Age | Commit message (Collapse) | Author |
|
Use the Kconfig switch PCI_ALLOW_BUS_MASTER_ANY_DEVICE instead of
PCI_ALLOW_BUS_MASTER to enable PCIe bus master bit as requested in
CB:56441 during review.
Change-Id: I433dbae0d9b15e41d1d0750298868341ce3d6b46
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Set the bus master bit only if the global Kconfig switch
PCI_ALLOW_BUS_MASTER_ANY_DEVICE is enabled. For now the bus master bit
is needed for i210 because of some old OS drivers that do not set it
and won't work properly without it.
Change-Id: I6f727e7f513f4320740fbf49e741cea86edb3247
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add a new configuration option with more density for
8GB variants of the up squared board.
Settings are taken from slimbootloader.
Signed-off-by: Florian Laufenböck <florian@laufenbock.de>
Change-Id: I217b04be94e913b75e2bac0a4ae1c43f2411a044
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This legacy alt-century byte sits amidst CMOS and conflicts many option
tables. It usually has no meaning to the hardware and needs to be main-
tained manually. Let's disable its usage by default if the CMOS option
table is enabled.
Change-Id: Ifba3d77120c2474393ac5e64faac1baeeb58c893
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Chrome EC is relatively quick with retiring "old" boards from their
tree so when upreving it, the last veyron in that list that wasn't
commented out is gone as well.
Change-Id: Ie1ef693c8d0947396ee01e5aa5f40ef36c8a317a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56430
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When accessing I2C, we should use the official names (I2Cx)
instead of magic numbers.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I17cc4c87f5ad26deeb5e529d1c106b697a53591b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56504
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EC_IN_RW_OD signal is routed from Google Security Chip to GPIO_91 in the
upcoming hardware build. The existing SD_EX_PRSNT signal is dropped in
the upcoming hardware build because SD7 support is dropped. Export the
EC_IN_RW GPIO for use by payload.
BUG=None
TEST=Build and boot to OS in Guybrush. Ensure that the device can boot
successfully in both recovery and normal mode.
Cq-Depend: chromium:3043702
Change-Id: I8986ba007a2d899c510be61664d90430b8d2d384
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56493
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update proper number of sectors info for winbond W25Q512NW-IM chip
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Change-Id: I12a22321bb9180e32cd47faa6ac3960ba5b2dfb8
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56038
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since this mainboard does not use GSPI at all, disable all GSPI ports.
Change-Id: I60254e9f4047537d86c972151ec9e33552332959
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This mainboard uses I2C1 and I2C4 buses only. Disable all the others as
they are not connected at all.
Change-Id: I4743f6ea6b9a9987ad63b60f56ee9a597a08284b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Features like DevSLP and Aggressive Link Power Management are not
supported on this mainboard and are therefore disabled.
Change-Id: I3bc650ea78be8587889fb7abfe7075cd9a122198
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
While the gcc(1) driver has the `-nostartfiles` option, ld(1), the
program the coreboot toolchain uses to link the object files, doesn't
have it.
In binutils before 2.36, this option is interpreted as `-n -o
startfiles`, in which the `-o` option is overridden by a later `-o`
option, so only the `-n` option has effect, which is the `--nmagic`
long option of ld(1). So the correct linker option in this place is
`--nmagic`.
It is tested that without `--nmagic`, ld can generate a much bigger
x86_64 romstage, so this option is still needed.
This error is found when trying to update binutils to 2.36 and later
versions, where ld(1) is unable to disambiguate options and reports an
error.
Change-Id: I27dc2209abdc6fec866716a252736c5cf236a347
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add wifi sar for cret.
BUG=b:194163601
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: Ic2f3dbc5822c1f4b1c935c87295ba9916e0e359e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This board does not use CLKREQ-signaling for PCIe, so disable the pin
assignments. In addition only three clock outputs are used for PCIe,
therefore disable all others to improve EMI.
Change-Id: I545f890fa55a109df7f44d2c82170874fb769009
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56455
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are in total three USB ports that are used on mc_ehl1:
- Port 1: Type A connector connected to USB2/USB3 port 0
- Port 2: Type A connector connected to USB2/USB3 port 1
- Onboard: connected to USB2 port 2
None of the ports supports overcurrent reporting.
Adjust the appropriate UPDs in devicetree to match the hardware
configuration.
Change-Id: I220637b8e9f03efccacd0955e82cfc0c7a6f53ee
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56454
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since mc_ehl1 does not have a display attached nor have a display
connector available (pure headless design), remove display related
settings from the devicetree.
