Age | Commit message (Collapse) | Author |
|
Change-Id: Ie91c990d9c2bcab8292a75d87523a46d5694a34a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13146
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing drive strength calibration code did not strictly
follow the BKDG-defined setup process. Bring the calibration
code in line with the BKDG recommendations.
Change-Id: I122eeb93958d88de59d0c3b2979f607afa2c52c3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13145
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When an Extended Temperature Range DIMM is installed on a channel
the refresh rate should be increased per the BKDG recommendations
to allow correct operation at higher temperature ranges.
Set fast refresh on a channel if an ETR DIMM is installed on that
channel.
Change-Id: I7a085d34efc78f3f0794a5cb33b88f27a5e6d54e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13144
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing CBMEM TOM calculations did not account for the CC6 save region
(when enabled); this resulted in CBMEM storage being placed on top of the
CC6 save region, which resulted in corrupt CBMEM data and a boot hang.
Change-Id: I32399da0438d7b16e05192449be625f9aa675b18
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13143
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing code unconditionally cleared the LDT tristate enable bit,
which was incorrect for C32 sockets. Update the code to be in line
with the BKDG recommendations.
Change-Id: I8095931973ea10f1467a6621092e88c6c494565a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13142
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The existing MCT initialization code was largely missing C32 socket-
specific configuration data. Add C32 socket-specific timing and ODT
values as specified in the BKDG.
Change-Id: I8eef8d5c8581f03d269663a338d5542744c5cdd7
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13141
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The existing code applied G34-specific speed limits to all socket
types. Update G34 and C32 specific speed limits to be in line with
BKDG recommendations.
Change-Id: I958ad333c47948ae741a56de5866af3e636fd24d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13140
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This was misspelled as EC_PURISM_LIBEM, causing the EC to not
get included in the build.
Change-Id: Iffbfb504926e1b90070c2dbf61c0c44ca8fb46bc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13178
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Help figure out which 'else' or 'endif' is attached to which 'if'.
Change-Id: I5ad068eb7c69f2dae57856f0e886f786563f7783
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13064
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
When C_ENVIRONMENT_BOOTBLOCK is selected link bootblock using the
memlayout.ld scripts and infrastructure. This allows bootblock on
x86 to utilize all the other coreboot infrastructure without
relying romcc.
Change-Id: Ie3e077d553360853bf33f30cf8a347ba1df1e389
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13069
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Instead of solely relying on malloc for building up an address space
for the range_entry objects allow one to supply a list of free entries
to memranges_init_empty(). Doing this and only calling malloc() in
ramstage allows a memranges oboject to be used in a malloc()-free
environment.
Change-Id: I96c0f744fc04031a7ec228620a690b20bad36804
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13020
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Replace with the more familiar AT&T syntax.
Tested by sha1sum(1)ing the object files, and checking the objdump that
the code in question was actually compiled.
Change-Id: Ibdc024ad90c178c4846d82c5308a146dd1405165
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13133
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Replace with the more familiar AT&T syntax.
Tested by sha1sum(1)ing the object files, and checking the objdump that
the code in question was actually compiled.
Change-Id: Ie85b8ee5dad1794864c18683427e32f055745221
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13132
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There can be an error when a cbfs file is added aligned or as
xip-stage and hashing of this file is enabled. This commit
resolves this error. Though adding a file to a fixed position
while hashing is used can still lead to errors.
Change-Id: Icd98d970891410538909db2830666bf159553133
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13136
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I79c94a1a951fe7e3493b839364a79fa2edb57ff3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13043
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I4889219f055aeefd449f9a9fcc4dc716b8c439d4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13042
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
BRANCH=none
BUG=chrome-os-partner:47609
TEST=remove servo board connection and insert/remove an empty SD card
in recovery mode.
Change-Id: I89a1cb6914d634f07ff71b9793eb29b711381524
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d21bf091a576574cb9e976447ee2b9a69748d2b6
Original-Change-Id: I2083605c9ad88841885dfaad48dcd27e6fb5161d
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313073
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13099
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Support memory range querying to above/below 4GiB.
Enable PRERAM_CBMEM_CONSOLE.
BRANCH=none
BUG=none
TEST=build and verified pass on oak board
Change-Id: If12ab2e9b8a129e2c82dd97b0493d9abdd6985a9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 139a3163ca867ec5676c6cb81fdec724c99a4a99
Original-Change-Id: Ie190f86f49ae88671f0738e2d6ceafdad58a93cc
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292559
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=boot to kernel
Change-Id: I0630d7c172e97f81abb1722afe028542e9e7f106
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 608c66df0543c76be7e811b06718464776631b55
Original-Change-Id: I03426085121bfa44c99c351d63db28f567d0ee1d
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313969
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13097
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Mimicking change I7037308d2, always compile mdelay for romstage.
