summaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2014-07-17misc,ASL: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I5060052e268c6a6303d77fdf4380a55ac2ad5ae2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6296 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-07-14AGESA fam15: Fix entry to cimx/sb900Kyösti Mälkki
Move SB900 call to match comments and changes already made for family14 et al. Change-Id: I22aa0bbeeabf9cff929c49c23014005bc3d53ccb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6238 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AGESA CIMx: Move late init out of get_bus_conf()Kyösti Mälkki
Followup deals further with Fam15 case. For unknown reasons calls were commented out for amd/dinar and they remain that way. Change-Id: Ie0a25fbb6f5378019fbf0f19a02acf024d79817e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6237 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AGESA: Trace execution with AGESAWRAPPER()Kyösti Mälkki
Implement logging just once to have uniform output. Change-Id: I8db694a3bf6b1af459bdf98f7acb99edf4dd07f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6180 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-14AMD SPI: Optimise for longer writesKyösti Mälkki
Leave it to the implementation of flash->write() to split the writes to match SPI controller and SPI flash part restrictions. This allows for some optimisation for auto-address-increment (AAI) commands. Kconfig AMD_SB_SPI_TX_LEN can be kept as local. Change-Id: I4a8bc55ab7eb0eeda8f25003a8f5ff2a643ab7a7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6164 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-11src: Make use of 'CEIL_DIV(a, b)' macro across treeEdward O'Callaghan
The objective here is to tighten coreboot up a bit by not repeating common helpers. This makes the code base more consistent and unified/tight. Change-Id: Ia163eae68b4a84a00ed118125e70308fab1cea0c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6215 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-07-10intel/haswell: add vmx support w/Kconfig optionMatt DeVillier
patch based on VMX support in intel/fsp_model_206ax and intel/model_6fx tested/verified working on google/panther Change-Id: I61232fdc2a29c53aa3bea5ea78b2fdc41fd7396a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/6223 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-08cpu: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I9004f34ba0c13b4489b26ac8c1476d00a6c6d01d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6207 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-05spi: Change spi_xfer to work in units of bytes instead of bits.Gabe Black
Whenever spi_xfer is called and whenver it's implemented, the natural unit for the amount of data being transfered is bytes. The API expected things to be expressed in bits, however, which led to a lot of multiplying and dividing by eight, and checkes to make sure things were multiples of eight. All of that can now be removed. BUG=None TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI errors in the firmware log. Built for rambi. BRANCH=None Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/192049 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> [km: cherry-pick from chromium] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6175 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-05spi: Remove unused parameters from spi_flash_probe and setup_spi_slave.Gabe Black
The spi_flash_probe and and spi_setup_slave functions each took a max_hz parameter and a spi_mode parameter which were never used. BUG=None TEST=Built for link, falco, rambi, nyan. BRANCH=None Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/192046 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> [km: cherry-pick from chromium] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6174 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-05Drop redundant select CACHE_AS_RAMKyösti Mälkki
The few remaining boards without CAR override this with select ROMCC. Change-Id: Ifd5223e67f6a2dadb47846bdaab40b1be763cf69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6172 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-05intel: Make monotonic timer a first class citizenEdward O'Callaghan
The monotonic time now needs to be a first class citizen in Coreboot as it is a hard dependency of the drivers/spi flash command polling function. Change-Id: I4e43d2680bf84bc525138f71c2b813b0f6be5265 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6135 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-07-03AGESA: Call get_bus_conf() just onceKyösti Mälkki
Instead of calling get_bus_conf() three times from write_tables() and executing it once, just make one call before entering write_tables(). Change-Id: I818e37128cb0fb5eaded3c1e00b6b146c1267647 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6133 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA: Add agesawrapper_post_device()Kyösti Mälkki
NOTE: The procedure is moved across a collected timestamp TS_WRITE_TABLES, so the delay of SPI erase/write will be accounted for in an earlier entry in cbmem -t output. Change-Id: I0f082e7af1769c8d7d03cdd51fdb5dacbf3402b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6132 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA boards: Use acpi_s3_resume_allowed()Kyösti Mälkki
