| Age | Commit message (Collapse) | Author |
|---|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ie32f1d43168c277be46cdbd7fbfa2445d9899689
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31699
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the new, faster architectural register accessors to
libpayload that were already added to coreboot in CB:27881. It also
hardcodes the assumption that coreboot payloads run at EL2, which has
already been hardcoded in coreboot with CB:27880 (see rationale there).
This means we can drop all the read_current/write_current stuff which
added a lot of unnecessary helpers to check the current exception level.
This patch breaks payloads that used read_current/write_current
accessors, but it seems unlikely that many payloads deal with this stuff
anyway, and it should be a trivial fix (just replace them with the
respective _el2 versions).
Also add accessors for a couple of more registers that are required to
enable debug mode while I'm here.
Change-Id: Ic9dfa48411f3805747613f03611f8a134a51cc46
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/29017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Accesses to architectural registers should be really fast -- they're
just registers, after all. In fact, the arm64 architecture uses them for
some timing-senstive uses like the architectural timer. A read should be:
one instruction, no data dependencies, done.
However, our current coreboot framework wraps each of these accesses
into a separate function. Suddenly you have to spill registers on a
stack, make a function call, move your stack pointer, etc. When running
without MMU this adds a significant enough delay to cause timing
problems when bitbanging a UART on SDM845.
This patch replaces all those existing functions with static inline
definitions in the header so they will get reduced to a single
instruction as they should be. Also use some macros to condense the code
a little since they're all so regular, which should make it easier to
add more in the future. This patch also expands all the data types to
uint64_t since that's what the actual assembly instruction accesses,
even if the register itself only has 32 bits (the others will be ignored
by the processor and set to 0 on read). Arm regularly expands registers
as they add new bit fields to them with newer iterations of the
architecture anyway, so this just prepares us for the inevitable.
Change-Id: I2c41cc3ce49ee26bf12cd34e3d0509d8e61ffc63
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When we first created the arm64 port, we weren't quite sure whether
coreboot would always run in EL3 on all platforms. The AArch64 A.R.M.
technically considers this exception level optional, but in practice all
SoCs seem to support it. We have since accumulated a lot of code that
already hardcodes an implicit or explicit assumption of executing in EL3
somewhere, so coreboot wouldn't work on a system that tries to enter it
in EL1/2 right now anyway.
However, some of our low level support libraries (in particular those
for accessing architectural registers) still have provisions for
running at different exception levels built-in, and often use switch
statements over the current exception level to decide which register to
access. This includes an unnecessarily large amount of code for what
should be single-instruction operations and precludes further
optimization via inlining.
This patch removes any remaining code that dynamically depends on the
current exception level and makes the assumption that coreboot executes
at EL3 official. If this ever needs to change for a future platform, it
would probably be cleaner to set the expected exception level in a
Kconfig rather than always probing it at runtime.
Change-Id: I1a9fb9b4227bd15a013080d1c7eabd48515fdb67
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I24d219b4ce6033f64886e22973ca8716113d319f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
cache_sync_instructions() has been superseded by
arch_program_segment_loaded() and friends for a while. There are no uses
in common code anymore, so let's remove it from <arch/cache.h> for all
architectures.
arm64 still has an implementation and one reference, but they are not
really needed since arch_program_segment_loaded() does the same thing
already. Remove them.
Leave it in arm(32) since there are several references (including in SoC
code) that I don't feel like tracking down and testing right now.
Change-Id: I6b776ad49782d981d6f1ef0a0e013812cf408524
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I3873cc8ff82cb043e4867a6fe8c1f253ab18714a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Disabling the MMU with proper cache behavior is a bit tricky on ARM64:
you can flush the cache first and then disable the MMU (like we have
been doing), but then you run the risk of having new cache lines
allocated in the tiny window between the two, which may or may not
become a problem when those get flushed at a later point (on some
platforms certain memory regions "go away" at certain points in a way
that makes the CPU very unhappy if it ever issues a write cycle to
them again afterwards).
The obvious alternative is to first disable the MMU and then flush the
cache, ensuring that every memory access after the flush already has the
non-cacheable attribute. But we can't just flip the order around in the
C code that we have because then those accesses in the tiny window
in-between will go straight to memory, so loads may yield the wrong
result or stores may get overwritten again by the later cache flush.
In the end, this all shouldn't really be a problem because we can do
both operations purely from registers without doing any explicit memory
accesses in-between. We just have to reimplement the function in
assembly to make sure the compiler doesn't insert any stack accesses at
the wrong points.
Change-Id: Ic552960c91400dadae6f130b2521a696eeb4c0b1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27238
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some arm64 files that were imported from other projects use the
__ASSEMBLY__ macro to test whether a header is included from a C or an
assembly file. This patch switches them to the coreboot standard
__ASSEMBLER__, which has the advantage of being a GCC builtin so that
the including file doesn't have to supply it explicitly.
Change-Id: I1023f72dd13857b14ce060388e97c658e748928f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/27237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I44cdb6578f9560cf4b8b52a4958b95b65e0cd57a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
SoC sdm845 uses ARCH Timer
Change-Id: I45e2d4d2c16a2cded3df20d393d2b8820050ac80
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
New API required by sdm845 DDR init/training protocol
TEST=build & run
Change-Id: I8442442c0588dd6fb5e461b399e48a761f7bbf29
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The VA space needs to be extended to support 48bit, as on Cavium SoCs
the MMIO starts at 1 << 47.
