summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2018-08-28google/grunt: Reset BayHub EMMC freq to SD base CLK 50MHzKevin Chiu
Bayhub eMMC controller default runs SD base 50MHz at the first power on. After boot into OS, mmc kernel driver will config controller to HS200/208MHz and send MMC CMD21 (tuning block). But Bayhub PCR register 0x3E4[22] (eMMC MODE select) is not clear after system warm reset. So eMMC will still run 208Mhz but there is no block tuning cmd in depthcharge. It will cause two Sandisk eMMC (SDINBDA4-64G-V/SDINBDA4-32G-V) to fail to load kernel and trap in 0x5B error (No bootable kernel found on disk). BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: Ic080682e67323577c7f0ba4ed08f8adafca620cc Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/28353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-28src/drivers/pc80/pc: Remove unneeded includeElyes HAOUAS
Change-Id: Ic238181d5c26ab8cf549137824a7c5e6c6d80ab1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-27drivers/intel/wifi: Make WIFI_SAR_CBFS user visibleFurquan Shaikh
This change makes WIFI_SAR_CBFS user selectable option so that it can be enabled/disabled from menuconfig along with the SAR filepath. BUG=b:112425861 Change-Id: Idf6feaefe68e7ebf6786c2c36e92a054fba4483c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-25Revert "drivers/spi/spi_flash: don't allocate unbounded stack memory"Patrick Georgi
This reverts commit c5ee35ff861fe4447fd80119f645fba7bfd3a184. Reason for revert: breaks boards, uncertain if it _really_ works. Change-Id: I9ba2ba877b9a391306f89295c0c1d0e2d011c5ea Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28338 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jean Lucas <jean@4ray.co> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23drivers/spi/spi_flash: don't allocate unbounded stack memoryPatrick Georgi
This open-codes flash_cmd, but until the API is fixed for real, it uses xfer's existing scatter-gather ability to write command and data in one go. BUG=chromium:446201 TEST=emerge-coral coreboot succeeds Change-Id: Ic81b7c9f7e0f2647e59b81d61abd68d36051e578 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-22drivers/elog/elog.c: Create extended eventRichard Spiegel
For debug reasons, sometimes you not only want to log an event, but also some extra information that would help debugging. Create an extended event reporting event type with a dword complement, and define extended events for failing to enter S3 due to pending wake event (one for pm1 and one for gpe0). BUG=b:111100312 TEST=Add a fake pending wake event, build and boot grunt, see the event in eventlog.txt. Change-Id: I3e8df0953db09197d6d8145b0fc1e583379deaa5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-21security/tpm: Fix TPM 1.2 state machine issuesPhilipp Deppenwiese
* Fix ACPI resume path compilation for TPM ramstage driver * Move enabling of the TPM prior activation and remove reboot return status from TPM enable. More information can be found via the TCG specification v1.2 Tested=Elgon Change-Id: Ided110e0c1889b302e29acac6d8d2341f97eb10b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/28085 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20drivers/pc80/rtc: do not warn if CMOS options are unavailableStefan Tauner
Callers should have a default ready and get noticed by the return value of get_option(). No need to scare log readers at this location. Change-Id: Ied373d8a02afdc8d1017c9f41d9004e3797dfbb3 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28215 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20src/drivers/usb/Kconfig: increase warning signs for BBB ownersStefan Tauner
The help text is already very clear but some users (first and foremost the author of this patch ;) are still selecting USBDEBUG_DONGLE_BEAGLEBONE when using a BeagleBone Black and waste hours on analyzing the debug output of EHCI debug driver. Change-Id: Ibf002db7d81ed44878f3ce0324170e4b99e780a5 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-14src: Remove duplicated 'include <device/device.h>'Elyes HAOUAS
Change-Id: Ia38c6f8d978065090564d449cae11d54ddb96421 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-14drivers/i2c/tpm/cr50.c: Check if TPM was readRichard Spiegel
Under some conditions, cr50_i2c_read() can return without actually reading the TPM, which will leave access uninitialized. Set an initial value for access, and if TPM fails to respond in time check if at least TPM was read. This way avoids printing an uninitialized value. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I5ec7a99396db32971dc8485b77158d735ab1d788 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-08-13driver/spi/stmicro: add 3.3V variant of N25Q032Stefan Tauner
