| Age | Commit message (Collapse) | Author |
|---|
|
Use fw_config to probe lte.
BUG=b:283199751
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I5596f3536b0a21453f89e67615acabbbf6a8409b
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75337
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use fw_config to probe touchpad.
BUG=b:283199751
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ib20abac74683c670c174821b821ede461dbb0163
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Enable touchpad for Google Screebo.
BUG=b:278160238
BRANCH=none
TEST=Build and boot to Google Screebo. Verify touchpad works.
Change-Id: Ib83e5ef5ca497592f5a26aa1e85d793d06d9dd7f
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75412
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The CS42L42 low power audio codec can be connected over SoundWire and
be configured for mainboards to use:
- Data Port 0 and Bulk Register Access
- Data Port 1 is the 64bit data output for the headset
- Data Port 2 is the 64bit data input for the headset
- Data Port 3 is the 64bit data input for the headset
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 0 and has strap
settings configuring it for unique ID 0.
chip drivers/soundwire/cs42l42
register "desc" = ""Headset Codec""
device generic 0.0 on end
end
This driver was tested with the rex0 reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW00)
{
Name (_ADR, 0x00001001FA424200) // _ADR: Address
Name (_DDN, "Headset Codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioInt (Edge, ActiveBoth, Exclusive, PullDefault, 0x0000,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0166
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0167
}
})
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "irq-gpios",
Package () { \_SB.PCI0.HDAS.SNDW.SW00, Zero, Zero, Zero }
},
Package () { "reset-gpios",
Package () { \_SB.PCI0.HDAS.SNDW.SW00, One, Zero, Zero }
},
Package () { "cirrus,ts-inv", One },
Package () { "cirrus,ts-dbnc-rise", 0x05 },
Package () { "cirrus,ts-dbnc-fall", Zero },
Package () { "cirrus,btn-det-init-dbnce", 0x64 },
Package () { "cirrus,btn-det-event-dbnce", 0x0A },
Package () { "cirrus,bias-lvls",
Package () { 0x0F, 0x08, 0x04, One }
},
Package () { "cirrus,hs-bias-ramp-rate", 0x02 },
Package () { "cirrus,hs-bias-sense-disable", One },
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
Package () { "mipi-sdw-source-port-list", 0x02 },
Package () { "mipi-sdw-sink-port-list", 0x0C }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" },
Package () { "mipi-sdw-dp-0-subproperties", "DP0" },
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" },
Package () { "mipi-sdw-dp-2-sink-subproperties", "SNK2" },
Package () { "mipi-sdw-dp-3-sink-subproperties", "SNK3"}
}
})
Name (BRA0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-bra-mode-bus-frequency-configs",
Package () { 0x00AC4400, ... }
},
Package () { "mipi-sdw-bra-mode-max-data-per-frame", 0x1000 },
Package () { "mipi-sdw-bra-mode-min-us-between-transactions", Zero }
}
})
Name (DP0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-port-max-wordlength", 0x40 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }
}
})
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00AC4400, ... }
},
Package () { "mipi-sdw-audio-mode-max-sampling-frequency", 0x0002EE00 },
Package () { "mipi-sdw-audio-mode-min-sampling-frequency", 0x1F40 },
[...]
}
})
Name (SRC1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
Name (SNK2, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
Name (SNK3, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
}
BUG=b:269497731
TEST=Verified SSDT for SNDW in the OS
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic7cfe2a21c76ba01ad3dea2a5017b28743aeb9f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73279
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MAX98363 smart speaker amp can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is not supported
- Data Port 1 is the 32bit data input for the speaker path
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 2 and has strap
settings configuring it for unique ID 0.
chip drivers/soundwire/max98363
register "desc" = ""Left Speaker Amp""
device generic 2.0 on end
end
This driver was tested with the rex0 reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW20)
{
Name (_ADR, 0x000230019F836300) // _ADR: Address
Name (_DDN, "Left Speaker Amp") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
Package () { "mipi-sdw-source-port-list", Zero },
Package () { "mipi-sdw-sink-port-list", 0x02 }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" }
}
})
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00927C00, ... }
},
Package () { "mipi-sdw-audio-mode-sampling-frequency-configs",
Package () { 0x3E80, ... }
},
[...]
}
})
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
}
BUG=b:269497731
TEST=Verified SSDT for SNDW in the OS
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ie56109d615759e3e5e32782c8782cb2f47014ec4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73278
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement PS0 and PS3 methods to support xHCI clock gating in S0ix
suspend and resume.
BUG=b:283989367
TEST=S0iX test passed
Change-Id: Ia5b72b81fd1c0d0b7b90f8d9cbf6ef4aa9da9743
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The PCI config space access via IO ports uses two 32 bit IO ports.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie99b4f5fc01fb0405243ff108d813ee1a3d35e5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75408
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changes: https://acpica.org/node/202
Change-Id: I43fc180bd51ff7cb06a67619c8350d28b086bc90
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
BUG=b:276988831
Platform=Rex
Test= inteltool -k
============= Dumping INTEL Key Locker status =============
Key Locker supported : YES
AESKL instructions enabled : YES
===========================================================
Also,
No S0ix issue seen, no impact on power just with this coreboot patch, no stability issue seen.
