aboutsummaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2013-11-25haswell: check for clean resetAaron Durbin
When an INIT# is delivered to the CPU the CPU starts executing from the reset vector. However, the internal state is maintained. Therefore, check for such a condition and reset the system. Issues 'apreset warm' on the EC console. INIT# is sent and CPU notices it's not a clean reset and forces one. No hangs. Change-Id: I71229e0e5015ba8c60f5989c533268604ecc1ecc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/57111 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4216 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25Support for nehalem northbridgeVladimir Serbinenko
Including raminit Change-Id: If1dd3855181481b8b928adf0fdb40b29d15897db Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4044 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25Support for Ibexpeak southbridgeVladimir Serbinenko
Part of X201 port. Change-Id: If17d707004aba9f08459dbd8f3a146fa3c076aa9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4052 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-24haswell: Update ULT microcode to 0x10Duncan Laurie
[ 1.503741] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x10 [ 1.510483] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x10 [ 1.517213] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x10 [ 1.523947] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x10 Change-Id: I19ef40b636eebeb8cc29cc0404abbe263ec8eaa7 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4165 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24haswell: Remove limit on package C-stateDuncan Laurie
With the XHCI controller enabled we no longer hang the system when dropping into a package C-state so remove the code that was disabling it. Change-Id: Icd60488fd2506dac04fb6ec96a77bec265b10d8c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50355 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4163 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24haswell: split microcode between ULT and non-ULTAaron Durbin
The current microcode blobs contain both ULT and non-ULT revisions. Only include one or the other based off of the CONFIG_INTEL_LYNXPOINT_LP Kconfig option. Change-Id: I3e4e41d4cd727b1a974361fb469267e6f6022d5a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50318 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4160 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24haswell: Update ULT microcode to rev 'a'Duncan Laurie
Change-Id: I714208da23bf7cbd1232874c05ad3100551f5f7c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49647 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4146 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24haswell: Configure PCH power sharing for ULTDuncan Laurie
This reads PCH power levels via PCODE mailbox and writes the values into the PMSYNC registers as indicated in the BWG. Change-Id: Iddcdef9b7deb6365f874f629599d1f7376c9a190 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49329 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4143 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24haswell: calibrate 24MHz clock against BCLKAaron Durbin
On haswell ULT systems there is a 24MHz clock that continuously runs when deep package c-states are entered. The 100MHz BCLK is shut down in the lower c-states. When the package wakes back up a conversion formula needs to be applied. The 24MHz calibration is done using the internal PCODE unit. Change-Id: I6be7702fb1de1429273724536f5af9125b98da64 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48292 Tested-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4136 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24haswell: configure c-statesAaron Durbin
The c-states are configured according to the BWG, however the package c-states are disabled as they currently cause platform instability. The exposed ACPI c-state to processor c-state mapping are as follows for ULT boards: ACPI(C1) = MWAIT(C1E) ACPI(C2) = MWAIT(C7S long latency) ACPI(C3) = MWAIT(C10) The non-ULT boards have an expoed c-state mapping: ACPI(C1) = MWAIT(C1E) ACPI(C2) = MWAIT(C3) ACPI(C3) = MWAIT(C7S) Included in this patch is removing the updating of current limit registers as some of the MSRs are different and the proper values are currently unknown. Lastly, some of the MSRs were renamed to match the BWG. Booted 3.8 kernel and used powertop to note package, core, and acpi c-state residency. Change-Id: Ia428d4a4979ba3cba44eb9faa96f74b7d3f22dfe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48291 Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4133 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
With the LynxPoint chipset there are more than 16 possible GPIOs that can trigger an SMI so we need a mainboard handler that can support this. There are only a handful of users of this function so just change them all to use the new prototype. Change-Id: I3d96da0397d6584f713fcf6003054b25c1c92939 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49530 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4145 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24dmp/vortex86ex: Move DMP specific POST code defines into one fileAndrew Wu
Move into src/cpu/dmp/dmp_post_code.h Change-Id: If9f4d842f352eb41618e71f49a226d3cc4ad0b46 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3989 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24haswell: Put each logical processor in its own P-state domainDuncan Laurie
