summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-10soc/intel/meteorlake: Use common gpio.h includeDinesh Gehlot
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes with the common gpio.h which will include soc/gpio.h which will include intelblocks/gpio.h which will include soc/gpio_defs.h BUG=b:261778357 TEST=Able to build and boot Google/rex. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I58e428cde5e13f4f0dfe528d798c0613b7f8a94a Reviewed-on: https://review.coreboot.org/c/coreboot/+/71630 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-01-10soc/mediatek/common: Reset the watchdog timer before triggering resetRunyang Chen
When the watchdog timer reaches 0, the timer value won't reset to the default value unless there is an external reset or a kick. It will result in the watchdog failing to trigger the reset signal. We kick the watchdog to reset the timer to the default value. Also, because WDT hardware needs about 94us to synchronize the registers, add a 100us delay before triggering the reset signal. BUG=b:264003005, b:264017048 BRANCH=corsola TEST= Reboot successfully with the following cmd stop daisydog sleep 60 > /dev/watchdog& Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Signed-off-by: Kuan-Hsun Cheng <allen-kh.cheng@mediatek.com> Change-Id: Ic4964103d54910c4a1e675b59c362e93c2213b19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71754 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10chromeos/cr50_enable_update.c: Clear EC AP_IDLE flagDerek Huang
When AP boots up after Cr50 firmware update and reboot, AP finds that Cr50 reset is required for Cr50 to pick the new firmware so it trigger Cr50 reset and power off the system, AP expects system will power on automatically after Cr50 reset. However this is not the case for Chromebox, Chromebox EC set AP_IDLE flag when system is shutting down, when AP_IDLE flag is set in EC, the system stays at S5/G3 and wait for power button presssend. It cause an issue in factory that the operator needs to press power button to power on the DUT after Cr50 firmware update. This patch sends EC command to direct EC to clear AP_IDLE flag after AP shutdown so AP can boot up when Cr50 reset. BUG=b:261119366 BRANCH=firmware-brya-14505.B TEST=DUT boots up after Cr50 firmware update in factory test flow Change-Id: If97ffbe65f4783f17f4747a87b0bf89a2b021a3b Signed-off-by: Derek Huang <derekhuang@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70773 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10util/liveiso: Update from 22.05 to 22.11Felix Singer
Update and also adjust configs so that they work with NixOS 22.11. Change-Id: Ia0fed68f5449ccf56b25660f5cdbc8c239064748 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-01-10mb/google/brya: Allow respective variant to choose NEM configSubrata Banik
This patch introduces a new config named `DEFAULT_ADL_NEM` and allows respective brya variants with Alder Lake ESx samples to choose NEM over eNEM as eNEM was fuse disabled till ESx. TEST=The boot flow related to eNEM and NEM behaviour remains the same with and without this patch. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibbd492a3d210739120c7ad16415cb7912f5b70ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/71743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-10mb/google/brya/var/marasov: Disable touch panel power for non-touch skuFrank Chu
Disable touch panel power for non-touch sku by fw_config TOUCH field. BUG=b:263452842 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I4736f94481512806377b733b26fdc7290046c555 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71691 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kyle Lin <kylelinck@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-10mb/siemens/mc_ehl1: Limit SATA speed to Gen 2Werner Zeh
Due to mainboard restrictions a SATA link at Gen 3 (6 Gbps) can cause issues as the margin is not big enough. Limit SATA speed to Gen 2 to achieve a more robust SATA connection. Change-Id: Ia79998db5f959528a4e8e29e570a7f55283adee1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71230 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-01-10soc/intel/elkhartlake: Make SATA speed limit configurableWerner Zeh
In cases where there are limitations on the mainboard it can be necessary to limit the used SATA speed even though both, the SATA controller and disk drive support a higher speed rate. The FSP parameter 'SataSpeedLimit' allows to set the speed limit. This patch provides a chip config so that this FSP parameter can be set as needed in the devicetree on mainboard level. Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-01-09treewide: Remove unused <cpu/amd/msr.h>Elyes Haouas
Change-Id: Id24a7c7db24f49672df9d5ceefec5b7596f23e09 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-09mb/google/dedede: Use runtime detection for touchscreensMatt DeVillier
Now that power sequencing has been implemented, switch from using ACPI "probed" flag to "detect" flag for all i2c touchscreens. This removes non-present devices from the SSDT and relieves the OS of the burden of probing. BUG=b:121309055 TEST=build/boot Windows/linux on multiple dedede variants, verify all touchscreens functional in OS, dump ACPI and verify only i2c devices actually present on the board have entries in the SSDT. Change-Id: I91e03bd1d96a6b2f0c3813665910133db0d6c308 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09mb/google/dedede: Set touchscreen IRQs to LEVEL vs EDGEMatt DeVillier
The GPIOs themselves are configured as level triggered, and the drivers (both Linux and Windows) work better with LEVEL vs EDGE triggering. TEST=tested with rest of patch train Change-Id: I212533ffdfb05f841e722c130b52c2976272e670 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09mb/google/dedede: Implement touchscreen power sequencingMatt DeVillier
For touchscreens on dedede variants, drive the enable GPIO high starting in romstage, then disable the reset GPIO in ramstage. This will allow coreboot to detect the presence of i2c touchscreens during ACPI SSDT generation (implemented in a subsequent commit). Since the fast majority of dedede variants have a touchscreen option, and those that do use the same GPIOs for enable/reset, set the GPIOs for touchscreen operation in the baseboard and then override for the few (3) variants that do not have a touchscreen. BUG=b:121309055 TEST=tested with rest of patch train Change-Id: Ib95e23545cc3e8589ddbd9e18cd0533bec9333e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09mb/google/dedede: Add method to set GPIOs in romstageMatt DeVillier
Add method variant_romstage_gpio_table() with empty weak implementation to allow variants to override as needed for touchscreen power sequencing (to be implemented in a subsequent commit). Call method in romstage to program any GPIOs the variant may need to set. TEST=tested with rest of patch train Change-Id: Ic216827a4b53d1d35913efca63a43d4672791c54 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09soc/amd: Remove dummy SOC_SPECIFIC_OPTIONSElyes Haouas
Change-Id: I080b7b579338c3cf342beabda54f43f525d8b65c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-09soc/amd/morgana: Double max number of cpus for morganaRitul Guru
Change-Id: I5169a900345e2aabefcf1e2c249ee4bce6dc8fc5 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-09soc/amd/morgana: update morgana cpuidRitul Guru
Change-Id: Ieaad72a6b964f4b2ab572733694def88e30888a3 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-09soc/amd/mendocino/Kconfig: Remove TODO after reviewFred Reitberger
