summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-10sdm845: qspi: Add Dual SPI supportJulius Werner
This patch adds support for the Dual SPI feature (SDR 2-bit in Qualcomm terminology) to the QSPI controller. Change-Id: I7aed2ccd9627f5de5dd760b418f74d56d2c031d3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33284 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-10spi_flash: Add Dual SPI supportJulius Werner
This patch adds support to read SPI flash in Dual SPI mode, where both MISO and MOSI lines are used for output mode (specifically Fast Read Dual Output (0x3b) where the command is still sent normally, not Fast Read Dual I/O (0xbb) whose additional benefit should be extremely marginal for our use cases but which would be more complicated to implement). This feature needs to be supported by both the flash chip and the controller, so we add a new dual_spi flag (and a new flags field to hold it) to the spi_flash structure and a new optional xfer_dual() function pointer to the spi_ctrlr structure. When both are provided, Dual SPI mode is used automatically, otherwise things work as before. This patch only adds the dual_spi flag exemplary to all Winbond and Gigadevice chips, other vendors need to be added as needed. Change-Id: Ic6808224c99af32b6c5c43054135c8f4c03c1feb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-10spi_flash: Make .read() callback optionalJulius Werner
All SPI flash chip drivers currently in coreboot use the generic read functions (spi_flash_cmd_read_fast()/_slow()) as their read callback. The only use case for specialized read callbacks we have left is with specialized flash controllers like Intel fast_spi (which sort of impersonate the flash chip driver by implementing their own probe function). This patch unifies the behavior for all normal flash drivers by making the read callback optional and letting them all fall back to a default read implementation that handles normal fast/slow reading. Most of the drivers used to install the respective callback after checking CONFIG_SPI_FLASH_NO_FAST_READ, but some hardcoded either slow or fast writes. I have found no indications for why this is and spot-checked datasheets for affected vendors to make sure they all support both commands, so I assume this is just some old inaccuracy rather than important differences that need preserving. (Please yell if you disagree.) Also take the opportunity to refactor some of the common spi_flash.c code a bit because I felt there are too many nested functions that don't really do enough on their own, and centralizing stuff a bit should make it easier to follow the code flow. (Some of this is in preparation for the next patch.) Change-Id: I2096a3ce619767b41b1b0c0c2b8e95b2bd90a419 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-06-10spi_flash: gigadevice: Adopt Winbond chip info structureJulius Werner
This patch changes the Gigadevice SPI flash driver to adopt the same structure packing improvements for the hardcoded parameters of individual chips that was implemented for Winbond last year. This cuts the size of the hardcoded info nearly in half and should save us a few hundred bytes in every stage. Change-Id: I9910dcb9b649f51b317f3f8fcba49e5e893f67d2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-10cbfs_spi: Enable speed logging by default for BIOS_DEBUGJulius Werner
The SPI transfer speed logging in cbfs_spi is super useful, doesn't get in the way (just adding one line per stage, essentially) and should have no notable overhead. Let's enable it by default for the BIOS_DEBUG log level rather than having to recompile to get it. Also fix an issue with building this code on MIPS due to lack of 64-bit division primitives. (This means MIPS and arm32 board may display incorrect results when reading more than 4MB in a single transfer, which sounds very unlikely.) Change-Id: I03c77938afe01fdcecf917e8c4c25cc29cdc764e Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-10mainboard/hp/z220_sff_workstation: remove unused header fileFelix Held
Change-Id: I4c780afaccd604a1bf4da67eea713f809744ddb2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-09acpigen: Add support for IndexFieldPatrick Rudolph
Add support for generating IndexField, which is similar to Field. Change-Id: If66a627e64953696b0b68488256bd5c141e4c205 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33032 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09autoport: Generate a libgfxinit template when IGD is detectedIru Cai
Change-Id: I213628e525cc11c502de7d538bd60f49f3a930b9 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-09mainboard/Kconfig: add option for a 6144 KB(6 MB) ROM sizeKacper Słomiński
Signed-off-by: Kacper Słomiński <kacper.slominski72@gmail.com> Change-Id: I7a1949c3512528b6b73955d907efc21728eed739 Reviewed-on: https://review.coreboot.org/c/coreboot/+/30980 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09Documentation: Add display panel specificsDaniel Maslowski
Change-Id: If1a393578556d51499c700b68187034830d19215 Signed-off-by: Daniel Maslowski <daniel.maslowski@img.ly> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-09mb/google/hatch: Add 16G 2666 LPDDR3 SPDShelley Chen