Change-Id: Id31c09fcfba15f55eed19134bd0c2fb887bd2478
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56453
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update initial gpio configuration for redrix
BUG=b:192052098
TEST=FW_NAME=redrix emerge-brya coreboot
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I2294fb3bdba832677038cfe24b5014014c7f03e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56428
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Change-Id: Ic6c70f917a59e233f6ea518d9c39f73fe84991c3
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47284
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Without this configuration, even though there is no SD card it shows as
SD card is present and host controller waits for card to respond.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board with SD card and
without SD card, make sure if SD card not present then host controller
should not wait for card to respond.
Change-Id: I5dc5ba10c98d606d98e7d4f4c41c3e4f45e94452
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
The common gpio driver can be re-used for SC7180,
thus remove the existing gpio driver support and
also clean up the common macro definitions.
Add GPIO pin details specific to SC7180 chipset
for the consumers to be able to request for the
gpio functionality as per their requirement.
TEST=Validated on qualcomm sc7180 development board
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Change-Id: Ifd206e6bc9a549706e7a2c4bde0b7d5527ca6268
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This enables the MCAX checking and BERT entry generation for Cezanne.
TEST=When printing all registers of all MCAX banks of core 0 on a
google/guybrush device, the registers have values that look correctly
and there is no general protection fault, so all MCAX MSRs that could be
accessed exist on Cezanne.
BUG=b:192997706
Change-Id: Ibe8047ce5bb5e7136a8786693bcced4d2225b1fd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56345
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Move M2_SSD_PLN_L to GPP_D3 for power loss notify function.
2. Set GPP_E21 as NC to remove LCLW_DET function
BUG=b:190643562
Signed-off-by: Ariel Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: Id3c60adeb5d35c79a1c700937f93a80ad3587c5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56420
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable RSA and SHA for cezanne since support has been added to the PSP.
Also picasso and cezanne have different enums definitions for
hash algorithm, so split that out into chipset.c.
BUG=b:187906425
TEST=boot guybrush, check cbmem -t and the logs
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I725b0cac801ac0429f362a83aa58a8b9de158550
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This allows keeping track of how long it takes to load the microcode.
BUG=b:179699789
TEST=Boot guybrush
112:started reading uCode 990,448 (10,615)
113:finished reading uCode 991,722 (1,274)
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I86b67cf9d17786a380e90130a8fe424734e64657
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use the gpio offset macro instead of a constant value.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Change-Id: Ia9e4b9ca7216092665f0a06ce467da01963c2364
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Program unused Cnvi BT UART GPIOs as NC since we are using
Bluetooth over USB mode for Brya.
Change-Id: I33a37ceb8a91603d2a193de5bdd1b6885eb3c319
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55317
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the taeko variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:193685558
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TAEKO
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: If738849bc3103c52a4c4d8a8aaef3f90a62ad5c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56385
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
K4U6E3S4AA-MGCR
Add SPD support to gimble for LPDDR4 memory part MT53E1G32D2NP-046 WT:A and K4U6E3S4AA-MGCR.
BUG=b:191574298
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I4bfc18fd42c6ff2675e6f836c2ecc9617fac3aff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56329
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Take Kconfig switch PCI_ALLOW_BUS_MASTER into account and set the PCI
bus master bit for legacy devices only if it is allowed.
Change-Id: I7798a767d528419bb093f301140ab68cc8b9c5ae
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch adds support for variant specific soc chip config update
function.
Change-Id: Ic3a3ae0b409433e6dfa102c5e7a6322d4f78f730
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch makes Ampton EC wake up AP from s0ix when the state of
charge drops to 2%.
Demonstrated as follows:
1. Boot Ampton.
2. Run powerd_dbus_suspend.
3. On EC, run battfake 2.
4. System resumes.
BUG=b:189540432
BRANCH=Octopus
TEST=Verified on Ampton.
Change-Id: I98d8e6ea185e8782ad675d4668678b341ca5d350
Signed-off-by: James Chao <james_chao@asus.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56341
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The dependency file, generated by
$(HOSTCC) ... -MMD -MT $@ -c $< -o $@.orig
is determined by replacing the suffix of "$@.orig" with ".d", resulting
in "$@.d" (which is *.o.d). The file name was accidentally changed in
CB:55360. Now explicitly specify the path by the "-MF" option.
