| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Ie7afe77053a21bcf6a1bf314570f897d1791a620
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
To ensure the power button functions as expected in firmware ensure
that the EC is not in "S0ix supported OS" mode and expecting the
power button to be handled by the virtual button interface.
BUG=b:128409889
TEST=Verify that the power button works at the developer screen
when the system is rebooted from within Chrome OS. Also ensure
that it works when external warm reset signal is asserted by H1.
Change-Id: Ic323515e3b8be08bac4f0f82e25f2f78c2f22833
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Both tent mode (0x01) and tablet mode (0x02) should be considered tablet
mode by ChromeOS.
BRANCH=none
BUG=b:122052438
TEST=ChromeOS enters tablet mode when lid angle exceeds 180
Change-Id: I89ba8141350fc628c8cff89d5f33aa47c6ae6afe
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There are two known reverse-engineered ways to manage battery
thresholds.
This patch implements them and adds a way to enable them for
different mainboards.
Tested on W530 with 4.18.3-gentoo kernel and X220 with 4.20.11.
Works fine with new Linux userspace API for controlling battery
thresholds, available since 4.17.
(/sys/class/power_supply/BAT0/charge_(start|stop)_threshold).
The new API is supported by TLP (you might need to set NATACPI_ENABLE=1
in /etc/tlp.conf).
tpacpi-bat works fine too.
Signed-off-by: Alexey Kharlamov <der@2-47.ru>
Signed-off-by: Evgeny Zinoviev <me@ch1p.com>
Change-Id: I2a90f9e9b32462b8a5e9bc8d3087ae0fea563ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/23178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: Ifda495420cfb121ad32920bb9f1cbdeef41f6d3a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31698
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The function (preprocessor macro) we need is defined
in <endian.h> not <swab.h>.
Change-Id: I3a86c7050bf853e3a56a15421132240e19f40912
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31704
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I91158452680586ac676ea11c8589062880a31f91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31692
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Various instances of google_chromeec_command() can return non-zero number
(both positive and negative) to indicate error -- fixing cbi_get_uint32()
and cbi_get_string() so they follow the same convention.
BUG=b:123676982
BRANCH=kukui
TEST=build with kukui/flapjack configurations
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I7f0a8a61d01d942cba57036a17dd527fdbbf940c
Reviewed-on: https://review.coreboot.org/c/31585
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch clarifies the definition of google_chromeec_command.
Currently absence of the definition isn't causing any problem because
wrapper APIs check 'ret != 0' or wrapper APIs check 'ret < 0' for an
interface which returns only negative error codes.
However, there is a chance that a new wrapper API will be addedl which
check 'ret < 0' to catch errors, assuming other interfaces behave the same.
Or existing wrapper APIs will be broken as soon as they're compiled for
another interface.
BUG=chromium:935038
TEST=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I2ce7109b5f2a1d5294f167719730bc1f039ba03f
Reviewed-on: https://review.coreboot.org/c/31613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This change fixes the power status events for AC and battery
events from the EC. The register that was being used is not
returning the expected information.
BUG=b:125472740
TEST=enable ACPI debug in the kernel and verify that AC and
battery insert/remove are detected properly.
Change-Id: I15f71fcf0ca6aa9438e951865787c9fc273792d8
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
On my Thinkpad T420 the default 3000ms SeaBIOS timeout is too short,
it takes nearly 5000ms for my keyboard to become ready.
Timing out before it's ready leads to pretty bad behavior: I cannot use
my keyboard at all to control SeaBIOS, nor the subsequent GRUB instance.
Linux is fine though, possibly because it does its own keyboard init.
Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com>
Change-Id: Id1681bf3921c8b5dc124d4c4e9072f146f84f3a2
Reviewed-on: https://review.coreboot.org/c/31279
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use AGPIO 10 as the EC sync interrupt for MKBP events for sensor data.
On this platform, interrupts are routed via the GPIO controller so need to be
registered using GpioInt instead of Interrupt.
BUG=b:123750725
BRANCH=grunt
TEST=MKBP events still received (with matching EC and kernel changes)
Change-Id: If499d24511bbaa7054207b7e0b98445723332c4f
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add an ACPI device that is compatible with the Intel Virtual
Button kernel driver for reporting tablet mode state and various
virtual button events that may come from the EC.
This driver is used in Windows and in the Linux kernel at
drivers/platform/x86/intel-vbtn.c
Because of a check in the kernel driver it expects the board to
define the SMBIOS enclosure type as convertible for the check at
driver load time for tablet/laptop and dock/undock to work.