One variant is asking for support for 16G 2666 LPDDR3, so adding generic SPD for that. BUG=b:133455595 BRANCH=None TEST=None as this is not being used yet Change-Id: If16a101119aabc30d6ea83e95e9ded2e089a982d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-09mb/google/hatch: Add 8G 3200 SPDShelley Chen
One variant is asking for support for 8G 3200 DDR4, so adding generic SPD for that. BUG=b:132920013 BRANCH=None TEST=None as this is not being used yet Change-Id: I89cd3287aaf0baf384c4fe82d0881b0c48e09753 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33258 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09mb/intel/icelake_rvp: Update FSP-M UPDs to support iclrvp memory initAamir Bohra
Change-Id: Ib55fdfae6e9320c44761682fc134be0731de0fcf Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32522 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09mb/google/dragonegg: Pass FSP-M UPD as per dragonegg requirementSubrata Banik
TEST=Able to boot dragonegg board with LPDDR4 memory. Change-Id: Idbe0aa79879f2b1a754dd1f6718ad4ba1173e760 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31956 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09soc/intel/icelake: Pass FSP-M/S UPD as per ICL requirementAamir Bohra
1. Gfx stolen memory requirement for ICL GFX 2. Enable PeiGraphicsPeim support Change-Id: I22dd14249b7402873f1ac07bee164ee7bee36414 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31955 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09vendorcode/intel/../icelake: Update ICL FSP header BIOS version 3092Subrata Banik
After building from here : https://chrome-internal.googlesource.com/chromeos/third_party/intel-fsp/icl/+/refs/tags/upstream/BIOS_Version_3092 Change-Id: I8924dbf4a8d6a303540ced1c9c48586d26d6beaa Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2019-06-09soc/intel/common: Skip SoC GT programming based on CONFIG_SKIP_GRAPHICS_ENABLINGSubrata Banik
Skip GT specific programming in coreboot to support early parts without GT enable. Change-Id: I231e13367cbfbafbfb0cb4235487dbcbcae76820 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33189 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08Kconfig: Guard RAMPAYLOADNico Huber
The RAMPAYLOAD symbol added by 7e893a02c0 (Kconfig: Create RAMPAYLOAD kconfig) is shown unconditionally for all x86 systems. It generally creates a lot of confusion to prompt for something that isn't imple- mented or not working. So guard it with another Kconfig that can be selected by platforms that actually support it. Change-Id: I6d158382d1000b8b40ca1368e2efff0c39884f15 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33263 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08mb/lenovo/t430: Fix Dual GraphicsPatrick Rudolph
* Select ONBOARD_VGA_IS_PRIMARY in driver/lenovo/hybrid_graphics to fix disabling iGPU in 'Dual Graphics' on Lenovo T430. * Remove ONBOARD_VGA_IS_PRIMARY in mainboards that already select DRIVERS_LENOVO_HYBRID_GRAPHICS. Change-Id: I6594fbb957c9a8135fe670d38b5755adf29d2dff Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-08nb/intel/sandybridge: Drop iommu.c and rename functionsPatrick Rudolph
* Move the contents of iommu.c to early_init.c. * Name the functions like done in intel/soc/common. * Move PAMx register setup to own function Preparations for integration in soc/intel/common/* Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: I3ec395bf6722bceb84316e92733dcfcd7a093639 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32068 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/acpi: Remove Return for PS0/3Christian Walter
Remove the Return statement within the PS0, PS3 methods. PS0/3 are not allowed to return anything. Even an empty return will be resolved to Return(Null). In order to be conform with the specification, the code has been refactored to remove the return statements. Change-Id: I7b4820e8dd40a9169a7facce67282b8af5af67af Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33293 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/bootblock: Add SPT C236 to PCH TableChristian Walter
Add Skylake C236 to the PCH Table. The one which was already in there is actually the CM236 and not the C236. This can be checked in datasheet: 100-series-chipset-datasheet-vol-1 p. 25. Change-Id: I435927f15e9d3219886375426b09c68632dfe3d9 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-08northbridge/gm45: document that raminit doesn't support mirrored ranksFelix Held
Change-Id: I8a66a1355974f6771c5e4bae0dc60da2447122d1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-07sb/amd/sb700: Fix misleading formattingMarshall Dawson
Change-Id: I65872d6f1d71d050c8589d3616340648cf95048b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-07ifdtool: Enable GbE/PDR/EC region access only if they existDuncan Laurie