The following changes were done to coreboot and libpayload:
* Use page table lvl 0
* Increase VA bits to 48
* Enable 256TB in MMU controller
* Add additional asserts
Tested on Cavium SoC and two ARM64 Chromebooks.
Change-Id: I89e6a4809b6b725c3945bad7fce82b0dfee7c262
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/24970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I89cf4b996405af616f54cf2d9fabd4e258352b03
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/23036
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot and libpayload currently use completely different code to
perform a full cache flush on ARM64, with even different function names.
The libpayload code is closely inspired by the ARM32 version, so for the
sake of overall consistency let's sync coreboot to that. Also align a
few other cache management details to work the same way as the
corresponding ARM32 parts (such as only flushing but not invalidating
the data cache after loading a new stage, which may have a small
performance benefit).
Change-Id: I9e05b425eeeaa27a447b37f98c0928fed3f74340
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We have kconfig.h auto-included and it pulls config.h too.
Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17655
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
On ARM64, the memory type for accessing page table descriptors during
address translation is governed by the Translation Control Register
(TCR). When the MMU code accesses the same descriptors to change page
mappings, it uses the standard memory type rules (defined by the page
table descriptor for the page that contains that table, or 'device' if
the MMU is off).
Accessing the same memory with different memory types can lead to all
kinds of fun and hard to debug effects. In particular, if the TCR says
"cacheable" and the page tables say "uncacheable", page table walks will
pull stale entries into the cache and later mmu_config_range() calls
will write directly to memory, bypassing those cache lines. This means
the translations will not get updated even after a TLB flush, and later
cache flushes/evictions may write the stale entries back to memory.
Since page table configuration is currently always done from SoC code,
we can't generally ensure that the TTB is always mapped as cacheable.
We can however save developers of future SoCs a lot of headaches and
time by spot checking the attributes when the MMU gets enabled, as this
patch does.
BRANCH=None
BUG=None
TEST=Booted Oak. Manually tested get_pte() with a few addresses.
Change-Id: I3afd29dece848c4b5f759ce2f00ca2b7433374da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f3947f4bb0abf4466006d5e3a962bbcb8919b12d
Original-Change-Id: I1008883e5ed4cc37d30cae5777a60287d3d01af0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323862
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13595
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
For the coreboot license header, we want to use two paragraphs.
See the section 'Common License Header' in the coreboot wiki
for more details.
Change-Id: I4a43f3573364a17b5d7f63b1f83b8ae424981b18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13118
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This just updates existing guard name comments on the header files
to match the actual #define name.
As a side effect, if there was no newline at the end of these files,
one was added.
Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes the old arm64/stage_entry.S code that was too
specific to the Tegra SoC boot flow, and replaces it with code that
hides the peculiarities of switching to a different CPU/arch in ramstage
in the Tegra SoC directories.
BRANCH=None
BUG=None
TEST=Built Ryu and Smaug. !!!UNTESTED!!!
Change-Id: Ib3a0448b30ac9c7132581464573efd5e86e03698
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12078
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch expands the existing ENV_<stage> macros in <rules.h> with a
set of ENV_<arch> macros which can be used to detect which architecture
the current compilation unit is built for. These are more consistent
than compiler-defined macros (like '#ifdef __arm__') and will make it
easier to write small, architecture-dependent differences in common code
(where we currently often use IS_ENABLED(CONFIG_ARCH_...), which is
technically incorrect in a world where every stage can run on a
different architecture, and merely kinda happened to work out for now).
Also remove a vestigal <arch/rules.h> from ARM64 which was no longer
used, and genericise ARM subarchitecture Makefiles a little to make
things like __COREBOOT_ARM_ARCH__ available from all file types
(including .ld).
BUG=None
TEST=Compiled Falco, Blaze, Jerry and Smaug.
Change-Id: Id51aeb290b5c215c653e42a51919d0838e28621f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12433
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The existing arm64 architecture code has been developed for the Tegra132
and Tegra210 SoCs, which only start their ARM64 cores in ramstage. It
interweaves the stage entry point with code that initializes a CPU (and
should not be run again if that CPU already ran a previous stage). It
also still contains some vestiges of SMP/secmon support (such as setting
up stacks in the BSS instead of using the stage-peristent one from
memlayout).
This patch splits those functions apart and makes the code layout
similar to how things work on ARM32. The default stage_entry() symbol is
a no-op wrapper that just calls main() for the current stage, for the
normal case where a stage ran on the same core as the last one. It can
be overridden by SoC code to support special cases like Tegra.
The CPU initialization code is split out into armv8/cpu.S (similar to
what arm_init_caches() does for ARM32) and called by the default
bootblock entry code. SoCs where a CPU starts up in a later stage can
call the same code from a stage_entry() override instead.
The Tegra132 and Tegra210 code is not touched by this patch to make it
easier to review and validate. A follow-up patch will bring those SoCs
in line with the model.
BRANCH=None
BUG=None
TEST=Booted Oak with a single mmu_init()/mmu_enable(). Built Ryu and
Smaug.
Change-Id: I28302a6ace47e8ab7a736e089f64922cef1a2f93
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12077
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In order to have a proper runtime-modifyable page table API (e.g. to
remap DRAM after it was intialized), we need to remove any external
bookkeeping kept in global variables (which do not persist across
stages) from the MMU code. This patch implements this in a similar way
as it has recently been done for ARM32 (marking free table slots with a
special sentinel value in the first PTE that cannot occur as part of a
normal page table).
