summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-06-29amd southbirdge sb800 wrapper, pci bridge fixKerry She
sb800 pci bridge SHOULD enabled by default according to the chipset document, but actually not enabled on some mainboard. enable sb800 pci bridge when told to enable in devicetree.cb. tested on ibase persimmon mainboard. Change-Id: I42075907b4a003b2e58e5b19635a2e1b3fe094c3 Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/63 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Add the AMD Torpedo mainboardefdesign98
The Torpedo mainboard is the reference platform for the AMD Family 12 cpus and the AMD Hudson-2 (SB900) southbridge. Change-Id: Ifbf82fc4e4375a108a9d6068876b8ff612cfa8e1 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/54 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
This change adds the wrapper code for the AMD Family12 cpus and the AMD Hudson-2 (SB900) southbridge to the cpu, northbridge and southbridge folders respectively. Change-Id: I22b6efe0017d0af03eaa36a1db1615e5f38da06c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/53 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28msrtool: added support for Intel CPUsAnton Kochkov
Change-Id: I05f54471665aa99335a88d097c6de20174f91dc6 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/50 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28SMM: add guard and include types.h in cpu/x86/smm.hSven Schnelle
Change-Id: I002845cf7a37cd6885456131826ae0ba681823ef Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/64 Tested-by: build bot (Jenkins)
2011-06-28X60: remove pci config register save/restoreSven Schnelle
SMM code already makes sure this register is saved and restored, so we don't have to do it. Change-Id: I078e1227de4436fba9c5fb3879a564c981cb0f9a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/65 Tested-by: build bot (Jenkins)
2011-06-23Add SMSC SCH3114 superio register descriptions to superiotool.Mark Norman
This has been tested on a Aaeon PFM-540I RevB PC104 SBC. Change-Id: Ie02875a1fa2d90d7cc843ce745f727312f7b7aec Signed-off-by: Mark Norman <mpnorman@gmail.com> Reviewed-on: http://review.coreboot.org/43 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-23T60: undock on external power lossSven Schnelle
If power is unplugged/lost, we should undock the docking station. The power loss can also be caused by the fact that the user removed the thinkpad from the docking station without pressing the Undock button/hotkey first. Without undocking it on this event, the thinkpad LPC switch will still connect the Docking connector, which causes crashes when docking it again. Change-Id: I9ed783e491827bde20264868eab2b3a79c232922 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/62 Tested-by: build bot (Jenkins)
2011-06-23T60: enable userspace EC eventsSven Schnelle
EC events 0x50-0x5f are never triggered by the EC. Instead they can be generated by writing the wanted events to register 0x2a. Change-Id: Ifd7ce991ee094cb16e8425ed670b6b45cffe3907 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/61 Tested-by: build bot (Jenkins)
2011-06-23T60: add additional EC eventsSven Schnelle
We missed a few bits, i.e the battery and some hotkey events. Change-Id: Ia5561532f421eb3b40225301f0af639112abc3cc Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/60 Tested-by: build bot (Jenkins)
2011-06-23Add ThinkPad modelsSven Schnelle
Change-Id: I4f1a5d99486929eb0be76a0ab3bf0158a23c7d36 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/59 Tested-by: build bot (Jenkins)
2011-06-23T60: add missing License HeaderSven Schnelle
Change-Id: I03636deac7b6d8e01654cf978b1aac79cba10641 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/58 Tested-by: build bot (Jenkins)
2011-06-22X60: add missing License HeaderSven Schnelle
Change-Id: I9d6e80a633990e86dd3adfa2a761d09f62978349 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/57 Tested-by: build bot (Jenkins)
2011-06-22H8: add missing License HeaderSven Schnelle
Change-Id: If472e1e8bb93d64cc52a9084ad33fb9abbf0fb33 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/56 Tested-by: build bot (Jenkins)
2011-06-22PMH7: add missing License HeaderSven Schnelle
Change-Id: I3468689408fce05142a0959d5d725bdbd03faea7 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/55 Tested-by: build bot (Jenkins)
2011-06-22Move SB800 clock init earlierScott Duplichan
Committing Scott's e350m1 changes (svn r6585): Move SB800 clock init earlier, Fixes problem where initial serial port output is garbled. Change-Id: If05aa37726b962e8994ee69bf1882fcfae56aa19 Signed-off-by: Scott Duplichan <scott@notabs.org> Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/32 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Add the coreboot config to CBFSCristian Măgherușan-Stanciu
The CBFS will contain a new file, named 'config' of type 'raw' that is a stripped-down version of the .config file that was used to build the current coreboot image. For space savings, all the comments and empty lines were removed from the original config, except for one that lists the coreboot git revision that's built into the image. This is done in order to easily reproduce the work of someone else when only having their ROM image. In theory the reproduce could even be automated by a new dedicated make target. This should work even with abuild now. Change-Id: I784989aac0227d3679d30314b06dadaec402749e Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/46 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Move existing AMD Ffamily14 code to f14 folderefdesign98
