summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-19nb/intel/nehalem/gma: Drop stale pre-pocessor guardsNico Huber
These were forgotten when updating the caller and resulted in build failures for every but the NGI path. Change-Id: I2490a3b4dca6c248eb37f43aa676ae619afdbfc7 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-19mb/google/poppy: Configure WWAN gpiosFurquan Shaikh
BUG=b:70773281 Change-Id: If9b575568cabcbee03ad190b69d9c033890f7fa6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22927 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-19mb/google/poppy: Configure GPP_B0 for WLAN wakeFurquan Shaikh
As per the latest schematics, this change configures GPP_B0 for WLAN wake and uses corresponding gpe bit in ACPI node for WLAN. This hasn't been tested yet. BUG=b:70775494 Change-Id: I5198b8083a87d00f890b45986e5e3f62b81686c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22928 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-19mb/google/poppy: Configure pen reset and eject linesFurquan Shaikh
This change configures the GPIOs for pen reset and eject lines and exports required properties using ACPI table. BUG=b:70773138 Change-Id: I52f6c3dced54259cde8ee6753275622622e15954 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy/variants/nautilus: Enable AER and LTR for root port 1Furquan Shaikh
Similar to other KBL projects, this change enables AER and LTR for root port 1 on poppy. BUG=b:65570878 Change-Id: Iadad3d2fc46cbba575a776071305925c529a6760 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy: Configure GPP_B8 for WLAN_PE_RSTFurquan Shaikh
BUG=b:62726961 Change-Id: I5a88e67d5a22f8a39427c95821ffee4f2fd717fa Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy/variants/nami: Fix SATA configs againFurquan Shaikh
This change really fixes the SataMode to select non-RAID mode and enables SATA which was incorrectly disabled in a71276b (mb/google/poppy/variants/nami: Fix SataMode configuration in devicetree). BUG=b:70160119 Change-Id: Ied6adabdc1d2458972bde628616a198cd41f9f3e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy: Configure GPP_F3 as NCFurquan Shaikh
GPP_F3 is not connected on poppy or any of its variants. This change configures GPP_F3 as NC on poppy and all the variants. BUG=b:70160119 Change-Id: I303276ab9546d56c846755fa3a6142978f6b8c92 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/poppy/variants/nami: Fix GPIO configuration for DEVSLPFurquan Shaikh
Nami uses DEVSLP1 and not DEVSLP0. This change updates the GPIO configuration for DEVSLP to match the latest version of schematics. BUG=b:70160119 Change-Id: Ifa181322011a4b8947ecd0fa44dcf790b0d8f657 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-19mb/google/fizz: Enable 2nd NIC ledsDavid Wu
This patch enables customized NIC leds as below: Green Orange (Amber) 100M off blinking 1000M on blinking BUG=b:69950854 TEST=Boot on fizz dut and observe the LEDs are behaving as expected. Perform suspend/resume test and the LEDs are still working as expected. Change-Id: Ic70587a0cd688e74b5e1ce532c5da954c80cf841 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/22817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-18amd/stoneyridge: Skip VGA initialization on S3 resumeMarshall Dawson
Sync with the other AMD implementations. Change-Id: I222cc7fcf5e58f451cee9621a1b876346226af09 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-18soc/amd/common: Factor out InitPost printed results to functionMarshall Dawson
Make a static function that can report the AmdInitPost() results. This makes it easier to keep lines within 80 columns. Clean up surrounding source. BUG=b:62240746 TEST=Build and boot Kahlee Change-Id: I6d288e76e7510528659436e61fdfa1d5db01f06c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-18soc/amd: Move stoneyridge features out of agesawrapperMarshall Dawson
The AGESA wrapper should not use and CONFIG_STONEY* values, nor should it make any assumptions about the capabilities of a particular device. Move these into stoneyridge northbridge and southbridge files. BUG=b:70670425 TEST=Build and run Kahlee Change-Id: I706edbb6a048b64389ba3077d5df0fe6155070b3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-18soc/amd/common: Remove #ifndef/#endif from AGESA wrapperMarshall Dawson
There isn't a good reason to keep the checks for __PRE_RAM__. The global variables are not used outside of ramstage and the linker removes them cleanly in other stages. BUG=b:70671590 TEST=Build and boot Kahlee Change-Id: I7a35141f212f340c157d57fde8daf93c0c383af8 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-12-18soc/amd/common: Make AGESA event log parser staticMarshall Dawson
The function agesawrapper_readeventlog() is not used outside of the wrapper. Relocate it within the file and make it static. Change-Id: Ia7fefb4eadbace0cc2fb0f519a1acb7906baaf12 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22902 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-18soc/amd/common: Clean up AGESA event log functionMarshall Dawson