Since this requires the page table buffer to be known at compile-time,
we have to remove the option of passing it to mmu_init() at runtime
(which I already kinda deprecated before). The existing Tegra chipsets
that still used it are switched to instead define it in memlayout in a
minimally invasive change. This might not be the best way to design this
overall (I think we should probably just throw the tables into SRAM like
on all other platforms), but I don't have a Tegra system to test so I'd
rather keep this change low impact and leave the major redesign for
later.
Also inlined some single-use one-liner functions in mmu.c that I felt
confused things more than they cleared up, and fixed an (apparently
harmless?) issue with forgetting to mask out the XN page attribute bit
when casting a table descriptor to a pointer.
BRANCH=None
BUG=None
TEST=Compiled Ryu and Smaug. Booted Oak.
Change-Id: Iad71f97f5ec4b1fc981dbc8ff1dc88d96c8ee55a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since, SMP support is removed for ARM64, there is no need for CPU
initialization to be performed via device-tree.
Change-Id: I0534e6a93c7dc8659859eac926d17432d10243aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11913
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
As ARM Trusted Firmware is the only first class citizen for
booting arm64 multi-processor in coreboot remove SMP
support. If SoCs want to bring up MP then ATF needs to be
ported and integrated.
Change-Id: Ife24d53eed9b7a5a5d8c69a64d7a20a55a4163db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/11909
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With the removal of secmon from coreboot there are no
power down operations required. As such remove the
A57 power down support.
Change-Id: I8eebb0ecd87b5e8bb3eaac335d652689d7f57796
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11898
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's been decided to only support ARM Trusted Firmware for
any EL3 monitor. That means any SoC that requires PSCI
needs to add its support for ATF otherwise multi-processor
bring up won't work.
Change-Id: Ic931dbf5eff8765f4964374910123a197148f0ff
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11897
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Set XN bit of block upper attribute to device memory in mmu. CPU may
speculatively prefetch instructions from device memory, but the IO
subsystem of some implementation may not support this operation. Set
this attribute to device memory mmu entries can prevent CPU from
prefetching device memory.
BRANCH=none
BUG=none
TEST=build and booted to kernel on oak-rev3 with dcm enabled.
Change-Id: I52ac7d7c84220624aaf6a48d64b9110d7afeb293
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7b01a4157cb046a5e75ea7625060a602e7a63c3c
Original-Change-Id: Id535e990a23b6c89123b5a4e64d7ed21eebed607
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302301
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current arm64 MMU interface is difficult to use in pre-RAM
environments. It is based on the memranges API which makes use of
malloc(), and early stages usually don't have a heap. It is also built
as a one-shot interface that requires all memory ranges to be laid out
beforehand, which is a problem when existing areas need to change (e.g.
after initializing DRAM).
The long-term goal of this patch is to completely switch to a
configure-as-you-go interface based on the mmu_config_range() function,
similar to what ARM32 does. As a first step this feature is added
side-by-side to the existing interface so that existing SoC
implementations continue to work and can be slowly ported over one by
one. Like the ARM32 version it does not garbage collect page tables that
become unused, so repeated mapping at different granularities will
exhaust the available table space (this is presumed to be a reasonable
limitation for a firmware environment and keeps the code much simpler).
Also do some cleanup, align comments between coreboot and libpayload for
easier diffing, and change all error cases to assert()s. Right now the
code just propagates error codes up the stack until it eventually
reaches a function that doesn't check them anymore. MMU configuration
errors (essentially just misaligned requests and running out of table
space) should always be compile-time programming errors, so failing hard
and fast seems like the best way to deal with them.
BRANCH=None
BUG=None
TEST=Compile-tested rush_ryu. Booted on Oak and hacked MMU init to use
mmu_config_range() insted of memranges. Confirmed that CRCs over all page
tables before and after the change are equal.
Change-Id: I93585b44a277c1d96d31ee9c3dd2522b5e10085b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f10fcba107aba1f3ea239471cb5a4f9239809539
Original-Change-Id: I6a2a11e3b94e6ae9e1553871f0cccd3b556b3e65
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/271991
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10304
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
The configuration of SPSR bits that mask processor exceptions is kinda
oddly hidden as an implict part of the transition() function right now.
It would be odd but not impossible for programs to want to be entered
with enabled exceptions, so let's move these bits to be explicitly set
by the caller like the rest of SPSR instead.
Also clear up some macro names. The SPSR[I] bit is currently defined as
SPSR_IRQ_ENABLE, which is particularly unfortunate since that bit
actually *disables* (masks) interrupts. The fact that there is an
additional SPSR_IRQ_MASK definition with the same value but a different
purpose doesn't really help. There's rarely a point to have all three of
xxx_SHIFT, xxx_MASK and xxx_VALUE macros for single-bit fields, so
simplify this to a single definition per bit. (Other macros in
lib_helpers.h should probably also be overhauled to conform, but I want
to wait and see how many of them really stay relevant after upcoming
changes first.)
BRANCH=None
BUG=None
TEST=None
Change-Id: Id126f70d365467e43b7f493c341542247e5026d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 715600c83aef9794d1674e8c3b62469bdc57f297
Original-Change-Id: I3edc4ee276feb8610a636ec7b4175706505d58bd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270785
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10250
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The secure monitor entry is now guarded by an explicit if
statement for its Kconfig rather than hiding than in the corresponding
header file. This makes it clear that there are two (soon three)
separate code paths here. Similar change for the optional spintable
feature in the "legacy" payload entry path.