Instead of assuming GbE/PDR/EC regions may exist or not, check if there is a valid region defined in the descriptor and set the region access permissions based on that. The net effect change is to enable the use of the PDR region on the sarien platform, which also uses the GbE and EC regions. This results in the following example changes: mb/google/sarien (GbE, PDR, EC) . DESC BIOS ME GbE PDR EC -BIOS r rw rw r ------------------------------- +BIOS r rw rw rw r mb/google/eve: (no GbE, no PDR, no EC) . DESC BIOS ME GbE PDR EC -BIOS r rw rw r -ME r rw r -GbE r rw -EC r rw ------------------------------- +BIOS r rw +ME r rw +GbE +EC BUG=b:134703987 Change-Id: I7aeffc8f8194638c6012340b43aea8f8460d268a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33273 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-07ec/google/wilco: Add UCSI supportDuncan Laurie
This change adds support for the UCSI specification in order to provide information about the Type-C port and an interface to perform power and data role swap. This change is split across the DSDT and SSDT, with the shared memory and operation region declared in the SSDT after being allocated in CBMEM. The OS will fill in the registers in the system memory region and then call the _DSM method wtih a read or write argument. The DSM method will copy the required registers to/from the system memory and the EC and perform the write or read action. Responses from the EC will generate a new SCI with event code 0x79 which will notify this UCSI ACPI device and the OS driver will take action to read status from the EC. BUG=b:131083691 Change-Id: I438a2bdfaf6720acd8354e0339dcef2844b63a4e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-07cbmem: Add ID for UCSIDuncan Laurie
The USB Type-C Connector System Software Interface (UCSI) defines a required memory oregion for the OS UCSI driver to use to communicate with the BIOS and EC. This provides a CBMEM ID that can be used by drivers to allocate this shared memory region for the UCSI driver to use. BUG=b:131083691 Change-Id: Id5b7fa19436443bc11a6ebe3ce89cd552cee4d85 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-07soc/intel/cannonlake: Add _DSM method for SD controllerV Sowmya
The SD controller seems to take some time after restarting the clock at 1.8V before it actually switches from 3.3V to 1.8V. Add a _DSM method that simply sleeps when switching between 3.3V and 1.8V. Otherwise, the kernel times out too quickly waiting for the card to acknowledge the 1.8V switch. The card itself is waiting until it sees the clk signal being driven at 1.8V. BUG=b:125441242 TEST=Boot Hatch with SD card and CR2 removed, observe voltage switch succeeds. Change-Id: I15090ed9f9bc90b35dfcba47c913e3d37b799d0b Signed-off-by: V Sowmya <v.sowmya@intel.com> Signef-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-07soc/intel: Add some missing MCH PCIe IDsKeno Fischer
These are documented in the Intel Datasheet entitled "6th Generation Intel® Processor Datasheet for S-Platforms" "6th Generation Intel® Processor Datasheet for H-Platforms" (Volume 2) Without them, coreboot fails to properly inform the payload of the amount of available memory. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Change-Id: I5b810c6415c4aa0404e5fa318d2c8db292566b8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/33286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-06mb/google: Add GPU panel settings for SKL/KBL boardsNico Huber
The values are generated from the respective VBTs. Change-Id: Ic74e9dac898c17ce64a94b06682997a39daeff69 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30247 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/intel/skl/graphics: Implement panel setupNico Huber
Logs from Linux' i915 suggest that not even the FSP/GOP takes proper care of this. The sequence is mostly the same as on older platforms, with a slightly different configuration of the backlight PWM. We light the panel up with 50% PWM duty cycle. This often results in an already rather high perceived brightness, but shouldn't be too blinding. Change-Id: I762a77c8df023a4c14af502af5edfeeb961da1ae Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-06soc/amd/common: Make biosram functions more readableMarshall Dawson
Modify the 16 and 32 bit BIOS RAM access functions that had been originally moved from stoneyridge. This was suggested in the review of 69486cac7: Create AcpiMmio functionality from stoneyridge Change-Id: I5b491da6f263cbab2b549301e16a7e19896f2428 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32932 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Update AcpiMmio commentsMarshall Dawson
Document the AcpiMmio individual blocks better. This is in response to a request in gerrit for 69486cac7: Create AcpiMmio functionality from stoneyridge Correct comments that were inadvertently left in place from older patches. Change-Id: I4c16a866de5622e8cfbd3a08816b9d3182950d0e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32931 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06qcs405: Enable VBOOT_MIGRATE_WORKING_DATANitheesh Sekar
Enable VBOOT MIGRATE_WORKING_DATA so that the data required by depthcharge is copied into the coreboot tables and made available to depthcharge after BOOT_IMEM is cleansed. Change-Id: I0317b73d24b07553672695998589f86677e0be64 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-06-06qcs405: Add PRESERVE flag for RO_VPDNitheesh Sekar