Boot time delta (using cbmem -t):
Without this CL:
963:returning from FspMultiPhaseSiInit 1,299,043 (98,480)
With this CL:
963:returning from FspMultiPhaseSiInit 1,324,659 (121,995)
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I9919f44623972d7bbae4a9b886e1da4ac7879c98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71120
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Now -mno-mmx is statically set in arch/x86 so remove this option.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I0da7f9f1afb0c8ecae728c45591897ca1d4dfb11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Even though coreboot does not allow floating point operations some
compilers like clang generate code using hw floating point registers,
e.g. SSE %XMMx registers on 64bit code by default. Floating point
operations need to be enabled in hardware for this to work (CR4). Also
in SMM we explicitly need to save and restore floating point registers
for this reason. If we instruct the compiler to not generate code with
FPU ops, this simplifies our code as we can skip that step.
With clang this reduces the binary size a bit. For instance ramstage for
qemu/Q35 drops from 216600 bytes decompressed to 212768.
TEST: See that with x86_64 bit and clang coreboot reaches the payload
without setting the CR4_OSFXSR bit in CR4. Without this change it would
bootloop very early in the bootblock on Qemu Q35.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ib8590c55e7aed1ece2aa23b8ea99463396435e11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75316
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit f99d6700 ("mb/google/skyrim/var/winterhold: Fix USB port ACPI
generation") fixed the USB-A ports being double-nested, but neglected
to move the chip driver registers up into the correct scope. While the
generated ACPI is still correct, fix the register scope anyway to
avoid confusion.
BUG=b:283778468
BRANCH=skyrim
TEST=build/boot winterhold, dump ACPI, verify unchanged
Change-Id: Ia9982fed0fe2093d787ee9506ac5bbadd6cc03f9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75389
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Commit d81ee3f1 ("mb/google/skyrim/var/markarth: Fix USB port ACPI
generation") fixed the USB-A ports being double-nested, but neglected
to move the chip driver registers up into the correct scope. While the
generated ACPI is still correct, fix the register scope anyway to
avoid confusion.
BUG=b:283778468
BRANCH=skyrim
TEST=build/boot markarth, dump ACPI, verify unchanged
Change-Id: I5c1cd23c49b512f55e9e13b2164d30dfb7fb682d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75388
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Commit a539893c ("mb/google/skyrim/var/frostflow: Fix USB port ACPI
generation") fixed the USB-A ports being double-nested, but neglected
to move the chip driver registers up into the correct scope. While the
generated ACPI is still correct, fix the register scope anyway to
avoid confusion.
BUG=b:283778468
BRANCH=skyrim
TEST=build/boot frostflow, dump ACPI, verify unchanged
Change-Id: I3912fe1b7d3f2a07cb379928cd4f5d87100d3284
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75387
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch adds an enum macro to define the different SaGv work points.
The enum macro is named `sagv_wp_bitmap` and it has three values:
The goal is to choose the optimal SaGv work point for the target
platform after considering the two inputs as power consumption and performance. The first group is for workloads that require high performance, even if it means consuming more power. The second group
is for workloads that can tolerate lower performance, in order to save
power.
SAGV_POINTS_0_1: The highest power consumption, but also the highest
performance.
SAGV_POINTS_0_1_2: A lower power consumption than work point
SAGV_POINTS_0_1, but also a lower performance.
SAGV_POINTS_0_1_2_3: The lowest power consumption, but also the lowest
performance.
Set SaGv work points after reviewing the power and performance impact
with SaGv set to 1 (Enabled) and various considering various work points
between 0-3 being enabled.
BUG=b:267879107
TEST=Able to build google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4af0038f2799a458d1b006270068341f65d36609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75362
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch overrides `SaGv` FSP-M UPD to enable SaGv feature to be
able to train memory (DIMM) at different frequencies.
On all latest Intel based platforms SaGv is expected to be enabled
to support dynamic switching of memory operating frequency.
BUG=b:267879107
TEST=Able to verify SaGv is enabled with 3 work point (0, 1 and 2)
and MRC retraining takes around ~20ms extra compared to SaGv being
disabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic680bfeab4dd285c0d3916ba5e917cc12bae3284
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73534
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds `SaGvWpMask` UPD into the FSP header.
This information is required to set the SaGv work endpoint.
BUG=b:283746904
TEST=Able to build google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If39da58c927cc7b28b46063576f8e246ef9596d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75361
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
A directory for tarballs is needed in any case but it's created at build
time. However, in reproducible build environments the sources are
downloaded before the buildgcc scripts runs and the directory needs to
be created.