Unfortunately stmicro.c does not distinguish the 1.8V version from the 3.3V versions (yet) although they have distinct RDIDs. I have at least ordered the ID macros accordingly and used a proper name in this patch. Change-Id: Id4fd8d46dcc9e51c1ae5504a32c2f8c5cfd863a1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-12drivers/intel/wifi: Get rid of unused wrdd.aslFurquan Shaikh
This change gets rid of unused wrdd.asl in intel wifi driver. This file became redundant when all boards moved to using SSDT for wifi device. Change-Id: I8b5b3816d77c90e75052c58a3120ab62185873a7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27963 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-12drivers/intel/wifi: Skip adding SSDT entry if device is disabledFurquan Shaikh
This change checks to ensure that device is enabled before adding entry into SSDT. BUG=b:112371978 Change-Id: Ibe4811bef8cf0978b7a82d66a32f96247b9c823d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-11drivers/pc80/tpm: add support for SLB9665 TPM2.0 moduleKamil Wcislo
SLB9665 are not initialized correctly. It looks like SLB9665 and SLB9660 return the same DEV ID. Initialize these devices according to TPM Kconfig selections. Tested on apu2 with following change: https://review.coreboot.org/#/c/coreboot/+/28000/ Change-Id: Ic20b9a65ef6a4ee392a9352f7c9bf01b2496f482 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/21983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-10drivers/i2c: Add i2c TPM support for different stagesPhilipp Deppenwiese
Change-Id: Ib0839933f8b59f0c87cdda4e5374828bd6f1099f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/23759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-08-10src/drivers: Fix typoElyes HAOUAS
Change-Id: I9144937b72a98517cbd41c093cff7bad543b4140 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27916 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09google/grunt: Override BayHub EMMC driving strengthKevin Chiu
Careena EVT SanDisk EMMC sku has high fail rate of 0x5B reboot failure. It'll need to increase 1.8V EMMC CLK/CMD, Data driving strength for this issue. CLK[6:4] CMD,DATA[3:1] original register value: 0x6B enhanced: 0x7F BUG=b:111964336 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I3db38ff12c566c258895c6643008a0472ca528bb Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27816 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09drivers/spi/spi_flash.c: Check input parameterRichard Spiegel
In procedure spi_flash_cmd_erase(), parameter "len" is not validated and could lead to the return of an invalid (non-initialized) value. Validate the parameter early on. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0b5129a15c9e0ea45f4dba4ab0729196cb64699b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09drivers/spi/winbond: Improve structure packingPatrick Rudolph
Use bitfields to pack the struct more tightly. Change-Id: If1e7a5a3a9504327f987403ec0a7b79b2383792a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27815 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04drvs/intel/gma/acpi: Add methods to use MBOX3Patrick Rudolph
* Add Mailbox 3 driver * Request brightness change through Mailbox 3 * Return Ones on error or if unsupported * Mark existing code as legacy (still required if no GMA driver is running) * Call legacy code if Mailbox 3 is unsupported, on error or if gma driver isn't running Tested on Lenovo T430: * Brightness control still works * Brightness is the same on S3 resume Change-Id: I51554c819148336b204d28972cbf775a10c3fb8a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03security/tpm: Improve TCPA log generationPhilipp Deppenwiese
* Make tcpa_log_init static and move init code into the tcpa_log_add_table_entry routine. * Add more checks for log initialization. * Fix minor issues Change-Id: I215d79eed7ad17c6ab87f0c4b14a282e519ef07d Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/27769 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30drivers/i2c/da7219: Allow disabling micbias-pulse featureDaniel Kurtz
These two da7219_aad properties are optional: - dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). [<2800>, <2900>] - dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) When the Mic Bias Higher Voltage feature is not required, firmware should just not provide the dlg,micbias-pulse-lvl and dlg,micbias-pulse-time properties. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:111700809 TEST=On grunt: No "Invalid micbias pulse level" in dmesg Change-Id: Ie99a8962e78c68b3f6927d0de34168f265d4efa9 Reviewed-on: https://review.coreboot.org/27613 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Akshu Agrawal <akshu.agrawal@amd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-28security/tpm: Add TCPA logging functionalityPhilipp Deppenwiese
