summaryrefslogtreecommitdiff
path: root/payloads/libpayload/arch
AgeCommit message (Collapse)Author
2014-08-10coreboot_tables: reduce redundant data structuresJulius Werner
There are three coreboot table tags that all define some kind of memory region, and each has their own homologous struct. I'm about to add a fourth so I'll just clean this up and turn it into a generic struct lb_range instead. Change-Id: Id148b2737d442e0636d2c05e74efa1fdf844a0d3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167154 (cherry picked from commit 22d82ffa3f5500fbc1b785e343add25e61f4f194) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6456 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-10armv7: Support stack dump after exceptionsJulius Werner
This patch enhances the armv7 exception handlers in Coreboot and libpayload to show the correct SP and LR registers from the aborted context, and also dump a part of the current stack. Since we cannot access the banked registers of SVC mode from a different exception mode, it changes Coreboot (and its payloads) to run in System mode instead. As both modes can execute all privileged instructions, this should not have any noticeable effect on firmware operation (please correct me if I'm wrong!). Change-Id: I0e04f47619e55308f7da4a3a99c9cae6ae35cc30 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170045 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Vincent Palatin <vpalatin@chromium.org> (cherry picked from commit d0db2f5e938200e3f5899c5e1f1606ab2dd5b334) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6538 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-05libpayload: Change CONFIG_* to CONFIG_LP_* in the kconfig.Gabe Black
When libpayload header files are included in the payload itself, it's possible that the payloads config settings will conflict with the ones in libpayload. It's also possible for the libpayload config settings to conflict with the payloads. To avoid that, the libpayload config settings have _LP_ (for libpayload) added to them. The symbols themselves as defined in the Config.in files are still the same, but the prefix added to them is now CONFIG_LP_ instead of just CONFIG_. Change-Id: Ib8a46d202e7880afdeac7924d69a949bfbcc5f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65303 Reviewed-by: Stefan Reinauer <reinauer@google.com> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 23e866da20862cace0ed2a67d6fb74056bc9ea9a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6427 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-08-01armv7: add wrapper for DCCSW (data cache clean by set/way)David Hendricks
This adds a wrapper for data cache clean (without invalidate) by set/way. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I09ee1563890350a6c1d04f1b96ac5d0c042e2af2 Reviewed-on: https://gerrit.chromium.org/gerrit/66118 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit 05bc4f8564c547eacb9cc840a03b916b3c1c6001) armv7: clean but do not invalidate caches between stages This cleans the caches without invalidating them between stages. The dcache content should still be valid when the next stage begins, so we should see a small performance gain. (thanks to gabeblack for pointing this out) Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: Ie18d163f3a78e2786e9fbc7479c8bd896b8ac3aa Reviewed-on: https://gerrit.chromium.org/gerrit/66119 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit 619bfe4cf9b93847e38d03d7076beb78fbfa1d1d) armv7: Make coreboot and libpayload cache files the same This merges the difference between the ARM version of cache.c and cache.h for libpayload and coreboot. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I246d2ec98385100304266f4bb15337a8fcf8df93 Reviewed-on: https://gerrit.chromium.org/gerrit/66120 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit 0c92f694034f1e94a8aa7811251738c9dc3db2c6) ARM: Fix cache cleaning operation. There was no behavior defined for OP_DCCSW in dcache_op_set_way, so it silently did nothing. Since we started using that to clean the cache between stages and I have a change that enables caches earlier on, this was preventing booting on pit. Old-Change-Id: I3615b6569bf8de195d19d26b62f02932322b7601 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/66234 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 99241468cb9dcc86fcca9266ffe72baa88a1f79f) libpayload: Fix data cache cleaning on ARM. A similar fix was made to coreboot where OP_DCCSW was silently not doing anything in dcache_op_set_way. Old-Change-Id: Ia0798aef0cd02da7d1a14b7affa05038a002ab3b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/66236 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 6f6596a182a6780a2e997ac320733722697990c5) Squashed five related commits. Change-Id: I763d42bd5dd9f58734e1e21eb7c8ce3ce2ea56ee Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6418 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-31libpayload: provide missing cbfs symbolAaron Durbin
