Age | Commit message (Collapse) | Author |
|
This patch guarantees that non-ChromeOS platforms continue to enable
early caching.
ChromeOS devices, on the other hand, control this configuration through
the motherboard configuration based on the underlying SoC.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex.
Change-Id: I412b2b6a807dc0f5f2632f0fbd56bd37689dead3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch enables the `SOC_INTEL_COMMON_BASECODE_RAMTOP` config
option for select mainboards, as not all board variants may want to
enable this config due to underlying SoC dependencies.
Mainboards that attempt to enable early caching have exhibited soft
hangs while switching between pre-RAM and post-RAM phases. This patch
allows mainboards to choose to enable this option without enabling
it by default (which could cause boot hangs).
Furthermore, it reorganizes the configuration options under
BOARD_GOOGLE_BASEBOARD_REX in alphabetical order for better readability.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex and
intel/mtlrvp.
Change-Id: If380c2ecbee4f6437c3d58bfb55be076a4902997
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Follow thermal validation, add ldo output select for speaker.
BUG=b:297298847
TEST=emerge-nissa and deploy to DUT to verify audio functionality.
Change-Id: Ie68f2b35f024b4dd066d831ae8fd5a662d407753
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This partially reverts commit f493857c9bc1 ("mb/google/brya/var/*: Set
dGPU/LAN/WLAN device type to generic"). Setting the LAN device type to
generic broke programming the LAN MAC address, so set it back to pci.
TEST=build/boot google/brya (osiris), verify LAN MAC address programmed
correctly.
Change-Id: I4fb43b7212e67b5c38724baad572860bc45b558e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79150
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This mostly reverts commit 6c705e766f7f ("mb/google/puff/var/*: Set
LAN/WLAN device type to generic"). Setting the LAN device type to
generic broke programming the LAN MAC address, so set it back to pci.
TEST=build/boot google/puff (wyvern), verify LAN MAC address programmed
correctly.
Change-Id: I558ae6dc1366d5a8a22e0383d7d597d15159df03
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I4dbe9b7a05171bb244ec1ebe6ce7d390a6373d61
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Arrange ACPI table enum in a vertical and alphabetized format.
This change aims to reduce conflicts between patches.
Change-Id: I192339df771d6a3ae67358fe46334fe2b216b974
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79099
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of using MSR IA32_PLATFORM_ID read the SystemAgent device id
to figure out the PC type. This follows the BWG which suggest to not
use MSR IA32_PLATFORM_ID for system identification.
Tested: Lenovo X220 still boots.
Change-Id: Ibddf6c75d15ca7a99758c377ed956d483abe7ec1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78826
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Now that those registers are only written once set the lock bit to
protect it from runtime changes.
TEST: Lenovo X220 still boots.
Change-Id: I4c56a3cb322a0e75eb3dd366808068093928e10c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Write MSRs that are in scope package only once by checking for the BSP
bit. While this improves performance a bit it also has the benefit
that registers can be safely locked down without the need for
semaphores.
TEST: Lenovo X220 still boots.
Change-Id: I43f5d62d782466d2796c1df6015d43c0fbf9d031
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
commit 1e9601c5ef80 ("nb/intel/sandybridge: Standardize MRC vs. native
SPD mapping API") introduced an uninitialized variable issue.