Thus, to simplify that, add an empty tarballs directory.
Change-Id: Id3b4bf918c93f10c145f580684e916a4f8bae3b1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
SKU1A C0 has no redriver, so enable SBU muxing in the SoC.
BUG=b:283044004
BRANCH=none
TEST=Voltages are correct on the C0 and C1 AUX bias pins
Change-Id: I18b4ade2c60c270855fb2e733a9201539e08d8ba
Signed-off-by: mike <mike5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Enabling BT for screebo project
BUG=b:278169273
TEST=Check whether BT can connect to Bluetooth device
Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com>
Change-Id: I0ecd62abfbe751e1036948b1490844e7e63d7f0d
Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75352
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This is a PSP FW requirement.
This is only for recovery A/B without ISH header. That means only
Cezanne.
Change-Id: I62616d5a866f66fc71e6c0b31a23c62dc11cf3c6
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Hades uses the SODIMM, enable the smbus to see the SPD address for the
memory.
BUG=b:283138024
TEST=i2cdetect -l can see the smubs adapter.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I3912a025afaf8388d04a4b08852a84d4a2a6bf06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75399
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Compiler builtins depend on certain CPU features flags to be passed to
the compiler. This may have unwanted side effects as generating code
with FPU registers. Instead use native coreboot code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4e92d103fa3a6c7a56e813a583b3262676969669
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The payload API of coreboot described in
https://www.coreboot.org/Payload_API does not reflect the current
handoff mechanism to hand the coreboot tables off. Therefore the
arguments supplied by coreboot (cbtable) will currently never be parsed
correctly and libpayload has to search for the coreboot tables by
iterating through memory.
This patch removes the old payload API implementation and just takes the
coreboot table pointer from the first argument on the stack.
Tested: started prodrive/atlas with coreinfo payload
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I51fb0cfc81043cbfe3fc9c8ea0776add2d6a42b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74965
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add CPU PortID for GPIO communities in order to calculate
IOM Aux Bias data correctly.
BUG=b:283044004
TEST=able to detect external display
Signed-off-by: Marx Wang <marx.wang@intel.com>
Change-Id: I79f27fb0b6bde0a4ce2466eaf707166a952fad81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Add devicetree and Kconfig entries to enable additional configuration
of the Pericom PI7C9X2G608GP PCIe switch on this board variant.
The amplitude is being adjusted to 425 mV and de-emphasis level to
6.0 mV.
BUG=none
TEST=Read out the PCIe config space values of the switch and check if
they match with the ones configured over SMBus.
Change-Id: I11459f0794278ad614aa6e16c56df1ad578fe2f8
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
To improve the rate of data transfer for PCIe root port #2 (00:1c.1) and
root port #3 (00:1c.2) set the max payload size to 256 bytes for both
root ports.
Change-Id: I553f6cf090d799fbbaafb925646c6566d6951a86
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75127
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
The data payload size of PCIe root ports can be set to either 128
(default) or 256 bytes. A bigger payload size can improve PCIe data
throughput on the given port. FSP-S provides a parameter to configure
this value.
This patch provides a chip config so that this FSP parameter can be set
as needed in the devicetree on mainboard level.
Change-Id: I5798a72adaa8089dda0b4bc12266b5a235ed4aa3
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Use fw_config to probe touchscreen.
BUG=b:283199751
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I5d8129b3af3aa09e5bc31160de82d9ef7af0dd59
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Override the weak function mainboard_ewl_check() and select OCP_EWL.
Select IPMI_KCS_ROMSTAGE and IPMI_OCP for OCP IPMI commands which are
needed for OCP EWL driver, but they are Meta-specific BMC commands
and don't really work for AC, this change is just for a demonstration
with AC.
Note that FSP UPD promoteWarnings needs to be disabled so that
FSP won't block and can return to coreboot for EWL processing
when memory EWL type 3 error occurs.
Tested=On Intel AC, connected with a faulty DIMM can see
EWL type 3 error being generated and halted with coreboot log:
[DEBUG] Number of EWL entries 3
[ERROR] EWL type: 3 size:32 severity level:1
[ERROR] Major Warning Code = 0x29, Minor Warning Code = 0x04,
[ERROR] Major Checkpoint: 0xb7
[ERROR] Minor Checkpoint: 0x74
[ERROR] Socket 0
[ERROR] Channel 4
[ERROR] Dimm 0
[ERROR] Rank 0
[ERROR] IPMI: ipmi_get_board_config command failed (ret=3 resp=0xc1)
[DEBUG] ipmi send memory training error
[DEBUG] EWL type: 1 size:19 severity level:1
[DEBUG] 0x6392e968: 01 00 00 00 13 00 01 00 00 00 b7 74 0a 03 00 04
[DEBUG] 0x6392e978: 00 00 00
[DEBUG] EWL type: 1 size:19 severity level:1
[DEBUG] 0x6392e97b: 01 00 00 00 13 00 01 00 00 00 b7 74 0a 03 00 04
[DEBUG] 0x6392e98b: 00 00 01
[EMERG] Memory Training Error!
