| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Iff19ae495fb9c0795dae4b2844dc8e0220a57b2c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Configure GPIO DGI_D4 (AP_XHCI_INIT_DONE) as output, so that payloads
(for example depthcharge) can assert it to notify EC to enable USB VBUS.
BUG=b:193499785
TEST=emerge-cherry coreboot
BRANCH=none
Change-Id: I21b7b811b8138cb3f71efecb0a0a886905c65a9c
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The patch adds an interface for configuring GPIOs inside the Kontron
CPLD/EC. This allows to statically define the mode for each GPIO pin
in devicetree.cb of the motherboard or carrier board. For example:
chip ec/kontron/kempld
device gpio 0 on
register "gpio[0]" = "KEMPLD_GPIO_INPUT"
register "gpio[4]" = "KEMPLD_GPIO_OUTPUT_LOW"
register "gpio[5]" = "KEMPLD_GPIO_OUTPUT_HIGH"
register "gpio[11]" = "KEMPLD_GPIO_DEFAULT"
end
end
In this case, <device gpio 0>, like all other devices, is not a real
device inside the EC. These definitions are used to understand the EC
resources and systematize configuration options, but if mark this as
<off>, the initialization step will be skipped in the driver code.
Use KEMPLD_GPIO_DEFAULT or skip it in devicetree.cb to not configure
the GPIO and keep the default mode after CPLD reset.
This work is based on code from the drivers/gpio/gpio-kempld.c linux
driver. Tested on Kontron mAL-10 COMe module [1].
[1] CB:54380 , Change-Id: I7d354aa32ac8c64f54b2bcbdb4f1b8915f55264e
Change-Id: Id767aa451fbf2ca1c0dccfc9aa2c024c6f37c1bb
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47595
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In hardwaremain.c we call console_init before threads_initialize. Part
of setting up the uart requires calling udelay which then calls
thread_yield_microseconds. Since threads have not been set up, trying to
yield will result in bad things happening. This change guards the thread
methods by making current_thread return NULL if the structures have not
been initialized.
BUG=b:179699789
TEST=Ramstage no longer hangs with serial enabled
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If9e1eedfaebe584901d2937c8aa24e158706fa43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56318
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This leverages the existing Collaborative Processor Performance Control
(CPPC) support and adds CPPC init for AMD/Cezanne.
BUG=b:185814875
TEST=under Linux/ChromeOS, acpidump ssdt2, find expected CPPC entries
Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com>
Change-Id: I94172f40c7fa4b7b89237fd382448e598da00fbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Also move the registers in the order they are in the hardware.
Change-Id: If018e746e58c14475caeda76feb8b5281d7732f1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56315
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only when ACPI_BERT is selected the BERT functionality needs to be
included in the build.
Change-Id: I8a21562f4535fb0ea3c53f2ea8df50f66cc6a64c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56314
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since we don't need to skip the MCA check on cold boot on MCAX capable
systems, add a mca_skip_check implementation that always returns false.
Change-Id: Id8fc4b6f02b6c02b03172fe11f0451a9893e514d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This will allow moving mca_check_all_banks to mca_common.c.
Change-Id: I58e100c1447907bab984a2fdff6c6e0181910c23
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This aligns the mca_check_all_banks implementation in the common mca.c
with the one in the common mcax.c file. Do the MCA bank count check
before the !is_warm_reset() check, so that a mismatch also gets printed
on the cold boot path.
Change-Id: Idbd3e9ce9c7483f84f87adab7adac47335cd59aa
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since those functions are implemented and used only inside the common
MCA(X) code, there's no need to have them in the header file that gets
included in the SoC-specific code.
Change-Id: Ia84e149d67ac7d80de595379c73a6cf08730719d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For Cezanne stubs are added for the functions that the SoC-specific code
needs to provide. Since the mca_is_valid_bank stub on Cezanne always
returns false, the checks get skipped for it at the moment. The actual
functionality will be added in a later patch.
Change-Id: Ic31e9b1ca7f8fac0721c95935c79150d7f774aa4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To factor out the rest of the common MCAX code, mca_bank_name[] may only
be accessed by accessor functions, so implement this for the last place
that still accessed mca_bank_name[] directly.