Clean up the source for agesawrapper_amdreadeventlog: * shorten the name to help keep lines within 80 columns * convert initializers to C99 * break the call from the callers' if() statements * streamline the printk formatting BUG=b:70671442 TEST=Build and run Kahlee, check console log Change-Id: I402c75e4d65a592b9d1557c5852df03e48e206b9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-18drivers/mrc_cache: Add missing include file to mrc_cache.hMarshall Dawson
Add region.h for use by the struct region_device * in the mrc_cache_get_current() prototype. BUG=b:69614064 Change-Id: I940beac45eb43e804bc84fead7d5337a1c4e2ac1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-18spi/tpm: Clear pending irqs during tpm2_initShelley Chen
Seeing some instances were cr50 spi driver is starting a new transaction without getting a ready interrupt from cr50, which means that there are pending interrupts. Clearing these to be sure there are not any stale irqs for the next transaction. BUG=b:69567837 BRANCH=None TEST=run FAFT and see if any 0x2b recovery boots occur Change-Id: Ie099da9f2b3c4da417648ae10a5ba356b7a093ff Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17drivers/mrc_cache: move mrc_cache support to driversAaron Durbin
There's nothing intel-specific about the current mrc_cache support. It's logic manages saving non-volatile areas into the boot media. Therefore, expose it to the rest of the system for any and all to use. BUG=b:69614064 Change-Id: I3b331c82a102f88912a3e10507a70207fb20aecc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17soc/intel/apollolake: move default y options to CPU_SPECIFIC_OPTIONSAaron Durbin
A non-user configurable option that defaults to y should just be auto-selected instead of instantiating an instance of an option. BUG=b:69614064 Change-Id: I55cf28eaf0233182d4fa488cf4b31e8ad379b6c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17soc/intel/broadwell: remove CACHE_MRC_SETTINGS optionAaron Durbin
The CPU_SPECIFIC_OPTIONS already auto-selects the option. There's no point in having a selectable option that is already selected. There's already an option to select it within intel/common. BUG=b:69614064 Change-Id: I0c7ce7d3f344668587a75ec683343559a4caea99 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17soc/intel/fsp_baytrail: remove nvm headers and codeAaron Durbin
This code is not used at all any longer. Remove it. BUG=b:69614064 Change-Id: I362280f876a335c0cc1c5691b86f5b27e3b5e2c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-17mb/google/poppy/variants/nami: Fix SataMode configuration in devicetreeFurquan Shaikh
Similar to Fizz, SataMode on nami should be set to AHCI. This change fixes the configuration error done in 903472c (mb/google/poppy/variants/nami: Add support for nami board). BUG=b:70160119 Change-Id: Ia88b56ae6bd9121f8447f7c1a2f5a10990fb8ed5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22845 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-17mb/google/poppy/variants/nami: Fix GPIO config for PCH_SPK_ENFurquan Shaikh
PCH_SPK_EN uses GPP_A23 and not GPP_A22. This change fixes the gpio configuration error in the initial change 903472c (mb/google/poppy/variants/nami: Add support for nami board). BUG=b:70160119 Change-Id: I90d9c009369c53cfec47fe77356e181d5ecf7ad5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22844 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-16nb/x4x/raminit: Rewrite SPD decode and timing selectionArthur Heymans
This is mostly written from scratch and uses common spd ddr2 decode functions. This improves the following: * This fixes incorrect CAS/Freq detection on DDR2; * Fixes tRFC computation; tRFC == 78 is a valid timing which is excluded and 0 ends up being used; (TESTED) * Timings selection does not use loops; * Removes ddr3 spd decode and is re-added in follow-up patches using common ddr3 spd functions; * Raminit would bail out if a dimm was unsupported, now in some cases it just marks the dimm slot as empty; * It dramatically reduces stack usage since it does not allocate 4 times 256 bytes to store full SPDs, amongs other unused things that were stored in sysinfo; * Reports when no dimms are present; * Uses i2c block read to read SPD which is about 5 times faster than bytewise read, with a fallback to smbus mode in case of failure, which does seem to happen when the system is forcefully powered off. Change-Id: I760eeaa3bd4f2bc25a517ddb1b9533c971454071 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-16soc/intel/common: remove nvm headers and c fileAaron Durbin
There's no sense in having the nvm abstraction in its own files. Put that support directly into mrc_cache.c. BUG=b:69614064 Change-Id: I0f1a801c6e1a8c35f70faf9e4318bdc45955047a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-16soc/intel/broadwell: implement spi_flash_ctrlr_protect_region()Aaron Durbin
Implement the spi controller flash_protect() callback. No need to have a global spi_flash_protect() once implemented. BUG=b:69614064 Change-Id: I83f4310d8f78ba64727ba75eb75708d0cbaa7d53 Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-16soc/intel/common/fast_spi: implement spi_flash_ctrlr_protect_region()Aaron Durbin