Change-Id: I41b081dc4c961acc04423067e29e0eabe5f17539
Found-by: Coverity CID 1524317
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79093
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Updating from commit id c59794a6:
2023-11-02 Nicholas Bishop sign_uefi: Support signing via pkcs11
to commit id f2b01bf0:
2023-10-27 Julius Werner firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
This brings in 66 new commits:
c59794a6 sign_uefi: Support signing via pkcs11
68d4aa4b sign_uefi: Skip private key check if it's a pkcs11 URI
6b9d624b sign_uefi: Pass each key path separately
483f65e4 sign_official_build.sh: properly show errors on loem issues
516ee7bc sign_uefi: Use named args instead of positional
0eec8e25 vboot_reference-sys: Switch from Command to bindgen::Builder
46f5aab8 image_signing: support multiple release names
f13af139 sign_official_build: Sudo invocation within bits of android signing
3f165374 futility: updater: Add optional serial number argument to --ccd
64379cc6 sign_official_build: add --debug flag
7160bf9f 2lib: Fix relocation issue when compiling locally with musl libc
0e27cdff vboot_reference-sys: Add vboot_host.h
2c82e73c Override use_apksigner FLAGS
b43469c7 futility/cmd_show: Support --publickey FW_VBLOCK
0eb4da96 tests/futility: Update kern_preamble.bin as kernel_part.bin
68a03355 tests/futility: Move test_show_vs_verify.sh into test_show_and_verify.sh
8daf1474 tests/futility: Move 'futility show' tests to a separate file
34190e3d futility: Exit with error when metadata hash verification not supported
967aa462 firmware/2lib: Fix function comment for vb2api_get_firmware_size()
f2b01bf0 firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
ef6d02df futility/vb2_helper: Add missing newline for error messages
886d13d7 PRESUBMIT: switch to cros format
ac2e1a75 host/lib: Decouple openssl headers from HOSTLIB
86ec05f7 futility: updater: Add help info for --quirks
2850244e futility: updater: Abort if the unlock_csme_* is used on a locked device
f1b5c88d devkeys: delete old unused firmware_bmpfv.bin
4444c5fe crossystem: Fix tpm_fwver for fwid < 12935
98ef339f 2lib: Prevent overwriting the value of fw_vboot2
c7517eb4 make_dev_ssd: support ChromeOS Kdump
8e3462cc tlcl: Increase the TPM_BUFFER_SIZE
740a2966 vboot_reference: Drop 'host' usage for 'internal' in flashrom.h
57877a44 vboot: Remove comments about physical dev switch
3401d16c 2lib: Fix typos, comments and formats
fdf52d45 scripts/: Drop deprecated {g,s}et_gbb_flags.sh scripts
bf76e9ee 2lib: Output the correct kernel_version
1ac4663e make_dev_firmware.sh: update pattern for matching wp status
c57ab9f7 2lib: Add recovery reason VB2_RECOVERY_WIDEVINE_PREPARE
e094ba31 tlcl: Reduce the variants of TPM2B
b047600d sign_official_build: support key config for pkcs11
f8712b73 vboot: support signing with pkcs11 private key
17fe786f strip_boot_from_image.sh: sfill fast
6c856cd3 futility/updater: Fix EC software write protection logic
1dc5a421 futility: update: Deprecate --unlock_me by --quirk unlock_csme_nissa
f0d88587 futility: update: Refactor the 'unlock ME' quirk(s)
81429ee9 futility: update: Do not update RO when the AP RO is locked
a3beb737 futility: update: Revise the ordering or quirks
2c1844fa futility: update: Remove unused quirk 'unlock_wilco_me_for_update'
75530d32 tests/futility: Test with new signer_config.csv based firmware updater
cba649fa 2lib: Expose 2hmac
ab015448 2lib: Refactor hmac to vb2_hmac_calculate
3545f8b4 Revert "sign_uefi: Remove exception catching"
55f625a9 dump_fmap: Add offset and size to flash_ec format output
a27ee336 keygeneration: add shellcheck source statements to help linting
055f9aa2 keygeneration: replace_recovery_key.sh: make minios key optional
6cb8ab60 scripts: delete unused values kernel command line
1f76c38b vboot: Drop phone recovery support
ccf6b037 scripts: Legacy fix for set_gbb_flags.sh
8f03069e futility: Add basic README.md
88963df8 utility: Query platform wp status with futility
6c3817d2 utility: Drop cros_alias technical debt in dev_debug_vboot
df85f512 scripts: Drop cros_alias technical debt in make_dev_firmware.sh
7395cd68 futility/updater_utils.c: Match on EC path to prepare for split
52518415 crossystem: Recover corrupted RW_NVRAM on flash writes
81f9ddaf futility/cmd_gbb_utility.md: Add basic GBB subcmd doc
c4995268 futility/: Fix define confusion
69dab5a6 crossystem: Avoid writing duplicate entries to RW_NVRAM
6c37b520 Revert "crossystem: stop supporting legacy chromeos_acpi driver"
Change-Id: Ic7ecdabcdd26df349b8abf1c5a77c806facfe1d8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78865
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Check FW_CONFIG and disable gpios for HPS if HPS_ABSENT for skolas
and brya0 variants.
BUG=b:311740746
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas
to kernel and verify via "cbmem -c | grep HPS".
Change-Id: I8cbe4f40c41f1d06e8f511c3e88c05984566d441
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Check FW_CONFIG and disable gpios for LTE if LTE_ABSENT for skolas
and brya0 variants.
BUG=b:311459627
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas
to kernel and verify LTE gpios are disabled via "cbmem -c | grep LTE".
