Age | Commit message (Collapse) | Author |
|
Use the `AZALIA_PIN_CFG_NC(0)` macro instead of `0x411111f0` and tidy up
some comments (align them and be consistent with capitalisation).
Tested with BUILD_TIMELESS=1, prodrive/hermes remains identical.
Change-Id: I1ff1197b1309fc0e5b978d6d36867a3f1a68c67c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Now that we also have the devicetree registers for the USB PHY config
in the openSIL case, add the USB PHY config setting from the Phoenix
with FSP devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a0acbf1b9d705dbf09f4480eb35e71e587ddd44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add the USB PHY configuration structs for the openSIL case, so that
those can be configured in the devicetree like in the FSP case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ied25e90859c4b1bc9b876bed3f3c46358ca36d32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82584
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the now common get_ddi1_type function to update the connector type
of the DDI1 port to match the display output extension card plugged into
the reference board.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7c51eab0d32e0a1708da415f690689a8ec38dcd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82583
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both port descriptor files used in the FSP case contain an identical
get_ddi1_type implementation, so factor it out into a separate file.
This will also allow using the same function in the openSIL case in a
following patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6f5b75b9bdbdc67901d157079785c8fa2915bf0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82582
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a static DDI port configuration to the devicetree used in the
Phoenix with openSIL case. The configuration is taken from the
birman_ddi_descriptors array in port_descriptor_phoenix.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b85b04114591f3e9da183019c98ca2cb08e59da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82581
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the FSP case, the DDI descriptors aren't part of the devicetree and
are instead retrieved in romstage by calling the mainboard's
mainboard_get_dxio_ddi_descriptors function which allows updating the
descriptors during romstage where the devicetree is static. In the
openSIL case, the DDI configuration is first needed in ramstage, so we
can put this info into the devicetree and update it if needed in
ramstage.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de12ff6af42e38751a3016efa313613677fa87a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82580
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Remove the unexpected '<' char at the end of the comment about the PSPP
policy config.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id821351ce3a7a2b7844d8e7478fa3de3227a7da9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82579
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Remove the TODO to update the chipset devicetree for Phoenix, since this
has already been done.
When re-checking the chipset devicetree, I found conflicting information
about the existence of the PCI bridge to an external PCIe port on bus 0
device 1 function 5, but after looking into this, I'm reasonably certain
that it either doesn't exist or at least wouldn't be usable, so I won't
add that one to the chipset devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f0e1540ed45408e86186253d3982a7ba0065ac6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Guard OCP functions calls to allow builds without OCP drivers.
Change-Id: Ie9a82387366a8bb3387bcba3ec7a4c7f0100f78c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update Makefile to include fw_config file for mtlrvp board.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Id41cd8b015a796f7a959ceccf85106a48d15ae35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82559
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit f867c9c5473156617691d78350c362cd993bfcdd.
The new verb table breaks external mic detection on brox.
Revert and use old verb tables instead.
BUG=b:330433089
BRANCH=main
TEST=Verified headset on Brox
When connected to audiojack in power_save state of legacy hda driver,
headset is detected and audio is resumed.
Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nova will use SOLDERDOWN. Add memory.c to override baseboard.
Update dram id table for correct platform parameter.
BUG=b:328711879
Change-Id: I6fbce991ef5ab9f0e6216ad1a5af73fcc1996a2a
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82474
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On GreenbayPOC, HDA Codec used is ALC236, different with Brox (ALC256)
Update to Realtek provided verb table for ALC236 audio codec.
BUG=b:336967284
TEST=Verified headset and audio workable on DUT with "rec" and
"aplay" command.
Change-Id: I9fbe57a0acab20387754f6b6cb5705e34c1c149b
Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82413
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds some helper functions for FDT, since more and more mainboards
seem to need FDT nowadays. For example our QEMU boards need it in order
to know how much RAM is available. Also all RISC-V boards in our tree
need FDT.
This also adds some tests in order to test said functions.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2fb1d93c5b3e1cb2f7d9584db52bbce3767b63d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81081
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I5c22913b35848c5ea32d6805ea081abefd3380bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82237
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
psys_pl2_watts is configured in SoC node of devicetree.
Value represents Watts.
