| Age | Commit message (Collapse) | Author |
|---|
|
Allow the ability for chipset or mainboard to choose to
compress FSP-S in cbfs using LZMA or LZ4 routines. To accomplish
this fsp_load_component() is added as an assist for performing
the necessary logic and allow the caller to provide the destination
selection. Since the main cbfs decompression paths are utilized add
the appropriate checks for including compression algorithms under
the FSP-S compression options.
On picasso FSP-S (debug builds) the following savings were measured:
no-compression:
fsps.bin 327680 none
FSP_COMPRESS_FSP_S_LZ4:
fsps.bin 98339 LZ4 (327680 decompressed) -70%
FSP_COMPRESS_FSP_S_LZMA:
fsps.bin 71275 LZMA (327680 decompressed) -78%
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I8aa5d8c1cbaf4d08f38a918a9031a2570bc5247e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The LZ4 compressed stages assume in-place decompression. The constraints
are validated in cbfstool for _stages_ such that they can be decompressed
in place. However, that is only true for stages. As such, add a wrapper,
cbfs_stage_load_and_decompress(), that handles the LZ4 stage loading case.
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I9525a266250aa6c775283b598c09d4f40692db55
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41755
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
uuid.h uses uint8_t which is provided by stdint.h.
BUG=b:153675915
TEST=Fixed my compiler error.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idbec40f444d9df7587b9066faac65499415dae6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I858f870db0babcb51c594570e8136436ecbb0d1d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41823
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add strtok() and strtok_r() to the library.
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Change-Id: Ic855b31669be1c274cbf247c53ffa6f74ec5bf35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Builds where RESET_X86_VECTOR is adjusted would create unintentionally
large bootblock files since id section can move far away from .reset
and .text. Some builds segfault or may try to create close to 4 GB
large intermediate build objects.
For cases where build is successful, id section would not reside within
REGION(program) or REGION(bootblock).
A proper fix to always place the ID data at the end of the coreboot.rom
file is left as follow-up work. For now, just place id section below
.reset.
Change-Id: Idf0e4defcde6d5e264d4752cc93f4ffb6749d287
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The sections .rom.* were for romcc and no longer used.
Some romcc comments were left behind when guards were removed.
Change-Id: I060ad7af2f03c67946f9796e625c072b887280c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch will disable PAVP UPD, which is by default enabled in FSP.
BUG=b:155595624
BRANCH=None
TEST=Build, boot JSLRVP, Verified UPD values from FSP log
Change-Id: I8e103ad11ae6ffa6b9efe4bf249bbe344bc10a30
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41763
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current implementation returns the incorrect GPIO community PID.
The GPIO community index 3 should return PID for COMM_4 and index
4 should return PID for COMM_5.
TEST=Verify GPIO PM bits are correctly set through MS0x ACPI method.
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Change-Id: I3da4945e93605a297baff076295433164fdf613d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41721
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
So far, the semantics have been that run-unit-tests stopped at the first
test suite that failed. This hides useful signal in later tests, so
always run all tests and collect the result.
Change-Id: I407715f85513c2c95a1cf89cfb427317dff9fbab
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
They're not added as a dependency, even though that should be possible,
because we want the build tests to run even when the unit tests fail.
Change-Id: Ia3391d7b289160178fa773dfd7b7c51c6ef77805
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Iab0c4250b1baa77d4eab7538ec1fd3310f9e63e4
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
|
|
Put it in $(objutil) so that it's shared between board builds with
abuild even if that doesn't matter right now.
Change-Id: I5670d9b661891262ad936980f63fa93b07c27e95
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CB:34634 expanded the VPD code to also be usable from romstage,
shuffling a few things around and adding some extra infrastructure in
the process. Unfortunately, the changes seem to have only been written
with x86 devices in mind and make coreboot always load the whole VPD
FMAP section (not just the used part) on devices where rdev_mmap() is
not a no-op.
This patch rewrites the VPD code to be based on region_device structures
that only represent the VPD area actually used (rather than the whole
FMAP section), and that only get mapped when accessed. (It would be even
better to pull this concept into the VPD decoder itself, but since that
is taken from third-party code and accesses in early stages aren't very
common, let's not go there for now.) It also moves the copying into
CBMEM to romstage so that late romstage accesses can already benefit
from it, and makes early decoding available in all stages because at
this point, why not.
