summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-11-11mb/google/var/riven: Optimize the stop delay for touchsreenKapil Porwal
Reduce stop delay for touchscreen based on the latest spec (EKTH6915 Product Spec_V1.0). This will optimize the touch response time to keep the S0ix resume time under 500ms. BUG=b:378012214 TEST=Verify improvement in resume time on Riven. Change-Id: Id7dcbc393bfae9bb62b5700bb9042a543152e968 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85039 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-11soc/mediatek/mt8196: Increase bootblock size from 70KB to 75KBJarried Lin
Increase the bootblock size to support TPM. TEST=Build pass BUG=b:317009620 Change-Id: I11fb505790a85d967032d48d9aa18e22f525a2e5 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-11-11soc/intel/pantherlake: Update SAF base addressAnil Kumar
BUG=b:357011633 TEST=build and boot coreboot image on Google/Fatcat board. Change-Id: I14fa8cf06144f46369cc8cab6087c790280e9859 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-10mb/hardkernel/odroid-h4: Correct number of jacks in hda_verb.cNicholas Sudsgaard
This was found due to the `_Static_assert()` from CB:84360 failing. Change-Id: I401e94b107612f8b7e8a73b3dbc12d7a5227ef01 Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-11-10mb/google/fatcat: Fix typo and missing carriage return characterJeremy Compostella
Change-Id: I2b5042795acee3e261765ca4c392d15ef7f5ca96 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-11-10device/device.h: Remove static.h includeNicholas Chin
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h to static.h") and commit 05a13e7ed9b9 ("sconfig: Move (WEAK_)DEV_PTR from device.h to static.h"), sources that require access to the devicetree should directly include static.h. This allows static.h to be removed from device.h, eliminating many unnecessary dependencies on the devicetree for objects that only need the device types and function declarations. Now that static.h has been included throughout the tree where necessary, it can be removed from device.h. Change-Id: Ie72840c71ffca2ada82456dda6a2c813f6a6c3ad Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84590 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-11-10tree: Include static.h for remaining devicetree usagesNicholas Chin
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h to static.h") and commit 05a13e7ed9b9 ("sconfig: Move (WEAK_)DEV_PTR from device.h to static.h"), sources that use code generated from the devicetree should directly include static.h. This allows static.h to be removed from device.h, eliminating many unnecessary dependencies on the devicetree for objects that only need the device types and function declarations. Add static.h to the includes of all remaining files that require static devicetree access through config_of_soc(), the sconfig generated names, or DEV_PTR(). Change-Id: I1d35ff2ac22f9ff5e0aa38b7ad707619e50387f3 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84591 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-11-10mb/google/*: Explicitly include static.h for DEV_PTRNicholas Chin
As per commit 05a13e7ed9b9 ("sconfig: Move (WEAK_)DEV_PTR from device.h to static.h"), sources that require access to devicetree static devices should directly include static.h. This allows static.h to be removed from device.h, eliminating unnecessary dependencies on the devicetree for objects that only need the device types and function declarations. The DEV_PTR macro resolves to names declared in static_devices.h, which is then included in static.h, so include the header whenever the macro is used. Change-Id: I05662e601af00866b7f26f4c6c6794b491bf676e Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84678 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-10soc/*: Explicitly include static.h for DEV_PTRNicholas Chin
As per commit 05a13e7ed9b9 ("sconfig: Move (WEAK_)DEV_PTR from device.h to static.h"), sources that require access to devicetree static devices should directly include static.h. This allows static.h to be removed from device.h, eliminating unnecessary dependencies on the devicetree for objects that only need the device types and function declarations. The DEV_PTR macro resolves to names declared in static_devices.h, which is then included in static.h, so include the header whenever the macro is used. Change-Id: Ie281e9a9c015b19bfc96b83021a6e3afd98abcc3 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84677 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-10sconfig: Move (WEAK_)DEV_PTR from device.h to static.hNicholas Chin
Similar to commit 865173153760 ("sconfig: Move config_of_soc from device.h to static.h"), move these macros to static.h to separate dependencies on device.h and static.h. These macros resolve to device alises that are declared in the generated static_devices.h header, so move them to static.h which includes static_devices.h. Since static.h remains included in device.h, any source that uses these macros should still compile correctly. Subsequent commits will add static.h to files that need them, after which static.h can be dropped from device.h. Change-Id: I1c76ad749769591da9c102b11eb618e93b68bd7c Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84676 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-11-10soc/intel/mtl to xeon_sp: Explicitly include static.h for config_of_socNicholas Chin
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h to static.h"), sources that require access to the devicetree should directly include static.h so that it can be removed from device.h, eliminating unnecessary dependencies on static.h for files that only need the types and function declarations in device.h. Change-Id: I3c118a707dfe7bb8932606f30eae52ef0b4c9efe Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-11-09arch/x86: Define macros for hard-coded HPET registersYuchi Chen
HPET General Capabilities and ID Register at offset 0x0 and Timer 0 Configuration and Capability Register at offset 0x100 are used to determine the generation of HPET ACPI tables. This patch adds macro definitions for these registers and fields. Definitions are from IA-PC HPET (High Precision Event Timers) Specification Revision 1.0a. Change-Id: I31413afcbfc42307e3ad3f99d75f33f87092d7aa Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84252 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-09soc/intel/common/block/imc: Add Integrated Memory Controller driverYuchi Chen
Intel common IMC contains an embedded SMBus controller for SPD data access. This patch implements IMC based SPD access supports through MMIO. Register definitons are from Intel Atom Processor C5100, C5300, P5300 and P5700 Product Families EDS, doc No. 575160 rev 2.0. Change-Id: I3f47ddeda94d3882852d64c0052f8fb42b6b7ad2 Tested-by: Yuchi Chen <yuchi.chen@intel.com> Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-11-09include/spd_bin.h: Add SPD IO layerYuchi Chen
By default, PCH SMBus codes will be called to retrieve SPD data. This patch adds a SPD IO layer so that SoC could implement its specific SPD IO layer functions such as using Integrated Memory Controller to get SPD data. Change-Id: I656298aeda409fca3c85266b5b8727fac9bfc917 Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84201 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-09include/device/pci_def.h: Add PCIe SRIOV definitionsYuchi Chen
Add SRIOV related definitions from section 9.3 of PCI Express Base Specification Revision 6.2. Change-Id: Ic4bf76b0e3b20e3d04e8264c6530ab4abb95a013 Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-11-09soc/intel/common/systemagent_server: Add server platform system agentYuchi Chen