Add PRESERVE flag to preserve the VPD data. Change-Id: I78ab4de31030465345c5ae58813bfed5e27494fb Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33020 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Fix consistency in AcpiMmio argumentsMarshall Dawson
Change all arguments named "offset" to "reg" to match the others. These should have gone into change 69486cac7: Create AcpiMmio functionality from stoneyridge Change-Id: Ifdd00d0a5d1e03bfa68a13eeece2d2cfd56aa39d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32930 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Clean up prototypes for AcpiMmioMarshall Dawson
Reorder the biosram prototypes to match the rest of the file. Remove prototypes for asf 32-bit functions that have not been implemented. Change-Id: Ic2663158d8a71952c26eb37f34342a6ea5e58a42 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32929 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06src/amd/stoneyridge: Move alink source to commonMarshall Dawson
Relocate the alink access functions out of stoneyridge where they were dead code. This source maintains the ability to access all register spaces, however more modern APUs define only ABCFG in the BKDGs. BUG=b:131682806 Change-Id: I5c558ccc64bd04a66399c678d43beb0a97e72f63 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32663 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Add ALink-AHB Bridge to iomap.hMarshall Dawson
Add the address and replace the hardcoded value in the ASL code. Change-Id: If0b99de78d8c5948e2e5f2aa50dfc2efc1bd1ba1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32662 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move sata to commonMarshall Dawson
Relocate generic sata support from stoneyridge to common/block. BUG=b:131682806 Change-Id: I4e9eddaa291e5e03f4f8d88826973c5b8ee9a1c5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32661 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Split sata functionalityMarshall Dawson
Separate chipset-specific source from sata_init(), and modify it to better match coreboot conventions. A subsequent patch will move the generic portion to soc/amd/common. The support for enabling port multipliers appears to have been first added for Kabini. Although missing from the documentation, the ability to affect the HBA Capabilities Register seems to remain for Stoney Ridge. Change-Id: I5dd9f613d36badc3e4d185a22b4475cb82ce187e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32660 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Remove sb_util.cMarshall Dawson
Obsolete pm_acpi_pm_cnt_blk(), and remove it and pm_acpi_pm_evt_blk(). Relocate the remaining functions to get/save UMA information to southbridge.c. Change-Id: I90c4394e3cf26f4ad60a078948a84303bda693d0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32659 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06nb/intel/pineview/raminit.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I4faf698e904c461803e867d212c31958119cc0ca Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Relocate acpi_get_sleep_type()Marshall Dawson
Move the function into common code. Convert it to use the memory- mapped access type. Convert vboot_platform_is_resuming() to call it instead of duplicating the source. BUG=b:131682806 Change-Id: I245bebb8dc2d331cdd56acfb245a004536b792ab Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32658 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move IOMMU support to commonMarshall Dawson
BUG=b:131682806 Change-Id: Icb02180645c9e7e6dc973438c777228b031b3f54 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32657 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move hda.c to commonMarshall Dawson
BUG=b:131682806 Change-Id: I1aa869584fd6743101c07a6a508abff6426df18d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32656 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Relocate MMIO access of ACPI registersMarshall Dawson
The AcpiMmio block allowing direct access to the ACPI registers has remained consistent across AMD models. Move the support from soc//stoneyridge to soc//common. BUG=b:131682806 Change-Id: I0e017a71f8efb4b614986cb327de398644599853 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32655 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Rework block/acpiMarshall Dawson
The halt.c file relies on the ACPI register block in the AcpiMmio range. This register block is consistent across AMD device generations, so to prepare for moving additional stoneyridge support to this directory by changing the file name and add a Kconfig symbol to control the build. BUG=b:131682806 Change-Id: I2f7442dd78bced7f69b0416a8cd751291f82151f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32654 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move LPC support to commonMarshall Dawson
AMD devices traditionally have the LPC-ISA bus at 14.3 and the definition has been very consistent. Relocate the feature from stoneyridge into common/block. BUG=b:131682806 Change-Id: I8d7175b8642bb17533bb2287b3e3ee3d52e85a75 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32653 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Rework SPI base address get/setMarshall Dawson