Also fix a long-standing bug where the 'consumed' counter was not reset
between vpd_decode_string() calls to the RO and the RW VPD.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I55a103180b290c1563e35a25496188b6a82e49ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Enable/Disable THCx though devicetree
BUG=None
BRANCH=None
TEST=Boot and check FSP log for THC setting
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: If7683969161be67f68f441c28c80503de39079b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41571
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change makes the following improvements to debug logging in
resource allocator:
1. Print depth is added to functions in pass 1 to better represent how
the resource requirements of child devices impact the resource windows
for parent bridge.
2. Device path is added to resource ranges to make it easier to
understand what device the resouce ranges are associated with.
3. Prints in pass 2 (update constraints, resource ranges, resource
assignment) are shifted left by 1 to make it easier to visualize
resource allocation for each bridge including domain.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3356a7278060e281d1a57d253537b097472827a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41478
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates the log level for prints in resource allocator v4
to BIOS_DEBUG instead of BIOS_SPEW. These are critical in debugging
issues and should be enabled at log level BIOS_DEBUG.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib863619f5e1214e4fe6f05c52be6fa2de36e6c3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41477
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ports""
This reverts commit 1726fa1f0ce474cde32e8b32be34a212aff3ffba.
Reason for revert: Resource allocator is split into old(v3) and
new(v4). So, this change to enable hotplug resource allocator for
volteer can land back.
BUG=b:149186922
Change-Id: Ib6a4df610b045fbc885c70bff3698a032b79f770
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
4G boundary""
This reverts commit e15f352039a371156ceef37f0434003228166e99.
Reason for revert: Resource allocator is split into old(v3) and
new(v4). So, this change to provide an option to allocate prefetch
memory above 4G boundary can be added back. Since the support for
allocating above 4G boundary is available only in resource allocator
v4, Kconfig option is accordingly updated to add depends on
RESOURCE_ALLOCATOR_V4.
Change-Id: I94e5866458c79c2719fd780f336fb5da71a7df66
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41467
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds back CB:39487 which was reverted as part of
CB:41412. Now that the resource allocator is split into old(v3) and
new(v4), this change adds support for allocating resources above 4G
boundary with the new allocator v4.
Original commit message:
This change adds support for allocating resources above the 4G
boundary by making use of memranges for resource windows enabled in
the previous CL.
It adds a new resource flag IORESOURCE_ABOVE_4G which is used in the
following ways:
a) Downstream device resources can set this flag to indicate that they
would like to have their resource allocation above the 4G
boundary. These semantics will have to be enabled in the drivers
managing the devices. It can also be extended to be enabled via
devicetree. This flag is automatically propagated by the resource
allocator from downstream devices to the upstream bridges in pass
1. It is done to ensure that the resource allocator has a global view
of downstream requirements during pass 2 at domain level.
b) Bridges have a single resource window for each of mem and prefmem
resource types. Thus, if any downstream resource of the bridge
requests allocation above 4G boundary, all the other downstream
resources of the same type under the bridge will be allocated above 4G
boundary.
c) During pass 2, resource allocator at domain level splits
IORESOURCE_MEM into two different memory ranges -- one for the window
below 4G and other above 4G. Resource allocation happens separately
for each of these windows.
d) At the bridge level, there is no extra logic required since the
resource will live entirely above or below the 4G boundary. Hence, all
downstream devices of any bridge will fall within the window allocated
to the bridge resource. To handle this case separately from that of
domain, initializing of memranges for a bridge is done differently
than the domain.
Limitation:
Resources of a given type at the bridge or downstream devices
cannot live both above and below 4G boundary. Thus, if a bridge has
some downstream resources requesting allocation for a given type above
4G boundary and other resources of the same type requesting allocation
below 4G boundary, then all these resources of the same type get
allocated above 4G boundary.
Change-Id: I92a5cf7cd1457f2f713e1ffd8ea31796ce3d0cce
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The templates for the zork reference boards are still being actively
worked on in the trembyle-bringup branch. Remove the zork template
from the main branch to avoid confusion when trembyle-bringup is
merged.