In the fast spi support implement the callback for flash_protect(). This removes the need for having SOC_INTEL_COMMON_SPI_FLASH_PROTECT Kconfig option as well spi_flash_get_fpr_info() and separate spi_flash.[ch]. BUG=b:69614064 Change-Id: Iaf3b599a13a756262d3f36bae60de4f7fd00e7dc Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-15soc/intel/common/nvm: utilize spi_flash_ctrlr_protect_region()Aaron Durbin
Now that there is spi flash controller flash protection use that API so the spi_flash_protect() API can be sunsetted since it was isolated within the Intel code base. BUG=b:69614064 Change-Id: I3908d0e3105b0ef9a0fbf4fc9426ac1be067f648 Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-15drivers/spi/spi_flash: add flash region protection to controllerAaron Durbin
Provide a spi controller specific protection callback to take advantage of special spi flash controllers that have internal protection registers built into the implementation. It's an optional callback for spi controllers. BUG=b:69614064 Change-Id: Ie50a6ce3bbda32620a25dd26fda1af944940bf28 Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-15commonlib/region: expose subregion helper functionAaron Durbin
Export region_is_subregion() for determinig if a region is a child of a parent region. BUG=b:69614064 Change-Id: I6363fe4fdb33342f9d025a726ec7e17e87adf7e0 Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-15util/gitconfig: Make gitconfig a bash scriptMarc Jones
The gitconfig target has a few bashisms and would fail silently on systems that use a POSIX standard sh (like Ubuntu dash). Remove the code from the makefile and put it in a bash script that is called by the gitconfig target. Change-Id: I3bc8cf688a3ad211b57c8ca0e6b1e86c82dc6a37 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-12-15mb/google/snappy: add reset pin for Melfas touch controllerKevin Chiu
Melfas kernel TS driver (melfas_mip4.c) will look up "ce" GPIO during driver probe in ACPI _DSD. But FW does not report "ce-gpios" but "enable-gpios" in _DSD. Kernel will obtain GPIO from _CRS by index "0" without ID. Melfas driver does not have separate condition for MIT-410 so driver will set TS IC power off in probe. FW now may need to add back "reset" pin in order to hack this condition to let Melfas driver get "useless" GPIO so TS IC power (VTSP) will be not off during driver probe by itself. BUG=b:70149336 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: Icf0451ff0c3df97cb2474e30542a2f46ba67d82a Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/22858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-15mb/google/fizz: set SataMode to AHCI modeKane Chen
For Fizz, the default should be AHCI mode and not RAID mode. Additionally, there is only one drive connector, so attaching several drives for a RAID is hard. BUG=b:70146894 Change-Id: I2a9aa2d6281a916c00ff4659a927f164ba0e0705 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22837 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-15soc/intel/apollolake: Remove duplicate selectsMarshall Dawson
Remove Kconfig selected symbols that are duplicates in the same file. Change-Id: I21a3814131f0c8e08732e826dd1bcbb677cbe0aa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22852 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-15soc/amd/common: Update agesawrapper_call.hRichard Spiegel
Solve issues related to agesawrapper_call.h that came up at review 75dd50e233 (review 19724). This includes a hard coded table size and 2 macros: AGESAWRAPPER_PRE_CONSOLE() and AGESAWRAPPER(). Remove AGESAWRAPPER_PRE_CONSOLE(), and replace AGESAWRAPPER() calls with the actual content of the macro. BUG=b:62240989 TEST=Build kahlee with no errors, boot recording serial output and compare to serial output from a build without these changes. Change-Id: Ic51917d3961a51d4e725ff45b04f45eefe149855 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22850 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14soc/intel/skylake: Add integrated LAN config parametersDuncan Laurie
Add parameters to configure the integrated LAN via FSP. Since this takes over a PCI CLKREQ# pin it needs to know which pin it should use, and there are additional parameters for LTR and a "K1 power save" feature. This was tested on a KBL-R board with integrated LAN, verifying that the device is functional under Linux with the e1000e driver. Change-Id: Idb200cec90a3c0d4d9c914bae9983a3bcdafcd06 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/22856 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14drivers/spi: Enable flashconsole in verstageDuncan Laurie
Enable the flashconsole driver in verstage so it can be used with VBOOT enabled. This was tested on a VBOOT enabled system using flashconsole to store the boot log. Change-Id: Icd8a82dc962ece85b9fb3d2f5654369e821922eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/22855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14drivers/pc80/tpm: Remove unused ACPI opregionDuncan Laurie