A subsequent patch will move the soc//stoneyridge LPC functionality to a common directory. Prepare by reworking the SPI BAR configuration function in southbridge.h. The SPI BAR is not a typical PCI BAR, and is at D14F3xA0. Change-Id: I73ddb4afaf9e67ca0522ecb6085b23c92fedc461 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32652 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move GPIO support to commonMarshall Dawson
The banked GPIO functionality in the AcpiMmio block has been consistent since the Mullins product. Move the basic support into a common directory. Each product's pin availability, MUXes, and other details must remain specific to the product. The relocated source also drops the weak configure_gevent_smi() that reports SMI is not available. The stoneyridge port relies on SMI to do its initialization, similar to modern soc/intel devices. This is the plan for future soc/amd ports, so make a missing function a build error instead of a runtime warning. BUG=b:131682806 Change-Id: I9cda00210a74de2bd1308ad43e2b867d24a67845 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-06Makefile.inc: Compile smm files independent ARCH_RAMSTAGE_X86_32/64Subrata Banik
This patch makes smm related files compile independent of ramstage getting compiled. If user selects RAMPAYLOAD to boot without ramstage, there will be need for smm code to get compiled independently. Change-Id: I17a3eb80a4d5ef86e0319357c01b6bf5b90ef15b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06Revert "libpayload: Reset PS/2 keyboard"Nico Huber
Documentation is scarce on the matter, however the related coreboot code suggests that after the ACK, the keyboard also sends the result of the self test (passed/failed). It looks like this result is never consumed here, probably resulting in further confusion for later com- mands. Let's revert this for now (if it's not too late for the 4.10 release) and break things later again. IMHO, due to the fact that there are dozens of different keyboard controller and keyboard implementations and no accurate specification followed, such changes should be tested on a lot of hardware before merge. This reverts commit a99ed13e3397bc536012120aab8cadb827913863. This reverts commit 7ae606f57f0b3d450ae748141b0e2367041b27d3. Change-Id: I4d4304d5d8a01e013feac61016c59bcaeea81140 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-06sb/intel/ibexpeak: Copy the sandybridge bootblock.c fileArthur Heymans
This allows to port C_ENVIRONMENT_BOOTBLOCK to sandybridge separately from nehalem. Change-Id: If3c6619cf22d1e2995eb19823b0f3f969d252b3b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-06mb/hp: Add Z220 SFF workstationPatrick Rudolph
* Add initial board commit based on HP8200 SFF. * Add documentation. * Serial and PCIe slot are working. Tested on HP Z220. Change-Id: I75987a7ea9a008a64281f0d5ab27e5148d36a4ec Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33207 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06src/soc/intel/common/smbios: Add addtional infos to dimm_infoChristian Walter
Add ECC Support and VDD Voltage to dimm_info struct. Now Bus Width and ECCSupport will be propagated correctly in SMBIOS Type 17 Entry. Change-Id: Ic6f0d4b223f1490ec7aa71a6105603635b514021 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33031 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06siemens/mc_apl5: Add own GPIO tableMario Scheithauer
Because of some differences to the baseboard this board variant needs its own GPIO table. Change-Id: Ie3424cb0b867c5d43cd7db9e9ae654196cef5e90 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-06-06sb/intel/i82801gx: Detect if the southbridge supports AHCIArthur Heymans
This automatically detects whether the southbridge supports AHCI. If AHCI support is selected it will be used unless "sata_no_ahci" is set in the devicetree to override the behavior. Change-Id: I8d9f4e63ae8b2862c422938f3103c44e761bcda4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-05mb/google/hatch: Increase RW_LEGACY to 1M for 16MB BIOSShelley Chen
The RW_LEGACY section needs to be minimum 1M. For the 16MB BIOS region, we had this region set too small, which was causing the firmware_FMap FAFT test to fail. BUG=b:133857135, b:129464811 BRANCH=None TEST=test_that -b hatch <IP> firmware_FMap Change-Id: Ie6311613ca3bb08e7f058a41d12f9a1153dc9c5e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-06-05coreboot: Add i2c clock API for qcs405Taniya Das
Add support of i2c clock enable, disable and configure API. Change-Id: Ia0b42357ac09bf0ab60aad18c44e5ef27fe9dac3 Signed-off-by: Shefali Jain <shefjain@codeaurora.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32545 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-05southbridge/intel/fsp_rangeley: Fix wrong parameters passed to outwHannah Williams
outw takes (value, addr) not (addr, value) Change-Id: I6c00413ce9b9b6a3d5691d71ade2b12b08538622 Signed-off-by: Hannah Williams <hannah.williams@dell.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-05MAINTAINERS: Add maintainer to Facebook FBG1701Frans Hendriks