Change-Id: I4602ae356aa6e55ed0611b8ac9a206db127c297c
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
If Fastboot is enabled, the next boot will skip MRC and won't be able
to detect MRC error via EWL and still continues booting. Enforce FSP
MRC training in the next boot.
Change-Id: I9dee0472f8e2602cecf88c6d00dec0bf02b9f7bd
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
1. Rename set_cmos_mrc_cold_boot_flag() to soc_set_mrc_cold_boot_flag
in case a certain platform may not support this via CMOS data, and
the function could in turn calls mainboard defined method in the
future. Move the code into soc_util.c.
2. Remove redundant static get_system_memory_map() from cpx/romstage.c
and call the soc_util.c one.
Change-Id: Ib7d9bed9092814658f4a0b1d6dcf3c7d79178048
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add PCI IDs to support Raptor Point PCH.
Ref: Intel 700 Series PCH Datasheet, Volume 1 (#743835, rev 2)
Change-Id: Iee410ed3179260b08d45f50e8126fb815c686324
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73437
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The overridetree definitions for the USB ports wrongly double-nested
the ports, causing the generated SSDT to be incorrect, leading to
an error in dmesg:
ACPI BIOS error (bug): Could not resolve symbol \
[\_SB.PCI0.GP41.XHC1.RHUB.HS02.HS03], AE_NOT_FOUND
BUG=b:283778468
BRANCH=skyrim
TEST=untested, but same error/fix as frostflow variant.
Change-Id: Ic498afcc8b8e0224f344f405e2f1ef6184df1d6b
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75340
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The comment got stale because a few elements from the struct got
dropped.
Change-Id: I83469e24dfab82b9182accb549960dd06d81e02f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
%ebp is used for the stack frame on which the fxrstor address is pushed.
entry64.inc does not trash it so that's fine.
Change-Id: If027437dccac9ad507ceb534c6aae77ea43bdfda
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68896
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The overridetree definitions for the USB ports wrongly double-nested
the ports, causing the generated SSDT to be incorrect, leading to
an error in dmesg:
ACPI BIOS error (bug): Could not resolve symbol \
[\_SB.PCI0.GP41.XHC1.RHUB.HS02.HS03], AE_NOT_FOUND
BUG=b:283778468
BRANCH=skyrim
TEST=untested, but same error/fix as frostflow variant.
Change-Id: Ie40541ada508acfa5771ea800249b8a57b168e3b
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75339
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The overridetree definitions for the USB ports wrongly double-nested
the ports, causing the generated SSDT to be incorrect, leading to
an error in dmesg:
ACPI BIOS error (bug): Could not resolve symbol \
[\_SB.PCI0.GP41.XHC1.RHUB.HS02.HS03], AE_NOT_FOUND
BUG=b:283778468
BRANCH=skyrim
TEST=build/boot frostflow, verify error no longer present in dmesg.
Change-Id: I0b87af6b2c04f9354e6f394a8f987fa660e49134
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75338
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Change-Id: I753bbcf3f03907b0cf966454c3dd6c9b61869599
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Generate the RAM ID for Samsung K3KL6L60GM-MGCT.
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 6 (0110)
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I05a2cd5f2235702dea8fd706349ebda6a9ffa2ef
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This change updates Intel Copyright License for all header files
under Sapphirerapids dir
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ib04988194e5fe9515bea8620318eadff36f92181
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add `ramtop` to CMOS layout so SOC_INTEL_COMMON_BASECODE_RAMTOP
can be used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I88128d2c62bdc3246a3f30e768c353f0fe3faeb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This is needed to support 9-series PCH-H (e.g. Z97) and Broadwell
non-ULT CPUs (for which more magic is required).
Tested on Asrock Z97 Extreme6: Boots, but ME has to be disabled so that
the system remains on after 30 seconds. Apparently, something Broadwell
MRC.bin does results in the ME being unhappy, as there is no such issue
when not using MRC.bin at all (native RAM init). S3 resume is working.
Change-Id: I7b33660099fa75c5ad46aeeda17b1215729f96c3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
BUG=b:282912666
TEST=set and unset bit20 in HW_CONFIG and check if VPU(0b.0)
is enabled when bit20 is set, and disabled when cleared
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Iee6a9026a4d210407350bfb7ecc8a058e7ff5c24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
TEST=set the corresponding cbi bit, and saw SPI0 under sysfs
BUG=b:278783755
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I7099cde14cff90ad63e9164769f9913a8284a805
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
According to Thermal table 0518, adjust DPTC and STT settings.
