| Age | Commit message (Collapse) | Author |
|---|
|
This change gets rid of unused dev param to pmc_set_afterg3.
BUG=b:136861224
Change-Id: Ic197d6fb8618db15601096f5815e82efc2b539c1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
PMC device gets hidden from PCI bus after FSP-S call. Thus, it gets
removed from the root bus as leftover unused device. With change
903b40a8a46 ("soc/intel: Replace uses of dev_find_slot()"), all uses
of dev_find_slot() were replaced by pcidev_path_on_root() which relies
on scanning of root bus to find the requested device. Since PMC device
is removed from the root bus, pcidev_path_on_root() returns NULL for
it thus resulting in configuration being skipped for the PMC
ultimately resulting in S3 failures.
Since the PCH_DEV_PMC was just used to get to chip config, this change
replaces the use of PCH_DEV_PMC with SA_DEV_ROOT.
BUG=b:136861224
TEST=Verified that S3 works fine on hatch.
Change-Id: Ie5ade00ac2aca697608f1bdea9764b71c26e2112
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
fms() and fls() returns an 'unsigned int'.
Change-Id: Ia328e1e5a79c2e7606961bb1b68c01db6b77da21
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33817
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We have 3 similar Lenovo mainboards - x60 (oldest), t60, and z61t (most
recent addition). The only one with two consequent 2s as the C-types
is t60:
static acpi_cstate_t cst_entries[] = {
{ 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } },
{ 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } },
{ 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } },
};
It seems that 3 could be a better choice for the last line here.
UNTESTED on a real hardware.
Change-Id: I090e82d5f4ae25c768ff45a01a8dd76ff8a96a90
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Similar to CB:33940, fix outb orders.
Change-Id: I1d35235abc7e02e6058f07809b738635861cc9e4
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jackpot51@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Family 17h will not use the Arch2008 (a.k.a. v5) wrapper. Remove
all source, support functions, and comments related to AGESA.
Family 17h requires v9 which has no similarities to v5 for
integration into a host firmware. AGESA v9 support will be added
via subsequent patches into the appropriate locations.
Change-Id: Iea1a41941a0ba364a6abaaf31cc8e1145db4a236
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When system shuts down, RTC enable eosc calibration feature to save
power. Then coreboot RTC driver needs to call rtc_enable_dcxo function
at every boot to switch RTC clock source to dcxo.
BUG=b:128467245
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Iee21e7611df8959cbbc63b6e6655cfb462147748
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
outb accepts a value followed by a port
Change-Id: I6fe3961b4f8cb2454e3b2564c3eae6af06c9e69d
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33940
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch increases PRERAM_CBMEM_CONSOLE_SIZE to fix
*** Pre-CBMEM romstage console overflowed, log truncated! ***
issue.
TEST=Verified on Hatch CML platform.
Change-Id: I2de4ca2f2001b304850c27df1b3c3b2c827fe25a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Spoorthi K
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
As per EDS Sata port implemented register is byte width (bits[3:0]) hence
converting required DWORD based read/write to BYTE width read/write.
TEST=Able to boot from SATA device on CML hatch.
Change-Id: I545b823318bae461137d41a4490117eba7c87330
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34070
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some of the values used for GPIO_CFG and MISCCFG were not correct,
causing GPEs to not work correctly. This adjusts them according to the
values found in the original ACPI tables for the System76 Gazelle.
Unfortunately, the Intel documentation[1] mentioned below is
also incorrect. I have mentioned this to Intel already. The source
for the Intel CoffeeLake FSP also confirms these new numbers.
This was tested on a System76 Gazelle (gaze14). The EC uses GPP_K3 for
its GPE and GPP_K6 is used for the lid switch GPE. Both function
correctly after applying this change.
[1] Intel Document #572235:
Intel ® 300 Series Chipset Families
Platform Controller Hub
External Design Specification (EDS) - Volume 2 of 2
Change-Id: I4ecc9552468037598ef5d4e10122d660dcbfe71d
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ie9adb60323742d379cc4ad0af069a793b9ddd79b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33330
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is occasionally useful to print a uintmax_t or intmax_t, so add
support for the j specifier. This also makes defining the PRI* macros
in <inttypes.h> simpler.