Add maintainers to the new mainboard port. Change-Id: I620ea424cc26fa0218a74052863ea30700789e1b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-06-05mainboard/facebook/fbg1701: Do initial mainboard commitFrans Hendriks
Initial support for Facebook FBG-1701 system. coreboot implementation based on Intel Strago mainboard. Configure 'Onboard memory manufacturer' which must match HW. BUG=N/A TEST=booting SeaBIOS and Linux 4.15+ kernel on Facebook FBG-1701 Change-Id: I28ac78a630ee705b1e546031f024bfe7f952ab39 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-05lib/Makefile.inc: Add hexdump.c to postcar stageFrans Hendriks
hexdump() is not available in postcar stage. Add hexdump() functionality to postcar stage. BUG=NA TEST=Booting Embedded Linux on Facebook FBG-1701 Change-Id: Ibdce911065c01b0a1aa81dc248557257d0e420b0 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-06-05src/drivers/intel: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects pointer fih as FORWARD_NULL. Add sanity check for fih to prevent NULL pointer dereference. BUG=CID 1401717 TEST=Built and boot up to kernel. Change-Id: Ia6853e5302c87d9ffe52b942f067be56f6e77406 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-06-05nb/intel/x4x: Remove variable set but not usedElyes HAOUAS
Change-Id: I142ae6f7806b3f57b98a158e8f26592aed8fa452 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32939 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-05src/arch/x86: Prevent attack on null pointer dereferenceJohn Zhao
Clang Static Analyzer version 8.0.0 detects null pointer argument in call to memory copy function. Add sanity check for pointer header to prevent null pointer dereference. TEST=Built and boot up to kernel. Change-Id: I7027b7cae3009a5481048bfa0536a6cbd9bef683 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-05sb/intel/i82801gx: Include chip.h directlyArthur Heymans
Change-Id: I3d743e90444292be687999ab4f50aa89d514fbad Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33171 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-05mb/*/devicetree.cb: Remove unavailable PCIe portsArthur Heymans
Some variants only support 4 PCIe ports so there is no need to have those unavailable ports in the devicetree. Change-Id: I154cae358fb7f862fc0c8eaa620474b37b5e6484 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30821 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04mb/google/sarien: Fix SSD's power off sequence before going to S5Roy Mingi Park
BUG=b:133389422 TEST=check SSD's power off sequence to meet PCIE requirement. SSD's reset should be cleared before clearing SSD's power EN Pin. Change-Id: Ia106b805deafb8a442b56bcce91b51135cb32988 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33182 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04qcs405: Add SPI driver supportPrudhvi Yarlagadda
Add SPI driver support in coreboot. Change-Id: I813ba0b5cc8344c463c3e41ff6db80bc0d8ebd96 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32058 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04qcs405: Add UART supportPrudhvi Yarlagadda
Add support for UART driver in coreboot. TEST=build & run Change-Id: Id9626c68eadead8b8ec5ffbc08cab7b0ec36478f Signed-off-by: Prudhvi Yarlagadda<pyarlaga@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29964 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04libpayload: Add UART for qcs405Prudhvi Yarlagadda
TEST=build Change-Id: I43164cf9eacc844af1d048f7b6ebbda96fc9d202 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-04kconfig: Drop IS_ENABLED() macroNico Huber
We keep its definition in libpayload, though, to maintain compatibility with existing payload code. For now. Change-Id: I8fc0d0136ba2316ef393c5c17f2b3ac3a9c6328d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-04nb/intel/x4x/rcven.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I13d6593e283f0a9e6603e19ccfda116f3b145e52 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32948 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04util/lint: Make usage of IS_ENABLED() an errorNico Huber
As long as we keep the IS_ENABLED() definition in libpayload for compatibility, we should check that IS_ENABLED() usage doesn't sneak back in. Also remove all other IS_ENABLED() checks. Change-Id: Id30ffa0089cec6c24fc3dbbb10a1be35f63b3d89 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-04mb/apple/macbookair4_2: Fix DRAM_RESET_GATE_GPIOEvgeny Zinoviev
It's GPIO28 according to schematics. Change-Id: I55be1ed178c818a17766e22cb2fd010412b8fe02 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-04drivers/fsp20: Fix spelling in help textFelix Singer
Change-Id: Iab8d20a385bde31b29fa7766a87753fcc2d759b8 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-04soc/intel/braswell: Use common cpu/intel/car codeArthur Heymans
The code in cpu/intel/car/romstage.c Does most of the things like setting up timestamps, stack guards, entering postcar. A functional difference is that the FSP header is searched for twice instead of passed from the CAR entry to the C code. When using C_ENVIRONMENT_BOOTBLOCK this needs to be done anyway (or a special linker symbol kept across multiple stages is needed, which is likely not worth the speedup). Change-Id: I0f03e5a808f00157fdd807b104417a54e4bde7b2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-04device_tree: Make FDT property data non-constJulius Werner