The boards that #included delay.c in the romstage now rely on the linker
instead, which is a desirable cleanup.
Change-Id: I7e5169ec94e5417536e967194e8eab67381e7c98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13115
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=build pass and verified on rev3
Change-Id: I3849342e59c2b022db723ef0281cdd5153ae27cb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 495e978cd7381bd393099315ac6d60fe4446dd9f
Original-Change-Id: I9626d06746e5d0bf6698a9b8e7594c58e7ff213a
Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292689
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13096
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=none
BUG=none
TEST=build pass and test it ok on oak
Change-Id: Ib3d3f420dd576a63d7504dd0949040a3d430c675
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b17b03ed40b562a520185fa243bc4458daed6f23
Original-Change-Id: Ib9346f7913433ca82e8123feaf34fd0d6c071047
Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292687
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13095
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=none
BUG=none
TEST=test it ok on oak-rev3
Change-Id: I05233c5b9aa237dce1e6667ed09fe6d56f8e6350
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eb3efe8d0d1199ab836af01dc012cc97257b4fd4
Original-Change-Id: Ie1ab9421052dbd6aea8fbd762143cec0ce0d88f5
Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297942
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13094
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since backlight is controlled in depthcharge, we only configure
control pins as output pin and set them power-off in the coreboot
stage.
BRANCH=none
BUG=none
TEST=Saw DEV screen during boot process.
Change-Id: I3ed95e133417194ec8e774f42770bc61d879295f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9628781801943903ba99ba1071aa374c6fc0754
Original-Change-Id: Ifd101f3e08698561d8516d83bc7d502d210e3b66
Original-Signed-off-by: YH Huang <yh.huang@mediatek.com>
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292686
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13093
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=none
BUG=none
TEST=build and verified pass on oak board
Change-Id: I01eb059a3525bbbc5d17335cf43bc01be4355142
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc2bb9f5b461ec848df8aba07940b895401004f8
Original-Change-Id: I848468cec04a36659fbb4b898dff9368305d72ac
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292683
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13092
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=none
BUG=none
TEST=build and verified pass on oak board
Change-Id: I2680f6b87614362dffb27490bdeedf7125006c3f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc2bb9f5b461ec848df8aba07940b895401004f8
Original-Change-Id: I848468cec04a36659fbb4b898dff9368305d72ac
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292683
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13091
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add a new function mt_pll_set_aud_div() to set APLL for audio I2S.
The function is called by mainboard's configure_audio().
BRANCH=chromeos-2015.07
BUG=chrome-os-partner:41507
TEST=build and verified pass on oak board
Change-Id: Ia3c2f250627028422a7427b93d78d49545eb7a75
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bb18943f5e74af7723bd4e01d4da96c0b153a0f6
Original-Change-Id: I7996a8048f2e54ab09093cca3c8bc7447b61170f
Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/297225
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13090
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=none
BUG=none
TEST=none
Change-Id: Ic046c66c8e314bd61f96c2edbc5d832260590afe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 84de3a6f1a726938e2318814d6faaf6a7dd29ac0
Original-Change-Id: If29f28a092617532dd73e71e0dbe24fd930c3bf8
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292677
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12617
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I03740ce1afeb8607891fff61110a40dd98b80bdc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9b0cc22cb9e2010e28e854d9984c11149a71ae0b
Original-Change-Id: I6d6482a75cc40ed6183ee115d5d866257afa24af
Original-Signed-off-by: Tianping Fang <tianping.fang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292676
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12616
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
[pg: split into multiple commits]
Change-Id: I7a635c57ba271c8f568bd3334929acdf6a058ce8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2a3d867fd1e547cadc6c947f38082fddc2265d32
Original-Change-Id: I4f3a9b403b949d8ae8e3c393cc9441fb66ea5f1d
Original-Signed-off-by: liguo.zhang <liguo.zhang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292667
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13078
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
[pg: split into multiple commits]
Change-Id: If2cac5aecc5675048e0e2d28897b1a82e099de7d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2a3d867fd1e547cadc6c947f38082fddc2265d32
Original-Change-Id: I4f3a9b403b949d8ae8e3c393cc9441fb66ea5f1d
Original-Signed-off-by: liguo.zhang <liguo.zhang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292667
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12615
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=none
BUG=none
TEST=build pass
[pg: split into multiple commits]
Change-Id: I6e165cfa6a8345de3d8d5461a75d5ed626ece4ef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3ee2a20ec56359e917bb8f4825846c54d4f6276a
Original-Change-Id: Iedc81a85569b00524620e9ba128e7d77f17b0405
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292666
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13077
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BRANCH=none
BUG=none
TEST=build pass
[pg: split into multiple commits]
Change-Id: Ib46b243102969e2860479070e19640fb6cb9bdd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3ee2a20ec56359e917bb8f4825846c54d4f6276a
Original-Change-Id: Iedc81a85569b00524620e9ba128e7d77f17b0405
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292666
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12614
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The mt8173 boot rom expects the bootblock to be in a certain format.
gen-bl-img wraps our bootblock appropriately.
