| Age | Commit message (Collapse) | Author |
|---|
|
Anraggar cannot boot into OS and kernel loading failure.
Update eMMC DLL values to improve initialization reliability
- Sending different speed TX/RX command/data signal to eMMC and check
the response is success or not.
- Collecting every eMMC that use for the project
- Based on above result to provide a fine tune DLL values
BUG=b:308366637
TEST=Cold reboot stress test over 2500 cycles
Change-Id: I9ec3cc23000301aa72aed96e74b63114623c4fc2
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78851
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
OpenSIL has an API to call back into the host firmware to print to the
console.
These could be moved to a common directory when there are more openSIL
implementations to see if it is actually common.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I208eea37ffde64a2311cb9f51e2bcd1ac3dbad4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
As customer demand, it is necessary to set MSR Package Power Limit-1 to 17W for the DTT setting to optimize performance.
The PL1 value (17W) suggested by the thermal team which is different from the reference code(PL1=15W).
BUG=b:312321601
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Built and booted into OS, and confirm MSR PL1=17W correctly.
Change-Id: If7874d26038118c5605cf0721c30e681b45123fe
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79335
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves the SOC_INTEL_STORE_ISH_FW_VERSION config from the
Nissa baseboard to BOARD_GOOGLE_BRYA_COMMON. This allows all baseboards
to retrieve the ISH version and store it into memory.
Ensure SOC_INTEL_STORE_ISH_FW_VERSION is enabled only for platforms
with ISH support (DRIVERS_INTEL_ISH).
Additionally, the dedicated SOC_INTEL_STORE_ISH_FW_VERSION config
selection for the Nissa baseboard is no longer needed.
BUG=b:280722061
TEST=Able to build and boot google/marasov.
Change-Id: I99dab43ae4e13869b7f8797a9c4014f60e38a595
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79338
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change GPP_B14 from NC to NF
BUG=b:272447747
TEST=enable usb OC2 function to ensure USBA work normal
Change-Id: Ie0f112bcf183870869d0c1b9a223d4231600a300
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
On Brox, TPM is using i2c4 and GPP_E2, so modifying the Kconfig to
reflect this. Also, fixing up the TPM entry in the device tree.
Making sure that the GPIO for GSC_PCH_INT_ODL is set correctly.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I0ecaa6fcfc05c3c2e55f857d7a4e59fe46096bb5
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79102
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
We seem to be passing CPPFLAGS to linker in x86 arch
ramstage. This is superflous as these are only meant
to be compiler flags and should not be passed to the
linker.
Change-Id: Ia3cd51be6be252aa796191cf0d2cd91d393c8878
Signed-off-by: Srinivas Hegde <srinivashegde@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Select PSP_VERSTAGE_MAP_ENTIRE_SPIROM in Cezanne Kconfig instead of
common Kconfig.
BUG=None
TEST=Build BIOS image and boot to OS in dewatt.
Change-Id: I476971700824fed06d17000001afc075105fa1ee
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79306
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Earlier entire SPI ROM was mapped to memory. With limited TLB resources
in PSP, this approach hit the limit on systems using 32 MiB SPI ROM.
Therefore regions in SPI ROM were mapped on need basis. This works well
on Picasso, Mendocino and Phoenix SoCs. But unfortunately this causes
boot hangs in Cezanne SoC. Add a configuration to map the entire SPI ROM
and enable it in Cezanne SoC. For other SoCs, keep the configuration
disabled so that only the required SPI ROM region is mapped.
BUG=b:309690716
TEST=Build and boot to OS in both Dewatt and Skyrim.
Change-Id: I166ac7b50b367c067e1a743fc94686e69dd07844
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Updating from commit id e4519efca746 (2023-11-15):
Revert "picasso: Update PSP binaries to release 0.8.13.7B"
to commit id 68ebd4b567f4 (2023-11-27):
PCO: Update ABL to version CABLRV21080200
This brings in 1 new commit:
68ebd4b567 PCO: Update ABL to version CABLRV21080200
Change-Id: I4cf528c2d2489782758d2e16ea9201324c466919
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Select opensil & opensil_genoa. This enables openSIL for Genoa, allowing
the build to be tested.
Change-Id: I18379f311a56ff3f8b68d3c9a07a4f59de2d90b2
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
OpenSIL has a native buildsystem using meson and configuration mechanism
using kconfiglib.
To be able to use the coreboot toolchain with opensil, meson crossfiles
are used, which get generated by coreboot makefiles.
