| Age | Commit message (Collapse) | Author |
|---|
|
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for samsung boards lumpy and stumpy. 0x8000 unused
flash space is allocated for RW_NVRAM.
Previously BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES was selected for
CPU_INTEL_HASWELL, CPU_INTEL_MODEL_{2065X,206AX} and others (see [2]).
However, there seems to be no particular reason on those platforms.
We've dropped the config for haswell. Now drop it for
CPU_INTEL_MODEL_{2065X,206AX}, so that VBOOT_VBNV_FLASH can be enabled.
[1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1
[2] commit 6c2568f4f58b9a1b209c9af36d7f980fde784f08
("drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES config")
BUG=b:235293589
TEST=./util/abuild/abuild -a -t SAMSUNG_LUMPY -x
Change-Id: I833edd4f7a328b21e81c971ba8a9aec0aad7d3d3
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This change adds 2 command line parameters, --skip_set and --skip_unset
that allows abuild to skip boards with particular Kconfig values either
set or not set.
Note that it only works on BOOL type variables.
This can be set on the abuild command line, or the JENKINS_ABUILD_OPT=
variable on the make command line.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I43336484cf25f83065ec7facf45c123d831024b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Since things are done a bit differently on Stoneyridge, it's probably
safer to run a test instead of assuming that the test on Picasso was
sufficient to be reasonably sure that this will also work as expected on
Stoneyridge.
TEST=No change of ACPI-related messages in dmesg with this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I432752fae8be08d3cbd7d30215b350c4528c7206
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Create the constitution variant of the brask reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:267539938
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CONSTITUTION
Change-Id: Idb6089561d3aa5aac4448f9d46347c731f027e9c
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72730
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new set of errors that will be used by the introduced EFI
non-volatile variable store in flash.
Change-Id: I6baea9fb138d1a2755d22a3d587105793adb9c90
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
ACPI Revision 6.0 deprecates Processor keyword, so use
acpigen_write_processor_device() instead.
Change-Id: I31626f4e323dd9053a63c0f5e89d1685103e4bd4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I85fc5dabf10c6df7f11fd1defe8a39afc9f95325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72797
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of just printing the register contents, normalize the contents
of the base and limit registers to actual MMIO addresses and then print
those. This will hopefully avoid some confusion caused by the shifted
addresses.
Output on Mandolin before the patch:
=== Data Fabric MMIO configuration registers ===
Addresses are shifted to the right by 16 bits.
idx control base limit
0 93 fc00 febf
1 93 1000000 ffffffff
2 93 d000 f7ff
3 1093 fed0 fedf
4 90 0 0
5 90 0 0
6 90 0 0
7 90 0 0
Output on Mandolin after the patch:
=== Data Fabric MMIO configuration registers ===
idx control base limit
0 93 fc000000 febfffff
1 93 10000000000 ffffffffffff
2 93 d0000000 f7ffffff
3 1093 fed00000 fedfffff
4 90 0 ffff
5 90 0 ffff
6 90 0 ffff
7 90 0 ffff
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I62eeb88ddac6a7a421fccc8e433523459117976a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This moves the definition for POST_BOOTBLOCK_CAR from the intel-specific
postcodes into the common postcode list, and uses it for the
cache-as-RAM init as needed.
Because POST_BOOTBLOCK_CAR was set to 0x20 in some spots and 0x21 in
most of the others, the values were consolidated into 0x21. This will
change the value on some platforms.
Any conflicts should get sorted out later in the conversion process.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8527334e679a23006b77a5645f919aea76dd4926
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This patch enables GSPI [1] interface for mtlrvp based on mtlrvp
schematics.
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump and
able to boot mtlrvp (LP5/DDR5) to ChromeOS. (Base patch for CB:71223)
SPI[0].Mode = 0
SPI[0].DefaultCsOutput = 0
SPI[0].CsMode = 0
SPI[0].CsState = 0
SPI[1].Mode = 1
SPI[1].DefaultCsOutput = 0
SPI[1].CsMode = 0
SPI[1].CsState = 0
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I3d4c4f19dd80fefa80c365b5ecac0a234f5af860
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables PCIe port for WLAN as per mtlrvp schematics
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS. Ensure that WLAN module gets
is enumerated as part of lspci in AP console.
ae:00.0 Wireless controller [0d40]: Intel Corporation XMM7360 LTE
Advanced Modem (rev 01)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ief3c0eff40ced57d29ce343e569b6b392c27ad74
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72778
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables EC_GOOGLE_CHROMEEC_SWITCHES for MTL_CHROME_EC which
helps in mode switch using dut-control power_state:rec.