The generic cbfs code relies on the libpayload_init_default_cbfs_media symbol. However, none was provided for ARM. Provide an empty implementation that returns an error as there is no generic way to locate the default cbfs media. Old-Change-Id: Ie0d06fbe6fc790c9d92434cd2d60922908acdc69 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56805 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> (cherry picked from commit d3410c28ef9f37b832e2fa2d18351dda332bc9f7) libpayload: place dummy_media.c in correct object list The commit introducing dummy_media.c was placed in the libc object list. This wasn't correct. It should be in the libcbfs object list as well as guarded by CONFIG_CBFS. Old-Change-Id: Iace43fff8f85f60ecac5e6eb8350cd1f3ee9d35e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56925 (cherry picked from commit 7937c7c5e95a934593bc0cedd5f4496b4770c303) Squashed two related commits. Change-Id: I84cd132b44cc2ea5b29acf109a3562baaeede9c6 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6411 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-01-30libpayload: Parse CBMEM ACPI GNVS pointerDuncan Laurie
Pull the ACPI GNVS pointer from CBMEM and expose it in the sysinfo structure for use by payloads. BUG=chrome-os-partner:24380 BRANCH=none TEST=build and boot rambi with emmc in ACPI mode Change-Id: I47c358f33c464a4a01080268fb553705218c940c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179900 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5016 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-12libpayload: Get rid of a compiler warningGabe Black
Change-Id: I7252925ef5c4efb69cad6b6fa179031162cf8e74 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/61058 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4346 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12libpayload: armv7: Add cache control function to invalidate range.Hung-Te Lin
When dealing with DMA, we need a function to invalidate cache without corrupting contents on main memory (clean). Change-Id: I28e632ae57a7b7ed1accee74e76045b92f92a699 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61078 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4345 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-12payload: armv7: Fix dcache_clean_by_mva.Hung-Te Lin
The OP assigned by dcache_clean_by_mva must be handled in dcache_op_mva. Change-Id: Ib32262f0419453b2690d7c1a1c6602380b46a37f Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/61077 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4344 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-12-05libpayload: Clean up CFLAGSStefan Reinauer
- Add -ffreestanding and -fomit-frame-pointer for all platforms. - Add ARMv7 specific flags to the armv7 Makefile Change-Id: I71ab1b096e505940cc20c266bccd43917bcfad3a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56104 Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4317 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-03libpayload: ARM: Don't leave alignment checking on after the exception testGabe Black
Currently, the exception handling code on ARM in libpayload turns on alignment checks as an easy way to generate an exception for testing purposes. It was leaving it on which disabled unaligned accesses for other, unlreated code running later. This change adjusts the code so the original value of the alignment bit is restored after the test exception. Built and booted into depthcharge on pit with an unaligned accesses added after the call to exception_init in the depthcharge's main. Before this change, the access caused an exception. After this change, the access completed successfully. Change-Id: If92cab3cc8eabca7c5b0560ce88a8796a27fe3b2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/59372 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4255 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-12-03libpayload: Make the region to scan for the cb tables configurable.Gabe Black
The address range to scan for the coreboot tables varies from machine to machine based on the range memory occupies on the SOC being booted and on the amount of memory installed on the machine. To make libpayload work on different ARM systems with different needs, this change makes the region to scan configurable. In the future, we might want to come up with a more automatic mechanism like on x86, although there's less consistency on ARM as far as what ranges are even memory in the first place. Change-Id: Ib50efe25a6152171b0fbd0e324dbc5e89c527d6e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/59242 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4254 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-12-03libpayload: Add missing break statement in coreboot table parsingStefan Reinauer
Otherwise the code would try to parse GPIOs when encountering a mainboard entry in the coreboot table. This never caused any problems because the mainboard entry is parsed before the GPIO entry. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I1443bda8585a990a39115743d48304ec4b54bccb Reviewed-on: https://gerrit.chromium.org/gerrit/59292 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4252 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-11-26libpayload: Drop PowerPC architectureStefan Reinauer
This was never completed / working and we have the working ARMv7 port for an architecture template, so get rid of this dead code. Change-Id: Ic2c1267ee5546dd6e1b63220c263b2fa86c8ae33 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/56065 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/4235 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25ARM: Update the size/location of the coreboot tables so we can boot againGabe Black
