aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-21Add macros for 64bit byte order swappingStefan Reinauer
Change-Id: Ic31ccd41ba3e0af7046eafc29221810d4cd196c8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/275 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-20T60: Add support for Ultrabay Legacy I/O devices (40Y8122)Sven Schnelle
Those modules have basically the same Super I/O capabilities as the Docking station. Unfortunately, the Super I/O in the module shares the same I/O address as the Docking station, so we're not allowed to connect the LPC Docking Bus if such a module is present. To be able to detect this device and use it as early console for coreboot, we have to initialize the GPIO Controller before, as this device is detected via GPIO06. Change-Id: If7c38bb6797f76cf28f09f3614ab9a33878571fb Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/282 Tested-by: build bot (Jenkins)
2011-10-20i82801dx: Replace romstage printk'sKyösti Mälkki
Patch is required to compile this with romcc. Change-Id: I5c4c0f5b32e5edeb8c48d8455b3493ca79f8b452 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/291 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19asrock/e350m1: Enable the superio ACPI device in devicetree.cbPeter Stuge
This makes the power_on_after_fail NVRAM option work correctly. Change-Id: I96f05f82d7f133b343cf8d4ef09db50a3db7a83d Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/292 Tested-by: build bot (Jenkins)
2011-10-19IOAPIC: fix bitmaskKyösti Mälkki
APIC ID is bits 27..24, not 19..16. Change-Id: Ib53a480bf4328901094ca2c4713e8317321962a1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/299 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19sconfig: check whether component directory actually existsStefan Reinauer
and add drivers/generic/generic back (empty), since it is used by many devicetree.cb files. Without this patch typos in component names in devicetree.cb cause the component to be silently ignored. Change-Id: I3cfca2725816f0cd7d72139ae53af815009e8ab4 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/270 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19Drop eh_frame instead of moving it into the image.Stefan Reinauer
That's what SeaBIOS does, too, and it works just fine. Change-Id: I3e17c15848aca86f775fc86f4ad906c820625887 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/269 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19I945: replace #if defined() by #ifSven Schnelle
config.h defines also unset config options (as "0") so #ifdef matches both settings, which isn't what we want. Change-Id: I694e1b8a8ec4c20225d7af1a13a2a336f900e643 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/293 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-18Append logical PME/GPIO device. Fix MPU device number.Kyösti Mälkki
A mainboard may require configuration of the superio pins to fully support some features. Things like A20# gate, leds, fans, infra-red and bootstrap jumpers may be configured and controlled through the logical PME device. Change-Id: I6e77ff0295806ba3dff339013f73d99c2961388f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/289 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-18Activate older Xeon P4 microcodesKyösti Mälkki
As new microcode files were included, the table was not updated with families 0f25 and 0f26. Change-Id: I5bb8be9d7c37eb8406dcb48a4b933eab24639bda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/290 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-17Fix our CMOS checksum algorithm so it matches what /dev/nvram expectsStefan Reinauer
Our cmos checksum is inverted to what the Linux /dev/nvram device expects (and BIOSes use). This makes it impossible to use /dev/nvram with coreboot. Fix it! Change-Id: I239f7e3aca05d3691aee16490dd801df2ccaefd1 Signed-off-by: Vadim Bendebury <vbendeb@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/279 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-17rework RTC driver output to make it more consistent.Stefan Reinauer
Also add a meaningful define (Not hooked up in Kconfig, that might or might not follow) Change-Id: I9cc4bca0d23d75e6a1d767932ec62e8c68b39d71 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/278 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-17cbfstool: improve error messagesStefan Reinauer
If a file can't be added by cbfstool, print the type and name of the file in the error message. Change-Id: I369d6f5be09ec53ee5beea2cfea65a80407f0ba3 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/271 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-17Re-worked devicetree.cb for DL145 G1Oskar Enoksson
After a lot of experimentation this commit improves some hardware features that were not recognized or incorrectly configured before. The only thing not tested is SCSI-option board (I dont have one). Misleading errors in comments have been corrected. (Note BTW that the DL145 G1 mainboard is identical to AMD Serenade which was supported in early versions of coreboot but was dropped for some reason.) Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: Ibbd97fafad22196b1e18d0b257731490339f113e Reviewed-on: http://review.coreboot.org/237 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-17Fixes several issues with amd k8 SSDT P-state generationOskar Enoksson