Intel server processors have a different system agent design, it has some differences with client platform such as (1) no BDSM and BGSM registers; (2) different alignment size and bit fields in TOLUD, TOUUD and TSEG registers. Thus this patch adds a new common block for server platform system agent. Change-Id: If32c2a6524c9d55ce7f9c3dd203bcf85cab76c2c Signed-off-by: Yuchi Chen <yuchi.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83318 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-09mb/google/fatcat: Add ISH support with FW_CONFIG toggleSubrata Banik
This patch adds support for the Integrated Sensor Hub (ISH) on the Fatcat mainboard. ISH can be enabled or disabled via FW_CONFIG bit 24. This allows for flexible configuration depending on the system requirements. The GPIO configuration for ISH is also updated based on CBI settings, ensuring correct initialization and communication. Verified that the device tree correctly probes ISH based on the FW_CONFIG setting: * FW_CONFIG with bit 24 set: ISH is probed successfully. * FW_CONFIG with bit 24 cleared: ISH is not probed. BUG=b:370984186 TEST=Verified ISH probing behavior with different FW_CONFIG settings using CBI. Change-Id: I1a9734139a49be982a7dd43d5afd92e7fea6b29c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-08util/crosfirmware: Add support for parsing from manifest.jsonMatt DeVillier
Some ChromeOS recovery images, such as for GRUNT, support multiple boards / multiple bios/ec images, but do not break them out in a 'models' subdirectory like modern recovery images do. Instead, they use a manifest.json to map the board name to the correct bios/ec images. Add support for parsing out the info from here. TEST=run `util/chromeos/crosfirmware.sh kasumi` and verify that the correct shellball firmware is extracted from the recovery image. Change-Id: I64153ba16cb8328d65a0f088d05f04a969f6810f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-11-08soc/intel/pantherlake: Update power limits configJamie Ryu
This updates power_limits_config for Panther Lake U and H. Source: Intel PTL PDG 813278 Intel PTL FSP Power limit profiles table BUG=b:357011633 TEST=Build fatcat and boot with Panther Lake SoC and RVP. Change-Id: I1b9276af7f1e30b1cda3d8c016524fd6397fa4b2 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2024-11-08device/pci_ids, soc/intel/pantherlake: Add new PTL-H DID0Jamie Ryu
This patch adds new DID0 PCI device IDs for Intel PTL-H. Additionally, updates the System Agent driver's `systemagent_ids` list and Panther Lake SoC bootblock to support these new IDs. Source: Intel PTL-FAS. Document Number 812562 BUG=b:347669091 TEST=Build fatcat and boot with Panther Lake SoC with newly added MCH ID. With patch, coreboot log: `[DEBUG] MCH: device id b004 (rev 00) is Pantherlake H` `[DEBUG] MCH: device id b00a (rev 00) is Pantherlake H` Change-Id: I56e795696f661d88828d7549f856eee19c46c942 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84916 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2024-11-08mb/google/rauru: Enable ChromeOS ECYidi Lin
1. Configure ChromeOS EC 2. Pass GPIO_EC_AP_INT_ODL to the payload TEST=build pass BUG=b:317009620 Change-Id: I20828eee93975e75dfb777fe29d5e1c3454b5059 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84931 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-11-08soc/mediatek/mt8196: Add SPI driver supportLiya Li
Add SPI controller driver code with support for 8 buses (SPI0 to SPI7). Test=Build pass, verify the wavefroms for SPI0~7 are correct. BUG=b:317009620 Change-Id: I10dd1105931c4911ce5257803073b7af76115c75 Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84930 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-08soc/mediatek/mt8196: Add PLL and clock init supportGuangjie Song
Add PLL and clock init code, frequency meter and APIs for raising little CPU frequency and set tvdpll frequency. TEST=build pass and driver init ok BUG=b:317009620 Signed-off-by: Guangjie Song <guangjie.song@mediatek.corp-partner.google.com> Change-Id: Icac99fb210c87c8b7b14af627fbd2f14e4c47240 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-08soc/intel/xeon_sp: Reduce stack usage by 18KiBPatrick Rudolph
Reduce stack usage of acpi_fill_srat_memory() by 18KiB. Directly write the SRAT table entries instead of using a temporary buffer on the stack. FIXES: Crash on ocp/tiogapass when writing SRAT table TEST: Still boots on intel/archercity_crb Change-Id: I91a6787ade8b465da7837b241c0aab00251f7de4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84832 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-08soc/intel/common: sata: Opt out in sata_acpi_fill_ssdt() when not namedPatrick Rudolph
When soc_acpi_name() returns NULL do not create the AML code. This prevents errors on the OS side when it tries to parse the AML code and doesn't find a name string for the device: ACPI Warning: Invalid character(s) in name (0x44415F08), repaired: [*_AD] Change-Id: I72225a975663a1028283437cac3b9231b7c77ead Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-08soc/intel/xeon_sp: Create SSDT for Gen6 LPC controllerLu, Pen-ChunX
In coreboot, LPC ACPI objects with its attached devices are usually provided by static DSDT. For Xeon-SP Gen6 LPC, its logical attached devices are created from dynamic SSDT (e.g. super IO). Create a simple SSDT for LPC in dynamic way as well to complete the device relationship chain. Fix below issues during Linux OS boot. The issue will block Windows OS boot as well. [ 22.986142] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.DI00.LPCB], AE_NOT_FOUND (20230628/dswload2-162) [ 22.986792] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220) [ 22.987786] ACPI: Skipping parse of AML opcode: Scope (0x0010) Change-Id: I08543fc77f0f3e633b05889e921c5183e6e20d8e Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84842 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-08soc/intel/xeon_sp/gnr: Enable IRQ routingShuo Liu
Enable IRQ routing per PCH IRQ usage convention and report domain _PRT. Change-Id: I095c7a302894437c90d854ce4e30467357eee2ba Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84328 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-08mb/google/nissa/var/riven: Configure Acoustic noise mitigationDavid Wu
Follow the power team’s recommendation: - Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to SLEW_FAST_4 - Set FastPkgCRampDisable VCCIA and VCCGT to 1 BUG=b:376165743 TEST=built firmware and verified by power team, the acoustic noise can be improved a lot. Change-Id: Ia71985ef21d634763fc5ae22e4f611f7f5e9652a Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com>
2024-11-08mb/google/dedede/var/drawcia: Enable LTR mechanism for PCIe root port 8Robert Chen
Realtek AX generation IC utilizes LTR-issued latency requests to optimize WiFi latency and power consumption, it requires host enabling LTR to meet the design requirement. We enabled the host's LTR by enabling PCIe root port 8, which met resltek's technical requirements. BUG=b:377400590 TEST=Tested on Drawman with RTL8852BE Use command $ lspci -vv, LTR+ is listed on DevCtl2 BRANCH=firmware-dedede-13606.B Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Change-Id: I093951f71e971fe83d61d9fcda8bf16cc5f82ffe Reviewed-on: https://review.coreboot.org/c/coreboot/+/85011 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-07soc/intel/[tiger|cannon|meteor]lake: Fix uninitialized usb_cfg pointerKarthikeyan Ramasubramanian