Remove TODO comments after reviewing against mendocino ppr #57243, rev 3.00 BUG=263563246 TEST=build skyrim Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ie56d481dd8b6b4e0a1e3d50f4ce75f50231fe4dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/71719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-09soc/amd/common/block/graphics: Fix whitespace consistencyFred Reitberger
Replace spaces with tabs for consistency. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I65b9bec7443094dfd2f6b0d6b11e0100023873b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-09soc/intel/xeon_sp/skx: Remove nested check for ACPI supportMarc Jones
Remove redundant nested check for ACPI support. Change-Id: Ie4b40382d304028135bcdd7851e2f48333570421 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-01-09configs: Build x201 for 64bitArthur Heymans
This now also tests a lot of debug code on 64bit. Change-Id: Iea3d5b8926fd8300c9daba0bc6dac91b9e55cdd6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-09sb/intel/common/spi: Fix building for 64bitArthur Heymans
This avoids the warning of casting pointers to integers of different size. Change-Id: I7bcb6dbf286438115c854d618eaa2da21c81400d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69389 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-09mb/google/brya: Increase Resizable BAR address space limit to 33 bitsTarun Tuli
The dGPU used for some Brya projects requests 33 bits of address space for one of its BARs via the Resizable BAR mechanism (requires 6GB). This Kconfig is currently set at 32 bits for brya, so the allocation currently is capped at 32 bits (4GB). This patch sets the limit to 33 bits for brya boards, which is enough for the GPU. BUG=b:214443809 TEST=all of the dGPU PCI BARs on agah can be successfully allocated Change-Id: Ia791be5108fb07a256ae62fc2aee2f057909ef12 Signed-off-by: Tarun Tuli <tarun@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-09mb/google/brya/var/lisbon: Update RTL8168 LAN LED configRobert Chen
Adjust LAN LED config to 0x060f. BUG=b:246657849 TEST=emerge-brask coreboot Change-Id: Idd5ed2bf7eb4ee5990f2a842cba43f967ae3825e Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71698 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com>
2023-01-09mb/google/brya/var/gladios: Update RTL8168 LAN LED configRobert Chen
Adjust LAN LED config to 0x060f. BUG=b:239513596 TEST=emerge-brask coreboot Change-Id: I17b844b89569fb7653454fd08782fc961c715817 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71697 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com>
2023-01-09MAINTAINERS: Add maintainers for the cross toolchainFelix Singer
Add the following people as maintainers for the cross toolchain. * Martin Roth * Felix Singer * Elyes Haouas Change-Id: I3fad10baa0f0177693e009a4bbc218c6064611b9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-09soc/intel/common: Fix cpu index calculationSridhar Siricilla
get_cpu_index() helper function returns cpu's index based on it's APIC id position from the ascending order list of cpus' APIC IDs. In order to calculate the cpu's index, the helper function needs to traverse through each cpu node to find their APIC IDs. So, the function traverse the CPU node list from the cpu whose APIC ID is 0 assuming it is the first cpu node in the list. This logic works fine where BSP's APIC ID is 0. But, starting from MTL, APIC ID for BSP need not be 0 as APIC ID numbering first get assigned for CPU Die Efficient cores, then Performance cores. Please refer section# 6.1 of doc#643504 for more details on APIC IDs. Considering the APIC Id allotment for MTL cores, as existing code traversing begins from the cpu that has APIC Id#0 which may not be the first cpu node in the list so index calculation results in wrong value. The patch addresses above described issue by traversing all the CPU nodes to calculate the cpu index. Also, prevents inconsistent report of /sys/devices/system/cpu/cpu*/cpufreq/* and /sys/devices/system/cpu/cpuXX/acpi_cppc on each reboot. TEST=Verified that the get_cpu_index helper function returns the correct index id for a CPU on Rex. The coreboot log with code instrumentation, before this patch: [DEBUG] my_apic_id:0x10 cpu_index: 0x6 [DEBUG] my_apic_id:0x11 cpu_index: 0x6 [DEBUG] my_apic_id:0x42 cpu_index: 0x6 [DEBUG] my_apic_id:0x21 cpu_index: 0x6 [DEBUG] my_apic_id:0x40 cpu_index: 0x6 [DEBUG] my_apic_id:0x31 cpu_index: 0x6 [DEBUG] my_apic_id:0x39 cpu_index: 0x6 [DEBUG] my_apic_id:0xa cpu_index: 0x3 [DEBUG] my_apic_id:0x0 cpu_index: 0x0 [DEBUG] my_apic_id:0x8 cpu_index: 0x2 [DEBUG] my_apic_id:0x4 cpu_index: 0x2 [DEBUG] my_apic_id:0x28 cpu_index: 0x6 [DEBUG] my_apic_id:0x2 cpu_index: 0x1 [DEBUG] my_apic_id:0x38 cpu_index: 0x6 [DEBUG] my_apic_id:0x29 cpu_index: 0x6 [DEBUG] my_apic_id:0xe cpu_index: 0x5 [DEBUG] my_apic_id:0x6 cpu_index: 0x2 [DEBUG] my_apic_id:0x20 cpu_index: 0x6 [DEBUG] my_apic_id:0x30 cpu_index: 0x6 [DEBUG] my_apic_id:0x19 cpu_index: 0x6 [DEBUG] my_apic_id:0xc cpu_index: 0x4 [DEBUG] my_apic_id:0x18 cpu_index: 0x6 We can see same cpu_index for multiple cores before fix. After this patch.. [DEBUG] my_apic_id:0x10 cpu_index: 0x8 [DEBUG] my_apic_id:019 cpu_index: 0xb [DEBUG] my_apic_id:0x11 cpu_index: 0x9 [DEBUG] my_apic_id:0x18 cpu_index: 0xa [DEBUG] my_apic_id:0x40 cpu_index: 0x14 [DEBUG] my_apic_id:0x30 cpu_index: 0x10 [DEBUG] my_apic_id:0x42 cpu_index: 0x15 [DEBUG] my_apic_id:0xc cpu_index: 0x6 [DEBUG] my_apic_id:0x2 cpu_index: 0x1 [DEBUG] my_apic_id:0x29 cpu_index: 0xf [DEBUG] my_apic_id:0xe cpu_index: 0x7 [DEBUG] my_apic_id:0x20 cpu_index: 0xc [DEBUG] my_apic_id:0x0 cpu_index: 0x0 [DEBUG] my_apic_id:0x31 cpu_index: 0x11 [DEBUG] my_apic_id:0x28 cpu_index: 0xe [DEBUG] my_apic_id:0x21 cpu_index: 0xd [DEBUG] my_apic_id:0xa cpu_index: 0x5 [DEBUG] my_apic_id:0x38 cpu_index: 0x12 [DEBUG] my_apic_id:0x8 cpu_index: 0x4 [DEBUG] my_apic_id:0x4 cpu_index: 0x2 [DEBUG] my_apic_id:0x39 cpu_index: 0x13 Change-Id: I69e5e6231dd18b43d439340aaed50eb9edeca3b7 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70751 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-09soc/intel/alderlake: Disable Intel TXT based on `INTEL_TXT` configSubrata Banik
This patch makes the call into TXT lib in order to disable the TXT if SoC user haven't selected the `INTEL_TXT` config. Disabling TXT would be helpful to access VGA framebuffer prior calling into FSP-M. TEST=Able to perform disable_txt and unlock memory which helped to access VGA framebuffer prior calling into FSP-M. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I9dd7c5492a5f45eef0dd9e836cc2da1844c78919 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71575 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-09security/intel/txt: Add helper function to disable TXTSubrata Banik
Add a function to disable TXT as per TXT BIOS spec Section 6.2.5. AP firmware can disable TXT if TXT fails or TPM is already enabled. On platforms with TXT disabled, the memory can be unlocked using MSR 0x2e6. TEST=Able to perform disable_txt on SoC SKUs with TXT enabled. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I27f613428e82a1dd924172eab853d2ce9c32b473 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-09Docs/releases: Update board support doc for 4.17 & 4.18 branchesMartin Roth
Add the list of boards removed after the 4.18 release and update other text. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Id90a84eb9a417836a7d3fdd9b6f2f3ae34c95fc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09Docs/releases: Update 4.17 & 4.18 notes to remove RESOURCE_ALLOCATOR_V3Martin Roth