Change-Id: I656e3992029199b48e62a9df2d56f54c34e4e10f
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
vtxprintf() can only print numbers in base 8, 10, and 16, so the
extra letters in the alphabet aren't needed.
Change-Id: I6a51c13f3298a597e801440f86bf698bdd8c736a
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
While running the s0ix cycling test, we observed SMM Handler caused
a stack overflow. This error happens during event log access.
This change is to increase the SMM_MODULE_STACK size to 0x800
BUG=b:135551854
TEST=suspend_resume test pass 500+ cycles, originally issue happenes
within 150 cycle
Change-Id: Ib4686b4d2d4fc3976068779314f4ee15ef4a8ae2
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
To call dev_find_slot(0, xx) in romstage can produce
invalid results since PCI bus enumeration has not
been progressed yet.
Replace this with method that relies on bus topology
that walks the root bus only.
Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Wrap the simple romstage implementation to be called
from ramstage.
Change-Id: Iadadf3d550416850d6c37233bd4eda025f4d3960
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31755
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Find the NIC device based on the PCIe root port function.
Change-Id: Ia8c6e115c9b836ee60862427dfc9d46ca3dd1b69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Like the line above it, this should be & instead of | (otherwise it will
always incorrectly return true). spi_locked() is only used internally to
decide which opcodes will be used to talk to the flash, and if it is
falsely reported as locked, the worst case should be a denial of service
(unless there are more bugs).
Change-Id: I5208b523c815d15d7263594f06ccfacd8a9510b1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402092
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I1e66ff3fe7462dfeae2a7ce7e3a8083cf90a15f9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33936
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With VBOOT=y && VBOOT_MEASURED_BOOT=y message
digest will be allocated from the stack and
1 KiB reserve used with the recent platforms
was no longer sufficient.
The comment of LZMA scratchpad consuming stack
was obsolete for postcar, so these can be reduced
to same 4 KiB.
Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Use of romstage_ram_stack_bottom() was invalid, it
potentially uses a different ROMSTAGE_RAM_STACK_SIZE
from the postcar_frame_init() call.
If alignment evaluated to 1 MiB, that WB MTRR may not
have covered all of CBMEM range, having some impact
on boot speeds.
There is no need to accurately describe write-back
MTRR ranges for postcar.
Change-Id: Icb65cef079df56fadcc292c648cab8bdbb667f47
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This reverts commit f70cb8bf968af75669325104756464ce6f4b824b.
It was merged prematurely with some vague argumentation in the commit
message and not all issues of reviewers were addressed.
Change-Id: Ia336f3499fb29976a6b80383ef8b0f3d552f5640
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
It's forbidden to use dereference CAR_GLOBAL variables
directly. The notation fails after CAR teardown for
romstage.
Change-Id: I6e6285ca0f520608c2a344517fbac943aeb36d87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33995
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1d0940a08f7ae5901b812618a6859c4297274591
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I02e6fdcd6685e0dd3fa7872b054ebe508157a0ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33758
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ib000e12cd568dd83b9533efe66e67878b806b3f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I02b279a2b625ecbdf827cb4643d772eb81ddfe70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Remove the mailbox call to notify the PSP that DRAM is ready. This
is not supported on Family 17h.
Remove the selectable SMU firmware. This is a feature of the PSP
bootloader and the standard bootloader doesn't contain the ability.
Clean up additional mentions of PSP within picasso.
Change-Id: I8abeb4c375dbff3b438cd18ccaaf66e11c86e72e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
The command line options for picasso will look different than
stoneyridge. Remove the fanned/fanless distinction to simplify
the makefile.
Picasso will use subprograms instead of fanned/fanless SKUs.