Change-Id: I3f3bc2b536babf71cc484cce02f96f47707f729c
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79122
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skolas uses brya0 schematic, so override tree should be almost the same
for brya0 and skolas. This change sync's the skolas overridetree.cb
with brya0's overridetree.cb.
BUG=b:311722825
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas to
kernel.
Change-Id: I14a2ed803a8ffb8614018af587c66034fb724b38
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This changes the path where go installs its packages.
Now the packages are not installed in the users home directory anymore.
This solution is not perfect though, since offline build are still not
possible, because go will fetch the packages at build time.
-modcacherw will create the go files with rw permissions, otherwise
coreboot is not able to delete the files afterwards (make distclean).
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2a35369628454057ea4758cd1225e57f07cb71c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
According to eDP panel datasheet[1], the eDP panel needs 0 <= x <=200ms
delay after VDD powering on. The MIPI panel[2] does not need this delay.
Move this delay to eDP path.
[1] NE135FBM-N41 V8.0 Product Spec_P2 20191025.pdf
[2] B5 TV110C9M-LL0 Product Specification Rev.P0
BRANCH=none
BUG=none
TEST=check FW screen
TEST=check timestamp
Before:
60:device initialization 696,422 (1)
15:starting LZMA decompress (ignore for x86) 696,587 (165)
16:finished LZMA decompress (ignore for x86) 696,675 (88)
17:starting LZ4 decompress (ignore for x86) 1,340,226 (643,551)
After:
60:device initialization 724,259 (1)
15:starting LZMA decompress (ignore for x86) 724,425 (166)
16:finished LZMA decompress (ignore for x86) 724,512 (87)
17:starting LZ4 decompress (ignore for x86) 1,168,176 (443,664)
Change-Id: I92bca5ec8269f4bad4dfab4ee193cdb5665de233
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79109
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
ChromeOS has switched to using the main branch, update accordingly.
BUG=b:294218930
TEST=None
Change-Id: I31f67ef4fb175a4e4896b5bed81d5ae1cdddb827
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79143
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
In preparation for the upcoming release, add the template for the
24.02 release and update index.md.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I694142c31ba684e7b94640d55302b2440e25619a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79073
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the HD audio controller in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the host bridge device operations
to the PCI device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and audio still works
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I9bbbe9f4490dc6fb21174d63d1c8906d69ea3ee0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79118
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the PCIe root ports in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the host bridge device operations
to the PCI device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and all PCIe devices on PCH are
visible and working.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I05bfe8db88fd54415f320f32ea147636ca4e0df8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since the integrated GPU is always function 0 of device 2 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the host bridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and graphics works in UEFI
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I20e387e626e19dc441aceda18451186d1e86cd5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79114
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the host bridge is always function 0 of device 0 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the host bridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: Icf3d9f8cd2be2f8ef71fd9fdb5f005f3b683332e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79113
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
While having select statements in Kconfig.name files is valid in the
syntax of the Kconfig language, having the selections split between the
normal Kconfig file and Kconfig.name files makes it harder to see what's
going on.
Kconfig.name files will now be limited to their original purpose of
selecting a particular board or board variant, not actually configuring
that board.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2aab78e296f2958e77a938b1afa40a25a6aa82b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Brox is using Ti50, so make sure that we set the right config for that.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: If4a16448eebc028b2989c1de150b9e0f9067ee92
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Assigning the macros in gpio.h to the correct GPIOs. Also, fixing GPE
configurations so that they are mapped to the proper wake sources
(GPP_B, D, E groups).
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I6320cd98e560e514e63c52e173cb7923cfd1cdee
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
We need to increase romstage size a little to make a compiler upgrade
fit (CB:70771). Unfortunately the end of the romstage directly touches
the QCSDI region in the current memlayout, and there is no other way
to reshuffle things to make more space... so we need to move QCSDI out
of the way. This means that anyone who is actually building this
platform with CONFIG_QC_SDI_ENABLE (which requires a proprietary blob
that's not publicly available) will need to recompile their QCSDI binary
to match the new start address.
Change-Id: Iaf13e4001b3c763e3ec59009779931ec75603d5d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79074
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
These should be the final release notes prior to tagging coreboot
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id723f8e1fc92ef1a36e877f48e594eef59b0ba8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79077
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
These perl modules are needed to run the coverage-report target for
gcov.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If32a42ce17edcbae94394f770c26d3300abebcbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79072
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the vboot board list for the 4.22 release.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I77c5ca2c2c36d8b1ddadad4f15d2d4148ff0b325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I25b7adccf60abe515d129f8d00383165eccf6431
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79028
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I30a15277527a1e423691ff55ff11cc2136cefc90
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Building coreboot for the Qualcomm SoCs SC7180 and SC7280 requires to
include the Qualcomm blobs, which requires to accept their license.