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I7486e548d356c5bd27261851f1f1bed620715e91
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fbcd7959e0fda595de91899ace7236037ac833d3
Original-Change-Id: Ib9df440bfa95cf06e8041491ecdb34c357047acd
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292664
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add support for verstage
[pg: split original commit into multiple commits]
Change-Id: I8c9fe02f26bf8fa8381a7502a778bed300684986
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13052
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add support for verstage
[pg: split original commit into multiple commits]
Change-Id: Ia43bc72a1fb36c6fad5be5654abee5fc19fc4093
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13051
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
[pg: split original commit into multiple commits]
Change-Id: I0dc8d9855c98c077d4a47227de0c504c3a846953
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13050
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add more code to verstage
[pg: split downstream commit into multiple commits]
Change-Id: I578a69a1e43aad8c90c3914efd09d556920f728e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2827aa08ff8712c0245a22378f3ddb0ca054255d
Original-Change-Id: I94a9ee2c00e25a37a92133f813d0cd11a3503656
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292662
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12612
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
[pg: split into multiple commits]
Change-Id: I19f970db40fb8563ef1b782a9606ca3766ef2ac5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 41acc14e9fe54924d20e4e5a2d1519251f0e1c87
Original-Change-Id: I2559be4191da9af523944563729171bd92a86cd0
Original-Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292661
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13076
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
[pg: split into multiple commits]
Change-Id: I82d982b40dd0bfaa7770a6b08c70b20337a46955
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 41acc14e9fe54924d20e4e5a2d1519251f0e1c87
Original-Change-Id: I2559be4191da9af523944563729171bd92a86cd0
Original-Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292661
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12611
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The script checks for a folder called documentation, while the folder
name is Documentation.
Without this change, I get this when running the script:
util/scripts/get_maintainer.pl: The current directory does not appear to be
a coreboot source tree.
Change-Id: Ied7ead7dfec33e9324f06d0ef60dcd6d7ba40104
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13062
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
TEST=Run DPTF
CQ-DEPEND=CL:12729
Original-Reviewed-on: https://chromium-review.googlesource.com/295478
Original-Tested-by: T.H. Lin <T.H_Lin@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ifa58ad72105d377c00df577f0e16ff1148b70119
Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com>
Reviewed-on: https://review.coreboot.org/12747
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We just had a user who spent a fair amount of time debugging a
failing build due to this option being enabled. Add a little
guidance that it probably shouldn't be enabled in the help text.
Change-Id: I9339e442876c1fcd18ea564041c6cc1201c18ae5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13066
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add a new Kconfig variable to enable the generation of
position and alignment attributes for cbfs files which
has constraints on this parameters.
In addition, modify Makefile.inc to support that option.
Change-Id: Ibd725fe69a4de35964bdb2dde106d9a7c37ffb47
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12968
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This adds support for booting the Purism Librem 13 mainboard
with coreboot, using binaries extracted from the original BIOS
and from a Broadwell Chromebook.
The following features have been tested on Ubuntu 15.10:
- Input: Keyboard and Trackpad
- SATA: Internal HDD and M.2 NGFF
- Network: WiFi and Ethernet
- USB: Bluetooth, Camera, SD Card, Ports (1xUSB2 and 1xUSB3)
- Video: Internal panel and HDMI port
- Internal speakers and microphone (headphones do not work)
- EC handling for battery, AC, lid, special keys
These binaries are extracted from the original BIOS:
- VGA BIOS
- Management Engine
- Intel Firmware Descriptor
These binaries are extracted from a Broadwell Chromebook BIOS:
- MemoryInit reference code binary
- SiliconInit reference code binary
This was developed and tested on an Librem 13 device. For those
who may want to do more development you can use EHCI debug and the
right USB port to get coreboot output.
Change-Id: Ia72e2d7ddc8ba5eef63819e5677122a5a5c705d8
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/13026
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
I thought we'd be using gnatmake but it's deprecated. Who needs it
anyway?