BUG=b:157099580
BRANCH=none
TEST=N/A
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Change-Id: I0ff9de959c7b2646b90e68df05f0b2e9bdd60cf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Current implementation returns the incorrect GPIO community PID.
The GPIO community index 3 should return PID for COMM_4 and index
4 should return PID for COMM_5.
TEST=Verify PCR port id is correct for each community.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I5dc48e5b31f43853b3a613c17f13f7df71f1fbfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41725
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6c69dcad82ee217ed4760dea1792dd1a6612cd8b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The majority of the codebase has been converted to use SPDX identifiers
now, so let's enforce those by default. The only exceptions are
src/include and src/lib, which are not being checked since many of the
files there do not have license headers at all. Files with custom
licenses that aren't covered by SPDX can be listed as exceptions at the
top of lint-000-license-headers.
Change-Id: Ie6642153793d5735c74c5950bc9e27ee7eecacbc
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41602
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the terrador variant of the volteer reference board
BUG=b:156435028
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_TERRADOR
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I088861d1f8b7b4ee8de1e5ab6c7d3109ffd0531b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
This feature is only available if properly hooked up to an
smihandler.
Change-Id: I99baef07b0623f9a6b41e8b8e000a89589c298d0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41730
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Avoid dereferencing a NULL pointer in case of function parameter 'ptr'.
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Change-Id: I5dba27d9757fb55476f3d5848f0ed26ae9494bee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Make the code follow the coding style.
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Change-Id: I4ca168c4aedddef51103b270f105feab93739ecc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This fixes ACPI errors below when invoking tlp-stat and allows setting
battery thresholds as natacpi is now enabled.
thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
Test: Fedora 32 [also on Fedora 31 before the upgrade] Kernel 5.6.12-300
Signed-off-by: Amit Caleechurn <acaleechurn@gmail.com>
Change-Id: Ie345cdd05e38a8b7f646f44d814446543baeed3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia56305e9554b666f8eaf590a91be84e5cac4c75c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41701
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If06695745bb72f883314e5514c616223b0210a2f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
|
|
Change-Id: Ie4f70429c516fff613d372fec7c1c955645f1c6d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
|
|
Change-Id: I1996c1b57310c4c0542c9ed47d1638ddd9c55680
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41713
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I31853e3ede786eb9e10704674e42dd56c3a48688
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
|
|
The declaration is autogenerated inside static.c file
from the pathname. The declaration here also lacked _skx_
part from the name.
Change-Id: I3adce9147e9376f6d73e410fdd4c0ee800178b58
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The declaration is autogenerated inside static.c file
from the pathname.
Change-Id: I6eda101a69522d6d526da7c174aa3085ca0fb221
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change drops rt8168 ethernet Kconfig options for baseboard hatch
since it does not really support an ethernet device.
Change-Id: I7c19dbeb2f64b0643b082a9c588f8b14db4dfb8a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41661
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
mb/google/hatch supports two different reference platforms - Hatch and
Puff. This change adds Kconfigs BOARD_GOOGLE_BASEBOARD_PUFF in
addition to BOARD_GOOGLE_BASEBOARD_HATCH to better organize the
Kconfig selections and reduce redundancy. In addition to this, a new
config BOARD_GOOGLE_HATCH_COMMON is added that selects all the common
configs for both baseboards.
TEST=Verified using abuild --timeless option that all hatch variants
generate the same coreboot.rom image with and without this change.
Change-Id: I46f8b2ed924c10228fa55e5168bf4fe6b41ec36c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41660
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are SX9310 devices present in devicetree.cb but the driver is
not enabled so it is not getting used.
Change-Id: I625233013a2e14eaf758e56027774fbf5df3bc83
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41700
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9ff49adebc1156d33c648efb8e9854b13c0ef859
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use CAPID0_A to provide information closer to reality.
* Correctly advertise ECC support, max DIMM count and max capacity
* CAPID0_A hasn't changed since SNB, but most EDS mark the bits as
reserved even though they are still used by FSP.
* Assume the same bits for Tiger Lake as for Ice Lake
* Assume the same bits for Skylake as for Coffee Lake
* Add CAPID0_A to Icelake headers
The lastest complete documentation can be found in Document: 341078-002.