The virtual tablet mode button will proxy the tablet mode state
sent from the Sensor Hub to a SW_TABLET_MODE event in the kernel.
The virtual power button is used during S0ix for the EC to wake
the system with an SCI. There are separate press and release
events which are sent for completeness, although the kernel driver
will ignore the release event.
BUG=b:73137291
TEST=Test that the power button can wake the system from S0ix.
Also verify that the device is reported as laptop mode at boot.
Change-Id: I0d5dc985a3cfb1d01ff164c4e67f17e6b1cdd619
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31208
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a separate ACPI device for the Wilco EC event interface so that the
OS drivers can bind to it separately. Since the event handling is all
done with ACPI and not mailbox calls this will be implemented as a
standard acpi_driver in the kernel.
BUG=b:119046283
TEST=veriy device exists in DSDT
Change-Id: I5259a926fb6d5faea835bcdefa12f0184c5adf4a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
1) In the EC _REG method set the flag indicating S0ix support in the OS.
2) Add a function that can be called by the LPI _DSM method to indicate
to the EC that the OS is entering or exiting S0ix.
BUG=b:73137291
Change-Id: Iddc33a08542a6657694c47a9fda1b02dd39d89f7
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31094
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modifiy Makefile so that we can get board ID in verstage.
BRANCH=none
BUG=b:117916698
TEST=manually
Change-Id: Idcdb6e07f565c937185cab811abac0ce47e5e3a7
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/31006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Send required EC command to enable ACPI S3 wake up from lid switch.
BUG=b:120748824
TEST=Put Sarien system into S3 and then wake up from lid switch
successful.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I13f3469847b0886147b8b624311a1ece796f847b
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
A programmable logic device used by Kontron as EC on their COM express
modules. The name `kempld` is taken from Linux kernel sources, as is the
I2C driver. The meaning of the acronym is unclear, probably: Kontron
Embedded Module PLD.
Change-Id: If9a0826c4a8f5c8cd573610c2d10561334258b36
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Commit 8cf8aa2 [ec/google/chromeec: Use common MEC interface]
changed the return mechanism for the checksum on reads/writes
for MEC devices, but incorrectly handled the passed-in csum
parameter by not dereferencing. This led to the returned csum
value always being zero, which causes all EC commands with non-
NULL data_in to fail with a checksum error.
Fix this by storing the returned checksum in a temp variable,
and only assigning to csum when the pointer isn't NULL;
Test: build/boot google/chell, verify EC hello command succeeds,
keyboard backlight turned on at boot.
Change-Id: I7122c3fdc5a19f87f12975ee448728cf29948436
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Re-write the UAO handling code as it had stopped working (#171)
(the flag was not getting read from the RTC properly in SMM)
Remove the SMM code as it's not needed (but EC flag won't be set
upon entering S3 now)
Set the EC flags on boot the same way other flags are set
Document bitwise operators for clarity
Propagate changes to other Thinkpads
(updated X201 to have 2 bits for the flag as it only had 1)
Per Nicola Corna's previous commits, 0x0d is set for "AC only"
"AC only" does exhibit different behaviour - the USB port is
turned on a few seconds after entering S3, rather than < 1 sec,
regardless of AC status
Tested on X220
Change-Id: If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Send the EC command required to turn the camera power on
and verify that it shows up on the USB bus.
Change-Id: I9e9ba712a11cef85cde91ac21a4b6b5090ef58dc
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/29987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There is a dependency issue with the EC DPTF code accessing
methods that are external, but once the mainboard includes the
relevant code they become internal and the current version of
IASL used by jenkins will fail to compile it.
Until the new IASL is deployed everywhere wrap the EC DPTF code
and expect that the mainboard will explicitly enable it.
Change-Id: I612ad8f86d424060ca0303d267d7c2915c760173
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add the support needed for DPTF. This includes the methods to
write trip point values, read temperatures, and handle events.
This was tested on a sarien board by inspecting AML debug output
with the kernel while monitoring temperatures and trip points in
sysfs and controlling temperatures with a fan to ensure that when
a trip point is crossed an SCI is generated and the event is
handled properly.