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST=emerge-ovis coreboot
Change-Id: I9c4d62b93fc751db9e0ea04e475acb8861a844f8
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add devicetree settings per the schematic.
Differences to gladios:
1. remove SD reader
2. remove EMMC setting
3. modify USB port distribution
FRONT
-------------------------------------------------------
| A3 A1 |
| C0 A2 A0 |
-------------------------------------------------------
BACK
-------------------------------------------------------
| --------------- |
| | TX25A | |
-------------------------------------------------------
BUG=b:327549688
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: Ia010e99c21e8d6088f6bb873f79dc19cadc9e455
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81447
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: Ie087f43e6f60df7b97d7d7b402d3540c3a0a2461
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Debian sid is too unstable at this point, and frequently ends up having
issues that cause the coreboot-sdk docker image to fail to build. Using
stable also better reflects what users will typically be running.
Also remove the parameters to quiet the apt-get install command so that
if something does break, we can see what happened more easily.
Fixes bug 536
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41b6464b024df89c114db2cdb9367c0526eb0297
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82411
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the submodule pointer to current main. This brings in 5 commits:
* e096913 connector_info: Fix HDMI/DVI default bytes per color setting
* 87469f2 gma config: Add new device IDs for Raptor Lake
* 4be2e75 gma: Update transcoder setup for TGL
* 4b991bf gfxtest: Drop unnecessary with of ancestor
* 17cfc92 tgl plls: Disable warnings about unused variable
Change-Id: Ic40edc773ba11ab9a0f9e92057bd687d10b95069
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82554
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Refactor the `get_port_b_vref_cfg()` function to only return the
variable bits of the value. The NID itself is not connected, and
the `misc` field in the verb conveys the Vref value.
Change-Id: I5108f5339c5b002403a4e5339da6d52046c8bcbe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82395
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit renames the variable _ARCH to _ARCHDIR in the libpayload
build script (lpgcc) to align with the naming convention of other
variables used in this file.
This change improves code readability and maintainability.
Change-Id: Iea4af68e49ab1cd7ec8156a14f8215244e9c0622
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82479
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Probe C1 port in devicetree and disable un-used C1/A1 port by FW_CONFG.
BUG=b:339534479
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
flash and check boot log on DUT.
Change-Id: I944ff6f2fa712e7579ed1c9879f75835adc3ac4c
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Remove unused setting for retimer.
BUG=b:328711879
Change-Id: I48d8680d43a07aa3408dfbf5b25b568c2b51b343
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82475
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The cr50.c file currently prints "cr50" in debug messages no
matter the system is using Cr50 or Ti50. This can be confusing
for developers.
This patch replaces "cr50" with "GSC" in debug messages. Using
"GSC" makes the messages more clear and easier to search via
`grep`.
BUG=none
TEST=Build and test on karis
Change-Id: I21f66cf8b608ca4e4dc82d7a55a851ec996c8bb3
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82420
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Beechnut City CRB is the 2 socket reference board for 6th Gen Xeon-SP
SP SoCs (Granite Rapids SP and Sierra Forest SP).
This patch initially sets the code set up as a compilation target with
GNR N-1 FSP, and with basic feature supports (Integrated IO Controller
(IIO) configuration, BMC, UART, HPET).
TEST=Build on intel/beechnutcity CRB
Change-Id: I3f6a0fb97b62baadb438fb9f11fdd78fccb3f89a
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Avenue City CRB is the 2 socket reference board for 6th Gen Xeon-SP
AP SoCs (Granite Rapids AP and Sierra Forest AP).
This patch initially sets the code set up as a compilation target
with GNR N-1 FSP, and with basic feature supports (Integrated IO
Controller (IIO) configuration, BMC, UART, HPET).
TEST=Build on intel/avenuecity CRB
Change-Id: I64fdd5388aadf7732f6d3daa600c1455d3672a46
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add IIO configuration utils shared in GNR boards to handle the
complex IIO configuration settings.
Change-Id: If7146761db6f73a0c4b0d31b010c0d30a42bf690
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
When support for the dictation key was added in commit f2782b8328d5
(acpigen_ps2_keybd: Add support for dictation key), I had failed to
include this portion of the change in that commit. The top row key of
`TK_DICTATE` needs to be converted to the ps2_action_key. This commit
simply adds that mapping so that it can be translated.