First issue fixed: For multi-socket CPU the current implementation emitted Processor objects for cores in the first CPU only. This commit fixes the bug by really emitting one Processor object for each core. However, the unlikely case of mixed CPU models is still not handled correctly. Second issue fixed: One loop was wrong in case a processor in the table declares no P-states at all. The rewritten loop is safe. Some possibly dangerous array lengths were also fixed. Third issue: on MP-boards the recommended ramp-voltage (RVO) is 0mV according to the BKDG. The current implementation always set it to 25mV. This commit selects 0 or 25mV depending on CONFIG_MAX_PHYSICAL_CPUS. Fourth issue: If a processor without PowerNow! support was inserted in a system with coreboot configured with SET_FIDVID then the boot process hanged mysteriously and very early. Apparently because init_fidvid_ap tampers with non-existing registers. This commit fixes the bug by bailing out from init_fidvid_ap if PowerNow! capability is missing. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: I61f6e2210b84ccba33a36c5efc866447b7134417 Reviewed-on: http://review.coreboot.org/239 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-15SMM: Move wbinvd after pmode jumpStefan Reinauer
According to Rudolf Marek putting a memory instruction between the CR0 write and the jmp in protected mode switching might hang the machine. Move it after the jmp. There might be a better solution for this, such as enabling the cache, as keeping it disabled does not prevent cache poisoning attacks, so there is no real point. However, Intel docs say that SMM code in ASEG is always running uncached, so we might want to consider running SMM out of TSEG instead, as well. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Id396acf3c8a79a9f1abcc557af6e0cce099955ec Reviewed-on: http://review.coreboot.org/283 Reviewed-by: Sven Schnelle <svens@stackframe.org> Tested-by: build bot (Jenkins)
2011-10-15use byteorder.h instead of implementing another byte swap functionStefan Reinauer
Change-Id: Id5fe7b597256ddf5d4ef408ec82cd94d84e7a0cd Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/277 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-15AMD CPU and chipset fixes for compilation with gcc 4.6Stefan Reinauer
Change-Id: I05b08765b38d8d6cc9b7cbdaf87c127b33408c81 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/266 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-15use acpi.h include instead of manually adding acpi_slp_type.Stefan Reinauer
Change-Id: I2a3aaf10e453fa6cce8a993356f2a0587178209a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/276 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-15cbfs_and_run_core() is not part of the API, make it static.Stefan Reinauer
It's only used in cbfs_and_run.c Change-Id: Ibcfcefbeb0c5722eb3888f0d60127229a2badcf6 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/273 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2011-10-15reformat Makefile.bootblock.inc (>80 lines per char)Stefan Reinauer
Change-Id: I0ff02fa72ff5a14d8c166686bb3d66fe1e887ea4 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/274 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-14Fix AMD SB800 (cimx) southbridge code to compile with gcc 4.6Stefan Reinauer
Change-Id: I672135a9b6e3b641ceb655cb00d40ee760c17edc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/268 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-14Fix compilation of AMD GX2 northbridge code with gcc 4.6Stefan Reinauer
Change-Id: I71d96b7cd36dd99a3590ec311c11f67f13012e68 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/267 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-14Fix compilation of VIA CN700 northbridge code with gcc 4.6Stefan Reinauer
Change-Id: Ia52d21c5c467ec08bc7b958ee1a8e37e7d3e025b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-14fix compilation of intel/sch northbridge code with gcc 4.6Stefan Reinauer
Change-Id: I57804dff9e37f0127900ebb7a67118382944eb89 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/264 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-14Add eh_frame to rom section to fix compilation of coreboot with gcc 4.6Stefan Reinauer
Change-Id: I347dd84a61244eed145c02a080309d5a34c5394a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/263 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-13Prevent build breakage without consoles enabledStefan Reinauer
If all console types are disabled, coreboot will fail to compile because static code is unused. This patch fixes the issue. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ie9c8bf2a78e3aeba4c2908b06bc03f0f5af37db2 Reviewed-on: http://review.coreboot.org/260 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Load an IDT with NULL limitStefan Reinauer