Change-Id: Ic08add72e771fa346c8a736ea901863ea5737d91
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13041
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Platforms that need to initialize WRDD package with the regulatory domain
information should implement function wifi_regulatory_domain.
A weak implementation is provided here.
Original-Reviewed-on: https://chromium-review.googlesource.com/314384
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: I84e2acd748856437b40bbf997bf23f158c711712
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12744
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Get the WRDD domain code from VPD and put it in global nvs.
WRDD method in wifi.asl returns this value from global nvs.
This wifi.asl should be included in dsdt.asl under the root port where wifi
module resides.
Original-Reviewed-on: https://chromium-review.googlesource.com/314373
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Change-Id: I809d28f10e80681471a785e604df102fb943a983
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
SVID config set to SVID_PMIC_CONFIG
BUG=none
BRANCH=none
TEST=build, boot to OS and check the register is set properly
Change-Id: If63b8112d4da0347c3a2c4c6d82b12a1f618291c
Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308576
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13117
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
WRDD method in wifi.asl returns the regulatory domain code. This value
is read from VPD in wifi_regulatory_domain() and saved to global nvs if
CONFIG_HAVE_REGULATORY_DOMAIN is enabled. It returns default code if
CONFIG_HAVE_REGULATORY_DOMAIN is not enabled.
Change-Id: I6e96bdf0fe93ae30a3afdcb63a0f89ce21023704
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13055
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id58f252e238cc3eb3fe9632493642d2a37c2a772
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12873
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
WRDD method in wifi.asl returns the regulatory domain code. This value
is read from VPD in wifi_regulatory_domain() and saved to global nvs if
CONFIG_HAVE_REGULATORY_DOMAIN is enabled. It returns default code if
CONFIG_HAVE_REGULATORY_DOMAIN is not enabled.
Original-Reviewed-on: https://chromium-review.googlesource.com/315131
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I52e0a052d31f36c6dc04e6a0953456350e7d86c3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We already do this for lines with all zeroes, so it makes sense to
treat all ones the same, for symmetry.
Change-Id: I4b637b07a49e0c649331aa200995b474dd9a2682
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12872
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I47776d842b8d684fc11ac448b751892ee2bc5ecc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Updating EC+PD takes long enough to update that it is good to
show the "critical update" screen when doing an EC/PD update.
BUG=chrome-os-partner:49650
BRANCH=glados
TEST=Build and boot on chell in normal mode with an EC update payload
and ensure that it reboots to enable graphics, shows the "critical
update" screen, and then reboots to disable graphics init again.
Change-Id: I436b96b95595b68273e594bdcfe2db0789ee26b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 08e45decd066f8f57ad103ff8b76cb7a916afa9e
Original-Change-Id: Ie250f4531437e4a0ce14b5aeb0fe564e9461fe4d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13075
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In order to support vboot requesting graphics support in normal
mode the VBT needs to be passed to FSP when it is requested
outside of the usual developer/recovery path.
To make this integrate cleaner use the generic bootmode provided
display_init_required() function instead. Also have it print a
message indicating when it does not pass VBT to GOP so it is
easier to see what happened in the console logs.
BUG=chrome-os-partner:49560
BRANCH=glados
TEST=Enable EC_SLOW_UPDATE on chell and test that when vboot
requests graphics support in normal mode FSP will get passed VBT
and bring up the panel.
Change-Id: I07bc54d37d687134b21baa60b5c278b5041241cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 41efd322951b8f3a8a687944832bfd89fd3014ca
Original-Change-Id: I1b68760eabbf3af1d962cb2a3199e504a7852042
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322782
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13074
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add flag handling for CONFIG_VBOOT_EC_SLOW_UPDATE to indicate
to vboot that it should show the "critical update" screen during
software sync for EC+PD.
In order to make this work on x86 where we do not run graphics
init in the normal path add handling for CONFIG_VBOOT_OPROM_MATTERS
and indicate to vboot when the option rom has been loaded.
BUG=chrome-os-partner:49560
BRANCH=glados
TEST=Build and boot on chell in normal mode with an EC update payload
and ensure that it reboots to enable graphics, shows the "critical
update" screen, and then reboots to disable graphics init again.
Change-Id: I5ca46457798a22e9b08aa2febfec05b01aa788f9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6a1bb8572c3485f64b9f3e759288321b44184e66
Original-Change-Id: I9f66caaac57bb9f05bc6c405814469ef7ddf4d0a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322781
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13073
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
File: src/soc/intel/skylake/flash_controller.c
Line: 192
Variable 'ret' might be used uninitialized in this function.
Hence initializing it with initial value of zero.