* TCG spec only applies to BIOS or UEFI. * Therefore implement coreboot TCPA compliant log in CBMEM. * Write CBMEM log into the coreboot table for CBMEM tool access Change-Id: I0a52494f647d21e2587231af26ed13d62b3a72f5 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25drivers/tpm: Add TPM ramstage driver for devices without vboot.Philipp Deppenwiese
Logic: If vboot is not used and the tpm is not initialized in the romstage makes use of the ramstage driver to initialize the TPM globally without having setup calls in lower SoC level implementations. * Add TPM driver in ramstage chip init which calls the tpm_setup function. * Purge all occurrences of TPM init code and headers. * Only compile TIS drivers into ramstage except for vboot usage. * Remove Google Urara/Rotor TPM support because of missing i2c driver in ramstage. Change-Id: I7536c9734732aeaa85ccc7916c12eecb9ca26b2e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24905 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-19drivers/intel/gma: Default to LVDS for Internal on NEHALEMArthur Heymans
Devices using NORTHBRIDGE_INTEL_NEHALEM have an ironlake IGD which does not support eDP, therefore default to LVDS. Change-Id: I669c7793a6f78d72899df21b74b9314ef39a29af Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27512 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17security/vboot: Add interface for FSP 2.0 mrc cachingPhilipp Deppenwiese
* Move vboot/tpm specific implementation to vboot. * Only call functions if CONFIG_FSP2_0_USES_TPM_MRC_HASH is set. * Preparation for software hash function support, no logic changed. Change-Id: I41a458186c7981adaf3fea8974adec2ca8668f14 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24904 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-13intel/wifi: Add WGDS ACPI method for Geo Aware SARPratik Prajapati
To comply with all relevant bodies throughout the world, SAR settings take into account the lowest common denominator Tx power settings. This setup may lead to non-optimal performance when the user location is in a country that may allow higher power setting. The purpose of Wireless Geo Delta Settings (WGDS) is to provide offset settings for FCC, Europe, Japan and Rest of the world. These offsets would be added (by Intel wifi driver) to the base SAR Tx Power as defined in WRDS and EWRD BUG=b:65155728 BRANCH=none TEST=WGDS ACPI table gets created as expected. Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-09src/{device,drivers}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ic1c9b1edd8d3206a68854107ddcbc5c51cb487c3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-06google: Use proper ACPI ID for Semtech chips: STHGwendal Grignou
Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Delco <delco@google.com> Reviewed-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-03drivers/pc80/vga: Fix coding styleElyes HAOUAS
Change-Id: I0452407d1346ca8ead2638e2a31269931ea5d12e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-28drivers/intel/fsp2_0: Fix uncountable "information"Elyes HAOUAS
Change-Id: I91e13a786b12328f1d9200f76788faa19847bbe7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28vboot: Fix linking error with USE_OPTION_TABLE enabledPatrick Rudolph
Fix a linking problem with VBOOT and USE_OPTION_TABLE enabled. Make use of cbfs_locate_file_in_region() and always search the cmos_layout.bin in the 'COREBOOT' region. With this change applied there's no need to include the vboot_locator in SMM any more, we can't break NVRAM with different CMOS layouts, and we keep VBOOT and non VBOOT behaviour the same. Only include cmos_layout.bin and cmos.default in RO region. Add notes explaining the decisions. Tested on Intel Sandybridge, builds and boots with vboot enabled. Change-Id: I10ae94d7936581bbb5ea49384122062bd4934ea5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-27drivers/intel/fsp1_1: Fix vbt_len typeMatt DeVillier
Type of vbt_len should be size_t, change to fix compiler error Change-Id: I22798fa0edb98fcb9acc1b2dd52f34a61bc511e9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-25mb/google/kahlee/variants/grunt: Select low-power mode for BayHub720Simon Glass