This change moves the AMD Family14 cpu Agesa code to the vendorcode/amd/agesa/f14 folder to complete the transition to the family oriented folder structure. Change-Id: I211e80ee04574cc713f38b4cc1b767dbb2bfaa59 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/52 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-21Add AMD SB900 CIMx codeefdesign98
This code is added to support the AMD SB900 southbridge. Change-Id: I7dc5e13a53ffd479dcea4e05e8c8631096e2ba91 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/41 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-21Add AMD Family 12 cpu Agesa codeefdesign98
This is the addition of the AMD Family 12 cpu code. Change-Id: I3febc81e192b4e86bbd3e8d6e1da62a28598fa8c Signed-off-by: Frank Vibrans<frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/40 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-20sb800: move spi prefetch and fast read mode to sb bootblock.Stefan Reinauer
So we don't waste time on the first cbfs scan. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> [adapt persimmon with the same change, and work around romcc bug in bootblock code: it doesn't like MEMACCESS[idx] |= value;] Change-Id: Ic4d0e53d3102be0de0bd18b1b8b29c500bd6d997 Reviewed-on: http://review.coreboot.org/9 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-20Introduced support for 8MB and 16MB flash sizesCristian Măgherușan-Stanciu
Change-Id: I217ff84be3575ec09781710f19ad272c88227663 Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/49 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-20ASRock E350M1: Enable USB3 supportMarshall Buschman
Requires Scott Duplichan's patch for NIC support. Enables required PCIe port for USB3 - does not interfere with normal operations on non-USB3 model. Change-Id: I451bb1b4f799d6485e75fa949933e25e821b65f9 Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/45 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-19ASRock E350M1: Configure SB800 GPP ports to support onboard pcie nicScott Duplichan
Scott Duplichan's patch from the mailing list: sb800 cimx wrapper: Run the complete sb800 cimx sbBeforePciInit() function once, after determining device 0x15 function enables. 1) Update the asrock e350m1 devicetree.cb to match the hardware. 2) Change the way the sb800 cimx wrapper code works. The original cimx code calls sb800 cimx function sbBeforePciInit() once. When ported to coreboot, the gpp component of this function was called once for each gpp port, as the gpp port's enable/disable state became known. A 05/15/2011 change makes the early gpp code run only once, triggered by processing the 4th gpp port. This method is not general enough because the 4th gpp port is not enabled on all boards. With the current change, the early gpp code runs when the first gpp port is processed. If any gpp ports are enabled, the first must be enabled. Tested with Win7 and linux on asrock e350m1. This change will also affect amd inagua, and has not been tested on that board. Change-Id: I93d44c216bfcab3c3a8fbb79d23dab43a65850e6 Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/44 Tested-by: build bot (Jenkins) Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2011-06-18SMM: flush caches after disabling cachingSven Schnelle
Fixes spurious SMI crashes i've seen, and ACPI/SMM interaction. For reference, the mail i've sent to ML with the bugreport: whenever i've docked/undocked the thinkpad from the docking station, i had to do that twice to get the action actually to happen. First i thought that would be some error in the ACPI code. Here's a short explanation how docking/undocking works: 1) ACPI EC Event 0x37 Handler is executed (EC sends event 0x37 on dock) 2) _Q37 does a Trap(SMI_DOCK_CONNECT). Trap is declared as follows: a) Store(Arg0, SMIF) // SMIF is in the GNVS Memory Range b) Store(0, 0x808) // Generates I/O Trap to SMM c) // SMM is executed d) Return (SMIF) // Return Result in SMIF I've verified that a) is really executed with ACPI debugging in the Linux Kernel. It writes the correct value to GNVS Memory. After that, i've logged the SMIF value in SMM, which contains some random (or former) value of SMIF. So i've added the GNVS area to /proc/mtrr which made things work. I've also tried a wbinvd() in SMM code, with the same result. After reading the src/cpu/x86/smm/smmhandler.S code, i've recognized that it starts with: movw $(smm_gdtptr16 - smm_handler_start + SMM_HANDLER_OFFSET), %bx data32 lgdt %cs:(%bx) movl %cr0, %eax andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */ orl $0x60000001, %eax /* CD, NW, PE = 1 */ movl %eax, %cr0 /* Enable protected mode */ data32 ljmp $0x08, $1f ...which disables caching in SMM code, but doesn't flush the cache. So the problem is: - the linux axpi write to the SMIF GNVS Area will be written to Cache, because GNVS is WB - the SMM code runs with cache disabled, and fetches SMIF directly from Memory, which is some other value Possible Solutions: - enable cache in SMM (yeah, cache poisoning...) - flush caches in SMM (really expensive) - mark GNVS as UC in Memory Map (will only work if OS really marks that Area as UC. Checked various vendor BIOSes, none of them are marking NVS as UC. So this seems rather uncommon.) - flush only the cache line which contains GNVS. Would fix this particular problem, but users/developers could see other Bugs like this. And not everyone likes to debug such problems. So i won't like this solution. Change-Id: Ie60bf91c5fd1491bc3452d5d9b7fc8eae39fd77a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/39 Tested-by: build bot (Jenkins)