BRANCH=None
BUG=chrome-os-partner:48542
TEST=Built & booted Kunimitsu board.
Change-Id: I4e63612890057a2180f38b2e74419d98b02b70c1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b93ca876912d2336dae25b9b84e56ffb171b215b
Original-Change-Id: Ied8c909f5294d56daddb2806111d477246f98957
Original-Reviewed-on: https://chromium-review.googlesource.com/322082
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13072
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Override the default PL2 values with ones recommended by Intel.
BUG=chrome-os-partner:49292
BRANCH=glados
TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W
MMIO 0x59A0[15] to find PL1 enable/disable = Disable
MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W
Here PL2 is set to 25W and PL1 is disabled.
CQ-DEPEND=CL:321392
Change-Id: I338b1d4879ae1b5f760e3c1d16e379a2baa1c965
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fa6a115227385bef44abfacf58af306c16ed478a
Original-Change-Id: I3bfc50256c9bdd522c984b11faf2903d7c44c81f
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/322454
Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Preetham Chandrian <preetham.chandrian@intel.com>
Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/13071
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Override the default PL2 values with one recommended by
Intel. Disable PL1 configuration via MMIO register.
BUG=chrome-os-partner:49292
BRANCH=glados
TEST=MMIO 0x59A0[14-0] to find PL1 value (0x78) / 8 Watts = 15W
MMIO 0x59A0[15] to find PL1 enable/disable = Disable
MMIO 0x59A0[46-32] to find PL2 Value (0xC8) / 8 Watts = 25W
Here PL2 is set to 25W and PL1 is disabled.
Change-Id: I10742f91cc7179de1482d42392338976e8082afe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1b7771ccb34bdff92ffa9870733bd641e4644cdf
Original-Change-Id: Iefa93912008c71b41f2b20465e8acfd42bb6c731
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321392
Original-Commit-Ready: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Original-Tested-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Reviewed-on: https://review.coreboot.org/13070
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is a follow-up to CL:320623 to make veyron DRAM configs
uniform (except for Rialto).
As discussed in chrome-os-partner:43626, the mr[3] value and ODT
are set diffently for Mickey, thus the .inc files for other boards
have mr[3] = 1 and ODT disabled.
BUG=none
BRANCH=veyron
TEST=compile tested for veyron
Change-Id: I61798cfef779b0a3a510fd354ab53ffc63ca6c95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3b7cea6331bcec8aba09a204060e093d3dd732cb
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Iacf821645a2dcceaed1c1c42e3e1b1c312b31eab
Original-Reviewed-on: https://chromium-review.googlesource.com/321870
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13109
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Add functionality to cbfstool to generate file attributes
for position and alignment constraints. This new feature
can be activated with the -g option and will generate,
once the option has been enabled, additional attributes
for the files where position, xip or alignment was specified.
Change-Id: I3db9bd2c20d26b168bc7f320362ed41be349ae3a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12967
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Setup an initial rule to make use of the updatable CBFS regions in fmap.
Change-Id: I1fe1c6e7574854b735760c85590da6e297f6e687
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These are generated from depthcharge's board/*/fmap.dts using the
dts-to-fmd.sh script.
One special case is google/veyron's chromeos.fmd, which is used for a
larger set of boards - no problem since the converted fmd was the same
for all of them.
Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT
region ends up at the beginning of flash). This becomes necessary
because we're working without a real cbfs master header (exists for
transition only), which carved out the space for the offset.
Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Using the regions-for-file function, the build system can now declare
which (CBFS formatted) fmap region(s) a file should end up in.
The default is to put them in the regular COREBOOT region, but more
complex boot schemes (eg. vboot or fallback/normal) can use the function
to implement suitable policies.
Change-Id: I5e2e6b8e8759fda2cfb0144d5b998ba3e05650c8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13039
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
cbfs_add calculated a base address out of the alignment specification
and stored it in param.baseaddress.
This worked when every cbfstool invocation only added a single file, but
with -r REGION1,REGION2,... multiple additions can happen.
In that case, the second (and later) additions would have both alignment
and baseaddress set, which isn't allowed, aborting the process.
Change-Id: I8c5a512dbe3c97e08c5bcd92b5541b58f65c63b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- While we're working on fixing clang for coreboot, mark it as not
currently working so that it doesn't look like a reasonable choice.
- Add help on how to make the toolchains
Change-Id: Ib37093ca98d0328fad40dd7886c98d00f78bd58e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13053
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Implement wifi_regulatory_domain function by getting country code from
VPD
Original-Reviewed-on: https://chromium-review.googlesource.com/314385
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: Ia6a24df110a3860d404d345571007ae8965e9564
Signed-off-by: fdurairx <felixx.durairaj@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12743
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When coreboot is pulled in as a submodule, the .git "folder" is a file,
not a folder. Use the '-e' test instead of '-d' to allow for that.