The recommendation from Intel is to report each core as a separate logical domain in the _PSD table. This goes against the recommendation in the ACPI specification because all of these cores are on the same package and share a VR so they will do voltage transitions together. The reasoning is that with a larger number of logical processors the P-state often ramps too quickly resulting in higher power consumption. By exposing each core as a separate domain the OS can manage them individually allowing the socket to select the optimum frequency. $ cat /sys/firmware/acpi/tables/SSDT > /tmp/SSDT $ iasl -d /tmp/SSDT Processor (\_PR.CPU0, 0x00, 0x00000000, 0x00) { Name (_PSD, Package (0x01) { Package (0x05) { 0x05, 0x00, 0x00000000, 0x000000FE, 0x00000001 } }) } Processor (\_PR.CPU1, 0x01, 0x00000000, 0x00) { Name (_PSD, Package (0x01) { Package (0x05) { 0x05, 0x00, 0x00000001, 0x000000FE, 0x00000001 } }) } Processor (\_PR.CPU2, 0x02, 0x00000000, 0x00) { Name (_PSD, Package (0x01) { Package (0x05) { 0x05, 0x00, 0x00000002, 0x000000FE, 0x00000001 } }) } Processor (\_PR.CPU3, 0x03, 0x00000000, 0x00) { Name (_PSD, Package (0x01) { Package (0x05) { 0x05, 0x00, 0x00000003, 0x000000FE, 0x00000001 } }) } Change-Id: I5ef41b6ead4d88e9ba117003293dbc629c376803 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48662 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4130 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24haswell: Update microcode for ULT/40651 to rev 8Duncan Laurie
$ cat /sys/devices/system/cpu/cpu*/microcode/version 0x8 0x8 0x8 0x8 Change-Id: Id6491ae96c516ae0b55471e53f79f0407cf3ffdb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48661 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4129 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-23Rename SANDYBRIDGE_BCLK to NEHALEM_BCLK in 2065x.Vladimir Serbinenko
2065x is with nehalem and not sandybridge. I don't care much eitherway but it clears some confusion. Change-Id: Ib2b8e570b830a12ed8d0d313ee4eb56755796d4b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4046 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-11-23Remove MRC variables from 2065x CAR init.Vladimir Serbinenko
2065x boards don't use MRC. And the space in question isn't used either. Read number of variable range MTRRs from MSR rather than hardcoding it. 2ff is still zeroed out as unless you zero-out undocumented bits as well boot fails. Tested on Lenovo X201. Change-Id: Ic574193094e7d27c2d6a4d7d3e387d989578532e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4080 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-11-22Don't wait on 2065xVladimir Serbinenko
The mdelay is not necessarry on 2065x. Tested on X201 that it works without delay. Change-Id: Ida9e85be7c214f3ba4c9476b5d8a0351e7980e5e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4083 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-11-21Fix error message on wrong compiles of 2065xVladimir Serbinenko
Current error message refers to sandybridge chipset. Instead error should be that 2065x needs Ibex Peak. Change-Id: I8cc8a34f496aec7af0ce95b4b65fd25e165f43fb Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4202 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-13intel/2065x: Use TSC for udelay()Vladimir Serbinenko
For the ram init of Intel Nehalem ram init we need a udelay implementation. Use common TSC framework for it as Intel Haswell already does. Change-Id: I360a6db1ec1ba32c92698a7d6f6968c93ead5c52 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4043 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-10-15vendorcode/amd/agesa/f16kb: Update Kabini PI from v1.0.0.0 to v1.0.0.7WANG Siyuan
The platform initialization (PI) code v1.0.0.7 for Kabini has some enhancements like ECC DIMM support, new CPU microcode rev 0700010B, FCH bug fix (RTC) and so on. Use the name Kabini instead of Kerala everywhere. Note, the former PI code was indeed version v1.0.0.0 instead of v0.0.1.0 as used in `AGESA_VERSION_STRING`. Change-Id: I186de1aef222cd35ea69efa93967a3ffb8da7248 Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3935 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-13Rename cpu/x86/car.h to arch/early_variables.hStefan Reinauer
and add an ARMv7 version. Change-Id: I14fbff88d7c2b003dde57a19bf0ba9640d322156 Signed-off-by: Stefan Reinauer <reinauer@google.com> [km: rebased fa004acf8 from chromium git] Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3939 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-10-03cpu/x86/mtrr/mtrr.c: Remove superfluous assignment to `type_index`Paul Menzel
When building coreboot with the Clang static analyzer scan-build, it reports »Value stored to 'type_index' is never read«. Indeed, in `memranges_each_entry()` `type_index` is assigned a value before being read. So remove that line. Change-Id: I6da2fb8be7157bb98c57281babd4a08ca0d9f7a7 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3953 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-28exynos5420: Fix build warningAllen Martin
Fix "set but not used" variable warning with gcc 4.7.3 Change-Id: Ia27291ecb4f993c4ba6f29b134167dc23a449bf5 Signed-off-by: Allen Martin <amartin@nvidia.com> Reviewed-on: http://review.coreboot.org/3949 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Gabe Black <gabeblack@chromium.org>
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps: Stash early timestamps in CAR_GLOBALKyösti Mälkki
Change-Id: I87b454c748cf885491d5b38bfe53a2ec0e9f38c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3910 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps intel: Move timestamp scratchpad to chipsetKyösti Mälkki
This retrieves back the value stored with store_initial_timestamp() in the bootblock for southbridge. Change-Id: I377c823706c33ed65af023d20d2e4323edd31199 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3908 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-17am335x: Update the config vars selected by CPU_TI_AM335X.Gabe Black