Change-Id: I50d8751e14b00ca53a6498f8e6c7f3f42543dace
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33753
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie9cf361ed0caba9c73727453c4a503557edc854d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I9d0098082c224bbf5ab2b4f0f41eb8b5b729eec7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Picasso doesn't implement the AcpiMmio XHCI_PM registers. Remove
source that uses these. Remove USB devices from the AOAC registers.
Remove the D0/D3 support from ASL, including all supporting xHCI
firmware loading support. Remove xHCI firmware from amdfw.rom.
Change-Id: Iae4c72c5a8e353ca8db02d04735f8d2b28441793
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Remove the hudson-style support for the Gigabit Ethernet Controller.
Change-Id: I2124b949a866148a97d9cd6e7fd418f7de8e2216
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Convert all remaining stoneyridge names to picasso.
Change-Id: I0ed3eaa5b1d2696448ae18b62c7218de59c61883
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Add a utility to generate a compressed BIOS image for AMD Family 17h.
If the input is an elf file, the utility extracts the program portion
for compression. Otherwise the file is compressed as-is.
In modern AMD systems, the PSP brings up DRAM then uncompresses the
BIOS image into memory prior to x86 beginning execution. The PSP
supports a zlib engine, and interprets the first 256 bytes as a
header, where offset 0x14 containing the uncompressed size. For
further details, see AMD Platform Security Processor BIOS Architecture
Design Guide for AMD Family 17h Processors (NDA only, #55758).
BUG=b:127766506
TEST=Use with WIP Picasso
Change-Id: Id1c54e0a6dae9e4a0362c6635fe8b8aa48a369d8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
To use fixed PCI bus numbers is always invalid.
Change-Id: Ia2ffdb1f5e0ff398674a016ad4cb94f622c057ff
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
It was never tested or injected.
Change-Id: I3fd82aaa11afc5adab212ec6709580b4bcc67ca3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34001
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only (conditionally) used part was dump_pci_device()
and that was never particularly useful either.
Change-Id: Iaacfa511de1ce1e0bdbd2e8a74e41d336e505670
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This also corrects some CPU naming in comments.
Change-Id: I8b9fc3ba0d6dc6e0001b40518aae2d26c1184dc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34000
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
garg 2A2C DB: SKU ID - 1
garg HDMI DB: SKU ID - 9
garg LTE DB: SKU ID - 17
For HDMI SKU9, GPIO needs to be overriden to enable
DDI1 DDC SDA/SCL.
BUG=b:134912735
BRANCH=octopus
TEST=emerge-octopus coreboot chromeos-bootimage
Change-Id: I6ad8e5aa52f503121b10fe353e4bf4021aee2061
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Enable EMR Pen Stylus function for Grob360S
BUG=b:135968368
BRANCH=octopus
TEST=EMR function working normally with HW reworked Fleex.
Change-Id: Ia220dc0d3051b79b110b4df66df108f701776478
Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33802
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Google project name is Bloog.
Bloog is 12-inch LCD.
Blooguard is 14-inch LCD so would prefer to use a different SAR values instead.
Use sku-id to load the SAR values.
BUG=b:135078377
BRANCH=octopus
TEST=build and verify SAR load by sku-id
Change-Id: Id80df28a961eb1f62714558df2b219aa552ecb97
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
When we added CONFIG_VBOOT_MIGRATE_WORKING_DATA, the idea was that on
some Arm platforms the original working data buffer was in SRAM, which
stays accessbile for the whole runtime of the system. There is no reason
to migrate it into CBMEM on those platforms because ramstage and the
payload could continue to access it in SRAM.
Now that we've had a couple of months of experience with this option, we
found that most of our Arm platforms have some issue that requires
migrating anyway, because BL31 often claims SRAM for itself and makes it
inaccessible to the payload. On the remaining platforms, accessing SRAM
from the payload is possible but still an issue, because libpayload
doesn't have enough memory layout information to set up proper page
tables for it, so we're accessing it uncached and at risk of alignment
errors.
Rather than having to figure out how to map the right SRAM range for
every platform in the payload, let's just get rid of the option.
memcpy()ing 12KB isn't worth this much hassle.