Put the PCIe clock pins in power-saving mode for the BayHub eMMC bridge to save power. This requires use of an additional register (Misc control register 2) and another bit in the existing 'protect' register. The naming of bit 0 of that register is incorrect, based on the latest datasheet (14 June 2018) so fix that too. BUG=b:73726008 BRANCH=none TEST=boot without this patch: iotools mem_read32 0xfed80e00 0x0046ffff With this patch: $ iotools mem_read32 0xfed80e00 0x00463fff Also see that the PCIe clock stops when eMMC is idle and can be started by starting disk activity. Change-Id: I5ad1467b2e2e151215d2dfd2ce48cd4a451fe480 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/26515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-24drivers/i2c/alps: Get rid of i2c/alps driverFurquan Shaikh
i2c/alps driver implementation is an exact copy of the i2c/hid driver with only the addition of ALPS0001_HID. This can be supported by the i2c/hid driver using the hid field in devicetree which is what glkrvp mainboard does. So, this change removes the i2c/alps driver which is anyways unused. Change-Id: I60761c384f3d800532b2b346272da7be28b77acd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-24drivers/i2c/sx9310: Check for config not being NULL before using itFurquan Shaikh
This change fixes the issue reported by Coverity CID 1393576 to ensure that config is checked for NULL before it is actually used. Change-Id: I5f0cd2bf2437fc640f4cf8d8203a971daf1f8d17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22drivers/fsp1_1: fix VBT Loading by using GMA common functionMatt DeVillier
Commit 77034fa [intel/common: compress VBT] compressed vbt.bin in CBFS, but only changed the loader in soc/intel/common, forgetting the separate one used by FSP 1.1. As the soc/intel/common loader has now been rolled into the one in drivers/intel/gma, replace the VBT loader used by FSP 1.1 with the GMA one. Also, remove 2 now-unused header files. Test: build/boot google/chell, observe display initialized prior to OS load, no FSP warning in cbmem console due to invalid VBT signature. Change-Id: Iba882ee4d9e83dcd88bdf7dd2f5591f66005a3fe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22drivers/i2c: Add a driver for Semtech SX9310Enrico Granata
This adds a new driver for the SX9310 proximity detector device. The purpose of this is to enable the device's calibration information to be stored in firmware, and then transferred over to the kernel via ACPI. This device has more than 10 individual configuration parameters, so they would not fit in the generic driver's properties table. Change-Id: Id8c434eec9fe2da731e142442503a12e88db2236 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27173 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21drivers/ati/ragexl: Remove dead codeArthur Heymans
Is unused in the tree. Change-Id: I8a5308b6c7773d791d47832e620558394f1d727e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22132 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-16drivers/spi: Add Winbond W25Q80Kyösti Mälkki
This is a small 8 megabit (1 MiB) part. Change-Id: I9890457d0d14beb17d0a428c2701e620ae8c2512 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-14driver/spi/macronix.c: Add MX25L8005Arthur Heymans
Change-Id: I595198d66193c63f6c80c39371fbec10065d2165 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Use of device_t is deprecatedElyes HAOUAS
Change-Id: I9cebfc5c77187bd81094031c43ff6df094908417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14AGESA binaryPI: Drop tests for LATE_CBMEM_INITKyösti Mälkki
Change-Id: I4571e8b560559b3d7afe429eca8caa1512e244a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-12drivers/intel/gma: Unify VBT related Kconfig namesNico Huber
Shuffle words and drop the _DATA_FILE suffix. Change-Id: I0b0d50ea729e5580c0bc7b43f250ff387ce59cfc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-12drivers/i2c/generic: Ensure config is not NULL before accessing itFurquan Shaikh
This change checks to ensure that config is not NULL before it is accessed for the first time. Reported by: Coverity CID #1393312 Change-Id: Ic248c79783da9c2bfdf3b7f737e5963feff7558c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-11{src,util}: Use NULL instead of 0 for pointerElyes HAOUAS
Change-Id: I75fa4577055f25dde0a8b1044c005bba72cabd92 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11drivers/spi: Remove Kconfig prompt from SPI_FLASH_SMMNico Huber
Why would that be a user visible option? Drop the prompt and the `default n` and select it automatically when needed. I hope I caught all its users. TEST=Confirmed that systems with ELOG_GSMI or DEBUG_SMI compile and link. Change-Id: I44aeec530cc333f4ed4c8cfe67c7b5c9d8fb0049 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-11drivers/spi: Treat all stages commonly when adding driversNico Huber