FDT property data should not be const -- sometimes we need to update it, for example when fixing up phandles in an overlay. On the other hand it's occasionally desirable to put a string constant in there without having to strdup() it all the time... let's just live with the tiny implicit assumption that the data we'd want to modify (phandle references, mostly) will never be added from string constants, and put a cast in dt_add_string_prop(). Change-Id: Ifac103fcff0520cc427ab9a2aa141c65e12507ac Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32868 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Match debug output format to dtc -O dts outputJulius Werner
This patch updates the device tree dumping functions (not compiled by default but available for debugging) to output properties and nodes in a format similar to .dts files that is very close to what dtc outputs when you decompile a .dtb with it. This makes it easier to match device tree dumps from coreboot with device tree dumps generated by other device tree tooling. This patch was adapted from depthcharge's http://crosreview.com/1536386 Change-Id: Ib40e50d906aff05473a70c4fc9b124d63232558c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32867 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Add support for aliasesJulius Werner
This patch adds support to lookup nodes via the "/aliases" mechanism in device trees. This may be required for overlay support (don't quite remember tbh) and is also just a generally useful feature. It was adapted from depthcharge's http://crosreview.com/1249703 and http://crosreview.com/1542702. Change-Id: I1289ab2f02c4877a2d0111040384827e2b48a34a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32866 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Have absolute paths start with '/'Julius Werner
Currently DT paths are *not* expected to start with '/'. This is not what the spec says (see Devicetree Specification v0.2, 2.2.3 Path Names) and also not what is done by Linux. Change dt_find_node_by_path() to expect paths to start with '/' and add a leading '/' to all DT path strings. Besides the compatibility with the spec this change is also needed to support aliases in the future. This patch was adapted from depthcharge's http://crosreview.com/1252770 Change-Id: Ibdf59ccbb4ead38c6193b630642fd1f1e847dd89 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32865 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Drop sub-node path lookup from dt_find_node_by_path()Julius Werner
Besides looking up a node with an absolute path dt_find_node_by_path() currently also supports finding a sub-node of a non-root node. All callers of the function pass the root node though, so it seems there is no real need for this functionality. Also it is planned to support DT path names with aliases, which would become messy in combination with the lookup from a sub-node. Change the interface of dt_find_node_by_path() to receive the DT tree object instead of a parent node and adapt all callers accordingly. This patch was adapted from depthcharge's http://crosreview.com/1252769 Change-Id: Iff56be4da2461ae73a7301dcaa315758d2a8c999 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32864 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Add phandle caching and lookupsJulius Werner
This patch caches phandles when unflattening the device tree, so we don't have to look up the phandle property again every time we're trying to find the phandle of a node. This is especially important when supporting phandle lookups, which are also added. In addition we keep track of the highest phandle in the whole tree, which will be important for applying overlays later. With this, dt_get_phandle(node) becomes obsolete because the phandle is already available as a member variable in the node. This patch was adapted from depthcharge's http://crosreview.com/1536385 Change-Id: I9cbd67d1d13e57c25d068b3db18bb75c709d7ebe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32863 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Add version checksJulius Werner
This patch adds a few more sanity checks to the FDT header parsing to make sure that our code can support the version that is passed in. This patch was adapted from depthcharge's http://crosreview.com/1536384 Change-Id: I06c112f540213c8db7c2455c2e8a4e8e4f337b78 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32862 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04device_tree: Switch allocations to xzalloc()Julius Werner
The FIT code is already using xzalloc() everywhere, and that's the only real consumer of device tree code right now. Chances are if you're trying to unflatten an FDT and it doesn't fit into the heap you're pretty much screwed anyway, so all the OOM handling feels a bit unnecessary (and some functions will just silently fail because they don't have a return value, which is bad). Let's just switch this all to die on failed allocations. Change-Id: I738f24d550a776653b2becd3d4f7d4d2cb3cc048 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32861 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04mb/google/hatch: Enable LTR for PCIe portsFurquan Shaikh