Load an IDT with NULL limit to prevent the 16bit IDT being used in protected mode before c_start.S sets up a 32bit IDT when entering ram stage. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I8d048c894c863ac4971fcef8f065be6b899e1d3e Reviewed-on: http://review.coreboot.org/259 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Fix compilation of x86emu with gcc 4.6.xStefan Reinauer
gcc 4.6 complains about unused but set variables in x86emu. Particularly some variables are always set but only used in debug mode, or when FPU support is enabled. Change-Id: Ic53bd2303171ab717eb2d2c0ed72744d3eb6989e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/258 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Fix native x86 option rom initializationStefan Reinauer
- Intel option roms want an initialized i8259 or they will throw an exception 6. This should be done in the southbridge code, but that is executed much later than the VGA init, so initialize the i8259 in src/devices/oprom/x86.c. In the long run this will allow getting rid of some of the ugly hacks in some AMD boards' romstage.c - Don't overwrite the mode when copying mode info information back from 0x600. Change-Id: Idb01f13dbcd736d8d830b222ffe1ea85799fcd9c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/257 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13refactor vesa mode setting code and bootsplash codeStefan Reinauer
- adds possibility to set a vesa mode without showing a bootsplash - make bootsplash / mode setting code available in real mode. Change-Id: I0045c9d75757657f4ce531889593102ea1e39ce5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/256 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Refactor option rom initialization code in coreboot.Stefan Reinauer
- move int15 handler out of the generic code into the mainboard directories of those mainboards that actually use it. - move vbe headers to vbe.h - move function prototypes used in native oprom code to x86.h Change-Id: Idfff5e804ea328f7b5feebac72497c97329320ee Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/255 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Enable/fix compilation of i8254 code in ram stage.Stefan Reinauer
Change-Id: I3bbe795d8e6e576be9e94d6cd888e78a116ddbbd Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/254 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Update "STABLE" SeaBIOS selection to release 1.6.3Stefan Reinauer
1.6.3 has a lot of benefits over the previous version, the two most important being: - working AHCI support - compiles with gcc 4.6.x Change-Id: Ie3a4d8f2624e0aa85e48ca09da53474c085838db Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/253 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Use default table creator macro for all SSDTsStefan Reinauer
Change-Id: I0c138ebfdc6d4d5ae7d3512b0dd68df20485690e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/262 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Fix romstage creation with gcc 4.6 and CAR targetsStefan Reinauer
newer gcc versions generate ".section .text" instead of just ".text" in their assembler output. This patch makes sure that we don't end up with a superfluous ".section" that makes the build fail. Add -Wno-unused-but-set-variable to CFLAGS if the flag exists. Change-Id: I7f24c987433cc5886dde2af27498d3331cbda303 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/252 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-13siemens/sitemp_g1p1: Don't mess with virtual wire settingsPatrick Georgi
That function broke SMP on Linux 2.4, now it works. Change-Id: I4ddd25fef57bed64877959ca96cca68170042bca Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/243 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13siemens/sitemp_g1p1: Get rid of bus_isa and bus_typePatrick Georgi
Each variable is essentially unused or incorrect. Change-Id: I4d2a10c9b45306ac6e6026a31765d3b912fd855c Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/242 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13amd/sb600: Enable COM2 at all times in early setupPatrick Georgi
Otherwise with a coreboot log on COM2 (which doesn't work) the boot process takes eons. Change-Id: I886f98b715c1f384c8693f2977671ff15897b5a5 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/241 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
The last couple of lines of every mptable function were mostly identical. Refactor into common code, a new function mptable_finalize. Coccinelle script: @@ identifier mc; @@ ( -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); | -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); ) Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/246 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor lintsrc generationPatrick Georgi
