summaryrefslogtreecommitdiff
path: root/src/cpu/ti/am335x
AgeCommit message (Collapse)Author
2013-06-17am335x: Add pinmux support based on the functions in U-BootGabe Black
I was unable to find documentation that said what mode numbers correspond to what functionality, so I translated over what U-Boot does. Change-Id: I34fab0f024fa2322d6bb66106aed75224e67354d Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3489 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-12am335x: Add struct `am335x_uart` for uart registersDavid Hendricks
Add a struct for referencing UART registers. The layout is quite strange on this chip, as the entire register space can take on three different meanings depending on the line control settings (in the LCR register) And to make things more confusing, some offsets reference different registers depending on if a read or a write operation is used. Change-Id: Ie62af9c0e0edafd01b81686a0fe5c5c1d4fa06c4 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3319 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-11am335x: Revert how the header load size is calculated to an earlier method.Gabe Black
The current method will treat hex values as 0 and would calculate the wrong size. This change switches back to an earlier method which used shell syntax to add the offset and size. Change-Id: I9fb2d9b323f113cc56a5ad2e38b47d2d22084f08 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3432 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-11am335x: Make the iROM load only the bootblock and ROM stage.Gabe Black
The bootblock and ROM stages are the only ones that are really required to be loaded in the quite limited on chip RAM during startup. Rather than load the whole image which requires everything to be small, load just the bootblock and the ROM stage, allowing the rest of the image to be arbitrarily large. Loading a minimal amount of stuff should also improve boot performance a little bit. Change-Id: I2fede63b8d3d8f0d880e4a692ae423021f8232b6 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3421 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10am335x: Build an omap style header and an image with it at the front.Gabe Black
Loading on an OMAP SOC requires that the first sector of the image have a configuration header, and, when not an execute in place image, an additional header which describes how big the image is and where it should be loaded. This change adds some infrastructure to statically build that header using C code, and to paste the header onto the front of coreboot.rom in a new top level target file called MLO. The configuration header we're using is as inert as possible, in line with what U-Boot is doing. I think it could be used to give additional configuration parameters to the built-in ROM on the SOC, but we don't need to do that, and there didn't seem to be any actual documentation how to do that. Because the header is built from C and is defined per CPU, it would be possible to include extra settings in other CPUs if desired. Adding a new top level build target is a bit disruptive, but should be contained to the am335x directory and not interfere with other mainboards. Change-Id: I06d346a4050c20963b3c7c6e8a152070bf2d145a Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3332 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-03am335x: Clean up/fix some settings in the am335x Kconfig.Gabe Black
Some settings in the am335x Kconfig weren't actually used for anything, some where place holders, and some where left over from another CPU. The memory addresses are in the internal RAM in the SOC as described in the reference manual. The stack is put where the internal ROM had its stack, and the bootblock is put at the bottom of that region as the manual suggests. The ROM stage offset is set to 10K which is a bit bigger than the ~7.5K the bootblock currently takes up. Change-Id: I1a117d789a791d7e3db1118823f8216b3361433c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3327 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-26beaglebone: initial Kconfig and MakefilesGabe Black
Initial structure of Beaglebone port Change-Id: Ia255ab207f424dcd525990cdc0d74953e012c087 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3279 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>