Clean it up and add all flash chip drivers to postcar stage thereby. There seem to be SPI controllers that don't need the individual flash chip drivers. For those postcar support was added in b6b1b23 (console/flashconsole: Enable support for postcar). However for SPI controllers that need the individual drivers (i.e. those with CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y), linking of the postcar stage was broken. For all other stages, the set of compilation units stays the same. Change-Id: Ib8bdb824bfcf2d31ac696e39f797c4355b765756 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26871 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11drivers/spi: Remove DEBUG_SMI guardNico Huber
Let the linker take care of it. Change-Id: I67d2636ceb042f833c1b44888b98135d728940e0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-08arch/x86: Drop leftover ROMCC console supportKyösti Mälkki
Change-Id: I3e52569a34e1f7bfea8be9da91348c364ab705e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-08libgfxinit: Enable G45 support (for GM45/X4X)Nico Huber
Change-Id: Ia637d32ffaa5d280320955d34141eddc8b7df981 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22222 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-06src/driver/i2c/{generic,hid,tpm,max}: Update device name based on devicetree.cbNaresh G Solanki
Name i2c device structure based on that in devicetree.cb Now log looks like: I2C: 01:0a (WCOM Touchscreen) I2C: 03:13 (Realtek RT5663) I2C: 03:39 (SSM4567 Right Speaker Amp) I2C: 03:3a (SSM4567 Left Speaker Amp) BUG=None BRANCH=None TEST=Build & boot Soraka Change-Id: I5dbb66ab705cd8601b8b1dc94bc6ee9f181b7be2 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/26830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-04src/drivers: Get rid of whitespace before tabElyes HAOUAS
Change-Id: Ia9ca055679c0332613afb2bb2ed86df165de3baf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04src: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ib2bb6cc80ac2bdc389c60c7ffac4bba937f0fca8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04drivers/generic/ioapic/ioapic.c: Remove unneeded includeElyes HAOUAS
Change-Id: I670702f092e49bac8d7733d6fa77861e28e09093 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-01drivers/intel/wifi: Add PCI ID for Intel TP2 Wi-FiFurquan Shaikh
This change adds PCI ID for Intel TP2 Wi-Fi and adds that to pci_device_ids in Intel wifi driver. Change-Id: I51abf615fca6001d564e7cd672cc16f3a0fb8dd6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-31i210: Add additional PCI-ID to the i210 driverWerner Zeh
When the i210 MACPHY is operated in the SERDES Backplane mode (which depends on the programmed firmware image), its PCI-ID will be 0x1537. This does however not change the programming interface for the MAC address. Therefore add this new PCI-ID to the driver so that the MAC address can be programmed in this operation mode as well. Change-Id: I608535202c49e40690381c2b2ab26322d62cfb37 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/26683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-31{cpu,drivers,nb,soc}/intel: Use CACHE_ROM_BASE where appropriateNico Huber
Change-Id: Ibc2392cd2a00fde3e15dda4d44c8b6874d7ac8a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-31cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDENico Huber
As far as I can see this Kconfig option was used wrong ever since it was added. According to the commit message of 107f72e (Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRR), it was only necessary to prevent overlapping with CAR. Let's handle the potential overlap in C macros instead and get rid of that option. Currently, it was only used by most FSP1.0 boards, and only because the `fsp1_0/Kconfig` set it to CBFS_SIZE (WTF?). Change-Id: I4d0096f14a9d343c2e646e48175fe2127198a822 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-28drivers/i2c/max98373: update DT property namesSathyanarayana Nujella
Upstream Kernel side codec driver expect DT properties to have 'maxim' prefix. Update accordingly while filling SSDT entries. BUG=b:79362472 TEST=dump DT properties in kerenl side and cross checked TEST=Audio playback works with this change Change-Id: Iaa4b14492dbb5a0087242f1485493f3192336f60 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-25elog: Only log POST code from previous boot on non-S3 resumeDaniel Kurtz
