Age | Commit message (Expand) | Author |
2015-04-13 | ryu: Add and select DO_DSI_INIT config option | Jimmy Zhang |
2015-04-13 | ryu: display: Move display api to mainboard | Jimmy Zhang |
2015-04-13 | ryu: display: Split dc functions from dsi display code | Jimmy Zhang |
2015-04-13 | ryu: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctly | Tom Warren |
2015-04-13 | rush: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctly | Tom Warren |
2015-04-13 | rk3288: Increase the delay after DDR reset de-assert to 10us. | Dailunxue |
2015-04-13 | t132: Add I2S1 support to funit | Tom Warren |
2015-04-13 | rush: Add gpio config for PWR button and LID open switch | Jimmy Zhang |
2015-04-13 | nyan/rush/veyron: Align ChromeOS GPIOs to new model | Julius Werner |
2015-04-13 | Fix dependency issue in Chrome OS vendor code | Stefan Reinauer |
2015-04-13 | spi: support controllers with limited transfer size capabilities | Vadim Bendebury |
2015-04-13 | broadwell: Fix incorrect SATA port map mask | Wenkai Du |
2015-04-13 | tpm: wait for valid bit to be set in TPM access register before using tpm | Sourabh Banerjee |
2015-04-13 | vboot: remove vboot_handoff.h from chromeos.h | Daisuke Nojiri |
2015-04-13 | vboot2: Fill vboot1 handoff with correct TPM firmware version | Julius Werner |
2015-04-13 | The vboot_reference fwlib2 target has changed to fwlib20 | Bill Richardson |
2015-04-13 | chromeos: add get_recovery_mode_from_vbnv() to vbnv_flash | David Hendricks |
2015-04-13 | chromeos: Reverse FMAP signature constant to avoid having it in .rodata | Julius Werner |
2015-04-13 | vbnv flash: use proper SPI flash offset for NVRAM | Vadim Bendebury |
2015-04-13 | chromeos: Move common VBNV offsets to a header | David Hendricks |
2015-04-13 | vboot1: Set BEFORE_OPROM_LOAD flag for VbInit() | Duncan Laurie |
2015-04-13 | elog: Fix regression that caused elog to omit "System boot" event | Julius Werner |
2015-04-13 | elog: Correct behavior when FMAP section doesn't exist on ChromeOS | Julius Werner |
2015-04-13 | urara: add support for DMA coherent memory area | Ionela Voinescu |
2015-04-13 | t132: add RAM repair to cluster 1 | Yen Lin |
2015-04-13 | vboot1: Fix compilation error with CONFIG_ARCH_ROMSTAGE_ARM64 enabled | Yidi Lin |
2015-04-13 | broadwell: Enable double self refresh by default | Duncan Laurie |
2015-04-13 | pistachio: increase the size of romstage to 36K | Ionela Voinescu |
2015-04-13 | vboot2: use offset to vboot2 work buffer instead of absolute address | Daisuke Nojiri |
2015-04-13 | arch: armv7: Fix cache sync instructions. | Deepa Dinamani |
2015-04-11 | hp/pavilion_m6_1035dx/cmos.layout: Remove unused options | Alexandru Gagniuc |
2015-04-10 | fmap: allocate memory as much as discovered fmap size | Daisuke Nojiri |
2015-04-10 | rk3288: reset edp after edp clock source select | huang lin |
2015-04-10 | Add google/veyron_mighty board | Katie Roberts-Hoffman |
2015-04-10 | rockchip: support display | huang lin |
2015-04-10 | veyron*: select VIRTUAL_DEV_SWITCH | David Hendricks |
2015-04-10 | veyron: Adapt to new board revisions | Julius Werner |
2015-04-10 | veyron_jerry: Port CPU overshoot prevention | Julius Werner |
2015-04-10 | veyron*: sdram_get_ram_code() -> ram_code() | David Hendricks |
2015-04-10 | veyron*: use gpio_base2_value() in board_id() | David Hendricks |
2015-04-10 | veyron: Change VCC10_LCD_PWREN_H to allowed maximum of 2.5V | Julius Werner |
2015-04-10 | veyron_jerry: Remove board ID based assumptions | Julius Werner |
2015-04-10 | veyron: Change eMMC enable pin to be pulled (not driven) high | Doug Anderson |
2015-04-10 | Add google/veyron_jerry board | Katie Roberts-Hoffman |
2015-04-10 | storm: copy WiFi calibration data in the CBMEM | Vadim Bendebury |
2015-04-10 | tegra132: psci: add cpu_on/off support | Joseph Lo |
2015-04-10 | arm64: No need of invalidating cache line for secondary CPU stack | Furquan Shaikh |
2015-04-10 | arm64: Add support for save/restore registers for CPU startup. | Furquan Shaikh |
2015-04-10 | arm64: Add macro to invalidate stage 1 TLB entries at current EL | Furquan Shaikh |