Change-Id: I8d8570d176c0896fa709a6c782b319f58d3c1e52
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/29761
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Disable debug output from read/write methods by default
- Use argument to _REG to disable SCI when EC is unregistered
- Change read/write macros to sync level 2 so they can be called
when a mutex is already held
- Define some missing events
Change-Id: Ic65ebbb6a6151444c47b4aeff7429e186856c49a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/29760
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Extended events will be handled by the OS kernel driver, but that
driver needs a method exposed by ACPI to read the event data from
the EC and into a buffer.
Tested by generating a hotkey event and reading the buffer from
the Linux kernel driver with acpi_evaluate_object().
Change-Id: Ic8510e38d777a5dd31a5237867313efefeb2b48e
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/29674
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add EC command to enable WiFi radio and send that command at
startup. Tested to ensure WiFi is functional on a sarien board.
Change-Id: Iac46895c7118567e1eb55ea33051a1662103b563
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/29673
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the COM1 ACPI device based on the existing Kconfig option
CONFIG_DRIVERS_UART_8250IO instead of expecting the mainboard to
also define another value for ACPI.
Change-Id: I69361cc2c245cfcad3e4f57567bf56d5a26f0b06
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/29672
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use acpigen_write_processor_cnot to implement notifications to the CPU.
Automatically generate \PPKG in SSDT.
Change-Id: Iecc54e94484f5f11e0ba8ef6d1d844276e484b4d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/29886
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
OEM name can be stored in CBI. This change can support for fetching
the OEM name from CBI.
BUG=b:118798180
TEST=Verified to get data from CBI
Change-Id: I4938c4d60fcad9e1f43ef69cc4441d1653de7e24
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/29497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
In order to support Multi-DPTF profile, Device DPTF Profile Number is
introduced into EC_ACPI_MEM_DEVICE_ORIENTATION ACPI Space at offset
0x09. This bit field stays along with Tablet Mode Device flag.
BUG=b:118149364
BRANCH=None
TEST=Ensured that the expected DPTF table are loaded in different
modes(base attached/detached and clamshell/360-flipped) on Soraka and
Nautilus.
Change-Id: Ie14916ac16c50cbe0990021e2eb03d5121cd0e07
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/29248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES
since it aligns with the use-case.
BUG=b:118149364
BRANCH=None
TEST=Ensured that the expected DPTF table are loaded in different
modes (base attached/detached and clamshell/360-flipped) on Soraka and
Nautilus.
Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/29261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
EC_SYNC_IRQ from EC to host is level-triggered in practice and
configuring it as edge-triggered on the host results in host missing
events if there are multiple events queued on the EC side. This is
because Linux kernel driver reads one event per irq and the EC does
not de-assert the interrupt line until all events are drained
out. This results in event queue being filled up completely on the EC
and the host failing to see any of those events.
This change configures EC_SYNC_IRQ as level triggered to allow the
host to read events from the the EC as long as the line is asserted.
BUG=b:118949877
Change-Id: Id3fcfa0445f83865d57975a7bbc179dca047ba4c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
|
|
If remaining charge is more than x% of the full capacity, the
remaining charge is raised to the full capacity before it's
reported to the rest of the system.
Some batteries don't update full capacity timely or don't update it
at all. On such systems, compensation is required to guarantee
the remaining charge will be equal to the full capacity eventually.
On some systems, Rohm charger generates audio noise when the battery
is fully charged and AC is plugged. A workaround is to do charge-
discharge cycles between 93 and 100%. On such systems, compensation
was also applied to mask this cycle from users.
This used to be done in ACPI, thus, all software components except EC
was able to see the compensated charge. This patch is part of the
effort of moving the logic to EC. With this and the EC changes, EC
can see what the rest of the system sees, thus, can control LEDs
synchronously (to the display percentage).
Another rationale of this move is EC can perform more granular and
precise compensation than ACPI since it has more knowledge about the
battery and the charger.
CQ-DEPEND=CL:1312204
BUG=b:109954565,b:80270446,chromium:899120
BRANCH=none
TEST=Verify charge LED changes to white (full) on Sona synchronously
to the display percentage.
TEST=Verify charge LED changes to blinking white (low) on Sona
within 30 seconds synchronously to the display percentage.
Change-Id: I0b51911b90dc2e7fcf5c730c54d9fda1fea76aa9
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/29441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add a way for the mainboard to provide a wake pin that the EC
will use to wake the system. This defines a _PRW object.
Change-Id: I94954104bbb8226683c37abc8c0465fe3c62a693
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29408
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The speakers start up muted, and the EC must be told by the BIOS
to unmute it. This helps prevent popping noises on boot/resume.