The way those variables work has changed twice since this file was last changed, and console output was no longer working. Now that they're up to date there's serial output from beaglebone again. Change-Id: I5167fd8c0a8c33438d7f056fdf5951bd054010ed Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3923 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-11CBMEM: Drop parameter from cbmem_reinit()Kyösti Mälkki
Function is always called with get_top_of_ram() - HIGH_MEMORY_SIZE which equals cbmem_base, thus no need to pass it as a parameter. Change-Id: If026cb567ff534716cd9200cdffa08b21ac0c162 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3564 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Backup top_of_ram instead of cbmem_tocKyösti Mälkki
AMD northbridges have a complex way to resolve top_of_ram. Once it is resolved, it is stored in NVRAM to be used on resume. TODO: Redesign these get_top_of_ram() functions from scratch. Change-Id: I3cceb7e9b8b07620dacf138e99f98dc818c65341 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3557 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11AMD AGESA: Place CAR_GLOBAL in BSP stackKyösti Mälkki
Use BSP CPU's stack space to store CAR GLOBALS for the duration of romstage before CAR migration. NOTE: Such globals can only be accessed from BSP CPU due the way AMD platform has memory architecture set up. TODO: Add compile-time assertions to verify CAR configuration matches with the programming in vendorcode. Change-Id: Ica4700433268f484ce69a24d934732f9cfd4ba41 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3832 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-08-23usbdebug: Do not support logging from SMMKyösti Mälkki
Letting SMI handler touch EHCI controller is an excellent source of USB problems. Remove usbdebug entirely from SMM. It may be possible to make usbdebug console work from SMM after hard work and coordination with payloads and even OS drivers. But we are not there. Change-Id: Id50586758ee06e8d76e682dc6f64f756ab5b79f5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3858 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-08-16AMD AGESA: Remove INVD instruction when transitioning from CARBruce Griffith
The AMD AGESA function to move the stack from cache-as-ram to actual RAM doesn't need any help. The current implementation has an INVD instruction just before cache-as-RAM is torn down. It isn't needed for Trinity processors and makes Kabini boot unreliable. Change-Id: Ibe9e4105eee032471ccbb2d537471d5fa5847d22 Signed-off-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3852 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15AMD Kabini: Split DSDT into common sectionsMike Loptien
Split the Family16 (Kabini) DSDT file into logical regions. Olive Hill is the only mainboard and Kabini is the only NB/CPU currently using Family16 AGESA code. Change-Id: I9ef9a7245d14c59f664fc768d0ffa92ef5db7484 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/3821 Tested-by: build bot (Jenkins)
2013-08-07Make EARLY_CONSOLE optionalKyösti Mälkki
This change brings back the possibility to disable console output while in romstage, like before commit d2f45c65. For some platforms (AMD multi-socket) USBDEBUG and/or CBMEM CONSOLE do not work correctly for romstage due the way cache-as-ram is set up, but might already work for ramstage. Change-Id: Id8d830e02a18129af419d3b5860866acf315d531 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3846 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-05AMD Kabini: Add CPU AGESA wrapper for new AMD processor familySiyuan Wang
Change-Id: I4a1d2118aeb2895f3c2acea5e792fbd69c855156 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Mike Loptien <mike.loptien@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3781 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-07-30cpu/intel/model_67x: Add missing includeKyösti Mälkki
The added device.h file was indirectly picked from cpu.h, which will have this include removed in a follow-up patch. Change-Id: Ifc0a4800de3b1ef220ab1034934f583be8c527b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3826 Tested-by: build bot (Jenkins)
2013-07-22X86: make the SIPI num_starts a config variableRonald G. Minnich
The code to figure out how to set num_starts was starting to get kludgy. It's a constant for a given CPU; constants should be constant; make it a config variable. This change includes an example of how to override it. Build but not boot tested; drivers welcome. Change-Id: Iddd906a707bb16251615c7b42f2bfb5a044379b4 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3796 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-07-16AMD Fam15tn: Split DSDT into common sectionsSteve Goodrich
Split the Parmer, Family 15tn, and Hudson DSDT into groups. This splits the DSDT table into includable ASL files which carry details specific to the Family 15tn APU, the Parmer platform, and the Hudson FCH. The dsdt.asl file in the mainboard directory contains only #include references to the appropriate files. Initially, this split was done by moving each piece of functionality into its own file (e.g. IRQ routing and mapping, processor tree, sleep states and sleep methods, etc.) and those pieces were #included in dsdt.asl to ensure an exact match (via acpidump/acpixtract/iasl -d) with the extant version of the table. Once the new tables were found to exactly match the existing tables, the pieces were rearranged into reasonable groups (e.g. fch.asl, northbridge.asl, pci_int.asl, etc.). Some include files have no content but are left as a template for other platforms and as placeholders for completing the ACPI implementation for Parmer (e.g. thermal.asl, superio.asl, ide.asl, sata.asl, etc.). Change-Id: I098b0c5ca27629da9bc1cff1e6ba9fa6703e2710 Signed-off-by: Steve Goodrich <steve.goodrich@se-eng.com> Reviewed-on: http://review.coreboot.org/3629 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-07-15am335x: Make the default media for the bootblock sram instead of NAND flash.Gabe Black