This removal was announced in 4.16, but didn't make it into the 4.17 or 4.18 release notes. Those platforms have now been removed. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I35607a86242c37e1578874b3a79ff0387a55b146 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-01-09mb/google/skyrim/var/markarth: Enable DPTC supportJohn Su
Enable DPTC support for markarth. BUG=b:263216451 TEST=emerge-skyrim coreboot Change-Id: I18c2c840037f65f4f2ca92054247cece28843e45 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71720 Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-09mb/google/nissa/var/xivu: Update DPTF parametersIan Feng
Follow thermal table from thermal team. 1. Enable TS3 thermal sensor. 2. Set TS3 passive policy to 63. 3. Set TS3 critical policy to 73. 4. Modify TSR2 passive policy to CPU. BUG=b:263554342 TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: Ia1fcaee15a8b58b755ce0a48a1978e795b66efd7 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71658 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-09mb/google/brya/var/gladios: Add ACPI DmaProperty for RTL8168 ethernetRobert Chen
Add ACPI DmaProperty for gladios. BUG=b:239513596 TEST=Verified SSDT on gladios unit. Before: Scope (\_SB.PCI0.RP01) { Device (RLTK) { Name (_HID, "R8168") // _HID: Hardware ID Name (_UID, 0xD0E889DD) // _UID: Unique ID Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name Name (_ADR, 0x00000000) // _ADR: Address Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x07, 0x03 }) } } After: Scope (\_SB.PCI0.RP01) { Device (RLTK) { Name (_HID, "R8168") // _HID: Hardware ID Name (_UID, 0xD0E889DD) // _UID: Unique ID Name (_DDN, "Realtek r8168") // _DDN: DOS Device Name Name (_ADR, 0x00000000) // _ADR: Address Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x07, 0x03 }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"), Package (0x01) { Package (0x02) { "DmaProperty", One } } }) } } Change-Id: I1c4f6ff7b3eda114f4f365a963c089fe584d8aee Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71699 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-08soc/intel/common: Untie PRMRR from SGXPratikkumar Prajapati
PRMRR is used by many Intel SOC features, not just Intel SGX. As of now SGX and Key Locker are the features that need PRMRR. Untie it from Intel SGX specific files and move to common cpulib. Also rename PRMRR size config option. Use the renamed PRMRR size config option to set the PRMRR size. TEST=Able to set PRMRR size using config. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I0cd49a87be0293530705802fd9b830201a5863c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/70819 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-01-08security/intel/txt: Create Intel TXT lib with helper functionsSubrata Banik
This patch decouples useful TXT related operations from the romstage.c file alone and moves them into a helper txtlib.c. This effort will be helpful for SoC users to perform TXT related operations (like Disabling TXT) even without selecting INTEL_TXT config. At present, those helper functions are only available upon selecting INTEL_TXT which is not getting enabled for most of the SoC platform in the scope of the Chromebooks. TEST=Able to access functions from txtlib.c even without selecting INTEL_TXT config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iff5b4e705e18cbaf181b4c71bfed368c3ed047ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/71573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-01-08include/memory_info.h: Add soc_num to dimm_info structTim Chu
Sometimes, server platforms may have more than one socket on server board. However, there's no field to store information about which socket the DIMM comes from in dimm_info structure. This patch adds soc_num field in dimm_info structure to store socket ID of the DIMM. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I1b9e2b87fda2d7c32ecb8ce9d989795c8b869cea Reviewed-on: https://review.coreboot.org/c/coreboot/+/70662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2023-01-08soc/intel/xeon_sp: select SCO_INTEL_COMMON_BLOCK_TCOJohnny Lin
Also disable TCO timer through calling tco_configure(). If tco_configure() is not called, the TCO timeout would trigger SMI periodically about every 2 seconds with SMM log: "TCO_STS: BIT18 TIMEOUT" Tested=On AC CRB, does not see periodic SMI log. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I2d307ad16109ae11862dd5e5acc0f12f47b22582 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2023-01-08soc/intel/xeon_sp: Improve final MTRR solutionJonathan Zhang
If cbmem_top is not 1M aligned there will be a hole between DPR base and cbmem_top that the allocator will consider as unassigned memory. Resources could incorrectly be assigned to that region and the final MTRR solution will also try to skip that hole, therefore using a lot more variable MTRRs than needed. TESTED on Archer City 2S system: Uses 1 variable MTRR in the final setup instead of 7. Change-Id: I198f8d83bcfcdca3a770bd7f9a7060d5782a49fe Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com> Signed-off-by: Jonathan Zhang <jonzhang@meta.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2023-01-08arch/x86/smbios: Replace SMBIOS type4 processor upgrade fieldsLi, Jincheng
values by macros Macro definitions are from DMTF System Management BIOS (SMBIOS) Reference Specification (DSP0134) Chapter 7.5.5. Change-Id: Ifed1d773b0b349f878648b8172fd770a397e9686 Signed-off-by: Li, Jincheng <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-08soc/intel/alderlake/acpi: Add Kconfig options for SCM and FCMSean Rhodes
Software Connection Manager doesn't work with Linux 5.13 or later, resulting in TBT ports timing out. Not advertising this results in Firmware Connection Manager being used and TBT works correctly. Add Kconfig options to chose between SCM (Software Connection Manager) and FCM (Firmware Connection Manager). FCM is primary, as it's more compatible save for ChromeOS devices as ChromeOS uses SCM. Linux patch: torvalds/linux@c6da62a c6da62a219d028de10f2e22e93a34c7ee2b88d03 Tested with StarBook Mk VI (i7-1260P). Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iac31d37c0873f41f7b14e1051fe214466d1ebdd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-08soc/intel/meteorlake: Add support to configure package c-state demotionKapil Porwal
This patch adds the support to enable/disable package c-state demotion feature from the devicetree based on mainboard requirement. Port of commit 4be8d9e80deb ("soc/intel/adl: Add support to configure package c-state demotion") BUG=none TEST=Boot to the OS on Google/Rex. Snippet from FSP log: [SPEW ] PkgCState Demotion : 0x1 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I0a4b0b181349ce41035524482add4336cf83a68b Reviewed-on: https://review.coreboot.org/c/coreboot/+/71654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-08soc/intel/meteorlake: Set max Pkg C-states to AutoKapil Porwal
This patch configures max Pkg C-state to Auto which limits the max C-state to deep C-state. Port of commit af42906efa72 ("soc/intel/alderlake: Set max Pkg C-states to Auto") BUG=none TEST=Boot to the OS on Google/Rex. Snippet from FSP log: [SPEW ] PkgCStateLimit : 0xFF Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ic403ab83a594b04920d5cf600432939687a2598b Reviewed-on: https://review.coreboot.org/c/coreboot/+/71653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-08drivers/amd: Update to use defined post codesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I2d5700534c07e89b3908a2e6b827db919a48795d Reviewed-on: https://review.coreboot.org/c/coreboot/+/71591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-01-08mb/google/skyrim: Switch from LZMA to LZ4 compression for ramstageMartin Roth