Change-Id: Ic6548d3ceeb9c00ad344fc0bb3d97893e17a43a9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56294
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I03365c3820cbe7277f14adc5460e892fb8d9b7a5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56284
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I960a2f384f11e4aa5aa2eb0645b6046f9f2f8847
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56283
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alder Lake SoC has virtual GPIOs for community 1 which was being
programmed by FSP and hence was skipped by coreboot. As part of
moving most of the GPIO programming to coreboot, we're skipping this
programming in FSP now.
TEST=Check register offset to see if programming is correct.
Change-Id: I4d48553d14465df50e5aaaf27ab26c6a1b70d4cf
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55270
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Fast Read Dual Output and Fast Read Dual I/O commands are
practically identical, the only difference being how the read address is
transferred (saving a whooping 2 bytes which is totally irrelevant for
the amounts of data coreboot tends to read). We originally implemented
Fast Read Dual Output since it's the older command and some older
Winbond chips only supported that one... but it seems that some older
Macronix parts for whatever reason chose to only support Fast Read Dual
I/O instead. So in order to make this work for as many parts as
possible, I guess we'll have to implement both. (Also, the Macronix
device ID situation is utter madness with different chips with different
capabilities often having the same ID, so we basically have to make a
best-effort guess to strike a trade-off between fast speeds and best
chance at supporting all chips. If this turns out to be a problem later,
we may have to add Kconfig overrides for this or resort to SFDP parsing,
although that would defeat the whole point of trying to be fast.)
BUG=b:193486682
TEST=Booted CoachZ (with Dual I/O)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia1a20581f251615127f132eadea367b7b66c4709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
We may want to use that flash vendor on future variants.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2c0fa87fd3f8de8f928e5f41eae2a78204597b5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Define a structure for opregion version information to align
with spec/kernel.
BUG=b:190019970
BRANCH=None
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I93a9f2df186002a4e38caa910f867bce0b97ac2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable FSP Crashlog UPDs if SA_DEVFN_TMT is enabled and
SOC_INTEL_CRASHLOG is selected by the SoC user.
Change-Id: Ibcd0259da86c8d9853e6cc4983675ac97df46c2d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56299
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable FSP Crashlog UPDs if SA_DEVFN_TMT is enabled and
SOC_INTEL_CRASHLOG is selected by the SoC user.
Change-Id: I0244e2a3f9c000a5c6ecdade1419aa47f51b1e80
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56298
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable tcss_xdci as it is not used.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I94102240b13d2b96e0295f41bc2b0ba078faf342
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
To be able to enable & disable PSP_verstage in the saved .config file,
the symbol VBOOT_STARTS_BEFORE_BOOTBLOCK needs to be changed from a
select to a default with a prompt.
BUG=182477057
TEST=Build, get PSP_verstage, disable VBOOT_STARTS_BEFORE_BOOTBLOCK,
verify that VBOOT_STARTS_IN_BOOTBLOCK is set.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Iba735f33f9b079c9868ef2fff099c5298ff72b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56289
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initially APL was considered as IFDv2 platform irrespective being
added into ifd_2_platforms[], hence commit hash 621ed4c had migrated
APL into IFDv1 which break its FLMSTR1/FLMSTR2/FLMSTR3 Read/Write
access. This change adds APL into the list of IFDv2 platforms to fix
booting issue on the LeafHill board.
Change-Id: Ied59ddb2fe05b421266a6b119fd6eab17b8beedc
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56300
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rick Lee <rick.lee@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I67a88298c19657a5049ab69799be887555ca7240
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I139d1fe41bad5213da8890c2867f275b6847e3e1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56281
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will allow factoring out and moving check_mca() to soc/amd/common.
Change-Id: I92c7657baef17c248a5aef1eda268e9647502837
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56280
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia489dbfba59c334cf29f96a4000cef73b9b797d4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56279
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch changes the way how the not implemented MCA bank 3 gets
skipped. For the not implemented bank 3 the name gets set to NULL
resulting in mca_is_valid_bank returning false causing the bank to get
skipped. This is a preparation for commonizing the MCA(X) handing in the
soc/amd sub-tree.