This patch addresses uninitialized usb_cfg pointer warning which is also an error - src/soc/intel/meteorlake/fsp_params.c: error: 'usb_cfg' may be used uninitialized in this function [-Werror=maybe-uninitialized] BUG=None TEST=./util/abuild/abuild for GOOGLE_HATCH, GOOGLE_VOLTEER, GOOGLE_KARIS Change-Id: I169b6d3a979c4db78e7c0932a126d8b0a9306da7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85026 Reviewed-by: Jon Murphy <jpmurphy@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-11-07soc/intel/cmn/block/cse: Add API to check the current boot partitionSubrata Banik
This patch introduces an API to check whether CSE is booting from the RW slot. This information can be used to determine if a CSE firmware update is pending, which would help to optimize the boot flow by knowing if any reset is expected due to CSE sync. TEST=Able to build google/brox. Change-Id: I1a63ae9992d83b439a0f995d599ee475f7abd75b Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-11-07soc/intel/alderlake: select Kconfig MRC_CACHE_USING_MRC_VERSIONRonak Kanabar
This patch introduces support for storing the MRC cache based on the MRC version for RPL platforms. This patch selects the MRC_CACHE_USING_MRC_VERSION option when client SOC_INTEL_RAPTORLAKE is chosen. BUG=b:281846937 TEST=Able to build and boot google/brox and verify MRC version in CBMEM. Change-Id: I8adf519c7f27b30d69c19f1c37cf410ac8ae54db Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-11-07drivers/spi/spi_flash: introduce 'spi_flash_cmd_multi'Felix Held
A following patch that adds some support for reading the serial flash discoverable parameters (SFDP) data structures needs to send more than just the one command byte that 'spi_flash_cmd' supports. To be able to do this, introduce the 'spi_flash_cmd_multi' function which supports sending multiple bytes before reading back some bytes. The prototype is added to drivers/spi/spi_flash_internal.h since only other files in the same directory are supposed to be using that function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1f3872463249240c0a32e2825e4302894e856b2e Reviewed-on: https://review.coreboot.org/c/coreboot/+/84789 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-07soc/amd/common/psp/rpmc: bring debug output in line with fmap sectionFelix Held
Call the PSP RPMC NVRAM 'PSP RPMC NVRAM' instead of 'PSP NVRAM' in the debug console output to not be misleading, since the RPMC feature uses the 'PSP_RPMC_NVRAM' fmap section and not the 'PSP_NVRAM' fmap section. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie89dfcfe4b8780f422c222477bb627e03bd3662d Reviewed-on: https://review.coreboot.org/c/coreboot/+/85007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-11-07mb/google/rauru: Add new board variant HyliaYang Wu
Add a new Rauru follower 'Hylia'. BRANCH=rauru BUG=b:376357839 TEST=emerge-rauru coreboot chromeos-bootimage Change-Id: I79c4525347fd7b1ecea6df05e1a6b726b78e946f Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84924 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-07mb/dell: OptiPlex 3050 Micro port (Intel KabyLake)Mate Kukri
- Boots Linux 6.11 (Debian) - GRUB and SeaBIOS payloads work - SMSC SCH5553 SIO/EC + Serial port works + PWM fan control works - Realtek Gigabit LAN works - WiFi slot works - NVMe SSD slot works - Extra: LPSS UART0 + Stock FW sets undocumented power gating bit, RTC battery needs to be pulled for it to work. + Signals exposed on test points on the back of the board. FIXME: add documentation about this - Needs 'deguard' to bypass BootGuard + See https://review.coreboot.org/admin/repos/deguard,general - Audio works - All USB ports work - Currently limited to the Micro form factor, but others are very similar - HDA verbs and VBT by Leah Rowe Change-Id: I8d443e39ee684a4eaa19c835a945cfe569c051e2 Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82053 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-11-07soc/intel/xeon_sp: Add acpigen_write_PRT_pre_routedLu, Pen-ChunX
acpigen_write_PRT_pre_routed writes _PRT covering all direct subordinate child devices based on interrupt line/pin info from their PCI configuration spaces. It is required that IRQ routing and PCI configuration space update to be done ahead of time. TEST=Build and boot on intel/archercity CRB Change-Id: Ic54888f76d2ec9804442bec5aec54267d9a16d7c Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com> Signed-off-by: Shuo Liu <shuo.liu@intel.com> Signed-off-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82253 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2024-11-07soc/mediatek/common: Use write32p and read32p for trackerYidi Lin
TEST=emerge-geralt coreboot Change-Id: I9ee64677e9126789a07db1963a2c17a504cb4d9c Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84959 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-07soc/mediatek/common: Refactor `struct tracker`Yidi Lin
Rather than using a static array size for the `offset` variable, use a pointer named `offsets` that points to a dynamically allocated array. A separate variable called `offset_size` stores the size of this array. TEST=emerge-corsola coreboot && emerge-geralt coreboot Change-Id: I4b89c27fd693ee08e670c1a9ab4cbdbec220bee7 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-11-07mb/cwwk/ald: Remove DIMM_MAXArthur Heymans
For ADL DIMM_MAX is a soc property and not a mainboard property. Change-Id: I834b631ffb9b7b2272ec631122de61136e55651a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84207 Reviewed-by: Alicja Michalska <ahplka19@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-07Documentation: Update Protectli fw6b documentationsXue Yao
Update documentations: - ME cleaner has been tested on the fw6b. - More observations on the stock firmware is documented. - Compatible boards are listed along with the original manufacturer. Signed-off-by: Xue Yao <xueyao@xyte.ch> Change-Id: I4938d81d57fc8172fefcc00222806fff0735d503 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63016 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-11-07mb/google/nissa/var/rull: Add Fn key scancodeRui Zhou
The Fn key on rull emits a scancode of 94 (0x5e). BUG=b:372211281 TEST=Flash rull, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: Idb02d7013fa78233abff556bc6fa1d224c434338 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-07mb/google/nissa/var/rull: Change padbased_override to rtd3 of wifiRui Zhou
The previous method made cnvi wifi6 configuration cumbersome and unusable. And delete unused pins. We abandoned the fw_config judgment method and changed to the better rtd3. BUG=b:374629673 BRANCH=None TEST=1. emerge-nissa coreboot chromeos-bootimage 2. wifi7&wifi6 function is normal Change-Id: Ia95dc9f6b707db63840de9b15b38bdaea48ea192 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85000 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jayvik Desai <jayvik@google.com>
2024-11-07mb/google/nissa/var/rull: add touchpad init config of Synaptics&PIXARTRui Zhou
Add Synaptics&PIXART init cpnfig, enable touchpad function BUG=b:374629673 BRANCH=None TEST=1. emerge-nissa coreboot chromeos-bootimage 2. touchpad function normal Change-Id: Iacf09cd46d4a97fb79f91043c84452f76689462f Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84999 Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-07mb/google/nissa/var/rull: add ssd timing and modify ssd GPIO pins of rtd3Rui Zhou
The previous GPIO config will cause the SSD device to not be recognized. Based on schematics NB7559_MB_SCH_V1_2024_1010.pdf. So we adjust the position of the enable and reset pins. BUG=b:374629673 BRANCH=None TEST=1. emerge-nissa coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: Idb36f67206450612655cb3efd3cce240475ef3ab Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-07mb/gigabyte/ga-h77m-d3h: Add Sandy/Ivy Bridge board GA-H77M-D3HFabian Groffen