BUG=b:224325352
BRANCH=None
Test=Able to build and boot MTLRVP to ChromeOS. Check if chroot command
dut-control power_state:rec puts the DUT to recovery mode.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I5de0cd6c9a50bd85238205e09976a8bd8dd7142f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables PCIe port for WWAN as per mtlrvp schematics
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS. Ensure that WWAN module
gets enumerated with cbmem -c.
\_SB.PCI0.RP07: Enable RTD3 for PCI: 00:1c.6 (Intel PCIe Runtime D3)
\_SB.PCI0.RP07: Enable WWAN for PCI: 00:1c.6 (Fibocom FM-350-GL)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ib372db9642a3c7b3a21a112fa0e6e0b4bc88a9ea
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72777
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds ACPI support for Type-C ports.
BUG=b:224325352
BRANCH=None
Test=Able to build and boot MTLRVP. Verify SSDT for the corresponding
entry,
\_SB.PCI0.PMC.MUX.CON0 under Device (CON0)
\_SB.PCI0.PMC.MUX.CON1 under Device (CON1)
\_SB.PCI0.PMC.MUX.CON2 under Device (CON2)
\_SB.PCI0.PMC.MUX.CON3 under Device (CON3)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I8e5957ca7a6c542a64d79b2ceefbed79ead15811
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72789
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Found-by: linter
Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b
Signed-off-by: Alexander Goncharov <chat@joursoir.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ELAN updated the datasheet, the HID/I2C protocol's T3 delay
time is 150ms now. Modify the kano's delay time to follow
the requiremnet.
BUG=b:247944006
TEST=Manually checked touchscreen works after reboot and suspend.
Change-Id: I42a7737060a82c0b27717f1510b8ec64abd1465a
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paz Zcharya <pazz@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Flashrom needs libgpiod-dev to build the new bitbanging programmer
driver for Linux libgpiod.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I88f7e11fab115487cc44d4b89b3eab4745ad058d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Add extended capability ID for Address Translation Services. This
definition can be found in PCI Express Base Specification rev6.0
9.3.7.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I777070ea223fc7e83c510c8eadbe4e028825eef6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71929
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: If80cc5396703cef41cc615008c9f0dac0b7bbb09
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Glinda SoC, remove it form the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I627d05c09d9637caf15e17285dd2c8e0389747c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Phoenix SoC, remove it form the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I24ad0a2fbc5a973c0cb40ed10942b5efc31191aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Mendocino SoC, remove it form the global NVS
and add an ACPI object for this in the DSDT of the mainboards that use
it in their ACPI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1ed0407826f579eb14169246b7b14ba677c20e8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Cezanne SoC, remove it form the global NVS
and add an ACPI object for this in the DSDT of the mainboards that use
it in their ACPI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6953da5e0f1966aa3022364d9a9c72ebafc698cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Picasso SoC, remove it form the global NVS
and add an ACPI object for this in the DSDT of the mainboards that use
it in their ACPI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia265f3eebf5e48c185d2e4bf4ef74f8eab7c9606
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Since the LIDS field is only used in the ACPI code and not in the C code
of any mainboard using the Stoneyridge SoC, remove it form the global
NVS and add an ACPI object for this in the DSDT of the mainboards that
use it in their ACPI code. Eventually the LIDS object should probably be
moved to the EC's ACPI code, but that's out of scope for this patch.
TEST=google/liara doesn't show ACPI errors in Linux' dmesg
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I778c4189607035b4765c6cb8b2e74030dcf9069f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This simplifies the code flow of the cpu init. APL can do CPU init after
calling FSP-S, while GLK needs to do that before. This is now reflected
directly in the cpu ops rather than using
CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT as a proxy.