Change-Id: I40d6a6752504d804c45b445fce7e763e80161211
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I42abff5efcd7c85d2932a7aaacc736d0376cfaa0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
In mca_check_all_banks only check valid MCA banks for errors. This
aligns the Picasso code a bit more with the Stoneyridge code base which
will be updated in a follow-up patch. This is a preparation for
commonizing the MCA(X) handing in the soc/amd sub-tree.
Change-Id: I0c7f3066afd220e6b8bf8308a321189d7a2679f6
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56275
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The length of mca_bank_name should match the return value of
mca_get_bank_count which gets the number of MCA banks from an MSR.
TEST=No error message on serial console on amd/mandolin
Change-Id: Ibdad51a7ef27266e110dfbb43188361952618342
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56274
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also use array indices for the initialization.
TEST=Checked with the public Picasso PPR #55570-B1 Rev 3.16
Change-Id: I10a65210da73e64b67d613609fcc0f9a245a81fb
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56273
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Do not dereference a pointer before checking whether it is NULL.
Change-Id: Icbe9ae99d91fd587d8e56cf3a0dcb59834ee6d07
Found-by: Coverity CID 1458232
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56266
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A regular assignment works just as well and also allows type-checking.
It also avoids a common mistake where `sizeof` is applied to a pointer
to obtain the size of the data it points to, without dereferencing it.
Found-by: Coverity CID 1458231
Change-Id: I7ed05322c3c911f3da4145f81e4d9760a275fec2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56265
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 0fc87e31e0b9ad15dd199fe96189a2ade6abf240.
Reason for revert: Breaks psp_verstage in guybrush
BUG=b:182477057
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ie50cba4aaf31425ef8fee848c098a826f55c98da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56131
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id640fd8006c47ce1db8a8729407c1c9a9c1e79c3
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56272
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ifbcad4d81fb9f6c359a870be73b05ed86441e7f0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56271
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ESPI & LPC keywords were added for the zork program, but it was
found that they weren't needed, so they were never used. The previous
patch removes them from sconfig, so now they aren't needed in coreboot.
BUG=None
TEST=Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I9ae7817bb63d69ee272103b2d1186f125e188950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56278
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ESPI & LPC keywords were added for the zork program, but it was
found that they weren't needed, so they were never used.
BUG=None
TEST=Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I3a78afc55477d62eac8056e2ca4bcdd3ab12ea47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56197
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the AMD FCH architects, we should be using the default
value for the NO_HOG bit. This fixes a problem where the SPI DMA no
longer functions after the LPC init runs.
BUG=b:179699789, b:192373221
TEST=Boot guybrush and see SPI DMA working
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If015869657f36d3533f4ab9ebd1f54b0d4eb283a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
There is no technical reason this needs to be done in romstage. Moving
it into ramstage allow us (in future CLs) to use threads to pre-load
the apob from SPI.
BUG=b:179699789
TEST=Boot and Ezkinil and Guybrush and verify APOB update still work
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I960437ff4400645de5a3e7447fcdbc52de85943e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:179699789
TEST=Able to compile with the rest of the patch train.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9e3cfb55e48737c378bde53ae0e5d7cbf5e41bc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The %p format specifier already prints out 0x, so remove the 0x from the
string. I also updated the other format specifiers to use the %# syntax
to print out the 0x.
BUG=b:179699789
TEST=see correct format.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5b00d2c06687e549f69486eb5e18f7bed560b2ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56225
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently the MCA support for Cezanne only clears the MCA status
registers. The MCA error handling and BERT table generation will be
added in subsequent patches.
Change-Id: Ib9b5174186c28c8c82f57ffd8936c8dad4e63c5b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add this macro to be able to conveniently access the MC_CTL_MASK
register for each MCA bank. Also drop the unused definitions for
MC1_CTL_MASK and MC4_CTL_MASK.
Change-Id: I23ce1eac2ffce35a2b45387ee86aa77b52da5494
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This MSR isn't an architectural MSR, so it shouldn't be in the common
x86 MSR definition header file. From family 17h on this register has
moved to a different location.