However, for various reasons it makes sense to build without blobs, e.g.
static analysis or just build-testing.
So in order to do that, run the steps integrating the Qualcomm blobs
into the coreboot binary only if USE_QC_BLOBS is enabled and also remove
guards which prevent building related mainboards when USE_QC_BLOBS is
not enabled.
Change-Id: I249ac477b8f10e7fa0848e967c23a3b3b9bbd27d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79026
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the CPU and PCI domain operation bindings statically in the chipset
devicetree instead of adding them during runtime.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44fa57458c408e74a6341643620c5e9ac1817557
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since this chip is a SoC and also to bring the chipset devicetree more
in line with the chipset devicetree of Sandy Bridge, merge the chip
operations of the northbridge's root complex and the northbridge itself
into one chip operations structure and use it at the top level of the
devicetree.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8b42bac07b1409bbc797bc4428cf9f84a40e94c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
BKDG #52740 Rev 3.05 was used as a reference for the SoC's various PCI
devices. The HDA controller in the FCH at function 2 of device 0x14 on
bus 0 was missing in the mainboard's devicetrees.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6970c2f6e6d661d40406586f4e6eeb05bcd07979
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79083
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
There's no need to remove the corresponding fields from the
device_operations struct when HAVE_ACPI_TABLES isn't selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iac20b6cdc44a5280566ee7003a5ef6fbe913b099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78990
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's no need to remove the corresponding fields from the
device_operations struct when GENERATE_SMBIOS_TABLES isn't selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa24d1fd211c263b788046e63de3dd5c54cba801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Configure I2S1 and I2C5 for ALC5650 to support beep sound in
depthcharge.
BRANCH=corsola
BUG=b:305828247
TEST=Verify devbeep in depthcharge console
Change-Id: Ibd098adb8d5568ad338bbfece0edfd0c38cbf854
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79064
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I92d5497644338927b81fbabea2bce45f1e59f0b4
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Morphius boards using pre-v3.6 schematics don't have a dedicated GPIO
for touchscreen power/enable, and so fail with runtime detection
enabled. Since it only has one touchscreen option, and no SKUs lack a
touchscreen, we can safely assume it is present in all cases.
TEST=build/boot morphius w/4k screen, verify touchscreen enabled in
cbmem and functional in Linux and Windows.
Change-Id: I13e07e14b5a18fa1dd3b18950cf46e9d7821eedc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Leaving the user as coreboot caused the entrypoint to run as coreboot,
which means we couldn't mount directories or run sshd correctly.
Switching to root at the end of the file fixes this.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie10e1d7ad4def0faafe3bcd580a77e23c3bfe948
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79067
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards (e.g. prodrive/hermes) that do not provide their own FMAP
and therefore have been generated by the build system (+ ifdtool)
experience a failure when trying to build with an IFD that contains
regions which do not have equivalent fmap names (set to NULL).
Therefore add a NULL check for the fmapname and ignore the region if we
do not have an fmapname.
Test: compile prodrive/hermes
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ib4589b7fdbd11d644214ca5601536e9aeb26882f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
ab9b64ac4c Add a host command to print info about AP-firmware state
The original include/ec_cmd_api.h version in the EC repo is:
ab9b64ac4c Add a host command to print info about AP-firmware state
BUG=b:300525571
BRANCH=none
TEST=none
Change-Id: I3570e073a91621cb1d28a24aa35c1f4beedceaab
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79066
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Returning a NULL device name can cause issues if something else does
handle it.
E.g. UART and GNA devices on Intel Alder Lake-N cause
INTERNAL_POWER_ERROR BSOD's in Windows when enabled due to invalid
packages being created from a NULL name
Test: build/boot google/nissa (craaskvin) to Win11
Change-Id: I0679147ad3e330d706bbf97c30bc11b2432e2e8a
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Appears to not be used under Windows, Linux, or ChromeOS, and causes
high CPU usage at idle under Windows.
BUG=none
TEST=build/boot Win11, Linux on google/frostflow, verify camera shutter
function unchanged, CPU usage under Windows idles where expected.
Change-Id: I8a6ea3b886766bdb055b40949c75bec0264eecc5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit 7713a2f295d9ed9a7023a78e085ce190ee1203fe.