BUG=none
TEST=make unit-tests; find build/tests/ -name "*.d"
BRANCH=none
Change-Id: I01f77ebaaae78dd9e69394a49e524f1013857195
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
This change adds mem_parts_uesd.txt that contains the new
memory parts used by primus and Makefile.inc generated by
gen_part_id.go using mem_parts_used.txt.
BUG=b:193813079
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I6aa37114f3a164a4f3c35dfc9b43e1106b825bff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:186264627
BRANCH=none
TEST=build herobrine
Signed-off-by: Philip Chen <philipchen@google.com>
Change-Id: Id3faf7af64c0129ec646a01085adc43b561225d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
As part of GPIO driver cleanup across qcom chipsets,
GPIO_OUTPUT_ENABLE has been renamed to GPIO_OUTPUT.
BUG=b:182963902
TEST=Validated on qualcomm sc7180 development board
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Change-Id: I51eedc722a91c5ea8e009fb8468a60667d374b49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Defining a macro for the gpio offset instead of a constant value.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Change-Id: Iefdde8f8331cf1df2e88a2c8915aefb4fa091d65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
For new MT8195 devices we will control mt6360 via EC,
so we have to add ec function of controlling MT6360 and
add CONFIG to separate them.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic2228f5b45173f0905ea66a3a1f00ec820e0f855
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
TEST=boot kernel from sd card pass on Cherry board.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic20a2f3f053130ded202cf5ec861450f0f18eed0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56437
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch sets the optimized FIVR configs for ehlcrb customized
based on the performance measurements to achieve the better power
savings in sleep states.
- Enable the external V1p05, Vnn, VnnSx rails in S0i3, S3, S4, S5
states.
- Update the supported voltage states.
- Update max supported current, voltage transition time and RFI
spread spectrum.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: I1e30ff6d84bfe078fcce0f968fce6aaab7fd575b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55981
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add MTK_REGULATOR_VCC and MTK_REGULATOR_VCCQ for regulator.c.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Iedb1036da3c87106157c51cc46b52545faba102c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56436
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the new definition of mt6360_regulator_id,
merge the MT6360 LDO and PMIC interfaces into one.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I7ccc32cb0a9481d5f55349c152267a44fe09d20a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
On MT8195 platforms with BC1.2, we have to use EC to control
MT6360 so the mt6360_regulator_id is redefined to match the
numbers defined in EC driver.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I9437edb9776442759ce04c31d315c3760078ffb3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56434
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Add configurability using FW_CONFIG field in CBI, to
enable/disable I2S codec support for MAX98373 codecs
- AUDIO=ADL_MAX98373_ALC5682I_I2S: enable max98373 codec
using expansion board
Bug=None
Test=With CBI FW_CONFIG set to 0x100, check I2S audio output
on expansion card
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: If2649647e58c5f30e2b539d534adf2a4e68f4fda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52221
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit f7f715dff38c4a629139b2493ed6e0d7cc2eb36f.
Reason for revert: FSP 2207.01 uses the UsbTcPortEn UPD for TCSS XHCI enable
BUG=b:184324979
TEST=boot brya, all 3 USB Type-C ports still enumerate devices
Change-Id: I82bae21d185247bc0f3580fd6f92abb8eece6732
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56132
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Truthy conditions are easier to reason about.
BUG=none
TEST=Boot guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I229c3e90f5122d6191b28f9b4b6de79ac2fcb627
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
No reason to use the preprocessor for this.
BUG=none
TEST=build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I920dfa2d27c2eb27e8bc50c615ccd13601610fd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
These methods are oprom specific. Move them out of CBFS. I also deleted
the tohex methods and replaced them with snprintf.
BUG=b:179699789
TEST=Boot guybrush and see oprom still loads
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I03791f19c93fabfe62d9ecd4f9b4fad0e6a6146e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
New version of kconfig requires trailing slash at the end of
KCONFIG_SPLITCONFIG to indicate that it is a directory path.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I1a11eca21c4aa5a6260006c4ba2cb419eca8a802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As per the EDS revision 1.3 add support for I2C6 and I2C7.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Id918d55e48b91993af9de8381995917aef55edc9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55996
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6eb0881ab05730b094caef2a9258c4d4d827195b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I4726ba4f19807adf872aaf04764cc19492febd59
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Since the variants can have different memory move the SPD related
content to the variant directory.
Change-Id: I38aa5e7514437bfcc61c38d64f0ba6f19350810d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56036
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify PENH device GPIO GPP_E17 for pen ejection event.