Because skyrim is loading ramstage from SPI with the DMA engine, the size of the compressed image is less important to load speed than decompression time. Because the LZ4 decompression is so much faster than LZMA, compressing with LZ4 saves us roughly 30ms in boot time. For size, we're spending roughly 57KiB: fallback/ramstage 0x9b00 stage 130864 LZMA (305316 decompressed) fallback/ramstage 0x9b00 stage 189126 LZ4 (305316 decompressed) Right now we have 2MiB empty space in Skyrim's RO before this change, and roughly 550KiB empty space in RW, so there aren't currently any size worries. Just for fun, I also tested uncompressed ramstage, and it was still 18ms faster than LZMA, but that makes it roughly 12ms slower than LZ4. BUG=b:264409477 TEST=Boot skyrim, look at boot speed. Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Change-Id: Iedde6fc2db9d702c0ff2b0081e7baa254ac6699f Reviewed-on: https://review.coreboot.org/c/coreboot/+/71675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-01-08src/lib: Include LZMA in romstage for FSP-MMartin Roth
Previously, LZMA was included in romstage because it was almost always needed to decompress ramstage. When compressing ramstage with LZ4, but using LZMA compression for FSP-M, we still need the LZMA decompression to be present, so update when the Makefile includes the LZMA decoder. Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Change-Id: Id52d25a13420f05db8b2b563de0448f9d44638e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-01-08Kconfig: Add option to compress ramstage with LZ4Martin Roth
When ramstage is loaded asynchronously, as on the skyrim boards, the faster decompression of LZ4 allows for faster boot times than the tighter compression of LZMA. To make this change, the name of the existing ramstage_compression option needs to be updated. BUG=b:264409477 TEST=Boot skyrim, look at boot speed Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Change-Id: I27dd1a8def024e0efd466cef9ffd9ca71717486a Reviewed-on: https://review.coreboot.org/c/coreboot/+/71673 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-08mb/google/dedede: Create dibbi variantLiam Flaherty
Create the dibbi variant of the waddledee reference board by copying the template files to a new directory. BUG=b:260934018 BRANCH=dedede TEST=util/abuild/abuild -p none -t google/dedede -x -a includes GOOGLE_DIBBI Change-Id: I3b8d4e7f8a53323f56567cbbc03bab7f8804f286 Signed-off-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71709 Reviewed-by: Adam Mills <adamjmills@google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-08mb/google/skyrim/var/markarth: Update RAM ID tableJohn Su
Add new ram_id:0000 for Micron MT62F1G32D2DS-026 WT:B. Add new ram_id:0010 for Micron MT62F512M32D2DR-031 WT:B The RAM ID table has been assigned as: DRAM Part Name ID to assign K3KL8L80CM-MGCT 0 (0000) H58G56BK7BX068 0 (0000) MT62F1G32D2DS-026 WT:B 0 (0000) K3KL9L90CM-MGCT 1 (0001) H58G66BK7BX067 1 (0001) MT62F2G32D4DS-026 WT:B 1 (0001) MT62F512M32D2DR-031 WT:B 2 (0010) BUG=b:263296326, b:263216451 BRANCH=None TEST=FW_NAME=markarth emerge-skyrim coreboot Change-Id: I3a0d3edb813ef91bfdc68f7400be64fb679dfc04 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-01-08mb/google/nissa: Enable eNEMReka Norman
Enable eNEM for all nissa variants. This is mostly done to be consistent with other recent Intel platforms. It's not strictly necessary since on nissa the LLC size is larger than the total code + data size used in CAR. There is no change in boot time. BUG=None TEST=Boot to OS on craask Change-Id: Iad48976e405403ab61c71d8f72e0616ea8b85ebd Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-08mb/google/nissa/var/craask: remove SAR UNUSED fw_configEric Lai
This bit is dropped in factory. All skus can use table ID_0. BUG=b:251287101 TEST=build passed. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I4298376899f881dd2265aef5a0bbc5bcc46728a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71690 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-08mb/google/brya/var/kano: Set the ov2740 to 0 and the hi556 to 1 for SSFCDavid Wu
When EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG is enabled and SSFC is not set, it will treat missing SSFC as zero, so Kano needs to set the ov2740 to 0 to avoid probing wrong mipi camera. Before patch >fw_config match found: UFC=UFC_MIPI_OVTI2740 >fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S >fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S >fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S >fw_config match found: UFC=UFC_MIPI_OVTI2740 >fw_config match found: ZYDRON_UFC=UFC_MIPI_HI556 >fw_config match found: UFC=UFC_MIPI_OVTI2740 >fw_config match found: STYLUS=STYLUS_PRESENT After patch >fw_config match found: UFC=UFC_MIPI_OVTI2740 >fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S >fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S >fw_config match found: AUDIO=MAX98373_NAU88L25B_I2S >fw_config match found: UFC=UFC_MIPI_OVTI2740 >I2C: 00:20 disabled by fw_config >fw_config match found: UFC=UFC_MIPI_OVTI2740 >fw_config match found: STYLUS=STYLUS_PRESENT BUG=b:262939431 TEST=Boot on kano and check functional with ov2740 camera. Change-Id: I46fac6c820d6006956680a07198db82225630905 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-07drivers/pc80/vga: Add legacy VGA romstage supportJeremy Compostella
This is support for adding legacy VGA support into romstage. Support for this is being provided by libgfxinit. The current use case allows us to initialize the display before memory init (prior to physical memory init) to inform the user when lengthy memory training is needed. BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=VGA code compiles for romstage Change-Id: I81309871e8db71657b2a9816708141f121d767d3 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70278 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-07mb/google/rex: Disable stage cacheSubrata Banik
This patch disables the stage cache to save boot time. Note: S3 is not POR for Intel MTL mobile skus. Boot time is reduced by ~8ms. Boot time before: 4:end of romstage 1,391,225 (13,724) 100:start of postcar 1,403,339 (12,114) Boot time after: 4:end of romstage 1,380,262 (5,618) 100:start of postcar 1,392,323 (12,060) Change-Id: I9775fc628f345a514894f30435a374e2ffa057c1 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-01-07mb/amd: Update pademelon to eval boardMartin Roth
While pademelon may be a desktop board, it's not available for purchase, which means it should be presented here as an eval board. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5038935bb6f2ba530ea6e16ac84c1746efec8e48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-07mb/starlabs: Remove the bios_version functionSean Rhodes
Remove smbios_mainboard_bios_version so that the default CONFIG_LOCALVERSION can be used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia94f8683a54a98f4e3b1f51521db7e3ccb56ba48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/70855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2023-01-07vc/google: Add and use POST_CODE_CLEAR definitionMartin Roth
The CR50 code clears the post code value. Add this as a #define. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: If3b73a3159ac8ac9ab08c6ff705b0ca289ab453c Reviewed-on: https://review.coreboot.org/c/coreboot/+/71592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-06soc/intel/: Rename small and big cores referencesSridhar Siricilla