Change-Id: I693f1d01e46e19362ef8fd0d5b3f4930967b5a12
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29203
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI devices for the basic SuperIO functionality provided by the EC
for PS/2 keyboard, PS/2 mouse (trackpad emulation), and legacy UART.
The specific defines to enable these devices should be declared by the
mainboard before including this ASL, the same as the Chrome EC behavior.
Change-Id: I910940ebf26b8758ab12d695e1eba9c668c640c6
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add methods to handle ACPI EC events at runtime. Currently only
some common events are handled like lid switch and battery info,
and the event status is printed for debug on other events.
Change-Id: Ic0bd070940c8a2dfa6a251f3464301418bdb69c1
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the expected objects (_BST, _BIF, _BIX) for reading battery
information and status from the embedded controller, and the
expected objects for reporting AC power status.
The battery was tested by booting with a battery attached and checking
that it is present in /sys/class/power_supply/BAT0 and that the values
are consistent and within expected ranges.
The AC device was tested by checking the AC status in sysfs when AC
is inserted or removed while the system is running.
Change-Id: Ie996891c383c9e990736690aef9795512ad6d35a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the base ACPI support for the Wilco embedded controller, using
ASL 2.0 syntax throughout.
This includes the EC device and its resources, as well as the layout
for the EC RAM and the functions needed to read and write to the EC RAM.
The EC RAM address space is typically read/write, and so the ACPI EC
device expects that a defined Field can be read and/or written. With
this EC the read and write address spaces are different. For example,
a read from address zero will return data that is unrelated to what a
write to address zero expects.
This makes using a typical OperationRegion to describe the EC RAM
address space somewhat impracticle, since field definitions would
overlap. Instead, methods are provided for reading and writing to an
EC RAM offset, and the EC RAM layout is defined as a Package that
describes offset+mask for read or write fields within the EC RAM.
Change-Id: If8cfdf2633db1ccad4306fe877180ba197ee7414
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a function for use in bootblock stage that performs early init
of the EC, in particular setting it up for UART passthrough so a
legacy serial port can be used by the host.
This needs to be called by the mainboard that intends to use it
in bootblock in order for the UART to be available in later stages.
Some of the PNP style programming may look odd, but it is following
the EC specification which is not entirely standard. This code has
been tested on a board with this EC and it is functional.
Change-Id: I9d6935a9fdf0d7290a94bf2ee565ef2a7c00ecc7
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29121
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Send a command to the EC on the way into S3 suspend state telling
it to save the PS/2 data, and on resume send it a command for
restoring the PS/2 data that was previously saved.
Change-Id: Ic4b5d6d2656dbb1c476b9211b0d60c71b0cd7b32
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29120
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add EC handlers for specific SMM actions:
- on entry to sleep state tell the EC to save state and to prepare for
the host to enter sleep
- on ACPI enable/disable send command to the EC
- add a function to print SMI reasons when eSPI SMI is received
These need to be called by the mainboard handlers which will be done
when a board is added that uses this EC.
Change-Id: Ibabdc1462e0a8df405f9520244b83684e2ccf2f5
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29119
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC expects to receive updates about the BIOS boot progress. This is
used for the EC logging to track system boot completeness. If the EC is
not informed about BIOS progress it will turn the system off 30 seconds
after the boot starts.
Change-Id: I693c3930117db2b69a119aee0380d6f303c4881c
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29118
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a chip_operations structure for Wilco EC and hook it into the device
tree so it can be initialized at boot.
Reserve the device resources specified in Kconfig, which will also
create the device IO windows if they have not been created in bootblock.
If the IO windows already exist (becauase they were specified in the
mainboard devicetree.cb) then this will find the existing entry instead.
During device init stage prepare the keyboard for use, which is required
for it to be functional in firmware and OS with this EC. Also send a
command to the EC telling it to pass the power button through to the
host for processing.
Change-Id: I0adb01cf394f939f4a28aeb47fe4d0bcda5957d9
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add EC mailbox commands that are related to the power and state of the
system. These commands include:
- read the power status registers from the EC
- read & clear the power status registers
- helper function to read the current lid state
- tell the EC why the host is about to power off
- tell the EC that the host is about to enter a sleep state
Change-Id: Iaa7051b4006e3c1687933e0384d962516220621f
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add basic supported mailbox commands for this embedded contrlller,
and define some command functions to retrieve and print information
about the EC.