BUG=b:333101631
TEST=Flash DUT that emits a scancode for a dictation key, verify that it
is mapped to KEY_DICTATE in the Linux kernel using `evtest`.
Change-Id: I1be8c0a96931cca36e6bbbfa0be7d36c4cd93768
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82274
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of including stub/mpio/chip.h, include chip/mpio/chip.h that
will include the correct implementation to be able to use the same file
with both the openSIL stub and the actual openSIL implementation glue
code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaae26a0dfe0ba96842e72582c06f1b0b3f29871c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82472
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes VPU enablement code that is no longer needed because
the VPU is already enabled by default in the baseboard devicetree.
BUG=b:332488817
TEST=Able to see VPU PCI device in lspci list after booting
google/screebo to OS
Change-Id: I94de92e970be1548068ed4e19309a95129f041ff
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82423
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch enables the Versatile Processing Unit (VPU) by default for
Rex/Ovis baseboard. VPU is a dedicated AI engine that is included in
the 14th generation "Meteor Lake" Core processors.
The VPU is designed to efficiently run AI models directly on the
system on chip (SoC). There is no power regression observed while
keeping the VPU default enabled to run AI models natively hence, this
patch enables the VPU by default.
BUG=b:332488817
TEST=Able to see VPU PCI device in lspci (0:11:0) list after booting
google/screebo to OS.
Change-Id: I8b3521c8ec613b002f971eaf9d346927fe8cd656
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Set lowercase hex format for IGD DIDs.
BUG=b:326901448
TEST=Build tivviks and verify the IGD IDs.
Change-Id: I1299512d1c48eba854fea2ec394cef40d44a87d7
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82414
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
There is no direct way to override CPU default power_limits for
different SKUs.
This CL add structure variant_get_soc_power_limit_config() for
variants to define and configure the values of soc_power_limits_config
for current CPU SKU.
Variants can override these values i.e. pl1, pl2, psyspl2
in variant_devtree_update().
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST=FSP debug emerge-ovis coreboot intelfsp
check overrides setting
Change-Id: Ib60fa4e3fc502d0aeb0c94ad46ba5a55b4dd027c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82199
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on latest schematic to update the gpio table.
BUG=b:327549688
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I3d01e3b9eaef72d9e143f5163ee49d8c8f455b5f
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82412
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function had roughly the same use (except PAT) as part of
memset_pae(), however the latter is able to make use of PAE and map
physical memory located above 4 GB. Remove paging_identity_map_addr()
to avoid semi-duplicated code.
The function has been unused since CB:26745.
Change-Id: I7a4ebd84a6f5d222c3b2c6c6e3d26d6464cf01b8
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82248
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Report upgraded version for ACPICA, CMake, nasm, LLVM and GCC.
Change-Id: I93a9ae4a2f4c3403a6e8c9a8b7aca74b996e7db8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82410
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Upstream commit 11ad164bce (UefiPayloadPkg: Make UPL build script arch
agnostic, 2024-02-22) changes the build script's behavior to not assume
the arch. Without defining BUILD_ARCH, the build script will not
function properly and results in the payload failing to build.
Both UefiPayload and Universal Payload can only be built in X64.
Change-Id: Icd942d0c15a99231d09f9cbdc5eb48333b6aa6e5
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
In preparation for the upcoming release, add the template for the
24.05 release and update index.md.