The opregion and fields are left over from when ACPI ASL code was reading registers to determine the current setup. Now that the ACPI device is generated with the correct information already this code is not used at all and can be removed from the tree. Change-Id: If89d90cc7105ed21e2134ac99224f6f8214cc8ad Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/22854 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-14soc/intel/apollolake: add _RMV attributes to eMMC device ACPIPatrick Georgi
Required so Windows knows if the storage is removable or not. Change-Id: I0822d767ada872d55357ff229e47e08fbe778a36 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/22830 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14soc/intel/common/block/i2c: fix orphaned Kconfig optionsAaron Durbin
The SOC_INTEL_COMMON_LPSS_I2C option is no longer used. Likewise, the SOC_INTEL_COMMON_LPSS_I2C_DEBUG option which is dependent on SOC_INTEL_COMMON_LPSS_I2C is by definition not used either. Therefore, remove SOC_INTEL_COMMON_LPSS_I2C and change the name/dependency for SOC_INTEL_COMMON_LPSS_I2C_DEBUG to SOC_INTEL_COMMON_BLOCK_I2C_DEBUG. BUG=b:70232394 Change-Id: Icd77f028b77d8f642690a50be4ac2c50d9ef511a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22874 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org>
2017-12-14mainboard/intel/glkrvp: Configure Prmrr and Enable SGXPratik Prajapati
Configure PRMRR to allocate 128MiB for SGX enclave memory and enable SGX by default for GLKRVP platform. Supported PRMRR size options: 0x02000000 - 32MiB 0x04000000 - 64MiB 0x08000000 - 128MiB Change-Id: Ifa39df4a1da84bae49551a9626257bda0729752b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-14src/soc/intel/apollolake: include helpers.h in chip.hPratik Prajapati
include helpers.h in chip.h so that devicetree can use macros from helpers.h Change-Id: Idfdee637a9b66a30be31b9ed113e1a44e4032f34 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/22774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-14soc/intel/cannonlake: Fix UART2 serial log broken issueSubrata Banik
Cannonlake rvp serial log has been regressed with commit I7eea910e065242689e87adac41281131674b39af(soc/intel/cannonlake: Clean up UART code) because of common UART code is unable to link all __weak function implementation from SoC uart.c due to existing macro #define __SIMPLE_DEVICE__. Hence UART2 PCI device resource programming is different than what it's been programmed before. This patch ensures UART2 PCI device resource enumeration is working and we are getting serial log as expected. Change-Id: I1f9df5e8d6490090ed65b06bdd0b40f824d36a8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22862 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-14mainboard/google/kahlee: Update overcurrent pinsMartin Roth
The overcurrent pins on kahlee weren't mapped correctly, causing the USB-A port to stop working. None of the EHCI only ports are used for external connectors, so all of the overcurrent pins should go to the XHCI connections. This is also true of the Grunt board. On Grunt, this also means that we don't need OC3, as it doesn't map to anything in the XHCI controller, as it's coming from an internal hub. BUG=b:70636233 TEST=Build & boot Kahlee, verify USB-A port is working again. Change-Id: I53336a18a26bd9be27c7265fddbcd780632656bf Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2017-12-14mb/glkrvp: Enable TouchpadShaunak Saha
This patch enables the APLS touchpad in glkrvp platform. TEST= Boot and test touchpad works. Change-Id: I6f52f7db57ab52b5531e647bde2adbb78b40f76f Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22627 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-14soc/amd/stoneyridge: Remove "\t" from name tableRichard Spiegel
Remove "\t" from name strings in soc/amd/stoneyridge/southbridge.c array irq_association[], and change the print string in soc/amd/common/amd_pci_util.c that use the names from "%s" to "%-20s". This sets a fixed field of 20 characters for the string name, allowing for variable length to the names (up to 20 characters), thus saving memory space used by the strings. BUG=b:70344551 TEST=Build and boot, record output of irq routing and verify alignment. Change-Id: I92dfac9b64932fb0cd3359abd4d1aac651535f1a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-13src/soc/intel/cannonlake: Add _PRW for CNViBora Guvendik
Add _PRW so that wake on WLAN feature works. TEST=Boot to OS and check if WLAN device wakes host. Change-Id: Id6689754d1c4100615e4e4ae5a7f9846f4bf785f Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-12-13mb/cannonlake_rvp: Enable TouchpadShaunak Saha
This patch enables the APLS touchpad in cnl-y platform. TEST= Boot and test touchpad works. Change-Id: I461b9d119b1cac6c8c6cb9b096697f58e00d80ad Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22369 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-13vc/amd/pi/0067F00: add option to add AGESA binary PI as stageAaron Durbin