This board is based off ga-b75m-d3h, which uses the same SuperIO chip. It doesn't have the ASMedia SATA3 controller, the H77 chipset comes with 2 SATA3 ports next to the 4 SATA2 ports. Flashing notes: These boards come with dual-BIOS feature. This is set of two unremovable what appears to be identical chips marked M_BIOS and B_BIOS. Flash the B_BIOS chip, and boot the system. Ensure you have a payload and setup ready to boot a Linux system with iomem=relaxed or similar. Immediately use flashrom -p internal to flash the same firmware again. If you skip this step your next boot will show weird exception traces in either coreboot or your payload. Flashing from there via the chip is very difficult (you have to try many times in order to get a booting run), which can all be remedied by doing a flash from internal. I suppose the dual-BIOS feature is somewhat in the way here. Tested with: - CPU Core i7-3770S - RAM single bank 4GB CL11, two banks 4+4GB CL11 - OS Gentoo Linux LiveUSB, KDE desktop (Linux 5.15.72) Working: - GRUB2 payload - Intel ME stripped - Integrated graphics with libgfxinit - (boot from) SATA2, SATA3 ports - Rear and mainboard connector USB ports, supporting boot - Atheros GbE NIC - 2.0 channel audio via lineout jack output - ACPI (power button triggers OS events) - S3 suspend/resume - PWM FAN control, FAN speed readings - Temperature sensor readings Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Icb3e74326a0a7aaf770d1917a2a0931feadd7eab Reviewed-on: https://review.coreboot.org/c/coreboot/+/77046 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-07mb/asrock: Add Asrock Industrial IMB-1222 motherboardMaxim Polyakov
ASRock IMB-1222 Intel Comet Lake-S Q470E industrial thin mini-ITX motherboard [1]. Working: - Dual Channel DDR4 2933/2666/2400 MHz; - Intel UHD Graphics (VGA Option ROM, libgfxinit, GOP driver); - DP (both), HDMI; - PCIe x16 Slot (Gen3); - SATA ports; - USB 2.0 ports; - USB 3.2 ports; - M.2 Key-E 2230 slot for Wireless (PCIe x1, USB 2.0 and CNVi); - M.2 Key-B 3042/3052 slot for 4G/5G modem (PCIe x1); - M.2 Key-M 2242/2260/2280 for SSD/NVMe (PCIE x4, SATA3); - LAN1 Intel I225LM/I225V, 10/100/1000/2500 Mbps; - LAN2 Intel I219LM, 10/100/1000 Mbps; - Realtek ALC887 HD Audio (line-out, mic-in); - COM 1/2/3/4 ports; - onboard speaker; - HWM/FANs control (fintek f81966); - S3 suspend and wake; - TPM; - disabling ME with me_cleaner [2]; Payload: - Linux as payload; - LinuxBoot; - SeaBIOS; - edk2 [3]. Bootable OS: - Ubuntu 22.04 (Linux 6.5.0-15-generic); - Ubuntu 24.04 (Linux 6.8.0-41-generic); - Microsoft Windows 10 Pro (10.0.19045.4780, 22H2 2022); - Andoid 13, Bliss OS x86_64 (16.9.7, Linux 6.1.112-gloria-xanmod1). Unknown/untested: - USB3.0 in M.2 Key-B 3042/3052 slot; - eDP/LVDS; - PCIe riser cards; - SPDIF. There is no schematic/boardview, reverse engineering only. This port is based on system76/bonw14 because it has a similar topology. [1] https://web.archive.org/web/20220924171403/https:// www.asrockind.com/en-gb/IMB-1222 [2] XutaxKamay's me_cleaner fork, https://github.com/XutaxKamay/me_cleaner, v1.2-9-gf20532d [3] MrChromebox's edk2 fork, https://github.com/mrchromebox/edk2 uefipayload_2408 branch Change-Id: Id2b4c903546f9174b5e7dd26e54a0c5aaa09e1f8 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83107 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06soc/intel/alderlake: Fix uninitialized usb_cfg pointerKarthikeyan Ramasubramanian
This patch addresses uninitialized usb_cfg pointer warning which is also an error - src/soc/intel/alderlake/fsp_params.c:936:48: error: 'usb_cfg' may be used uninitialized in this function [-Werror=maybe-uninitialized] BUG=None TEST=./util/abuild/abuild Change-Id: I764fed561dfe2a571f3404fe505997edd7aa5ff7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84939 Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06mb/google/brox: Hint romstage init about upcoming resetKarthikeyan Ramasubramanian
Add support for the mainboard to check for any potential firmware component update and hence the assosicated reset. This indication can be used to avoid any redundant resets during the boot flow. BUG=b:375444631 TEST=Build Brox BIOS image and boot to OS. Ensure that the hints are provided correctly and 2 redundant resets are filtered out. Change-Id: Ieed3f9013dee9aa501a3f0403f3a28722a3878f1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-06ec/google/chromeec: Fix typo in google_chromeec_get_pd_chip_infoKarthikeyan Ramasubramanian
An unintended suffix got added in google_chromeec_get_pd_chip_info. Fix the typo by removing that suffix. BUG=None TEST=Build Brox BIOS image and boot to OS. Change-Id: I76048ec1ed6b4387098fecf35ccc5b1c1742abb0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-06mb/google/brox: Reduce PL4 only for battery disconnected scenarioSowmya Aralguppe
This patch reduces PL4 only for no battery condition i.e. when battery is disconnected or not physically present. BUG=b:377305625 TEST=Build Brox and boot when the battery is disconnected Change-Id: I59a1028ce9cd3a6cf98f865d9c085a64f391f201 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-11-06vc/intel/fsp/raptorlake: Add FspProducerDataHeader.h headerRonak Kanabar
This patch is to add FspProducerDataHeader.h header file to support MRC version Info in RPL. BUG=b:281846937 TEST=Able to build and boot google/brox. Change-Id: Iaf7983fbe8f103d9f51065cd160177e2bde7fd3d Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-11-06soc/intel/alderlake: select UDK_202305_BINDING for RPLRonak Kanabar
RPL FSP v5311 uses 202305 Edk2. Select UDK_202305_BINDING Kconfig for RPL SoC. BUG=b:281846937 TEST=Able to build and boot google/brox. Change-Id: I8dcc7d85cddadcce148ded5a81658253e8598413 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84722 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jayvik Desai <jayvik@google.com>
2024-11-06vendorcode/intel: Add edk2-stable202305 supportRonak Kanabar
Add edk2-stable202305 support for MTL and RPL FSPs. This patch includes (edk2/edk2-stable202302) all required headers for edk2-stable202302 EDK2 tag from EDK2 github project using below command: git clone -b edk2-stable202305 https://github.com/tianocore/edk2.git commit hash: ba91d0292e593df8528b66f99c1b0b14fadc8e16 Only include necessary header files. MdePkg/Include/Base.h was updated to avoid compilation errors through safeguarding definitions for MIN, MAX, NULL, ABS, ARRAY_SIZE. Add following fixes from older Edk2 060492ecd2 Safe guard enum macro in SmBios.h 2bf9599cf1 Use fixed size struct elements cf4c6fd225 Remove FSPM_ARCH_UPD config guard dc781d3a83 Define FSP_SIG macro for FSP 2.x compatibility d045074b91 Remove wchar_t asserts Change-Id: I96f0d0e393d31b325f9e42e3494556a2f6e1228e Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-11-06mb/google/dedede/var/awasuki: Enable LTR mechanism for PCIe root port 8Hualin Wei
Realtek AX generation IC utilizes LTR-issued latency requests to optimize WiFi latency and power consumption, it requires host enabling LTR to meet the design requirement. We enabled the host's LTR by enabling PCIe root port 8, which met resltek's technical requirements. BUG=b:366383364 TEST=Tested on Awasuki with RTL8852BE Use command $ lspci -vv, LTR+ is listed on DevCtl2 Change-Id: I0c80f89b4fdb52a5d9da17548537072ec2d40418 Signed-off-by: Hualin Wei <weihualin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-11-06soc/intel/jasperlake: add support for RP LTR mechanismLawrence Chang
