summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
2009-10-20Correct typo. Thanks to Mark Marshall for spotting it.Myles Watson
2009-10-19Move ITE-specific option to src/superio/ite/Kconfig.Myles Watson
2009-10-19Add missing SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL kconfig variable.Uwe Hermann
2009-10-19Fix builds of amd/db800 and digitallogic/msm800sev with smaller bootblocks.Myles Watson
2009-10-19Unselect AP_CODE_IN_CAR in tyan/s289x. Trivial.Myles Watson
2009-10-19Clean up some #ifdef CONFIG_*Myles Watson
2009-10-18Add EXPERT kconfig option so we can hide more advanced optionsUwe Hermann
2009-10-18Drop a duplicated implementation of failover.c.Uwe Hermann
2009-10-18Simplify Kconfig files by using "select" where possible (trivial).Uwe Hermann
2009-10-18Drop dead/unused code (trivial).Uwe Hermann
2009-10-18Remove this, we no longer need it. Ronald G. Minnich
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
2009-10-17Remove CONFIG_ from #defines that aren't config variables. Trivial.Myles Watson
2009-10-17Silence src/Kconfig:349:warning: config symbol defined without typePeter Stuge
2009-10-17Remove some more instances of including previous empty x86/fpu/Makefile.incPeter Stuge
2009-10-17Drop src/cpu/x86/fpu/{Config.lb,Makefile.inc} since they are also emptyPeter Stuge
2009-10-16Make COM port selection and BAUD rate a "choice" for better usability.Uwe Hermann
2009-10-16Drop duplicate version of the documentation/cbfs.txt file as discussed.Uwe Hermann
2009-10-16This is a snapshot as the availability of the systems for this Ronald G. Minnich
2009-10-16Revert deletion that snuck in to 4794. Sorry.Myles Watson
2009-10-16Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8.Myles Watson
2009-10-16Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.Myles Watson
2009-10-16Drop empty cpu/x86/{mmx,sse}/{Config.lb,Makefile.inc} and remove referencesPeter Stuge
2009-10-16Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"Peter Stuge
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
2009-10-16Drop unused and useless CONFIG_MAX_PCI_BUSES.Uwe Hermann
2009-10-16Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.Myles Watson
2009-10-16Fix IRQ9 and allow ACPI without an MP table for Tyan s289x.Myles Watson
2009-10-16Fix kconfig setup for the VIA pc2500e.Uwe Hermann
2009-10-16Similar to r4626, change obj-y to driver-y for VIA C3 and C7.Uwe Hermann
2009-10-16Drop duplicate CPU subdirs-y entries for "../../x86/mtrr".Uwe Hermann
2009-10-16Add CONFIG_VGA_ROM_RUN to dbm690t and pistachio, otherwise theZheng Bao
2009-10-16this is probably in vain because this tool should use the same x86emu asStefan Reinauer
2009-10-15undo another accidential rename of X -> CONFIG_X (trivial)Stefan Reinauer
2009-10-15Start documenting a few kconfig variables and user-visible options.Uwe Hermann
2009-10-15Fix Kconfig for technexion/tim5690.Libra Li
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-15Add Kconfig support for kontron/kt960.Myles Watson
2009-10-14cbfs_and_run_core() did not check the return code of cbfs_load_stage()Carl-Daniel Hailfinger
2009-10-14Fix high tables address calculation on cn700 with VIDEO_MB > 0.Myles Watson
2009-10-14Add forgotten target files for technexion/tim5690.Libra Li
2009-10-14White space and typo fixes. This makes it easier to compare the s2895 & s2892.Myles Watson
2009-10-14delete white trailing spaces. It is done by the perl command.Zheng Bao
2009-10-14Use CAR ck804 code with the s2892.Myles Watson
2009-10-13White space change in preparation for a patch to unify handling of ck804.Myles Watson
2009-10-13Revert some garbage that snuck into my trivial change, correct a spelling error.Myles Watson
2009-10-13Remove a couple more warnings. Trivial.Myles Watson
2009-10-13Add support for the MSI MS-6156 board.Uwe Hermann
2009-10-13Fix kontron/kt690 build.Myles Watson
2009-10-13This patch support for the Technexion Tim-5690 mainboard.Libra Li