Stage addition to CBFS allows relocation to happen on the fly. Take advantage of that by adding AGESA binary PI as a stage file so that each instance will be relocated properly within CBFS. Without this patch Chrome OS having multiple CBFS instances just redirects the AGESA calls back into RO which is inappropriate. BUG=b:65442265,b:68141063 TEST=Enabled AGESA_BINARY_PI_AS_STAGE and used ELF file. Booted and noted each instance in Chrome OS build was relocated. Change-Id: Ic0141bc6436a30f855148ff205f28ac9bce30043 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-13soc/intel/skylake: make tcc_offset take effectmarxwang
Currently, "tcc_offset" defined in devicetree is overwritten by Intel FSP-S UPD "TccActivationOffset". This patch will make "TccActivationOffset" refer to "tcc_offset". TEST=check if MSR (0x1a2[29:24]) value is updated with "tcc_offset" by iotools (rdmsr 0 0x1a2). Change-Id: Ibc6f33bea19a1d59bc7e407815210942b38f0702 Signed-off-by: marxwang <marx.wang@intel.com> Reviewed-on: https://review.coreboot.org/22818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-13soc/intel/apollolake: Remove set_subsystem() from SoCSubrata Banik
Intel common PCI driver is handle PCI subsystem ID programming, hence no need to have an explicit soc function to do the same. TEST=PCI subsystem id is getting programming during pci enumeration. Change-Id: I3eb362ff1f3f6d5c81a0dbe854d8ecd59d5a0453 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-13soc/intel/skylake: Remove set_subsystem() from SoCSubrata Banik
Intel common PCI driver is handle PCI subsystem ID programming, hence no need to have an explicit soc function to do the same. TEST=PCI subsystem id is getting programming during pci enumeration. Change-Id: Iead57a286b26d532e578cfff99f412c23fd4c2fe Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-13soc/intel/common/block: Add option to have subsystem_id in common pci driverSubrata Banik
This patch ensures all Intel common PCI devices can have subsystem ID programmed along with PCI resource enabling (.enable_resources) as part of PCI enumeration process. TEST=Build and boot KBL/CNL/APL/GLK to ensure PCI subsystem ID getting programmed. Example: Enabling resources... PCI: 00:00.0 subsystem <- 8086/590c PCI: 00:00.0 cmd <- 06 PCI: 00:02.0 subsystem <- 8086/591e Change-Id: I46307b0db78c8864c85865bd0f3328d5141971be Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22768 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-13device: Make pci_dev_ops_pci structure globalSubrata Banik
This patch makes pci_dev_ops_pci structure global so that caller can make use of this structure using extern. Change-Id: I8de919aacccbc062475fb04f59ffb4957d3460b9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-13mb/google/poppy/variants/nami: Disable native SD card controllerFurquan Shaikh
This change selects Kconfig option to disable native SD card controller in ACPI tables, since it is not used on nami. BUG=b:70160119 Change-Id: I6180c2b342c69e6a7c357f10b6297d67ea0211d7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/22825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-13mb/google/fizz: Enable SATA on port 0David Wu
Enable SATA port 0 to support SATA HDD. BUG=b:69950854 BRANCH=None TEST=emerge-fizz coreboot and boot on fizz dut Change-Id: Ifbf5950151758286f8bff7250a68d9d0b3975ef9 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/22815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-13soc/intel/skylake: Enable LPC IO Decoding on PCRpraveen hodagatta pranesh
According to the PCH BIOS Spec (Doc#549921/Rev-2.3.4), section 2.5.1.6, it is a requirement to program the same value programmed in LPC "PCI offset 82h" into "PCR[DMI]+2774h" to fully enable the Lpc IO enable decoding which is missing in current source. Without above changes, Skylake Saddlebrook platform with a SIO does not boot. Change-Id: Ief26e2718325b9d74ea0f83d47d2f917e0972173 Signed-off-by: praveen <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/22819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-12util/cbmem: Print timestamp frequency in verbose modeMartin Roth
The code flow is changed slightly to print the timestamp frequency from either method of determining it. BUG=b:70432544 TEST=Build and test cbmem -t -V Change-Id: I02286fa67919e70a3592cdbcc1c9ca2991b7f385 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22821 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-12google/kahlee/grunt: Add SPD filesMarc Jones
MEM_ID SPD 0000 hynix-H5AN8G6NAFR-UHC 0001 hynix-H5ANAG6NAMR-UHC 0010 micron-MT40A51216JY-083E 0011 micron-MT40A1G16KNR-075E 0100 samsung-K4A8G165WB-BCRC 0101 samsung-K4AAG165WB-MCRC BUG=b:69268926 TEST=build test Change-Id: I1fd6335b3f8842252c42009a0a91a5b6ed3ea238 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-12vc/amd/pi/00670F00: fix #include paths to only use <amdblocks/header.h>Aaron Durbin
Ensure that soc/amd/common/blocks/include is the only #include path for the AMD common code. This removes the duplicate soc/amd/common include as well using the correct #include header in AGESA.c. BUG=b:69262110 Change-Id: I50d85b28514fd905df415f0cc052b9924ee4e741 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-12google/scarlet: support INNOLUX P097PFG panelLin Huang