Reserve Root Port LTR mechanism in FSP, in case some devices need to optimize LTR. BUG=366383364 TEST=Tested on Awasuki with RTL8852BE use lspci -xxx to get PCIE config space dump, and LTR Mechanism Enable bit is offset 68h[10]. 00:1c.0 PCI bridge: Intel Corporation Device 4dbf (rev 01) 00: 86 80 bf 4d 07 05 10 00 01 00 04 06 10 00 81 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 20 20 00 20 20: c0 7f c0 7f f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 04 12 00 40: 10 80 42 01 00 80 00 00 00 00 10 00 13 4c 72 08 50: 43 00 11 70 00 b2 3c 00 00 00 40 01 08 00 00 00 60: 00 00 00 00 37 08 00 00 00 04 00 00 0e 00 00 00 70: 03 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 05 90 01 00 38 02 e0 fe 00 00 00 00 00 00 00 00 90: 0d a0 00 00 86 80 bf 4d 00 00 00 00 00 00 00 00 a0: 01 00 03 c8 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 01 10 00 07 42 18 01 40 08 00 9e 09 00 00 00 00 e0: 00 03 e3 00 00 00 00 00 16 00 10 00 00 00 00 00 f0: 50 01 00 00 00 00 00 4c b5 0f 02 01 04 00 00 84 Change-Id: I85e50b01cc9fb5522d457cfce3700b7c85d7012f Signed-off-by: Lawrence Chang <lawrence.chang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84866 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: David Ruth <druth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06mb/google/dedede/var/drawcia: Update ext_vr for board version > 0xbRobert Chen
ext_vr_update should be run after board version 0xb, but skipped by return. Drawper LTE board version was set after 0x9, but there are more board added after that. Specific Drawper board version as 0xa, 0xb and 0xf. BUG=b:376828839 BRANCH=firmware-dedede-13606.B TEST=emerge-dedede coreboot chromeos-bootimage and test on DUTs. Change-Id: I13f4709b6f490169f69054cf2b26430b4de0746a Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-11-06soc/intel/meteorlake: Remove SOC_INTEL_GFX_MBUS_JOIN configSubrata Banik
This patch removes the SOC_INTEL_GFX_MBUS_JOIN configuration option. Support for fast modeset joining has been added to the mainline i915 kernel driver (https://patchwork.freedesktop.org/series/130480/), making this coreboot-specific workaround unnecessary. BUG=b:291885733 TEST=Successful build and boot of google/screebo with single and dual displays, no redundant boot splash. Change-Id: Ifb0416df53a453ce16815f9fd52ec6b53fade5e2 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81034 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Paz Zcharya <pazz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06mb/intel/coffeelake_rvp/cml_u: Correct number of jacks in hda_verb.cNicholas Sudsgaard
This was found due to the `_Static_assert()` from CB:84360 failing. As I do not own this board, I cannot test whether is change is "functionally correct". However, I believe it is more likely that the original authors forgot to update the verb table size, rather than them adding additional verb data which was not meant to be used. TEST=`_Static_assert()` mentioned above does not fail anymore. Change-Id: I8df44e056bc841bfb344749ba214e6fb71a1955b Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84487 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06mb/google/nissa/var/glassway: Add initial LTE related settingsDaniel Peng
1. Add DB_1C_LTE 4 on DB_USB fw_config. 2. Implement WWAN power sequencing. 3. Disable LTE-related GPIOs based on fw_config. 4. Add I2C SX9324 (P-sensor) support. Refer Schematic file: CA31AC_R10_MB_SUB_240903A_P.pdf BUG=b:374666995 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Confirm the device node i2c-STH9324:00 created correctly, and command for # i2cdump -f -y 11 0x28 is workable. Change-Id: Ida56ff338d82f48aef419a65830a3380c83123d5 Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84925 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-11-06Makefile.mk: Suppress stack-usage LTO link warningArthur Heymans
Suppress the following warning during linking with gcc: src/drivers/spi/spi_flash.c: In function 'spi_flash_cmd_write': src/drivers/spi/spi_flash.c:138:5: error: stack usage might be unbounded [-Werror=stack-usage=] 138 | int spi_flash_cmd_write(const struct spi_slave *spi, const u8 *cmd, Change-Id: If08d6d543a4fcff07003af8d1f8dd59ab79f42f8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-11-06util/cbfstool: Deal with how lld organizes loadable segmentsArthur Heymans
LLD deals with loadable segments in a different manner than BFD. The MemSiz of the .text loadable section is padded till the virtaddr of the .car.data section. Since .text is not loaded in ENV_CAR this does not matter. Change-Id: I1a0541c8ea3dfbebfba83d505d84b6db12000723 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84043 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06soc/mediatek/mt8196: Disable irq2axi featureRunyang Chen
Irq2axi translates wire-based interrupt into message signal interrupt. Since MT8196 uses legacy wire-based interrupt, this feature needs to be disabled. If the interrupt is not handled, it will cause the system fail to boot. TEST=Build pass, check irq2axi_disable log and the interrupt can be correctly handled by checking /proc/interrupts. BUG=b:317009620 Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I0e89a0ee75e574a4b9e8df0a0f6a5f6e03bba2d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84896 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06soc/mediatek/mt8196: Enable EARLY_MMU_INITYidi Lin
The boot time is improved by 58ms in bootblock. (78ms -> 20m) BUG=b:361729697 TEST=check cbmem Change-Id: I27ce378ba8e3744cfb3921835e34b32bbba991cb Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84897 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06mb/google/rauru: Complete PCIe reset in romstageYidi Lin
De-assert PERST# at romstage to reduce the waiting time in ramstage. BUG=b:361728592 TEST=The boot time improves 62ms Change-Id: I2cd5cd59e7513b6e4036c3e8013a3c7322d2f787 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-06mb/cwwk/adl/devicetree: correct PCIe RP 12 clock configurationFelix Held
Looking at Intel document 759603 revision 001, Alder Lake N only has 5 PCIe clock outputs and clock request pins. I only have the version 2 of this board which has a significantly different USB port configuration to version 1, but there the Ethernet controller on RP 11 and the E key m.2 slot on RP 12 share the last PCIe clock output. The on-board TUBF0304 clock buffer chip takes the clock output form the last PCH PCIe clock generator output and drives the clock inputs of both the last Ethernet chip and the E key m.2 slot. Since the last clock output is always active, since RP 11 has the PCIE_RP_CLK_REQ_UNUSED flag set, using the non-existent clock output and request for RP 12 didn't break things. ASPM L0s might still work though, since that one doesn't involve switching off the PCIe reference clock, but haven't tested that yet. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I103f7c3fe0b806f5c0a5202b8221f522a4b1c378 Reviewed-on: https://review.coreboot.org/c/coreboot/+/83911 Reviewed-by: coreboot org <coreboot.org@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-05mb/lenovo: Add ThinkCentre M920q (Coffee Lake)Maciej Pijanowski
It may come with 8th or 9th Gen CPUs. i5-8500T has been tested here. Works: - Serial adapter from daughter board (COM1 connector) - USB ports front and back - USB-C port (charging, data) - HDMI - Ethernet - SATA - NVMe - internal speaker - TPM2.0 - PCIe x8 port (x8 riser tested, x4 not) Does not work: - front audio jacks Change-Id: Iea1dc5745c0ecf687fa18b793f0aab4b0855d6d4 Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80609 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-05soc/amd/common/psp_smi_flash: refactor SPI controller busy checkFelix Held