Change-Id: I3235f42c7faaf28a63455162ea55dc1a6bebd1f5 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-by: Hung-Te Lin <hungte@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/48290 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/4128 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-25armv7: import updated cache/MMU stuff from corebootDavid Hendricks
This imports the cache/MMU code from coreboot as of 1877cee. Change-Id: I97ec8b9640921a94a4b27d89e4ae6185e9f96f18 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/48288 Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4134 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-10ARM: Tell the linker memset and memcpy are functions.Gabe Black
The memset and memcpy functions are assembled as ARM code, likely because that's the default of the assembler. Without special annotation, the assembler and linker don't know that those symbols are functions which need special handling so that ARM/thumb issues are handled properly. This change adds that annotation which gets those functions working in Coreboot which is compiled as thumb. Libpayload and depthcharge are compiled as ARM so they don't *need* the annotation since it just works out in ARM mode, but it's the safe thing to do in case we change that in the future. We should explicitly select ARM vs. thumb when assembling assembly files to be consistent across builds and toolchains. Change-Id: I814b137064cf46ae9e2744ff6c223b695dc1ef01 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3672 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-30armv7: import updated cache/MMU stuff from corebootDavid Hendricks
This imports the newest cache and MMU code from coreboot. This time it's so new that it hasn't even been checked in to coreboot. However, this version at least allows DMA to work properly for the MSHC driver. So even if we rebase a few more times, this version is at least a step in the right direction. Note: This omits the stuff that sets up dcache policy since libpayload should not need to worry about that and it depends on cbmem stuff. Change-Id: Idd42b083e8019634aaaa44d5bf5b51db6c3912f5 Signed-off-by: David Hendricks <dhendrix@google.com> Reviewed-on: http://review.coreboot.org/2975 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-03-30armv7: import new cache maintenance API from corebootDavid Hendricks
This imports the new cache maintenance API from coreboot at commit bba8090. This is a BSD-licensed implementation which exposes cache maintenance opertaions necessary for payloads for things such as DMA transfers. Change-Id: I554676db89517bebc6edae4f7ab7e5882e6f986d Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2974 Tested-by: build bot (Jenkins)
2013-03-29libpayload: add x86 ROM variable MTRR supportAaron Durbin
On x86, coreboot may allocate a variable range MTRR for enabling caching of the system ROM. Add the ability to parse this structure and add the result to the sysinfo structure. An example usage implementation would be to obtain the variable MTRR index that covers the ROM from the sysinfo structure. Then one would disable caching and change the MTRR type from uncacheable to write-protect and enable caching. The opposite sequence is required to tearn down the caching. Change-Id: I3bfe2028d8574d3adb1d85292abf8f1372cf97fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2920 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-22libpayload: Add comments on virtual pointers in lib_sysinfoNico Huber
After another incident related to virtual pointers in lib_sysinfo (and resulting confusion), I decided to put some comments on the matter into the code. Remember, we decided to always use virtual pointers in lib_sysinfo, but it's not always obvious from the code, that they are. See also: 425973c libpayload: Always use virtual pointers in struct sysinfo_t 593f577 libpayload: Fix use of virtual pointers in sysinfo Change-Id: I886c3b1d182cba07f1aab1667e702e2868ad4b68 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/2878 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-14libpayload: add support for vboot_handoffAaron Durbin
The vboot_handoff structure needs to be parsed from the coreboot tables. Add a placeholder in sysinfo as well as the ability to parse the coreboot table entry concering the vboot_handoff structure. Built with unified boot loader and ebuild changes. Can find and use the VbInitParams for doing kernel selection. Change-Id: If40a863b4a445fa5f7814325add03355fd0ac647 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2720 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14libpayload: Generalize and redistribute timekeeping codeGabe Black
The timekeeping code in libpayload was dependent on rdtsc, and when it was split up by arch, that code was duplicated even though it was mostly the same. This change factors out actually reading the count from the timer and the speed of the timer and puts the definitions of ndelay, udelay, mdelay and delay into generic code. Then, in x86, the timer_hz and timer_get_raw_value functions which used to be in depthcharge were moved over to libpayload's arch/x86/timer.c. In ARM where there isn't a single, canonical timer, those functions are omitted with the intention that they'll be implemented by a specific timer driver chosen elsewhere. Change-Id: I9c919bed712ace941f417c1d58679d667b2d8269 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2717 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14libpayload: Don't declare the loop counter within the for loopGabe Black