Configuration of opensil is done in a similar fashion with a template
defconfig after which kconfiglib is called to generate headers.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide2d181914116119dfd37b1511d89ea965729141
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76511
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Adjust ACPI DSDT to support ECAM resource above 4GB by modifying the PCI
ECAM Resource Consumption settings. The changes include specifying a
QWordMemory resource template, accommodating non-cacheable, read-write
attributes, and adjusting the address range.
Change-Id: Idb049d848f2311e27df5279a10c33f9fab259c08
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add taeko new supported memory parts in mem_parts_used.txt, generate
spd-3.hex for these parts.
1. Samsung K4UBE3D4AB-MGCL
2. Micron MT53E1G32D2NP-046 WT:B
BUG=b:312363368
TEST=Use part_id_gen to generate related settings
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I221ad3f490f24b43fe1ccd211014787eab5d1038
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
Drop code that puts Super I/O into config mode, select serial device,
then leave config mode right away having done nothing.
I'll also take this chance to revise its #includes based on
include-what-you-use results.
Change-Id: I304fc1610740375b59121b6b8784122440795838
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73693
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Board was not producing serial output until well into ramstage.
To fix, select SUPERIO_NUVOTON_COMMON_COM_A Kconfig to tell
nuvoton_enable_serial() to route serial port A signals to the outside,
not GPIO8x.
TEST=Full native raminit debug log received over serial by minicom.
Change-Id: I376a79dd76ffa5f4d47e7c0cb53680e173e1ad78
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79222
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enable BT audio offload of ALC1019_ALC5682I_I2S based on fw_config.
BUG=b:299510759
TEST=Build and boot to Screebo. Verify the config from serial logs.
w/o this CL -
```
[SPEW ] ------------------ CNVi Config ------------------
[SPEW ] CNVi Mode = 1
[SPEW ] Wi-Fi Core = 1
[SPEW ] BT Core = 1
[SPEW ] BT Audio Offload = 0
[SPEW ] BT Interface = 1
```
w/ this CL -
```
[SPEW ] ------------------ CNVi Config ------------------
[SPEW ] CNVi Mode = 1
[SPEW ] Wi-Fi Core = 1
[SPEW ] BT Core = 1
[SPEW ] BT Audio Offload = 1
[SPEW ] BT Interface = 1
```
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I6c713752f3f0bf58b5ebd78b904e773fdbf16e06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77755
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add PIXA touchpad for variants of craask.
BUG=b:310489697
TEST=build craask firmware and test with PIXA touchpad
Change-Id: I7e68a44eb3d639eaadb5b7b9cb5a6955fd059eeb
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
cmd and cmd_conf_cfg are necessary for `make menuconfig`
and `make nconfig`.
Change-Id: Ie16ef31a8e0137f3fd4129fb73ca6ef4669173cc
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79264
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I0b8419a8ad01d711362733e02ace89c48d2893b2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
This fixes commit 12ae850dfc1 which used the wrong symbol, and previous
versions of Kconfig didn't notice.
Change-Id: I7145fd81a30a1455a6dd2c7f24564956a116d180
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79263
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Upstream reimplemented KCONFIG_STRICT, just calling it KCONFIG_WERROR.
Therefore, adapt our build system and documentation. Upstream is less
strict at this time, but there's a proposed patch that got imported.
TEST=`util/abuild/abuild -C` output (config.h and
config.build) remains the same. Also, the failure type fixed in
https://review.coreboot.org/c/coreboot/+/11272 can be detected,
which I tested by manually breaking our Kconfig in a similar way.
Change-Id: I322fb08a2f7308b93cff71a5dd4136f1a998773b
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This follows commit c79e96b4eb3 which did the rename across the tree
except in these places. Remove the flag from CHROMEOS abuild builds
because it never really belonged there.
Change-Id: If98fa27f64d6b676d3edf68ba6fbaacf7ac422e4
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79258
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This follows commit 5e8c906 which removed the symbol. Since Kconfig
is going to become more strict about unknown symbols, fix it.
As the config file's name indicates that its sole purpose is to test
integration of FSP's CAR, just drop the configuration altogether.
Change-Id: Idde7bf590c935a83e8f85f7d0a8e4b6954702319
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This follows commit a96e66a76f2 which did the rename across the tree
except here. Since Kconfig is going to become more strict about unknown
symbols, fix it.