2009-10-13This patch adds (initial) support for the Kontron KT690 mainboard. Stefan Reinauer
2009-10-13Fix obvious typos (trivial).Uwe Hermann
2009-10-12Make fam10 build (but not boot due to bootblock size problems.)Myles Watson
2009-10-12Add the compareboard utility which is useful for portingPatrick Georgi
2009-10-11Remove useless udelay() duplication.Uwe Hermann
2009-10-11HAVE_ACPI_TABLES cleanups for kconfig:Uwe Hermann
2009-10-11Make console maximum/default log level a choice option.Uwe Hermann
2009-10-10Drop "select CONSOLE_SERIAL8250" from QEMU, it's default-y anyway.Uwe Hermann
2009-10-09Add const to get rid of some warnings when passing quoted strings.Myles Watson
2009-10-09This change allows us to see the spd on the s850, finally. Ronald G. Minnich
2009-10-09Remove extra CONFIG variables.Myles Watson
2009-10-09Remove default n statements to simplify .config and ldoptions files.Myles Watson
2009-10-09Move the ulzma prototype out of the function to make the code easier to read.Myles Watson
2009-10-09Remaining boards are Kconfig'd now. Whether they workPatrick Georgi
2009-10-09More Kconfig-supported boards, and also kconfig supportPatrick Georgi
2009-10-09More kconfig cleanups:Uwe Hermann
2009-10-08Fix CS5535 build for kconfig, more kconfig boards (lippert, artec)Patrick Georgi
2009-10-08Simplify targets/amd/serengeti_cheetah/Config.lb. There were too manyMyles Watson
2009-10-08This dialogue on email was useful and hence included. Ronald G. Minnich
2009-10-08Set MMX and SSE where needed. Note that many boards don't even botherRonald G. Minnich
2009-10-08Disable x86emu for via based boards which bringPatrick Georgi
2009-10-08More kconfig:Patrick Georgi
2009-10-08Oops, wrong type for Kconfig value. Trivial fixPatrick Georgi
2009-10-08Kconfig: AMD Fam10, all Tyan boards.Patrick Georgi
2009-10-07Emergency fix. Failover.inc can end up with code that uses sse. It has Ronald G. Minnich
2009-10-07Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boardsUwe Hermann
2009-10-07Kconfig allows you to run all PCI ROMs, VGA only, or non-VGA only.Myles Watson
2009-10-07Fix trivial typo in Kconfig spotted by Peter, introduced by me.Patrick Georgi
2009-10-07Get rid of early_serial, it is now a generic function in early_init. Ronald G. Minnich
2009-10-07Convert all "default y" options to "select FOO" (shorter).Uwe Hermann
2009-10-07Various Kconfig fixes and improvements:Uwe Hermann
2009-10-07Fix intel board build on kconfig. MAX_CPUS was missingPatrick Georgi
2009-10-07Kconfig:Patrick Georgi
2009-10-07Enable full ROM access on AMD CS5530(A) (needed for CBFS).Uwe Hermann
2009-10-07More boards in kconfig, and moved -O2 flag for romcc intoPatrick Georgi
2009-10-06UseUwe Hermann
2009-10-06Various fixes to Kconfig: All kconfig-boards should have aPatrick Georgi
2009-10-06Remove duplicate device trees for Tyan s289x. Remove pre-CBFS statements.Myles Watson
2009-10-05Backport facility to specify a local coreboot version suffix from v3.Uwe Hermann
2009-10-05Remove svn:externals that pull in all kinds of useful tools thatPatrick Georgi
2009-10-05Without these fixes the w83627dhg driver (which is currently not used by anyStefan Reinauer
2009-10-05fix building on Linux again, working around crude runtime OS detection.Stefan Reinauer
2009-10-05PCI_ROM_RUN and CONSOLE_VGA are global options in Kconfig andUwe Hermann
2009-10-04The new CBFS based build system requires the whole ROM to be accessibleUwe Hermann
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
2009-10-04Add initial kconfig support for all AMD GX1 boards.Uwe Hermann
2009-10-04This removes the uses of the buildrom utility and the coreboot.stripPatrick Georgi
2009-10-04Remove a bit of pre-cbfs build system infrastructure.Patrick Georgi
2009-10-03Remove another FAILOVER variable. (trivial)Patrick Georgi
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 12:55:45 +0000