The SOC's built in ROM loads the bootblock and the ROM stage into the on chip memory before handing over control to the bootblock. To avoid having to add one or more driver to the bootblock so that it can re-load the ROM stage from whatever media Coreboot is stored on, we can just take advantage of the copy that's already there. Loading the RAM stage/payloads won't be so simple, so the ROM stage and the RAM stage will have to have different media drivers. Change-Id: Id74ed4bc3afd2063277a36e666080522af2305dd Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3583 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-15am335x: Add the config variable ROMSTAGE_BASE to the CPU's Kconfig.Gabe Black
This variable wasn't being defined and was defaulting to zero when used in the ROM stage's linker script. This change defines it as a variable, and gives it a value which is slightly beyond the end of the bootblock. By making the ROM stage request to be loaded slightly farther into memory than it was loaded by the SOC's masked ROM, we ensure that it's moved away from the stage's metadata instead of on top of it. When it moves the other way, it clobbers important values like the entry point vefore the bootblock has had a chance to use them. Change-Id: I027a1365d05f1d79d7fc1e1349965ccb7d4e81b9 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3582 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-11cpu: Fix spellingMartin Roth
Change-Id: I69c46648de0689e9bed84c7726906024ad65e769 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/3729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-11usbdebug: Drop old includesKyösti Mälkki
Change-Id: I4786bff41fef924c72087c354e394bdc1996cadc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3764 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-11Set PCI bus operations at buildtime for ramstageKyösti Mälkki
PCI bus operations are static through the ramstage, and should be initialized from the very beginning. For all the replaced instances, there is no MMCONF_SUPPORT nor MMCONF_SUPPORT_DEFAULT selected for the northbridge, so these continue to use PCI IO config access. Change-Id: I658abd4a02aa70ad4c9273568eb5560c6e572fb1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3607 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10usbdebug: Put ehci_debug_info in CAR_GLOBALKyösti Mälkki
Store EHCI Debug Port runtime variables in CAR_GLOBAL. For platforms without CAR_MIGRATION, logging on EHCI Debug Port is temporarily lost when CAR is torn down at end of romstage. On model_2065x and model_206ax ehci_debug_info was overlapping the MRC variable region and additionally migration used incorrect size for the structure. Change-Id: I5e6c613b8a4b1dda43d5b69bd437753108760fca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3475 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-07-10i2c: Change the type of the data parameter to uint8_t.Gabe Black
Data is intended to be a byte array, so it should be described by a type which has a fixed size equal to an 8 bit byte. Also, the data passed to write shouldn't be modified and can be const. Change-Id: I6466303d962998f6c37c2d4006a39c2d79a235c1 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3721 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos5420: Remove the extra reopen when reading SPI.Hung-Te Lin
The workaround of re-opening device in exynos_spi_read has been fixed by the new correct open/close and xfer procedure. It's safe to be removed now. Change-Id: I6b1bf717c916903999a137998a578b0a866829bd Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3715 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos5420: Apply new implementation for SPI transmission.Hung-Te Lin
Switch spi_xfer and exynos_spi_read to use the new spi_rx_tx function. Change-Id: I01ab43509df1319672bec30dd111f98001d655d0 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos5420: Add output ability and half-duplex mode in SPI driver.Hung-Te Lin
The SPI driver (exynos_spi_rx_tx) was implemented with only "read" ability and only full-duplex mode. To communicate with devices like ChromeOS EC, we need both output (tx) and half-duplex (searching frame header) features. This commit adds a spi_rx_tx that can handle all cases we need. Change-Id: I6aba3839eb0711d49c143dc0620245c0dfe782d8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3713 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos5420: Revise SPI open/close/reset procedure.Hung-Te Lin
The original Exynos SPI open/close procedure was copied from U-Boot SPL with some assumptions that only works in SPL stage. For example, it tries to always work in 4-byte transmission mode with only RX data is swapped, and claims a packet for initial address command (and with incorrect size). This commit revises open/close and reset so only the required SPI registers are configured. Change-Id: Ieba1f03d80a8949c39a6658218831ded39853744 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3712 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos5420: Provide configuration for SPI0~SPI2.Hung-Te Lin
Fill the SPI device parameters for spi_setup_slave on Exynos 5420. Change-Id: I10b4b9e6cfe46d7bfa34e80e3727c7e7da99ba9d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3711 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos5420: Change SPI module to standard <spi-generic> interface.Hung-Te Lin