Add INNOLUX P097PFG panel timing. According to Scalet schematic, if GPIO3_D4 get low status, it will use INNOLUX P097PFG panel; if GPIO3_D4 get high status, it will use KD097d04 panel. Change-Id: I43fa5d859a9a529a84c58a953b37d03953ce648a Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-12soc/amd/common: Move AGESA related source filesRichard Spiegel
Move AGESA related source files in soc/amd/common under block directory. Folder soc/amd/common/block subfolders should mimic soc/intel/common/block subfolders (one subfolder per subject). BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, just folder reorg). Change-Id: I497cdefe64e8dff00aaff7153c4ffa9c57c9acf8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-12soc/amd/common: Move Agesa related headersRichard Spiegel
Move AGESA related headers in soc/amd/common to soc/amd/common/block/include/amdblocks. BUG=b:69262110 TEST=Build with no error gardenia and kahlee (no code change, headers moved). Change-Id: I5d3064625ddf8caaf370aabaf93165c6817f1ca0 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-12nb/intel/x4x/rcven.c: Fix programming coarse offsetArthur Heymans
This fixes some bitwise logic errors that caused the coarse offset not to be programmed. This fixes a regression introduced by 6d7a8c "nb/intel/x4x/raminit: Rework receive enable calibration" where the coarse offset doesn't get programmed anymore. TESTED on Foxconn g41s-k on a DIMM where the final DQS receive enable delays are close but above and below the edge of a coarse delay setting. Change-Id: I41869815f782a2ea1178bdea006e3a7587441323 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-12mb/lenovo/t400/blc.c: Add a new panel to the listArthur Heymans
Also adds a comment in the code to clarify what this array is about. Change-Id: I04b185a5dbd7a7ccb039820f19d2cb549b9a2eac Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-12-12drivers/intel/gma: Power up legacy VGA block earlyNico Huber
This is required at least on Skylake to be able to configure text mode. 3rdparty/libgfxinit is also updated by the single commit: 42fb2d065d gma: Add procedure to power up legacy VGA block Change-Id: I2fe144765e2b2acd9f6b76db375cae5b8feb5489 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/21386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-12mb/google/poppy/variants/nami: Implement variant_memory_paramsFurquan Shaikh
This change provides implementation of variant_memory_params for nami. Since it uses DDR4 memory, DQ-DQS mapping table is not required. Also, Rcomp resistor values are provided based on SDP v/s DDP memory. BUG=b:70188937 Change-Id: Ic1d0cfdb7d8b02fa0be0a4c54b20057a4c2fc3ce Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11mb/google/poppy/variants/soraka: Tune I2C5 paramsFurquan Shaikh
This change updates scl_lcnt value for I2C5 to bring the bus frequency closer to 400kHz. BUG=b:65062416 TEST=Verified that I2C5 frequency is between 389-396kHz. Change-Id: Ibaccab0c797174332633cb75e30d18ff5af76a43 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11soc/amd/common: Move files to common/blockRichard Spiegel
The following files need to be moved: amd_pci_util.c, amd_pci_util.h and spi.c. The remaining files are AGESA related and will be part of a separate issue/commit. BUG=b:62240201 TEST=Build with no error gardenia and kahlee (no code change, just folder reorg). Change-Id: I3f965afa21124d4874d3b7bfe0f404a58b070e23 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-11soc/intel/cannonlake: Add support for D0 steppingLijian Zhao
D0 stepping with CPUID 0x60663 need to be added in coreboot. TEST=Boot up with D0 stepping processor Change-Id: I3b0f2616843367d2bfbee1b5bf75772b9e83e931 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11google/gru: Stop mucking with unused I2S0 pins in codec configJulius Werner
Due to a schematic error, our code was written to configure more I2S0 pins than are actually used. We're also pinmuxing the whole bank of pins over to the I2S controller even though we don't need them all. Restrict the GPIO initialization and pinmuxing to the pins we really need so the other ones can be correctly used as SKU ID pins on Scarlet. Also, move the "audio" IO voltage domain selection to the other such selections in the bootblock, since that covers two whole banks of GPIOs and there's no guarantee that they're all used for audio (and thus not needed before ramstage). BUG=b:69373077 TEST=Booted Scarlet, confirmed correct SKU ID (7) was detected on rev2. Change-Id: I9314617e725fe83d254984529f269d4442e736f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org>
2017-12-11google/gru: Change Scarlet SKU ID pins to pull-upsJulius Werner
These pins need to be pull-ups. I forgot. BUG=b:69373077 Change-Id: I9314617e01d35898254984529f269d4442e736f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-11mainboard/purism/librem_skl: Fix line length > 80 charactersMartin Roth