Change-Id: I733f541a2d6e556c82aff1656fe7f79ae3673ba7
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82400
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Phoenix 2 has less PCIe lanes than Phoenix, so some of the lane end
numbers need to be adjusted to take that into account. When the Kconfig
options WLAN01 or WWAN01 are set, either the WLAN or the WWAN card uses
both PICe lanes that are available for those two devices, so the MPIO
descriptor information the devicetree needs to be updated accordingly
and the bridge to the PCIe port that doesn't have any lane left needs to
be disabled. Two other PCIe devices will be disabled when the
corresponding Kconfig options ENABLE_EVAL_CARD and DISABLE_DT_M2 have
the value that results in the device being disabled via some GPIO driven
by the EC. Since the code is specific to the openSIL case, only include
it in the build in the CONFIG_BOARD_AMD_BIRMAN_PHOENIX_OPENSIL case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I23c14cc03980ea1e39f7e5aec551b975c237e487
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Add the stub MPIO chips that contain the PCIe engine configuration for
the external PCIe interfaces to the devicetree. Birman's
port_descriptors_phoenix.c was used as a reference. The static
configuration in the devicetree assumes that the default WLAN0_WWAN0 is
selected; for the other cases we'll still need to fix up things
accordingly in the mutable devicetree. The WLAN01 and WWAN01 cases still
need to be handled in a follow-up patch. Since openSIL currently doesn't
use the info from the gpio_group struct element, but deasserts both PCIe
reset pins GPIO 26 and 27, the gpio_group isn't specified in the chip
configuration in the devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icabe60322d46c1195284dd77ec39f9d143e3d2cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Create the orisa variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:337178014
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_ORISA
Change-Id: I0cd8d763ffd8864b455a7f8909e95f6aee8bb23e
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Idf5912d1fcdfabab7fe006b7e0cd4ebd25c07d09
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81683
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I03a44e0c23a925396f614f282882405dc886ba58
Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Remove the patch since it was picked from master before and thus it's
included in the new release.
Change-Id: I70408b189b974f8abaadc66f0c809a1dbe10504b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81900
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I41f56ba58af51b1ec1d7554fb35a49ccf9e778f6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Iaf2d4f579d987fbfd4187ae41c1be5cec55e0e8e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
These are the final release notes for the 24.05 release before the tree
is marked with a tag, completing the release. We will update the notes
with final numbers and anything else after the release is tagged.
The 24.05 release will be announced a week later, barring any issues
that require an updated release tag.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I00be0127351f8641116b4bc523c266628b084e69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82407
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
coreboot GNR (Granite Rapids) is a FSP 2.4 based, no-PCH, single
IO-APIC Xeon-SP platform. The same set of codes is also used
for SRF (Sierra Forest) SoC.
This patch initially sets the code set up as a build target with
Granite Rapids N-1 FSP (src/vc/intel/fsp/fsp2_0/graniterapids).
1. All register definitions are forked from SPR (Sapphire Rapids)
and EBG (Emmitsburg PCH)'s codes are reused.
2. src/soc/intel/xeon_sp/chip_gen6.c is newly added as chip
common codes for 6th Gen Xeon-SP SoC (Granite Rapids) and later.
Change-Id: I3084e1b5abf25d8d9504bebeaed2a15b916ed56b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Auto-generated by util/vboot_list/vboot_list.sh.
Change-Id: I5e1a7046b03687d15e8ceae2074ec25aa72a6f28
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82399
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add PCI ID for RPL tracehub and update the PCI ID in the
pci_device_ids[] in tracehub.c.
Reference:
Raptor Lake External Design Specification Volume 1 (640555)
BUG=None
TEST=Verified on brox
Change-Id: I5d5c6c8ff44bcb5a7bbbd3e27a1577c169ecd6a9
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Yes, the DSDT revision is the OEM revision. But most certainly not that
of the board being ported. Because no one seems to care about the value
(newer boards inexplicably use lower values even though this represents
a date in 0xYYYYMMDD format), simply drop the incorrect comment. Should
save a bit of effort when reviewing mainboard ports: no longer will one
have to ask authors to drop the comment.
Change-Id: I9c425573e4fcb0f670a780e7821e815eadc8a2aa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The README suggests using `logs` as the folder name where autoport puts
the generated logs. Thus, add this folder to .gitignore for the sake of
convenience. Yes, people can use other folder names, but `logs` is most
commonly used.
Change-Id: I37906b43ba3e132de616184e4a5082ce00f4b230
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82398
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Reference:
Panther Lake External Design Specification Volume 0.51 (815002)
BUG=b:329787286
TEST=verified on Panther Lake Simics Platform.
Change-Id: I941d6e1c8a697234b8e64a2523e60587897d7f7a
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81848
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Panther Lake specific CPU and PCIE device IDs
Reference:
Panther Lake External Design Specification Volume 0.51 (815002)
BUG=b:329787286
TEST=verified on Panther Lake Simics Platform.
Change-Id: I82f47b6077e28a01f34c59b7e7697323b3d5f990
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81849
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
BUG=b:329787286
TEST=verified on Lunar Lake RVP board (lnlrvp).