Change-Id: Id11d942876da217034e6f912b1058f00bd15c22c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since we can use both the old MCA registers and the new MCAX registers
to access the MCA status registers, we can use the common
mca_clear_status function here.
Change-Id: I9ddcc119eca2659361b1496fd7ffe124fb323d26
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I53413b4051b79d7c2f24b1191ce877155e654400
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56259
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In multiple locations within the coreboot tree all available
IA32_MC_STATUS registers are cleared, so add this to the common code to
avoid duplication of code.
Change-Id: I04af23c16021b0ce90f7105f7a3856bd26ffa736
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56258
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I972c70773d4d928e75098efbf78f174d7c3ebf50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: Ic34f29d1692b94284b2cf6c5d91d323df736c76f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56204
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Building nvramcui with i386-elf-gcc (coreboot toolchain
v2021-04-06_7014f8258e) 8.3.0 and Link Time Optimization (LTO) enabled
in libpayload (`CONFIG_LP_LTO=y`) fails with the error below.
LPGCC nvramcui.bin
curses/PDCurses/pdcurses/refresh.c: In function 'wrefresh':
curses/pdcurses-backend/pdcdisp.c:217:4: error: 'bg' may be used uninitialized in this function [-Werror=maybe-uninitialized]
curses/pdcurses-backend/pdcdisp.c:214:18: note: 'bg' was declared here
curses/pdcurses-backend/pdcdisp.c:217:4: error: 'fg' may be used uninitialized in this function [-Werror=maybe-uninitialized]
curses/pdcurses-backend/pdcdisp.c:214:14: note: 'fg' was declared here
lto1: all warnings being treated as errors
lto-wrapper: fatal error: i386-elf-gcc returned 1 exit status
compilation terminated.
/opt/xgcc/lib/gcc/i386-elf/8.3.0/../../../../i386-elf/bin/ld.bfd: error: lto-wrapper failed
collect2: error: ld returned 1 exit status
`pair_content()` returns in case `PAIR_NUMBER(attr)` is invalid, so
guard the usage of `serial_set_color()`.
if (pair < 0 || pair >= COLOR_PAIRS || !fg || !bg)
return ERR;
Note, building with x86_64-linux-gnu-gcc-10 (Debian 10.2.1-6) 10.2.1
20210110 does *not* fail.
Change-Id: Ic63e34f2b5bc9f826db37597bebc6b20542481d7
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This CL adds support for new ADL graphics Device ID 0x46a6.
TEST=Build and boot Adlrvp board
Change-Id: I8ca875c7faf2997d207aff9e292f94a3b6311e94
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56026
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch replaces the usage of GPR (General Purpose Registers) like
ECX and EBX for backing up data way and non-eviction mask with SPR
(Special Purpose Registers) EDI and ESI.
Purpose of this change is to ensure the safety while developers might
use ECX often while doing rdmsr/wrmsr rather than making use of EDI.
TEST=Able to boot JSL and TGL platform without any hang using eNEM.
Change-Id: I12e0cb7bb050e4f7b17ecf30108db335d1d82ab7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56161
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This devicetree option is never set and never used. Drop it.
Change-Id: I9cd4733746849728b2b9f85793eace9191a97f49
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Rename `Rmt` to `RMT` for consistency with the UPD name.
Change-Id: I905b9b65fa6c5711c6e726cc09d3cad5ba3640a1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
SaGv is only available on ULT/ULX processors, which use PCH-LP. Given
that the Siemens Chili board selects `SOC_INTEL_CANNONLAKE_PCH_H`, it
does not use ULT/ULX processors, and thus does not support SaGv. Drop
the `SaGv` setting from the devicetrees, as it has no effect.
Change-Id: I5be518cce08206ad149efd1665e44a7111b24202
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56205
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This project is already implemented and therefore should not be
mentioned anymore as a new project idea in the documentation.
Change-Id: I38c6e274e416b98485943d36536a57a14743945b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When `HAVE_IFD_BIN` is not enabled, do not show IFD-related options.
Change-Id: I8736f32b4c695efbd68adf551e1376726c718b56
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use the common mca_get_bank_count function instead of open-coding the
functionality to get the MCA bank number. Also re-type the num_banks
variable from signed in to unsigned int, since the number of MCA bank is
always positive, and make it constant.