Since the functions that call 'spi_controller_available' end up checking if the SPI controller is busy, refactor the function into 'spi_controller_busy' to simplify the logic on the caller's side. Also move printing of the notice that the SPI controller is busy to 'spi_controller_busy' to not have that duplicated in caller. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibc21ab6eacf07c4adffdb4658142c2f9dfcbf2a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84920 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-05soc/amd/common/psp_smi_flash: factor out get_flash_deviceFelix Held
Since the RPMC-related functions will only need the spi_flash struct, but not the region_device struct of the store region corresponding to the 'target_nv_id', factor out 'get_flash_device' from 'find_psp_spi_flash_device_region'. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia99d3454df2c1c4182c193da7de1bbb4eef18313 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84905 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ana Carolina Cabral
2024-11-05soc/intel/alderlake: Disable UFS controllers only on S5 resumeSubrata Banik
Disable UFS controllers during romstage initialization only when resuming from S5 (full power off). On warm reboot, the UFS controllers are already disabled by the previous boot cycle, so disabling them again is unnecessary. TEST=Able to ensure UFS controller is already disabled in warm reboot path and not causing any problem during S0ix cycle test. Change-Id: Ia27d2156a002cef032d5f57d212cf4eb520b3bdf Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jayvik Desai <jayvik@google.com>
2024-11-05soc/intel/meteorlake: Disable eSOL for Ovis/DekuSubrata Banik
Disable the `FSP_UGOP_EARLY_SIGN_OF_LIFE` option (eSOL) for the Ovis baseboard. eSOL currently only supports display output over eDP and HDMI. Ovis/Deku exclusively use Type-C for display, and eSOL cannot render output over Type-C during early boot because it depends on Type-C firmware loaded in a later stage. TEST=Able to build and boot google/deku. Change-Id: I5ddbd340f667b1631a42d130a793f0b1831aa0ba Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-11-05mb/google/nissa/var/glassway: Add touch screen ILIT2901 supportDaniel Peng
1. Extend 1 bit [34] for the TOUCHSCREEN_SOURCE. SSFC range for TOUCHSCREEN_SOURCE is bit[32:34]. 2. Touchscreen panel: MUTTO A153728S1Y, and set TOUCHSCREEN_ILIT2901 to value "4" 3. Datasheet: #153728S1V1.0 SPEC_20240923.pdf BUG=b:375986645 BRANCH=firmware-nissa-15217.B TEST=1. emerge-nissa coreboot chromeos-bootimage 2. Confirm command evtest and touchscreen function is workable. Change-Id: I6e13c948edca5a894e1a00a1954f0f88c4a079cf Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84894 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-05ec/google/chromeec: Add API to get PD Chip infoKarthikeyan Ramasubramanian
Add API to get Power Delivery (PD) Chip info which includes vendor ID, product ID and firmware version(if any). BUG=None TEST=Build Brox BIOS image and boot to OS. Change-Id: I4cc4493ac64d44076877fee633488c95cd09807e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-11-04mb/google/fizz: Fix USB port defintionsMatt DeVillier
commit 6c83a71b0a80 ("skl mainboards/dt: Move usb{2,3}_ports settings into XHCI device scope") not only moved the USB port definitions under the XHCI device reference, but also combined multiple register definitions. In doing so, it broke the inheritance from the baseboard, since the variant overridetree registers now replaced the entire usb2_ports/usb3_ports structs, rather than replacing individual array elements therein. This resulted in any USB ports inherited from the baseboard and not overridden by the variant being non-functional as they were not included in the resulting combined devicetree. To fix this, return to overriding individual array elements in the usb2/3_ports structs. TEST=build/boot google/fizz/var/karma. Verify all USB ports present and functional. Verify mainboard/static.c in built shows all ports. Change-Id: I0e80bf4949a857c21d44537eb720a7a8a7db2f80 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84955 Reviewed-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-04mb/google/fatcat/var/fatcat: Configure eSPI alarm GPIOSukumar Ghorai
This patch configures the ESPI_SOC_ALERT_L GPIO pad on fatcat as NC to enable S0ix low power entry. TEST=Build fatcat and check the platform boots without an issue. Change-Id: Icb80a56177105c0281d05fe1f5daa87e6f7e291f Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84957 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2024-11-04mb/google/fatcat: Disable package c-state auto-demotionSukumar Ghorai
Package C-state auto demotion feature allows hardware to determine lower C-state as per platform policy. Since platform sets performance policy to balanced from hardware, auto demotion can be disabled without performance impact. TEST=Build fatcat and check the platform boots without an issue. Change-Id: I01f2cb8ac1093ae98cc076e35ad1924baa53aa59 Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-04ec/google/chromeec: Add is_battery_present()Sowmya Aralguppe
This patch adds is_battery_present() to check if the battery is physically present BUG=b:335046538,b:329722827 TEST=Build Brox and check is_battery_present returns the correct battery status. Change-Id: Ie49ed8f6d8b0fa59ec0e7b06efea9cac4d253957 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83735 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-11-04mb/google/dedede/var/awasuki: Tune I2C touchpad for freq and THWei Hualin
1. Modify the I2C frequency of the touchpad between 380 Khz and 400 Khz to meet the spec. 2. Increase clk the time of high (TH) to greater than 600ns. Before: I2C0 - 420KHz TH - 557ns After: I2C0 - 398Khz TH - 630ns BUG=b:351968527 TEST=Check that the wave form meets the spec. Change-Id: I5ccaa3a669e18319311de14833966410c7adf40d Signed-off-by: Hualin Wei <weihualin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84898 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-11-04mb/google/fatcat/var/francka: Generate RAM ID for MT62F2G32D4DS-020 WT:FAmanda Huang
Add Micron part MT62F2G32D4DS-020 WT:F only for Francka. DRAM Part Name ID to assign MT62F2G32D4DS-020 WT:F 0 (0000) BUG=b:373394046 TEST=emerge-fatcat coreboot Change-Id: I2de56c8c7a028edefbd3dc53f8b1e26dee3286f7 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84781 Reviewed-by: Pranava Y N <pranavayn@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-04soc/mediatek/mt8188/spi: Fix out-of-bound array access for pad_funcsYu-Ping Wu
The size of the inner array of the 2-dimensional array pad_funcs should be 4 instead of SPI_BUS_NUMBER (6). This bug leads to two extra gpio_set_mode() calls with unexpected GPIOs. Inspecting spi.o, the data immediately after the .rodata.pad_funcs section is .rodata.spi_ctrlr_bus_map, with the following data: 00000428 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00000438 00 00 00 00 00 00 00 00 ... This is equivalent to the following calls: gpio_set_mode(GPIO(GPIO05), 0); gpio_set_mode(GPIO(GPIO00), 0); The second call is already included in the pad_funcs array, so the first call is the only practical impact of this bug. Change-Id: I9c44f09b3cdadbbf039b95efca7144f213672092 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-11-03soc/intel/alderlake: Do lazy reset after disabling UFSKarthikeyan Ramasubramanian