2011-06-18T60: set dock LED's in mainboard.cSven Schnelle
The docking takes place in romstage to have early serial I/O for debugging. But to keep romstage small and prevent linking the EC code to romstage, set the status LED's in ramstage. Change-Id: I89fadbd61b6bfd9aff8c22370e51c84325f24751 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/42 Tested-by: build bot (Jenkins)
2011-06-16X60/T60: disable USB power during suspendSven Schnelle
Change-Id: I11afba5d7531132a0274e55e8a478985a0ef956f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/38 Tested-by: build bot (Jenkins)
2011-06-16Lenovo H8 EC: add usb_power_enable()Sven Schnelle
Can be used to disable/enable Power output on USB ports. Change-Id: I5eb52b33c9e3359b0e5874bda2c0c8d75c196bc2 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/37 Tested-by: build bot (Jenkins)
2011-06-15SMM: don't overwrite SMM memory on resumeSven Schnelle
Overwriting the SMM Area on resume leaves us with all variables cleared out, i.e., the GNVS pointer is no longer available, which makes SMIF function calls impossible. Change-Id: I08ab4ffd41df0922d63c017822de1f89a3ff254d Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/34 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-15i945 GMA: restore tft brightness from cmosSven Schnelle
Change-Id: Iaf10f125425a1abcf17ffca1d6e246f955f941cc Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/24 Tested-by: build bot (Jenkins)
2011-06-15Remove old ACPI codeSven Schnelle
it isn't used anywhere, and could be fetched from git/svn history if needed. Change-Id: Iaa2ba39af531d0389d7ab1110263ae7ecaa35c70 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/35 Tested-by: build bot (Jenkins)
2011-06-15i82801gx: replace cafed00d/cafebabe by definesSven Schnelle
We're using '0xcafed00d' all over the code as magic for ACPI S3 resume. Let's add a define for that. Also replace 0xcafebabe by a define. Change-Id: I5f5dc09561679d19f98771c4f81830a50202c69f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/33 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-15Update README with newer version of the text from the web pageStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I4f181979ca5e47b27731c681a320b34cbecc0027 Reviewed-on: http://review.coreboot.org/19 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-by: Sven Schnelle <svens@stackframe.org>
2011-06-15X60: handle EC events in SMM if ACPI is disabledSven Schnelle
Change-Id: I0fee890bd2d667b54965201f5c90da3656d7af5c Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/27 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-15X60: trigger save cmos on volume/brightness changeSven Schnelle
Change-Id: I020e06bc311c4e4327c9d3cf2c379dc8fe070a7a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/25 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-15CMOS: add set_option()Sven Schnelle
Change-Id: I584189d9fcf7c9b831d9c020ee7ed59bb5ae08e8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/23 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-13X60/T60: set CMOS defaultsSven Schnelle
Change-Id: I5789a03898cdbade67887c0389aab5c773f867d9 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/26 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-12ASRock/E350M1: Skip memory clear for boot time reductionMarshall Buschman
Applying Scott's patches to e350m1, svn r6600: Memory clear is not required for non-ECC boards. Change-Id: Ia1a7c926611de72351434cbdc1795ed10bc56ed1 Signed-off-by: Scott Duplichan <scott@notabs.org> Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/20 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-12X60/T60: fix return value of mainboard_io_trap_handler()Sven Schnelle
The handler should return 1 if it handled the request. The current code returns 0, which causes 'Unknown function' logs. Change-Id: Ic296819a5f8c6f1f97b7d47148182226684882a0 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/29 Tested-by: build bot (Jenkins)
2011-06-12log ec data with DEBUG_SPEWSven Schnelle
Change-Id: I26424e80c776bfc134528f42e87fde42d6a13108 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/28 Tested-by: build bot (Jenkins)
2011-06-10Add ACPI automatic PIC/APIC interrupt routing logic for ck804Jonathan A. Kollasch
Change-Id: I2d462ca1220ea31af243c7a58a1dc33c39e9c840 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/13 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-09superiotool: Cosmetics and coding style fixes.Uwe Hermann
Change-Id: Iacda2a9e37635d5cffc5004caf588ef3e5e09b5e Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://review.coreboot.org/18 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2011-06-09H8 EC: add volume CMOS settingSven Schnelle