Change-Id: I92b65c946682387cbb841d558c6f0a7cb0fcd4ac
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81850
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Iccmax of VccIn_Aux is 25A with MBVR design.
BUG=b:330117043
BRANCH=firmware-nissa-15217.B
TEST=Local build successfully and boot to OOBE normally.
Change-Id: I105dc9df53c624fd7fc697408a1097e023a3cd68
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81445
Reviewed-by: Simon Yang <simon1.yang@intel.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add stop pin control for G2 touchscreen refer to
G7500_Datasheet_Ver.1.2.
BUG=b:335803573
TEST=build and verified touchscreen works normally
Change-Id: I4f085c67c0cdb8b9ca3ff03993fda69cca6319ef
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82254
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Copy the data.vbt from brox to greenbayupoc
BUG=b:326413034
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT
Change-Id: I1e8101519ab2ecbb4654c20485fbe83c90656e4d
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82108
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on latest schematics GREENBAY_0412.SCH update the gpio and
devicetree settings.
BUG=b:326413034
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT
Cq-Depend:chrome-internal:7218819
Change-Id: I59f25b8abb7dd8a2dff7ff567b231bddc9db8455
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This patch removes all instances of the `protected_mode_jump` API and
its associated header file.
The API is no longer used by any code within the tree.
BUG=b:332759882
TEST=Built and booted 64-bit coreboot with 32-bit payload successfully.
Change-Id: I3eb31b09c92512338ccc540f60289960bd6bf439
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82372
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The payload execution process has been updated to utilize
protected_mode_call_1arg in order to guarantee proper handling of
function parameters.
The previous use of protected_mode_jump with a "jmp" instruction did
not allow for proper stack setup for argument passing, as the calling
convention was not aligned with the System V ABI calling convention.
This patch ensures that calling into the libpayload entry point using
protected mode is now aligned with the System V ABI calling convention.
This resolves an issue where retrieving the "pointer to coreboot tables"
from within the libpayload entry point was failing due to incorrect
argument passing.
BUG=b:332759882
TEST=Built and booted 64-bit coreboot with 32-bit payload successfully.
Change-Id: Ibd522544ad1e9deed6a11015b0c0e95265bda8eb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82294
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Currently the Focal touchpad does not work. Based on the Focal touchpad vendor, upadet the HID descriptor address from 0x20 to 0x01.
BUG=b:339756281
TEST=Build and check Focal touchpad can work.
Change-Id: I383ad907e6a23c34ab1bd0f6594a87564e21181d
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Support Memory of Micron MT53E512M32D1NP-046 WT:B and Hynix
H54G46CYRBX267 in mem_parts_used list, and generate SPD ID for these
parts.
DRAM Part Name ID to assign
MT53E512M32D1NP-046 WT:B 0 (0000)
H54G46CYRBX267 0 (0000)
BUG=b:337173071
BRANCH=firmware-dedede-13606.B
TEST=Run command "go run \
./util/spd_tools/src/part_id_gen/part_id_gen.go \
JSL lp4x src/mainboard/google/dedede/variants/pirika/memory/ \
src/mainboard/google/dedede/variants/pirika/memory/\
mem_parts_used.txt"
Change-Id: I9b1a2a622d0ca1298671b1da58beacc1b4244769
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82094
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I136905d60de14749cfa325b24de3df204f0135ec
Signed-off-by: Lennart Eichhorn <lennart@zebre.us>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82116
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a nvram option for front audio panel type.
If it is set to AC97, reprogram front line out and microphone
pins to match vendor firmware under same configuration.
TEST=On asus/p8z77-m housed in an AOpen H340D case with an AC97
front audio panel, front panel line out port is now available as
headphone port in Fedora 39 with this patch applied and option
set correctly. And it works. Without the patch (or with this option
set to HD Audio), front audio ports are completely inoperable.
Change-Id: I39ccf066d87c5744a697599861719182768e0728
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Change-Id: I353ceb7ab5ec0c82f5e717c856ad7934fcbd03b6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82355
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3aa669042908b92d7b270df077a352e197071780
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82354
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib86df42c74474ab6d0bd389073c36ca0761748af
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Change-Id: I2d73f7815e83e8bf0c6d0a402d32bc99c32c7d90
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82243
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I48b833a3727d4b7d7c50371dbe8f090983d80e36
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Pad names now matching soc/intel/xeon_sp/ebg/soc_gpio.c.