Change-Id: I0d8fbb512fccbd99a6cfdacadc496d8266ae4cc7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Both fields are ignored if WBINVD is set, which is true for all
processors since i486.
Change-Id: Ibad56046e2c1b8595dc31e5861b9fd1fd7d2d6f3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Provide helper functions to determine if a compression
algorithm is supported in a given stage. Future patches can
use those functions to amend which algorithms to include in
the final link.
BUG=b:155322763,b:150746858,b:152909132
Change-Id: I898c939cec73d1f300ea38b165f379038877f05e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Our jenkins instance is also used for flashrom, which can be built with
meson, a mode that we want to be able to test, so add that.
ninja can be used as a backend to both meson and cmake (which coreboot
will use to build cmocka for its unit tests) and may provide some
additional coverage. Plus it's tiny but fast.
Change-Id: If454164852303144eaa72c4071c03ee89e863318
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Allow lockdown configuration from using CHIPSET_LOCKDOWN_COREBOOT
config.
TEST=Build and boot waddledoo board
Change-Id: I3abaa737580ef45b98cabfa23edd84162037dd70
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41534
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable Intel Speed Shift Technology (ISST) by default. Disable ISST in
waddledee and waddledoo variants on early phases.
BUG=b:151281860
TEST=Build and boot the mainboard. Ensure that cpufreq driver to
configure P-states is enabled in kernel on boards where board version is
provisioned.
Change-Id: Id65d7981501c2f282e564bfc140f8d499d5713e8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This is a copy of the mb/google/zork directory from the chromiumos
coreboot-zork branch. This was from commit 29308ac8606.
See https://chromium.googlesource.com/chromiumos/third_party/coreboot/+/29308ac8606/src/mainboard/google/zork
Changes:
* Minor changes to make the board build.
* Add bootblock.c.
* Modify romstage.c
* Removed the FSP_X configs from zork/Kconfig since they should be
set in picasso/Kconfig. picasso/Kconfig doesn't currently define the
binaries since they haven't been published. To get a working build
a custom config that sets FSP_X_FILE is required.
BUG=b:157140753
TEST=Build trembyle and boot to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3933fa54e3f603985a0818852a1c77d8e248484f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41581
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When waiting for the SMU to be ready to accept a new command, the time
spent waiting shouldn't be printed as command execution time. Also fix
the time unit in the print statement.
Change-Id: I6b97b11cd9efae7029779ee2096d4f2224cecd72
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This option appears twice in the devicetree. Drop one instance.
Change-Id: Ib8c93665048e8fa9fcff39ca5a015cea09ceaa03
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41753
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This option appears twice in the devicetree. Drop one instance.
Change-Id: I2121770688f64542a02c777d4175fe4739ebb28a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41752
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`fsp/util.h` draws incompatible UDK headers in. Hence, we have to
declare it locally again.
Change-Id: Iaa5981088eeb5c36f765d6332ae47a38a6a4c875
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40729
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0572dbbfb61e5e0129fe6a3a1b5894145d74fd0d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40728
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also fix wrong 32-bit writes.
Change-Id: Ib038f0cd558223536da08ba2264774db11cd8357
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40727
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The allocator should take care of this.
Change-Id: I4ec88ebe23b4dcab069f764decc8b9b0c6e6a142
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40726
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I359b529df44db7d63c5a7922cb1ebd8e130d0c43
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40725
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It never was in GNVS, it never belonged among the ACPI tables. Having
it in CBMEM, makes it easy to look the location up on resume, and saves
us additional boilerplate.
TEST=Booted Linux on Lenovo/X201s, confirmed ASLS is set and
intel_backlight + acpi_video synchronize, both before and
after suspend.
Change-Id: I5fdd6634e4a671a85b1df8bc9815296ff42edf29
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40724
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Send a message to the SMU to turn off the system power. SMU will take
the proper final steps based on PmControl[SlpTyp].
BUG=b:153264473
TEST=verify system can enter S3
Change-Id: I3c0d98110c12963aa6fef5d176fd9acaa7ed9f26
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/2140471
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41626
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new feature that allows messages to be sent to the SMU. The
offsets of the PCI config index/data indirect registers have been
documented for prior generation devices.
The index/data pair is used to access a command register, a response,
and six argument values.