'for' loop initial declarations are only allowed in C99 mode I didn't realize we don't enable 14 year old features when building libpayload, and I must have accidentally not rebuilt everything when making my final tweaks to my earlier change. Change-Id: I6caeeffad177b6d61fa30175f767e85084c061f4 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2718 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-03-13libpayload: Move over to the payload's stack during startupGabe Black
Don't keep using the coreboot stack on ARMv7. Change-Id: I734c5d77f8584e30ee0c720d41e21e3040f56db4 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2668 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Make whether or not there's an IO address space configurableGabe Black
Default it to no to be consistent with the other architecture wide options (endianness), and turn it on explicitly for x86 and PowerPC. Change-Id: Idda26d580156bbbf08ea11b28abe75cfa6b594b2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2658 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-04libpayload: Catch exceptions and print out an error message.Ronald G. Minnich
Give some indication what happened instead of just crashing. As part of setup, cause an exception and make sure that we get the right one, and that we recover correctly. Hence we have some assurance that if they really happen we can handle them. Built and booted into test payload on Snow. Saw the built in test function worked correctly. Artificially added code which got an exception and saw that the error information prints correctly. Change-Id: I2e0d022f090ee422fb988074fbb197afa2485caa Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2569 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-03-01libpayload: Mark "halt" as a function.Gabe Black
The linker uses that info so interworking can work correctly. Built and booted into depthcharge on Snow and saw interworking start to work correctly. Change-Id: I0ac54f1c424ec70f8244edf6541a10b089ce47b4 Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2568 Tested-by: build bot (Jenkins)
2013-02-26libpayload: Change the measurement interval for get_cpu_speed to 2 ms.Gabe Black
The interval used to be about 55 ms which is excessively long. Coreboot only waits for 2 ms and gets a reasonable answer. That should be good enough for us as well. Change-Id: I4d4e8b25b6ba540c9e9839ed0bbaa1f04f67cce1 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2520 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-20libpayload: Fix license headersStefan Reinauer
Not only were these files checked in with the Chromium OS Authors copyright, but in addition they were wrongly licensed as GPL. Switch to 3-clause BSD (and, since we're changing it, fix copyright, too) Change-Id: I3656c1f4304d53e343d89bb7c909fd4b929249f4 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2456 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-15libpayload: Use an appropriate range of memory when looking for cb tables.Ronald G. Minnich
These live at the bottom of memory on x86, but that's IO mapped on the exynos. The particular range used will likely need to be configurable, but this will make it work in one more case than it used to. Change-Id: I4d4963b9732cf538d00f8effb4398f30cbbde6aa Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2410 Tested-by: build bot (Jenkins) Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-15libpayload: add a ldscript for armRonald G. Minnich
I think this needs to be its own ldscript. I'm pretty sure this one is going to need some work however. Is libpayload PIC? That would be best if so. Change-Id: I44578d70dfa72de527af8901a86583c2a60130ec Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2398 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-02-14libpayload; put the ldscript into an arch-dependent directory pathRonald G. Minnich
Since it's utterly architecture-dependent, put it in arch/x86. Avoid the temptation to make yet another directory with just one file in it. Fix the makefile to pick up the proper arch-dependent script. Change-Id: I21ea02551a97bdcbc38419714f3b38cf8335c178 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2389 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-12libpayload: New CBFS to support multiple firmware media sources.Hung-Te Lin
Upgrade CBFS in libpayload to use new media-based implementation from coreboot ( http://review.coreboot.org/#/c/2182/ ). Old CBFS functions (cbfs_find, cbfs_find_file, get_cbfs_header) are still supported, although the recommended way is to use new CBFS API. To migrate your existing x86 payload source: - Change cbfs_find to cbfs_get_file - Change cbfs_find_file to cbfs_get_file_content - Prefix every CBFS call with a CBFS_DEFAULT_MEDIA argument. Ex, char *jpeg_data = cbfs_find_file("splash.jpg", CBFS_TYPE_BOOTSPLASH); => char *jpeg_data = cbfs_get_file_content( CBFS_DEFAULT_MEDIA, "splash.jpg", CBFS_TYPE_BOOTSPLASH); The legacy setup_cbfs_from_{ram,flash} is also supported, although the better equivalent is to make a new media instance: struct cbfs_media ram_media; init_cbfs_ram_media(&ram_media, start, size); char *data = cbfs_get_file_content(&ram_media, "myfile", my_type); Verified by being successfully linked with filo. Change-Id: If797bc7e3ba975d7e3be905c59424f7a93b8ce11 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2191 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-14libpayload: Initial ARMv7 portStefan Reinauer