Change-Id: I7fd1db72ca98f0a1b8fd03a979308a7c701a8a54
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
By default this limits PCI buses to CONFIG_MMCONF_BUS_NUMBER.
Some platforms have multiple PCI root busses (e.g. xeon_sp), where bus
numbers are limited. This provides a basic check. On some platforms it
looks like programming 0xff to the subordinate bus number confuses and
hangs the hardware.
Change-Id: I0582b156df1a5f76119a3687886c4d58f2d3ad6f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
This patch adds below chip configuration for I2C devices for mtlrvp.
+-----------+--------------------+-------------+
| INTERFACE | PCI Number (B:D:F) | DEVICE |
+-----------+--------------------+-------------+
| I2C0 | 0:0x15:0 | CAM1 |
+-----------+--------------------+-------------+
| I2C1 | 0:0x15:1 | CAM0 |
+-----------+--------------------+-------------+
| I2C2 | 0:0x15:2 | NC |
+-----------+--------------------+-------------+
| I2C3 | 0:0x15:3 | HID |
+-----------+--------------------+-------------+
| I2C4 | 0:0x15:4 | NC |
+-----------+--------------------+-------------+
| I2C5 | 0:0x15:5 | NC |
+-----------+--------------------+-------------+
BUG=b:224325352
BRANCH=None
TEST=Able to boot mtlrvp (LP5/DDR5) to ChromeOS. Also verify serial bus
enumeration through lspci.
00:15.0 Serial bus controller: Intel Corporation Device 7e78 (rev 01)
00:15.1 Serial bus controller: Intel Corporation Device 7e79 (rev 01)
00:15.3 Serial bus controller: Intel Corporation Device 7e7b (rev 01)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ia5964472be902041f961187c0072a89055badd4f
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables display configuration for mtlrvp. The change follows
mtlrvp schematics.
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump.
Also verify display over eDP and HDMI.
DdiPortAConfig : 0x1
DdiPortBConfig : 0x0
DdiPortAHpd : 0x0
DdiPortBHpd : 0x1
DdiPortCHpd : 0x0
DdiPort1Hpd : 0x0
DdiPort2Hpd : 0x0
DdiPort3Hpd : 0x0
DdiPort4Hpd : 0x0
DdiPortADdc : 0x0
DdiPortBDdc : 0x1
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I05bd7427d6a339ee200731a8dd448e85efc694e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch removes the configuration of GPP_A12 for mtlrvp. Garfield
Peak (WLAN) doesn't use GPP_A12 for WAKE_N. Configuring GPP_A12 pin
prevents system entering G3 (reboots) on issuing shutdown -h now. Hence
configuring GPP_A12 as PAD_NC.
BUG=b:224325352
BRANCH=None
TEST=On issuing 'shutdown -h now' system enters G3
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I5e46b8afd3e0055440fd3c3db4aa5a9f1d4aa556
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
This is to warn if a user add to Makefile a path to nonexistent
directory.
Change-Id: I5a30c3830f30509deaaadc6eaeab0e17bc08565c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70251
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't need flashrom support just for vboot payloads. The current
default (USE_FLASHROM=1) is mostly harmless, especially if libflashrom
is not present (the autodetection in vboot_reference just spits out a
pkg-config error but doesn't actually fail the build), but it's better
to be clear we don't need it.
BUG=b:172225709
TEST=build
Change-Id: I53bcc2d1e7666646ddad58ba3717cfdd321014e8
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72716
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I819633d8d6d1886b48d53e73923add444ca032e4
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72724
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
And make less levels of indentations in the code.
Change-Id: Ib8cae386eace4f423bde9c252992625e1ff3c690
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
1. Enable Cnvi BT Audio Offload feature and also
configure the virtual GPIO for CNVi Bluetooth I2S pads.
2. According to the SOC_GPIO_Table_20230116,
Change GPIO GPP_D15, GPP_D16 to NC.
BUG=b:264834572
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I4901c8cd660f2d47018e4cccdb67f666f0800423
Signed-off-by: Jamie chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72035
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
This variant was added without a devicetree, so add the board
specific devicetree according to schematic_20230110.