BUG=b:153264473
TEST=Verify service can be used to take the system into S3
Change-Id: Ide431aa976cb2f8bdc248cb08aa0724a9596ac5a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://chromium-review.googlesource.com/2161796
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The code was written on a workstation that has python
pointing to python3.
BUG=b:157140753
TEST=Built trembyle and was able to boot to the OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I181d87aad1ffb10e12f8ffd7513318f6d6bcbc3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41739
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The APCB_magic.bin lives in amd_blobs, not blobs.
BUG=b:157140753
TEST=Boot trembyle to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib082a8e7fc631ca7145b0b77e49ea0cbf99dff41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41734
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Addressing comment from CB:41443 that was received after the change
landed. memranges_create_hole() takes size as the last parameter. So,
the I/O hole created at 0x3b0 needs to set size as 0x3df - 0x3b0 + 1
as 0x3df is the upper limit of that hole.
Change-Id: I08fca283436924427e12c6c69edced7e51db42a9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The PNP ID Means: PNP0F13 PS/2 Port for PS/2-style Mice
BUG=b:145575366
BRANCH=none
TEST=Verified mouse was initialized
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I2a4f071ad54730ea75f75ebf1633a4a08f7f2dd0
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2080664
Tested-by: Martin Roth <martinroth@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Commit-Queue: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41639
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apparently I missed adding this variable definition.
BUG=b:157140753
TEST=Build APCBs with clean tree :)
Fixes: cbaa835f211 ("soc/amd/picasso/Makefile: Use apcb_tool to generate APCBs from SPDs")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia9055ed3507996cbf78687a97599aab3b0b39d6f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41738
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:157140753
TEST=Built zork/trembyle and boot to OS.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I30a27a149ee7f368f45fdf5d4a081127f15e7629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ibe768ef7cd714c17fd5a296d9a3e5f963ae0ef01
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41641
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds proper RV2 silicon and Dali SKU detection using both CPUID
information and some bits from silicon_id in the Picasso misc data HOB
that FSP-M stores in memory.
BUG=b:153779573
Change-Id: I589be3bdac4b94785e6ecacf55235be4ad5673d9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The FSP-M/S headers added are generated as per FSP v2114.
Following UPDs are deprecated
- IedSize
- EnableC6Dram
Following UPDs are added
- TurboMode
- PavpEnable
- CnviMode
- CnviBtCore
- PchFivrExtV1p05RailEnabledStates
- PchFivrExtVnnRailSxEnabledStates
- PchFivrVccinAuxRetToLowCurModeVolTranTime
- PchFivrVccinAuxRetToHighCurModeVolTranTime
- PchFivrVccinAuxLowToHighCurModeVolTranTime
- PchLockDownGlobalSmi
- PchLockDownBiosInterface
- PchLockDownBiosLock
BUG=b:155054804
BRANCH=None
TEST=Build and boot JSLRVP
Cq-Depend: TBD
Change-Id: Id9355a1eccfbdc1e9a07b37cb3d8e3de125054d9
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
The Tiger Lake PMC device has a MUX device which is expected to be
exposed in ACPI tables. The MUX device simply has a _HID and _DDN.
The CON devices link the USB-2 and USB-3 port numbers (from SoC
point of view) to the physical connector. They also have orientation
options for the sideband (SBU) and USB High Speed signals (HSL),
meaning that they can be fixed (i.e, another device besides the SoC
controls the orientation, and effectively the SoC is following only
CC1 or CC2 orientation), or they can follow the CC lines.
BUG=b:151646486
TEST=Tested with next patch in series (see TEST line there)
Change-Id: I8b5f275907601960410459aa669e257b80ff3dc2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Relying on Cmocka packages, which are provided with different OS
distributions, may introduce some problems with setup environments
across developers (e.g. library version mismatch). Instead, let's build
Cmocka from source code, which is now added to git submodules as
3rdparty/cmocka.
Please note, that cmake tool is required for building Cmocka (thus also
coreboot unit tests).
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: Ia947c5c60d5c58b76acebe4b614dd427ef995950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Cmocka unit testing framework is used for writing and building coreboot
unit tests. This repo will be checked-in only when building some test
targets.
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I3cdfd32f5bba795d5834ebeae1afff0f7006a0d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Match the path generated by AGESA. Add more PPKG packages.