This compiles, but it's not tested yet. Change-Id: I2f73a814649aa36c39af3e77cefd8a968671f5c0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2035 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-14libpayload: rename i386 to x86Stefan Reinauer
Change-Id: Ia9170bd3d04e76dbf9321ca7ea4be23b5e468d21 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2033 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-10libpayload: Fix use of virtual pointers in sysinfoNico Huber
In I4c456f5, I falsely identified struct cb_string.string as a pointer which it is not. So we don't need phys_to_virt() here. Change-Id: I3e2b6226ae2b0672dfc6e0fa4f6990e14e1b7089 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1987 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-30Change TARGET_I386 to ARCH_X86David Hendricks
This renames TARGET_I386 to ARCH_X86 to make it more uniform with other parts of the codebase, e.g. cbfs_core.h from cbfstool. Change-Id: I1babcc941245ed1dde0478a21828766759373a42 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1961 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2012-11-15libpayload: Always use virtual pointers in struct sysinfo_tNico Huber
We had mixed virtual and physical pointers in struct sysinfo_t. Some being virtual by accident which led to problems when we tried to reinitialize lib_sysinfo after relocating FILO (to get intentionally virtual pointers valid again). I guess this didn't cause much trouble before, as lib_get_sysinfo() was always called with physical addresses being equal to their virtual counterparts. For FILO, two possibilities seem practical: Either, have all pointers in struct sysinfo_t physical, so relocation doesn't hurt. Or, have all pointers virtual and call lib_get_sysinfo() again after relocation. This patch goes the latter way, changing the following pointers for situations where virtual pointers differ from physical: .extra_version .build .compile_time .compile_by .compile_host .compile_domain .compiler .linker .assembler .cb_version .vdat_addr .tstamp_table .cbmem_cons .mrc_cache We could also just correct the accidentally virtual pointers. But, IMO, this would lower the risk of future confusion. Note 1: Looks like .version gets never set. Note 2: .option_table and .framebuffer were virtual pointers but treated like physical ones. Even in FILO, this led to no problems as they were set before relocation. Change-Id: I4c456f56f049d9f8fc40e62520b1d8ec3dad48f8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1855 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-15libpayload: Use #ifdef for CONFIG_* checksNico Huber
Libpayload uses the linux kernel's config style, where CONFIG_* defines don't get written for unset tristates. Change-Id: I3f832cf86bca9a1e153d96af4bf6434a19eba2f6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1847 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-09libpayload: Add an option to skip console initialization on startup.Gabe Black
A payload may want to decide whether it uses certain input/output consoles, or that it wants support for outputing to a particular device but not to use that device as a console. This change adds a config option which skips the call to console_init in start_main. Change-Id: I32b224d4d0bd3a239b402ecb09ee907d53225735 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1732 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-08Refactor the endianness conversion functions and header files.Gabe Black
The endianness of an architecture is now set up automatically using Kconfig and some common code. The available conversion functions were also expanded to go to or from a particular endianness. Those use the abbreviation le or be for little or big endian. Built for Stumpy and saw coreinfo cbfs support work which uses network byte order. Used the functions which convert to little endian to implement an AHCI driver. The source arch is also little endian, so they were effectively (and successfully) inert. Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08Update libpayloads understanding of the coreboot tables.Gabe Black
Give it somewhere to put the new info in sysinfo, and tell it how to parse the new tables which it doesn't yet understand. Change-Id: I01d3318138696e6407553c27c1814f79e3fbc4f8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-07libpayload: Add faster, architecture specific versions of memset and memcpy.Gabe Black
Change-Id: I0f3a82de860fd3afa10a557b37fb90fe6b06ae90 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1726 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-11-07Update the way serial info is read from the coreboot tables.Gabe Black
This information is now stored in a structure instead of in a few seperate fields. libpayload hadn't been updated to reflect the new layout or to consume the new information intelligently. Change-Id: Ice3486ffcdcdbe1f16f9c84515120c591d8dc882 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1724 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-03-31Make libpayload parse the coreboot tables before setting up the consolesGabe Black
At least one of the console drivers, coreboot fb, uses information in the sysinfo structure to set itself up. If that structure hasn't been populated, the driver decides that there is no framebuffer and disables itself. Reversing the order these are set up fixes that problem. Change-Id: Idd8b5518980dfdd82fd4359dd0133ab7736fc428 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/816 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-07Cleanup access to vendor/part # infoPhilip Prindeville