It doesn't make sense to log post codes from a previous (failed) boot if we are resuming from S3, since the previous boot has to have been successful in order to enter S3 in the first place. While we are at it, use a helper function to combine conditionals and improve readability. BUG=none TEST=boot, suspend & resume grunt Change-Id: I4f3bb8526a0c8c0ea1efd924628b33c147543b88 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26528 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25elog: Only print TYPE_BOOT on S3-resume if CONFIG_ELOG_BOOT_COUNTDaniel Kurtz
Previously, we were unconditionally adding a TYPE_BOOT message to the ELOG on every boot (even S3 resume) if CONFIG_ELOG_BOOT_COUNT was disabled. Now that boot_count_read() returns 0 for the !CONFIG_ELOG_BOOT_COUNT case, the code becomes a bit simpler. BUG=b:79865267 TEST=firmware_EventLog Change-Id: I803fa4c3e03b6cc94751cf0ce34b78021ae2124e Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26527 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25drivers/intel/fsp2_0: Make use of xmalloc for FSP-S UPDSubrata Banik
Don't allocate FSP-S UPD over stack. This patch reduces stack usage for Cannonlake platform. TEST=On CNL platform stack usage reduces from ~3.6KiB to ~1KiB. Change-Id: I07ef0db6720d7e6865ac1641ce2661009332907c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26501 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22src: Remove non-ascii charactersMartin Roth
Change-Id: Iedb78e24a286a51830c85724af0179995ed553be Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-18drivers/usb/acpi: Add a driver for generating USB ACPIDuncan Laurie
Add a support for generating USB port descriptors for ACPI based on their definition by the board in devicetree.cb. This will generate a _UPC and _PLD for each port, using a generic _PLD by default. The _PLD can also be customized for more accurate descriptions if necessary. This sample devictree.cb shows a USB 2.0 type-A port behind a root hub connected to an xHCI controller: device pci 14.0 on chip drivers/usb/acpi register "desc" = ""Root Hub"" register "type" = "UPC_TYPE_HUB" device usb 0.0 on chip drivers/usb/acpi register "desc" = ""USB 2.0 Type-A"" register "type" = "UPC_TYPE_A" device usb 2.0 on end end end end end It will generate the following ACPI code in the SSDT: Scope (\_SB.PCI0.XHCI.RHUB.HS01) { Name (_DDN, "USB 2.0 Type-A") Name (_UPC, Package (0x04) { 0xFF, 0x00, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x1, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "RECTANGLE", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) } Change-Id: I7024390e407fda4b195211bd4755bb5ca53b2b37 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26173 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-15ACPI: Set the correct number of arguments in ACPI methodsMartin Roth
These methods had unused arguments and could be corrected by setting the correct number in the method initializer. Change-Id: I86606cfa1c391e2221cee31994e83667fa9ead61 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-15drivers/net: Check "ethernet_mac" when the device index is 1David Wu
It is a special case for the Fizz firmware branch, when the device index is 1, it will check "ethernet_mac" first and then "ethernet_mac0". For single NIC: config.device_index = "1", maps to "ethernet_mac" For multiple NICs: config.device_index = "1", maps to "ethernet_mac0" BUG=b:77836343 BRANCH=Fizz TEST=Add device index in device tree && Program the mac address to VPD in shell vpd -s ethernet_mac=<mac address> or vpd -s ethernet-mac[0-9]=<mac address> && reboot the system. Ensure the MAC address was fetched correctly by ifconfig command. Change-Id: I67fd2e999c8f9d8782f294fcafa84b8da970a3a6 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/26051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-13drivers/pc80/tpm: get ioport from pnp recordsKevin Cody-Little
Had 0x2e hardcoded, which is often the SuperIO chip. Instead, pull the port from the PNP tree generated from devicetree.cb, where either 0x4e or 0x2e will be specified. Change-Id: I4a92693f8acd3a1618cefcdf6b25eb22a727e20f Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com> Reviewed-on: https://review.coreboot.org/26203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-11drivers/intel/gma: honor vbt_size parameter to locate_vbt()Aaron Durbin
In 4a3956d7 (drivers/intel/gma, soc/intel/common: improve cooperation) the vbt_size parameter was not honored leading to the use of unitialized variables from the caller. Instead, keep track of if the vbt is already loaded by using the size returned from the load. If it's non-zero the vbt has been loaded. BUG=b:79562868 Change-Id: Ia1c47f0d982fae74e0223922f83943c68a846aa9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/26236 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09drivers/intel/gma, soc/intel/common: improve cooperationPatrick Georgi