Change-Id: Ibcef7d58e1852fdb2e52b97acd4b51a26dd8cd77
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29115
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add helper functions that make it more convenient to send and receive
the most common types of commands to the Wilco embedded controller.
Change-Id: I9cee1a3b2f9d507f6ecdfae9f4a34ba59056cb91
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29114
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Google "Wilco" Embedded Controller is a new embedded controller that
will be used in some future devices. The mailbox interface is simliar
to the existing Chromium EC protocol version 3, but not close enough
that it was convenient to re-use the full Chrome EC driver.
This commit adds the basic mailbox interface for ramstage which will be
used by future commits to send varous mailbox commands during the boot
process. The IO base addresses for the mailbox interface are defined in
Kconfig so they can be changed by the mainboard if needed.
Change-Id: I8520dadfa982c9d14357cf2aa644e255cef425c2
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Switch to using the common MEC interface instead of the
Chrome EC specific code.
Tested on a Chell chromebook that has a MEC based Chrome EC
to ensure that the EC interface is still functional.
Change-Id: Idf26e62c2843993c2df2ab8ef157b263a71a97c9
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to re-use the MEC interface code in the Chrome EC driver
move it to a common directory within the ec/google directory.
The Chrome EC driver itself is changed to use this interface in the
next commit, and future commits will introduce a new EC that also
uses this interface.
Change-Id: I13516b5e4c4c49f53bb998366284a26703142e2a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds ec_boardid.c to smm stage, which is required to allow
mainboards to query the ec to get board version in this
stage.
BUG=b:112366846,b:112112483,b:112111610
Change-Id: Iccbba96ebb94a12745a62cbfe3496f9e6f921e3d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/28982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Enrico Granata <egranata@chromium.org>
|
|
There doesn't seem to be a reason why we would want to protect certain
chromeec functions with __SMM__ guard. So, this change gets rid of
it. If the functions remain unused, then they would be removed during
linking.
Change-Id: I8196406074b01fe8ea15173c55d45bb86384be1b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29006
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Enrico Granata <egranata@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28934
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards are adding a second pin used for synchronization between
the EC and AP. This is a direct connection between the EC and the SOC
that is intended to provide a lower latency interrupt signal for
sensors on the EC.
Currently the runtime EC interrupts assert an SCI before eventually
resulting in a Notify() on the MKBP device that the sensor driver users.
These extra layers add processing time and require additional EC
communication to determine the event source.
This interface was tested on a reworked Nocturne board with modified
EC and a modified kernel driver to ensure that the interrupt asserts
as expected and can be used by the kernel driver.
Change-Id: I49a11363ce82882e572bcb8923fd114ab6593fea
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/28758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The helper function to get the board version from EC returns 0 on
failure. But 0 is also a valid board version. Update the helper function
to return -1 on failure and update the use-cases.
BUG=b:114001972,b:114677884,b:114677887
Change-Id: I93e8dbce2ff26e76504b132055985f53cbf07d31
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/28576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Jett Rink <jettrink@google.com>
|
|
Make sure S0Ix is supported before trying to set up the EC's
lazy wake mask.
Change-Id: I78896ffe6312409c9f241b3b3224169c188bb265
Signed-off-by: Paul Moy <pmoy@chromium.org>
Reviewed-on: https://review.coreboot.org/28610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The pmh7 has at least a 9bit address space.
The h8s allows to access the 9th address space by using io port
0x15ed as second address register.
The pmh7 is connected via SPI to the h8s. The h8s is acting as
proxy to access the address space.
Change-Id: I0d7ce00950862adf928a88d70afbc33df8b87d9a
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/28196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Evgeny Zinoviev <me@ch1p.com>
|
|
Add CMOS option that allows to use both integrated and discrete GPU.
Tested on ThinkPad W530.
Change-Id: I8842fef0fa1235eb91abf6b7e655ed4d8598adc7
Signed-off-by: Evgeny Zinoviev <me@ch1p.com>
Reviewed-on: https://review.coreboot.org/28393
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some operating systems won't find the keyboard if it is under
the SIO node.
BRANCH=none
BUG=none
TEST=Boot Windows, observe that keyboard is working
Original-Signed-off-by: Stefan Reinauer <reinauer@google.com>
Original-Change-Id: I76b1ca9bf9243ffa861bed9c356a45377e7f43ef
Original-Reviewed-on: https://chromium-review.googlesource.com/895364
Change-Id: If99e15bef2173c44cecaa8fdeaa69381bd0e499a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/28386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Some ACPI interfaces introduced by Chrome or coreboot do not
need drivers outside ChromeOS, for example Chrome EC or
coreboot table; or will be probed by direct ACPI calls (instead
of trying to find drivers by device IDs).