Test: Generated pad names for ASRock Rack SPC741D8 now compile.
Change-Id: Ied53b654f905add86a05bce8c2e366dea9ccf4d3
Signed-off-by: Fabian Meyer <fabian.meyer@student.kit.edu>
Co-authored-by: Yussuf Khalil <yussuf.khalil@kit.edu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82205
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a comment for unused AMD_FWM_POSITION_20000_DEFAULT.
Change-Id: Id8369f488893e7e5b2e7e7126d1b53199ed1aa77
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add data.vbt file for riven recovery image. Select INTEL_GMA_HAVE_VBT
for riven as it has a VBT file now.
The VBT file is copied from the nivviks reference board.
BUG=b:337169542
TEST=build pass
Change-Id: I499c1b3e61581483a1640375270f7707ebe8deeb
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82269
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function isn't used anywhere. It probably wouldn't work with
current coreboot anyway, as it identity mapped lower 2GB of RAM, while
ramstage is run from CBMEM, which is usually just below top of memory.
It was last used in K8 code that is long gone.
Change-Id: I97e2830f381181d7f21ab5f6d4c544066c15b08c
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
|
|
Disable c1 state auto-demotion support for brox
BUG=None
BRANCH=None
TEST=Boot brox and verify in fsp debug logs
Change-Id: I18d40cd721d46fce4702cf1a943583cd41c03cf4
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82104
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Details:
- Add support for new Lunar Lake MCH ID 0x6410
- Add new CPU id 0xb06d1
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
TEST=Build, boot the system and verfiy MCH-ID prints in bootblock stage.
Below prints verified on Lunar Lake RVP board (lnlrvp).
[DEBUG] MCH: device id 6410 (rev 02) is LunarLake M
Change-Id: I976d7f269485633d835d204afa224736d71baaa8
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81847
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Without this patch, ACPI SSDT does not supports and lists CNVW.
With this patch, verified "CNVW" in ACPI SSDT listing.
Scope (\_SB.PCI0)
{
Device (CNVW)
{
Name (_ADR, 0x0000000000140003) // _ADR: Address
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
BUG=b:329787286
TEST=verified on Lunar Lake RVP board (lnlrvp).
Change-Id: I5a0a3fbc9f43a6a573e33fcf3901055e10faaed1
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81846
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previous CL misspelling VR domain to IA not GT which cause
FVM Itrip(GT) not set correctly.
This CL corrects it to VR_DOMIAN_GT and confirm FVM Itrip(GT)
has set to 54.
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST= FSP debug emerge-ovis coreboot intel-mtlfsp
check overrides setting
IccLimit[1] = 216 ( 1/4 A)
Change-Id: I99df053869aa11b7c82aa0b7f7ec0acf73467a76
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
The chip drivers in the devicetree use the path where the corresponding
chip.h file resides both to include this chip.h file in the static.c
generated by util/sconfig from the devicetree and also for the names of
the chip config and chip ops struct. To be able to build a SoC using
either the MPIO chip driver from the openSIL stub or from the actual
openSIL glue code without needing different devicetree files for the
different cases, introduce a common MPIO chip.h file that then includes
the correct MPIO header file. The chip config and ops structures also
need to be renamed to take this change into account.
Thanks to Matt for pointing out how to make the path to the actual MPIO
chip.h file configurable via a Kconfig setting. This allows overriding
this path from site-local without the need to have any reference to
site-local in the upstream code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iead97d1727569ec0d23a2b9c4fd96daff4bebcf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82262
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idef3b661b1cf3008373e61e0760a7dd3b9e9fede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82261
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enables parsing Meteor Lake inteltool output into gpio.h pad macros.
Change-Id: Iaebd51d587507e68c6f263b92dc61cb6c0411bf8
Signed-off-by: Filip Lewiński <filip.lewinski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81916
Reviewed-by: Maxim <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
Also switch configs to use combo v1/v2 FSP
The reason for this change is to simplify configuration - instead of
multiple targets for VP4630 and VP4650 or VP4670, it's now possible to
have one target covering all VP46x0.