We copied pretty much the same code for generating mptable entries for local interrupts (with some notable exceptions). This change moves these lines into a generic function "mptable_lintsrc" and makes use of it in many places. The remaining uses of smp_write_lintsrc should be reviewed and replaced by mptable_lintsrc calls where possible, and smp_write_lintsrc made static. This patch was generated using Coccinelle: @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @m@ identifier mc; expression BUS; @@ -#define IO_LOCAL_INT(type, intr, apicid, pin) smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, BUS, (intr), (apicid), (pin)); ... -IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); -IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, BUS); Change-Id: I97421f820cd039f5fd753cb0da5c1cca68819bb4 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/244 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13Make Asus A8V-E SE better ACPI citizen.Rudolf Marek
Use the SSDT autogen infrastructure to support the automatic reserved resources, automatic P-state generation and automatic _CRS PCI0 method. Change-Id: Ic56a92eeb70a0a2a2d6de2507009ec3a832c83b3 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/251 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-12w83627hf: ASL include containing virtual device tree of the SuperIOChristoph Grenz
Add a ACPI Source Language snippet to superio/w83627hf which maps the SuperIO and most of the logical devices to PnP devices, exposing configuration options and chip power management to the OS. Written using the Winbond W83627HF/F datasheet. Change-Id: I1108d29b341ef78fe7f1e574f98b680aada39daf Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/223 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12amdk8: ASL include for K8 temperature sensor support in ACPIChristoph Grenz
Add a ACPI Source Language snippet which if included as shown in the comments in the file, exposes the 4 possible temperature sensors in the CPU as ACPI thermal zones. Change-Id: I94dd773108e348a0fdb9d2f8d6cfe415d5fa0339 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/222 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12SB800 RAID: add kconfig option RAID_MISC_ROM_POSITIONKerry Sheh
SB800 RAID ROM require to put the misc ROM to specific position, this patch enable user to put the RAID misc ROM to the right place in the coreboot image. Change-Id: I4fc64df8e091fb0cccd063826ab31a4f198942d1 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/249 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12SB800: Sata Enable bus master and enable ahci for AHCI/RAID modeKerry Sheh
In order to make sure AHCI/RAID ROM works correctly For SB800_SATA_AHCI or SB800_SATA_RAID mode, SATA should enable bus master and the ahci also should be enabled. Change-Id: I9d9c557816d364d8373fe343860ad5fe45988200 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/248 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12avalue/eax-785e: Get SATA Mode from Kconfig optionKerry Sheh
Change-Id: I67aab3ba7de85337e2cf83b6d1be63cb04bf0fcd Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/233 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12sb800: Add Kconfig option ENABLE_IDE_COMBINED_MODEKerry Sheh
Add this option to enable/disable SATA IDE Combined Mode feature Change-Id: I1ab8acd27947a71baf954f44d0741f81f48e5541 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/231 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-12persimmon: complete the sb800 devicetreeKerry Sheh
sb800 cimx entry sb_Before_Pci_Init was called in the device 16.2 enable_dev() function. If the devicetree don't have this device, then sb_Before_Pci_Init will not get called. So the missing sb800 USB3 devicees was add to the mainboard devicetree. Because of no physical usb connector connected to USB3, the USB3 device setting was off. Change-Id: If060ccb43df7fbe88bafc61e9e600a9120575437 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/232 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11Don't do a call as the first instruction in libpayload.Marc Jones
Doing a call before the payload has set up its stack is risky. The stack may not be in a favorable location. Normally this is not an issue with coreboot or other well behaved callers. Change-Id: Ie6f6748a471324b29ebad045c807dfc9f4b92034 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/240 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-11Fixed broken MTRR for >4GB memory on AMD K8 fam 0fh rev <=EOskar Enoksson
AMD K8 rev F and later implements a bit SYSCFG_MSR_TOM2WB to mark dram memory above 4GB as WB. However, AMD K8 rev E and earlier don't implement this bit and therefore need MTRR spanning dram memory above 4GB. The current implementation of amd_setup_mtrrs never generate MTRR above 4GB. This caused memory > 4GB not to be recognized in e.g. Linux on those rev E or older platforms. This commit should fix that bug. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: Ie568a52a8eb355969c86964d5afc4692e60f69c1 Reviewed-on: http://review.coreboot.org/238 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11mainboard: complete the sb800 devicetree even device is offKerry Sheh