These interfaces should be set to hidden so non-ChromeOS systems,
for example Windows, won't have problem finding driver.
Interfaces changed:
- coreboot (BOOT0000), only used by Chrome OS / Linux kernel.
- Chrome OS EC
- Chrome OS EC PD
- Chrome OS TBMC
- Chrome OS RAMoops
BUG=b:72200466
BRANCH=eve
TEST=Boot into non-ChromeOS systems (for example Windows)
and checked ACPI devices on UI.
Change-Id: I9786cf9ee07b2c3f11509850604f2bfb3f3e710a
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/1078211
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Tested-by: Hung-Te Lin <hungte@chromium.org>
Trybot-Ready: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/28333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Windows certification tests will fail if the PS2 devices are using Plug
and Play ID (PNP0303). For all Chromebooks we should use GOOG000A.
BRANCH=eve
BUG=b:110066056
TEST=AltOS certification test verify.
Change-Id: I479471fdb3102e3b492612a4e6ad07612273083a
Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/1098874
Reviewed-by: Matt Delco <delco@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Trybot-Ready: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/28334
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On some detachables, the mere presence of attached base is not enough to
determine whether the device is in tablet mode or not, so we introducing
a new "switch" in EC, separate from "Tablet Mode" switch, to signal
whether the base is attached or not.
We also want the driver to be separate from cros_ec_keyb, so we create
a new ACPI device, C(hrome)B(ase)A(ttached)S(witch), with HID GOOG000B,
and guard it with EC_ENABLE_CBAS_DEVICE.
Change-Id: Id73a12f04a1a48f7fbd9365c2a501afadf3878fa
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-on: https://review.coreboot.org/28260
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the code simpler and improve readability.
Change-Id: Ifa9308c32e4646c122254931b55fb83541a10a3c
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/28195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Fix the following FWTS error:
FAILED [MEDIUM] AMLAsmASL_MSG_RETURN_TYPES: Test 1, Assembler warning in line
3038
Line | AML source
--------------------------------------------------------------------------------
03035| Return (One)
03036| }
03037|
03038| Method (_Q09, 0, NotSerialized) // _Qxx: EC Query
| ^
| Warning 3115: Not all control paths return a value (_Q09)
03039| {
03040| If (Acquire (PATM, 0x03E8))
03041| {
================================================================================
ADVICE: (for Warning #3115, ASL_MSG_RETURN_TYPES): Some of the execution paths
do not return a value. All control paths that return must return a value
otherwise unexpected behaviour may occur. This error occurs because a branch on
an conditional op-code returns a value and another does not, which is
inconsistent behaviour.
_Q09 is a reserved method and can't return a value. Change the logic
so that no return is used and avoid this test error.
BUG=b:112476331
TEST=Run FWTS.
Change-Id: Ibbda1649ec2eb9cdf9966d4ec92bfd203bb78d07
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
There's two instances od _UID 1 for PNP0C02. This change moves the
more system-specific instance of the two to a higher number. I
believe these are the 4 I'm seeing.
soc/intel/skylake/acpi/systemagent.asl
Device (PDRC)
Name (_HID, EISAID ("PNP0C02"))
Name (_UID, 1)
soc/intel/skylake/acpi/lpc.asl
Device (LDRC)
Name (_HID, EISAID ("PNP0C02"))
Name (_UID, 2)
ec/google/chromeec/acpi/superio.asl
Device (ECMM) {
Name (_HID, EISAID ("PNP0C02"))
Name (_UID, 1)
ec/google/chromeec/acpi/superio.asl
Device (ECUI) {
Name (_HID, EISAID ("PNP0C02"))
Name (_UID, 3)
Change-Id: I2b0f1064726a1fa3940ccfb2a4627c79a26684e4
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/27604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ia05c9c5233319fe74d81c1f1db6ca3c2d875f9e7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The DRAM part number can be stored in the CBI data. Therefore, add
support for fetching the DRAM part number from CBI.
BUG=b:112203105
TEST=Fetched data from CBI on phaser during testing.
Change-Id: Ia721c01aab5848ff36e11792adf9c494aa25c01d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Store the power on defaults in the _REG method after the ERAM region
is ready for use. It might not be ready when accessed from _INI.