Change-Id: I1a6f6e873e4ec35b9777dc17c0495151348d1d88
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81963
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Configure SODIMM settings for greenbayupoc. The SODIMM settings are
copied from mainboard/google/brya/variants/baseboard/brask/memory.c.
BUG=b:336955026, b:332230842
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot to OS
using Hynix HMAG56EXNSA051N 4G and Micron MTA8AFT1G64HZ-3G2R1 8G SODIMM.
Change-Id: I1552cadfa81c48fe561947ded078bcca2e6bc6ad
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82085
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add supported memory parts in mem_parts_used.txt, and generate
SPD id for these parts.
1. MT62F1G32D4DR-031 WT:B (Mircon)
2. MT62F512M32D2DR-031 WT:B (Mircon)
3. H9JCNNNBK3MLYR-N6E (Hynix)
4. K3LKLKL0EM-MGCN (Samsung)
5. K3LKBKB0BM-MGCP (Samsung)
6. H9JCNNNCP3MLYR-N6E (Hynix)
BUG=b:337169542
TEST=build pass
Change-Id: I0ff3b1e14fb8bb87d8fc9cbe0e177a5bcedef08c
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82255
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Based on:
Intel Core Ultra Processor External Design Specification
Meteor Lake SOC IO Registers
Meteor Lake-U/H/U Type4 and Arrow Lake-U/H GPIO Implementation Summary
Change-Id: I7473119fa97c57cd2a1303f08f964abd0ca96270
Signed-off-by: Filip Lewiński <filip.lewinski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
initramfs is not build when bzImage is selected
Add build/initramfs dependency to build/bzImage
BUG = N/A
TEST = Built and boot facebook monolith
Change-Id: I002202a0340347e78ce22024761d997605bd3f72
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77606
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit overrides the EFIAPI macro definition when using FSP on
x86_64 to ensure the correct calling convention is used.
On i386, there is no side-effect since the C calling convention used
by coreboot and FSP are the same. However, on x86_64, FSP/UEFI uses
the Microsoft x64 calling convention while coreboot uses the System
V AMD64 ABI.
This change resolves this incompatibility by setting EFIAPI to
attribute((ms_abi)) on x86_64 when using FSP.
TEST=Able to build google/rex0 in 32-bit and 64-bit mode.
Change-Id: Ifae910be66d550af04cce5136d186a7e9dd085b3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82266
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Included <efi/efi_datatype.h> to address coreboot style header
definitions rather using EDK2 header <Base.h>.
TEST=Able to build google/rex0.
Change-Id: I66559872c8d137d1baef5860fb98cad2a5214368
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82265
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. VCOM OTP burning, initial code Settings can be deleted, B6h
2. Fine-tune VGH, VGL, VGHO, VGLO voltage, B1h PA6
3. Boot CLK performance change: add E9h, C7h, E9h
4. Extend TFT life: D5h PA25~PA32,D3h PA1~PA5;
5. Gamma optimization: E0h
6. Improve picture quality, add EQ: D2h to CLK
7. Press mura to improve and modify B1h PA4 and PA5
BUG=b:320892589
TEST=boot ciri with IVO_T109NW41 panel and see firmware screen
Change-Id: I13421660faba9ef8e33a51c5ab28aeb1388aff40
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82240
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
|
|
Change-Id: I694af163fb530be49561e74e74d9c08e04986a44
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82223
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds LPDDR4X, DDR5,LPDDR5, DDR5_NVDIMM_P and LPDDR5X, according
to revision of JESD400-5A.01, January 2023.
Change-Id: I15802da03dc748c0e7f6b035fed25371afe3eed4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82217
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TF-A migrates the default choice of linker to GCC in order to enable
LTO. Change BL31_LDFLAGS from `--emit-relocs` to '-Wl,--emit-relocs', so
that GCC is able to pass `--emit-relocs` to the linker.
[1]: https://review.trustedfirmware.org/c/26703
BUG=b:338420310
TEST=emerge-geralt coreboot
TEST=./util/abuild/abuild -t google/geralt -b geralt -a
TEST=./util/abuild/abuild -t google/oak -b elm -a
Change-Id: I65b96aaa052138592a0f57230e1140a1bb2f07ac
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82189
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 17bef2248:
2024-02-05 23:33:50 +0100 - (Merge "feat(fvp): delegate FFH RAS handling to SP" into integration)
to commit id 48f1bc9f5:
2024-05-02 10:13:54 +0200 - (Merge "feat(zynqmp): remove unused pm_get_proc_by_node()" into integration)
This brings in 535 new commits.