This adds use of BROKEN_CAR_MIGRATE to include CBMEM symbols for the build of romstage also for boards without HAVE_ACPI_RESUME. These symbols got exposed as the use of preprocessor directives was reduced. We expect the linker to do a fair job and optimize away function bodies that are on unreachable execution paths. Change-Id: Ibf5181d3eecb87ce647abe0be01072594b05aa5f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6067 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-03AGESA: Clean separation of SPI flashKyösti Mälkki
To be precise, wakeup from S3 does not involve SPI writing, while preparing for it on cold power-ons currently does. For S3DataTypeMtrr storage is changed such that the first 4 bytes is the length of data stored like with the other two S3DataType. Change-Id: Id920650474530d4191075da4ef70daa66c904c5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6085 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-07-03AGESA boards: Add prepare_for_resume()Kyösti Mälkki
Use one common implementation for all AGESA platforms. Change-Id: I410f8e0a9c75445882d67659cde00004eb7ad6b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6084 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-03AGESA S3: Refactor S3 backup store locations in SPIKyösti Mälkki
Prepare code to locate S3 backup from CBFS as a file. Follow-up will replace remaining use of CONFIG_S3_DATA_POS with cbfs_get_file_content(). Change-Id: I693c41c90e61d1a7c7b10e43c9f264d099c9a400 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6083 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-06-30x86 MTRR: Drop unused return valueKyösti Mälkki
It was never well-defined what value this function should return. Change-Id: If84aff86e0b556591d7ad557842910a2dfcd3b46 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6166 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-30Use MTRR definesKyösti Mälkki
Change-Id: I60ae6dcb8c3b280fe74f27f4d61de70cc1ba190b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6123 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-29cpu/x86/pae/pgtbl.c: Unsigned comparison < 0 always falseEdward O'Callaghan
Comparison of unsigned expression < 0 is always false. Change-Id: Idf4e7846b50f4376a5d33515681efbd773d1caca Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6146 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-29cpu/amd/geode_gx2/cache_as_ram.inc: Remove illegal ASCII artEdward O'Callaghan
Embedding comments inside comments is illegal in the C specification, Clang enforces this. Change-Id: I0a468e4196034b00dfc5860fdbbab7788e4fef77 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6154 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-28Don't add .eh_frame sections to SMM imagePatrick Georgi
We don't need exception handlers and they waste space. Change-Id: I98a34d1c9638e8c4168edbfb4b1cddde8a64623f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6105 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-25AGESA: Move config parameters for non-volatile S3 dataKyösti Mälkki
These parameters are not specific to the southbridge device, but the implementation of S3 storage defined by CPU code. Change-Id: Ic341cc2b7669cf8e3e920c48473826ec03fc7d8d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6081 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-25Declare acpi_is_wakeup_early() only onceKyösti Mälkki
Change-Id: I5314d76168c40a6327d4a9ac3b4f4fb05497d6fc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4525 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21cpu/amd/agesa: Use acpi_is_wakeup()Kyösti Mälkki
Change test to return true on S2 wakeup too. In S2 CPU would have been powered down so MTRR recovery is required. Change-Id: I6ad5fb7e32c59be7d84f28461c238c3975e1e04e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6078 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-21Misc: Use acpi_is_wakeup_s3()Kyösti Mälkki
Change-Id: I46906e6d68775edc5cfe199cfeb465db4da2691f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6072 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-17intel/model_2065x: Add 20652 microcode.Vladimir Serbinenko
Change-Id: I2a46806a3f0a57497edebd49e69b97f90948adb9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5117 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-06-06AGESA: Use common heap allocatorKyösti Mälkki
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5689 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-30cpu/intel/fsp_model_206ax: change realpath to readlinkMartin Roth
realpath and readlink can be used to do the same thing - in this case we're turning path1/path2/../path3/path4 into path1/path3/path4 so that the makefile's wildcard routine can evaluate it. Debian derivatives don't seem to include realpath. (and even when it's installed, it's not the gnu coreutils version.) Change-Id: I0a80a1d9b563810bdf96aea9d5de79ce1cea457a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/5793 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-05-19build: use CFLAGS_* in more places where they're neededPatrick Georgi
After moving out -m32 from CC_*, 64bit compilers need CFLAGS_* in more places to handle everything in 32bit as appropriate. Change-Id: I692a46836fc0ba29a3a9eb47b123e3712691b45d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5789 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-17build: separate CPPFLAGS from CFLAGSPatrick Georgi