Without this change, build.h will contain:
#define COREBOOT_VERSION "coreboot-unknown"
Change-Id: Ia141371cc892a0817d3566dc37ed0401675ad8d8
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13061
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Regions marked "(CBFS)" in the fmd weren't actually initialized with a
CBFS structure, just the default CBFS region (COREBOOT).
This made cbfstool add (etc) fail on those regions, so explicitly
initialize all those regions.
Change-Id: Ib321fa73cd2ecc8057b52408521fd214d6df7f2e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13059
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The CBFS flag in fmd files isn't stored in the fmap, so allow storing it
out of band using the -R option.
Change-Id: I342772878d7f8ce350de1a32dc7b2a5b07d6617d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13058
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Somehow I lost a $ on headerlist between when I tested the script
and when I submitted it, turning headerlist into plain text instead
of a variable name. This makes the test always pass.
- Fix variable bug.
- exclude this script from the check.
- update test for empty HEADER_DIRS variable.
Change-Id: I6080c520bc741e9d689f7c66ee97879afc8ba38c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13057
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We had another one that crept in while the linter was broken.
Change-Id: Ie690e2d7fc7ad31b3b674de1618723bb100ac961
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13056
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
commit a8aef3ac (cbfs_spi: Initialize spi_flash when initializing
cbfs_cache) introduced a bug that makes the rarely-used unified
CBFS_CACHE() memlayout macro break when used in conjunction with
cbfs_spi.c (since that macro does not define a separate
postram_cbfs_cache region). This patch fixes the problem by making all
three region names always available for both the unified and split
macros in every stage (and adds code to ensure we don't reinitialize
the same buffer again in romstage, which might be a bad idea if
previous mappings are still in use).
BRANCH=None
BUG=None
TEST=Compiled for both kinds of macros, manually checked symbols in
disassembled stages.
Change-Id: I114933e93080c8eceab04bfdba3aabf0f75f8ef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f270f88e54b42afb8b5057b0773644c4ef357ef
Original-Change-Id: If172d9fa3d1fe587aa449bd4de7b5ca87d0f4915
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/318834
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12933
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update Hynix memory configuration for mickey
so that it can boot on Hynix board.
BUG=chrome-os-partner:48637
BRANCH=master
TEST=Boot on mickey hynix board
Change-Id: Ibbf90cf76793005e23a720b97540b268ebf0864d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 071167b667685c26106641e6899984c7bd91e84b
Original-Change-Id: Id63d74cac36b9fd84bdb88969291982e14fa7d01
Original-Signed-off-by: Lang Zhang <kingsley_zhang@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320623
Original-Commit-Ready: lang zhang <kingsley_zhang@asus.com>
Original-Tested-by: lang zhang <kingsley_zhang@asus.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13048
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This provides symbols needed by CBFS and FMAP APIs, and allows running
run_romstage() in an x86 bootblock. Note that console-related files
are not added in this patch, as they are not essential for the
functinality on an x86 environment bootbock.
Change-Id: I36558b672a926ab22bc9018cd51aee32213792c2
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/12880
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These files provide symbols needed by console and uart drivers. This
was not an issue in the past, as we were not setting up a C
environment this early in the boot process.
Change-Id: Ied5106ac30a68971c8330e8f8270ab060994a89d
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12869
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of depending BOOTBLOCK_CONSOLE on a set of architectures,
allow the arch or platform to specify whether it can provide a C
environment. This simplifies the selection logic.
Change-Id: Ia3e41796d9aea197cee0a073acce63761823c3aa
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12871
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This header is only used for the bootblock compiled with ROMCC. As the
follow-on patches introduce a bootblock which does not make use of
ROMCC, rename this header to prevent confusion.
Change-Id: Id29c5bc6928c11cc7cb922fcfac71e5a3dcd113c
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/12867
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Migrate google/tidus (Lenovo ThinkCentre Chromebox) from Chromium
tree to upstream, using google/guado as a baseline.
TEST=built and booted tidus with full functionality
Change-Id: I9d7a976345566bee63226d1a44ba7d5ec137a742
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12801
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds basic ACPI support for the EC used on Purism Librem laptops.
The EC firmware appears to use the topstar laptop interface that has
support in the linux kernel for handling the special keys.