Change-Id: I562dd4d1e1ddc187341ae5856d47eeedfca85619
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Currently EOP message is sent to CSE late in the boot flow. Instead send
it asynchronously to save ~10 ms in boot time.
BUG=b:337330958
TEST=Build Brox BIOS Image and boot to OS.
Change-Id: I229d16a5dcd072958db3f59a9c364bf7508b3047
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change is for upcoming arm-trusted uprev commit.
TF-A refactors the toolchain detection in [1][2]. After that `AR`,
`CC`, `LD` and other toolchain variables have precedence over
`CROSS_COMPILE`.
Since ChromeOS build system also sets those toolchain variables when
building coreboot, it results that TF-A uses CrOS GCC instead of
coreboot SDK. It needs to unset those variables in order to make
`CROSS_COMPILE` effective.
TF-A upstream changes the default linker from BFD to GCC in [3].
Therefore, temporarily overriding LD as $(LD_arm64} to fix the below
build error.
aarch64-elf-gcc: error: unrecognized command-line option '--emit-relocs'
In addition, TF-A wrapped LD with single quotes to solve Windows path
issue[4]. On MT8173 platform, `--fix-cortex-a53-843419` is appended to
$(LD_arm64} for ERRATA_A53_843419. It results in the below build error.
/bin/sh: 1: --fix-cortex-a53-843419: not found
Since `--fix-cortex-a53-843419` is never passed to TF-A, simply extract
the LD command from $(LD_arm64) by $(word 1, $(LD_arm64)).
[1]: https://review.trustedfirmware.org/c/24921
[2]: https://review.trustedfirmware.org/c/25333
[3]: https://review.trustedfirmware.org/c/26703
[4]: https://review.trustedfirmware.org/c/26737
BUG=b:338420310
TEST=emerge-geralt coreboot
TEST=./util/abuild/abuild -t google/geralt -b geralt -a -x
TEST=./util/abuild/abuild -t google/oak -b elm -a -x
TEST=./util/abuild/abuild -t google/cherry -x -a
Change-Id: Ieac9f96e81e574b87e20cd2df335c36abcb8bb5c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
In order to support SVP Feature, EMI-MPU has to give MFG permissions
to allow MFG to access secure buffer by secure read and write.
Currently MFG is in domain 0, which include many other masters.
Move MFG to domain 6.
Set MFG remap, so that MFG can switch to protect mode by MFG register.
Change MFG permission from NO_PROTECTION to SEC_RW_ONLY for domain 0,
so that only AP in secure mode can access MFG_S_S-2 and MFG_S_S-5.
BUG=b:313855815
TEST=emerge-geralt coreboot
Change-Id: Ic6fb7d85bf9d4d92946a045a274b274abc440e1d
Signed-off-by: Fei Yan <fei.yan@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Update the pad reset config for WLAN Interrupt from PLTRST to DEEP
so that it can still act as a wake source during S3 suspend.
BUG=b:336398012
TEST=Build Brox BIOS image and boot to OS. Suspend to S0ix & S3 and
wakeup successfully using Wake on WLAN.
268 | 2024-05-07 13:56:44-0700 | S0ix Enter
269 | 2024-05-07 13:57:07-0700 | S0ix Exit
270 | 2024-05-07 13:57:07-0700 | Wake Source | GPE # | 3
271 | 2024-05-07 13:59:01-0700 | ACPI Enter | S3
273 | 2024-05-07 13:59:26-0700 | Wake Source | PME - WIFI | 0
274 | 2024-05-07 13:59:26-0700 | ACPI Wake | S3
275 | 2024-05-07 13:59:26-0700 | Wake Source | GPE # | 3
Change-Id: Ie0d6e6c8fefdd081e252ea99d6e3c559a5330b0e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82234
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to Brox HW design, the PsysPmax is supposed to be 208W.
This patch changes PsysPmax setting from 21.5W to 208W.
Change-Id: I43f4b00a54dc0dfe6bd690492f9ef92698c9b903
Signed-off-by: Lawrence Chang <lawrence.chang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|