BUG=b:263060849
BRANCH=None
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: Ie05c152a20953e3e2d5f4ba5f9c00160a3e418e1
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
NVMe PCIe 9-12 using clk_src1 and clk_req2 mapping to hardware design,
Due to inconsistency between PMC firmware and FSP, we need to set
clk_src to clk_req number, not same as hardware mapping in coreboot.
Then swap correct setting to clk_src=1,clk_req=2 in mFIT.
BUG=b:265720813
TEST=build firmware and veirfy suspend function on DUT.
Cq-Depend: chrome-internal:5351299
Change-Id: Ia057dfa98cb9293d9e212edb4e4ac198e94e8985
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72051
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn off camera power during S0ix to improve power consumption.
BUG=b:265754302
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ie2b300783adfc1cab30bc897d086a3674436724a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100
MHz starting the board version of the current phase.
BUG=b:260127676
TEST=Build and boot to OS in Frostflow with 100 MHz SPI bus speed.
Observe that the boot time improved by 100 ms compared to 66 MHz SPI
flash bus speed.
firmware log:
SPI fast read speed: 100 MHz
At 66 MHz:
Total Time: 1,563,384
At 100 MHz:
Total Time: 1,462,570
Change-Id: I9435f4ad0d3541b040703dc9a453badbd080dc09
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Fix:
cc1: error: src/vendorcode/amd/pi/00670F00: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/binaryPI: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Include: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Common: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/CPU: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/CPU/Family: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Fch: No such file or directory [-Werror=missing-include-dirs]
cc1: error: src/vendorcode/amd/pi/00670F00/Proc/Fch/Common: No such file or directory [-Werror=missing-include-dirs]
Change-Id: I745f4fc421c91c413fe0d3155d3494ed9704eeb6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This allows the user to pass one or more arguments through the testsoc
script to abuild.
Example:
testsoc -K SOC_AMD_CEZANNE -a "--skip_unset BOARD_GOOGLE_NIPPERKIN"
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic2bc8d656022560ed1eebf6eee0512d3633ebe84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72766
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Not exactly sure about the usb4_xhci controllers, but for now I assume
those will behave like any other XHCI controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22384f58e245a1486793831d29d22e9c618f646c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The PCI Device ID Assignments table from PPRs #57019 Rev 1.65 and
PPR #57396 Rev 1.54 were used as a reference. Some devices will need to
have ops added in future patches. Since the xhci_2 device isn't there
any more, also drop it from the mainboard devicetrees. The actual USB
port configuration on xhci_0 and xhci_1 is updated in the next patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49721bc44fa1e2a0118a8c3ac79a36aee64be687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Now that the PCIe ports on device 1 are added, rename the aliases for
the PCIe ports on device 2 to have a common naming scheme. For phoenix
the device alias names are based on the device and function number the
bridge is connected to.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5f5698408019bb9222b599dd78540ca1b187b56d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72737
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only the PCIe ports on the functions of device 2 were present in the
devicetree and had the amd_external_pcie_gpp_ops ops assigned. Add the
missing PCIe ports on the functions of device 1 and assign the
amd_external_pcie_gpp_ops ops to them.
This SoC uses a slightly different naming scheme for its PCIe GPP ports.
Previously the PCIe GPP bridge number from the PCI Device ID Assignments
table from the PPR was used. Those bridge numbers are one less than the
function numbers of the device. This is due to function 0 being a dummy
bridge to avoid having to shuffle around the function numbers when the
first bridge is unused, since the PCIe specification mandates the
function 0 to be implemented if any other function on the same device is
implemented. In order for the device aliases to be consistent with the
PCIe device and function numbers which is way more commonly used and
also what lspci shows and what goes into the DXIO descriptors, change
the naming scheme of the aliases.
This was checked with PPR #57019 Rev 1.65 and PPR #57396 Rev 1.54.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib5c62c1df585877d9b6986a462a3636d4f2eb4c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72736
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This enables L1.2 for the SSD port.
link_hotplug is unused on Mendocino, so remove it while I'm here, just
as code cleanup. This has no functional difference.
Enabling L1.2 on other devices currently causes problems. Debug is
ongoing.