[pg: split out from the patch linked below]
Change-Id: Ia1554959b3268b718a9606e2f79d8f22f336c94d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10248
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
1. change mmu granule size from 64KB to 4KB
2. correct level 1 translation table creation logic
3. automatically calculate granule size related macros
BRANCH=none
BUG=none
TEST=boot to kernel on oak board
Change-Id: I9e99a3017033f6870b1735ac8faabb267c7be0a4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2f18c4d5d9902f2830db82720c5543af270a7e3c
Original-Change-Id: Ia27a414ab7578d70b00c36f9c063983397ba7927
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265603
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/10009
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
CPTR_EL3 and CPACR_EL1 are the registers for controlling the trap level
and access right of the FPU/SIMD instructions. Need to save/restore them
in every power cycle to keep the settings consistent.
BRANCH=none
BUG=none
TEST=boot on smaug/foster, verify the cpu_on/off is ok as well
Change-Id: I96fc0e0d2620e72b6ae2ffe4d073c9328047dc01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 73e8cc8f25922e7bc218d24fbf4f7c67e15e3057
Original-Change-Id: I51eed07b1bb8f6eb2715622ec5d5c3f80c3c8bdd
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/266073
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-on: http://review.coreboot.org/9981
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Implement the individual core powerdown sequence as per
Cortex-A57/A53/A72 TRM.
Based-on-the-work-by:
Varun Wadekar <vwadekar@nvidia.com>
BRANCH=none
BUG=none
TEST=boot on smaug/foster, verify the cpu_on/off is ok as well
Change-Id: I4719fcbe86b35f9b448d274e1732da5fc75346b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b6bdcc12150820dfad28cef3af3d8220847c5d74
Original-Change-Id: I65abab8cda55cfe7a0c424f3175677ed5e3c2a1c
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265827
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9980
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This patchs introduces level specific data cache maintenance operations
to cache_helpers.S. It's derived form ARM trusted firmware repository.
Please reference here.
https://github.com/ARM-software/arm-trusted-firmware/blob/master/
lib/aarch64/cache_helpers.S
BRANCH=none
BUG=none
TEST=boot on smaug/foster
Change-Id: Ib58a6d6f95eb51ce5d80749ff51d9d389b0d1343
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b3d1a16bd0089740f1f2257146c771783beece82
Original-Change-Id: Ifcd1dbcd868331107d0d47af73545a3a159fdff6
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265826
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9979
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
CNTFRQ_EL0 can only be set in highest implemented exception level.
Save and restore CNTFRQ_EL0 for secondary cpus in coreboot.
This patch fix the error below:
SANITY CHECK: Unexpected variation in cntfrq. Boot CPU:
0x00000000c65d40, CPU1: 0x00000000000000
BRANCH=none
BUG=none
TEST=boot to kernel on oak board and check secondary cpu's cntfrq.
confirmed cpu1's cntfrq is same as boot cpu's.
Change-Id: I9fbc3c82c2544f0b59ec34b1d631dadf4b9d40eb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b47e4e649efc7f79f016522c7d8a240f98225598
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Change-Id: I2d71b0ccfe42e8a30cd1367d10b0f8993431ef8c
Original-Reviewed-on: https://chromium-review.googlesource.com/264914
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9921
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add arm64_arch_timer_init function which should be called per CPU for
setting up the cntfrq register of arch timer. During the Linux kernel
bring up time, it will check the cntfrq register per CPU and should be
the same with the boot CPU.
BRANCH=none
BUG=none
TEST=bring up 4 cores in Linux kernel without warning message of cntfrq
register value
Change-Id: I9cb33a54c2c8f9115bbe545a2338ca8e249b8db6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 253cd3c68bb4513ae2033c12c2f070ee391e5a13
Original-Change-Id: I71068dbdd00a719145410ef6ec466f001ae837ad
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264244
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9915
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to allow proper working of caches, set the correct
shareability option for normal memory.
BUG=chrome-os-partner:38222
BRANCH=None
TEST=Compiles successfully for foster and SMP works.
Change-Id: I5462cb0a2ff94a854f71f58709d7b2e8297ccc44
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e092916780716ac80c3608c1bd8ca2901fbb3bd1
Original-Change-Id: Idd3c096a004d76a8fd75df2a884fcb97130d0006
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9898
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=None
BUG=None
TEST=build coreboot, make sure there are fmov instructions
generated by the compiler, and boot to kernel
Change-Id: Ia99c710be77d5baec7a743a726257ef3ec782635
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f770a436a0692c8e57a8c80860a180330b71e82c
Original-Change-Id: Iab4ba979b483d19fe92b8a75d9b881a57985eed7
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262242
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9884
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to not duplicate the instruction cache invalidation
sequence provide a common routine to perform the necessary
actions. Also, use it in the appropriate places.
BUG=None
BRANCH=None
TEST=Built on ryu.
Change-Id: I29ea2371d034c0193949ebb10beb840e7215281a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5ab28b5d73c03adcdc0fd4e530b39a7a8989dae
Original-Change-Id: I8d5f648c995534294e3222e2dc2091a075dd6beb
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260949
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9871
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes quite a bit of code duplication between cpu_to_le32()
and clrsetbits_le32() style macros on the different architectures. This
also syncs those macros back up to the new write32(a, v) style IO
accessor macros that are now used on ARM and ARM64.