If the mainboard expects upcoming reset, then skip the reset after disabling UFS. This will reduce the number of resets during firmware update. BUG=b:375444631 TEST=Build Brox BIOS image and boot to OS. Perform a firmware update and confirm that the number of reset is reduced by 2 resets. Change-Id: I4399555302ec23a76f89f406f437f311eea0ef99 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84935 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-11-02mb/google/fatcat: Add devicetree for MAX98357A codecAnil Kumar
Update device tree to support speaker o/p on MAX98357A AIC. BUG=b:357011633 TEST=build coreboot image and test audio playback on Google/Fatcat board. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I20de87f673e947f0e2332b818ebca01c0fa5e200 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84888 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-01mb/google/brya/var/banshee: select SOC_INTEL_RAPTORLAKEIan Feng
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers for FSP as banshee is using a converged firmware image. This effort also helps to save banshee boot time by 80-100ms as RPL FSP is better optimized. Additionally, Raptor Lake platform only needs 1 SIPI-SIPI which saves 10ms of the boot time. BUG=b:358254132 TEST=Able to build and boot google/banshee. cold boot time w/o this CL ``` Total Time: 1,399,888 ``` cold boot time w/ this CL ``` Total Time: 1,295,334 ``` Change-Id: If22e07a4c1b35fe1d060ca523743c6c503937287 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2024-11-01mb/google/nissa/var/riven: Increase the VccIn Aux Imon IccMax to 30ADavid Wu
From power team's recommendation, increase the VccIn Aux Imon IccMax to 30A to meet HW settings. BUG=b:376306118 TEST=Build firmware and check the value is changing as expected. Paste the firmware log. [SPEW ] VccInAuxImonIccImax= 0x78 [SPEW ] (MAILBOX) VccInAuxImonIccImax = 120 (1/4 Amp) [INFO ] Override VccInAuxImonIccImax = 120 Change-Id: I71020c2f631cb517a52d4bb65e35277eb731ced7 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-313rdparty/intel-microcode: Update submodule to upstream mainFelix Singer
Updating from commit id fbfe741: 2024-09-10 12:02:03 -0600 - (microcode-20240910 Release) to commit id 129f82f: 2024-10-29 17:43:50 -0600 - (microcode-20241029 Release) This brings in 1 new commits: 129f82f microcode-20241029 Release Change-Id: I0e4983d6e40a556f1f6f24cc253dc204b5b7d16c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-10-31mb/google/rauru: Pre-initialize PCIe at the bootblock stageJianjun Wang
According to the PCIe CEM specification, the deassertion of PERST# should occur at least 100ms after the assertion. Right now we simply wait for 100ms in ramstage for that. To speed up the boot time, pre-initialize PCIe by asserting PERST# earlier in the bootblock stage. The pre-initialization time is stored in the early init data region, so that the PCIe initialization in ramstage could make sure the required 100ms delay is still reached. This pre-initialization will speed up the boot time by 100ms on rauru. TEST=Build pass, show pcie init pass log: mtk_pcie_domain_enable: PCIe link up success (1) BUG=b:317009620 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I2b84c25ae3ea9069fd38fa6b20b8235a7fc3a484 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-10-31mb/google/nissa/var/teliks: Match VBT with SSFCzengqinghong
We want to configure different VBT timings for panels of different sizes and distinguish them through SSFC. We select the reserved bit 6 of SSFC as the flag bit. When using a 12-inch panel, set this bit to 0; when using an 11-inch panel, set this bit to 1. Without splitting, the platform_BootPerf test will fail. BUG=b:374428465 TEST= 1. can match VBT with SSFC -When SSFC is set to 0x40: $ cat /sys/firmware/log | grep vbt Bit 6 of SSFC is 1, use vbt-teliks_panel_11_inch.bin CBFS: Found 'vbt-teliks_panel_11_inch.bin' @0x1c6140 size 0x50f in mcache @0x76adda14 -When SSFC is set to 0x0: $ cat /sys/firmware/log | grep vbt Bit 6 of SSFC is 0, use vbt-teliks.bin CBFS: Found 'vbt-teliks.bin' @0x1c5bc0 size 0x50e in mcache @0x76add9b0 2. can pass platform_BootPerf test The platform_BootPerf time measured for all SKUs is less than 1.55s. Change-Id: Ia8fb45aede5ead4826d983760506c366a70643ee Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84871 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-31mb/google/fatcat: Adjust EC host command range for microchip ECSubrata Banik
This commit adjusts the EC host command range for the Fatcat board to 0x800-0x807 & 0x200-0x20f. This change is necessary because the microchip EC used on the Fatcat board has a smaller host command range than the ITE/Nuvoton ECs used on other Fatcat variants. The `gen1_dec` register in the devicetree is updated to reflect this change. As per boot log, the `gen1_dec` aka offset 0x84, base address is 800 and size is 8 bytes. AP FW Boot log: [SPEW] PCI: 00:00:1f.0 resource base 800 size 8 align 0 gran 0 limit 0 flags c0000100 index 84 BUG=b:376207365 TEST=Able to build and boot google/fatcat w/o any error. without this patch: [SPEW ] LPC: Trying to open IO window from 800 size 8 [ERROR] LPC: Cannot open IO window: 800 size 8 [ERROR] No more IO windows with this patch: [SPEW ] LPC: Trying to open IO window from 800 size 8 Change-Id: Ifcee533341fa583d841a4b564f25831c6d04e951 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84919 Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pranava Y N <pranavayn@google.com> Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
2024-10-30soc/intel/pantherlake: Populate and pass DRAM info for SMBIOSSubrata Banik
This patch implements the `save_dimm_info()` API to populate and pass DRAM-related information to the next stage. This information is used to generate the SMBIOS memory table, providing details about installed DIMMs. This addresses the issue where SMBIOS lacked detailed DIMM information. Verified that `dmidecode` correctly dumps the DIMM information from the SMBIOS table after this change. BUG=b:376103463 TEST=Built and booted successfully. Verified DIMM info in SMBIOS using `dmidecode`. > dmidecode -t 17 ``` Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x000B, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 16 bits Data Width: 16 bits Size: 2 GB Form Factor: Row Of Chips Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: LPDDR5 Type Detail: Unknown Synchronous Speed: 6400 MT/s Manufacturer: Hynix Serial Number: 00000000 Asset Tag: Channel-0-DIMM-0-AssetTag Part Number: H58G56BK7BX068 Rank: 1 Configured Memory Speed: 6400 MT/s Minimum Voltage: 0.5 V Maximum Voltage: 0.5 V Configured Voltage: 0.5 V ... ... Handle 0x0012, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 16 bits Data Width: 16 bits Size: 2 GB Form Factor: Row Of Chips Set: None Locator: Channel-3-DIMM-0 Bank Locator: BANK 0 Type: LPDDR5 Type Detail: Unknown Synchronous Speed: 6400 MT/s Manufacturer: Hynix Serial Number: 00000000 Asset Tag: Channel-3-DIMM-0-AssetTag Part Number: H58G56BK7BX068 Rank: 1 Configured Memory Speed: 6400 MT/s Minimum Voltage: 0.5 V Maximum Voltage: 0.5 V Configured Voltage: 0.5 V ``` Change-Id: I3b942610272de401589ee0463de9cd0985974774 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pranava Y N <pranavayn@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-10-30soc/intel/pantherlake: Add ACPI names for missing devicesSubrata Banik
This patch adds ACPI names for the following devices: - THC0 (PCI: 00:10.0) - THC1 (PCI: 00:10.1) - SRAM (PCI: 00:14.2) - FSPI (PCI: 00:1f.5) TEST=Able to build and boot google/fatcat without any error. w/o this patch: [ERROR] Missing ACPI Name for PCI: 00:10.0 [ERROR] Missing ACPI Name for PCI: 00:10.1 [ERROR] Missing ACPI Name for PCI: 00:14.2 [ERROR] Missing ACPI Name for PCI: 00:1f.5 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I474089607522a4bd13375cc34b8f8645ca3663d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84910 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-10-30soc/intel/pantherlake: Set SMBUS device ACPI min sleep state as D0Subrata Banik