Supported functions:
- Battery information
- AC presence
- Lid switch
- Special keys (after loading topstar-laptop driver in linux)
- EC events for turbo enable/disable when on AC power
Things it does not do:
- EC SMI handling
- Fan is left under EC control
This was developed and tested on a Librem 13 laptop, and has not
been directly tested on an Librem 15.
Change-Id: Ib85a24e4cc8ab09b14147060043cff372863c2d1
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/13025
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This driver adds an SMBIOS table for Intel WiFi, but if SMBIOS
table generation is disabled then it should not attempt to
compile or it will fail to find the "get_smbios_data" member
of the device_operations structure.
Tested by compiling and booting on purism/librem13 with
SMBIOS table generation disabled.
Change-Id: Iac6c265da7daae1be4d7585dab7b54561ff4e631
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/13046
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This method creates named objects and must be serialized
to prevent a warning from IASL.
Tested by compiling purism/librem13 which includes this ASL.
Change-Id: Ic043ea479e681d2180421fcf8e0583b62e6fcd71
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/13045
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Mediatek's bootblock needs mdelay, which depends on a udelay
implementation. Compiling the file for bootblock poses no harm:
Either udelay exists (in which case mdelay is usable) or it doesn't in
which case we see exactly the same kind of build time error (just with
udelay instead of mdelay).
Change-Id: I7037308d2d79c5cb1b05bb2b57a0912ad11cd7a6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13049
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This tidies up the setting of the PCS register.
An assumption is made that bit 4 of this register is read-only,
which according to the ICH7 datasheet, it is.
Change-Id: Ia9b7d38a87e26236f6ebc951c169cae12b13139f
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13015
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Selecting Kconfig symbols that were created inside a 'choice' block
have no effect. Remove these so people aren't confused by them.
Change-Id: I7de9131d8d8afb65f86648afb9728f09cb67e122
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12970
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I0b79ddcf9248c6a6964dd60e30a6ea18e27bc186
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13032
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
On Apple OS X, the ntohl and htonl need including header,
#include <arpa/inet.h>
Please refer the manpage for these command on OS X,
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man3/htonl.3.html
Change-Id: Ia942c58f34637c18222fbf985b93c48abf63c5b8
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/11672
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The error informing the user that the CPU device cannot be
allocated has a typo incorrectly spelling "allocate" as
"allocte".
TEST=Compiled
Change-Id: I2a6bad56133e375e2fd6a670593791414bf0dc2c
Signed-off-by: Jacob Laska <jlaska91@gmail.com>
Reviewed-on: https://review.coreboot.org/13030
Tested-by: build bot (Jenkins)
Reviewed-by: Ben Frisch <bfrisch@xes-inc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
All southbridge interrupt pin and routing registers (D*IP and D*IR)
are left at their default values (see ICH9 datasheet) and this file
just has to reflect them.
Change-Id: I1e9732e178bb8422b284d80d9f3d34b72f2e2415
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13040
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
cbfstool tries opening the input file for write access even if the
command does not require modifying the file.
Let's not request write access unless it is necessary, this way one
can examine write protected files without sudo.
BRANCH=none
BUG=none
TEST=running
cbfstool /build/<board>/firmware/image.bin print
in chroot does not require root access any more.
Change-Id: Ic4e4cc389b160da190e44a676808f5c4e6625567
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ef6a8e25d9e257d7de4cc6b94e510234fe20a56d
Original-Change-Id: I871f32f0662221ffbdb13bf0482cb285ec184d07
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/317300
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12931
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Trivial fix for syntax highlighting in editors. Some get confused by
the double quote that doesn't have a close quote and stop highlighting
at that point. This comment closes the quote and the paren pair so
that they can recover.
Change-Id: I2bdb7c953a86905fc302d77eb9ad1200958800b7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13017
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The I2C data hold time can be vary on different boards/devices.
So, it needs to be customized by boards/devices
TEST=compile ok and check IC_SDA_HOLD is changed if the hold time
is defined in onboard.h
Original-Reviewed-on: https://chromium-review.googlesource.com/308623
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I66c799de400670916cebbcb529d4f59d5b0f081b
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/12740
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
src/soc/intel/skylake/acpi.c
Function cbmem_find may return NULL, check before using its result.
src/soc/intel/skylake/flash_controller.c
Remove dead code: spi_claim_bus is a no-op, always returning 0.
src/soc/intel/skylake/gpio.c
Check for NULL before using pointers.
src/soc/intel/skylake/igd.c
Don't copy 0-termination of signature string.
src/soc/intel/skylake/lpc.c
Don't check unsigned >= 0.
src/soc/intel/skylake/systemagent.c
Explicitly cast result to 64bit.