TEST=Verify that "\_PR.C00n" AE_NOT_FOUND errors go away
BUG=b:145013057
Change-Id: I82587648d37c0be885991f2e5741d9f874d6a2eb
Signed-off-by: Marshall Dawson <marshall.dawson@amd.corp-partner.google.com>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1937788
Reviewed-by: Martin Roth <martinroth@chromium.org>
Commit-Queue: Martin Roth <martinroth@chromium.org>
Tested-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change enables max98390 audio codec on nightfury.
BUG=b:149443429
BRANCH=firmware-hatch-12672.B
TEST=Built and checked audio function on nightfury
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Ic9678583370cf5e41c87e35ba12f86572708fada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Additional verb changes are needed for Headset and Mic detection to
work properly.
BUG=b:155360937
TEST=Headset and Mic detection is working in the UI audio tray
Change-Id: I184a05949f5522e929969156b72629be3d957e3f
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41642
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert spaces to tabs in volteer variant makefiles, and remove empty
comment lines from file headers.
BUG=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and verify
volteer boots to kernel.
Change-Id: I6c818c3adcc55ce89707efff6dd9a6bce512daa5
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41587
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change disables the old resource allocator by default and instead
uses the new v4 resource allocator. Only the chipsets that explicitly
select RESOURCE_ALLOCATOR_V3 will continue to use the old v3 resource
allocator.
Change-Id: I2ab9f1d612b5f193f058011a18b1d6373e09f788
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
This change adds legacy VGA memory (0xa0000 - 0xbffff) as
mmio_resource in northbridge.c read_resources() to match what is
exposed to the OS in hostbridge.asl. It ensures that the resource
allocator does not use this range for dynamic resource allocation.
Change-Id: I24e3aaf97202575fa9df8408366c8db5bea07145
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This change selects the old resource allocator RESOURCE_ALLOCATOR_V3
for northbridge/amd chipsets. This is required until the chipsets can
be fixed to report the resource requirements correctly before resource
allocator runs. Issues identified in the chipset code are captured in
the mailing list thread here:
https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/QWLUXO3V5IR5AS6ARRI722BFVAPOD5TS
Change-Id: Iaf873ee76a67482483e410aede653dd8f662e468
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
This change adds back support for the resource allocator using
multiple ranges as originally landed in CB:39486(commit hash 3b02006)
and reverted in CB:41413(commit hash 6186cbc). The new resource
allocator can be selected by Kconfig option RESOURCE_ALLOCATOR_V4. It
was identified that there are some AMD chipsets in the tree that do
not really work well with the dynamic resource allocation. Until these
chipsets are fixed, old (v3) and new (v4) of the resource allocator
need to live side-by-side in the tree. There were some other chipsets
in the tree which originally demonstrated problems with the new
resource allocator, but have been since fixed in the tree.
This change picks up the same additions as performed in CB:39486 along
with the following changes:
1. Changes to avoid fixed resources in the entire tree. Use of
search_bus_resources() is replaced with a walk of the entire tree
in avoid_fixed_resources(). This is required to ensure that all fixed
resources added to any device (including domain) are taken into
consideration to avoid overlap during dynamic resource allocation.
2. Changes to set up alignment for memranges when initializing
them. This is done to ensure that the right granularity is used for
IORESOURCE_IO(no special alignment) and IORESOURCE_MEM(4KiB) resource
requests.
3. mark_resource_invalid() is dropped as the resource no longer needs
to be marked in any special way if allocation is not being
done. Instead setting of IORESOURCE_ASSIGNED flag is skipped in this
case.
4. initialize_memranges() is updated to check IORESOURCE_ASSIGNED
instead of base == limit.
Original commit message:
This change updates the resource allocator in coreboot to allow using
multiple ranges for resource allocation rather than restricting
available window to a single base/limit pair. This is done in
preparation to allow 64-bit resource allocation.