The SPI module in Exynos 5420 didn't follow Coreboot's SPI API standard (spi-generic.h) and will be a problem when we want to share SPI drivers. This commit replaces exynos_spi_* by spi_* functions. Note, exynos_spi_read is kept and changed to a static function because its usage is different from the standard API "spi_xfer". Change-Id: I6de301bc6b46a09f87b0336c60247fedbe844ca3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos5420: Clean up unused header and constants in spi.cHung-Te Lin
Remove unused header and constant definition in SPI module. Change-Id: I339e603f48186e4a356e83518b0d0b4c907f11b8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3709 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos5420: Revise SPI device list in cpu.hHung-Te Lin
Add SPI0 and SPI2 to Exynos 5 SPI list, and correct structure names. Also removed the un-enumerated devices (SPI_BASE, base_spi()). Change-Id: Ica6d9a41f9619c8c61eab664d5e988dd4a428e09 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3708 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10arm/exynos: Correct SPI session commands.Hung-Te Lin
Some initialization / shutdown commands should be paired correctly in a SPI I/O session. For example, setting CS should be enabled and disabled in each read; and the bus width (byte or word) should be configured only when opening / closing the SPI device. Change-Id: Ie56b1c3a6df7d542f7ea8f1193ac435987f937ba Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3706 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10AMD: Kconfig cleanupKyösti Mälkki
Change-Id: Ie347b32575c26133d52c275622d29d1cd4c6c0c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3623 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-10exynos5420: i2c: Fix error handling.Gabe Black
The functions which checked the status of a transfer would return success if the bus was no longer occupied, even if it's no longer occupied because the transfer failed. This change modifies those functions to return three possible values, 0 if the transfer isn't done, -1 if there was a fault, and 1 if the transaction completed successfully. Change-Id: Idcc5fdf73cab3c3ece0e96f14113a216db289e05 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3704 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Clock the mmc blocks off of the mpll.Gabe Black
The exynos manual suggests hooking the mmc ip blocks to the mpll. They had been set to use a different pll. This changes them over and modifies the divider so that the frequency stays the same. Change-Id: I85103388d6cc2c63d1ca004654fc08fcc8929962 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3703 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: use speed parameter in i2c_init() for HSI2CDavid Hendricks
This allows us to set different speeds for each HSI2C bus. Change-Id: I50cc257aad9ef50025d0837b0516940b956efc02 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3701 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Change some clock settings.Gabe Black
This change adjusts some clock settings so that they match U-Boot. There are three different changes. 1. Change the source for psgen from the oscillator clock to the pclk. 2. Change the pll feeding the SPI busses from epll to mpll, as suggested in the manual. 3. Change the SPI prescaller. Change-Id: Ib54a255bc14fc286629dac86db9b8cf8e75a610b Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3700 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Fix the way the rate of the input clock for i2c buses is found.Gabe Black
The clock divider was being read from registers incorrectly which meant that the periph rate was wrong. Change-Id: I50efb62849ef29bdfb0efc56c49642d3edca094c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3699 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10snow: Add flush to UART driver.Hung-Te Lin
Wait for UART FIFO to be ready. (Credit to dhendrix for finding the bits to test with.) Change-Id: Ib6733e422cbc1c61b942bd90d85f88a3f412d6ff Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3698 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Exynos5420: Initialize USB PHYStefan Reinauer
... this is needed for libpayload to talk to USB devices. (forward ported from https://gerrit.chromium.org/gerrit/#/c/55554) Change-Id: I5a20864689efd0c0149775e6d85b658e0cc6715c Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3697 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Exynos5250: Initialize USB PHYStefan Reinauer
... this is needed for libpayload to talk to USB devices. Change-Id: I7eb19003c9e96efb5fa7a3f97c7b15f3ef332687 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3696 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Exynos: Only compile UART in if serial console is selectedStefan Reinauer
Change-Id: I5cddffc2e524aae7a31a8f94f67e03a5b7e15c82 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3695 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Exynos5420: add code to make sure resume will work on DRAM.Ronald G. Minnich
Found during a perusal of u-boot changes. It looks important. For more info: http://git.chromium.org/gitweb/?p=chromiumos/third_party/u-boot.git;a=commit;h=56eab63922d2b2380518238ae03e8d69e99af4fe Change-Id: Ida2fe2a98be008a4bdfe594cf00d01a33b511b4f Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3693 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Simplify early / bootblock console codeStefan Reinauer
Change-Id: I6b28bb95c7decbe3eed33b5b5a029bee48bbe403 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Switch to fixed size types in dmc.h.Gabe Black