Reason for revert: breaks main branch
Change-Id: I2749bea9369c222e510b838e278c7797d5dce56e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78852
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Updating from commit id edd465837e26 (2023-10-20):
cezanne: Update PSP binaries to release 0.11.11.75
to commit id e4519efca746 (2023-11-15):
Revert "picasso: Update PSP binaries to release 0.8.13.7B"
This brings in 1 new commit:
e4519efca7 Revert "picasso: Update PSP binaries to release 0.8.13.7B"
Change-Id: I860aa04324128199cbc91a5f310fcdf92a2cd65d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
System76 only sells units with memory speeds up to 5200 MT/s, but the
i9-13900HX supports up to 5600 MT/s memory.
Tested by running memtest and checking dmidecode reports 5600 MT/s when
using 2x16 GB 5600 MT/s Crucial SODIMMs (CT2K16G56C46S5) on addw3,
bonw15, serw13.
Change-Id: I9bb0435769c70c1db06d2c5cca2dd28eb5331f49
Signed-off-by: Matt Parnell <mparnell@gmail.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Tested-by: Levi Portenier <levi@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78912
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I5176aa56ecaa52d0f42455bc7176b0415a6199ec
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78594
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Respect VBOOT_SOURCE while including generic headers.
BUG=none
TEST=make clean-unit-tests &&
VBOOT_SOURCE=/path/to/vboot_reference/ make unit-tests -j
TEST=make clean-unit-tests && make unit-tests -j
BRANCH=none
Change-Id: Id3bb3726c91167d2dd648d748763a3948787f28d
Signed-off-by: roccochen@chromium.com <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78849
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to proto schematics, the SD card is removed.
BUG=b:308968270
TEST=emerge-geralt coreboot
BRANCH=None
Change-Id: Id4e021e7896d093560f39c40573ac616d76438c2
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
These backlight related functions can be reused in other variants, move
them out to the panel.c. Also the panel_geralt.c should be used for
Geralt, enable it on Geralt board only.
BUG=b:308968270
TEST=emerge-geralt coreboot
BRANCH=None
Change-Id: I5d4035d5f480551c428c450826e23bf77f2fe08a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78955
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
|
|
This uses the size attribute to traverse the possible string.
This patch traverses the entire property for non printable characters
and not just until the first 0 is hit.
Now numbers that start with a zero (memory wise) are not falsely
recognized as strings:
before the patch:
clock-frequency = "";
after the patch:
clock-frequency = < 0x1c2000 >;
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I229c07b76468fe54f90fa9df12f103d7c7c2859d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=none
TEST=build karis firmware pass
Change-Id: I67b4ca4c8fde795d4206eaa0b9ea9d9bfc768ac6
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Create the variant Ciri and enable MAX98390 AMP for it. The panel
related support will be added in the follow up CLs.
BUG=b:308968270
TEST=emerge-geralt coreboot
BRANCH=None
Change-Id: I7bbe9ed5e722a70bab1c799a61ce38d2ad58ab25
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78954
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch creates a new variant mtlrvp4es_p_ext_ec. The new
variant will support ESx samples. The existing mtlrvp_p_ext_ec
variant will support the QS samples.
BUG=b:310775573
TEST= Build and boot mtlrvp4es_p_ext_ec.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Iad72c0f6343af149d16d8b1f8639ba496f6aab0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch sets the default locales to English for platforms that
do not have support for VBOOT configuration. This ensures that the
system will use English locales if the platform does not provide
its own locale settings.
TEST=Built and booted the google/rex platform successfully.
Change-Id: I7554c8bfd58411f460deeb22cf7218059ca8ba9f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79054
Reviewed-by: Hsuan-ting Chen <roccochen@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The ux_locales-test relies on the ability to determine supported
locales for the platform. However, this information is unavailable
without VBOOT config being enabled. Therefore, enforce this test for
platforms with VBOOT config alone to avoid unnecessary failures.
Change-Id: I2828eb062e2b601e073e7dab9aef7316fc6ba2cd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hsuan-ting Chen <roccochen@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Update power limit values based on the suggestion of the thermal
team for RPL CPU.
The PL1 value (28W) suggested by the thermal team which is different from the reference document 686872 (PL1=15W).
BUG=b:310834985
TEST=built and booted into OS.