Make lint-stable was giving an error on this. Change-Id: I06d11d86151f683b82b6df537e3de8c52d33e8b4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-12-11soc/amd/common: Collect timestamps before and after AGESA callsMartin Roth
BUG=b:70432544 TEST=Build & boot kahlee. Look at timestamps. Change-Id: I8209160f8e23ab77987f8e515c7b00d94f68c8be Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-12-11commonlib: Add timestamp codes for AGESAMartin Roth
BUG=b:70432544 TEST=Build & boot kahlee. Look at timestamps. Change-Id: I3bf691a0fb1f5c09e7b6c9965c9e506393ec31f6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11google/nautilus: Add Maxim98357a supportNaveen Manohar
Adds Maxim98357a support for Nautilus using the generic driver in drivers/generic/max98357 BUG=b:68686020 TEST=With entire merged audio should be enabled on max98357 speaker codec. Change-Id: I958bf7c1395259b3e3fb30332882fd51a48dc0cc Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/22458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-11mb/google/poppy/variants/nautilus: add SPK DMIC nhlt supportNaveen Manohar
Nautilus board uses max989357a speaker codec and 4CH DMIC. Select the appropriate NHLT blob to be packaged in CBFS. Also generate the required ACPI NHLT table for codec and the supported topology in nautilus. BUG=b:68686020 TEST=With the required driver support in kernel verify that the Audio plays on Speaker and captures on 4CH DMIC Change-Id: Ie90af02e0935029f53f9020bd78027b6eb31a187 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/22457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-11AMD fam10: Link southbridge/amd/rs780/early_setup.cArthur Heymans
Removes rs780_before_pci_init() since it was a no-op anyway. Removes get_nb_rev() since this function is provided via a macro in the header. This Makes a lot of function non-static since the header has prototypes for these. Change-Id: I8933516771d959583bbd59a5c1beee3e30a7004f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-12-11intel: Use MSR_EBC_FREQUENCY_ID instead of 0x2cElyes HAOUAS
Change-Id: Ib1b761fc417f1bb000f408d3bed5e8666963f51d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/22603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-11vc/amd/pi/00670F00/binaryPI: cache the AGESA dispatcherAaron Durbin
Instead of repeatedly walking cbfs for the AGESA blob and parsing it cache the resulting dispatcher value. There's only one dispatcher table so use it. The resulting change is that this work is done one time per stage. BUG=b:70401101 TEST=Booted and noted only one lookup per stage. Change-Id: Iaa4aecc384108d66d7c68fc5fb9ac1c3f40da905 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22789 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2017-12-11soc/amd/stoneyridge: Enable SPI writesJohn E. Kabat Jr
- Change soc/amd/stoneyridge/Kconfig to set BOOT_DEVICE_SUPPORTS_WRITES BUG=b:65485690 TEST=Build & boot kahlee. Change-Id: I595a27ac27daa42c2499de1a343bc30be9a89fa6 Signed-off-by: John E. Kabat Jr <john.kabat@scarletltd.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-11soc/amd/common: Add amdblocks/spi.hMarc Jones
Add the spi header for spi function prototypes. Fixes spi.c build error for the missing header. Change-Id: I0dbb5bf84cc3462a7aa58a5531d6b8b8bc8ca4df Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-10sb/intel/i82801jx: Hook up spi codeArthur Heymans
Change-Id: Ie83c800a0bcd12fa501c91a1c2b1ee756de9d732 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-10sb/intel/common: Add SOUTHBRIDGE_INTEL_COMMON_SPIArthur Heymans
This introduces a Kconfig option to include common Intel SPI code. Change-Id: I970408e5656c0e8812b8609e2cc10d0bc8d8f6f2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-12-09Documentation/Intel: Add NativeRaminit documentationPatrick Rudolph
Add documentation for Intel native raminit on Intel SandyBridge. Documented so far: * Register * Read training * Frequency selection * SMBIOS type 17 memory reporting * Various Kconfig options and features Change-Id: I3b977460ecb29c9a54e3fab82349982fca9918e7 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-09mb/intel/glkrvp: Add gpio.h in dsdt.asl fileShaunak Saha
Add proper variants gpio.h in dsdt.asl where the GPE_EC_WAKE and EC_SCI_GPI is defined. Change-Id: Ideb6dd4d0ac496a81721cd883865218cb19583d9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-09nvramtool: Add dummy cmos-hw-unix accessor implementation for non-x86Paul Kocialkowski
The default implementation uses inb/outb, that is not available on ARM platforms and others. A dummy implementation allows building nvramtool on these platforms. Change-Id: I75e4a1a0cbd35ca40f7b108658686839ccf9784a Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/22562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-09soc/intel/skylake: add acoustic noise mitigation params for FSP 1.1Matt DeVillier
Adapted from Chromium commit d6655eb [Skylake: create UPD Interface for acoustic noise tuning] Add FSP 1.1 params needed for acoustic mitigation on google/caroline (to be upstreamed in a subsequent commit). TEST: build/boot google/caroline Change-Id: Ifb36ecef8c1735c63a5322d952929e9c34cddfb9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-09intel/i440bx: Correct RAM init programmingKeith Hui