The members data structures in dmc.h are intended to have a particular size. Rather than assume that particular types are the right size, we should use types that are guaranteed to be the right size. Also, since the registers are at particular offsets as well, the structures should be packed. Change-Id: I9cc11d7451f92ba3eb85c6be88ecbc62c7a5652d Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3685 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Revamp the high speed I2C driver.Gabe Black
The previous driver was a bit awkward and not entirely correct. This change primarily replaces the read/write functions with simpler and more robust (hopefully) version. Change-Id: I55f0ad8faec2de520e27577bd6dad9c0118d8171 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3684 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Samsung CPUs: Unify KconfigStefan Reinauer
For all other CPUs, we unconditionally include the CPU Kconfig files in the CPU directory, not in the vendor directory. Do the same thing for the Exynos CPUs. This allows us to make CPU dependent changes in the directory of that CPU alone. Also, drop some unused Kconfig variables from the Exynos Kconfig files. Change-Id: I4e4c22a0693988834e619dd33d121bf994ed57e8 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3683 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: update I2C code, add HSI2C/USI supportDavid Hendricks
This updates the low-level I2C code to handle the new high-speed HSI2C/USI inteface. It also outputs a bit more error information when things go wrong. Also adds some more error prints. Timeouts really need to be noted. In hsi2c_wait_for_irq, order the delay so that we do an initial sleep first to avoid an early-test that was kicking us out of the test too soon. We got to the test before the hardware was ready for us. Finally, test clearing the interrupt status register every time we wait for it on the write. Works. Change-Id: I69500eedad58ae0c6405164fbeee89b6a4c6ec6c Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3681 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: when setting a GPIO to put, set the value, then the directionRonald G. Minnich
We saw a problem on x86 last year in which setting direction, then value, glitched the output and caused problems. Change this code to set the output, then the direction. Change-Id: I3e1e17ffe82ae270eea539530368a58c6cfe0ebe Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3679 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynox5420: Remove the 5250 clock registers and fix the SPI frequency.Gabe Black
The 5420 clock code still had a data structure in it for the 5250 clock registers which was used by some of the clock functions. That caused some clocks to be configured incorrectly, specifically the i2c clock which was running at about 80KHz instead of about 600KHz as configured by U-Boot. Also, the registers and bit positions used to set up the SPI bus were not consistent with U-Boot, and if the bus clock rate were set to 50MHz, a rate which has historically worked on snow, loading would fail. With these fixes the clock rate can be set to 50MHz and the device boots as much as is expected. I haven't yet measured the actual frequency of the bus to verify that it's now being calculated correctly. Change-Id: Id53448fcb6d186bddb3f889c84ba267135dfbc00 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3678 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10PIT: memory setupRonald G. Minnich
Tested and working. Gets us to ramstage. Change-Id: Ib9ea4a6c912e8152246aaf4f1f084a4aa1626053 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3677 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: add I2C8-10 to clock_get_periph_rate()David Hendricks
This adds entries for I2C8-10 to giant switch statement in clock_get_periph_rate(). It also eliminates the I2C peripheral's usage of clk_bit_info since it's confusing and error-prone. Change-Id: I30dfc4c9a03fbf16d08e44e074189fb9021edb6d Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Implement support for the pinmux as functions.Gabe Black
Change-Id: I5e0ec360597cd95cb6510fb32b04d8931e6a33db Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3674 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5250: De-switch-ify the pinmux configuration code.Gabe Black
The pinmux code for the exynos5250 was all bundled into a single, large function which contained a switch statement that would set up the pins for different peripherals within the SOC. There was also a "flags" parameter, the meaning of which, if any, depended on which peripheral was being set up. There are several problems with that approach. First, the code is inefficient in both time and space. The caller knows which peripheral it wants to set up, but that information is encoded in a constant which has to be unpacked within the function before any action can be taken. If there were a function per peripheral, that information would be implicit. Also, the compiler and linker are forced to include the entire function with all its cases even if most of them are never called. If each peripheral was a function, the unused ones could be garbage collected. Second, it would be possible to try to set up a peripheral which that function doesn't know about, so there has to be additional error checking/handling. If each peripheral had a function, the fact that there was a function to call at all would imply that the call would be understood. Third, the flags parameter is fairly opaque, usually doesn't do anything, and sometimes has to have multiple values embedded in it. By having separate functions, you can have only the parameters you actually want, give them names that make sense, and pass in values directly. Fourth, having one giant function pretends to be a generic, portable API, but in reality, the only way it's useful is to call it with constants which are specific to a particular implementation of that API. It's highly unlikely that a bit of code will need to set up a peripheral but have no idea what that peripheral actually is. Call sights for the prior pinmux API have been updated. Also, pinmux initialization within the i2c driver was moved to be in the board setup code where it really probably belongs. The function block that implements the I2C controller may be shared between multiple SOCs (and in fact is), and those SOCs may have different pinmuxes (which they do). Other places this same sort of change can be made are the pinmux code for the 5420, and the clock configuration code for both the 5250 and the 5420. Change-Id: Ie9133a895e0dd861cb06a6d5f995b8770b6dc8cf Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3673 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARM: Separate the early console (romstage) from the bootblock console.Gabe Black