Tested on Lenovo T430.
Change-Id: I70f22f8ac61dd850180fa159313bb0f8e4ab31d9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/27710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Additional diagnostic information about the EC and the most recent
reasons why it has reset the AP are read out and logged via printk.
This may aid in debugging spurious hangs and/or resets on the AP by
providing traceability to the EC when it triggered the reset. Merely
knowing that the EC was also recently reset may provide valuable
intelligence. See also https://crrev.com/c/1139028.
Change-Id: Ie6abe645d5acefb570b9f6a3c4a4b60d5bcd63cd
Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org>
Reviewed-on: https://review.coreboot.org/27621
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update ec_commands.h to be a verbatim copy of upstream, except retain
the complete copyright notice found in coreboot's copy. Upstream refers
to a file not present in coreboot.
Change-Id: Ic3daa09ffd83c089b6874e0ea9aab8aa60016775
Signed-off-by: Jonathan Brandmeyer <jbrandmeyer@chromium.org>
Reviewed-on: https://review.coreboot.org/27620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Since ops was passed as override in the pnp_dev_info struct, the generic
pnp_ops that was passed to pnp_enable_devices was never used.
Change-Id: Ic35a232a9867936d3d84aa275ae50e3e3dd9bf97
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27396
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since ops was passed as override in the pnp_dev_info struct, the generic
pnp_ops that was passed to pnp_enable_devices was never used.
Change-Id: I59eb60efeefcdbe8b2dc08e17453cf95bdfd39b1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27395
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since ops was passed as override in the pnp_dev_info struct, the generic
pnp_ops that was passed to pnp_enable_devices was never used.
Change-Id: I10e2c6da0043eb291a8c6266b251054dbe599653
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27393
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since ops was passed as override in the pnp_dev_info struct, the generic
pnp_ops that was passed to pnp_enable_devices was never used.
Change-Id: Id09c6cffb9a0cbbd9189c18801121449c9504422
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27394
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement ACPI S3 resume control to restore the state before entering
sleep.
* Store the requested state wake state for bluetooth and WWAN.
* Add new methods to init the state and apply the requested state on wake.
* Call the new method on all devices.
Change-Id: I13c08b8c6b1bf0f3deb25a464b26880d8469c005
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add ACPI methods GUWB and SUWB for thinkpad_acpi.
Required for power control of the UWB module.
Change-Id: I8f9a56e45c0d765b0e06b8d3600bd3575dd09491
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add methods MLCG and MLCS for thinkpad_acpi kernel module.
Required for backlight or thinklight control from userspace.
Change-Id: Ia65e770e772936c9c32be33c30839a2dee2a107c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Implement GWAN and SWAN for thinkpad_acpi kernel module.
Both methods allow power control of the WWAN module.
Change-Id: I5550c78e0d36884eca7a8d8ece19b64aaee44045
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I447aaa1850b7e8b514a8c4c04bf5b426d3d1cd0a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
* Add SSDT generator to add dynamic ACPI code.
* Implement GBDC and SBDC for thinkpad_acpi kernel module.
Required for BDC power control from userspace.
Tested on Lenovo T430:
The bluetooth module is detected and can be powercycled using network manager.
Change-Id: Ida825196650966194a883945896a038b0790fe45
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move the APCI HKEY device to a new file and include it.
The follow-up commits will extend it and this way it remains readable.
Change-Id: Ie59b59e5a4148807125c71a362161026f685a97e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Since none of the boards using chromeec select DRIVERS_PS2_KEYBOARD
now, there is no need to call pc_keyboard_init anymore. This change
gets rid of the call and adds an error message in case any mainboard
using chromeec tries to select this config.
BUG=b:110024487
Change-Id: Ia0b56abe0a5990e527277eaf3397e00dccda3e50
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
None of the mainboards using Chrome EC set SCI mask for power
button. Thus, the EC will never generate SCI for power button
events. This change removes the Notify call for power button as part
of clean up for getting rid of the power button device in coreboot.
BUG=b:110913245
Change-Id: I86c72fd82f1a0e6d5693ebbcd58e2aea808f8817
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For enable_resource & set_resource, use default DEVICE_NOOP so that they
are not reported as missing during enumeration.
BUG=None
BRANCH=None
TEST= Build & boot soraka.