CQ-DEPEND=CL:254862
BRANCH=none
BUG=chromium:444723
TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu,
Storm and Urara. Booted on Jerry. Tried to compare binary images...
unfortunately something about the new macro notation makes the compiler
evaluate it more efficiently (not recalculating the address between the
read and the write), so this was of limited value.
Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b
Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254866
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch changes the argument order for the (now temporarily unused)
write32() accessor macro (and equivalents for other lengths) from
(value, address) to (address, value) in order to conform with the
equivalent on x86. Also removes one remaining use of write32() on ARM
that slipped through since coccinelle doesn't inspect header files.
BRANCH=none
BUG=chromium:444723
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.
Change-Id: Id5739b144f6a5cfd40958ea68510dcf0b89fbfa9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f02cae8b04f2042530bafc91346d11bb666aa42d
Original-Change-Id: Ia91c2c19d8444e853a2fc12590a52c2b6447a1b9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
startup.c provides function to enable CPU in any stage to save register data
that can be used by secondary CPU (for normal boot) or any CPU (for resume
boot). stage_entry.S defines space for saving arm64_startup_data. This can be
filled by:
1) Primary CPU before bringing up secondary CPUs so that the secondary can use
register values to initialize MMU-related and other required registers to
appropriate values.
2) CPU suspend path to ensure that on resume the values which were saved are
restored appropriately.
stage_entry.S provides a common path for both normal and resume boot to
initialize saved registers. For resume path, it is important to set the
secondary entry point for startup since x26 needs to be 1 for enabling MMU and
cache.
This also ensures that we do not fall into false memory cache errors which
caused CPU to fail during normal / resume boot. Thus, we can get rid of the
stack cache invalidate for secondary CPUs.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Compiles and boots both CPU0 and CPU1 on ryu without mmu_enable and stack
cache invalidate for CPU1.
Change-Id: Ia4ca0e7d35c0738dbbaa926cce4268143c6f9de3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9f5e78469313ddd144ad7cf5abc3e07cb712183a
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I527a95779cf3fed37392b6605b096f54f8286d64
Original-Reviewed-on: https://chromium-review.googlesource.com/231561
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9540
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Compiles successfully for ryu.
Change-Id: Ia4941a864dd3394689121a8c9ddfaaf6f5c150a1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1e43a081f7394b2014d89e723f816f1eca83ef49
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I60d77456573a2a1e854d9f3ca730237acfb77728
Original-Reviewed-on: https://chromium-review.googlesource.com/231698
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9539
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some registers are available only at EL3. Add conditional read/write functions
that perform operations only if currently we are in EL3.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Compiles and boots to kernel prompt.
Change-Id: Ic95838d10e18f58867b6b77aee937bdacae50597
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 62a0e324a00248dba92cb3e2ac2f4072d0e4e2a7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: Ia170d94adb9ecc141ff86e4a3041ddbf9045bc89
Original-Reviewed-on: https://chromium-review.googlesource.com/231549
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9538
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
TCR at EL1 is 64-bit whereas at EL2 and EL3 it is 32-bit. Thus, use 64-bit
variables to read / write TCR at current EL. raw_read_tcr_elx will handle it
automatically by accepting / returning 32-bit / 64-bit values.
BUG=chrome-os-partner:33962
BRANCH=None
TEST=Compiles and boots to kernel prompt.
Change-Id: I96312e62a67f482f4233c524ea4e22cbbb60941a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae71f87143f899383d8311a4ef908908116340d7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I459914808b69318157113504a3ee7cf6c5f4d8d1
Original-Reviewed-on: https://chromium-review.googlesource.com/231548
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9537
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Newly turned on CPUs need a place to go bring its EL3
state inline with expectations. Plumb this path in for
CPUs turning on as well as waking up from a power down
state. Some of the infrastructure declarations were
moved around for easier consumption in ramstage and
secmon. Lastly, a psci_soc_init() is added to
inform the SoC of the CPU's entry point as well do
any initialization.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and booted. On entry point not actually utilized.
Change-Id: I2af424c2906df159f78ed5e0a26a6bc0ba2ba24f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dbefec678a111e8b42acf2ae162c1ccdd7f9fd40
Original-Change-Id: I7b8c8c828ffb73752ca3ac1117cd895a5aa275d8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228296
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9422
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Instead of relying on CONFIG_MAX_CPUS to be the number of
CPUs running a platform pass the number of online cpus
from coreboot secmon. That allows for actually enabled
CPUs < CONFIG_MAX_CPUS.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Booted SMP kernel.
Change-Id: Iaf1591e77fcb5ccf5fe271b6c84ea8866e19c59d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3827af876c247fc42cd6be5dd67f8517457b36e7
Original-Change-Id: Ice10b8ab45bb1190a42678e67776846eec4eb79a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227529
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9397
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current implementation of secmon assumes just entry/arg
are passed to secmon for starting up a CPU. That's lacking
in flexibility. Therefore change secmon_params to contain
both the BSP and secondary CPUs' entry/arg information.
That way more information can be added to secmon_params when
needed.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and booted SMP kernel using PSCI and spin table.
Change-Id: I84c478ccefdfa4580fcc078a2491f49f86a9757a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c5fb5bd857a4318174f5b9b48e28406e60a466f8
Original-Change-Id: Iafb82d5cabc806b6625799a6b3dff8d77bdb27e9
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227548
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The cpu_info struct can be easily obtained at runtime
based on smp_processor_id(). To allow easier mapping
between cpu_info and PSCI entities add the mpidr info
to the cpu_info struct.