It might be that you want an early console in romstage before RAM is up, but you can't or don't want to support the console all the way back in the bootblock. By making the console in those two different environments configurable seperately that becomes possible. On the 5250 console output as early as the bootblock works, but on the 5420 it only starts working in the ROM stage after clocks have been initialized. Change-Id: I68ae3fcb4d828fa8a328a30001c23c81a4423bb8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3671 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Clear the framebuffer before making it uncacheableStefan Reinauer
If we clear the framebuffer and then flush it back to memory using cache operations, the writes are going to be full cachelines at a time. If we make it uncacheable first, the writes will be serialized writes of whatever sized chunks memset uses, probably 4 bytes or less. Change-Id: I960f87a370e97f9e91236ad796d931573bb3dbb8 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3668 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Don't disable and re-enable the MMU when uncaching the framebufferStefan Reinauer
At one time it seemed to be necessary to disable and then re-enable the MMU when setting the framebuffer to be uncache-able due to bugs in the MMU management code. Since those bugs have been fixed, this is no longer necessary. Change-Id: I7ce825cf5eaaa95119364d780cba0935752e4632 Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/3667 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Simplify the graphics code by eliminating the unused color mapStefan Reinauer
The code that allocated space for the framebuffer was adding space for a vestigial color map which was never used. It was also passing around a structure which was used to calculate a single value which was already known when that structure was put together. Eliminate the extra space, and pass the single value instead of the structure. Change-Id: I29bc17488539dbe695908e47f0b80c07e102e17d Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/3666 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Fix some problems with the clock management code.Gabe Black
The code which figured out the rate of the input clock to a peripheral was doing several things wrong. First, it was using the wrong values when determing what the source of a clock was set to. Second, it was using the wrong offset into that register to find the current source setting. This change fixes the constants which select a clock source which get some more things working, but doesn't attempt to fix the bit position table. Change-Id: Id7482ee1c78cec274353bae3ce2dccb84705c66a Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3665 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7: Reserve space BL1 and checksum header by specifying bootblock offset.Hung-Te Lin
Not all ARM systems need "BL1", and the layout of BL* and bootblock may be different (ex, Exynos 5250 may use a new BL1 with variable length checksum header). To support that better, define the real base address (and ROM offset) of boot block, and then we can post-processing ROM image file by filling data / checksum and any other information. Change-Id: I0e3105e52500b6b457371ad33a9aa546acf28928 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3664 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10cpu: Add CPU microcode file to cbfs with 16-byte alignmentAaron Durbin
On x86 there is a 16-byte alignment requirement for the addresses containing the CPU microcode. The cbfs files containing the microcode are used in memory-mapped fashion when loading new mircocode. Therefore, the data payload's address/offset of a cbfs file in flash dictates the resulting alignment. Fix this by processing the CPU microcode cbfs file separately as it uses $(CBFSTOOL) to find the proper location within the provided rom image. Change-Id: Ia200d62dbcf7ff1fa59598654718a0b7e178ca4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ec: Add romstage function for checking and rebooting ECDuncan Laurie
Now that we are executing VbInit() in coreboot we can end up in a situation where the recovery reason is consumed during VbInit (end of romstage) and then the EC is rebooted to RO during ramstage EC init, thereby losing the recovery reason. Two possiblities are to remove the EC check+reboot from ramstage and let it happen in depthcharge. This however means that the system has to boot all the way into depthcharge and then reboot the EC and the system again. Instead if we do a check in romstage before VbInit() is called then we can reboot the EC into RO early and avoid booting all the way to depthcharge first. This change adds a ramstage version the EC init function and calls it from the shared romstage code immediately after the PCH decode windows are setup. Change-Id: I30d2a0c7131b8e4ec30c63eea36944ec111a8fba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/3744 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Replace the 5250 clock logic with 5420.Gabe Black