BUG=b:265890321
TEST=Build & boot, look at states enabled in lspci. Test device
functionality.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8940856a127c8a4ba45148cbbf07a08b621beb4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch requests FSP to enable the MRC fast boot feature along
with FSP v2473.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If4a621e55c853505f7a702181ae5a70dc56d5b5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72745
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops the WFC sensor OV8856 (reused from the Brya chassis)
support for Rex and added support for Rex specific UFC sensor OV13B10.
BUG=b:267264348
TEST=WFC MIPI cameras have been enabled using google/rex Proto 1.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic785b82db4368f40d91921f29c218cf417938541
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70226
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Enabling `SaGv` along with FSP v2473 is causing blank display issue.
Mostly likely we shouldn't enable SaGv yet on Intel MeteorLake.
BUG=b:267446159
TEST=Able to see ChromeOS UI in consecutive boot.
This reverts commit cbca81c5946384843197c08401c4266f45fef4a2.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ifbcc36515f7550c183c40e5af94684f5c3e39a7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72774
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit b171f768127d ("soc/amd/*: Hook up GPP bridges ops to devicetree")
missed adding the amd_external_pcie_gpp_ops ops to the gpp_gfx_bridge
PCIe ports, so add them. Those devices were previously covered by the
PCI_DID_AMD_FAM17H_MODEL60H_PCIE_GPP_D1 PCI device ID in the list that
got removed in the referenced commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I55434bf486569b32901b3840193a09cc5955abb2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This switches the Picasso SoC to use the common reset code.
Picasso supports warm resets, so set the SOC_AMD_SUPPORTS_WARM_RESET
flag.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I52515b20ef6c70b137f176d95480757b16bd8735
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72755
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This switches the Phoenix & Glinda SoCs to use the common reset code.
Cezanne and newer do not support warm reset, so use cold resets in all
cases (including the OS).
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4593fa9766ac9e988722a02e355c971e147b8fae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72754
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This switches the Cezanne & Mendocino SoCs to use the common reset code.
This patch does not change any behavior on those chips.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie05c790573e4e68f3ec91bacffcc7d7efb986d79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72659
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows us to use the same file for PCO, CZN, MDN, PHX, & Glinda.
PCO supports the warm reset, and future chips can support it by setting
the SOC_AMD_SUPPORTS_WARM_RESET option.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib6459e7ab82aacbe57b4c2fc5bbb3759dc5266f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72658
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On family 15h and 16h processors with PSP, the PSP firmware type 0x5f
corresponds to AMD_FW_PSP_SMUSCS, while on family 17h and 19h this
corresponds to AMD_FW_TPMLITE. Add comments to those two enum values to
clarify this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia5c125ec6a0eb548f58a457f9040278391d2101c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
TESTED with x220 logs.
Change-Id: I89023b6c6dd5d985168331fbb12b2fc36fb65dc3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Removing default on/off from mainboard devicetrees is left as a follow-up.
Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
No BS_ON_EXIT hooks are run on BS_PAYLOAD_BOOT or BS_OS_RESUME, so don't
allow these hooks.
Change-Id: I318165f0bd510aed3138d3612dd3e264901aba96
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
No bootstate hook is called on exit of BS_OS_RESUME or BS_PAYLOAD_BOOT.
Change-Id: I2b5b834d0663616a9523fd119f007e3bac8e7bf2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:266696987
BRANCH=None
TEST=Observe kernel ec panic handler run when ec panics
Change-Id: I9b50ab3c0bcef192ef89f173852cda222f1533c7
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Enable the HPD GPIO so that the USB-C port can be used for
DisplayPort.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If93d08f64cf7b09bb47622bdc7f22280b8a48174
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72431
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For the PHX, it uses subprog 0.
For the PHX2, it uses subprog 1.
Change-Id: Ib013f264fc9940ad95e559fe19bba72c06a19625
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch enables CNVi_BT Core and Wifi for mtlrvp based on mtlrvp
schematics.
1. Enable CNVi BT Core in device tree
2. Enable CNVi Wifi (pci 14.3) device in device tree
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump and
able to boot mtlrvp (LP5/DDR5) to ChromeOS.