BRANCH=none
BUG=b:273636128
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the thermal team has verified.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Id1c1884eabc1ea58148270f39eaca836ccc3fb54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Remove duplicated definitions of ARRAY_SIZE macro across util/ dir.
Instead of duplicates, use the one from commonlib/bsd/helpers.h file.
BUG=b:231765496
TEST=make -C util/cbfstool; make -C util/cbmem;
make -C util/intelmetool; make -C util/superiotool
Change-Id: I29b776586b4f0548d4026b2ac77095791fc9f3a3
Signed-off-by: Konrad Adamczyk <konrada@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74474
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Grzegorz Bernacki
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The board needs this setting to boot.
Change-Id: I7f507c2478b63daf891430e95b008747b9b95a51
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Earlier the entire SPI ROM is mapped at the start of verstage and then
unmapped at the end of verstage. With CB:74606, this behavior has
changed. So unmap the hash table CBFS file after usage.
BUG=b:240664755
TEST=Build and boot to OS in Skyrim. Perform cold, warm reboots and
suspend/resume cycles for 50 iterations each. Ensured that there is no
impact to boot time.
Change-Id: I5c605f8ba8bbd571b589b3cdf91e9cc71d711c1c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75092
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently the SPI ROM is mapped completely when the boot device is
initialized. That mapping remains active throughout the execution time
of PSP verstage. Every 1 MiB of mapped SPI ROM region consumes 1 TLB
Slot in PSP for use during memory mapped or DMA access. With 16 MiB of
mapped SPI ROM + FCH devices + 4 reserved TLB slots, 31 out of 32 total
TLB slots is consumed. This leaves almost no scope for future expansion.
With upcoming programs possibly using 32 MiB SPI ROM, PSP will run out
of TLB slots to support 32 MiB.
Hence instead of mapping the entire SPI ROM upfront, get the SPI ROM SMN
address during the boot device initialization. Update the boot device
region operations to map and unmap the SPI flash with the desired offset
and size using the SVC call. Then anytime a memory mapped SPI ROM access
is performed: map the required area, read the data and immediately unmap
the area. There is no update required when using CCP DMA, since the
concerned SVC call performs mapping and unmapping of the required SPI
flash area implicitly.
With these changes, maximum of 8 slots(size of RO section) might get
used at any point in time during the PSP verstage execution.
BUG=b:240664755
TEST=Build and boot to OS in Skyrim. Perform cold, warm reboots and
suspend/resume cycles for 50 iterations each. Ensured that there is no
impact to boot time.
Change-Id: Icd44ea7b2a366e9269debcab4186d1fc71651db2
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74606
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add sending Meta's BMC SEL for memory training error occurred in EWL
type 3 error.
The detail definition of EWL (Enhanced Warning Log) can be found in the
specification document -- BIOS Data ACPI Table (BDAT) Interface
Specification v4.0 Draft 5:
https://uefi.org/sites/default/files/resources/BDAT%20Specification%20v4.0%20Draft5_0.pdf
Change-Id: I664e9d3da7910b47260881c0df64159c8dbe2dca
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69147
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Gazelle 18 (gaze18) is a Raptor Lake-H board.
Tested with a custom TianoCore UefiPayloadPkg.
Working:
- PS/2 keyboard
- I2C HID touchpad
- Both DIMM slots
- M.2 NVMe SSD slot
- M.2 SATA SSD slot
- All USB ports
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio
- 3.5mm microphone input
- S3 suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.2.6
Not working:
- Discrete/Hybrid graphics
Change-Id: I4599bf12c0f3048f9328f336cc8971400f5fd1a0
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Currently unsigned PSP verstage binary is copied from ELF file only when
required in amdfw*.rom. If a signed PSP verstage binary is supplied
while building amdfw*.rom, then it is dropped. Copy the unsigned PSP
verstage binary always so that it can be used for signing directly from
the CI build infrastructure instead of a locally built binary.
BUG=None
TEST=Build Skyrim BIOS image and ensure that the unsigned PSP verstage
is part of the build artifacts.
Change-Id: If797dcfd20aa2991f3517904ef862406b9b9875c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75334
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pujjoteen5 support WWAN 5G device, use variant.c to handle the
power on sequence.
BUG=b:279835626
TEST=Build and check WWAN 5G power on sequence.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I7dc72f2c705bcb41745f4bf08bef286773fe8b13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75327
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Measured the I2C frequency meets spec
1. I2C0 (TPM): 976.1 Khz
2. I2C1 (TouchScreen); 394.0 Khz
3. I2C2 (WCAM); 377.9 Khz
4. I2C3 (Audio): 390.0 Khz
5. I2C5 (Touchpad): 389.3 Khz
BUG=b:283374537
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
and check all I2C devices measurement result
Change-Id: If6e3a4a2b1ac642561015a290e6579238c3c2b1b
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Set the DmaProperty in the device's _DSD so that the OS can treat the
device as untrusted.