BUG=b:192511670,b:193093749
BRANCH=firmware-volteer-13672.B
TEST=test pen insert and remove by evtest , SW_PEN_INSERT value 1 when insert pen to pen slot. SW_PEN_INSERT value 0 when remove pen from pen slot.
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ida5e5b35464471a7896cef392e178a3d2c0ea1aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Replace audio codec from DA7219 to Realtek ALC5682.
Add Realtek ALC5682 support.
BUG=b:185972050
BRANCH=master
TEST=check on treeya system ALC5682 audio codec is working normally.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I49c673fd944b2c2a79c4283eee941a16596ba7fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: I411f4f2c237a9e2d39038ee30f2957698ee053bd
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
If we don't escape the $ then the actual $(obj) path will be written
into the .config file. With this change `$(obj)` is written into the
.config file. The Makefile then does:
PSP_VERSTAGE_FILE=$(call strip_quotes,$(CONFIG_PSP_VERSTAGE_FILE))
Since this is a recursive assignment the $(obj) will be expanded at that
point.
This change makes it easier to compare full .config files.
BUG=none
TEST=Build ezkinil
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic961df148d3f22585f3441d75c3f2454329c678a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This change allows preloading the payload.
BUG=b:179699789
TEST=Boot guybrush and see payload read/decompress drop by 20 ms. We
now spend 7ms decompression from RAM. By switching to LZ4 we drop that
to 500us.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3ec78e628f24f2ba0c9fcf2a9e3bde64687eec44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
FILO allows to configure a line to autoboot. Hook this up into
coreboot’s build system.
TEST=Configure coreboot for QEMU i440fx with FILO as payload and
configure:
CONFIG_FILO_MASTER=y
CONFIG_FILO_USE_AUTOBOOT=y
CONFIG_FILO_AUTOBOOT_FILE="hda1:/vmlinuz root=/dev/sda1 console=tty0 console=ttyS0,115200 initrd=hda1:/initrd.img"
CONFIG_FILO_AUTOBOOT_DELAY=5
Boot Debian image with:
qemu-system-x86_64 -bios /dev/shm/coreboot/build/coreboot.rom -L /dev/shm -enable-kvm -smp cpus=2 -m 1G -hda /dev/shm/debian-32.img -serial stdio -net nic -net user,hostfwd=tcp::22222-:22
Change-Id: Id167e9a144bf466da87469108002672b299b702a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Rename PMC_EPOC to SOC_INTEL_COMMON_BLOCK_PMC_EPOC to maintain
common naming convention.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: If8a264007bbb85a44bbdfa72115eb687c32ec36e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This method will allow the SoC code to start loading the payload before
it is required.
BUG=b:177909625
TEST=Boot guybrush and see read/decompress drop by 23 ms.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifa8f30a0f4f931ece803c2e8e022e4d33d3fe581
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This enables COOP_MULTITASKING (i.e., multiple stacks single CPU). This
will allow the APOB to start loading while FSP-S executes.
BUG=b:179699789
TEST=Boot guybrush and verify APOB read timestamp has dropped from 10ms
to a few uS.
Starting APOB preload
APOB thread running
spi_dma_readat_dma: start: dest: 0xcb7aa640, offset: 0x0, size: 65536
took 0 us to acquire mutex
start_spi_dma_transaction: dest: 0xcb7aa640, offset: 0x0, remaining: 65536
<ramstage doing work>
spi_dma_readat_dma: end: dest: 0xcb7aa640, offset: 0x0, size: 65536, remaining: 0
<more work..>
waiting for thread
took 0 us
APOB valid copy is already in flash
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4b5c1ef4cad571d1cbca33b1aff017a3cedc1bea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56234
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This CL adds a method that can start the processes of reading the APOB
from SPI. It does require more RAM in ramstage since we no longer mmap
the buffer in the happy path. This will allow us to reduce our
boot time by ~10ms. The SoC code will need to be updated to call
start_apob_cache_read at a point where it makes sense.
BUG=b:179699789
TEST=With this and the patches above I can see a 10 ms reduction in
boot time on guybrush.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I930d58b76eb4558bc4f48ed928c4d6538fefb1e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56232
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Using fmap_locate_area is discouraged.
BUG=b:179699789
TEST=Boot guybrush and verify APOB got updated, then reboot and verify
APOB was valid.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7f58eace8adb4b7ddaf9047d9b8153405d3941a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56390
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will cause a linker error if these methods are used outside
ramstage.