Change-Id: I3b855085d4be13622e8f38ff651d576e719b682c
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79256
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This follows commit 6615c6eaf79 which removed the symbol. Since Kconfig
is going to become more strict about unknown symbols, fix it.
Change-Id: I7b7f2e4c0774919a55083f7c5348f2b5031c8287
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This follows commit 88407bcd which removed the symbol. Since Kconfig
is going to become more strict about unknown symbols, fix it.
Change-Id: I19d26de8003c51437ea62e04083a14c3587a4665
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79254
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This follows commit e2d291b5 which removed the symbol. Since Kconfig
is going to become more strict about unknown symbols, fix it.
Change-Id: I838f98d07fc0448dda6c02b58d7c5639992c77a2
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79253
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This follows commit 238ff1e9c which did the rename across the tree
except here. Since Kconfig is going to become more strict about unknown
symbols, fix it.
Change-Id: Ic31b8ae353ec07e8b8adab46b604365be4be44d9
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Now that the 4.22 release tag has been added to git, update the release
notes with the final statistics and wording.
We also decided to add a fix submitted immediately after the 4.22
release was tagged into the release package and do a point release.
This also adds an expected date for the next release
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iae9653a275fcc1d11efbb88e12676f332be0a5dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79147
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changelogs:
* https://gcc.gnu.org/gcc-12/changes.html
* https://gcc.gnu.org/gcc-13/changes.html
Porting guides:
* https://gcc.gnu.org/gcc-12/porting_to.html
* https://gcc.gnu.org/gcc-13/porting_to.html
Change-Id: I4f2ed4de4811abaa13528906de71eee29a8f2910
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Also update the regular expression to find the genoa blobs.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iba0109c049019a22cba1e0358cedbd9c198c6569
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: If717d064d87b0045f276a4ee963db0a62230f5d8
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: Idbcd88165271b58ba3697c66df447af0b8b57b1b
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79181
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Minor bugfix, plus stuff that doesn't really affect us.
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: I0af0c2ae4cb11bb58457830ffcd8bb8c2422a3d1
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79180
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The upstream build system uses a newly introduced function `read-file`,
so copy that in from Linux 6.2.
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: Ic100bf189ebd3eaa0eb26904ae8602910329a180
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This also cleans up our patch queue.
TEST=`util/abuild/abuild -C` output (config.h and config.build) remains
the same
Change-Id: I79159130ba3515ede59e9fb9fbf087e2ed76257a
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
In nissa platform, we configured GPP_F17 as SCI+APIC to wake the system
and also generate IRQ to the IOAPIC. Currently, we set GPP_F17 to level
triggered and it causes AP (Application Processor) to keep sending
GET_NEXT_EVENT to EC during resume from suspend by connecting AC.
So we change GPP_F17 to edge triggered to avoid this condition.
BUG=b:308716748
TEST=Original failure rate was 7 out of 10 times and it reduced to
0 out of 60 times on six joxer systems.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I3ceb1dfce46376a6a9a8c6cb6d691d818a0a42ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79244
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add more packages which are useful for a coreboot development and build
environment and also make neovim the default editor.
Change-Id: Ied09a9b9500d85348fc9c3862247bd8b85e50b54
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77724
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When cleaning the sensitive data in the memory, we will want to prevent
zero out the content of tbb_buffer. Move the ttb_buffer to a standalone
section will simplify the problem.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Change-Id: I610276cbe30552263d791860c15e5ad9a201c744
Signed-off-by: Yi Chou <yich@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79078
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Without this it would use the exception handler from the previous
stage.
Change-Id: I79d875aca6cd0cffe482e4ebb5f388af0adf6aed
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68840
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Id9e4adcd976e1f56ef7f502d9df16dbefce95c3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79217
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Probe usb ports by FW_CONFIG setting to disable C1 port on quandiso new daughterboard without C1 port.
BUG=b:312094048
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I6f702f60c772176e80b3452bf957d10625564102
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79173
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable 3VSBSW# in NCT6779D super I/O like other variants in the family,
needed to maintain power to memory during S3 suspend. Without it
resuming totally fails.
(Enabling it in devicetree is OK; it needs not be done in early
board init.)
TEST=Resuming from S3 works.
Change-Id: Ia8059b2a263ab5c459e54685f046eeb913776473
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78205
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kevin Keijzer <kevin@quietlife.nl>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DPTF parameters were defined by the thermal team.
Based on thermal table in 290705146#comment17.