BUG=b:278310256
TEST=cat /sys/bus/pci/devices/<wifi>/untrusted == 1
iperf3 -c <iperf3-server> -t 60 (No performance regressions seen)
Change-Id: I06369a19afa5b881b26f5c1eb243e2db41a9bb36
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75095
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Show an error if an option table is used, and the ramtop entry is not
defined on a platform that uses it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie48f0766b29be8e1fb0c1f71c4b2ce6ed20e6207
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
CB:37152 was supposed to be uprev to Linux's kconfig, but it got this
one case wrong, Linux never returned "0" [1]. As a result, when an
option has default value different than 0, and it was changed to 0,
savedefconfig skips saving it. However, during the build from such
defconfig the option is assigned default value.
TEST=Set SEABIOS_DEBUG_LEVEL to 0 and see that savedefconfig writes
it to defconfig file.
[1] https://github.com/torvalds/linux/commit/7cf3d73b4360e91b14326632ab1aeda4cb26308d
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Change-Id: I821e45dcec99904fab85f136298cbd0315237ff6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72650
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
During the cleanup of copyright lines, this file was incorrectly changed
to remove the copyright line. It is not originally a part of the
coreboot project, having been pulled in and adapted for use in coreboot.
As such, and with the ISC license specifying that the copyright line
should be maintained, the copyright line has been restored.
See coreboot ticket # 479 for more information.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia234cebd0a6d49d03e40c5a57cd346a07f3e4b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Set all GPIOs to their target functions and do not depend on FSP to
configure them. The board support has stabilized and was tested with
many PCIe devices. There is no need to detect CLKREQ signals so we may
hardcode them.
TEST=Boot MSI PRO Z690-A DDR4 to Linux and check if all ASPM and Clock
PM features' state on PCIe root ports are the same before and after
the change.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I01dc83ce23ca27525b8905665da942510f249824
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Disable backlight before turning on bridge, otherwise the bridge will
initialize failed.
Fixes: d5c1e1(mb/google/corsola: Add support for MIPI panel)
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I7d10bf9e8675b2fb03bfd1e294af66207b9b0620
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75354
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
BUG=b:278156430
TEST=verify the fingerprint on screebo
Change-Id: I986e470b28145f7b17427e794055929a4283c721
Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75287
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The upstream kernel privacy screen driver uses HID GOOG0010 to look for
firmware node to use. This method is used on other boards, e.g. redrix.
See: drivers/platform/chrome/chromeos_privacy_screen.c in linux sources.
Update jinlon gfx ACPI node to work with that.
BUG=b:279092050
TEST=privacy protection screen works with 5.15 and 4.19 kernels
Change-Id: Icba41e7f2be7292f713fea10dbe69b3ca128bde7
Signed-off-by: Kornel Dulęba <korneld@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75289
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Disable unused gpio for LTE daughter board, WFC and stylus.
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I6cc61321cd96a10dd34ff6cd9fcabe85a64bbfa9
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75293
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The support for the board has stabilized and PCIe ports have been
tested with many devices. Although hotplug is not commonly used
and it seems pointless to keep it enabled, so disable it.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I338c55cb57d971badd08235b71626a710fafb829
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The Bochs graphics adapter remaps the legacy VGA ioports
(0x3c0 -> 0x3df) to its MMIO region at offsets 0400 - 041f.
Currently bochs_vga_write() calculates a wrong offset when
accessing these ioports, which causes the boot splash image
not displayed when using the legacy-free pci variant of the
Bochs graphics adapter.
TEST=Build coreboot for QEMU x86 i440fx with a boot splash image
included, boot coreboot.rom with QEMU with '-device secondary-vga'
and verify the boot splash image is correctly displayed.
Fixes: efaf1b32ba1e ("drivers/emulation/qemu/bochs: Rewrite driver")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Change-Id: I4acc71e3d6ef5161ab62e6714c94b7643c4c0972
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75146
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The named choice isn't needed here, so get rid of it. This fixes the
build notice:
build/auto.conf:notice: override:reassigning to symbol LAPIC_ACCESS_MODE
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I70628007319a0ee2830dc4c9cb3b635d8190264b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75133
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Select INTEL_GMA_HAVE_VBT so VBT files are added by default. This board
has two specific VBT files that are hard-coded in the Makefile. Hence
set an empty INTEL_GMA_VBT_FILE string.
Change-Id: I0508c8016da06b401d6fbefd6e5cec1af018a5c8
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Reformat the string, fix whitespace, add single-quote before
genitive `s`, and correct the GPU tool name `intel_reg`.
Change-Id: I277603063806927837867a454ae0875578228109
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
There is only a single place where we need the LVDS EDID string. Let's
call gm45_get_lvds_edid_str() right there. This simplifies the API and
helps to follow the execution flow.
The function is moved to avoid a forward declaration.
Change-Id: I86f3a88e6b661bcf60319edbe301e70304924727
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This is how res2mmio() is supposed to be used and there was no other
use of the `mmio` variable left anyway.