There are a couple of places where CPPFLAGS are pasted into CFLAGS, eliminate them. Change-Id: Ic7f568cf87a7d9c5c52e2942032a867161036bd7 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5765 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-17build: CPPFLAGS is more common than INCLUDESPatrick Georgi
Rename INCLUDES to CPPFLAGS since the latter is more commonly used for preprocessor options. Change-Id: I522bb01c44856d0eccf221fa43d2d644bdf01d69 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5764 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-13cpu/intel: Add CPU socket rPGA988BZaolin
Used by the Lenovo ThinkPad T520 Change-Id: I1009616cc4c18ebd0e3be7ceb50398617b49e3a3 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: http://review.coreboot.org/5671 Reviewed-by: Idwer Vollering <vidwer@gmail.com> Tested-by: build bot (Jenkins)
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
Lines with 'select SERIAL_CPU_INIT' where redundant with the default being yes. Since there is no 'unselect SERIAL_CPU_INIT' possibility, invert the default and rename option. This squelches Kconfig warnings about unmet dependencies. Change-Id: Iae546c56006278489ebae10f2daa627af48abe94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5700 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-09cougar_canyon2: Switch CPU/NB/SB to the shared FSP codeMartin Roth
CPU - fsp_model_206ax: - Remove Kconfig options and mark this as using the FSP. - Use shared FSP cache_as_ram.inc file Mainboard - intel/cougar_canyon2: - Update to use the shared FSP header file. - Modify to call copy_and_run() directly instead of returning to cache_as_ram.inc. Northbridge - fsp_sandybridge: - remove mrccache, fsp_util.[ch] - add fsp/chipset_fsp_util.[ch] with chipset specific FSP bits. - Update to use the shared FSP header file. These changes were validated with FSP: CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd SHA256: e1bbd614058675636ee45f8dc1a6dbf0e818bcdb32318b7f8d8b6ac0ce730801 MD5: 24965382fbb832f7b184d3f24157abda Change-Id: Ibc52a78312c2fcbd1e632bc2484e4379a4f057d4 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5636 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-09Intel FSP: add a shared set of functions for the FSPMartin Roth
- Move the non chipset-specific fsp pieces out of the chipset into a shared area. This is used by northbridge / southbrige / SOC code. It pulls in pieces from Kconfig, Makefile and FSP specific code. - Enabled in the CPU code with a Kconfig "select PLATFORM_USES_FSP" Change-Id: I7ffa934c1df09b71d48a876a56e3b888685870b8 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5635 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-05haswell: move to mp_init libraryAaron Durbin
The mp_init library was based off of haswell code, but baytrail was the first chipset to take advantage of it. Move haswell over to using it so that the code duplication can be removed. Change-Id: Id6e9464df028aa6ec138051f925817c85b4c13e5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5413 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-30console: Move UART port defaults to mainboardKyösti Mälkki
Correct selection of UART depends of board layout, not the CPU internals, so default setting should originate from mainboard. Change-Id: Ibf0ab0847ccce73c22704e86983dbe3d24ebc8a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5618 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30console: Drop EARLY_CONSOLE optionKyösti Mälkki
We have means to easily disable a specific console in romstage if necessary, so this global option makes little sense. The option was initially introduced as a work-around for build issues around CACHE_AS_RAM, ROMCC and ARCH_ARMV7 dependencies for UARTs. Change-Id: I797bdd11a48ddd813d3ee7ccef9a0c050f16f669 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5607 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30allwinner/a10: Hide SoC specific UART functionsKyösti Mälkki
If platform has a component coreboot has to communicate with using one of the UARTs, that device would not be part of the SoC and must not use functions specific to a10 UART. Change-Id: Ifacfc94dfde9979eae0b0cfb723a6eaa1fbcd659 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5469 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30uart: Support multiple portsKyösti Mälkki
The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-29AGESA SPI: Fix Kconfig optionsKyösti Mälkki
Option AMD_SB_SPI_LEN leaked to non-AMD configs. Option SPI_FLASH is compulsory with HAVE_ACPI_RESUME. Change-Id: Ib84c4d9e4fdf670b32b0cae7280fcbb6d3aecaf5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5606 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-28AMD: Add common header file for CAR setupKyösti Mälkki
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4683 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-04-26Rename coreboot_ram stage to ramstageFurquan Shaikh
Rename coreboot_ram stage to ramstage. This is done in order to provide consistency with other stage names (bootblock, romstage) and to allow any Makefile rule generalization, required for patches to be submitted later. Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5567 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26Get rid of HAVE_INIT_TIMER config optionFurquan Shaikh