BUG=chrome-os-partner:32136
BRANCH=None
TEST=Built and booted in SMP. Noted MPIDR messages for each cpu.
Change-Id: I390392a391d953a3b144b56b42e7b81f90d5fec1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d091706f64f1fc4b1b72b1825cab82a5d3cbf23e
Original-Change-Id: Ib10ee4413d467b22050edec5388c0cae57128911
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226481
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9388
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Since PSCI dynamically determines which EL to transition
to based on SCR_EL3 there's no need to provide that
information.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted into kernel with MP.
Change-Id: Ia59bc8116ec4ae9bde2e6cad1861f76c14f7d495
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8bc5f7c8a114568ede98478c2fbea2f8b7d97f0c
Original-Change-Id: I8783b6315dca01464e14c9d2b20d009cf0beeb67
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218924
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The cpu.c contains some helpful construts as well as ramstage
devicetree handling. Split the 2 pieces so that cpu.c can be
reused in secmon.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted.
Change-Id: Iec0f8462411897a255f7aa289191ce6761e08bb0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4f30f1186950424b65df6858965a09ca51637e4f
Original-Change-Id: Ie87bd35bf1ccd777331250dcdaae07dab82d3d18
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218842
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9089
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to build upon the arm64 exception handlers need
to be registered. This provides very basic support to
register a handler for a specific exception vector.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted into kernel.
Change-Id: If046f0736765a2efeb23201c1d2d1f7f7db47dd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a82e5e8d5900ebef16abdb68701be6beeb9ca13a
Original-Change-Id: I0f68a48101ff48d582f5422871b9e7e5164357e4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218650
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9088
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's helpful to know if the current running CPU
is the BSP. Therefore, provide that semantic.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: I18cb8ab5149c3337e22b1f6046b1af266be7e47c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b390dc70b658c207cd3b64408713ec4cddab3172
Original-Change-Id: I3d5518d1f6d6a78b14f25bb7ef79727605064561
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218653
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9083
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to provide richer semantics for running code
on all CPUs add an all-but-self construct.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: If8dd28ff7f34d93592ab2025a65a2fd665e4e608
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9a4622f63a065f620f0c92ef92eeb2aa5c2b441d
Original-Change-Id: Id18dc0423bcb0016ed36ace659b3f858e824c46c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218652
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9082
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Secure monitor runs at EL3 and is responsible for jumping to the payload at
specified EL and also to manage features like PSCI.
Adding basic implementation of secure monitor as a rmodule. Currently, it just
jumps to the the payload at current EL. Support for switching el and PSCI will
be added as separate patches.
CQ-DEPEND=CL:218300
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles succesfully and secure monitor loads and runs payload on ryu
Change-Id: If0f22299a9bad4e93311154e5546f5bae3f3395c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e40a21115aeac1cc3c73922bdc3e42d4cdb7d34
Original-Change-Id: I86d5e93583afac141ff61475bd05c8c82d17d926
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214371
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9080
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Provide SCR_EL3 initialization on all CPUs. This settings were
chosen in such a way that nothing would need to be done if EL3
is abandoned after transitioning to EL2 or EL1. If persistent
EL3 program is used those SCR policies can be updated within
that program.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Built and booted through kernel. Printed out SCR setting for
each CPU.
Change-Id: Ib44acd8ae40dbca590740340632f5b72998e9dd8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f77b903afbafad7d439ec50fc48f1eaa37827d90
Original-Change-Id: Id659f0a98360fe8bbc80e5a623eba1526e81b400
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218300
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9078
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Transition library acts as a common interface for handling exceptions. The only
thing that needs to be implemented by exception.c is the exc_dispatch routine to
handle the exceptions as required.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully and exceptions are tested using test_exc
Change-Id: I90b4861909189adfe8449b9d4590965e6b743c00
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b83c9404407dd4dd2dda4e4eaed0b443f0f58425
Original-Change-Id: Ibb643d7ea2f9aabbc66439549ea2168fd66ced5e
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217143
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9071
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Coreboot compiles successfully
Change-Id: I1fba44974314effa1065e3637aaa5430584a4cc6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a4791232de764ebe40d9b3de5c63479dec7da003
Original-Change-Id: I95fdff5d1580faf4cb4f85d6acae7a834b8ff0bf
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218031
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9069
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully
Change-Id: Id9367b1fc836b7b8c8fd15b372673853493f67d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 561e9c4ec2b0657846d50bbc893ef7541230f932
Original-Change-Id: Ie950e893b01456c23af14304bd4dd8f61af9f244
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216905
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9064
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Allow read/write to registers at a given el. Also, make read/write registers at
current el call this newly added function.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully
Change-Id: I98f35b8d3eb5e292ac895102ad91b675325c08c7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 11d90df1fd92e03c25bfc463429a5f6a8d9d411d
Original-Change-Id: I17de4c4f3bc1ee804422efe5f4703b4dd65b51f2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216904
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to ease the process of reading and writing any register at current EL,
provide read_current and write_current assembly macros. These are included in
arch/lib_helpers.h under the __ASSEMBLY__ macro condition. This is done to allow
the same header file to be included by .c and .S files.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully
Change-Id: I51749b6e4ae7b1ffbaae28d915cd100a28959f26
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c11c7287f507fa398cbbee75abc2bd11140ef19b
Original-Change-Id: I1258850438624abfe3b1ed7240df0db0e7905be6
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216373
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9062
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The original purpose of soc_secondary_cpu_init() was to provide
a way for the SoC to run code on the secondary processors as
they come up. Now that devicetree based bringup is supported
there's no need to have this functionality.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Booted SMP into linux.