Change-Id: Ifa4645bcc9ae971966587d9b67662b9dc8bae3d0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The PCI resource should only be probed as part of the device
.init process. We can simply do that first and know that we
can use the global `gtt_res` from then on.
This simplifies the signature of gm45_get_lvds_edid_str(), and
makes changes to the API user (lenovo/x200) necessary.
Change-Id: I6c96f715abfa56dcb1cd89fde0fbaef3f1cb63ae
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch adds an API to check FSP reset pending requests. This
information is useful to understand if FSP would like boot firmware to
issue any reset to complete the silicon initialization.
As per recent debug it has been found that, FSP is accumulating all
platform resets and executing a single reset from FSP Notify Phase.
As coreboot skipped calling into the FSP Notify APIs hence, it might
have missed the scope to issue the platform reset.
BUG=b:282266168
TEST=Able to build and boot google/rex and able to detect FSP reset
pending request.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibf7c996f09affa099c9124773fe2d581f370d1a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Changes: https://review.coreboot.org/plugins/gitiles/seabios/+/refs/tags/rel-1.16.2
Change-Id: I19b31f89c8fc504284f327c975c159616eb1b241
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
As announced in the 4.20 release notes, support for the Intel Quark SoC
is moved to the 4.20 branch and dropped from master.
Change-Id: I8a1ca7a2092aaeaea9c72eac5a8dd8f7d72e8f09
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
As announced in the 4.20 release notes, support for the Intel Galileo
mainboard is moved to the 4.20 branch and dropped from master.
Change-Id: I132adf2782721738c954252665fdcd7bb8e1a1cd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The `ramtop_table` is 10 bytes long, so adjust the check to
account for this.
Also, adjust the wording to make it clear what is required to fix it,
should the error be shown.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If2898c4bb22abb1779035aadc08f32898e9a096b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Generate the RAM ID for Samsung K3KL6L60GM-MGCT.
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 6 (0110)
BUG=b:281928906
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Ia5193d3ab3d654f25d519ad9a954f2ca8a15a978
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75152
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@google.com>
|
|
GC6 - Low power mode for system idle on Nvidia GPU
In GC6I Before ramp of PEXVDD:
Deassert FBVDDQ Enable, no delay is needed before or after.
In GC6O After ramp of PEXVDD:
Assert FBVDDQ Enable, no delay is needed before or after.
BUG=b:280467267
TEST=built for Hades and Agah, tested on Agah
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I0277772b1d2f6f4e6a3f74b92035e8b36f2670ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75302
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables stylus support by configuring the "GPP_D08" irqs for
rex SoC. This allows the SoC to detect a stylus device, when in use.
However stylus is not a wake up source for the rex.
BUG=b:282256460
Test=Stylus is detected on proto1 device.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I84a71aa664698e105b738f8680d0a4751ca1fc72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable PSYS capability. PSYS is required to safeguard the system
stability if no charger IC.
BUG=b:281479111
TEST=emerge-dedede coreboot chromeos-bootimage & ensure the value is
passed to FSP by enabling FSP log & Boot into the OS
Change-Id: Ibe54acaf80700252558b82f194b9536b6117b84e
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75196
Reviewed-by: Reka Norman <rekanorman@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add igd device name in soc_acpi_name(), and src/drivers/gfx/generic
can generate device in GFX0 scope in SSDT.
BUG=b:277629750
TEST=emerge-rex coreboot then check SSDT on DUT
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Id7a136b5234cf5c0f60ecf253ee78c123f1f573b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Being a static function, compiler is already putting its contents
in sdram_initialize(), its only caller.
Change-Id: Ie74d2283ef672a267d6a0c66d94aa0610f36c4f1
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74033
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With RAM init debug messages enabled, debug messages take up a lot of
flash space in romstage, with many repeated verbiage. By breaking
them up and factoring out the common verbiage, made possible with
printk(BIOS_DEBUG, "%s", ...), compiler can help deduplicate things
and make the romstage smaller.
When building for asus/p2b-ls with CONFIG_DEBUG_RAM_SETUP, this patch
shrunk romstage by 152 bytes.
Change-Id: I66e39e7901efbeb5ab72494ac02fc4d5e687c3a3
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The rationale behind this change is that multiple nested bridges using a
lot of bus numbers and IO resources is not likely to be a common hotplug
setup. When there is a large amount of hotplug ports using 32
subordinate busses results in boot failures (e.g. make qemu). 8K IO
busses for hotplug devices is also excessive in most use cases when only
64K is available in total (again make qemu results in failure to
allocate resources but does boot to payload).
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I8371958037d479e7d2053f49814735e15461ca6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74774
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch drops the assert check around
`FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN` config to ensure
`fsp_get_pch_reset_status()` can be used by all other FSP APIs to know
the status of the pending reset.
