| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I93c16b563c7a4f4c653d2ebfd001170cb0fca82e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ia087b62904fd515bf73960a188b225f1d49197dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65646
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alder Lake-N based nissa boards use compressed ME_RW blobs for CSE FW
Update. Choose SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE Kconfig to perform
CSE FW sync in ramstage.
BRANCH=firmware-brya-14505.B
TEST=Perform CSE FW upgrade/downgrade on nivviks.
Change-Id: I00630096c52434f44914f3ae82ff043ecf77b80d
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65368
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
When compressed ME RW blobs are used for CSE FW update, it has to be
loaded into memory to decompress. So perform CSE FW update in ramstage.
Alder Lake-N based nissa boards use compressed ME RW blobs to save on
SPI flash size. Enable CSE FW update in ramstage.
BRANCH=firmware-brya-14505.B
TEST=Perform CSE FW update on nivviks and verify upgrade/downgrade
works.
Change-Id: Ide9471146d186dca11fb020e5006eeaa01442669
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some Alder Lake-N boards will use compressed ME RW blobs to obtain
savings on the SPI size (1916KB before compression, ~1132KB after
compression). So add an additional check before calling
cse_fw_sync() from romstage. When compressed blobs are used, the call to
CSE firmware update has to be in post-RAM stages.
BRANCH=firmware-brya-14505.B
Change-Id: I0d9ede52cb493974e4ba6e2e2cf11c9789b3b087
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63760
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I9f0fcf52b6b7d622e4fd182e007de6401856c7fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65645
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of trying to update the submodules, then skipping each update if
git is not present, just don't try to update the submodules at all.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I83ef48a21820c0983e38823331c9ba0fe0fc277f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
To configure the clangd plugin for various editors, The command
'bear -- make' is used to generate the compile_commands.json.
The clangd plugin creates a .cache directory under inside coreboot.
Just ignore both of these.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic844f807ab48597b8aae29bb64ab16d6c8dff217
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
There is no longer any information printed when updating submodules, so
on the initial build, this can lead to a long delay without explaining
what's going on.
Just add an information line that the submodules are being updated so
that the user can see what's happening.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I987e50b99e39b976bc8367525549153e1eba69cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I2d99523647dfb43265db8f2701b525afd1870fc5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch enables X2APIC to avoid hang-ups due to
`Switching from X2APIC to XAPIC mode is not implemented.`
BUG=b:237924211 ([MTL-FSP][v2222.1] Lists of boot issue with MTL FSP)
TEST=Able to enable X2APIC on rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I58649a9a6c9c0ba86856f6aa5fb470e2ef774e90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65617
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I2360a1a79f07ff8466ed01aa7f180d410e019292
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Set tcc_offset value to 0 in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:236294162
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I8d4c631e07873923226683c8aa0cf36cb872e2d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I068c6e46d85d869afc72280509a03d5ff682b917
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65618
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define the CCD (aka "Webcam") USB port in the devicetree as
it is used in multiple places. It is used in devtree to
disable it based on the CMOS setting "webcam", and in the
devicetree to configure the port tuning.
This also corrects the port that is disabled on CML, from
usb2_port[6] to usb2_port[3].
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16e368fc7965f978f2302633122ba63038603c1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64704
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Group the USB ports by hardware ports, rather than separate USB 2.0 and
3.0 interfaces.
This also removes usb3_port[2] as it is not connected and fixes the labelling of usb3_port[0] and usb3_port[1].
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7923fc00c36687a7f89d863eb0ea4e01a036502d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Update the Vbt to disable the fixed mode feature, to allow for
bootloader resolutions higher than 1920x1080.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibd9850dcaef97a58c6694ee594014e9f16ae7f96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=check gpios are locked in pinctrl dump.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ieed2d40b0222d8c8c193e0590131f83a5d96add9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=check gpios are locked in pinctrl dump.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I61931b0b2f1f936a672e72c98b83d66ba0059bf3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This patch sets the Power Limits and Voltage Regulator settings for
three RaptorLake SKUs (45W, 28W and 15W) following the guidance from
document 686872 (June 7th edition).
BUG=b:237809660
TEST=Power Limit and VR serial logs review + debug instrumentation
SKUs successfully booted
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7e9d4039615e6c33b869c6243efbfeb2259ac219
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65582
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In reality the expression should not overflow as the value
fits in 32 bits.
Change-Id: I50d83dce25a4d464e1c979502c290d8ecd733018
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
mch_id is set to zero and then unnecessarily tested.
TEST=build and boot image on ADL RVP board
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I4f48742b04edd50fbc0db342b563534e709d6fdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Platform with public FSP hooked-up have an additional parameter
to control CNVi WiFi with CnviWifiCore UPD.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I19efb645fbe1530a571c92d0573c1c60ff6605a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update 3rdparty/fsp submodule to include AlderLake FSP.