Following changes are made as part of this:
a) Resource allocator still makes 2 passes at the entire tree. The
first pass is to gather the resource requirements of each device
under each domain. It walks recursively in DFS fashion to gather the
requirements of the leaf devices and propagates this back up to the
downstream bridges of the domain. Domain is special in the sense that
it has fixed resource ranges. Hence, the resource requirements from
the downstream devices have no effect on the domain resource
windows. This results in domain resource limits being unmodified after
the first pass.
b) Once the requirements for all the devices under the domain are
gathered, resource allocator walks a second time to allocate resources
to downstream devices as per the requirements. Here, instead of
maintaining a single window for allocating resources, it creates a
list of memranges starting with the resource window at domain and then
applying constraints to create holes for any fixed resources. This
ensures that there is no overlap with fixed resources under the
domain.
c) Domain does not differentiate between mem and prefmem. Since they
are allocated space from the same resource window at the domain level,
it considers all resource requests from downstream devices of the
domain independent of the prefetch type.
d) Once resource allocation is done at the domain level, resource
allocator walks down the downstream bridges and continues the same
process until it reaches the leaves. Bridges have separate windows for
mem and prefmem. Hence, unlike domain, the resource allocator at
bridge level ensures that downstream requirements are satisfied by
taking prefetch type into consideration.
e) This whole 2-pass process is performed for every domain in the
system under the assumption that domains do not have overlapping
address spaces.
Noticeable differences from previous resource allocator:
a) Changes in print logs observed due to flows being slightly
different.
b) Base, limit and size of domain resources are no longer updated
based on downstream requirements.
c) Memranges are used instead of a single base/limit pair for
determining resource allocation.
d) Previously, if a resource request did not fit in the available
base/limit window, then the resource would be allocated over DRAM or
any other address space defeating the principle of "no overlap". With
this change, any time a resource cannot fit in the available ranges,
it complains and ensures that the resource is effectively disabled by
setting base same as the limit.
e) Resource allocator no longer looks at multiple links to determine
the right bus for a resource. None of the current boards have multiple
buses under any downstream device of the domain. The only device with
multiple links seems to be the cpu cluster device for some AMD
platforms.
Change-Id: Ide4d98528197bb03850a8fb4d73c41cd2c0195aa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41443
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
find_pci_tolm() is updated to ensure that it ignores resources that
have a zero size. This change removes the setting of resource flags to
IORESOURCE_ASSIGNED when the resource is not really allocated any
space by the allocator. It also drops the setting of base to limit
since that is not required anymore.
Change-Id: If8c0d4bf1aa9cd6a5bdf056140f65cf2d70ed216
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41566
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change moves the resource allocator functions out of device.c
and into two separate files:
1. resource_allocator_v3.c: This is the old implementation of
resource allocator that uses a single window for resource
allocation. It is required to support some AMD chipsets that do not
provide an accurate map of allocated resources by the time the
allocator runs. They work fine with the old allocator since it
restricts itself to allocations in a single window at the top of the
4G space.
2. resource_allocator_common.c: This file contains the functions that can
be shared by the old and new resource allocator.
Entry point into the resource allocation is allocate_resources() which
can be implemented by both old and new allocators. This change also
adds a Kconfig option RESOURCE_ALLOCATOR_V3 which enables the old
resource allocator. This config option is enabled by default
currently, but in the following CLs this will be enabled only for the
broken boards.
Reason for this split: Both the old and new resource allocators need
to be retained in the tree until the broken chipsets are fixed.
Change-Id: I2f5440cf83c6e9e15a5f22e79cc3c66aa2cec4c0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41442
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
find_pci_tolm()
This change updates find_pci_tolm() to not consider any unassigned
resources. This is achieved by adding the following checks:
1. Call search_bus_resources() with mask set to IORESOURCE_MEM |
IORESOURCE_ASSIGNED.
2. In the callback tolm_test, check that the new resource selected has
a non-zero size.
This change is being made so that the resource allocator does not have
to set the IORESOURCE_ASSIGNED flag for marking a resource as
invalid.
Change-Id: I796784dd93aa165e20a672c985b4875991901c87
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The I/O windows of PCI bridges can be disabled individually by
setting their limit lower than their base. Always do this if a
resource wasn't assigned a value.
Change-Id: I73f6817c4b12cb1689627044735d1fed6d825afe
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This function is too long and quirky. Factor the actual resource write
out, so we can focus on the logic.