There is redundancy in terms of use of init_timer. We have a Kconfig option to decide whether a board has init_timer as well as we use a stub for init_timer in places where we do not have any init_timer defined. Thus, remove the Kconfig option. Henceforth, all boards that do not have init_timer functionality can include a stub_timer if required. Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5569 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-20Move MAX_PHYSICAL_CPUS to AMD k8 and fam10Kyösti Mälkki
This was always AMD-only and it was never properly used with AGESA. Change-Id: Ifb461ee845e442f6cf90aca52470cfb66e862bfc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5540 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Use romstage code for ramstage and SMMKyösti Mälkki
Console is arch-agnostic and there is no need for separate implementations for romstage and ramstage. For SMM there is console only if DEBUG_SMI is selected. Change-Id: I7028eeeff8bfbb9c8552972436b29a7508834d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5338 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-16cpu/amd/agesa/family15tn: Add udelay implementation for SMMAlexandru Gagniuc
This is a small implementation which uses only MSRs and rdtsc, without relying on northbridge or other system hardware. It's SMM safe in that it only reads registers, and doesn't modify the state of the hardware. Change-Id: Ifa02ca73455b382f830c9b30b80b4f1bb18706b4 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5501 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-16cpu/amd/agesa/family15tn: Add initial support for SMM modeAlexandru Gagniuc
This is the minimal setup needed to be able to execute SMI handlers. Only support for ASEG handlers is added, which should be sufficient for Trinity (up to 4 cores). There are a few hacks which need to be introduced in generic code in order to make this work properly, but these hacks are self-contained. They are a not a result of any special needs of this CPU, but rather from a poorly designed infrastructure. Comments are added to explain how such code could be refactored in the future. Change-Id: Iefd4ae17cf0206cae8848cadba3a12cbe3b2f8b6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5493 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-15vendorcode/amd/agesa/fam14: Build as a static libraryEdward O'Callaghan
Following the same reasoning as commit ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library Since AGESA is stage-independent, we can build it just once, and use the resulting static library in both rom and ram stages. Change-Id: I8b78c462f4963fbb3a40d739196529fffedccb4c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5441 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-15vendorcode/amd/agesa/fam15tn: Build as a static libraryAlexandru Gagniuc
Up until now, we were building AGESA by specifying each AGESA source file and adding it to the list of romstage and ramstage source files. As a result, we were compiling each AGESA source twice, despite the fact that it does not depend on the stage we're in. Since AGESA is stage-independent, we can build it just once, and use the resulting static library in both rom and ram stages. We still keep the practice of specifying every single AGESA directory as an include dir and adding the AGESA CFLAGS to our global CFLAGS; this is needed due to the way AGESA builds. Change-Id: I9b23264129d1c08cb67cabc31d15a68d43ed7624 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5430 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-13cpu/amd/agesa/s3_resume.c: Specify include paths from AGESA_ROOTAlexandru Gagniuc
Following the same reasoning as in commit * 1d87dac hp/pavilion_m6_1035dx: Sanitize #includes include AGESA files with a path relative to AGESA_ROOT. We cannot with more than one generation of AGESA, hence the path being relative to AGESA_ROOT. Change-Id: If15c4cbfd42e0264264fdb3e8c426a47609ad41f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5426 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-12agesa: Always include family* KconfigPatrick Georgi
Otherwise we generate a recursive dependency because CPU_AMD_AGESA depends on the per-family configurations while those only exist if CPU_AMD_AGESA is selected. Change-Id: Ic08d517ff4ca8bb76afc1574b55c54b28ec3f1b0 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5490 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-09console: Move newline translation outside console_tx_byteKyösti Mälkki
This gives us completely transparent low-level function to transmit data. Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5336 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09uart: Redefine Kconfig optionsKyösti Mälkki
Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-09console uart: Fill coreboot table entriesKyösti Mälkki
Also fixes the reported baudrate to take get_option() into account. Change-Id: Ieadad70b00df02a530b0ccb6fa4e1b51526089f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5310 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09uart: Prepare to support multiple base addressesKyösti Mälkki
Prepare low-level register access to take UART base address as a parameter. This is done to support a list of base addresses defined in the platform. Change-Id: Ie630e55f2562f099b0ba9eb94b08c92d26dfdf2e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5309 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-09cpu/amd/car: Use define MSR_MCFG_BASE rather than hardcoded valuePatrick Georgi