Change-Id: Ia2540ecd1fc453701b9160c97d82ba50b88ee848
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79059
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is already handled as a separate case in the code below, so there's
no need for this assert any more.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7511ec5683a924dc289faa2b9fabd0e8714d291e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use a define instead of magic numbers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2c6d17bd78a0e207f9130102b43ba78aa55ce377
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Previously acpigen_pop_len always wrote a 3 byte PkgLength to the 3
bytes reserved by acpigen_write_len_f. After this patch acpigen_pop_len
encodes PkgLength in 1-3 bytes depending on the PkgLength. When less
than the 3 bytes that were previously reserved in the corresponding
acpigen_write_len_f call are needed for PkgLength, the payload data will
be moved back by the number of reserved bytes that aren't needed for the
PkgLength.
This fixes the problem that the Windows AML parser doesn't like a 3 byte
PkgLength being used for the size of the buffer containing UTF-16
strings when the length could be encoded in a single PkgLength byte. In
that case, Windows previously ignored the whole SSDT containing this
larger than necessary PkgLength encoding. It should however be noted
that the ACPI 6.4 spec doesn't specify if it's required to always use
the most compact possible encoding of the PkgLength or not. Since iasl
generates the shortest possible PkgLength encoding, it's also a good
idea to make coreboot's acpigen do the same although it's not required
by the specification.
With this patch applied, Windows still boots on Mandolin and the time it
takes to write the tables doesn't change. To measure the times, the log
level in bs_sample_time was increased to BIOS_CRIT and the console log
level was increased to BIOS_CRIT too to only get those times as output.
BS: BS_WRITE_TABLES run times (exec / console): 8 / 0 ms
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib897b08a05a7cdc52902d51364246c260ea1f206
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
This patch adds asl code for MMIO device like I2C, UART, GPIO etc.
Change-Id: Ic5bc2cc0141e9da7e2c6ed7691188d7c94b6b1e3
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>t show
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78895
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for the new memory CXMT CXDB4CBAM-ML-A.
BUG=b:304932936
BRANCH=firmware-dedede-13606.B
TEST=Run command "go run \
./util/spd_tools/src/part_id_gen/part_id_gen.go \
JSL lp4x src/mainboard/google/dedede/variants/pirika/memory/ \
src/mainboard/google/dedede/variants/pirika/memory/\
mem_parts_used.txt"
And confirm the mainboard boot normally with CXMT
CXDB4CBAM-ML-A memory.
Change-Id: Iff2ed16bcbc9b0755e60a284246aa928625fa26a
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78892
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Some functions in the headers for sc7180 and sc7280 specified the
int as their return type when they should have used enum cb_err.
Found while testing GCC 13.2.0
Change-Id: I41331fe708a396f7f2f40359e8ba03c8a46a4d4b
Signed-off-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With the update to GCC 13 a new warning about subtracting numbers from
arrays appears.
src/arch/arm64/armv8/mmu.c:296:9: error: array subscript -1 is outside array bounds of 'u8[]' {aka 'unsigned char[]'} [-Werror=array-bounds=]
Change-Id: I4757ca2e7ad3f969d7416041ea40c3e9866cdf49
Signed-off-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79014
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The THRM and SATA PCI devices do not currently have any ACPI devices
defined, so drop them from soc_acpi_name() so they do not end up in
the LPI constraint list. This eliminates the following errors
under Linux:
AE_NOT_FOUND: _SB_.PCI0.THRM
AE_NOT_FOUND: _SB_.PCI0.SATA
TEST= build/boot google/hatch (jinlon) and verify no ACPI errors.
Change-Id: I3827b152644e2eaecc1ad288d441d2dad4d76ccb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79013
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After commit adaeb1102186 (nb/intel/sandybridge: Clean up post Haswell SPD mapping API migration), no boards use this header anymore and it
no longer offers original content.
Adjust northbridge code #includes as needed and drop it.
Change-Id: I2785e920bd6188dbfc1a6157351083ec4a2526d0
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
After commit 940fe080bf1e (mb/apple/macbookair4_2: Correctly implement
SPD mapping the Haswell way), this file is obsolete
and can be removed.
Change-Id: I5afe6809c7097ab8529a3c1ec7befbd0d6f01c5f
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
With commit adaeb1102186 (nb/intel/sandybridge: Clean up post Haswell SPD mapping API migration), raminit_native.h now only includes 4
other headers and offers no original content. Based on the idea that
all source files should include what they use directly, drop it in
favor of sandybridge.h (which it already includes anyway) and types.h
(replacing stdint.h because it also uses boolean constructs).
Board appears to not use anything sb/intel/bd82x6x/pch.h provides.
And the board still builds after dropping it.