The patch addresses Intel heterogeneous cores as `Efficient` and `Performance` cores instead of `small` and `big` cores. It is to ensure coreboot code has uniform reference to the heterogeneous cores. So, the patch renames all `small` and `big` core references to `efficient` (eff) and `performance` (perf) cores respectively. TEST=Build the code for Brya and Rex boards Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I98c9c0ed86b211d736a0a1738b47410faa13a39f Reviewed-on: https://review.coreboot.org/c/coreboot/+/71639 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-01-06soc/intel/common: Check PRMRR dependent featuresPratikkumar Prajapati
Add below mentioned functions: is_sgx_configured_and_supported(): Checks if SGX is configured and supported is_keylocker_configured_and_supported(): Checks if Key Locker is configured and supported check_prm_features_enabled(): Checks if any of the features that need PRM are configured and supported. As of now SGX and Key Locker are the only features that need PRM. Also, call check_prm_features_enabled() from get_valid_prmrr_size() to make sure PRM dependent features are enabled and configured before returning PRMRR size. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I51d3c144c410ce4c736f10e3759c7b7603ec3de9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-01-06soc/intel/common: Add Kconfig option for Intel Key LockerPratikkumar Prajapati
Add INTEL_KEYLOCKER Kconfig option. Disable it by default. The specification of Key Locker can be found via document #343965 on Intel's site. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: Ia78e9bfe7ba2fd4e45b4821c95b19b8e580dccab Reviewed-on: https://review.coreboot.org/c/coreboot/+/71118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-01-06mb/amd/mandolin/Makefile.inc: Remove path to non-existent directoryElyes Haouas
Fix: cc1: error: src/mainboard/amd/mandolin/acpi: No such file or directory [-Werror=missing-include-dirs] Change-Id: Ifbe6fda12088ddf51b6a177116aa542dbacc7672 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-06mb/amd/bilby/Makefile.inc: Remove path to non-existent directoryElyes Haouas
Fix: cc1: error: src/mainboard/amd/bilby/acpi: No such file or directory [-Werror=missing-include-dirs] Change-Id: Ie167cd362b55e38870d26a877d8181b2b07b8639 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-06soc/intel/meteorlake: Enable support for common IRQ blockKapil Porwal
Since GPIO IO-APIC IRQs are fixed in hardware (RO registers), this patch allows MTL boards to dynamically assign PCI IRQs. This means not relying on FSP defaults, which eliminates the problem of PCI IRQs interfering with GPIO IRQs routed to the same IRQ, when both have selected IO-APIC routing. BUG=none TEST=Build and boot to google/rex. Check dmesg and make sure that there is no regression. IO-APIC interrupts before: 1: IO-APIC 1-edge i8042 8: IO-APIC 8-edge rtc0 9: IO-APIC 9-fasteoi acpi 14: IO-APIC 14-fasteoi INTC1083:00 16: IO-APIC 16-fasteoi idma64.5, ttyS0, intel-ipu6 28: IO-APIC 28-fasteoi idma64.6, pxa2xx-spi.6 29: IO-APIC 29-fasteoi i2c_designware.3 30: IO-APIC 30-fasteoi i2c_designware.4 32: IO-APIC 32-fasteoi idma64.0, i2c_designware.0 33: IO-APIC 33-fasteoi idma64.1, i2c_designware.1 35: IO-APIC 35-fasteoi idma64.2, i2c_designware.2 88: IO-APIC 88-fasteoi ELAN0000:00 89: IO-APIC 89-fasteoi chromeos-ec 99: IO-APIC 99-edge cr50_i2c 106: IO-APIC 106-fasteoi chromeos-ec IO-APIC interrupts after: 1: IO-APIC 1-edge i8042 8: IO-APIC 8-edge rtc0 9: IO-APIC 9-fasteoi acpi 14: IO-APIC 14-fasteoi INTC1083:00 16: IO-APIC 16-fasteoi intel-ipu6 20: IO-APIC 20-fasteoi idma64.5, ttyS0 27: IO-APIC 27-fasteoi idma64.0, i2c_designware.0 28: IO-APIC 28-fasteoi idma64.1, i2c_designware.1 30: IO-APIC 30-fasteoi idma64.2, i2c_designware.2 31: IO-APIC 31-fasteoi i2c_designware.3 32: IO-APIC 32-fasteoi i2c_designware.4 35: IO-APIC 35-fasteoi idma64.6, pxa2xx-spi.6 88: IO-APIC 88-fasteoi ELAN0000:00 89: IO-APIC 89-fasteoi chromeos-ec 99: IO-APIC 99-edge cr50_i2c 106: IO-APIC 106-fasteoi chromeos-ec _PRT before: Package (0x04) ==> 0x001FFFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x001FFFFF, One, Zero, 0x11 Package (0x04) ==> 0x001FFFFF, 0x02, Zero, 0x12 Package (0x04) ==> 0x001FFFFF, 0x03, Zero, 0x13 Package (0x04) ==> 0x001EFFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x001EFFFF, One, Zero, 0x11 Package (0x04) ==> 0x001EFFFF, 0x02, Zero, 0x1B Package (0x04) ==> 0x001EFFFF, 0x03, Zero, 0x1C Package (0x04) ==> 0x001CFFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x001CFFFF, One, Zero, 0x11 Package (0x04) ==> 0x001CFFFF, 0x02, Zero, 0x12 Package (0x04) ==> 0x001CFFFF, 0x03, Zero, 0x13 Package (0x04) ==> 0x0019FFFF, Zero, Zero, 0x1D Package (0x04) ==> 0x0019FFFF, One, Zero, 0x1E Package (0x04) ==> 0x0019FFFF, 0x02, Zero, 0x1F Package (0x04) ==> 0x0017FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0016FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0016FFFF, One, Zero, 0x11 Package (0x04) ==> 0x0016FFFF, 0x02, Zero, 0x12 Package (0x04) ==> 0x0016FFFF, 0x03, Zero, 0x13 Package (0x04) ==> 0x0015FFFF, Zero, Zero, 0x20 Package (0x04) ==> 0x0015FFFF, One, Zero, 0x21 Package (0x04) ==> 0x0015FFFF, 0x02, Zero, 0x22 Package (0x04) ==> 0x0015FFFF, 0x03, Zero, 0x23 Package (0x04) ==> 0x0014FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0014FFFF, One, Zero, 0x11 Package (0x04) ==> 0x0014FFFF, 0x02, Zero, 0x12 Package (0x04) ==> 0x0012FFFF, Zero, Zero, 0x1A Package (0x04) ==> 0x0012FFFF, One, Zero, 0x25 Package (0x04) ==> 0x0012FFFF, 0x02, Zero, 0x19 Package (0x04) ==> 0x0010FFFF, Zero, Zero, 0x17 Package (0x04) ==> 0x0010FFFF, One, Zero, 0x16 Package (0x04) ==> 0x000DFFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x000DFFFF, One, Zero, 0x11 Package (0x04) ==> 0x000BFFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0008FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0007FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0007FFFF, One, Zero, 0x11 Package (0x04) ==> 0x0007FFFF, 0x02, Zero, 0x12 Package (0x04) ==> 0x0007FFFF, 0x03, Zero, 0x13 Package (0x04) ==> 0x0006FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0006FFFF, One, Zero, 0x11 Package (0x04) ==> 0x0006FFFF, 0x02, Zero, 0x12 Package (0x04) ==> 0x0006FFFF, 0x03, Zero, 0x13 Package (0x04) ==> 0x0005FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0004FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0002FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0001FFFF, Zero, Zero, 0x10 Package (0x04) ==> 0x0001FFFF, One, Zero, 0x11 Package (0x04) ==> 0x0001FFFF, 0x02, Zero, 0x12 Package (0x04) ==> 0x0001FFFF, 0x03, Zero, 0x13 _PRT after: Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011 Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012 Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x0006FFFF, 0x01, 0x00, 0x00000011 Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012 Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013 Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014 Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015 Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016 Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017 Package (0x04) ==> 0x000BFFFF, 0x00, 0x00, 0x00000013 Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000014 Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000015 Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000016 Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000017 Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x00000018 Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x00000019 Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000011 Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000012 Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x0000001A Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000013 Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x0000001B Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x0000001C Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x0000001D Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x0000001E Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000014 Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000015 Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000016 Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000017 Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x0000001F Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x00000020 Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x00000021 Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011 Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012 Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013 Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000014 Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000015 Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x00000022 Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x00000023 Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000017 Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000014 Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000015 Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000016 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I013cd5faab6f425ab1af91fe2a36ac3b8aeef443 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-06mb/google/brya/var/omnigul: use i2c1 for TPMjamie_chen
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the omnigul variant. BUG=b:263060849 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I42528d73a4f83bd409cb4a1bd51f2e4e82ee7804 Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-01-06mb/google/brya/var/omnigul: use RPL FSP headersjamie_chen
To support an RPL SKU on omnigul, omnigul must use the FSP for RPL. Select SOC_INTEL_RAPTORLAKE for omnigul so that it will use the RPL FSP headers for omnigul. BUG=b:263060849 BRANCH=None TEST=FW_NAME=omnigul emerge-brya intel-rplfsp coreboot-private-files-baseboard-brya coreboot chromeos-bootimage Change-Id: If3cfbaeff0472012cb8f30ed8fff3bf5cac23f85 Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com> Change-Id: I6a0afb04bea4940e13ea62c2cd0a09500b8b5335 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71702 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-06mb/google/nissa/var/craask: Modify GPIOs for NVMeRen Kuo
Modify NVMe clkreq pin to GPP_D7 from GPP_D6.The design change is for commonality of GPIO settings. To reserve craask GPIO table and add craaskneto/craaskino's NVMe GPIO setting. In the change, clkreq# will be 2 and clksrc is still 1. BUG=b:259211172 TEST=Verify on reworked craask DUT to boot up from NVMe. Change-Id: If45c1a87144d5370b1ca2525295fb7947639362f Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71170 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-06mb/google/nissa: Disable stage cacheReka Norman
Although S3 is supported on nissa, only S0ix is used on user devices, so we can ignore optimising the S3 resume time. Disable the stage cache to save boot time at the cost on increasing the S3 resume time. Boot time is reduced by ~6 ms. This is mostly from adding postcar to the stage cache, which is slow since TSEG is not cached in romstage. Adding ramstage and FSP-S take negligible time. The S3 resume time is increased by ~89 ms total from loading and decompressing ramstage and FSP-S. Boot time before: 3:after RAM initialization 573,295 (931) 4:end of romstage 583,569 (10,274) 100:start of postcar 587,729 (4,160) Boot time after: 3:after RAM initialization 571,527 (830) 4:end of romstage 575,712 (4,185) 100:start of postcar 579,866 (4,153) S3 resume time before: 101:end of postcar 368,904 (0) 10:start of ramstage 369,165 (260) 971:loading FSP-S 385,742 (16,577) 30:device enumeration 407,105 (21,362) S3 resume time after: 101:end of postcar 363,101 (0) 8:starting to load ramstage 363,101 (0) 15:starting LZMA decompress (ignore for x86) 382,802 (19,701) 16:finished LZMA decompress (ignore for x86) 431,620 (48,817) 9:finished loading ramstage 431,850 (230) 10:start of ramstage 431,927 (76) 971:loading FSP-S 448,357 (16,430) 17:starting LZ4 decompress (ignore for x86) 474,420 (26,062) 18:finished LZ4 decompress (ignore for x86) 474,627 (206) BUG=b:247940538, b:192032803 TEST=Boot and S3 suspend/resume on craask Change-Id: I8015dc0808ee19cac67c2a6573d52781c6120e8c Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71677 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-01-06Kconfig: Allow mainboards to disable stage cacheReka Norman
On recent Intel ChromeOS devices, although S3 is still supported, only S0ix is used on user devices, so we don't care about optimising S3 resume time. Disabing the stage cache saves boot time at the cost of increasing the S3 resume time. E.g. on nissa this reduces boot time by 6 ms and increases S3 resume time by 89 ms. BUG=b:247940538, b:192032803 TEST=Build and boot on nissa with MAINBOARD_DISABLE_STAGE_CACHE selected. Change-Id: I243a401a112a12bb824c5447a8fecc99500f7739 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-06soc/intel/common: Use CPUID_STRUCT_EXTENDED_FEATURE_FLAGS macroPratikkumar Prajapati
Use CPUID_STRUCT_EXTENDED_FEATURE_FLAGS macro to get extended CPU capabilities flags using cpuid_ext inline function. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: If680ffff64e2e1dabded8c03c4042d349a11b635 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71646 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-05mb/google/skyrim/var/markarth: Update GPIO settingsJohn Su
Configure GPIOs based on b/263534907#comment4 from EE. BUG=b:263534907, b:263216451 BRANCH=None TEST=FW_NAME=markarth emerge-skyrim coreboot Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I5346a4322a6538d69d3482948166cfb5bd182021 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71635 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-05Update vboot submodule to upstream mainElyes Haouas
Updating from commit id 196b0843e9 : to a09b792e6a : Makefile: Remove old include directories This brings in 9 new commits. Fix: cc1: error: firmware/lib/cryptolib/include: No such file or directory [-Werror=missing-include-dirs] cc1: error: firmware/lib20/include: No such file or directory [-Werror=missing-include-dirs] Change-Id: I292d3a4046c1a1890a640747cbbd00e79e5e56b4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71582 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-05mb/google/skyrim/var/winterhold: set dxio_tx_vboost_enable for whiterunChris.Wang
Turn on the dxio_tx_vboost_enable for winterhold/whiterun in coreboot. It needs to confirm the PCIe Signal Integrity after enabled. BUG=b:259622787 BRANCH=none TEST=confirm the setting has been set correspondingly with checking the FSP log. Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I6aad3d9118180d2ffdfba38abc80b175b6f103bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/71647 Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-01-05mb/google/brya/var/marasov: Disable FPMCU interfaceFrank Chu
Set fingerprint control GPIO to NC by HW design. BUG=b:264340020 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I304862f0dd201da100b89c79a473eb116fc8263e Reviewed-on: https://review.coreboot.org/c/coreboot/+/71650 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-01-05mb/system76/tgl-u: Add FSP-S configs per variantTim Crawford