sb800 cimx entry sb_Before_Pci_Init was called in the device 16.2 enable_dev() function. If the devicetree don't have this device, then sb_Before_Pci_Init will not get called. Change-Id: I76ebad842e90b0f740abbec031165d7c39a80abf Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/230 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11sb800: sata combine mode configure fixKerry Sheh
Using micro CIMX_OPTION_ENABLED/CIMX_OPTION_DISABLED to configure SataIdeCombinedMode is wrong. sbPowerOnInit() use SataIdeCombinedMode to determine whether hide the IDE controller 0: IDE controller is exposed and Combined Mode is enabled. SATA controller has control over Port0 through Port3, IDE controller has control over Port4 and Port5 1: IDE controller is hidden and Combined Mode is disabled, SATA controller has full control of all 6 Ports when operating in non-IDE mode Change-Id: I32e7101737f1dbfff49daa58670e6820b476b250 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/229 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11persimmon: sb800 sata mode configure updateKerry Sheh
persimmon configure sb800 sata mode according to the southbridge kconfig selection. Change-Id: I44a9c36ca68b4a0e1086f04c4338d3a5f536fdca Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/227 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11sb800: Add sata ahci/raid mode kconfig optionKerry Sheh
If sb800 sata was configured as ahci or raid mode, give the option to add ROM files. Change-Id: I87a7814930ce3a7c38cde1e235d151223eea2107 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/225 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-03pci_ids: Add sb800 SATA device raid mode device idKerry Sheh
sb800 SATA device have different device id with different configure mode, 4392h for RAID mode, 4393h for RAID5 mode Change-Id: If54f7751f531c94ee725309a2a5c255390935ead Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/226 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-03TINY_BOOTBLOCK problem-fix on amdk8+amd8111 platformsenok71
The hp/dl145_g1 motherboard did not work since commit 1f7d3c5672ec90f8d71907b1a07c8a87fa461047 (svn 6124). That commit added TINY_BOOTBLOCK for amd8111 southbridge. The result was that the boot process stopped very early (no console output whatsoever). The same symptom was reported on other AMDK8 based boards with amd8111 southbridge chips. This commit seems to fix the bug. It adds a bootblock.c under src/northbridge/amd/amdk8 that calls enumerate_ht_chains. Probably the problem was that enum_ht_chains needs to be called before the southbridge bootblock.c function, not after. Change-Id: I74fb892aa39048e2d0e76c081b713f825d67f2d4 Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/235 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-24Add AMD Family 10h PH-E0 supportQingPei Wang
the patch file comes from src/vendorcode/amd/agesa/f12/Proc/CPU/Family/0x10/RevE /F10MicrocodePatch010000bf.c Change-Id: If701c8a908edf1c486665d3ce4df65da0f65c802 Signed-off-by: QingPei Wang <wangqingpei@gmail.com> Reviewed-on: http://review.coreboot.org/202 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-24mkelfImage: Use -fno-stack-protector if supported by gccRaymond Danks
Gcc 4.1 comes with an SSP https://wiki.ubuntu.com/GccSsp This is disabled to work around '__stack_chk_fail' symbol not found failures http://www.coreboot.org/FAQ/Obsolete#How_do_I_fix_stack_chk_fail_errors.3F The presence of -fno-stack-protector is tested for automatically by configure. Change-Id: I28ef158829f5935f985cfd5a5440733685cf479a Reported-by: Raymond Danks <raymonddanks@gmail.com> Signed-off-by: Raymond Danks <raymonddanks@gmail.com> Reviewed-on: http://review.coreboot.org/112 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-21Use ACPI text fields consistently with all other boardsStefan Reinauer
LXBIOS and LXB-DSDT are not used in other parts of the tree. Make names consistent across the tree. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I91caeac09fd2401a36e53bd061d249b236a48e43 Reviewed-on: http://review.coreboot.org/224 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-17Persimmon doesn't have HDMI so the GNB HD Audio should be disabled.Marc Jones
Change-Id: Ic960fe09fbed2c8a31c7c9ac2c54f6c88efebed3 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/219 Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com> Tested-by: build bot (Jenkins)
2011-09-17Enable SATA AHCI for faster boot with SeaBIOS.Marc Jones
Change-Id: Ibd87422680350c112eabe1bb73b237031c3e9d6b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/220 Tested-by: build bot (Jenkins) Reviewed-by: Frank Vibrans III <frank.vibrans@amd.com>
2011-09-16Persimmon updates for AMD F14 rev C0efdesign98
These are the changes for the AMD Persimmon mainboard required to support the update of the AMD Family 14 cpu to rev C0. There are many warning fixes; the agesa- wrapper.c file has been changed to fix the amdinitlate and amdlaterunaptask routines, and more. Change-Id: I6de43379a2819cea5169db5f21d4841f9a4942a7 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/137 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15Build warning fix for AMD Family 12efdesign98