Change-Id: I1b94e01c998f723c8950be4d12cc8f02b363a1bf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Use literals KHz & MHz for kilohertz and megahertz frequency usages
in macro definition.
Change-Id: If1ca6e5e7b0603f93f3c980cc85af470fdcd54ba
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I57c0bcfbe0d96aac106f771e8efb3bd471302c25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33965
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The flag is useful for updaters to determine which areas to leave
alone, such as VPD (vital product data) regions that are set in
factory and might contain unique (MAC addresses) or hard to obtain
(calibration output) data.
It's also useful to see which regions are marked as such.
Change-Id: Ic0a229d474b32ac156cfabc917714ce9d339bac6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
MMIO_BUS_RANGE_SHIFT is a numerical value and not a bit field.
Change it to simply 2. Otherwise its usage winds up evaluating
to BusRange << (1 << 1).
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I2a6ecfc9fbfd45f69194b8daef43ff84a1dfd5fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Increase the timeout for USB requests to 5 seconds for all USB host
controllers.
Prior to this fix, the xCHI driver was detecting false timeouts during
SET ADDRESS requests when nested downstream hubs were connected to the
xHCI root hub.
BUG=b:124730179
BRANCH=sarien
TEST=Build libpayload and depthcharge on sarien/arcada.
TEST=Without change replicate USB set address timeouts in depthcharge
when dock and 4K monitor connected (which includes a total of 4 USB
hubs). With timeout fix, depthcharge boots OS with no USB errors and
the same USB topology. Note that this tests xHCI operation only.
Change-Id: I53e3e67d893420e7c9e8b52c47dd0edb979e5468
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Also don't define the default as this results in spurious lines in the
.config.
The only difference in the generated config.h is that for most board
ARCH_RISCV_M goes from 1 to 0. This should not matter.
Change-Id: I3e8c1cc5696d621e243696a3b5e34f62ab69a688
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31311
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I877e19c014759e33b9cc48ff9ee27e898737aece
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: If50d9218119d5446d0ce98b8a9297b23bae65c72
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33816
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enhance elog wake source information with more details about which USB port
resulted in a wake from S3 or S0ix.
BUG=b:123429132
BRANCH=none
TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference
libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch
coreboot chromeos-bootimage``
Ensure /build/hatch/firmware/image-hatch.serial.bin has been built.
Plug a keyboard into a USB port on the DUT.
Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via
servo).
On the console, run ``powerd_dbus_suspend``.
Wait for the DUT to enter low power mode.
Verify low power mode by issuing the ``powerinfo`` command on the EC
console (via servo). Expect to see ``power state 4 = S0ix``.
Press a key on the USB keyboard.
The DUT wakes up.
On the console, run ``mosys eventlog list`` and look for the wake source.
156 | 2019-06-26 09:46:07 | S0ix Enter
157 | 2019-06-26 12:14:05 | S0ix Exit
158 | 2019-06-26 12:14:05 | Wake Source | Internal PME | 0
159 | 2019-06-26 12:14:05 | Wake Source | GPE # | 109
Program image-hatch.serial.bin into the DUT using flashrom.
Repeat the ``powerd_dbus_suspend``, ``powerinfo``, ``mosys eventlog list``
sequence.
12 | 2019-06-26 14:52:23 | S0ix Enter
13 | 2019-06-26 14:53:07 | S0ix Exit
14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3
15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109
Change-Id: Ie9ef870e219733dea9806c766f5351db25689b32
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ia8482dc9b6ad800826152c2d3e9813190b0b574e
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These functions are only used in cbmem, so they can be made static.
Change-Id: I21f7d7c21064a8ae951e6d96b28c2ddcf52c0006
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This enables extra useful warnings.
Change-Id: I4afbbb0fefb32a7d954aafd87df17075b0abe6f7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Make sure that the type of the loop index matches the type of the upper
bound. This fixes several -Wsign-compare warnings.