Configure CPU PCIe RP and IOM per variant. Change-Id: I9c38af42206497dbb9436e9f2b8aff46fa4d3fb9 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-01-05nb/intel/haswell: Specify supported memory typeElyes Haouas
Change-Id: I885cc00c8bfcfaaabb2ce2b0269172d8d7a88db5 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-01-05mb/google/brya: Create omnigul variantjamie_chen
Create the omnigul variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:263060849 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_OMNIGUL Change-Id: I6b4123db9cb77dc050a81f1cb83ef10e2fbffe8d Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-04Revert "mb/google/brya: Define a more suitable MRC training text message"Jakub Czapiga
This reverts commit e45f70423e5da8509bae83aba84b08f8fc0f624e. Reason for revert: Merged out of order, broke tree Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I38a7be6b94199d3a23e78114fb6708c535f241cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/71279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-01-04Revert "mb/google/brya: Add romstage early graphics for brya"Jakub Czapiga
This reverts commit 96d9b756690839c17b307a93b8a1898bd1c02ff5. Reason for revert: Merged out of order, broke tree Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: Iac2d78f2d6c687f52dc720e8d8dcb5cf7a171c9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/71280 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-04mb/google/brya: Define a more suitable MRC training text messageJeremy Compostella
This message is designed to reduce end-user confusion who may not know what memory training is. It also provides a maximum time estimation calibrated for brya devices. BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=New message observed on skolas Change-Id: Ie71cd86746427789b3694d41224bf2c170af0f91 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70796 Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-04mb/google/brya: Add romstage early graphics for bryaJeremy Compostella
BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=On-screen text message seen during MRC training on skolas with a few extra patches Change-Id: I41c9cccb09dea52e2318f8f9ebeeda3697a7b513 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-01-04soc/intel: Create common function to check PCH slotKapil Porwal
BUG=none TEST=Build and boot to google/taniks. Check dmesg and make sure that there is no regression. Also confirm that there is no change in ACPI _PRT and IO-APCI interrupt assignment. IO-APIC interrupts before and after this patch: 1: IO-APIC 1-edge i8042 8: IO-APIC 8-edge rtc0 9: IO-APIC 9-fasteoi acpi 14: IO-APIC 14-fasteoi INTC1055:00 23: IO-APIC 23-fasteoi idma64.5, ttyS0 37: IO-APIC 37-fasteoi idma64.0, i2c_designware.0 38: IO-APIC 38-fasteoi idma64.1, i2c_designware.1 40: IO-APIC 40-fasteoi idma64.2, i2c_designware.2 41: IO-APIC 41-fasteoi idma64.3, i2c_designware.3 42: IO-APIC 42-fasteoi idma64.4, i2c_designware.4 45: IO-APIC 45-fasteoi idma64.6, pxa2xx-spi.6 77: IO-APIC 77-edge cr50_i2c 100: IO-APIC 100-fasteoi ELAN0000:00 103: IO-APIC 103-fasteoi chromeos-ec _PRT before and after this patch: Package (0x04) ==> 0x0001FFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x0002FFFF, 0x00, 0x00, 0x00000011 Package (0x04) ==> 0x0004FFFF, 0x00, 0x00, 0x00000012 Package (0x04) ==> 0x0005FFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x0006FFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x0006FFFF, 0x02, 0x00, 0x00000012 Package (0x04) ==> 0x0007FFFF, 0x00, 0x00, 0x00000013 Package (0x04) ==> 0x0007FFFF, 0x01, 0x00, 0x00000014 Package (0x04) ==> 0x0007FFFF, 0x02, 0x00, 0x00000015 Package (0x04) ==> 0x0007FFFF, 0x03, 0x00, 0x00000016 Package (0x04) ==> 0x0008FFFF, 0x00, 0x00, 0x00000017 Package (0x04) ==> 0x000DFFFF, 0x00, 0x00, 0x00000011 Package (0x04) ==> 0x000DFFFF, 0x01, 0x00, 0x00000013 Package (0x04) ==> 0x0010FFFF, 0x00, 0x00, 0x00000018 Package (0x04) ==> 0x0010FFFF, 0x01, 0x00, 0x00000019 Package (0x04) ==> 0x0010FFFF, 0x02, 0x00, 0x00000014 Package (0x04) ==> 0x0010FFFF, 0x03, 0x00, 0x00000015 Package (0x04) ==> 0x0011FFFF, 0x00, 0x00, 0x0000001A Package (0x04) ==> 0x0011FFFF, 0x01, 0x00, 0x0000001B Package (0x04) ==> 0x0011FFFF, 0x02, 0x00, 0x0000001C Package (0x04) ==> 0x0011FFFF, 0x03, 0x00, 0x0000001D Package (0x04) ==> 0x0012FFFF, 0x00, 0x00, 0x0000001E Package (0x04) ==> 0x0012FFFF, 0x01, 0x00, 0x0000001F Package (0x04) ==> 0x0012FFFF, 0x02, 0x00, 0x00000016 Package (0x04) ==> 0x0013FFFF, 0x00, 0x00, 0x00000020 Package (0x04) ==> 0x0013FFFF, 0x01, 0x00, 0x00000021 Package (0x04) ==> 0x0013FFFF, 0x02, 0x00, 0x00000022 Package (0x04) ==> 0x0013FFFF, 0x03, 0x00, 0x00000023 Package (0x04) ==> 0x0014FFFF, 0x01, 0x00, 0x00000017 Package (0x04) ==> 0x0014FFFF, 0x00, 0x00, 0x00000024 Package (0x04) ==> 0x0014FFFF, 0x02, 0x00, 0x00000011 Package (0x04) ==> 0x0015FFFF, 0x00, 0x00, 0x00000025 Package (0x04) ==> 0x0015FFFF, 0x01, 0x00, 0x00000026 Package (0x04) ==> 0x0015FFFF, 0x02, 0x00, 0x00000027 Package (0x04) ==> 0x0015FFFF, 0x03, 0x00, 0x00000028 Package (0x04) ==> 0x0016FFFF, 0x00, 0x00, 0x00000012 Package (0x04) ==> 0x0016FFFF, 0x01, 0x00, 0x00000013 Package (0x04) ==> 0x0016FFFF, 0x02, 0x00, 0x00000014 Package (0x04) ==> 0x0016FFFF, 0x03, 0x00, 0x00000015 Package (0x04) ==> 0x0017FFFF, 0x00, 0x00, 0x00000016 Package (0x04) ==> 0x0019FFFF, 0x00, 0x00, 0x00000029 Package (0x04) ==> 0x0019FFFF, 0x01, 0x00, 0x0000002A Package (0x04) ==> 0x0019FFFF, 0x02, 0x00, 0x0000002B Package (0x04) ==> 0x001CFFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x001CFFFF, 0x01, 0x00, 0x00000011 Package (0x04) ==> 0x001CFFFF, 0x02, 0x00, 0x00000012 Package (0x04) ==> 0x001CFFFF, 0x03, 0x00, 0x00000013 Package (0x04) ==> 0x001DFFFF, 0x00, 0x00, 0x00000010 Package (0x04) ==> 0x001DFFFF, 0x01, 0x00, 0x00000011 Package (0x04) ==> 0x001DFFFF, 0x02, 0x00, 0x00000012 Package (0x04) ==> 0x001DFFFF, 0x03, 0x00, 0x00000013 Package (0x04) ==> 0x001EFFFF, 0x00, 0x00, 0x00000017 Package (0x04) ==> 0x001EFFFF, 0x01, 0x00, 0x00000014 Package (0x04) ==> 0x001EFFFF, 0x02, 0x00, 0x0000002C Package (0x04) ==> 0x001EFFFF, 0x03, 0x00, 0x0000002D Package (0x04) ==> 0x001FFFFF, 0x01, 0x00, 0x00000016 Package (0x04) ==> 0x001FFFFF, 0x02, 0x00, 0x00000017 Package (0x04) ==> 0x001FFFFF, 0x03, 0x00, 0x00000014 Package (0x04) ==> 0x001FFFFF, 0x00, 0x00, 0x00000015 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ib4fc850228b7ddbf84e2feb2433adff5e4002033 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71236 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-04spd.h: Move enum ddr3_module_type to ddr3.hElyes Haouas
Move specific enum ddr3_module_type to <device/dram/ddr3.h>. Change-Id: I8fd7892dda26158a5bdd6cd4972c7859a252153e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71547 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-04mb/intel/mtlrvp: Enable CSE Lite SKU for MTL-RVPHarsha B R
This patch will enable Kconfig SOC_INTEL_CSE_LITE_SKU option required to enable CSE-Lite SKU for MTL-RVP. On enabling the respective Kconfig option, CSE reboots the system into CSE_RW FW region on cold reboot. BUG=b:224325352 TEST=Able to boot intel/mtlrvp to ChromeOS and also able to observe CSE boot to RW FW region as part of coreboot console log, localhost ~ # cbmem -c | grep cse [DEBUG] cse_lite: Number of partitions = 3 [DEBUG] cse_lite: Current partition = RW [DEBUG] cse_lite: Next partition = RW Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I325405cc304d245871396317c11ac7a5b062a5bd Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71638 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-04nb/intel/*/Kconfig: Remove dummy NORTHBRIDGE_SPECIFIC_OPTIONSElyes Haouas