BUG=b:179699789
TEST=compile guybrush w/ and w/o COOP_MULTITASKING
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If9983fca939c8a15fa570481bfe016a388458830
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56352
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are no more callers.
BUG=b:179699789
TEST=Compile guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I522f17c0e450641c0a60496ba07800da7e39889c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56389
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If a thread wants to block a state transition it can use
thread_run_until. Otherwise just let the thread run. `thread_join` can
be used to block on the thread. Boot states are also a ramstage concept.
If we want to use this API in any other stage, we need a way of starting
a thread without talking about stages.
BUG=b:179699789
TEST=verify thread_run no longer blocks the current state
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3e5b0aed70385ddcd23ffcf7b063f8ccb547fc05
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56351
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The thread_handle can be used to wait for a thread to exit. I also added
a return value to the thread function that will be stored on the handle
after it completes. This makes it easy for the callers to check if the
thread completed successfully or had an error. The thread_join
method uses the handle to block until the thread completes.
BUG=b:179699789
TEST=See thread_handle state update and see error code set correctly.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie6f64d0c5a5acad4431a605f0b0b5100dc5358ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56229
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no telling when the next udelay will be, so explicitly call
`thread_yield()` after completing a transaction. This will allow any
pending transactions to immediately start.
BUG=b:179699789
TEST=Verify new transaction is enqueued right after another.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9c1272bde46c3e0c15305b76c2ea7a6dde5ed0b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56321
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Once we enable COOP_MULTITASKING, we need to guarantee that we don't
have multiple threads trying to access the DMA hardware.
BUG=b:179699789
TEST=Boot guybrush with APOB patches.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibb8e31c95d6722521425772f4210af45626c8e09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56231
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We need a way to protect shared resources. Since we are using
cooperative multitasking the mutex implementation is pretty trivial.
BUG=b:179699789
TEST=Verify thread lock and unlock.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ife1ac95ec064ebcdd00fcaacec37a06ac52885ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56230
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switching threads while holding a spinlock can lead to a deadlock. This
happens if you have two thread trying to print to the serial console
because the uart code uses udelay.
BUG=b:179699789
TEST=Boot guybrush and no longer see a deadlock when printing to
console from a second thread.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1b929070b7f175965d4f37be693462fef26be052
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Renaming them to thread_coop_disable()/thread_coop_enable() makes them
sound like a pair.
BUG=b:179699789
TEST=Boot guybrush to OS
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1d70c18965f53e733e871ca03107270612efa4fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56357
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change allows nesting critical sections, and frees the caller from
having to keep track of whether the thread has coop enabled.
BUG=b:179699789
TEST=Boot guybrush with SPI DMA
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I325ab6181b17c5c084ca1e2c181b4df235020557
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56350
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
idle_thread_init was actually configuring the BSP thread at the end.
We can instead do this in threads_initialize. This now lets us set
initialized after the idle thread has been set up.
BUG=b:179699789
TEST=Boot guybrush to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7f1d6afac3b0622612565b37c61fbd2cd2481552
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56356
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This helper method is just a shorthand for
`thread_yield_microseconds(0)`. I think it makes it clear that we want
to yield a thread without delaying.
BUG=b:179699789
TEST=build test
Suggested-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id8b60c35b183cff6871d7ba70b36eb33b136c735
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56349
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change will make it so the standard rdev readat call will use the
SPI DMA controller if the alignment is correct, and the transfer size is
larger than 64 bytes.
There is a magic bit that needs to be set for the SPI DMA controller to
function correctly. This is only available in RN/CZN+.
BUG=b:179699789
TEST=Boot guybrush to OS. This reduces loading verstage by 40ms,
verifying RW by 500us and loading romstage by 500 us.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0be555956581fd82bbe1482d8afa8828c61aaa01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Also rename the existing PCI_DEVICE_ID_ATI_FAM19H_MODEL51H_GPU
definition to PCI_DEVICE_ID_ATI_FAM19H_MODEL51H_GPU_CEZANNE to clarify
that that is the one for Cezanne.
BUG=b:193888172
Change-Id: I1c5446c1517f2e0cd708d3275b08d2bce4be0ea8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56396
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Barcelo uses the same VBIOS image as Cezanne, but uses a different PCI
ID, so we need to implement map_oprom_vendev for the SoC.
BUG=b:193888172
Change-Id: I2eed43705f497245bd953659844b3fb461aa0b3b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56392
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alder Lake supports IGD Opregion version 2.1.