BUG=b:290705146
BRUNCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I02b4187000eec9990bf10a57875b23007f7bdd12
Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79183
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables the FSP (Firmware Splash Screen) rendering feature
for all Rex variants, including chromeboxes like Ovis. This will allow
users to see the FSP logo during the boot process.
BUG=b:284799726
TEST=Verify that the FSP logo is displayed during the boot process on
an google/ovis chromebox.
Change-Id: I73d82e16f70ffdc8cb168506c86d9c4e9a92c38d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Set pen detect pin to NC base on fw_config.
BUG=b:304680060
TEST=emerge-rex coreboot pass
Change-Id: Icf9171fca49cfed1a05a67ae7fc8d62b7e9630c9
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79213
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Genoa SoC has 6 I2C controllers. In order to support those, select
SOC_AMD_COMMON_BLOCK_I2C and implement the SoC-specific functions and
data structures needed by the common AMD I2C code. Since the common AMD
I2C code also reports if the controller is enabled or not in the SSDT,
change the corresponding DSDT code to use this information. In this
patch the I2C pad control registers don't get configured by coreboot yet
and we rely on ABL already having those set up correctly which seems to
be an assumption that the reference firmware is making too. PPR #55901
Rev 0.26 was used as a reference for the I2C controllers and the GPIO
pins being used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iebc10de6ea5c6d441cff04e016dcec62405078c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
The code for "phase 4" of firmware verification currently only sets a
recovery reason when there's an actual hash mismatch detected in
vb2api_check_hash_get_digest(). This is the most likely way how this
section of code can fail but not the only one. If any other unexpected
issue occurs, we should still set a recovery reason rather than just
reboot and risk an infinite boot loop.
This patch adds a catchall recovery reason for any error code that falls
out of this block of code. If a more specific recovery reason had
already been set beforehand, we'll continue to use that -- if not, we'll
set VB2_RECOVERY_FW_GET_FW_BODY.
Change-Id: If00f00f00f00aa113e0325aad58d367f244aca49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78866
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch tries to standardize and simplify the Kconfig option layout
for Google boards with MediaTek SoCs and align them to the scheme used
with other Arm-based Google boards.
Change-Id: I40880e7609ba703d0053ad01da742871e54d4e7a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79063
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
This patch unifies and simplifies the Kconfig selection model for the
Gru, Herobrine, Trogdor and Veyron boards according to the model
discussed in CB:78972.
Also add missing license headers to two Kconfig files while I'm here.
Change-Id: If679a05afd10869afba9c2a33b54862e102b5f40
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79022
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While transitioning the devicetree to make use of the chipset
devicetree, commit 3b5b9f4c543c ("mb/hp/280_g2: Make use of the chipset
devicetree") removed useful comments documenting the endpoints of the
root ports. Restore them.
Change-Id: I178cb472a8f40baaccc30514689bda2730dfa9dc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Updating from commit id 481ea7c:
2023-09-19 15:21:38 -0700 - (Move to RaptorLakeFspBinPkg.dec)
to commit id bb12f17:
2023-10-31 16:00:43 +0800 - (Elkhart Lake MR7 FSP)
This brings in 5 new commits:
bb12f17 Elkhart Lake MR7 FSP
0d6bf96 Elkhart Lake MR7 FSP
88845b6 IoT ADL-S MR6 (4115_09) FSP
8c99965 IoT ADL-P MR5 (4115_09) FSP
6c549ee IoT ADL-N MR2 (4282_00)
Change-Id: I9fe65d830061c93ceac549dc7f41e7a98646a0a3
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Some sensitive data may remain DMA buffer, we will want to zero out
everything on the DMA buffer before we jump into the kernel to
prevent leaking sensitive data into the kernel.
To accomplish that, we will need this function to get the range of
memory that can be allocated by the dma allocator.
BUG=b:248610274
TEST=emerge-cherry libpayload
BRANCH=none
Signed-off-by: Yi Chou <yich@google.com>
Change-Id: I8f3058dfd861ed44f716623967201b8cabe8d166
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch guarantees that non-ChromeOS platforms continue to enable
early caching.
ChromeOS devices, on the other hand, control this configuration through
the motherboard configuration based on the underlying SoC.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex.
Change-Id: I412b2b6a807dc0f5f2632f0fbd56bd37689dead3
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch enables the `SOC_INTEL_COMMON_BASECODE_RAMTOP` config
option for select mainboards, as not all board variants may want to
enable this config due to underlying SoC dependencies.