Change-Id: I6fa39b66a8b728d9982b0721480b7fae45af7c6e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1356ec527e2bc61043ccd7dea4a7ff5182b16f3e
Original-Change-Id: Ie5c38ef33efadb2d6fdb2f892b4d08f33eee5c42
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216927
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds SMP bring up support for arm64 cpus. It's
reliant on DEVICE_PATH_CPU devices in the devicetree.
Then for each enabled device it attempts to start then
initialize each CPU. Additionally, there is a cpu_action
construct which allows for running actions on an individual
cpu.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Booted both cores on ryu into linux.
Change-Id: I3e42fb668034c27808d706427a26be1558ad2af1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a733fd566a8e5793da5ff28f9c16c213f411372e
Original-Change-Id: I407eabd0b6985fc4e86de57a9e034548ec8f3d81
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216925
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9042
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a cpu-internal.h for internal prototypes to the
architecture specific code.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Built and booted.
Change-Id: I12a379f86056a9a2007a7c036d65b5e08e558d0e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5dcd488326f6496d80eb1fe1ff4414ebba1280e9
Original-Change-Id: I8ab520478954a3b43e8e0831d1883f9a791850aa
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216924
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9041
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Provide a simple spinlock implentation for arm64. A value
of 0 is unlocked and a value of 1 is locked.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Built and ran SMP bringup on ryu.
Change-Id: Ie88a715a6b51cd38a5fdd830583dae528cc49d67
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 14dab94610c96d6b1530c64d661833f8e613101c
Original-Change-Id: I3bf2d80b91112d04442455ff0fa3f16900b7327f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216923
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9040
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The spinlock header file was not residing in the correct place.
It needs to live under 'arch/smp'.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Built with SMP. spinlock.h found.
Change-Id: Ie0e974674a6ea8ec769ca0ce64eb888c4d094652
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 50079befdc3d43306e4ae9e543f7266f1ac99aa0
Original-Change-Id: I0e594cacfafcd6f30802c9563785ca09a2f7a2af
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216922
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9039
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The load-acquire/store-release operations (including exclusive
variants) form a basis for atomic operations. Also remove
the dmb, dsb, and isb functions from lib_helpers as barrier.h
already included these. Lastly, utilize barrier.h.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Built and ran SMP bringup using barriers.
Change-Id: I6304a478d769dc2626443005b4eec4325d8a06f4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8fac8d46b09d449d59f1b4f492d363392dcc4118
Original-Change-Id: I77ff160c635297a2c7cab71cb0d3f49f2536f6ff
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216921
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9038
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Provide access to the MIDR_EL1 register to obtain the
main id for determining CPU implementer and part/revision
information.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Built and printed the output of this function on ryu.
Change-Id: I42cec75072fc5e8b48f63c1971840fdc415e4326
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ad19ffe629d9f16b8fd07051ce73533e97fb3f5c
Original-Change-Id: I8b8506ebff8e6f9d7c4f96d7ff7e21803972961e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216423
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9032
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Provides a minimal API for coordinating with the SoC for
bringing up the secondary CPUs. There's no eventloop or
dispatcher currently nor does it do anything proper when
one of the secondary CPUs are brought up. Those decisions
are deferred to the SoC.
BUG=chrome-os-partner:31545
BRANCH=None
TEST=Built and brought up 2nd cpu using this API.
Change-Id: I8ac0418282e2e5b4ab3abfd21c88f51d704e10f9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5303ae3d6bfc9f8f908fcb890e184eb9b57f1376
Original-Change-Id: I3b7334b7d2df2df093cdc0cbb997e8230d3b2685
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214775
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9019
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
exception_hwinit() provides a path for just setting the hardware
state. This allows for other CPUs but the boot CPU for setting up
the appropriate vector table.
BUG=chrome-os-partner:31545
BRANCH=None
TEST=Built and booted to the kernel.
Change-Id: Ifd44ab697bce5cd351f05069519785dc80e2b866
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 76a1c9cb3df930b28469608ecb5c35be7ccdadd1
Original-Change-Id: Ib09c813b49a4f00daca0b53d9dca972251fcf476
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214773
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9017
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
No need to pass in the same value for the ttb after just
calling mmu_init(). All current users are setting this once
and forgetting it.
BUG=chrome-os-partner:31545
BRANCH=None
TEST=Built and booted on ryu.
Change-Id: Ie446d16eaf4ea65a34a9c76dd7c6c2f9b19c5d57
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bd77461d483b513a569365673c83badc752f4aa8
Original-Change-Id: I54c7e4892d44ea6129429d8a46461d089dd8e2a9
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214772
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9016
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of defining the stacks by Kconfig options include
the stack sizes for all the CPUs including each of their
exception stacks. This allows for providing each CPU
on startup a stack to work with.
Note: this currently inherits CONFIG_STACK_SIZE from x86 because
of the Kconfig mess of options not being guarded.
BUG=chrome-os-partner:31545
BRANCH=None
TEST=Built and booted into the kernel on ryu.