Change-Id: I5332c8fa52556db34dfb5e772bf544f0323e823d Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/12 Tested-by: build bot (Jenkins)
2011-06-09util/crossgcc: Add build-without-gdb Makefile targetPeter Stuge
Change-Id: I5d02f1a23e54aa67be0cc01d921898c28c22f8e4 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/16 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Buschman <mbuschman@lucidmachines.com>
2011-06-09util/crossgcc: Add buildgcc -G and --skip-gdb optionsPeter Stuge
Change-Id: Ic31130774ad56abf0b5498b04b4890348352a621 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/15 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Buschman <mbuschman@lucidmachines.com>
2011-06-09Change make crossgcc to build without gdb by defaultPeter Stuge
Using gdb with coreboot is not (yet) very common, so at least for now it makes sense to not build gdb by default. A make crosstools target is also added, which runs the full build in util/crossgcc and thus generates a toolchain with both compiler and debugger. Change-Id: I939ebcd06ae9a1bc485fd18e70cac98112d3bbbf Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/17 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Buschman <mbuschman@lucidmachines.com>
2011-06-09Revert changes to set the sb800 to AHCI mode.Marc Jones
Seabios doesn't have this support included yet, which causes the generic Persimmon and other CIMx sb800 platforms to not boot. Change-Id: If07328b7c62d7fc314647adce8fab983ed327854 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/14 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-09Add basic .gitignoreCristian Măgherușan-Stanciu
Ignore directories created by abuild, jenkins, payloads and crossgcc. Change-Id: I7d4145fc1e54a10ffdc4b884d8b8f0ae53e615c6 Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/10 Tested-by: build bot (Jenkins)
2011-06-07T60/PMH7: move 'touchpad' option to pmh7Sven Schnelle
This option is PMH7 specific, and should be moved there, so all Notebook utilizing a PMH7 have this option. For Thinkpads without Touchpad (like the X60), simply don't add 'touchpad' to cmos.layout. Change-Id: Icdd0093670d565f1b16e2483aa286f4d63ccc52a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/6 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-07i82801gx: enable ACPI during S3 resumeSven Schnelle
disabling ACPI during S3 wakeup breaks ACPI wakeup, as the Host OS is assuming that ACPI is enabled. Change-Id: I8ced72c4b553d41a57f26d64998118e8a77621f8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/7 Tested-by: build bot (Jenkins)
2011-06-07SMM: add defines for APM_CNT registerSven Schnelle
in the current code, the defines for the APM_CNT (0xb2) register are duplicated in almost every place where it is used. define those values in cpu/x86/smm.h, and only include this file. And while at it, fixup whitespace. Change-Id: Iae712aff53322acd51e89986c2abf4c794e25484 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/4 Tested-by: build bot (Jenkins)
2011-06-07Add "gitconfig" make target to simplify gerrit configurationPatrick Georgi
"make gitconfig" installs the gerrit commit-msg hook and validates that user.name and user.email are configured. No data will be overwritten. Change-Id: I49ec98538574866e7ad6238ff3d02b9c1beef1bb Reviewed-on: http://review.coreboot.org/2 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-07T60: fix touchpad optionSven Schnelle
Code used 'int' as return type, but the cmos option is only one bit. get_option returned with the value in bit 0-7, but all remaining bits were left unitialized by get_option(). fix this by using char as type. Change-Id: I60e609164277380f936f66c99ef9508fa6a6b67c Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/5 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-07re-indent, so files conform to coding guidelines.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: If840164fa0e2b6349ba920edf06386ba1fe08aab Reviewed-on: http://review.coreboot.org/8 Tested-by: build bot (Jenkins) Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2011-06-06SMM: add mainboard_apm_cnt() callbackSven Schnelle
motherboards can use this hook to get notified if someone writes to the APM_CNT port (0xb2). If the hook returns 1, the chipset specific hook is also skipped. Change-Id: I05f1a27cebf9d25db8064f2adfd2a0f5759e48b5 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/3 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2011-06-06Teach abuild to emit JUnit formatted build reportsPatrick Georgi
Jenkins can produce reports from JUnit test cases, so we fake testcases for each board. Change-Id: I34d46d15c83f4f04d2228f302eb626b261ac098d Reviewed-on: http://review.coreboot.org/1 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-04WARNINGS_ARE_ERRORS is y per default, don't set it twice.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6637 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6594 to e350m1: Cosmetic cleanupPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6636 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6593 to e350m1: Remove unused Kconfig optionsPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6635 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6592 to e350m1: Update GPP port configurationPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6634 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6591 to e350m1: ROM cache earlyMarshall Buschman