Instead of both featuring their own VBT loaders, use a single one. It's the compression-enabled one from soc/intel/common, but moved to drivers/intel/gma. The rationale (besides making all the Kconfig fluff easier) is that drivers/intel/gma is used in some capacity on all platforms that load a VBT, while soc/intel/common's VBT code is for use with FSP. BUG=b:79365806 TEST=GOOGLE_FALCO and GOOGLE_CHELL both build, exercising both affected code paths. Change-Id: I8d149c8b480e457a4f3e947f46d49ab45c65ccdc Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/26039 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09{device,drivers,lib,mb,nb}: Use only one space after 'if'Elyes HAOUAS
Change-Id: I390191fb58605d1bd6a2e5d19a9dfa7c8493e6b2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-08drivers/aspeed/ast2050: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I31f53f5f0e3f1fd6bd9bdbb47ea67c12b3840850 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-08drivers/xgi/z9s: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ia9c705d34b90ad44272a06790fbb1041029ef77d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26069 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-04drivers/ricoh/rce822: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: I6f6c4330ad88e013b24761a3aa1c29bc869da39d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-04drivers/uart/oxpcie.c: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: If2b9cbf130f963bc1bedef16b7951e9546054743 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-04src/drivers/lenovo/wacom.c: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: Idb139d5cb2ac10f4051407137242ccee1a09b785 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-04drivers/intel/i210.c: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: If9c122efbb7dbab7d834372da3c1c70463be7a77 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-04drivers/intel/gma/opregion.c: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: Idff2ec30f0b8c9a49f4369e231be92cbc8070dc0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-04drivers/i2c/da7219: Add mclk-name propertyAkshu Agrawal
Non-dts based systems can pass mclk to da7219 driver by this property. BUG=b:74570989 TEST=Enabled clock in kernel driver using the property Change-Id: I2e10769e5b3c6b3aa30f340fe0e88c29b87430cb Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/25919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-02drivers/generic/bayhub: Add driver for BayHub BH720Simon Glass
Add a driver which puts the device into power-saving mode. BUG=b:73726008 BRANCH=none TEST=boot and see this message: BayHub BH720: Power-saving enabled 110103 From linux: $ iotools pci_read32 2 0 0 0x90 0x00110103 Change-Id: Idbfb114f3782c9386ce9b487c3abdb0afbc4a0d9 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/25966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-02src/drivers: Add reset/enable/stop_off_ms variables to ACPI devicesShelley Chen
Some touchscreens need to adhere to certain timings during the power off sequence as well as during the power on sequence. Adding reset_off_delay_ms, enable_off_delay_ms, and stop_off_delay_ms to accommodate these devices. BUG=b:78311818 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: Idb4a5dbe56eee4749d2f2b514e92c28fb2c6078f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/25882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-02intel/common: compress VBTPatrick Georgi
It's pretty well compressible which helps when space is tight. The code encodes the assumption that the VBT is 8kb or less. Haven't seen a larger one yet. BUG=b:77971803,b:78541692 TEST=build, see that vbt.bin is compressed, boot, check log that the reported VBT size is correct. Change-Id: Ie25bca21d9edc408f441a292bbe2ab0459948ec4 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/25927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-01drivers/intel/fsp2_0: Include MP services header for UDK2017 supported platformSubrata Banik
BRANCH=none BUG=b:74436746 TEST=Able to include EFI_MP_SERVICES_PPI without any error. Change-Id: I5add8e533dfd3f6d03abf7b2ca1a83f81f1c5920 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-29drvs/lenovo/wacom: Clean ACPI codePatrick Rudolph
Use acpigen method to return _STA instead of hardcoding unreadable bytecode. Change-Id: I290fb918675857e8ef798e3ab820bcfbdc6f5bdc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-27drivers/usb: Add spaces around '=='Elyes HAOUAS