Change-Id: I1b201fe4dd29bac5feb08f372d1e36353eac161d
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78783
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All of these signals have net names, but are actually unstuffed, so we
have to set them to NC.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I27d8b7cd02aefb49a2dc031a30eb0d1e8aa9faa9
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Report smbios_cpu_get_voltage() on Sandy Bridge as well.
Change-Id: I13ea930a58eaedc24d69fa3790f1f2a151558a80
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78432
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skip sending EOP from coreboot when payload is sending it.
BUG=b:279184514
TEST=Verify sending EOP from depthcharge on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0fbb9fd0f8522eefad39960ca3167c2ba764f523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74765
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I866250602701e7e83a695d346f4b404b1bbae6d5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I4f2c4f4a576ea2fd2ccb7a7e6b52cf258bac5f84
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79043
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ie25c56f48648733095ab9d2a565c842b2f90efb2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79041
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ic25d112a95903e77b58bda70bbcc3f08df383395
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: If4f89fb81664474e03ab0ade76cfbd617127127e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79040
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I413a3630bda841ae9ed6c4a584d2250a81c28308
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ic4043828baf43d14f7f2060fa3946e3a9e2008fc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79038
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The comments related to the PCI devices are superfluous since the
reference names from the chipset devicetree are used. So remove the
comments and also the devices which are turned off, or in general have
an equal state compared to the configuration in chipset devicetree.
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ic45446b03a3c571837fc1c41f55d60bdf2a25a7e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ib1adeaf4745804dfc91f99fb4e4491b68631202c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
- Disable unconnected PCH PCIe ports 1 + 3.
- Add smbios_slot_desc to WLAN PCIe port
- Add comment for PCIe port 7 that might have a
XHCI controller connected (some variants only).
Test: Lenovo X220 still boots and all devices are still working
fine. The WLAN slot is shown in dmidecode -t 9.
Change-Id: I3fdfbb7ad30e2ff8a289d9055eaef0557475fdff
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I6ba850c783999d06c73137ed77d32fc108a20347
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I41b3ed4926fe77c5729672fd7a7bcb8ca0c5c216
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79033
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: Ib6edae61fb904143c3b3994df812524a258fa9f3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I9f92246da4a500e85c878d865d621033f6b35f1b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
With migration to Haswell SPD mapping interface complete:
1. Remove weak stubs meant to ensure smooth transition and
internalizes mainboard_get_spd() within raminit.c.
2. Remove post-mainboard SPD data sanitization code in raminit_mrc.c,
now that it fills its own SPD data.
3. Remove old prototypes from raminit_native.h
4a. Drops raminit_native.h from raminit.c, as individual headers
therein are already included.
4b. Drop another header from raminit.c IWYU identified as unneeded.
asus/p8z77-m still builds afterwards.
(sandybridge to receive a full IWYU cleanup later.)
Change-Id: Ie073c1386cd0a645069f0e1416263b4fa359b74b
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76991
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Boards without HAVE_SPD_IN_CBFS: Move SPD mapping into devicetree.
Boards with HAVE_SPD_IN_CBFS: Convert to Haswell-style SPD mapping.
Change-Id: Id6ac0a36b2fc0b9686f6e875dd020ae8dba72a72
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
While converting this board to provide SPD info using the Haswell API,
it was discovered that its SPD setup was not correct to begin with.
For a board that only has soldered down memory with SPD data in CBFS,
it didn't enable HAVE_SPD_IN_CBFS in Kconfig. It also duplicated one
set of SPD data with deliberate gaps in between. It worked its dark
magic within mainboard_get_spd(), which is going away as a callback.
Add HAVE_SPD_IN_CBFS to mainboard Kconfig, recreate the one set of SPD
data as a hex dump same as other boards, and hook everything back up
with Haswell-style mb_get_spd_map().
Recreated SPD data was extracted from abuild-built binary and manually
verified for correctness against existing spd.bin (which will be
removed in a follow-up).
Change-Id: I906c49f6d1949f830828530edc0298b1b22ec04d
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76995
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changes both MRC and native raminit code path to get SPD mapping
from one place.
Boards with all memory socketed specify their mappings in a
devicetree setting introduced in commit 5709e03613b3
("nb/intel/sandybridge: Migrate MRC settings to devicetree") back in
May 2019 but remains unused as of this patch. This setting
will now hold raw SMBus addresses, and MRC raminit gets code to
translate them into a representation MRC expects.
Boards with soldered down memory (specifically with HAVE_SPD_IN_CBFS
in their board Kconfig), with or without socketed memory, specify
their layouts in mb_get_spd_map() as used by Haswell boards, where
they access hardware GPIO straps to select which SPD data to use.