Change-Id: Iaa94ce93bc35d523bc782ad914bfd283606becac
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update fsp submodule pointer to Coffee Lake FSP 7.0.64.40
github commit:
https://github.com/IntelFsp/FSP/commit/59964173e18950debcc6b8856c5c928935ce0b4f
Change-Id: I864404a03be63aa60e81db21af16d69cda2d4e12
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33642
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`cpuid_eax()` returns an unsigned integer.
Change-Id: Iebb6501130bc9ae333d45ae9d2e10c918245a6d1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It's not perfect and we'll need to find a better place for that,
but I'll look into that as part of the big board-status rework.
Change-Id: I2ae50c58e3796563e0b2370105abc82b7e2e042a
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I73cd50da7b2f1aaf1ab05daad4997c5e48172f25
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Previously, We had to use GPP_A21 for trackpad wake and GPP_D21 for
trackpad interrupts due to ITSS not honoring the INVERT config. Now
that's fixed, we can configure trackpad wake and interrupts on GPP_A21
only.
BUG=b:130436471
BRANCH=None
TEST=1. boot a hatch device and make sure we can move the cursor with the trackpad
2. Run powerd_dbus_suspend and wake by clicking on the trackpad and ensure
through "mosys eventlog list" that the wake source is the trackpad.\
3. Run "echo mem > /sys/power/state", wait until device goes into S3,
click trackpad to ensure device wakes.
Change-Id: I26a99206c42ba442f91ae577b98366fc2fd6c0ca
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Now that ITSS config is fixed, we can set the IOAPIC pad configs
correctly.
BUG=b:123967687
BRANCH=None
TEST=Make sure Hatch is booting and tested out trackpad to make
sure can move cursor and wake by clicking on the trackpad
after running powerd_dbus_suspend.
Change-Id: I0b125996338b6f16e03b7ca184f6337c696a5f64
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33819
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7031b07ae105a14be3c5d4e52ecc1364956fd845
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33750
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove all Picasso bootblock support. CAR is not a supportable
feature, and the first code executed at the reset vector will be
a hybrid romstage. Details for this implementation may be found
in Documentation/soc/amd/picasso/family17h.md.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I8edf45c02dc5bfcdca03abf1294db4be508682cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Update paths. There are still a few paths in Kconfig relating to PSP
and the firmware directory table. Those will be updated in a follow-on
commit.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I18f3d80dbeabd754ebcee6593864fd613fc2ef7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32412
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the Makefile is updated, we can change the name back without
it affecting the Stoney build.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I18ee48865fb64265f38179560265827783d50820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Ie466bc39ed6aa9d2a8651bd9290090b83cd97d74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32410
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I32b7dbeae7538884311ccfc3a0e8db63c48fe356
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Remove files that aren't needed for the picasso port.
Remove traces of AGESA v5 (includes binaryPI support files). Remove
SPD helper.
Picasso (and all AMD Family 17h processors) have a very different
boot flow from previous products. Memory is initialized by the PSP
before the x86 processor is released from reset. The SPD is read by
the PSP, so it's not needed in coreboot.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I743ffd6058982f8f182ea4d73172a029967f3ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
So that everyone can see what's being updated from stoney, we're
starting with a direct copy of the stoney directory. There are
arguments both for and against doing it this way, but I believe
This the most transparent way. We've moved much of the duplicated
stoney code into the soc/amd/common directory and will continue
that work as it becomes obvious that we have unchanged code between
the SOCs.
Makefile.inc has been renamed as makefile.inc so that it won't
build in jenkins until the directory is updated.
Other than that change, this is an exact copy of the stoneyridge
SOC directory which will be updated in the follow-on commits in
the patch train.
TEST=None
BUG=b:130804851
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I6809bd1eea304f76dd9000c079b3ed09f94dbd3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32407
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Samsung K4F6E3S4HM-MGCJ density is 16Gb
BUG=b:121228792
BRANCH=master
TEST=emerge-snappy coreboot chromeos-bootimage
MemTotal: 8041964kB in /proc/meminfo
Change-Id: Ie8ecd82b92d4e82d3955cf773febca30f6280a5e
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
For the PCI_VENDOR_ID_ATI case, we can rely on
pci_rom_acpi_fill_vfct() to make the call if necessary.