Instead of macros to access MAINBOARD record, use convenience functions. Store pointers to MAINBOARD and HEADER for use outside of CB code. Change-Id: I074e3a0df7d25726cbd942538bfdc5a63dd17e12 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/502 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Let lib_get_sysinfo() pass through the success of get_coreboot_info()Philip Prindeville
The return status of get_coreboot_info() might be handy to a platform driver calling lib_get_sysinfo() to test for the presence of coreboot. Change-Id: I0176c93ee92c9dff733112026ee50f2ca797bdff Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/503 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Fix missing VM mappingPhilip Prindeville
When processing FORWARD records, we weren't accounting for the pointer being in the physical address space and not the virtual space instead. Change-Id: I35ef637fbec7886d4cfeac5fd650a17eae8d555a Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/499 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Use void pointers for untyped memoryPhilip Prindeville
To avoid unnecessary casts, we can use untyped pointers when accessing individual records. Change-Id: I1d628d6e25f1e53b4fee34e7c2c4688a789c45a3 Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/498 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-24Replace UNPACK_CB64 macro with inlinePhilip Prindeville
Having submitted a module based on coreboot to LKML for acceptance, it was requested that fewer macros and more inlines be used (because of their superior type-checking when performing pointer casts, etc). This is the first of several changes to make the relevant parts of coreboot comply to linux code standards. Change-Id: Iffe7061fa62fa639e0cb6ccb9125eb3403d06b1a Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-on: http://review.coreboot.org/495 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-03libpayload: Put coreboot version into lib_sysinfoMathias Krause
Change-Id: I22319efe90e475c66b9556f734a7a5e54f7c59bc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-21Extend coreboot table entry for serial portsStefan Reinauer
Add information about memory mapped/io mapped base addresses. and fix up libpayload to use the same structures Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I5f7b5eda6063261b9acb7a46310172d4a5471dfb Reviewed-on: http://review.coreboot.org/261 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-11Don't do a call as the first instruction in libpayload.Marc Jones
Doing a call before the payload has set up its stack is risky. The stack may not be in a favorable location. Normally this is not an issue with coreboot or other well behaved callers. Change-Id: Ie6f6748a471324b29ebad045c807dfc9f4b92034 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/240 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-03Fixes to the libpayload build systemPatrick Georgi
- its Makefile is part of the libpayload project - fix conversion bug in powerpc's Makefile.inc Change-Id: I84f2da092c3733ea7d0f232cb3768078cf13dfd5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/79 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-06-30Reduce warnings/errors in libpayload when using picky compiler optionsPatrick Georgi
The new build system uses quite a few more -W flags for the compiler by default than the old one. And that's for the better. Change-Id: Ia8e3d28fb35c56760c2bd0983046c7067e8c5dd6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/72 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-06-30Use coreboot build system for libpayload, too.Patrick Georgi
This change makes building coreboot related projects more unified. Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/71 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-06-29Libpayload needs to clear the bss region.Marc Jones
Libpayload shouldn't count on coreboot or other payloads to clear memory. This fixes problems with payloads being loaded after or on top of each other. Change-Id: I30303d47e465e8921f47acab667c7998ba79fca7 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/66 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2010-06-24Attached patch moves functions out of the huge libpayload.h into headersPatrick Georgi
according to libc/posix traditions, to simplify porting applications to payloads. It also adds a couple of functions: strcasecmp, strncasecmp, strcat, strtol, strspn, strcspn, strtok_r, strtok, perror, exit, getpagesize Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5643 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25Add coreboot framebuffer support to libpayloadStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5295 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25prevent timer overflows in libpayloadStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5292 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-05-21This change adds PPC support to libpayload, and hooks it up in the buildPatrick Georgi
process. The PPC support is still stubbed, with commented out x86 code as guide line for an implementor. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4293 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 13:27:54 +0000