Change-Id: Icecef272bd4cd2a204c903783787bbec751fe9e5 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-01-04spd.h: Move enum ddr2_module_type to ddr2.hElyes Haouas
Move specific enum ddr2_module_type to <device/dram/ddr2.h>. Change-Id: I748658f9b349bff9b1ebe2c0a6acf71bf2a221ce Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71546 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-01-04nb/intel/ironlake: Specify supported memory typeElyes Haouas
Change-Id: Ib1bf132f248d1f3c42d32f884f09687964a0c6f2 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-01-04payloads: Update GRUB2 stable version from 2.04 to 2.06Paul Menzel
GRUB2 was released on June 8th, 2021 [1]. [1]: https://lists.gnu.org/archive/html/grub-devel/2021-06/msg00022.html Change-Id: I050a78c769c3cd4c9ae627c7e3124a4894a018d7 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-01-04soc/amd/mendocino: Hook up UPD dxio_tx_vboost_enable for PCIe optimizationChris.Wang
Add the UPD dxio_tx_vboost_enable for PCIe optimization. It will impact the PCIe signal integrity, need to double-confirm the SI result after enabling this setting. BUG=b:259622787 BRANCH=none TEST=confirm the setting has been set correspondingly with checking the FSP log. Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I05ae5b3091219e0cb1fe469c929fad6a725db678 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71562 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-04mb/google/skyrim/var/markarth: Generate RAM IDs for new memory partsJohn Su
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: DRAM Part Name ID to assign K3KL8L80CM-MGCT 0 (0000) H58G56BK7BX068 0 (0000) K3KL9L90CM-MGCT 1 (0001) H58G66BK7BX067 1 (0001) MT62F2G32D4DS-026 WT:B 1 (0001) BUG=b:263296326, b:263216451 BRANCH=None TEST=FW_NAME=markarth emerge-skyrim coreboot Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I4f00d444bd59443ecba29c6c155d676bab7a3d82 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chao Gui <chaogui@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-04mb/google/skyrim: Create markarth variantChao Gui
Create the markarth variant of the skyrim reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:262092858 BRANCH=None TEST=util/abuild/abuild -p none -t google/skyrim -x -a make sure the build includes GOOGLE_MARKARTH Change-Id: Ifbace841ca56d8659aaffdc31fb2bc4367d96f82 Signed-off-by: Chao Gui <chaogui@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-01-04mb/google/nissa/var/yaviks: Disable external fivrWisley Chen
In next phase, yaviks will remove external fivr. Use the board version to config external fivr for backward compatibility and show message. BUG=b:263842258 TEST=build, boot to OS, suspend/resume work normally. Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: Id85570046c5b8e9d90a112793c1ec8604e6bf533 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-01-04mb/google/rex: Configure EN_DMIC_SOC_DATA to GPO and LOWSubrata Banik
This patch configures GPP_H15 (EN_DMIC_SOC_DATA) as GPO and put into safe state aka LOW/PD. BUG=b:263411621 TEST=Able to build and boot Google, Rex to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3d376f895b2f0882c9fa6fe7b98686907bde4321 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71631 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-04soc/intel/common/block/fast_spi: Hook up pci_dev_ops_pci to set SSIDKapil Porwal
BUG=none TEST=Verify presence of subsystem ID for fast_spi device on google/rex. lspci output before this patch: 00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:7e23] lspci output after this patch: 00:1f.5 Serial bus controller [0c80]: Intel Corporation Device [8086:7e23] Subsystem: Intel Corporation Device [8086:7e23] Note: UPD SiSkipSsidProgramming was set to 1 for above test. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I08c7a5a3fdc7389b315e85180c16d1ec335fbba2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-04soc/intel/common: Add API to check Key Locker supportPratikkumar Prajapati
Add is_keylocker_supported() API in common cpulib. This function checks if the CPU supports Key Locker feature. Returns true if Key Locker feature is supported otherwise false. Change-Id: Ide9e59a4f11a63df48838eab02c2c584cced12e1 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71117 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-04mb/google/brya/var/gaelin: Use RPL FSP headersMike Shih
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers for FSP. Since we use RPL FSP and it will support ADL as well, we rename "Gaelin4ADL" to "Gaelin". BUG=b:258603624 BRANCH=firmware-brya-14505.B TEST=emerge-brask coreboot Cq-Depend: chrome-internal:5227091, chromium:4113361 Change-Id: Ie7349f3670aeec166228e7df55300cd30d0ca16c Signed-off-by: Mike Shih <mikeshih@msi.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-03mb/google/brya/var/lisbon: Update audio codec i2c timingKevin Chiu
Adjust audio codec i2c timing to 399 kHz. BUG=b:263050944 TEST=FW_NAME=lisbon emerge-brask coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: I8495a88f2034e5e4ccf28ff53c81e0d6561e2e0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/70898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-03mb/google/skyrim/var/winterhold: Enable RTD3 support for eMMC as NVMeChris.Wang
winterhold/whiterun has different H/W topology to skyrim that the eMMC device is on a different GPP: skyrim: GPP1 -> SD winterhold : GPP1 -> eMMC BUG=b:263763288 BRANCH=none TEST=s0i3 stress over 2500 cycles. Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ie6af4287057c6befa0b787ac28d7898166401b29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-01-03vc/amd/pi/00670F00/Makefile.inc: Remove path to non-existent directoryElyes Haouas
Fix: CC romstage/mainboard/amd/pademelon/static.o cc1: error: src/vendorcode/amd/pi/00670F00/Lib: No such file or directory [-Werror=missing-include-dirs] CC romstage/mainboard/amd/gardenia/static.o cc1: error: src/vendorcode/amd/pi/00670F00/Lib: No such file or directory [-Werror=missing-include-dirs] CC romstage/mainboard/google/kahlee/static.o cc1: error: src/vendorcode/amd/pi/00670F00/Lib: No such file or directory [-Werror=missing-include-dirs] CC romstage/mainboard/google/kahlee/static.o cc1: error: src/vendorcode/amd/pi/00670F00/Lib: No such file or directory [-Werror=missing-include-dirs] Change-Id: I038f87f564ed0415035d92bf0d79a9f8ae2227a4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-03soc/amd/cezanne/psp_verstage/Makefile.inc: Remove path to non-existent ↵Elyes Haouas
directories Found using 'Wmissing-include-dirs' command option. Fix: cc1: error: ../../src/soc/amd/cezanne/psp_verstage/include: No such file or directory [-Werror=missing-include-dirs] Change-Id: I36022a031cc08d2af8b982522b3d6652e679bf14 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-01-03soc/amd/picasso/psp_verstage/Makefile.inc: Remove path to non-existent ↵Elyes Haouas
directories Found using 'Wmissing-include-dirs' command option. Fix: cc1: error: ../../src/soc/amd/picasso/psp_verstage/include: No such file or directory [-Werror=missing-include-dirs] Change-Id: I7713eef54686c58a83215c461c3274cec89e32b0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-01-03soc/amd/mendocino/psp_verstage/Makefile.inc: Remove path to non-existent ↵Elyes Haouas
directory Found using 'Wmissing-include-dirs' command option. Fix: cc1: error: ../../src/soc/amd/mendocino/psp_verstage/include: No such file or directory [-Werror=missing-include-dirs] Change-Id: I1cc084abc7a9bfed760350f304dd074081a7eebf Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>