Change-Id: I0b40c9811115b204f1cae70546d236049c1b3d30 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5431 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-03amd/agesa/s3_resume: Make compiler agnostic.Edward O'Callaghan
Clang does not like inline functions defined in C files with prototypes in headers. Rather Clang expects inline function bodies to be in headers if they are to be used out of scope. Since inline is purely advisory to the compiler, drop its usage here. Change-Id: I08a7a3d2cdf841ffbab10c017c75917768aac209 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5429 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-04-01x86: use car_(get|set)_var accessors for apic timerAaron Durbin
The timer_fsb variable was not correctly being accessed in the presence of cache-as-ram. The cache-as-ram backing store could be torn down but then udelay() could be called causing hangs from accessing variables that have unknown values. Instead change the timer_fsb variable to g_timer_fsb and obtain the value through a local access method that does the correct things to obtain the correct value. Change-Id: Ia3e30808498cbe4a7f6f116c17a8cf1240a807a3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5411 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-04-01Static CBMEM / CAR: Flag boards with BROKEN_CAR_MIGRATEKyösti Mälkki
Use of CAR_GLOBAL is not safe after CAR is torn down, unless the board properly implements EARLY_CBMEM_INIT. Flag vulnerable boards that only do cbmem_recovery() in romstage on S3 resume and implementation with Intel FSP that invalidates cache before we have a chance to copy the contents. Change-Id: Iecd10dee9b73ab3f1f66826950fa0945675ff39f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5419 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-03-29cubieboard: Enable the SD controller and mux SD pinsAlexandru Gagniuc
This step needs to be done before calling any MMC functionality. Change-Id: I88763072c8a541ddba794e79fb55e82eb2f187a9 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4745 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-03-20rmodules: use rmodtool to create rmodulesAaron Durbin
Start using the rmodtool for generating rmodules. rmodule_link() has been changed to create 2 rules: one for the passed in <name>, the other for creating <name>.rmod which is an ELF file in the format of an rmodule. Since the header is not compiled and linked together with an rmodule there needs to be a way of marking which symbol is the entry point. __rmodule_entry is the symbol used for knowing the entry point. There was a little churn in SMM modules to ensure an rmodule entry point symbol takes a single argument. Change-Id: Ie452ed866f6596bf13f137f5b832faa39f48d26e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5379 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-03-16Make POST device configurable.Idwer Vollering
Change-Id: If92b50ab3888518228d2d3b76f5c50c4aef968dd Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4561 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-07x86: add MIRROR_PAYLOAD_TO_RAM_BEFORE_LOADING optionAaron Durbin
Boot speeds can be sped up by mirroring the payload into main memory before doing the actual loading. Systems that would benefit from this are typically Intel ones whose SPI are memory mapped. Without the SPI being cached all accesses to the payload in SPI while being loaded result in uncacheable accesses. Instead take advantage of the on-board SPI controller which has an internal cache and prefetcher by copying 64-byte cachelines using 32-bit word copies. Change-Id: I4aac856b1b5130fa2d68a6c45a96cfeead472a52 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5305 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04console: Use single driver entry for UARTsKyösti Mälkki
UARTs now have unified prototypes and can use a single entry in the list of drivers for ramstage. Change-Id: I315daaf9a83cfa60f1a270146c729907a1d6d45b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5308 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04SMM: Only have console with DEBUG_SMIKyösti Mälkki
Existing code compiled serial communication and printk() for SMM even when DEBUG_SMI was not selected. Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5142 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-03-04uart8250: Move under drivers/uartKyösti Mälkki
Change-Id: Ic65ffaaa092330ed68d891e4a09a8b86cdc04a3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5236 Tested-by: build bot (Jenkins)
2014-03-04uart8250mem: Unify calls with generic UARTKyösti Mälkki
NOTE: UART base for SMM continues to be broken, as it does not use the address resource allocator has assigned. Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250io: Unify calls with generic UARTKyösti Mälkki
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04ti/am335x: Fix baudrate calculationKyösti Mälkki
UART input clock is platform dependent. Also account for possible use of get_option() where baudrate is not compile-time constant. The hardware reference on BeagleBone is from a 48 MHz oscillator input. With pre-divisor of 16 we get same register values as in table 19-25. Change-Id: I89aee27c958f8618ce79a968ae7520a867e7e8a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5290 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04allwinner/a10: Fix baudrate calculationKyösti Mälkki