The new code is stolen from U-Boot with little or no understanding of how it works. Change-Id: I3de7d25174072f6068d9d4fdaa308c0462296737 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3658 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Make the ps_hold_setup function public.Gabe Black
This function had been declared in a public header file, but was marked static when actually defined. Change-Id: Ia551a5a12e7dbaf7bc00861e085695145ab7b91a Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3657 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Exynos5420: Clean up console codeStefan Reinauer
- Don't initialize console twice in the bootblock - remove printk in memory init that would mess up the UART - unconditionally run console_init() in romstage, as it is also unconditionally run in the bootblock. Change-Id: I983d011c6ca602445f447d17799c1b2a33e8bd1d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3656 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5250: Clear the framebuffer before making it uncacheable.Gabe Black
If we clear the framebuffer and then flush it back to memory using cache operations, the writes are going to be full cachelines at a time. If we make it uncacheable first, the writes will be serialized writes of whatever sized chunks memset uses, probably 4 bytes or less. Change-Id: I1b81731cfed00ae091ba6357451ab186d16f559e Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3655 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5250: Don't disable and re-enable the MMU when uncaching the framebuffer.Gabe Black
At one time it seemed to be necessary to disable and then re-enable the MMU when setting the framebuffer to be uncache-able due to bugs in the MMU management code. Since those bugs have been fixed, this is no longer necessary. Change-Id: I5f7b9bd14dc9929efe1834ec9a258d388b8c94e9 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3654 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5250: Simplify the graphics code by eliminating the unused color map.Gabe Black
The code that allocated space for the framebuffer was adding space for a vestigial color map which was never used. It was also passing around a structure which was used to calculate a single value which was already known when that structure was put together. Eliminate the extra space, and pass the single value instead of the structure. Change-Id: Ia6a41cefdf8b29fe7d68f9596a156eced6eb5df8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3652 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5250: When enabling the I2S pins, turn off pull ups/downs.Gabe Black
These pins will be driven by the internal controller which shouldn't have pull ups or downs in the pin fighting with them. Change-Id: I579aed84ace45d8f5f1d3ca64c064d98de842b57 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3649 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Replace the 5250 GPIO code with code that should work on 5420.Gabe Black
Change-Id: Iac6615240e94c74037afc801169c32d3ebc4ac03 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3648 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: Clean up console codeStefan Reinauer
- Guard console_init() with CONFIG_EARLY_CONSOLE in bootblock - Don't initialize console twice in the bootblock - remove printk in memory init that would mess up the UART - unconditionally run console_init() in romstage, as it is also unconditionally run in the bootblock. Change-Id: I8f0d60877433162367074d0e55e01f935fd81f8e Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3647 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Fix some settings for the exynos5420 CPU.Gabe Black
Some of the settings which were defaulted to or automatically selected for the exynos5420 which were inherited from the exynos5250 were not correct for this SOC. Change-Id: I11ffd8a6b80628405ac493fe2139f79c05d15d7e Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3645 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Create an exynos5420 directory which is nearly a copy of exynos5250.Gabe Black
This change creates an exynos5420 directory with code that will eventually implement support for the exynos5420 cpu from Samsung. Currently it's a copy of the exynos5250 directory with the name changed. There are going to be some problems where headers in src/cpu/samsung/exynos-common include headers in the exynos5250 directory directly. Change-Id: Ia8d7244310d32499238bbc171c0c668ec48178e1 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3644 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: De-uboot-ify Exynos5250 GPIO codeStefan Reinauer
The Exynos GPIO code has three different APIs that, unfortunately, were widely used throughout the code base. This patch is cleaning up the mess. Change-Id: I09ccc7819fb892dbace9693c786dacc62f3f8eac Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3643 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: De-uboot-ify Exynos5250 codeStefan Reinauer
When starting the Exynos5250 port, a lot of unneeded u-boot code was imported. This is an attempt to get rid of a lot of unneeded code before the port is used as a basis for further ARM ports. There is a lot more that can be done, including cleaning up the 5250's Kconfig file. Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3642 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Update 3rdparty hash for latest ARM BL1 binariesStefan Reinauer
Change-Id: Ice28114e5f53f510d305cd85d095044e2f4bd7b2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3740 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-31 04:01:40 +0000