This change sets the SMBUS device to min sleep state D0 in the ACPI sleep state table. TEST=Able to build and boot google/fatcat. w/o this patch: [WARN ] Unknown min d_state for PCI: 00:1f.4 w/ this patch: No Error or Warning. Change-Id: If84d2ee8abfef34f6411e01e6c37d4e2008a3666 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84909 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-10-30mb/google/fatcat: Define EC_SYNC_IRQ and GPIO_PCH_WP for variantsSubrata Banik
This commit defines the EC_SYNC_IRQ and GPIO_PCH_WP macros for different Fatcat variants. The EC_SYNC_IRQ macro is used for tight timestamps and wake support, while the GPIO_PCH_WP macro is used for the WP signal to the PCH. These macros were previously undefined or incorrectly defined for some variants. This commit fixes these issues and ensures that the macros are defined correctly for all variants. Specifically, this commit: - Defines EC_SYNC_IRQ and GPIO_PCH_WP for Fatcat Nuvo and Fatcat ITE. - Defines EC_SYNC_IRQ as 0 (not connected) for Fatcat. - Defines GPIO_PCH_WP as GPP_D02 for Fatcat. - Leaves EC_SYNC_IRQ and GPIO_PCH_WP as 0 (TODO) for Francka. TEST=Able to build and boot google/fatcat. w/o this patch: ``` cros_ec_lpcs GOOG0004:00: couldn't retrieve IRQ number (-22) cros_ec_lpcs GOOG0004:00: probe with driver cros_ec_lpcs failed with error -22 ``` w/ this patch: ``` cros_ec_lpcs GOOG0004:00: Chrome EC device registered ``` Change-Id: I9bd248496f08869c08cf6daafeed6584d0b166b7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pranava Y N <pranavayn@google.com>
2024-10-30mb/google/fatcat: Ensure RW_SECTION_B at 16MB boundary for debug FMDSubrata Banik
This patch updates the flash map layout to guarantee that the RW_SECTION_B section starts at the 16MB boundary. Additionally, fix typo in flash descriptor comment, where comment incorrectly referred to "MTL" instead of "PTL". TEST=Successfully builds google/fatcat. Change-Id: Ia6dba611fba50f9694a75670d954a4630cde4d70 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84899 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-10-29tree: Fix cast an object of type 'nullptr_t' to 'uintptr_t' errorElyes Haouas
This to fix the error when using C23: cannot cast an object of type 'nullptr_t' to 'uintptr_t' (aka 'unsigned long') return (uintptr_t)NULL; ^ Change-Id: Ibdc8794513a508fc61a5046692f854183c36b781 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-10-28uncore_acpi: Clean up resource codePatrick Rudolph
Use the resource size to determine Vtd BAR size and drop the code to calculate the Vtd BAR size. While on it do not truncate the resource address to 32-bit, since the DMAR entry is 64-bit wide anyway. TEST: Booted on intel/archercity_crb Change-Id: Ibaadc25c44345ba2eb9e6f75989d32b43d00d7a5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-10-28soc/intel/xeon_sp: Fix iiostack.aslPatrick Rudolph
Align DSDT names with SSDT naming scheme, as provided by iio_domain_set_acpi_name() and hide unused devices by implementing the _STA method as done on newer platforms. Change-Id: I8488907f28a78a6f71046dba54ba9cbd4b0652eb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-10-28soc/intel/xeon_sp: Add SAD PCI driverPatrick Rudolph
Get rid of some helper functions by properly using a pci_driver. Configure SAD if necessary and lock SAD if necessary in the newly added SAD PCI driver. This allows to drop lock_pam0123(), unlock_pam_regions() and socket0_get_ubox_busno(). - Fixes SAD instance on secondary sockets not decoding the C-F segments as DRAM, which would prevent those sockets to access the ACPI/SMBIOS table anchor - Adds PCI multi segment support (SKX and CPX only, other were working properly already) - Moves locking of PAM0123_CSR and PAM456_CSR from SoC to driver code Change-Id: I167b6ce48631fe3f97359ee33704f52ca854dbd1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84794 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-10-28lib/smbios: Improve Type9Patrick Rudolph
Set characteristics 1 based on slot type and scan PCI capabilities to update the characteristics 2 field in SMBIOS type 9 accordingly. Change-Id: If96e0381b10c25cf73b3797a0f02a40dc933993e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
2024-10-28pci: Add method to read PME capabilityPatrick Rudolph
Add a helper method to read the PME capability. Will be used in the following commit. Change-Id: Id1fdc98c9ce86d3ddf8056bb609afc58008cf2e9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84793 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-28soc/amd/common/psp: add RPMC provisioning codeFelix Held
Add the code to request the provisioning of the RPMC root key from the PSP. When RPMC hasn't already been provisioned enabled and the PSP has detected a SPI flash chip that both supports RPMC and has monotonic counters that can still be provisioned, we send the PSP mailbox command to request the RPMC provisioning and then reset the system, so the PSP can do the actual provisioning. TEST=On an out of tree AMD reference board using the Cezanne SoC code, provisioning RPMC works as expected when selecting the corresponding PERFORM_RPMC_PROVISIONING Kconfig option: 1st boot to initiate the RPMC provisioning: [DEBUG] PSP: Querying PSP capabilities...OK [DEBUG] PSP: Querying HSTI state...OK [SPEW ] RPMC isn't provisioned [SPEW ] SPI flash supports RPMC [SPEW ] RPMC revision 0 [SPEW ] PSP NVRAM isn't healthy [SPEW ] PSP NVRAM is using RPMC protection [SPEW ] SPI flash RPMC counter 0 can still be provisioned [SPEW ] SPI flash RPMC counter 1 can still be provisioned [SPEW ] SPI flash RPMC counter 2 can still be provisioned [SPEW ] SPI flash RPMC counter 3 can still be provisioned [SPEW ] SPI flash RPMC counter 0 is in use [SPEW ] SPI flash RPMC counter 1 is not in use [SPEW ] SPI flash RPMC counter 2 is not in use [SPEW ] SPI flash RPMC counter 3 is not in use [SPEW ] SoC RPMC slot 0 can still be provisioned [SPEW ] SoC RPMC slot 1 can still be provisioned [SPEW ] SoC RPMC slot 2 can still be provisioned [SPEW ] SoC RPMC slot 3 can still be provisioned [DEBUG] RPMC: perform fusing using RPMC counter address 0 [DEBUG] OK [NOTE ] RPMC: Rebooting [INFO ] warm_reset() called! 2nd boot after the provisioning is done: [DEBUG] PSP: Querying PSP capabilities...OK [DEBUG] PSP: Querying HSTI state...OK [SPEW ] RPMC is provisioned [SPEW ] SPI flash supports RPMC [SPEW ] RPMC revision 0 [SPEW ] PSP NVRAM isn't healthy [SPEW ] PSP NVRAM is using RPMC protection [SPEW ] SPI flash RPMC counter 0 has already been provisioned [SPEW ] SPI flash RPMC counter 1 can still be provisioned [SPEW ] SPI flash RPMC counter 2 can still be provisioned [SPEW ] SPI flash RPMC counter 3 can still be provisioned [SPEW ] SPI flash RPMC counter 0 is in use [SPEW ] SPI flash RPMC counter 1 is not in use [SPEW ] SPI flash RPMC counter 2 is not in use [SPEW ] SPI flash RPMC counter 3 is not in use [SPEW ] SoC RPMC slot 0 has already been provisioned [SPEW ] SoC RPMC slot 1 can still be provisioned [SPEW ] SoC RPMC slot 2 can still be provisioned [SPEW ] SoC RPMC slot 3 can still be provisioned Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia7760c0bf7618ca60ef160329d0110ac8109032a Reviewed-on: https://review.coreboot.org/c/coreboot/+/84707 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 21:00:38 +0000