This trivial change adds a prototype to an existing header file to fix a build warning for the AMD family 12 cpus. Change-Id: Ic666bfbef867d17607eaa0f59570aea987a31f93 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/218 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD Inagua platform updatesefdesign98
These changes update the Inagua platform. The changes include modifying the Kconfig to suggest video bios and ahci rom implementations, changing the dimm spd code to use the correct bus addresses, cleaning up the makefile a bit, and fixing a duplicate definition warning associated with the BIOS_SIZE value. Change-Id: Idab88dda48f08877dbbd2de3136bdf0e54e31247 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/136 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD Torpedo platform updatesefdesign98
This update fixes warnings and supports as necessary the Agesa infrastructure changes required to support the AMD Family 14 cpu update to rev C0. Change-Id: Ib08b49695b925b81f796bf299141fe6f845fdef8 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/138 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD Agesa macro expansion fixefdesign98
This change fixes the use of a macro that was previously modified to fix a warning. The macro was used in a manner that doubly incremented a pointer. The pointer increment was removed from the macro call and moved elsewhere. In addition, an unused macro was removed from both Family 12 and Family 14 code. Change-Id: I577794bbc55d18f21170dda1d0bbdc6d776ce392 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/217 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-15AMD SB800 early console use fixefdesign98
This change removes printk's that occur before console init is called. In the best case, these would cause an extremely slow boot, and in the worst case would cause a complete post failure. Change-Id: I50388e71225e95db602aa45835c39126c1c920a3 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/216 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-15AMD Agesa changes to fix F14 boot issuesefdesign98
This collection of changes fixes a buffer addressing issue by removing one level of indirection, fixes an Agesa HT mailbox retrieval bug, and fixes a buffer location-by-signature issue. Change-Id: Ic8a8cb3f9abddd9ad59343a85dbbee5aa7633be3 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/215 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2011-09-14AMD F14 Northbridge updatesefdesign98
This change is warning and whitespace fixes in the northbridge code for AMD Family 14 rev C0 cpu update. This does not address warnings in the mainboard, Agesa, Cimx, or southbridge code. Change-Id: I7ee7018a292ebb2343c9b7986dd21227185879dc Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/134 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14Update to Asrock E350m1 for AMD F14 C0efdesign98
This updates the E350m1 Agesa wrapper code to fix an issue with AmdLateRunApTask. It now passes the function parameter through to the Agesa routine. There is also a change to the platform_cfg.h file that makes the definition of BIOS_SIZE dependent on whether or not it was defined earlier. Change-Id: I19942c7d3ecd229a13ef0a69fa7e5b1ea0b909bf Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/139 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14mainboard: add avalue/eax-785 ITX mainboardKerry She
It's AM3 Socket, 880M + SB850 chipset, similar with advansus/a785e-i. Onboard device UART, VGA, SATA, PCI Slot, 2 X16 PCIe slot, 4 X1 Pcie slot, Lan, audio, PS2 keyboard/mouse and USB are verified. Change-Id: I483363f5ff9fbfc5cda2f0521660751212f3e326 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/208 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14rs780: hide unused gfx ports and gpp portsKerry Sheh
Hide the unused gfx ports and gpp ports if they are not configured as hotplug. lspci -vvv will get more accurate information under Linux, tested on avalue/eax-785e. Change-Id: Iaabfd362a0a01f21d0f49aa2bd2d26f9259013fb Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/206 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-14Provide mechanism to local additions to the buildPatrick Georgi
site-local/ is an optional directory for local additions to the build. If site-local/Makefile.inc exists it will be parsed and used. Use it to define VGA option roms, splash screens, extra rules to the tree... Change-Id: I0c6ee43ffa40e6c3f193db081ab551ab75bc7478 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/212 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14superiotool: Don't compile with -WerrorMathias Krause