As per recent debug it has been found that, FSP is accumulating all
platform resets and executing a single reset from FSP Notify Phase.
As coreboot skipped calling into the FSP Notify APIs hence, it might
have missed the scope to issue the platform reset.
Going forward coreboot needs to implement the corresponding logic to be
able to identify any pending platform reset request and execute to
complete the silicon initialization flow.
BUG=b:282266168
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2c9e37fadc27eab820a3121e47e09529de34d10e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75309
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Phoenix has one more Type C port and two more USB2 ports which are used
as the legacy USB part of the two USB4 ports. The USB struct version
numbers have also changed, since it's a newer and incompatible version
of that struct.
TEST=After changing FSP to not hard-code the USB PHY config, but use the
configuration provided by coreboot, and applying this patch, the USB
connector on the USB2 port 4 lines works.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If52934595dd612154b97e7b90dbd96243146017a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73379
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Before the bootblock stage starts setting up the CAR mode, it sends
`POST_BOOTBLOCK_CAR` POST code. However, before the definition for
`POST_BOOTBLOCK_CAR` was introduced in the commit
0d34a50a360228138ade623e799b03eaba83b0a5 , the value `0x20` was used.
At that point, `0x20` means "entry into CAR mode" and `0x21` means
"the cache memory region is cleared". Right now we are sending the
same POST code twice, which makes no sense.
So we can do the following (todo: drop me after we decided which one is
more appropriate):
1) Drop it (current patchset does exactly that)
2) Introduce POST code similar to POST_SOC_CLEARING_CAR and use it
before the cache memory region is cleared.
Change-Id: I5d9014c788abdf5a4338c9e199138d1e514450b3
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Things with prompts should not use selects, but should instead default
to y. If there's a reason they need to be selected, they should be able
to be hidden when they're selected.
This isn't one of those cases where a select is needed, so set the
default to y instead.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If6de339c3a1ceb3cd71008402bba49b5efc4af3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The SPD format in the APCB has changed for Phoenix, and the injection
tool 'apcbtool' needs to be updated to match. Until this happens, the
APCB will be built containing the correct SPD.
BUG=b:281983434
TEST=Build
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If575f98511c796e93c5a12cd450a3a7985e39806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Add a minimal Dockerfile that pre-installs necessary software which is
needed to work with coreboot.
Change-Id: I85f3dc7b28b77989f0f1400d1282ed4b17082f65
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
i440BX datasheet says all memory errors reported during RAM init
should be ignored. Do as it says.
Change-Id: Iaf85fde813aa083ae62218a2df5aec303e3c9f8c
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73952
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This hook is specifically for asus/p3b-f so its mainboard code has
a chance to put SPD away after RAM init completes. What it intends
to do is done when GPO gets programmed in ramstage (and it's safe
to do so), and no other board needs this hook, so drop it.
Change-Id: Ib7874b4d2b69fdaa5f3c5a3421a62a629c4154a4
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Make ACPI code print a debug warning message when a timeout is
detected in a loop waiting for a condition.
This timeout message won't be displayed when this function is used as
delay loop (ie. without checking variable condition).
The following is required to get this log in kernel log buffer:
echo 1 > /sys/module/acpi/parameters/aml_debug_output
Here is an example of generated code when waiting for variable L23E to
be 0.
Local7 = 0x08
While ((Local7 > Zero))
{
If ((L23E == Zero))
{
Break
}
Sleep (0x10)
Local7--
If ((Local7 == Zero))
{
Debug = "WARN: Wait loop timeout for variable L23E"
}
}
BRANCH=firmware-brya-14505.B
TEST=Boot to OS and check that the Debug print is added to the
function.
Change-Id: I3843e51988527e99822017d1b5f653ff2eaa7958
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73348
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Pujjoteen5 support WWAN 5G device, add GPIO setting for WWAN 5G device
BUG=b:281943398
TEST=Build and check serial log
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Ie2e0ea34c54a453645d626f892f50654ef5064ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75195
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pujjoteen5 support WWAN 5G device, enable PCIe port 3 for WWAN 5G device
BUG=b:281943398
TEST=Build and boot on pujjo
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I6d2e8eaecae968ed51095d9497beab492ba7e0c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
BUG=b:280843816
TEST=builds
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I55a85335a34eee227abb6ff355719f7ca2cbf04a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Code changes are necessary because `-Wformat` warns about empty
format strings by default.
Change-Id: Ic8021b70f4cd4875b06f196f88b84940c9a79fe0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75147
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I1384a02fa2931002ddd629acef0a4368435cfeb5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use ECRAM field MTNS to determine if motion sensor present, and set
TBMC device status accordingly.
TEST=build/boot google/{jinlon,drobit}, verify ACPI status for TMBC
correct for both devices with and without tablet mode.
Change-Id: Ic06ab6d721f0a3435e6dfd7b5e130f378096afec
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