Enable rom cache early to reduce boot time. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6590 to e350m1: Work around memory allocation problemMarshall Buschman
Fix memory allocation problem in amdInitLate. Disabled until further debug. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6632 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6589 to e350m1: Strip down AGESA optionsMarshall Buschman
Remove some non-essential agesa options to reduce boot time. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6631 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6588 to e350m1: VGA framebufferMarshall Buschman
Declare legacy video frame buffer so that Windows generic VGA driver will work. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6630 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6587 to e350m1: RTC is not PIIX4 compatibleMarshall Buschman
Declare RTC as not PIIX4 compatible to match AMD hardware. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6629 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6586 to e350m1: FADT revisionMarshall Buschman
Make fadt revision match its length. Solves Windows 7 checked build assert. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6628 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6584 and r6601 to e350m1: SPI prefetch earlyMarshall Buschman
Enable SPI cacheline prefetch early to reduce boot time. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6627 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6583 to e350m1: pstate 0 earlyMarshall Buschman
Switch processor cores to pstate 0 early to reduce boot time. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6626 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6582 to e350m1: 33 MHz SPI read earlyMarshall Buschman
Enable 33 MHz fast mode SPI read early to reduce boot time. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6625 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6578 and r6596 to e350m1: MMCONF basePeter Stuge
Remove multiple mmconf settings and just use kconfig setting. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6624 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6574 to e350m1: MMCONF sizeMarshall Buschman
Size mmconf according to CONFIG_MMCONF_BUS_NUMBER. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6623 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6573 to e350m1: VGA, PCI MMIO and SB800 legacyMarshall Buschman
1) Use D18F1xF4 VGA Enable to simplify legacy video I/O support. 2) Extend PCI MMIO limit from dfffffff to fecfffff. 3) Add AMD recommended non-posted mapping for SB800 legacy devices. Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6622 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04Port persimmon r6572 to e350m1: I/O APIC IDMarshall Buschman
1) Set I/O APIC ID according to BKDG recommendation 2) Correct I/O APIC ID reported by mptable Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6621 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-04vt8237r: Simplify bootblock init to work around nested if() romcc problemPeter Stuge
During the hackathon in Prague we discovered that romcc has a problem compiling the previous nested if() statements correctly. This patch makes the code a little simpler, and indeed works around the romcc issue. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6620 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-03This patch sets max freq defaults for ddr2 and ddr3for fam10.Marc Jones
Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6619 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-03Correct wrong PCI ID for VIA K8M890 Chrome.Alexandru Gagniuc
With the K8T800/M800 patch from r6367 the PCI IDs for the VIA chrome were moved to pci_ids.h. The PCI ID for K8M890 chrome was copied incorrectly. (3220 instead of 3230). This patch defines the correct PCI ID for this device. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6618 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-03advansus/a785e-i mainboard enable warning as errorKerry She
Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Kerry She <kerry.she@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6617 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-01Really fix iasl filename issues in our build systemPatrick Georgi
There's a remaining issue that iasl cuts of "\..*$" from output paths, even if that substring contains "/" (ie. across directories) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6616 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-01Report build result from abuild (did all requested boards build?)Patrick Georgi
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6615 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-01trivial remove blanks at the end of lineKerry She
Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Kerry She <kerry.she@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6614 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-06-01This patch fix a AMD sb800 wrapper compile warning:Kerry She