Enable LTR for NVMe and WiFi PCIe ports so that they can use ASPM L1.2 BUG=b:134195632 TEST=Verified L1 substate with lspci on hatch: Before: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ After: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ Change-Id: I7fce60897b78dde12747ac7fb857c988d16118ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33161 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04libpayload/i8042/keyboard: Fix return value check for keyboard_cmdFurquan Shaikh
CB:32951 ("libpayload: Reset PS/2 keyboard") added a call to reset keyboard and check the return value of keyboard_cmd() to compare against I8042_KBCMD_ACK. However, keyboard_cmd() already checks for ACK and returns 1 or 0 based on whether ACK is received. This change fixes the check introduced by CB:32951 to compare against 0 just like the other checks for keyboard_cmd(). Additionally, it adds error messages for all failed commands in keyboard_init() to make the prints consistent in case of failure. BUG=b:134366527 TEST=Verified that logs do not contain "ERROR: Keyboard reset failed" anymore. Change-Id: Idcadaae12e0a44e404a1d98c6deb633d97058203 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-06-04vendorcode/eltan: Add vendor code for measured and verified bootFrans Hendriks
This patch contains the general files for the vendorcode/eltan that has been uploaded recently: - Add eltan directory to vendorcode. - Add documentation about the support in the vendorcode directories. - Add the Makefile.inc and Kconfig for the vendorcode/eltan and vendorcode/eltan/security. BUG=N/A TEST=Created verified binary and verify logging on Portwell PQ-M107 Change-Id: Ic1d5a21d40b6a31886777e8e9fe7b28c860f1a80 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-06-04soc/intel/cannonlake: Do not read SPD again if index hasn't changedFurquan Shaikh
With the recent refactoring of memory configuration in CB:32513 ("soc/intel/cannonlake: Support different SPD read type for each slot"), meminit_cbfs_spd_index ends up reading SPD from CBFS for each slot. However, for mainboards that use the same SPD index for each slot this is unneccessary. This change adds a check to see if spd_data_ptr is not NULL and current spd index is the same as the last call to decide if SPD read from CBFS should be skipped. TEST=Verified that SPD gets read only once on hatch. Change-Id: I91963b55cea534c92207b2cd9f0caa96df8f222b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33137 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04arch/riscv/Kconfig: Make correct default value for CONFIG_ARCH_RISCV_MSubrata Banik
Change-Id: Ib9329904060cab48d527de1b1ccdab5b6fe71b99 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33144 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03mainboard/intel/saddlebrook: Remove unused functionsArthur Heymans
Setting up the SIO serial console is done in the bootblock. Change-Id: Ideaf8f3dc0ee067e96d3fb5046071551c6d45329 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32985 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03src/soc/intel: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects pointer mem_info as NULL_RETURNS. Add sanity check for mem_info to prevent NULL pointer dereference. BUG=CID 1401394 TEST=Built and boot up to kernel. Change-Id: I9d78ab38b8b2dd3734e0143acfd88d9093f16ce6 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33152 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03soc/intel: Replace UART_BASE() and friends with a KconfigNico Huber
Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident on APL at least. It is used outside of soc/intel/ scope, e.g. to con- figure SeaBIOS. As we only ever configure a single UART for the coreboot console, we don't need different addresses for each possible UART. Which saves us a lot of code. Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-03sb/intel/i82801ix: Select SOUTHBRIDGE_INTEL_COMMON_SPIArthur Heymans
This allows to use the CONFIG_CONSOLE_SPI_FLASH. Change-Id: I563c69ce6337d46380f889f42633e858ac207916 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-03src/soc/intel/common/block/sgx: Add missing new linesChristian Walter
Added missing new lines to Debug Output. Change-Id: I30f208a60661451bc0794c705113e8d19a68b0eb Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33035 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03soc/amd/stoneyridge: Fix alignment in iomap.hMarshall Dawson
Change-Id: I79e8bc425d5db45abaeb655f86773f3bb1b2f8c4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-03sb//nvidia/mcp55/mcp55.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I40cae58a7a7c9c3c20367541853001510a59e42b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33061 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03nb/amd/pi/00630F01/northbridge.c: Remove variable set but not usedElyes HAOUAS
Change-Id: Id5e762880ddfcb65872a50e8ffe10d86b3719b5d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 08:21:37 +0000