Hook up the Kconfig settings to point to Fsp.fd and headers for
ADL-S and ADL-P platforms which the FSP has been published for.
The FSP binaries are compliant with the specification revision 2.3
so update these settings accordingly.
Although FSP header is v2.3 compliant, the features set of the FSP
v2.3 is not being met.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I577931da7952b681534bb78b7b2c7683cd99febd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65519
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for primus board. Please refer Intel doc#723158 for
more information.
BUG=b:237725329
TEST=Verify the build for crota board
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I6dde74c098ba57b7cd66ce7b9ee941b8961ad20c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Cyan Yang <cyan.yang@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Modify GPIOs according to SOC_GPIO_Table_0629.xlsx.
- GPP_A21 from TCP_DP1_CTRLCLK to NC
- GPP_A22 from TCP_DP1_CTRLDATA to NC
- GPP_E20 from NC to TCP_DP1_CTRLCLK (Native Function 1)
- GPP_E21 from NC to TCP_DP1_CTRLDATA (Native Function 1)
BUG=b:237468533
TEST=emerge-brask coreboot
Change-Id: I8e7d343731efbfc04304d52a3493ab30b8a739b0
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
There is a requirement that the TPM RST signal cannot be asserted by
software. On nissa this is PLT_RST_L, so lock this pin to prevent it
being reconfigured as a GPIO.
BUG=b:216671701
TEST=Try to change GPP_B13 from the kernel:
$ echo 677 > /sys/class/gpio/export
$ echo out > /sys/class/gpio/gpio677/direction
$ echo 0 > /sys/class/gpio/gpio677/value
$ echo 1 > /sys/class/gpio/gpio677/value
GSC console doesn't show "PLT_RST_L ASSERTED" / "PLT_RST_L DEASSERTED"
Change-Id: Id5d64b4b028e4f63c4acb05cd8632d0642866688
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65591
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add G2 touchscreen support for craaskvin.
BUG=b:235919755
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I7ade3ac1d135b8b21b09ef335ab7b30ae7a5e2c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Set the GPIO configuration of joxer
BUG=b:237628218
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I1f7529342fc0800878f875d3641a2f93fbe6009a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Move watchdog functionality to common folder.
BUG=b:221393157
TEST=None
Signed-off-by: Kshitiz Godara <quic_kgodara@quicinc.com>
Change-Id: Ib2f7f21ce991fd8193329e7b8260e58e47bf39c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch uses ACPI _PLD macros to add custom values for USB ports.
C0 A2 A3
+----------------+
| REAR |
| |
| |
| |
| FRONT |
+----------------+
A1 A0
BUG=b:232419500
TEST=emerge-brask coreboot
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I5ada4e9b25102a9cfd3b02a2abcd956f6cbc5619
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Won Chung <wonchung@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Branding changes to unify and update Chrome OS to ChromeOS (removing the
space).
This CL also includes changing Chromium OS to ChromiumOS as well.
BUG=None
TEST=N/A
Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
CPUID_RAPTORLAKE_P_Q0 is ES. Add it to generate is_es = 1 in ACPI
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Booted to OS on adlrvp + rpl silicon
Signed-off-by: zhixingma <zhixing.ma@intel.com>
Change-Id: I67d70dc7e916a4818869aef86e7e642b66ea5dae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Create PSP NVRAM and RPMC NVRAM region with size 128K & 64K
respectively, which are supported region by the PSP.
moved CBFS up due to build error, CBFS need not to be at the end the flash for amd Zen cpu.
Change-Id: Ide778c61a755697c1bef1eaa87f2976d8ff12eb6
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change adds new Rembrandt SoC support by defining it as base SoC
of sabrina as sabrina is derived from Rembrandt SoC.
All the needed changes for Rembrandt SoC will be applied under
SOC_AMD_REMBRANDT config.
Change-Id: I1c9392918cc2c6b511d467f99aceefc725750ce6
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for kano board. Please refer Intel doc#723158 for
more information.
BUG=None
TEST=Verify the build for kano board
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I19430a68e1e847e71382781563200a4c88f37a59
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Fill GPIO table for Pujjo.
BUG=b:235774770
TEST=emerge-nissa coreboot
Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I307b8460632f1feae9591200057c0e6471cbab24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65104
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This updates the ACPI locations of Type-C ports.
BUG=b:232806406
TEST=none
Change-Id: Ia15e09a58c731a1364a994fadf8df39115fbe7c4
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add mainboard folder and drivers for new reference board 'Geralt'.