Change-Id: I6c7f930614dcd63d4ee2a4ca7cf541a9de4fd557
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Select UDK_2017_BINDING instead of UDK_2015_BIDING. Otherwise
there is build error when turning on FSP debugging.
Remove duplicate configs from SKX-SP and CPX-SP directories, to
keep the configs at SoC family level.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I6b25bf25dcb57937e2d9fec54eeb7951b0ee4b2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Change-Id: Ide6516937ea79c35cd54127ed2823352a1cac6d4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie27054ded47b91a27036b5b4a21ab69b387239dc
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I7c7fb10308a6fcd1ead292c53ed03ddc693f6f15
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In Tiger Lake we have support for enabling MIPI clocks at runtime in
ACPI. Hence remove setting pch_islclk from devcietree and chip.h.
Also update functions which reference pch_isclk.
BUG=b:148884060
Branch=None
Test=build and boot volteer and verify camera functionality
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I6b3399172c43b4afa4267873ddd8ccf8d417ca16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41570
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Delete below configuration
- Heci3Enabled: deprecated,
see https://review.coreboot.org/cgit/coreboot.git/tree/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h#n442
- PchIshEnable: don't need as it's handled by devicetree dev on/off,
see https://review.coreboot.org/cgit/coreboot.git/tree/src/soc/intel/tigerlake/romstage/fsp_params.c#n87
BUG:b:151166877
BRANCH=none
TEST=Build and boot to OS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: If96cc7db7118dd6c2ac02aab3bb0c96763ffc722
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
It's already disabled by FSP default but disable VMD by devicetree
to remove dependency with FSP default setting.
BUG=None
Branch=None
Test=Build TGLRVP and boot up and check FSP log for checking VMD is
disabled.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ief81fe481b94abed9754881cf1f454999fafa52e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41061
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some SoC specific hobs are of HOB_TYPE_GUID_EXTENSION.
Call SoC specific soc_display_hob() to display the content as necessary.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ib4e4abe2d89b04504d1988d8d3c2fde268b5345a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Update processor power limit configuration parameters based on
common code base support for Intel Apollo Lake SoC based platforms.
BRANCH=None
BUG=None
TEST=Built and tested on octopus system
Change-Id: I609744d165a53c8f91e42a67da1b972de00076a5
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41233
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates vboot submodule from commit hash 3aab301:
vboot: Convert reboot-related errors to vboot2-style
to commit hash c531000:
vboot: Add recovery reason code for CSE Lite SKU errors
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ifbf5a09e6602c3f6833e6e8fbbd3cee3f60f1b47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This explicitly enables both of TCSS D3HotEnable and D3ColdEnable
from Volteer devicetree.cb setting.
BUG=:b:146624360
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I1a168ad87169c0f6633704c55c9293aa25710188
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This explicitly enables both of TCSS D3HotEnable and D3ColdEnable
from tglrvp devicetree.cb setting.
BUG=:b:146624360
TEST=Built and booted on tglrvp.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I3b77fe15bd67e513f193f704030a98241e058437
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This adds FSP UPD D3HotEnable and D3ColdEnable for configuration.
D3Hot low power mode support is for TCSS xhci, xdci, TBT PCIe root
ports and DMA controllers. D3Cold is lower mode for TBT PCIe root
ports and DMA controllers with D3Hot->D3Cold transition.
BUG=:b:146624360
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I6782cde6a1bfe13f46e75db8c85537c6d62f5d41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
BUG=b:147249494,b:147249494
BRANCH=None
TEST=boot up mushu
check cbmem -1 to make sure PCIe 1d.4 is enabled
Change-Id: I36404217f0ecffb0cce1105e76f507c9062df053
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=b:156990317
TEST=emerge-volteer coreboot chromeos-bootimage
Boot to kernel and check the ELAN trackpad can wake up unit from suspend.
Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com>
Change-Id: If4bea8a9742f7533be2e51b855cc39ca77d73608
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I2d0c90afe8acf8405da2cb6444e47dc98ad8cc9b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
After removal of CAR_MIGRATION there are no more reasons
to carry around ENV_STAGE_HAS_BSS_SECTION=n case.
Replace 'MAYBE_STATIC_BSS' with 'static' and remove explicit
zero-initializers.
Change-Id: I14dd9f52da5b06f0116bd97496cf794e5e71bc37
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