CNVi Mode = 1
Wi-Fi Core = 1
BT Core = 1
BT Audio Offload = 0
BT Interface = 1
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I22575bf31b540f9dc1149a2766268285001b72f4
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib96fcb86fd2c3fe16f23c8f038f4930a832a5b01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I7eaf625e5acfcefdae7c81e186de36b42c06ee67
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
The patch disables Tccold Handshake to prevent possible display
flicker issue for skolas board. Please refer to Intel doc#723158
for more information.
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=Boot to OS on Skolas, verify upd setting.
Change-Id: Ic184a61c27abd729667cd181d8f9954f58b67856
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68636
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit provides a dev tree setting for partners to enable/disable
TccoldHandshake for the sighting in doc:723158
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=compile ok and FSP UPD is config properly
Change-Id: Ica13b98204acebef7f0b9a4411b4ac19f53cad6e
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68635
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Expose DisableDynamicTccoldHandshake in header so that
coreboot can disable it.
BUG=b:221461379
BRANCH=firmware-brya-14505.B
TEST=Boot to OS, check UPD value in debug FSP build.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I0d953f37a2f0dac58fd339e3fe0dc847d5e6d892
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72693
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some reserved address range listed in Alder Lake Platform Firmware
Architecture Specification document 626540 section 6.4 ADL - System
Memory Map such as North TraceHub ranges were missing. Details about
North TraceHub (aka. Intel TraceHub) can be found in Intel Trace
Hub (Intel TH) Developer's Manual document 671536.
BUG=b:264648959
TEST=Compilation successful
Change-Id: I14803a7297c8c5edefe564d92bfe7314f6769942
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds the {MCH:a706, TDP:28W} missing 28W configuration.
BUG=b:267666609
BRANCH=firmware-brya-14505.B
TEST=Power Limit are properly set on skolas 28W
Change-Id: Ice35d622eeec5799c53de086430d00dc8789097e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The testsoc script was pulling in odd results when the -K option matched
options in sources, Makefiles, and device trees. Adding another grep to
limit the list to just Kconfig matches ensures that only actual
mainboards are built.
TEST="./util/testsoc -K PICASSO" no longer tries to build mainboard "0"
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3860df4520a5594fb9c1a06e75487520b7d5d275
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72655
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ADL-N 15W CPU thermal settings.
BUG=b:265101768
TEST=emerge-nissa coreboot
Change-Id: I325704d6fc4ddaf56eaddd6a69bc619588df99cd
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71860
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Removed workaround since the latest schematics fixed.
Power Sequencing of ELAN6918 (in ACPI) after this patch
`POWER enabled -> RESET deasserted -> Report EN enabled`
BUG=b:247029304
TEST=Verified ELAN touch panel is working as expected after booting
Google/rex device to ChromeOS.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I19629262776f7e0cccbdebb2285890d177a8a8a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72725
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
If we show the user early signs of life during CSE FW sync or MRC
(re)training, log these to the eventLog (ELOG_TYPE_FW_EARLY_SOL).
These can be used to ensure persistence across global reset (e.g. after
CSE sync) so that they can be later retrieved in order to build things
such as test automation ensuring that we went through the SOL
path/display initialized.
BUG=b:264648959
TEST=event shows in eventlog after CSE sync and/or MRC
Change-Id: I8181370633a1ecff77b051d3110f593c3eb484a2
Signed-off-by: Tarun Tuli <taruntuli@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71295
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
In order to support logging events for when we show early signs
of life to the user during CSE FW syncs and MRC trainings add
support for the ELOG_TYPE_FW_EARLY_SOL type.
BUG=b:266113626
TEST=verify event shows in eventlog CSE sync/MRC training
Change-Id: I3913cb8501de9a2605266cf9988a7195576cb91d
Signed-off-by: Tarun Tuli <tarun.tuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71296
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add a new eventLog type of ELOG_TYPE_FW_EARLY_SOL to support logging
when we show early signs of life to the user.
BUG=b:266113626
TEST=event shows in eventlog after CSE sync and/or MRC
Change-Id: I3bd5a250c0be824dbbad0236cee7d61a1ffdbc6c
Signed-off-by: Tarun Tuli <tarun.tuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72670
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Intel SPR-SP (Sapphire Rapids Scalable Processor) was product launched
on Jan. 10, 2023.