Mainboards that attempt to enable early caching have exhibited soft
hangs while switching between pre-RAM and post-RAM phases. This patch
allows mainboards to choose to enable this option without enabling
it by default (which could cause boot hangs).
Furthermore, it reorganizes the configuration options under
BOARD_GOOGLE_BASEBOARD_REX in alphabetical order for better readability.
BUG=b:306677879
TEST=Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for google/rex and
intel/mtlrvp.
Change-Id: If380c2ecbee4f6437c3d58bfb55be076a4902997
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Follow thermal validation, add ldo output select for speaker.
BUG=b:297298847
TEST=emerge-nissa and deploy to DUT to verify audio functionality.
Change-Id: Ie68f2b35f024b4dd066d831ae8fd5a662d407753
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This partially reverts commit f493857c9bc1 ("mb/google/brya/var/*: Set
dGPU/LAN/WLAN device type to generic"). Setting the LAN device type to
generic broke programming the LAN MAC address, so set it back to pci.
TEST=build/boot google/brya (osiris), verify LAN MAC address programmed
correctly.
Change-Id: I4fb43b7212e67b5c38724baad572860bc45b558e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79150
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This mostly reverts commit 6c705e766f7f ("mb/google/puff/var/*: Set
LAN/WLAN device type to generic"). Setting the LAN device type to
generic broke programming the LAN MAC address, so set it back to pci.
TEST=build/boot google/puff (wyvern), verify LAN MAC address programmed
correctly.
Change-Id: I558ae6dc1366d5a8a22e0383d7d597d15159df03
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I4dbe9b7a05171bb244ec1ebe6ce7d390a6373d61
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Arrange ACPI table enum in a vertical and alphabetized format.
This change aims to reduce conflicts between patches.
Change-Id: I192339df771d6a3ae67358fe46334fe2b216b974
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79099
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of using MSR IA32_PLATFORM_ID read the SystemAgent device id
to figure out the PC type. This follows the BWG which suggest to not
use MSR IA32_PLATFORM_ID for system identification.
Tested: Lenovo X220 still boots.
Change-Id: Ibddf6c75d15ca7a99758c377ed956d483abe7ec1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78826
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Now that those registers are only written once set the lock bit to
protect it from runtime changes.
TEST: Lenovo X220 still boots.
Change-Id: I4c56a3cb322a0e75eb3dd366808068093928e10c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Write MSRs that are in scope package only once by checking for the BSP
bit. While this improves performance a bit it also has the benefit
that registers can be safely locked down without the need for
semaphores.
TEST: Lenovo X220 still boots.
Change-Id: I43f5d62d782466d2796c1df6015d43c0fbf9d031
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
commit 1e9601c5ef80 ("nb/intel/sandybridge: Standardize MRC vs. native
SPD mapping API") introduced an uninitialized variable issue.
Change-Id: I41b081dc4c961acc04423067e29e0eabe5f17539
Found-by: Coverity CID 1524317
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79093
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Updating from commit id c59794a6:
2023-11-02 Nicholas Bishop sign_uefi: Support signing via pkcs11
to commit id f2b01bf0:
2023-10-27 Julius Werner firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
This brings in 66 new commits:
c59794a6 sign_uefi: Support signing via pkcs11
68d4aa4b sign_uefi: Skip private key check if it's a pkcs11 URI
6b9d624b sign_uefi: Pass each key path separately
483f65e4 sign_official_build.sh: properly show errors on loem issues
516ee7bc sign_uefi: Use named args instead of positional
0eec8e25 vboot_reference-sys: Switch from Command to bindgen::Builder
46f5aab8 image_signing: support multiple release names
f13af139 sign_official_build: Sudo invocation within bits of android signing
3f165374 futility: updater: Add optional serial number argument to --ccd
64379cc6 sign_official_build: add --debug flag
7160bf9f 2lib: Fix relocation issue when compiling locally with musl libc
0e27cdff vboot_reference-sys: Add vboot_host.h
2c82e73c Override use_apksigner FLAGS