Corrects MBSC/MBFS programming when initializing DRAM on boards with both 3 and 4 DIMM slots. Reformats comments to current coreboot standards. Drops some romcc "optimizations" no longer necessary. Boot tested on asus/p2b-ls, where it fixes a memory related hang after SeaBIOS resets the board with nothing to boot from. Change-Id: Ib8c21489338643e13f69bd58008d14733796d4d0 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-09soc/amd/stoneyridge/include: delete amd_pci_int_types.hRichard Spiegel
Due to review 20b8c821e4 being abandoned and review 376dc82dca being merged, file amd_pci_int_types.h became orphaned (not included by any file), while an array similar to intr_types[] (but that also includes the associated register index) was created in southbridge.c replacing the original array functionality. Remove the header amd_pci_int_types.h from the repository. BUG=b:70328428 TEST=Build kahlee with no errors. Change-Id: I53a9d7ebb27edbc4e136c9b17f5c709930e35223 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-09google/cyan: fix FSP memory init paramsMatt DeVillier
In the original Chromium source, PcdMemorySpdPtr is only set for cyan, but none of the other Braswell variants. When upstreamed, it was left set for all boards as it didn't appear to be problematic. In wider testing, I came across one reks board for which it caused FSP memory init to fail, so restricting the parameter to cyan only as it was originally. TEST: build/boot google/reks with Micron EDF8132A3MA-JD-F RAM, observe board now successfully boots where it did not previously. Change-Id: Iacfbd4bc89fa04717baf85704181d346bca2ed2f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22782 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-09soc/intel/cannonlake: Clean up UART codeAamir Bohra
Clean up and move UART related code under a single uart.c file. Change-Id: I7eea910e065242689e87adac41281131674b39af Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-09Update vboot submodule to upstream masterMarc Jones
Updating from commit id 3b80572: 2017-10-12 16:35:30 -0700 - (tlcl, tpmc: extend GetVersion to report vendor specific data) to commit id f6780a3: 2017-12-01 14:54:40 -0800 - (firmware: header tweaks for depthcharge) This brings in 19 new commits. Change-Id: I49b1349cfd9266cd815b68759ae89bdffdd0d74b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22777 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-09mainboard/google/kahlee: Update GPIOsMartin Roth
- The touchscreen interrupt was moved from the GPIO 3, as originally suggested to GPIO 11. This changes the gevent from 2 to 18. - Add EMMC reset on GPIO 93. - Add EMMC bridge PCIe reset on GPIO 40. - Set device enables to high. - Remove extra SCI comment from GPIO 130. - Set individual device PCIe reset pins to high. - Enable global PCIe reset on GPIO 26. - Mark LPC_CLK1 as unused. - Update net names based on latest schematics. - Set Direction and level/edge correctly for SCIs/SMIs. - Remove SCI for pen detect. - Add comments. BUG=b:70234300, b:69681660, b:69305596 TEST=build grunt Change-Id: Ib591e4278ed23d0963ecb19ad9c326498b4c7796 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-09mainboard/google/kahlee: Update PCIe port mapMartin Roth
- Grunt moved the EMMC chip to port 2, where Kahlee had the SD reader on PCIe port 1, so move the OemCustomize file into the variant directory. - Add comments in baseboard version so it's easier to understand. - Update reset pins, put the definitions in gpio.h BUG=b:70255003 TEST=Build and boot Kahlee. Build Grunt. Change-Id: I78ec72e9d6fd52b8ac75e7187bd01ee7ddc3ba2a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-12-08src/mainboard/glkrvp: Turn on CPU fanSrinidhi Kaushik
On GLK EC does not support temperature reads and does not control the fans anymore, OS is responsible fan control through EC. This hack enables running of the fan for boards without External EC. Change-Id: I361e53d4fd53678f3abb8fe9862071aec6e149a7 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/22235 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-12-08vendorcode/intel/fsp/fsp2_0/glk: Update header files as per v69_51Ravi Sarawadi
Update FSP header files to match FSP v69_51. UPD updates in FSP v69_51 are: - SGX Epoch - Sub/System Vendor ID - Remove deprecated UPD Change-Id: I7298615a6e051061b948814a1cd9cbd42f6574b5 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/22391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-08mb/intel/glkrvp: Fix CLKRUN gpioShaunak Saha
This patch does not put CLKRUN in IOSTANDBY. Change-Id: I7fedd729d3bb66c2b52a63166e461f8760457721 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-12-08soc/intel/apollolake/acpi/cnvi.asl: Add _PRW for CNViHannah Williams
Add CNVi GPE in _PRW for wake on WLAN from S3 Change-Id: I682c76b9c5c524face7b540ecb185a3d7b4b2da3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/22639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 12:04:58 +0000