Change-Id: I14cf115b02d8edff9b48e744b798a3b1ba18b8bf
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Create overridetree and GPIO config based on latest schematic:
1. Update PCIe ports
2. Update USB ports
3. Remove unused I2Cs
4. Remove unused peripherals (SD card, eDP, speakers)
5. Add LAN
6. Thermal policy for updated temp sensors
BUG=b:260934185, b:260934719
BRANCH=dedede
TEST=build
Change-Id: I4789be2eee1d01288031bc1e8ee5c9d6df71f9fe
Signed-off-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71882
Reviewed-by: Adam Mills <adamjmills@google.com>
Reviewed-by: Sam McNally <sammc@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Contents of the EDID are passed by a reference to an array
of length 0x80, for which the macro 'PTN_EDID_LEN' has already
been around.
This patch makes use of this macro within the driver and mainboard
implementation utilizing it.
BUG=none
TEST=A successful build of mc_apl{1,4,5,7} and mc_ehl3 mainboards.
Change-Id: If7d254aaf45d717133bb426bd08f8f9fe5c05962
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This is regarding issues observed on multiple Brya and Nissa
variant such as Skolas and Nivviks. Issue is that once coreboot
sets GPE_EN bit for the GPIO pin and locks it, kernel is not able
to change the control bit. Hence kernel is not able to control the
IRQ on the pin when required.
This issue was root caused to the patch which was setting GPE_EN
bits for the GPIOs before locking.
Ref: commit 38b8bf02d820
("intelblocks: Add function to program GPE_EN before GPIO locking")
This patch skips the locking for GPP_F14 to allow kernel to
configure it later during reboot or shutdown as required.
BUG=b:254064671
BRANCH=None
TEST=Shutdown works on Skolas and Brya board with the patch.
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: I7e4a6ac4668028bcd5fa400b9aa8eccf36a79620
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72648
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is an existing issue for skolas boards where board wakes up
from shutdown immediately due to touchpad wake signal.
This issue was root caused to the patch which was setting GPE_EN
bits for the GPIOs before locking.
Ref: commit 38b8bf02d820 ("intelblocks: Add function to program GPE_EN before GPIO locking")
Later issue was found to be with GPP_F14 configuration for skolas
boards. While shutting down, kernel is not able to disable IRQ for
touchpad due to GPE_EN register getting locked and it is preventing
shutdown of the board.
This patch skips the locking for GPP_F14 to allow kernel to
configure it later.
BUG=b:254064671
BRANCH=None
TEST=Shutdown works on Skolas board with the patch.
Nissa Bug: 234097956
Signed-off-by: Maulik Vaghela <maulikvaghela@google.com>
Change-Id: I09cf1af1f5ab11b06073755374ee8a306984d557
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72426
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Otherwise configurations in src/mainboard/ocp/tiogapass/Kconfig
cannot be selected by
make defconfig KBUILD_DEFCONFIG=configs/builder/config.ocp.tiogapass
Change-Id: I88d5619269a6a9c09e84061642206a17c91db042
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Neither TOP_MEM_MASK nor TOP_MEM_MASK_KB is used, so drop the two
definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0b2dfb7be27884dffb948876aabb73f99834c281
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
It is about AB recovery layout which only has level 2.
Change-Id: I836f11ca0bf5ad37e5093419465244a5c83318cb
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of directly accessing the region_name array use a helper
function. This allows to move the region name array to a separate
file.
Change-Id: Ifc810da1628cebd2728d0185502c462ff9428597
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add denverton soc chipset name.
Change-Id: I0fd8494123490d6ccc21af2ed30c30d50ddb4e8e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68693
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop unused chipsets that do not use an IFD.
Change-Id: I999e5e5d2063b8d33819fb22296ed486e1194cbb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change https://review.coreboot.org/c/coreboot/+/54305 "util/ifdtool:
Use -p platform name to detect IFDv2 platform and chipset" made
the '-p' argument mandatory for IFDv2 platforms.
Drop the IFDv2 platform CHIPSET_C620_SERIES_LEWISBURG from IFDv1
detection.