For hardware other than ATI, pci_rom_probe() was already
called from pci_rom_ssdt() and pci_dev_init(), so
PCI_ROM_ADDRESS BAR is already enabled, if requested so.
Change-Id: I0ea893a9ac7ba480840ebf5570d8fe0d9e20938f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
The function pci_rom_probe() may be called multiple times
for a device. For cases where CBFS does not contain optionrom
file, only the first time probing for the on-board ROM
chip worked.
PCI_ROM_ADDRESS_ENABLE is set on the first run. Mask out all
the reserved bits of PCI_ROM_ADDRESS register to get correct
physical address for rom_header.
Change-Id: I14374954af09201494bf2f13e5a6e4dc640c05ee
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
|
|
* Add architecture independend way of clearing all DRAM
* Implemented in ramstage as MTRRs need to be set to speed up
clearing. Takes up to 15 seconds per GiB otherwise.
* Use memset_pae on x86
* Add quirks for FSP1.0
Tested on P8H61M-Pro:
* Clears 4GiB in less than 1 second
Tested on wedge100s:
* Clears 8GiB in 2 seconds
Change-Id: Idaadb8fb438e5b95557c0f65a14534e8762fde20
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31550
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To clear all DRAM on x86_32, add a new method that uses PAE to access
more than 32bit of address space.
Add Documentation as well.
Required for clearing all system memory as part of security API.
Tested on wedge100s:
Takes less than 2 seconds to clear 8GiB of DRAM.
Tested on P8H61M-Pro:
Takes less than 1 second to clear 4GiB of DRAM.
Change-Id: I00f7ecf87b5c9227a9d58a0b61eecc38007e1a57
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31549
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I28c2beca4bc26ddb896e68886571ebdc82276b48
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I5b5b7bc61dd82fb1b866857d60926b057fae3715
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33445
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Banner string format has been changed (CB:30935). We should update our
regular expression correspondingly.
Also add "verstage" into the stage search list since some boards (e.g.,
Kukui) might start console initialization at verstage.
Change-Id: I16eba3ac5e203e80b0bfd42a4294401dbccd4463
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Idc31144024f785a42cbad78bf2c965d08dcc5178
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These functions are only used in ifdtool, so they can be made static.
Change-Id: Ia48bfecb89a7445dbd0f140acb5ac0592da2ebe7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Fix error "Invalid option -A" by adding "A" to options list.
Also, atoi does not parse hex string, for instance 0x200 is interpreted as 0,
and this causes a failure when updating second FIT table using -j option.
Use strtol instead of atoi
BUG=none
BRANCH=none
TEST=Build and boot hatch after enabling dual bootblock feature.
Change-Id: Ib227437f88ffcccda1ce2f20a9ab098e5aa091c7
Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Since ttyS0 isn't used for UART0, configure ttyS4 as default
Change-Id: Ia0469226253b08328807d5401c05633296e43d22
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33785
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of maintaining this in 3rdparty/blobs use the
3rdparty/intel-microcode which is maintained by Intel.
This allows for some finegrained control where family+model span
multiple targets.
Microcode updates present in
3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those
contain updates not present in the Intel repo. Those are presumably
early CPU samples that did not end up in products.
The following MCU are get a new revision:
old:
sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552
sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528
sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288
sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312
sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728
sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384
sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336
sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304
sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304
sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280
sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304
sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432
sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328
sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304
sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328
new:
sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552
sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504
sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288
sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336
sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728
sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408
sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360
sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304
sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328
sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456
sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352
sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352
Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
No message is reported in tlcl_lib_init() when tis_init() or tis_open()
returned an error value.
Add debug string.