src/southbridge/amd/cimx_wrapper/sb800/late call clear_ioapic but not include the prototype declare header file. Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-23We don't have pausing versions of single-IO instructions.Stefan Reinauer
Hence remove the wrong comment. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6612 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-23AP_IN_SIPI_WAIT is already defined in the CPU Kconfig of those boards.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6611 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-23Correct implementation of r6608.Jonathan Kollasch
(.align actually takes its argument in bytes) Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6610 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-23exclude src/vendorcode from GPLv2 license checks.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6609 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-22Ensure ck804 romstrap is 16-byte aligned.Jonathan Kollasch
This alignment seems to be necessary for the chip to recognize it. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Acked-by: Jonathan Kollasch <jakllsch@kollasch.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6608 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-21Add regression test for build directory handling to make lint targetPatrick Georgi
A couple of scenarios that were fixed in the last few revisions are tested to ensure that it's easy to determine breakage. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6607 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-20Handle absolute source file pathsPatrick Georgi
We used to fail there because we unconditionally prefixed the relative directory where it was referenced. Tested in various scenarios: - obj=build - obj=../obj - obj=$PWD/../obj - obj=/some/other/absolute/path - obj=/./some/other/absolute/path In-tree relative paths still work as before, the only change in behaviour is when a source file name (as specified in one of the *-y variables) starts with "/". Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6606 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-20Handle both cases, obj being absolute and relativePatrick Georgi
gnu make's handling of filenames is less than optimal. It simply compares strings, so foo/../bar is different from bar, even though they're logically the same. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6605 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-20Fix building with relative path to object directory outside the source treePatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6604 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-20iasl still can't cope with extra "." in file pathsPatrick Georgi
It's really a work around, but given how this issue seems to come back again and again, let's work around it. Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6603 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-20Fix ccache behaviour if more than one ccache in PATHPatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6602 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-20Correct amd persimmon romstage code for early SPI prefetch enable.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6601 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-20Move the ACPI FACP table to the front of the RSDT list. This is done to work ↵Scott Duplichan
around a Windows XP or Server 2003 setup failure where an error message such as: "An unexpected error (805262864) occurred at line 1768 of d:\xpclient\base\boot\setup\arcdisp.c" occurs. This change updates AMD reference board projects, but could applied to others as well. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6600 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-16Move crossgcc rules to coreboot specific MakefilePatrick Georgi
Toplevel Makefile should (as far as possible) be coreboot-agnostic, we have Makefile.inc for that. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6599 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-16Add crossgcc target to automatically build reference toolchainCristian Magherusan-Stanciu
This means that a simple: $ make crossgcc creates the reference toolchain in the correct directory. Thanks to the dependency on the clean-for-update target, an existing .xcompile along with any compiled objects in build/ will be cleaned out, so the next build will automatically use the newly created reference toolchain. Signed-off-by: Cristian Magherusan-Stanciu <cristi.magherusan@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6598 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-16cimx_wrapper/sb800: Fix indent in late.c:sb800_enable()Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6597 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Remove multiple mmconf settings and just use kconfig setting.Marc Jones
Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6596 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15agesa_wrapper: Avoid repetitive Kconfig depends, trivialPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6595 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 10:29:15 +0000