change-Id: I5ce4f5168586bf305969b2e24b6ee895c8552749 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45960 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/clevo/l140cu: set PS/2 timeout for SeaBIOSMichael Niewöhner
The keyboard only works randomly, because SeaBIOS initializes PS/2 before the EC is ready. Set the PS/2 timeout for SeaBIOS to 500 ms, to wait for the EC before initializing the keyboard. Test: keyboard works fine. Change-Id: I2be75961035f04a7ffa6f7e1dbaabb1243b857f9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45959 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05soc/intel/common/block/acpi: Factor out common platform.aslSubrata Banik
This patch moves platform.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify _PIC method present inside common platform.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-02mb/clevo/l140cu: Add variant specific romstage.c to buildFelix Singer
While restructuring the mainboard directory, it was forgotten to add the variant specific romstage.c to the build. Therefore, add romstage.c to the Makefile fixing the raminit. Change-Id: I7afbf1574803128f7d62592eed2398c945334757 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45928 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-01mb/clevo/l140cu: Align comment with rest of the devicetreeFelix Singer
Change-Id: Idcaedd3d5b7e465644f79e5a882e42eff040fdbd Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-29mb/clevo/cml-u: drop PcieRpSlotImplemented for card readerMichael Niewöhner
PcieRpSlotImplemented should only be set to 1 for PCIe ports implementing a PCIe slot. Drop it for the on-board card reader. Change-Id: I22628b4d4a7e317a01e46a61b5cd7bb9ebf548a0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-28mb/clevo/cml-u/Kconfig: Remove MAINBOARD_SMBIOS_PRODUCT_NAMEElyes HAOUAS
MAINBOARD_SMBIOS_PRODUCT_NAME is duplicated. Change-Id: I011f83c4d4e0657256839db207bfd1517922744c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-25mb/clevo/cml-u: remove the duplicate WiFi PCIe device in devicetreeMichael Niewöhner
Change-Id: Ibb46bbf0c889bb8b3fd1a4c0331dc719baffc7a2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45678 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-25mb/clevo: Rename l140cu to cml-uFelix Singer
In addition to CB:45664, rename clevo/l140cu to clevo/cml-u being able to add more variants under a generic mainboard later. Change-Id: I9c16e24830ebb80752df302aa2e63d9df8edad95 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45665 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 19:38:29 +0000