b43469c7 futility/cmd_show: Support --publickey FW_VBLOCK
0eb4da96 tests/futility: Update kern_preamble.bin as kernel_part.bin
68a03355 tests/futility: Move test_show_vs_verify.sh into test_show_and_verify.sh
8daf1474 tests/futility: Move 'futility show' tests to a separate file
34190e3d futility: Exit with error when metadata hash verification not supported
967aa462 firmware/2lib: Fix function comment for vb2api_get_firmware_size()
f2b01bf0 firmware: Undeprecate VB2_RECOVERY_FW_GET_FW_BODY
ef6d02df futility/vb2_helper: Add missing newline for error messages
886d13d7 PRESUBMIT: switch to cros format
ac2e1a75 host/lib: Decouple openssl headers from HOSTLIB
86ec05f7 futility: updater: Add help info for --quirks
2850244e futility: updater: Abort if the unlock_csme_* is used on a locked device
f1b5c88d devkeys: delete old unused firmware_bmpfv.bin
4444c5fe crossystem: Fix tpm_fwver for fwid < 12935
98ef339f 2lib: Prevent overwriting the value of fw_vboot2
c7517eb4 make_dev_ssd: support ChromeOS Kdump
8e3462cc tlcl: Increase the TPM_BUFFER_SIZE
740a2966 vboot_reference: Drop 'host' usage for 'internal' in flashrom.h
57877a44 vboot: Remove comments about physical dev switch
3401d16c 2lib: Fix typos, comments and formats
fdf52d45 scripts/: Drop deprecated {g,s}et_gbb_flags.sh scripts
bf76e9ee 2lib: Output the correct kernel_version
1ac4663e make_dev_firmware.sh: update pattern for matching wp status
c57ab9f7 2lib: Add recovery reason VB2_RECOVERY_WIDEVINE_PREPARE
e094ba31 tlcl: Reduce the variants of TPM2B
b047600d sign_official_build: support key config for pkcs11
f8712b73 vboot: support signing with pkcs11 private key
17fe786f strip_boot_from_image.sh: sfill fast
6c856cd3 futility/updater: Fix EC software write protection logic
1dc5a421 futility: update: Deprecate --unlock_me by --quirk unlock_csme_nissa
f0d88587 futility: update: Refactor the 'unlock ME' quirk(s)
81429ee9 futility: update: Do not update RO when the AP RO is locked
a3beb737 futility: update: Revise the ordering or quirks
2c1844fa futility: update: Remove unused quirk 'unlock_wilco_me_for_update'
75530d32 tests/futility: Test with new signer_config.csv based firmware updater
cba649fa 2lib: Expose 2hmac
ab015448 2lib: Refactor hmac to vb2_hmac_calculate
3545f8b4 Revert "sign_uefi: Remove exception catching"
55f625a9 dump_fmap: Add offset and size to flash_ec format output
a27ee336 keygeneration: add shellcheck source statements to help linting
055f9aa2 keygeneration: replace_recovery_key.sh: make minios key optional
6cb8ab60 scripts: delete unused values kernel command line
1f76c38b vboot: Drop phone recovery support
ccf6b037 scripts: Legacy fix for set_gbb_flags.sh
8f03069e futility: Add basic README.md
88963df8 utility: Query platform wp status with futility
6c3817d2 utility: Drop cros_alias technical debt in dev_debug_vboot
df85f512 scripts: Drop cros_alias technical debt in make_dev_firmware.sh
7395cd68 futility/updater_utils.c: Match on EC path to prepare for split
52518415 crossystem: Recover corrupted RW_NVRAM on flash writes
81f9ddaf futility/cmd_gbb_utility.md: Add basic GBB subcmd doc
c4995268 futility/: Fix define confusion
69dab5a6 crossystem: Avoid writing duplicate entries to RW_NVRAM
6c37b520 Revert "crossystem: stop supporting legacy chromeos_acpi driver"
Change-Id: Ic7ecdabcdd26df349b8abf1c5a77c806facfe1d8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78865
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Check FW_CONFIG and disable gpios for HPS if HPS_ABSENT for skolas
and brya0 variants.
BUG=b:311740746
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas
to kernel and verify via "cbmem -c | grep HPS".
Change-Id: I8cbe4f40c41f1d06e8f511c3e88c05984566d441
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Check FW_CONFIG and disable gpios for LTE if LTE_ABSENT for skolas
and brya0 variants.
BUG=b:311459627
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas
to kernel and verify LTE gpios are disabled via "cbmem -c | grep LTE".
Change-Id: I3f3bc2b536babf71cc484cce02f96f47707f729c
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79122
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skolas uses brya0 schematic, so override tree should be almost the same
for brya0 and skolas. This change sync's the skolas overridetree.cb
with brya0's overridetree.cb.
BUG=b:311722825
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas to
kernel.