2015-04-10 | arm64: Add conditional read/write from/to EL3 assembly macros. | Furquan Shaikh |
2015-04-10 | arm64: Add function for reading TCR register at current EL | Furquan Shaikh |
2015-04-10 | tegra132: Make non-vboot2 memlayout more useful | Furquan Shaikh |
2015-04-10 | tegra132: Change memlayout to have PRERAM and POSTRAM CBFS Cache | Furquan Shaikh |
2015-04-10 | tegra132: Bump up ramstage to 256K | Furquan Shaikh |
2015-04-10 | google/rush_ryu: Add speaker amp config for AD4567 on P0/P1 | Tom Warren |
2015-04-10 | tegra132: prepare cpu startup in psci | Aaron Durbin |
2015-04-10 | arm64: psci: actually inform SoC layer of CPU_ON entry | Aaron Durbin |
2015-04-10 | google/rush_ryu: Remove long delay when turning on AVDD_DSI_CSI | Jimmy Zhang |
2015-04-10 | tegra132: Increase size of bootblock due to overflow | Tom Warren |
2015-04-10 | arm64: ensure secondary CPU's stack tops are not in the cache | Aaron Durbin |
2015-04-10 | arm64: add timeout waiting for CPUs to come online | Aaron Durbin |
2015-04-10 | tegra132: always bring up PLLD | Aaron Durbin |
2015-04-10 | tegra132: rename clock_display() to clock_configure_plld() | Aaron Durbin |
2015-04-10 | google/rush_ryu: audio: Setup clocks for AHUB, I2S1, codec, etc. | Tom Warren |
2015-04-10 | tegra132: Set dc to resize the difference between framebuffer and panel | Jimmy Zhang |
2015-04-10 | google/rush_ryu: devicetree: Add framebuffer resolution settings | Jimmy Zhang |
2015-04-10 | tegra132: Add framebuffer parameters | Jimmy Zhang |
2015-04-10 | tegra132: Pass panel spec to lib_sysinfo | Jimmy Zhang |
2015-04-10 | tegra132: Expand ramstage size to 208k (from 192k) | Jimmy Zhang |
2015-04-10 | tegra132: Add dsi driver | Jimmy Zhang |
2015-04-10 | google/rush_ryu: devicetree: Add dsi panel mode settings | Jimmy Zhang |
2015-04-10 | tegra132: Add panel mode spec | Jimmy Zhang |
2015-04-10 | google/rush_ryu: dsi: Enable panel related vdd and clocks | Jimmy Zhang |
2015-04-10 | google/rush_ryu: Disable EC SW sync for proto boards before proto3 | Furquan Shaikh |
2015-04-10 | tegra132: Increase space for romstage in memlayout | Furquan Shaikh |
2015-04-10 | urara: support building with CHROMEOS enabled | Vadim Bendebury |
2015-04-10 | baytrail: correct NC pin to GPO pin according to BYT platform design guide | Kane Chen |
2015-04-10 | samus: Log EC panics to eventlog | Shawn Nematbakhsh |
2015-04-10 | cros_ec: Retry failed VBNV transactions | Julius Werner |
2015-04-10 | samus: Enable vr_slow_ramp | Shawn Nematbakhsh |
2015-04-10 | x86: Support reset routines in bootblock | Lee Leahy |
2015-04-10 | broadwell: Correct XHCI offset for USB 3.0 ports | Julius Werner |
2015-04-10 | broadwell: Set PCIe replay timeout to 0xD | Duncan Laurie |
2015-04-10 | samus: Use codec internal 1.8V as DACREF source | Ben Zhang |
2015-04-10 | samus: Set MICBIAS1 to 2.970V | Ben Zhang |
2015-04-10 | baytrail: add code for supporting 2x ddr refresh rate | Kane Chen |
2015-04-10 | broadwell: Add configuration for tuning VR for C-state operations | Duncan Laurie |
2015-04-10 | samus: Adjust SATA Gen3 TX voltage amplitude | Duncan Laurie |
2015-04-10 | broadwell: Preserve VbNv around cmos_init | Duncan Laurie |
2015-04-10 | broadwell: Add function to apply PRR to a range of SPI flash | Duncan Laurie |
2015-04-10 | samus: Add clear_recovery_mode_switch function | Duncan Laurie |
2015-04-10 | samus: Set current backlight PWM value | Duncan Laurie |
2015-04-10 | broadwell: Turn off panel backlight in S5 SMI handler | Duncan Laurie |
2015-04-10 | broadwell: Skip steps when disabling PCIe port | Duncan Laurie |
2015-04-10 | broadwell: Remove XHCI workarounds on WPT | Duncan Laurie |
2015-04-10 | broadwell: Only do pre-graphics delay when running option rom | Duncan Laurie |
2015-04-10 | PCI - Add interrupt disable bit definition | Lee Leahy |
2015-04-10 | samus: Add ACPI binding for rt5677 codec SPI | Ben Zhang |
2015-04-10 | broadwell: Fix PCIe ports programming sequences to enable HSIOPC | Wenkai Du |
2015-04-10 | samus: Add RT5677 ACPI/DT bindings with _DSD | Duncan Laurie |