BUG=N/A
TEST=Build binary and verified logging on Facebook FBG-1701
Change-Id: I522e488ddd3a1bd94a1a8c8470c757bd79c6d5c5
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com>
Change-Id: Ic193f31b9776683849578bf9009c51bf22d1dae6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Prior to commit
d731a24 src/cpu/intel: Set get_ia32_fsb function common
value of 200 was silently used as a default for fsp_rangeley
(model_406dx) in cpu/x86/lapic/apic_timer:set_timer_fsb().
After the commit, get_ia32_fsb() returns -2, eventually
resulting with divide-by-zero in timer_monotonic_get(), as
get_timer_fsb() returns 0.
Add Rangeley CPUID model 0x4d to get_ia32_fsb() as a fix,
using BCLK = 100 MHz based on the comments in
northbridge/intel/fsp_rangeley/udelay.c
Change-Id: I306f85dba9b1e91539fc0ecc9b2ae9d54f82be6c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This patch makes CONFIG_RAMPAYLOAD default enable upon selection
of HAVE_RAMPAYLOAD kconfig from mainboard for x86 platform.
Without this CL, CONFIG_RAMPAYLOAD is still disabled although
mainboard has selected CONFIG_HAVE_RAMPAYLOAD.
Change-Id: I40308bbf970a0dbe5f7e2086ed8a7a70c2a3a32c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33859
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4ac67d1577229e63424dd7fd0ff84d1acfe826c3
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
calculate_color() uses the 'fbinfo' global that is initialized by
cbgfx_init(), so we need to run the latter before we can run the former
or we get a null pointer access.
Change-Id: I73ca8e20ca36f64d699379d504fd41dc2084f157
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
It looks like in days gone by that these switches were once parts of
loops that incremented 'index' as they went along. However, we don't
have any loops anymore, so remove the needless increments and streamline
the rest of the assignments.
Change-Id: Iaabee984333c273af7810f9c11ed26bbb2a995d1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Add documentation comment
- Use 'unsigned int' to make checkpatch happy
- Return early if no more links need to be added
- Add error handling if malloc fails
- Clean up whitespace
Change-Id: I70976ee2539b058721d0ae3c15edf279253cd9b7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229634
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33238
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function is duplicated in many AMD northbridge files, and all
the definitions have started to diverge somewhat. This moves a single
copy into device utils and deletes the rest. The function definition
from nb/amd/amdfam10 was chosen to be kept, since it contains several
fixes from commit 59d609217b (AMD fam10: Fix add_more_links) that
the others don't have.
For the ease of diffing, the checkpatch lints and other small cleanups
will be done in a follow-up patch.
Change-Id: I5ea73126092449db3f18e19ac0660439313072de
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33237
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All the clocks are switched on anyway, so this series of if statements
isn't needed.
Change-Id: I654043fd6736caa6890fd697015c577ddaa7cd41
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 13473{27-30}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
By default printram() expands to nothing in normal builds, and so
scan-build thinks that the assignment to reg8 is unused. Inline the
value of reg8 into the print statement to silence the warning.
Change-Id: I921fe08949c4135367bee9646b3b365097fab19e
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Pstate_num is initialized later when it is used as a loop index, so this
duplicate assignment can be removed.
Change-Id: I71429bd3306139a823ed39e751d779e4d874f657
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We return immediately after, so this assignment can be removed.
Change-Id: I2a317ada0132a40b623402055b3b995bde80ddf5
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I33bf45c81cc4be157ea71806900a545ee68ecee8
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ie922832bc7641a44a53c0cda8d808579c66420b5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
FSP sets the use of the 8254 timer via the Enable8254ClockGating
UPD, which defaults to enabled, overriding what is set by coreboot.
Per the FSP integration guide, this UPD needs to be disabled when
a legacy OS is booted (ie, when SeaBIOS is used as the payload).
Add a Kconfig option to set the UPD properly based on payload
selection, and remove the existing coreboot code in lpc.c since
it is either ineffective or being overridden by FSP.
Test: build/boot out-of-tree WHL board with both SeaBIOS and
Tianocore, ensure 8254 timer usage set correctly for each.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I0e888bf754cb72093f14fc02f39bddcd6d288203
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