Change-Id: I0fcfb8df39c6313c8a5bab5b780a8ffa7531d210
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/26869
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib47cc1ee617aae74a8cfbcb25c1d0c083196f417
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change adds smi_events to google_chromeec_event_info and allows
mainboards to set SMI mask if current boot type is not S3 wakeup.
Change-Id: I899a6af6e57d295b4eac2039c8245ebcc73a42bb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently the throttle event handler method THRT is defined as an extern,
then defined again in the platform with thermal event handling. In newer
versions of IASL, this generates an error, as the method is defined in
two places. Simply removing the extern causes the call to it to fail on
platforms where it isn't actually defined, so add a preprocessor define
where it's implemented, and only call the method on those platforms.
Change-Id: I6337c52edaf9350843848b31c5d87bbfca403930
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: If450a68e98261ffba4afadbce47c156c7e89e7e4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26460
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This maps a bit field to the EC (EC_ACPI_MEM_USB_PORT_POWER) that can be
used to control the power state of up to 8 individual USB ports. Some
Chromeboxes have their GPIO pins for controlling USB port power wired to
the EC, so they cannot be accessed directly by coreboot.
Change-Id: I6a362c2b868b296031a4170c15e7c0dedbb870b8
Signed-off-by: Emil Lundmark <lndmrk@chromium.org>
Reviewed-on: https://review.coreboot.org/26471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Avoids array overflow
Change-Id: Ia49a782ba6729c740e3b91c500120132983f6b3c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/25992
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use of device_t has been abandoned in ramstage.
Change-Id: I3db9487c46b29510e59ec5c019d022f5cbaff354
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The tablet event handler method TPET is defined as an extern, then
defined again in skylake, the only platform that supports it. In newer
versions of IASL, this generates an error, as the method is defined in
two places.
Remove the extern and the CondRefOf check. That's not needed if we
only set the EC_ENABLE_TABLET_EVENT define on platforms that have a
TPET handler.
Change-Id: I8bee069fc95637446593dfaaae1254e931421517
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/25983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Currently the thermal event handler method TEVT is defined as an extern,
then defined again in platforms with thermal event handling. In newer
versions of IASL, this generates an error, as the method is defined in
two places. Simply removing the extern causes the call to it to fail on
platforms where it isn't actually defined, so add a preprocessor define
where it's implemented, and only call the method on those platforms.
Change-Id: I64dcd2918d14f75ad3c356b321250bfa9d92c8a5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/25916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently, google_chromeec_pd_get_amode infinitely loops if a TCPC port
is connected to a device with alternate mode(s) and the call is made
for the mode with the index higher than 0 (e.g. Zinger).
Cros EC manages alternative modes entered in an array (amode[]). The
command is designed to accept a query for an particular index and a
particular SVID.
Zinger has a 'Google' mode. It's stored in amode[0]. When AP queries
first time for DisplayPort with index=0, EC says 'no' as expected.
AP sends the next query with index=1 but EC_CMD_PROTO_VERSION (0x00)
is sent instead because cmd_code is cleared by google_chromeec_command.
res.svid is supposed to be 0 when EC hits the last index + 1 but
res.svid is set to 2 by the EC_CMD_PROTO_VERSION handler because
EC_PROTO_VERSION is currently 2. So, the call succeeds and AP goes to
the next index and this repeats forever.
Any USB-C device with non-DisplayPort alternate mode can cause this
hang unless HDMI port is used.
This patch resets all the fields of chromeec_command in each iteration
in case google_chromeec_command changes them.
BUG=b:78630899
BRANCH=none
TEST=Verify Fizz boots without monitors on Zinger. Verify the svid
enumeration happens as expected.
Change-Id: I388ed4bdfac9176d8e690c429e99674ed267004f
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/25878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of writing out '__attribute__((weak))' use a shorter form.
Change-Id: If418a1d55052780077febd2d8f2089021f414b91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
google_chromeec_command() may only write the 1 or 2 bytes to
variable r (4 bytes). However, this api returns 4 bytes data.
To avaid returning the incorrect data, we need to initialize the
local variable.
BUG=b:76442548
BRANCH=none
TEST=write 2 bytes data into the flash, then, read by cbi_get_uint32
Change-Id: I3395c97ab6bfd7882d7728310de8a29041190e76
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/25460
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC needs to set the PPCM value depending on whether
Turbo is enabled or not, and the values differ between
Broadwell (0, 1) and Skylake (1, 2) platforms.
Change-Id: I662dce54415e685c054ffc00b6afde0f1f7765e2
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/25329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