Older libpci version have headers using 'long long' which isn't allowed in ANSI C. Since we cannot control the libpci version installed in the system nor in generall have complete control over system headers, simply skip using -Werror in our makefile. Change-Id: Ibc1e57bef033bf4971f4108d078222dcf168d5e3 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/210 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14inteltool: fixed 64 bit buildMathias Krause
The inline assembly for cpuid() was 32 bit specific. Additionally a format string referencing a size_t argument wasn't using the %z length modifier. Change-Id: Iac4a4d5ca81f9bf67bb7b8772013bf6c289e4301 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/211 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14inteltool: Fixed building of position independent executablesMathias Krause
When building a position independent executable (PIE) EBX is used internally by the compiler to generate position independent address references so it cannot be used in the clobber list. Use the already existing code for the Darwin plattform for that case, too -- it'll preserve the EBX value. Change-Id: Ief6d4872b8cd990856a0e8227a88bb228782aced Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/209 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14libpayload: Add get_option_from()Patrick Georgi
This function allows reading the nvram configuration table from locations other than the cbtable. Change-Id: I56c9973a9ea45ad7bf0185b70d11c9ce5d0e0e1b Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/213 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14Add IT8721F supportQingPei Wang
only the serial port is tested, keyboard/mouse are gonna to be tested later, it may also need some more patches to make it work completely. Change-Id: Ie9464d01c5d5760ebc800b3cd15a4ab2bad2e09f Signed-off-by: QingPei Wang <wangqingpei@gmail.com> Reviewed-on: http://review.coreboot.org/204 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14util/crossgcc: Update gdb to 7.3.1Peter Stuge
The previous version is no longer available. Change-Id: I8126617cfe9addeb4778f002398abbcb4c73d2c7 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/214 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2011-09-12inteltool: added more device IDsRuud Schramp
Change-Id: I6f2272ae4071025e671638e83bade6a96aac658b Signed-off-by: Ruud Schramp <schramp@holmes.nl> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/185 Tested-by: build bot (Jenkins)
2011-09-12Add acpi_get_sleep_type() to i82371eb and P2B _PTS/_WAK methodsTobias Diedrich
Build fix for src/arch/i386/boot/acpi.c if !CONFIG_SMP Also check for acpi_slp_type 2 in acpi_is_wakeup, since S2 uses the same acpi wakeup vector as S3. Add _PTS/_WAK methods to turn off/on the CPU/case fans and blink the power LED while sleeping. acpi_get_sleep_type() is in a seperate file i82371eb_wakeup.c because it is used in both romstage and ramstage after patch 3/3, whereas i82371eb_early_pm.c is used only in romstage. I used the name acpi_get_sleep_type instead of acpi_is_wakeup_early because I think acpi_is_wakeup_early is a bit misleading as a name since it doesn't return a boolean value. Other chipsets so far only ever set acpi_slp_type to 0 and 3, so the added check for acpi_slp_type == 2 (resume from S2) should not change behaviour of other boards: northbridge/intel/i945/northbridge.c:256:extern u8 acpi_slp_type; northbridge/intel/i945/northbridge.c:263: acpi_slp_type=0; northbridge/intel/i945/northbridge.c:267: acpi_slp_type=3; northbridge/intel/i945/northbridge.c:271: acpi_slp_type=0; southbridge/intel/i82801gx/i82801gx_lpc.c:171:extern u8 acpi_slp_type; southbridge/via/vt8237r/vt8237r_lpc.c:149:extern u8 acpi_slp_type; southbridge/via/vt8237r/vt8237r_lpc.c:238: acpi_slp_type = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0 ; southbridge/via/vt8237r/vt8237r_lpc.c:239: printk(BIOS_DEBUG, "SLP_TYP type was %x %x\n", tmp, acpi_slp_type); Change-Id: I13feff0b8f49aa988e5467cdbef02981f0a6be8a Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/188 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-12Miscellaneous AMD F14 warning fixesefdesign98
This commit adds in some more fixes to AMD F14 compile warnings. The change in the mtrr.c file is in prep- aration for changes yet to com, but it is currently innocuous. Change-Id: I6b204fe0af16a97d982f46f0dfeaccc4b8eb883e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/133 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-09Replace while with do; while to avoid repetitionNoe Rubinstein
Cosmetic only; replaces some 'while' loops with 'do; while' loops to avoid repetition. Replacement performed by the Ruby expression: t.gsub!(/^(\s*)([^\n\{]+)\n\1(while[^\n\{;]+)\n\s*\2/, "\\1do \\2\n\\1\\3;") Change-Id: Ie0a4fa622df881edeaab08f59bb888a903b864fd Signed-off-by: Noe Rubinstein <nrubinstein@proformatique.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/183 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-09Crank up CPU speed on Intel Core and Core2 CPUsPatrick Georgi