Change-Id: I14a2ed803a8ffb8614018af587c66034fb724b38
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This changes the path where go installs its packages.
Now the packages are not installed in the users home directory anymore.
This solution is not perfect though, since offline build are still not
possible, because go will fetch the packages at build time.
-modcacherw will create the go files with rw permissions, otherwise
coreboot is not able to delete the files afterwards (make distclean).
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2a35369628454057ea4758cd1225e57f07cb71c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
According to eDP panel datasheet[1], the eDP panel needs 0 <= x <=200ms
delay after VDD powering on. The MIPI panel[2] does not need this delay.
Move this delay to eDP path.
[1] NE135FBM-N41 V8.0 Product Spec_P2 20191025.pdf
[2] B5 TV110C9M-LL0 Product Specification Rev.P0
BRANCH=none
BUG=none
TEST=check FW screen
TEST=check timestamp
Before:
60:device initialization 696,422 (1)
15:starting LZMA decompress (ignore for x86) 696,587 (165)
16:finished LZMA decompress (ignore for x86) 696,675 (88)
17:starting LZ4 decompress (ignore for x86) 1,340,226 (643,551)
After:
60:device initialization 724,259 (1)
15:starting LZMA decompress (ignore for x86) 724,425 (166)
16:finished LZMA decompress (ignore for x86) 724,512 (87)
17:starting LZ4 decompress (ignore for x86) 1,168,176 (443,664)
Change-Id: I92bca5ec8269f4bad4dfab4ee193cdb5665de233
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79109
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
ChromeOS has switched to using the main branch, update accordingly.
BUG=b:294218930
TEST=None
Change-Id: I31f67ef4fb175a4e4896b5bed81d5ae1cdddb827
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79143
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
In preparation for the upcoming release, add the template for the
24.02 release and update index.md.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I694142c31ba684e7b94640d55302b2440e25619a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79073
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the HD audio controller in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the host bridge device operations
to the PCI device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and audio still works
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I9bbbe9f4490dc6fb21174d63d1c8906d69ea3ee0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79118
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the PCIe root ports in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the host bridge device operations
to the PCI device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and all PCIe devices on PCH are
visible and working.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I05bfe8db88fd54415f320f32ea147636ca4e0df8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since the integrated GPU is always function 0 of device 2 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the host bridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux and graphics works in UEFI
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I20e387e626e19dc441aceda18451186d1e86cd5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79114
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the host bridge is always function 0 of device 0 on bus 0, the
device operations can be statically assigned in the devicetree and
there's no need to bind the host bridge device operations to the PCI
device during runtime via a list of PCI IDs.
TEST=Lenovo X220 still boots to Linux
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: Icf3d9f8cd2be2f8ef71fd9fdb5f005f3b683332e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79113
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
While having select statements in Kconfig.name files is valid in the
syntax of the Kconfig language, having the selections split between the
normal Kconfig file and Kconfig.name files makes it harder to see what's
going on.
Kconfig.name files will now be limited to their original purpose of
selecting a particular board or board variant, not actually configuring
that board.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2aab78e296f2958e77a938b1afa40a25a6aa82b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Brox is using Ti50, so make sure that we set the right config for that.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: If4a16448eebc028b2989c1de150b9e0f9067ee92
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Assigning the macros in gpio.h to the correct GPIOs. Also, fixing GPE
configurations so that they are mapped to the proper wake sources
(GPP_B, D, E groups).
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I6320cd98e560e514e63c52e173cb7923cfd1cdee
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
We need to increase romstage size a little to make a compiler upgrade
fit (CB:70771). Unfortunately the end of the romstage directly touches
the QCSDI region in the current memlayout, and there is no other way
to reshuffle things to make more space... so we need to move QCSDI out
of the way. This means that anyone who is actually building this
platform with CONFIG_QC_SDI_ENABLE (which requires a proprietary blob
that's not publicly available) will need to recompile their QCSDI binary
to match the new start address.
Change-Id: Iaf13e4001b3c763e3ec59009779931ec75603d5d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79074
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
These should be the final release notes prior to tagging coreboot
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id723f8e1fc92ef1a36e877f48e594eef59b0ba8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79077
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
These perl modules are needed to run the coverage-report target for
gcov.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If32a42ce17edcbae94394f770c26d3300abebcbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79072
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the vboot board list for the 4.22 release.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I77c5ca2c2c36d8b1ddadad4f15d2d4148ff0b325
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I25b7adccf60abe515d129f8d00383165eccf6431
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79028
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I30a15277527a1e423691ff55ff11cc2136cefc90
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Building coreboot for the Qualcomm SoCs SC7180 and SC7280 requires to
include the Qualcomm blobs, which requires to accept their license.