BUG=b:190019970
BRANCH=None
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I95a6f3df185003a4e38faa920f867ace0b97ab2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
List of changes:
1. Define new configs for Opregion versions.
2. Assign RVDA to relative address of the Opregion buffer
in case of opregion 2.1+.
BUG=b:190019970
BRANCH=None
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I95a9f3df185002a4e38faa910f867ace0b97ac2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Elkhart Lake provides option to configure FIVR (Fully Integrated
Voltage Regulators) via parameters in FSP-S.
This CL removes fixed FIVR config values and expose these parameters
to the devicetree so that they can be configured on mainboard level
as needed.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Ie1b0e0cc908ba69805dec7682100dfccb3b9d8b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib672ba8ed418b1a76e4a48951eabda6923358e7a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55581
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ram_id:1000 for memory part MT40A1G16RC-062E:B.
BUG=b:193732051
TEST=Generate new spd file and build coreboot.
Then boot from the DUT with new memory MT40A1G16RC-062E:B
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I07c69f628da7871b990c91af4a8244430b4d96a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56328
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch updates PMC Descriptor which is part of Descriptor Region if
system equipped with Alder lake A0 silicon. This change allows to use
unified Descriptor Region for Alder lake A0(CPU ID:0x906a0) and B0
(CPUD ID:0x906a1) silicons. The change has to be reverted before EOM is
enableda on the system.
BUG=B:187431859
TEST=Verified PMC Descriptor getting modified for Alder lake B0 silicon
if not updated.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I2a1f60fda7575212bb694fc423bd229452515903
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
It only leads to missing symbol errors.
Change-Id: Idbce93232ba2b54561abab5b2747c418d6efa92b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8621a38214686b359ee0e7cdf7e92154af3cbc81
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56381
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: I129f169e5dc394a11d8f7b07486cca4894dbec8e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: Ieb8063116bee59f6f6bf1f6b0b2349ce22bd67bd
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: Iefc19bc81125f422b8d4fc2f4af60622e7d28c0f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: I00ebb9a124eb3b8b893c2b176e14773c05851c18
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: I97f4d9715f3205678acca8fcdfb1a62714dfaa53
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: I2123a081baaf6fd254fe81d64eaeee1e3248dd34
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56371
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: I773114a703d62bf469aa74b128c697cc0924cc3d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated
cpu_ids.h file in SoC directory.
Change-Id: Ib62ad6a5381d346011fbc838dcd64b095fccd67b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch removes all local `CPUID_` macros from SoC directories and
creates a common cpu_ids.h inside include/cpu/intel/cpu_ids.h. SoC
users are expected to add any new CPUID support into cpu_ids.h and
include 'cpu/intel/cpu_ids.h' into respective files that look for
`CPUID_` macro.
Note: CPUIDs for HSW, BDW and Quark are still inside the respective
directory.
Change-Id: Id88e038c5d8b1ae077c822554582410de6f4a7ca
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch removes leading zero from CPUIDs as below:
0x05065a -> 0x5065a
0x05065b -> 0x5065b
Change-Id: I240a06e3b3d7e3dc080f9a9ed1539fadc982495d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
The setting `chipset_lockdown` has the same configuration for all
variants and they also match with the baseboard configuration. Thus,
remove it from the variant overridetrees.
Built google/delbin with `BUILD_TIMELESS=1` and coreboot.rom
remains the same.
Change-Id: I597e4487e7a0e1848d2a2f2c8f8ebd552994aac2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56199
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The configuration of the setting `chipset_lockdown` doesn't have any
effect for most of the variants since their configuration of
`common_soc_config` overwrites the configuration of the baseboard's
devicetree. If `chipset_lockdown` is configured separately in the
baseboard devicetree, the variant overridetrees reuse its
configuration.
Thus, move `chipset_lockdown` out of `common_soc_config` in the
baseboard devicetree and configure it separately.
Change-Id: I595c042cf62680d61f60965710d382bfdcd81671
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56209
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Before the part number for all boards was "Grunt". This patch adds the
correct part number/name for all variants.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If506df0b1027fb09f5027d8b9653b776fe3bdc75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55681
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Redefine GPIO_EC_IN_RW to GPP_F17
BUG=b:193091165
BRANCH=firmware-volteer-13672.B
TEST=verify FAFT firmware_DevMode Pass
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I24f4803dc99ef3fc78852241f3a9e86ec70293d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|