The CPUs start on their slowest speed, and were left that way by coreboot. This change will speed up coreboot a bit, as well as systems that don't change the clock for whatever reason. Change-Id: Ia6225eea97299a473cf50eccc6c5e7de830b1ddc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/176 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-09Report GSE chipset and warn if the code has been compiled for the wrong chipset.Stefan Reinauer
It would be nicer to unify the code so that it does all detection at runtime instead of compile time (but that would also significantly increase code size) so if someone else wants to give it a shot... Change-Id: Idc67bdf7a6ff2b78dc8fc67a0da5ae7a4c0a3bf0 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/184 Tested-by: build bot (Jenkins)
2011-09-07Add support utils for tracingRudolf Marek
Following patch adds a userspace util genprof which is able to convert the console printed traces to gmon.out file used by gprof & friends. The log2dress will replace the adresses in logfile with a line numbers. Change-Id: I9f716f3ff2522a24fbc844a1dd5e32ef49b540c5 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/179 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07Add support for the tracing infastructure in coreboot.Rudolf Marek
The compiler is forced to emmit special functions on every entry/exit of the function. Add a compile time option to support it. Function entries will be printed in the console. The CONFIG_TRACE has more documentation. Patch for userspace tools will follow. Change-Id: I2cbeb3f104892b034c8756f86ed05bf71187c3f3 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/178 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 Rev C0 updateKerry She
Add AMD Family14 Rev C0 cpu id Change-Id: Iacd1c7b20e889da61a2085188766285f27e5c018 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/160 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD SB800 southbridge updateKerry She
This patch enables access to the registers of the hardware monitor logical device in the superio via isa ports 0x295/0x296. Previously this was not enabled in the SB8xx LPC device. This is required for initialisation in init_hwm() in src/superio/winbond/w83627hf/superio.c and also by OS-level sensor monitoring such as lm-sensors to access temperature, fan monitoring and control and voltage registers. asrock/e350m1 and advansus/a785e-i mainboard changes are included herein. Change-Id: I2176885549277b335c0c41b48457d09b9b76b703 Signed-off-by: Per Hansen <perh52@runbox.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/159 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 southbridge updateKerry She
This change adds the southbridge related code to support the update of the AMD Family14 cpus to the rec C0 level. Some of the changes reside in mainboard folders but they reference changed files in the southbridge folder so they are included herein. Change-Id: Ib7786f9f697eaf0bf8abd9140c4dd0c42927ec7e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/135 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-04Adjust some code/comment of sb700 sata initWang Qing Pei
The inline comment of sata_init function seems not placed correctly. Rearrange it. Change-Id: I63480da60e51cdc68e64c302ad2d8a6197e288f6 Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/186 Tested-by: build bot (Jenkins)
2011-09-04Disable dev3 on ma78gm-us2hWang Qing Pei
Disable bus 0 dev 3 PCI bridge, ma78gm-us2h does not have this slot. Change-Id: Ia355ee385fd0f37793b4bdf1815c033670823eaa Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/187 Tested-by: build bot (Jenkins)
2011-08-29buildgcc: Do not download GDB source code if run with --skip-gdbPeter Stuge
Change-Id: Ida3680418fdd3136752d51cc19f3e14111c12131 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/175 Tested-by: build bot (Jenkins)
2011-08-27Add a few more patterns to .gitignoreSven Schnelle
Change-Id: If7c1c6d9a96dd788bacee72b6e18a435069cad6e Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/172 Tested-by: build bot (Jenkins)
2011-08-27Add dirty flag to git describeSven Schnelle
git describe knows --dirty, which adds -dirty to the verion number if the tree contains uncommited changes. We should add this flag to make it obvious that the COREBOOT_VERSION might be misleading. This is especially important as this version number is now used in the SMBIOS data structures. Change-Id: If4c608c7455e1bbf0cc530c6299fa00eb0fe4d58 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/173 Tested-by: build bot (Jenkins)
2011-08-26X60/T60: remove obsolete dmi.hSven Schnelle
Change-Id: Id0e8bcc1b93a629f0620b84a060d7ff99a82de78 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/174 Tested-by: build bot (Jenkins)
2011-08-26Add automatic SMBIOS table generationSven Schnelle
Change-Id: I0ae16dda8969638a8f70fe1d2e29e992aef3a834 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/152 Tested-by: build bot (Jenkins)
2011-08-25Minor ma785gmt clean-upAlec Ari
Change-Id: I9e889a6c475fb3283fa11f8b3de5baaf54235589 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/167 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-31 22:05:21 +0000