Change-Id: I449c74629ff16057c4559d7fd3620208230560f5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56245
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the common mca_get_bank_count function instead of open-coding the
functionality to get the MCA bank number. Also re-type the num_banks
variable from signed in to unsigned int, since the number of MCA bank is
always positive, and make it constant.
In the case of Intel model 2065x the mca_get_bank_count() call replaces
a magic number.
Change-Id: I245b15f57e77edca179e9e28965383a227617174
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56244
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When accessing the MCA MSRs, the MCA bank number gets multiplied by 4
and added to the IA32_MC0_* define to get the MSR number. Add a macro
that already does this calculation to avoid open coding this repeatedly.
Change-Id: I2de753b8c8ac8dcff5a94d5bba43aa13bbf94b99
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56243
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id0cf8269d1b695e05c55f33af92978b8244090fa
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56242
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5496fd27f5c56d35ab95a5e02ea313b5b5536668
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56241
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id7a716a2598a6a7bea2d2d56898ea6329b5a3bec
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56240
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7cd05a389c34c2e5f3d0ab4cd06d60a7e3e5cad9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56239
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib31075fd615eaa8492ce0179b3b21317554f1c80
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56238
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only the fields bank and sts from the mca_bank struct were used outside
a local scope, so remove the rest. Also rename the struct that now only
contains the bank number and the status MSR content to mca_bank_status.
Change-Id: I925347dff950ac2bd021635ca988c02fba48df7f
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56237
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I23aa4d36d4e6d4c7ed66800c2e7963c4ed03c393
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56236
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Those registers are architectural MSR and this also gets them in line
with IA32_MC0_CTL and IA32_MC0_STATUS. Also move them below the
definitions for IA32_MC0_STATUS, so that the numbers of the MSRs are
ascending.
Change-Id: Icef6526c896720248f5b648ddf1a271bdf46917c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56235
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since initial_lapicid() returns an unsigned int, change the type of the
local variables the return value gets assigned to to unsigned int as
well if applicable. Also change the printk format strings for printing
the variable's contents to %u where it was %d before.
Change-Id: I289015b81b2a9d915c4cab9b0544fc19b85df7a3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55063
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was originally several commits that had to be squashed into one
because the intermediate states weren't able to build coreboot:
- one to remove everything that wasn't our own code, leaving only
regex.[ch], toada.c, description.md and Makefile.inc.
- one to copy in Linux 5.13's scripts/kconfig and adapt Makefile.inc
to make the original Makefile work again.
- adapt abuild to use olddefconfig, simplifying matters.
- apply patches in util/kconfig/patches.
- Some more adaptations to the libpayload build system.
The patches are now in util/kconfig/patches/, reverse applying them
should lead to a util/kconfig/ tree that contains exactly the Linux
version + our own 5 files.
Change-Id: Ia0e8fe4e9022b278f34ab113a433ef4d45e5c355
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
I a file in configs/* has no suffix, then the default configuration
will override the results of the build generated by the configfile
from configs/*. Fix this by adding a '_' to the buildname.
Change-Id: Ic47105fafca41f1905a6569943079623bec5405a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Clean up lockdown configuration and move it to the baseboard's
devicetree.
Since most of the mainboards use `CHIPSET_LOCKDOWN_COREBOOT`, use it
for the rvp8 variant for consistency as well.
Built intel/rvp11 with `BUILD_TIMELESS=1` and coreboot.rom remains
identical. intel/rvp8 changes, as expected.
Change-Id: I78e847c321c61c3a974b26f30bc2823ff84df651
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56212
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4b5e0992494949bcb2fbda1361e0118c087a437a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56211
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The headers added are generated as per FSP v2237_00.
Previous FSP version was v2207_01.
Changes Include:
- Add VccInAuxImonIccImax in FspsUpd.h
- Adjust Reserved UPD Offset in FspmUpd.h and FspsUpd.h
- Few UPDs description update in FspmUpd.h and FspsUpd.h
BUG=b:192199787
BRANCH=None
TEST=Build and boot brya
Change-Id: Ie291204a3fa0b9451c418c84bd40a17ef08a436c
Cq-Depend:chrome-internal:3970327,chrome-internal:3925290
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55896
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The coreboot SMBus driver requires additional changes to accomodate
the DDR5 EEPROM read which has resulted in a broken code flow for boot.