Change-Id: Ie5fa1a8b78ed808a14efeb1717b98d6b0dd85eef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6524993f016aac2ac8cd9dba9fbdd9a59260a2b6
Original-Change-Id: Ica09dc256e6ce1dd032433d071894af5f445acdb
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214669
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9013
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to accomodate MP on arm64 one needs to be able to determine
the current logical processor id. Because it depends on the SoC
implementation the SoC needs to provide this implementation.
BUG=chrome-os-partner:31545
BRANCH=None
TEST=Built.
Change-Id: I2f09df9bf7d4f829d8f45471bf7281a4ddba2fc8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6033e73d70c3b8296b36ff36b4b848b176917e12
Original-Change-Id: I9511b54b5a1ab340b0f1309b0d9976be68b50903
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214663
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9007
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31515
BRANCH=None
TEST=test_exception generates a page fault which is handled by the exception
handler and execution continues after eret from the exception
Change-Id: Ie550492d2ed21b2c3009b5627f1e1a37429e6af0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e29fe77745d10e840c02498e54a0c53835530e5e
Original-Change-Id: I29b7dabaece9b11a04ee3628d83513d30eb07b1d
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/213661
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9000
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Non-cacheable normal memory is needed when one wants an easy way
to have a DMA region. That way all the reads and writes will be
picked up by the CPU and the device without any cache management
operations.
BUG=chrome-os-partner:31293
BRANCH=None
TEST=With a bevy of other patches can use a carved out DMA region
for talking to USB.
Change-Id: I8172f4b7510dee250aa561d040b27af3080764d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a5bc7ab1709edd97d8795aa9687e6a0edf26ffc6
Original-Change-Id: I36b7fc276467fe3e9cec4d602652d6fa8098c133
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/212160
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8924
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add support for initializing and enabling mmu for armv8. Using 64KiB granule and
33 bits per VA, thus total VA address space is 6GiB. PA Range is 64GiB. Makes
use of memrange library to get a list of all the mmap regions from the SoC to
initialize XLAT table.
Currently, all calculations in mmu.h are based on the assumptions that max 33
bits are used in VA and granule size is 64KiB. Changes in these assumptions will
have to reflect in the dependent calculations as well.
BUG=chrome-os-partner:30688
BRANCH=None
TEST=Compiles rush successfully and boots until "payload not found". Goes past
all the earlier alignment errors.
Original-Change-Id: Iac1df15f0b81dcf64484a56b94f51357bcd67cc2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208761
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 6fe96360c03342115f849074f9e45a2c4e210705)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5360a3be95f198bd0b4f79b62f31228cc7a9c285
Reviewed-on: http://review.coreboot.org/8646
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Correct function names to make them consistent with generic calling name
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I50499936e1c8da0aafd7e36a22c2c6ab373230f6
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/205582
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 16668529527224fca3086ee88955d29e3a268516)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I449e63b05680ca12ae81a3260fc03836686d7317
Reviewed-on: http://review.coreboot.org/8469
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Add support for library functions required to access different system registers:
1) PSTATE and special purpose registers
2) System control registers
3) Cache-related registers
4) TLB maintenance registers
5) Misc barrier related functions
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I8809ca2b67b8e560b34577cda1483ee009a1d71a
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203490
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 5da840c5d1f3d8fdf8cc0d7c44772bf0cef03fbb)
armv8: GPL license armv8 lib
BUG=None
BRANCH=None
TEST=Compiles successfully.
Original-Change-Id: Ibe0f09ef6704ad808cc482ffec27a4db32d7f6fd
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250950
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit bc115869bb0bcedbc284677ca5743b9ab40bfc7e)
Get the library and the GPL license in a single commit.
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4753a6b0d13a6f7515243bfa8e749e250fdd749d
Reviewed-on: http://review.coreboot.org/8465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: Ic8f5d91f6635ef12845ab049a20df5a6e33bbf55
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203142
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit ecf7822812d8745af74eaf135b7b806c23ef51a2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I79abbded94376ba90a8c729aaf856ce303509e48
Reviewed-on: http://review.coreboot.org/8410
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: Marc Jones <marc.jones@se-eng.com>
|
|
Add support for enabling different coreboot stages (bootblock, romstage and
ramstage) to have arm64 architecture. Most of the files have been copied over
from arm/ or arm64-generic work.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/197397
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 033ba96516805502673ac7404bc97e6ce4e2a934)
This patch is essentially a squash of aarch64 changes made by
these patches:
d955885 coreboot: Rename coreboot_ram stage to ramstage
a492761 cbmem console: Locate the preram console with a symbol instead of a sect
96e7f0e aarch64: Enable early icache and migrate SCTLR from EL3
3f854dc aarch64: Pass coreboot table in jmp_to_elf_entry
ab3ecaf aarch64/foundation-armv8: Set up RAM area and enter ramstage
25fd2e9 aarch64: Remove CAR definitions from early_variables.h
65bf77d aarch64/foundation-armv8: Enable DYNAMIC_CBMEM
9484873 aarch64: Change default exception level to EL2
7a152c3 aarch64: Fix formatting of exception registers dump
6946464 aarch64: Implement basic exception handling
c732a9d aarch64/foundation-armv8: Basic bootblock implementation
3bc412c aarch64: Comment out some parts of code to allow build
ab5be71 Add initial aarch64 support
The ramstage support is the only portion that has been tested
on actual hardware. Bootblock and romstage support may require
modifications to run on hardware.
Change-Id: Icd59bec55c963a471a50e30972a8092e4c9d2fb2
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6915
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