BRANCH=None
BUG=chrome-os-partner:48542
TEST=Built & booted Kunimitsu board.
Change-Id: I6cbf4f78382383d3c8c3b15f66c5898ab5bf183a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d98a8cdd3d095a6943c0e104cd4938639a62bd14
Original-Change-Id: Id2a31402618f4c9f6f53525ebcf6b71fd67428db
Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/317522
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12991
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
This patch added default values for two SAR properies
introduced by updated nau8825 codec driver. Also updated
sar-threshold to improve button detection accuracy.
Bug=chrome-os-partner:49394
BRANCH=glados
TEST=Build for kunimitsu. Tested with 4-button headset
Change-Id: I4096c60be54819d0ab2bf4b72a1e403f88d96af0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b747e9dffed1c51131f0028879d4c22283c8ec5
Original-Change-Id: I3e222ff58c1483e261acf1cea297164966bf8689
Original-Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Original-Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/322241
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13014
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Set "nuvoton,sar-threshold" property to thresholds
based on tuning with the Android Wired Headphone
Compatibility Kit and Chell EVT.
Also set properties nuvoton,sar-compare-time and
nuvoton,sar-sampling-time.
The values of compare and sampling time align with
the ones from this CL:
https://chromium-review.googlesource.com/306372
Signed-off-by: Benson Leung <bleung@chromium.org>
BUG=chrome-os-partner:49333
BRANCH=none
TEST=Run evtest, selecting the input event for sklnau8825adi
Using the Nominal headphones from the kit, check that the
buttons for "KEY_VOLUMEDOWN", "KEY_VOLUMEUP", "KEY_MEDIA",
and code 582 (?) (should be voice search, but evtest doesn't understand)
All of these buttons should work properly.
Change-Id: I43dc1957f7d95744f41039a306d323806e66c56a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2bb545500afeb5b4fa0d1cd02dbf6453f19901ab
Original-Change-Id: I126aae1e5ed1b9e1a2429e8c94fe08b3ba3ca736
Original-Reviewed-on: https://chromium-review.googlesource.com/322243
Original-Commit-Ready: Benson Leung <bleung@chromium.org>
Original-Tested-by: Benson Leung <bleung@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13013
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Modify Dqs Byte Swizzling for channel 0 to honor chell's memory routing
BUG=chrome-os-partner:48986
BRANCH=glados
TEST=verified on chell system
Signed-off-by: Mike Hsieh <mike.m.hsieh@intel.com>
Change-Id: Ic0485526bc1378e329c5eb0eeb57ff67a9501e86
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b60241e63381974655f5df5afcd913e95c17682b
Original-Change-Id: I641502e8d303fa59e0f668d581745379e1ef4853
Original-Reviewed-on: https://chromium-review.googlesource.com/321524
Original-Commit-Ready: Duncan Laurie <dlaurie@chromium.org>
Original-Tested-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13012
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
After comparing datasheets it appears to have the same geometry
and timings as the K4E6E304EE-EGCF part with just a new part number.
BUG=chrome-os-partner:49357
BRANCH=glados
TEST=build and boot on chell EVT (new part is not used until DVT)
Change-Id: Ia1e67080b1d79600e00c3ea8bee088ecafea2ab2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb1488ca5ff780b5f1f937dbf0d23610c28204b2
Original-Change-Id: I09e1ce1a45a217afc88f422cf7db7924fad6b6f9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/321956
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13011
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
As the audio card needs 1.8V I2C operation. This patch adds
entry into devicetree.cb to set I2C port 4 operate at 1.8V.
Branch=None
Bug=chrome-os-partner:47821
Test=Built & booted kunimitsu board. Verified that I2C
port 4 is operating at 1.8V level
CQ-DEPEND=CL:*242225, CL:*241206, CL:315167
Change-Id: Ida69b885737aef0cfcf6a6ca21b3650169e614d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 990df9c1c65e75aae0a1329ead3790e78021b804
Original-Change-Id: Ifbb65e3d83561b52cc18e48b89d146c2f88f289b
Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315168
Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13010
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- Enable serial irq configuration in FSP.
- Set minimum assertion width values for FSP to configure.
- Set I2C4 voltage to 1.8V.
- Enable SaGv feature to dynamically train memory frequency.
BUG=chrome-os-partner:47688
BRANCH=none
TEST=build and boot on chell EVT
Change-Id: If6955c9ee4f08d1ebc6e98e0ba0786073919856f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7403149299ec2c6c66c2066a5dd8294608e71409
Original-Change-Id: Ia182396ad4eb7a283e183fce7c50c98f6d2de57c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/321212
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13009
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|