TEST=saw the coreboot uart log to bootblock
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I5e437d46097369bef535ff64e6a693b7cf67f2f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65586
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
|
|
Add new folder and basic drivers for Mediatek SoC 'MT8188'.
Difference of modules including in this patch between MT8188 and
existing SoCs:
Timer:
Similar to MT8195 and MT8186, MT8188 uses v2 timer.
EMI/PLL/SPI:
Different from existing SoCs.
The implementation is based on these files:
MT8188G_Application Processor Technical Brief_v0.4.pdf
MT8188G_Functional Specification v0.4.pdf
MT8188 Application Processor Registers-1.pdf
MT8188 Application Processor Registers-2.pdf
TEST=saw the coreboot uart log to bootblock
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3320f3d49a9b9ed781ceb812e4341e379db4ac20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65585
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
|
|
This patch assigns FSP handler event for FSP-M and FSP-S with coreboot
romstage and ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER
Kconfig is enabled.
BUG=b:237263080
TEST=Able to build and boot MTL simics. Also, verified the FSP debug
log is using coreboot debug library as below:
Before:
Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE
Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3
Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A
The 0th FV start address is 0x000F961B000, size is 0x00150000, handle
is 0xF961B000
Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38
Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6
With this code change:
[SPEW ] Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE
[SPEW ] Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3
[SPEW ] Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A
[SPEW ] The 0th FV start address is 0x000F95C0000, size is 0x00160000, handle is 0xF95C0000
[SPEW ] Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
[SPEW ] Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38
[SPEW ] Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I80ba73afed642e6d21c5310e9bf734f6f7170347
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch adds below UPDs into the existing FSP partial header v2222.1
FSP-M UPD:
DisableMc0Ch0
DisableMc0Ch1
DisableMc0Ch2
DisableMc0Ch3
DisableMc1Ch0
DisableMc1Ch1
DisableMc1Ch2
DisableMc1Ch3
DdrFreqLimit
GpioOverride
SerialIoUartDebugMode
SerialDebugMrcLevel
SmbusDynamicPowerGating
WdtDisableAndLock
SaIpuEnable
SkipCpuReplacementCheck
TcssDma0En
TcssDma1En
VtdBaseAddress
CpuCrashLogDevice
CpuCrashLogEnable
LCT
TdcEnable
TdcTimeWindow
Lp5CccConfig
RMTBIT
RmtPerTask
RMTLoopCount
MrcFastBoot
EnCmdRate
SaGvGear
TAT
PchHdaVcType
BdatTestType
RdEnergyMc0Ch0Dimm1
RdEnergyMc0Ch0Dimm0
CorePllVoltageOffset
RdEnergyMc1Ch1Dimm1
RdEnergyMc1Ch1Dimm0
DciEn
PchPort80Route
ActEnergyMc0Ch1Dimm1
ActEnergyMc0Ch1Dimm0
HeciCommunication2
PcdSerialDebugBaudRate
HeciTimeouts
ThrtCkeMinDefeatLpddr
PchPcieHsioRxSetCtle
BdatEnable
DisableCpuReplacedPolling
PchSataHsioRxGen1EqBoostMagEnable
CoreVoltageOffset
PchPcieHsioTxGen1DownscaleAmp
PchHdaDspUaaCompliance
VddVoltage
WRVC1D
PreBootDmaMask
tWR
RingVoltageAdaptive
PchSataHsioTxGen3DeEmphEnable