UART input clock is platform dependent. Also account for possible use of get_option() where baudrate is not compile-time constant. Change-Id: Ie1c8789ef72430e43fc33bfa9ffb9f5346762439 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5289 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04samsung/exynos5: Fix baudrate calculationKyösti Mälkki
Account for possible use of get_option() when baudrate is no longer compile-time constant. Change-Id: Ib45acd98e55c5892dbce9903830665aefeda5be0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5288 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart: Drop HAVE_UART_MEMORY_MAPPEDKyösti Mälkki
This option is used to make uart8250mem option visible in menuconfig. Showing it for these ARMs is incorrect. Change-Id: I2c28e1c3781df41c09c365355a5105c9fe4945ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5259 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart: Do not guard entire include file by config optionsKyösti Mälkki
Do not guard the file by CONFIG_CONSOLE_SERIAL8250 or CONFIG_CONSOLE_SERIAL8250MEM or CONFIG_CONSOLE_SERIAL. Don't do indirect includes for <uart8250.h>. The config-specific options are already properly guarded, and there is no need to guard the register and bit definitions. Change-Id: I7528b18cdc62bc5c22486f037e14002838a2176e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4585 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-25Remove CACHE_ROM.Vladimir Serbinenko
With the recent improvement 3d6ffe76f8a505c2dff5d5c6146da3d63dad6e82, speedup by CACHE_ROM is reduced a lot. On the other hand this makes coreboot run out of MTRRs depending on system configuration, hence screwing up I/O access and cache coherency in worst cases. CACHE_ROM requires the user to sanity check their boot output because the feature is brittle. The working configuration is dependent on I/O hole size, ram size, and chipset. Because of this the current implementation can leave a system configured in an inconsistent state leading to unexpected results such as poor performance and/or inconsistent cache-coherency Remove this as a buggy feature until we figure out how to do it properly if necessary. Change-Id: I858d78a907bf042fcc21fdf7a2bf899e9f6b591d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5146 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-24TI am335x: Apply Kconfig use conventionsKyösti Mälkki
Change-Id: Ic3c26fd7b1dd8a6731abc9a63b9ca17e084074b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5291 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-02-24CAR_GLOBAL: enforce compiler to check if _start != _endEdward O'Callaghan
There are some fun rules C compilers can use to optimize their code. One of them is the assumption that two symbols point to two different addresses. In this case this wasn't true, resulting in unintended code execution (and later, a crash) with a clang build. Change-Id: I1496b22e1d1869ed0610e321b6ec6a83252e9d8b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4719 Tested-by: build bot (Jenkins)
2014-02-20intel/model_2065x: Fix APICID generation.Vladimir Serbinenko
APIC IDs always step by 4 on 2065x independently of number of threads. Change-Id: I5abd4005c8ce1740bb0862d952af66236b609aa8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5262 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-20SMM: Fixes for DEBUG_SMIKyösti Mälkki
Get the required UART includes directly. The ne2k part is old copy-paste leftover. Change-Id: Ifd9253abb5a50b515887459faf06b63f907eeda9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5258 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-19x86 bootblock: improve clang compatibilityPatrick Georgi
Its linker doesn't like "." arithmetics, so use .org, while its assembler doesn't like data32 prefixes. Change-Id: I3f5bbb350493d6510b8013df15d44c44c5db63c7 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4714 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-02-16haswell: backup the default SMM region on resumeAaron Durbin
Haswell CPUs need to use the default SMM region for relocating to the desired SMM location. Back up that memory on resume instead of reserving the default region. This makes the haswell support more forgiving to software which expects PC-compatible memory layouts. Change-Id: I9ae74f1f14fe07ba9a0027260d6e65faa6ea2aed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5217 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-16x86: provide infrastructure to backup default SMM regionAaron Durbin
Certain CPUs require the default SMM region to be backed up on resume after a suspend. The reason is that in order to relocate the SMM region the default SMM region has to be used. As coreboot is unaware of how that memory is used it needs to be backed up. Therefore provide a common method for doing this. Change-Id: I65fe1317dc0b2203cb29118564fdba995770ffea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5216 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-15coreboot: infrastructure for different ramstage loadersAaron Durbin