This harmonizes the way boards specify their SPD layouts across
Haswell/SNB/IVB boards whether using MRC or native raminit. Going
forward they only need to specify the layout in one place. (Going
forward the devicetree setting should be backported to Haswell,
once we get native raminit working there.)
With this, northbridge code is now fully responsible for loading
all SPD data, be it from CBFS or SMBus.
To avoid breakage, transition will happen in stages:
1. This patch gets all the code in, and implements weak stubs that
maintain existing code and data flow (i.e. mainboards still populate
final SPD layout data). At this point devicetree already uses new
representation, but is still unused meaning no breakage.
2. Follow-up patch(es) remove mainboard_get_spd() from mainboards, and
replace it with mb_get_spd_map() or devicetree values (as appropriate)
with converted SPD info. The "weak" mainboard_get_spd() with new logic
takes over. Boards go Haswell Style at this point. Boards with MRC
raminit also lose code to fill in SPD data, allowing new data to take
hold.
3. Clean-up patch removes the weak functions and public prototypes re
mainboard_get_spd(), making it internal to northbridge. Changeover is
complete.
Change-Id: I1a75279d981e46505930a9ce1aae894ccc4e1f24
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76965
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous and remove devices which are turned off.
Change-Id: I0f069f02e4f0957cbff05d1bc9aa499fb51b6a02
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch uses AMD SoC common code for MCA and adds MCA bank
information as per Genoa Processor Programming Reference (PPR)
version 0.25 (#55901) and uses AMD SoC common code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If728d803d600f7e86507cd1b35b40022bf4d379e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76524
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All CPUs properly come out of reset and relocate SMM.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I8c2d976addacd5a2ba70eb629510128853b9f847
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Default value of HEAP_SIZE is 0x100000, since genoa has a lot of
CPU increase the HEAP_SIZE to 0x200000
Change-Id: Idd707200fe72730849267cd3cafc40e44f1f8c5d
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
In vboot_get_context(), vb2api_reinit() is called to restore the vboot
context from the previous stage. We use assert() for the return value of
vb2api_reinit() because there shouldn't be runtime errors, except for
one edge case: vb2_shared_data struct version mismatch. More precisely,
when RW firmware's VB2_SHARED_DATA_VERSION_MINOR is greater than RO's,
vb2api_reinit() will return VB2_ERROR_SHARED_DATA_VERSION.
To avoid using an invalid vb2_context pointer (when FATAL_ASSERTS is
disabled), change assert() to die() on vb2api_reinit() failure. For the
vb2api_init() case the assertion is unchanged because there shouldn't be
any runtime error for that.
Also move the vb2api_init() call outside the assert() argument, as
assert() may be a no-op macro depending on the implementation.
Change-Id: I4ff5ef1202bba2384c71634ec5ba12db1b784607
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The symbol VBT_DATA_SIZE_KB was removed in commit 8bde652241 -
"drivers/intel/gma/opregion: Use CBFS cache to load VBT" CB:77886,
however that patch only removed the Kconfig option from the Intel
chipsets, leaving it unused in the mainboards.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia29d8d6ec17b172e662ff591849f1668d65f1ff9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78967
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This is a fixup to CB:78914 which inadvertently broke the RK3288 SoC.
Unfortunately we can only accommodate very little PRERAM_CBFS_CACHE in
the tiny SRAM for that chip, so we would not be able to map an entire
FMAP. Solve this problem for now by mapping less space when CBFS
verification is disabled, and disallowing CBFS verification on that SoC.
Change-Id: I2e419d157dc26bb70a6dd62e44dc6607e51cf791
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Proposed in the comment of commit 29030d0f3dad
("drivers/pc80/rtc/option.c: Stop resetting CMOS during s3 resume"),
during sanitize_cmos(), only reset CMOS range covered by checksum and
the checksum itself from the file cmos.default in CBFS, in order to
prevent other runtime data in CMOS (e.g. the DRAM training data on
GM45 platforms for s3 resume) being erased.
Tested: cherry-pick this commit before commit 44a48ce7a46c ("Kconfig:
Bring HEAP_SIZE to a common, large value"), which is already
before my commit 29030d0f3dad , Thinkpad X200 with
CONFIG(STATIC_OPTION_TABLE) can resume from s3 again,
indicating that DRAM training data are no longer erased.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Co-authored-by: Jonathon Hall <jonathon.hall@puri.sm>
Change-Id: I872bf5f41422bc3424cd8631e932aaae2ae82f7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|