Change-Id: If29f8718b7aa696cdc07deef4c98be9a68c66f10
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68680
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Wellsburg is IFDv2 compatible in most fields, but not in all.
It only has 8 regions and the flash master bits match the defines for
IFDv1 and thus has an "IFDv1.5" descriptor.
Add a new enum for IFDv1.5 descriptor and use them to properly operate
on this IFD.
The 'SPI programming guide' is inconsistent and mentions 6 regions
in one place, but 7 regions in another chapter. Tests showed that it
actually supports 7 regions.
Add support using the -p argument to specify Wellsburg platform.
The previous patch made sure that only 8 regions are used and that no
corruption can happen when operating in IFDv2/IFDv1.5 mode.
Tested on Intel Grangeville.
Documents used:
Intel Document Id: 516552
Intel Document Id: 565117
Change-Id: I651730b05deb512478d059174cf8615547d2fde4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Co-developed-by: Julian Elischer <jrelis@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch enables S0i2.2 by letting 1.5V Phy supply to control the
externa FET.
BUG=b:256805904
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8771c11ce3b305343c7e96510e1375538d5e7f04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72709
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Use acpi_create_dmar_ds_ioapic_from_hw() to generate DMAR entries.
This can restore s3 resume capability for Sandy Bridge platforms lost
after commit d165357ec37c ("sb,soc/intel: Use
register_new_ioapic_gsi0()").
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I83e735707cd9ff30aa339443593239cd7e3e4656
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72513
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
USB1_DRV_VBUS is used to provide 5V power for USB on MT8188 EVB and it's
not used on Geralt. Therefore, remove the GPIO setting of USB1_DRV_VBUS.
TEST=read usb data successfully.
BUG=b:236331724
Change-Id: Iffea7b288c83c81648d4c7ca30d2f0961f9853ff
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72641
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With New Crypto upgrade we need to have 1 block of 4Kb increase in
romstage, by which we can see an improvement of Boot performance
by 100 msec.
BUG=b:218406702
TEST=Validated on qualcomm sc7280 development board
Boot performance improved by 100 msec observed.
Change-Id: I9f5c8a79993fc1c529fae5cea4c4182663643ddd
Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72646
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
During boot, gpi_firmware_load gets called twice because there are
2 serial engines. Thus gsi_fw blob is also decompressed twice and is
written to base addresses of SEs. This is redundant.
Perform the decompression once on first call and save the header
in static variable which can be reused in next call.
BUG=b:262426214
TEST=Validated on qualcomm sc7280 development board
Saving of 80ms observed while testing with 130 boot cycles.
Change-Id: If98a3974f0791dffdf675c02cc28375d0485c485
Signed-off-by: Vijaya Nivarthi <vnivarth@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71927
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Like Cezanne, Mendocino does not support warm resets. Change all resets
(including resets in the OS) to cold resets (like Cezanne).
BUG=b:248221908
TEST=Run suspend_stress_test, then reboot
Change-Id: I1fbb4cc6eb6e6de9616d00d0191ccf3c0ac55278
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72486
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I58faed286718f5eab714cd39001177e50feb4f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic42c67163fe42392952499293e91e35537cb9147
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarily share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I34d3c4a60653fe0c1766cd50c96b8d3fe63637d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The D-state list lists the devices with the corresponding
D-state that the devices should be in, in order to enter LPM.
DPTF is not mentioned in Intel's document 595644 as one of
the devices.
This CL removes it to avoid a potential error seen in ADL
devices as mentioned in commit 3fd5b0c4cdeb ("soc/intel/adl:
remove DPTF from D-states list used to enter LPM")
TEST=Built and tested on Rex, saw SSDT generated properly.
BUG=b:231582182
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I9192ed9a7fb59ebba14f6d5082b400534b16ca72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72603
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Windows DPTF drivers expect this method, and if not present appear
to hang. Adding this method fixes DPTF under Windows on drallion.
Modeled after existing method used by chrome-ec.
TEST=build/boot Win11 on google/drallion, verify DPTF functional.
Change-Id: I6570345379da413273251ecf5209c4997aac9b11
Original-patch-by: Coolstar <coolstarorganization@gmail.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