However, for various reasons it makes sense to build without blobs, e.g.
static analysis or just build-testing.
So in order to do that, run the steps integrating the Qualcomm blobs
into the coreboot binary only if USE_QC_BLOBS is enabled and also remove
guards which prevent building related mainboards when USE_QC_BLOBS is
not enabled.
Change-Id: I249ac477b8f10e7fa0848e967c23a3b3b9bbd27d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79026
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the CPU and PCI domain operation bindings statically in the chipset
devicetree instead of adding them during runtime.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44fa57458c408e74a6341643620c5e9ac1817557
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Since this chip is a SoC and also to bring the chipset devicetree more
in line with the chipset devicetree of Sandy Bridge, merge the chip
operations of the northbridge's root complex and the northbridge itself
into one chip operations structure and use it at the top level of the
devicetree.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8b42bac07b1409bbc797bc4428cf9f84a40e94c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
BKDG #52740 Rev 3.05 was used as a reference for the SoC's various PCI
devices. The HDA controller in the FCH at function 2 of device 0x14 on
bus 0 was missing in the mainboard's devicetrees.
TEST=PC Engines APU2 still boots and doesn't show any new problems
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6970c2f6e6d661d40406586f4e6eeb05bcd07979
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79083
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
There's no need to remove the corresponding fields from the
device_operations struct when HAVE_ACPI_TABLES isn't selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iac20b6cdc44a5280566ee7003a5ef6fbe913b099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78990
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's no need to remove the corresponding fields from the
device_operations struct when GENERATE_SMBIOS_TABLES isn't selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa24d1fd211c263b788046e63de3dd5c54cba801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Configure I2S1 and I2C5 for ALC5650 to support beep sound in
depthcharge.
BRANCH=corsola
BUG=b:305828247
TEST=Verify devbeep in depthcharge console
Change-Id: Ibd098adb8d5568ad338bbfece0edfd0c38cbf854
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79064
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I92d5497644338927b81fbabea2bce45f1e59f0b4
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Morphius boards using pre-v3.6 schematics don't have a dedicated GPIO
for touchscreen power/enable, and so fail with runtime detection
enabled. Since it only has one touchscreen option, and no SKUs lack a
touchscreen, we can safely assume it is present in all cases.
TEST=build/boot morphius w/4k screen, verify touchscreen enabled in
cbmem and functional in Linux and Windows.
Change-Id: I13e07e14b5a18fa1dd3b18950cf46e9d7821eedc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Leaving the user as coreboot caused the entrypoint to run as coreboot,
which means we couldn't mount directories or run sshd correctly.
Switching to root at the end of the file fixes this.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie10e1d7ad4def0faafe3bcd580a77e23c3bfe948
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79067
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards (e.g. prodrive/hermes) that do not provide their own FMAP
and therefore have been generated by the build system (+ ifdtool)
experience a failure when trying to build with an IFD that contains
regions which do not have equivalent fmap names (set to NULL).
Therefore add a NULL check for the fmapname and ignore the region if we
do not have an fmapname.
Test: compile prodrive/hermes
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ib4589b7fdbd11d644214ca5601536e9aeb26882f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
ab9b64ac4c Add a host command to print info about AP-firmware state
The original include/ec_cmd_api.h version in the EC repo is:
ab9b64ac4c Add a host command to print info about AP-firmware state
BUG=b:300525571
BRANCH=none
TEST=none
Change-Id: I3570e073a91621cb1d28a24aa35c1f4beedceaab
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79066
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Returning a NULL device name can cause issues if something else does
handle it.
E.g. UART and GNA devices on Intel Alder Lake-N cause
INTERNAL_POWER_ERROR BSOD's in Windows when enabled due to invalid
packages being created from a NULL name
Test: build/boot google/nissa (craaskvin) to Win11
Change-Id: I0679147ad3e330d706bbf97c30bc11b2432e2e8a
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Appears to not be used under Windows, Linux, or ChromeOS, and causes
high CPU usage at idle under Windows.
BUG=none
TEST=build/boot Win11, Linux on google/frostflow, verify camera shutter
function unchanged, CPU usage under Windows idles where expected.
Change-Id: I8a6ea3b886766bdb055b40949c75bec0264eecc5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