This CL serves as a temp WA to let FSP perform the SPD read for DDR5
and pass SPD addresses to FSP UPD array.
BUG=b:180458099
TEST=Build and boot DDR5 adlrvp to OS
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I9998bfcd12b81c11fcc9f791da2a27d3c788e48a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50996
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some devices were missing from the IRQ table, and this lack of
IRQ programming for the devices (although unused), was causing S0ix
entry to fail.
BUG=b:176858827
TEST=suspend_stress_test -c10 passes, EC observes SLP_S0IX# toggle
correctly upon entry/exit from S0ix
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia7612ee008842ba2b8dcd36deb201f4f26130660
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
Currently, internal flashing is not possible due to FSP lockdown. Thus
let coreboot do chipset lockdown.
Change-Id: Iee4f6986e5edfe1bf6c84fe132bcb47b15bb81f5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56198
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: I10b2d3c6cb3480f9e3e3232b5ce87ecf7074bbbf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Use the common mca_get_bank_count function instead of open-coding the
functionality to get the MCA bank number.
Change-Id: I28244c975ee34d36d0b44df092d4a62a01c3c79c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This reverts commit ce0e2a014009390c4527e064efb59260ef4d3a3b which was
originally introduced as a workaround for the bug that the Linux kernel
doesn't know what to do with type 16 memory region in the e820 table
where CBMEM resides and disallowed accessing it. After depthcharge was
patched to mark the type 16 region as a normal reserved region, the
Linux kernel now can access the BERT region and print BERT errors. When
SeaBIOS was used as payload it already marked the memory region
correctly, so it already worked in that case.
After commit 8c3a8df1021b8a2789c2a285557401837f9fc2b8 that removed the
usage of the BERT memory region reserved by the FSP driver by the AMD
Picasso and Cezanne SoCs and made them use CBMEM for the BERT region,
no other SoC code uses this functionality. The Intel Alderlake and
Tigerlake SoCs put the BERT region in CBMEM and never used this reserved
memory region and the change for the Intel server CPU to use this was
abandoned and never landed in upstream coreboot. AMD Stoneyridge is the
only other SoC/chipset that selects ACPI_BERT, but since it doesn't
select or use the FSP driver, it also won't be affected by this change.
TEST=Behavior of the BERT code doesn't change on Mandolin
Change-Id: I6ca095ca327cbf925edb59b89fff42ff9f96de5d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56163
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MCG_CTL_P is bit 8 of the IA32_MCG_CAP MSR and not bit 3. Bits 0-7 of
that MSR contain the number of MCA banks being present on the CPU. At
the moment this definition of MCG_CTL_P is unused.
Change-Id: I39a59083daa5c2db11a8074d5c4881bf55688f43
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
msr_t and a few other things used in here are defined in cpu/x86/msr.h,
so include it directly in this file.
Change-Id: I7a3299381ff54b7665620861dec60642f27bac8d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Use the common mca_get_bank_count function instead of open-coding the
functionality to get the MCA bank number. Also re-type the num_banks
variable from signed in to unsigned int, since the number of MCA bank is
always positive.
Change-Id: I126767cf9ad468cab6d6537dd73e9b2dc377b5c4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
If two generic devices use the same number, device coming later
overrides the earlier device, as a result of this the static.c has
only one device.
In the case where we have UFC set to UFC_USB, this will result in
no IPU device scope in SSDT, since its entry will be set to disbled
after UFC probe.
TEST=Build, Boot and Check UFC camera preview with UFC=UFC_USB
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I034cb7da787313d1cb53484922149589ac0f1c5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use the common mca_get_bank_count function instead of open-coding the
functionality to get the MCA bank number. Also re-type the num_banks
variable from signed in to unsigned int, since the number of MCA bank is
always positive.
Change-Id: I70ad423aab484cf4ec8f51b43624cd434647aad4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
In multiple locations within the coreboot tree the IA32_MCG_CAP MSR gets
read and masked with MCA_BANKS_MASK to get the number of available MCA
banks on the CPU, so add this to the common code to avoid duplication
of code.