Change-Id: If72ce868cdd06183e5055deb94b9d0cf12ed8738 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25858 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-27drivers/i2c/lm63: Remove unneeded headersElyes HAOUAS
Change-Id: Id13eef7f0fca0b929372490859aa4734ea7a9f23 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-27drivers/i2c/adm1026: Remove unneeded headersElyes HAOUAS
Change-Id: Iaed9c0882847511642d8eaab25e10d1ecf24bf90 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-27drivers/i2c/adm1027: Remove unneeded headersElyes HAOUAS
Change-Id: I147b3a2c79cd5e6b0e5fa3d23221a6afda8ba8f7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-27drivers/asmedia: Add ASPM blacklistNico Huber
To be selected by mainboard Kconfig if the board hosts an ASMedia chip that spuriously advertises ASPM features. Change-Id: I05f9789bc14db56d2ac085f4f14047d80c3aefb5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/25619 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-27drivers/uart: Allow the 8250IO driver only on x86Jonathan Neuschäfer
The driver relies on I/O space access functions (inb, etc.), which are only available on x86. Rather than explicitly disallowing it on ARM, allow it only on x86. TEST=Configure for RISC-V, and see that "Serial port on SuperIO" is not available in the "Generic Drivers" menu anymore. Change-Id: Ib8e8c402264afeba6dc098683c5464af6edb3ba3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-04-26src: Fix a typo on "mtrr"Elyes HAOUAS
Change "mttrs" to mtrrs. Change-Id: I4e5930cdcba5e8f5366bb2d4ebbcb659c0c2eb27 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-26drivers/i2c/ck505: Remove unneeded headersElyes HAOUAS
Change-Id: Ic525c92e73097752a7c690186dc2034785cac678 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25821 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26drivers/uart: Add helper function to allow bit-bangingJulius Werner
In some cases it may be useful to be able to bitbang a UART, such as during early bring-up when a driver for the actual controller isn't available yet. On some platforms we may even want to use this permanently, such as on the SDM845 where the hardware UART controller needs to have firmware loaded and is thus unavailable for most of the bootblock. This patch adds some helper code that makes it easy to implement this on a platform, you just have to pass it a function to control the Tx pin state and it will do the rest. It relies on the mono_time API and is thus bound to microsecond timing granularity, but that seems to be barely good enough for 115200 baud if the bit times are calculated carefully. Change-Id: If7dcecc7b8a95ec15f456efd2ec1f1e0dde239b4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25812 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-25drivers/uart: Add a driver for SiFive's UARTJonathan Neuschäfer
This UART is used in the SiFive FU540 SoC, and will probably be used in other SoCs in the future. Change-Id: I915edf39666b7a5f9550e3b7e743e97fe3cacfd3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-23drivers/spi: reduce confusion in the APIAaron Durbin
Julius brought up confusion about the current spi api in [1]. In order alleviate the confusion stemming from supporting x86 spi flash controllers: - Remove spi_xfer_two_vectors() which was fusing transactions to accomodate the limitations of the spi controllers themselves. - Add spi_flash_vector_helper() for the x86 spi flash controllers to utilize in validating driver/controller current assumptions. - Remove the xfer() callback in the x86 spi flash drivers which will trigger an error as these controllers can't support the api. [1] https://mail.coreboot.org/pipermail/coreboot/2018-April/086561.html Change-Id: Id88adc6ad5234c29a739d43521c5f344bb7d3217 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-16drivers/pc80/tpm: Add some optional delay to tis_readresponse()Bill XIE
Certain TPMs (observed on Infineon SLB9635 installed on revolve 810 g1) seem to need some delay between tis_wait_valid() and tis_has_valid_data(), or tis_has_valid_data() may invalidly return 0, ending the loop immaturely with some bytes left unread, and fail to pass the check below, causing the current command not finalized by tis_command_ready(), and blocking any later tis_wait_ready(). This time the added delay is controlled by a Kconfig option TPM_RDRESP_NEED_DELAY. Change-Id: Ic2a2f252e72a0bbce51e2863f8e46647b1570ba5 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/25322 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 04:14:32 +0000