There are 2 methods currently available in coreboot to load ramstage from romstage: cbfs and vboot. The vboot path had to be explicitly enabled and code needed to be added to each chipset to support both. Additionally, many of the paths were duplicated between the two. An additional complication is the presence of having a relocatable ramstage which creates another path with duplication. To rectify this situation provide a common API through the use of a callback to load the ramstage. The rest of the existing logic to handle all the various cases is put in a common place. Change-Id: I5268ce70686cc0d121161a775c3a86ea38a4d8ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5087 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-13cpu/allwinner/a10: Add minimal ramstage driverAlexandru Gagniuc
Change-Id: I857755976b17b0e492c086162f395a77933eeed8 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4698 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-12PCI: Drop includes under cpuKyösti Mälkki
The files affected do not make any PCI configuration calls. If they did, the more correct includes would be pci_ops.h, pci_defs.h and pci_ids.h. Change-Id: I3e7f009371be6ea50318eaabf0c15500cb3f1210 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5200 Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-11SMP: Add arch-agnostic boot_cpu()Kyösti Mälkki
We should not have x86 specific includes in lib/. Change-Id: I18fa9c8017d65c166ffd465038d71f35b30d6f3d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5156 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-09mtrr: only add prefetchable resources as WRCOMB for VGA devicesAaron Durbin
Be more conservative and only add VGA devices' prefetchable resources as write-combining in the address space. Previously all prefetchable memory was added as a write-combining memory type. Some hardware incorrectly advertises its BAR as prefetchable when it shouldn't be. A new memranges_add_resources_filter() function is added to provide additional filtering on device and resource. Change-Id: I3fc55b90d8c5b694c5aa9e2f34db1b4ef845ce10 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5169 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2014-02-06ARMv7: Remove static CBMEM allocationKyösti Mälkki
The calculations for static allocation are no longer valid. Change-Id: I6740cdcec789abddf78485a0edaf24882ef8c2a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4569 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-02-06usbdebug: Drop obsolete codeKyösti Mälkki
Change-Id: I918ca1d0d0d7bcb7e16d41a12830a0357f15b8ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5130 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-06MTRR: Mark all prefetchable resources as WRCOMB.Vladimir Serbinenko
Change-Id: I2ecfd9733b65b6160bc2232d22db7b16692a847f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5149 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-06mtrr: retry fitting w/o WRCOMB if usage exceeds BIOS allocationAaron Durbin
If the MTRR usage exceeds the BIOS allocation for MTRR usage re-try without the WRCOMB type. Change-Id: Ie70ce84994428ff6700c36310264c3c44d9ed128 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5151 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2014-02-03cpu/amd/model_fxx: Add coolnquiet for two new (old) AMD K8 modelsOskar Enoksson
The added CPU's are OSA248CEP5AU and a OSP280 processors. The OSP280 VID/FID numbers have been found by experimentation and extrapolation/guesses from similar models. It has been verified to work fine under Linux (OpenSuse 12.2, kernel 3.4.63-2.44) with four different test-processors. Windows is untested. Change-Id: I3afa1cba5f55c8a78917b3636382af7706a80fee Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/5095 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-02-01cpu/intel/model_2065x: Add model 20652Vladimir Serbinenko
Found in some X201t. Tested on X201t. Change-Id: I3fc4c3f5b1abf9fe61746ab8f401d1b6ee67f3ea Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5090 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-30cpu/intel: allow non-packaged scoped turbo settingAaron Durbin
In the past the turbo disable setting (bit 38) of the IA32_MISC_ENABLES msr has been package scoped. That means knocking the turbo disable bit down enabled turbo for the entire package. Sadly, that's no longer true on all Intel processors. Therefore, allow non-packaged scoped turbo setting by introducing the CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED Kconfig option. It defaults to false which was the original assumption. BUG=chrome-os-partner:25014 BRANCH=baytrail TEST=Built and ran both ways successfully. Change-Id: I71a31e76ff47878023081fc47da643187517b597 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/182405 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5047 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-30x86: Add SMM helper functions to MP infrastructureAaron Durbin
In order for the cpu code to start SMM relocation 2 new functions are added to be shared: - void smm_initiate_relocation_parallel() - void smm_initiate_relocation() The both initiate an SMI on the currently running cpu. The 2 variants allow for parallel relocation or serialized relocation. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted rambi using these functions. Change-Id: I325777bac27e9a0efc3f54f7223c38310604c5a2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173982 Reviewed-on: http://review.coreboot.org/4891 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 20:42:04 +0000