Change-Id: Id118a900edbe1f67aabcd109d2654c167b6345ea
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This change only enables the IOMMU device. We still require the IVRS
table to take advantage of the IOMMU. This will happen when the picasso
IVRS code is moved into common.
BUG=b:190515051
TEST=lspci shows IOMMU device
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1631
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5c7cae3d25af5a45d48658ffa948a2856adc4346
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The new function is called acpigen_write_if_cond_refof(), and it must
be paired with a following acpigen_write_if_end() call.
Change-Id: I6e192a569f550ecb77ad264275d52f219eacaca1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It’s defined as `unsigned char`.
SB800: sb_Before_Pci_Init
shift out of bounds src/vendorcode/amd/cimx/sb800/SBCMN.c:643:53
ubsan: unrecoverable error.
Found-by: UBSAN
Change-Id: I0c5fa16bce5b68ed3b48bb17eae6d81af894b688
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
SB800: sb_Before_Pci_Init
shift out of bounds src/vendorcode/amd/cimx/sb800/Gpp.c:151:61
ubsan: unrecoverable error.
Found-by: UBSAN
Change-Id: I6cbef2fa9806fd6da67031ca01bb25205013b478
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51285
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
SB800: sb_Before_Pci_Init
shift out of bounds src/vendorcode/amd/cimx/sb800/SBCMN.c:486:57
ubsan: unrecoverable error.
Found-by: UBSAN
Change-Id: Id05b96f1f4cf4a1cf8283db22e10ab8df833406d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51286
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, we get PLD information from USB port structure itself, so
devicetree does not need to fill PLD structure anymore. Thus remove
obsolete variable.
Change-Id: I7a561677ab65ddb870d1b00b35ee9d7a22ef9c70
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
We need to reference correct USB port number for driver to
identify type-C port number correctly.
BUG=b:189476816
BRANCH=None
TEST=Check the transactions are happening on correct port. Also checked
retimer firmware update on both the ports.
Change-Id: I20c088ee81610155067abad086eba8d72f73ad60
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Since TBT controller can have maximum 2 ports per controller, our
code will loop over DFP structure twice and determine port number.
Retimer driver used to assign port number as below:
1. Check if power GPIO is assigned for particular DFP entry or not
2. If entry is there, assign loop count as port number
Since loop count is 2, retimer will never assign port number = 2
even if it's present. In case of more than 1 controller, port number
assigned will still be 0 or 1 even though actual port index might
be 2 or 3. This will create an issue where even if you do transaction
on device on controller 2 (port index 2 or 3), EC will route it on
port 0 or 1 due to incorrect port index.
Update the driver flow as per below to handle this scenario:
1. Check if power GPIO is assigned for particular DFP entry or not
2. Get USB port number from config since it's stored in usb port
information under devicetree
3. Pass the port number to ACPI SSDT and EC code
Above changes will ensure that we're assigning correct port
number as per calculation and EC will use correct port index.
BUG=b:189476816
BRANCH=None
TEST=Checked that retimer firmware update works on both ports and update
happens on correct port index.
Change-Id: Ib11637ae39046e0afdacd33bc34e8a59e6f2bfb1
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create a separate function to get PLD information from USB device.
This is helpful in retimer driver where we can attach same USB
port information to retimer instance and we can avoid duplication
of information.
BUG=None
BRANCH=None
TEST=Check if code compiles and function returns correct value
Change-Id: Iaaf140ce1965dce3a812aa2701ce0e29b34ab3e7
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Introduce a new board 'Munna' to Kukui family.
BUG=None
TEST=make # select Munna
BRANCH=kukui
Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com>
Change-Id: Ie53750d0b79fe6d7c6e7778ba4616b557708601d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56169
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch increases PRERAM_CBMEM_CONSOLE_SIZE from 5KB to 8KB to fix
cbmem buffer overflow issue.
Test=Boot ADLRVP and check cbmem -c | grep 'CBFS: Found'
lists all stages.
Change-Id: I38fd74c2edd71ce9f6c08db9dacb18e553745877
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