PchPcieHsioRxSetCtleEnable
RingPllVoltageOffset
OcSupport
WrEnergyMc0Ch0Dimm1
PdEnergyMc1Ch1Dimm1
PdEnergyMc1Ch1Dimm0
DmiGen3ProgramStaticEq
SmramMask
tRAS
PerCoreHtDisable
IdleEnergyMc1Ch0Dimm0
IdleEnergyMc1Ch0Dimm1
Gen3LtcoEnable
tWTR
RCVET
DmiGen3UsPresetEnable
tCWL
PwdwnIdleCounter
WRTC1D
CLKTCO
PrimaryDisplay
DisableMessageCheck
tFAW
PchSataHsioTxGen2DeEmphEnable
SerialIoUartDebugRtsPinMux
GtExtraTurboVoltage
TXTCO
PchSataHsioTxGen3DownscaleAmp
CpuRatioOverride
PostCodeOutputPort
DmiHweq
CoreVfPointCount
NModeSupport
Ddr4DdpSharedZq
RdEnergyMc1Ch0Dimm0
RdEnergyMc1Ch0Dimm1
PchSataHsioTxGen2DownscaleAmp
DebugInterfaceEnable
WrEnergyMc0Ch1Dimm0
WrEnergyMc0Ch1Dimm1
SaPllVoltageOffset
DmiGen3EndPointPreset
PchSataHsioRxGen2EqBoostMag
VDDQT
PvdRatioThreshold
CoreVfPointOffsetMode
DmiGen3DsPortRxPreset
BclkRfiFreq
SmbusArpEnable
PowerDownMode
DebugInterfaceLockEnable
RingVoltageOffset
EnableExtts
SerialIoUartDebugCtsPinMux
PchPcieHsioTxGen2DownscaleAmpEnable
Avx2VoltageScaleFactor
GearRatio
GtVoltageOverride
EccSupport
RingMaxOcRatio
TrainTrace
EnablePwrDn
IsTPMPresence
OcLock
DmaBufferSize
SOT
CoreVfPointRatio
PchPcieHsioTxGen2DownscaleAmp
TjMaxOffset
CoreMaxOcRatio
RingDownBin
PchSataHsioRxGen1EqBoostMag
BiosAcmSize
tRFC
PchPcieHsioTxGen1DownscaleAmpEnable
PdEnergyMc0Ch1Dimm0
PdEnergyMc0Ch1Dimm1
RDMPRT
TxtLcpPdBase
CMDVC
SerialIoUartDebugBaudRate
PchTraceHubMemReg1Size
CoreVoltageOverride
McPllVoltageOffset
PdEnergyMc1Ch0Dimm0
PdEnergyMc1Ch0Dimm1
GttMmAdr
PchPcieHsioTxGen1DeEmphEnable
ApStartupBase
CoreVoltageAdaptive
GtVoltageMode
PcieImrRpSelection
TxtLcpPdSize
PchPcieHsioTxGen2DeEmph3p5
ThrtCkeMinTmr
RealtimeMemoryTiming
UserBudgetEnable
PchPcieHsioTxGen3DownscaleAmpEnable
GmAdr
PchSataHsioTxGen1DeEmphEnable
CrashLogGprs
tRTP
RMC
PchSataHsioTxGen3DownscaleAmpEnable
RDODTT
RDVREFDC
PerCoreRatio
IdleEnergyMc0Ch1Dimm1
tRCDtRP
DidInitStat
SerialIoUartDebugRxPinMux
SerialIoUartDebugMmioBase
BiosSize
MmioSizeAdjustment
PchTraceHubMode
DmiGen3Ltcpre
CoreVoltageMode
DmiGen3UsPortTxPreset
Gen3EqPhase3Bypass
BclkSource
KtDeviceEnable
DciUsb3TypecUfpDbg
CoreVfPointOffset
Gen3RtcoRtpoEnable
TotalFlashSize
BclkAdaptiveVoltage
TvbRatioClipping
EnablePwrDnLpddr
WRTC2D
RankInterleave
PchSataHsioRxGen3EqBoostMag
IdleEnergyMc0Ch0Dimm1
IdleEnergyMc0Ch0Dimm0
Ratio
JWRL
Avx3RatioOffset
Avx2RatioOffset
RDVC1D
DCC
PchSataHsioTxGen2DeEmph
ExitOnFailure
IdleEnergyMc1Ch1Dimm1
IdleEnergyMc1Ch1Dimm0
RingVoltageOverride
SpdProfileSelected
ScramblerSupport
SaGvFreq
WRVC2D
DmiGen3EqPh3Method
CMDSR
RdEnergyMc0Ch1Dimm0
RdEnergyMc0Ch1Dimm1
UserThresholdEnable
ThrtCkeMinDefeat
DmiGen3EqPh2Enable
tRRD
ChHashEnable
BistOnReset
ChHashInterleaveBit
RemapEnable
RDVC2D
DIMMRONT
WrEnergyMc0Ch0Dimm0
DmiAspm
PchPcieHsioTxGen2DeEmph6p0Enable
PchSataHsioTxGen1DeEmph
RDEQT
TxtDprMemoryBase
WrEnergyMc1Ch0Dimm1
WrEnergyMc1Ch0Dimm0
DmiGen3EndPointHint
CleanMemory
PchSmbAlertEnable
SaOcSupport
PchSataHsioTxGen3DeEmph
TxtImplemented
CoreVfPointOffsetPrefix
PchHdaTestPowerClockGating
DmaControlGuarantee
DIMMODTT
ERDMPRTC2D
RootPortIndex
SkipStopPbet
VtdIopEnable
DmiGen3DsPortTxPreset
ActiveCoreCount
PchLpcEnhancePort8xhDecoding
GtVoltageOffset
DisPgCloseIdleTimeout
ActEnergyMc1Ch0Dimm1
ActEnergyMc1Ch0Dimm0
Idd3n
Idd3p
PchSataHsioTxGen1DownscaleAmpEnable
BClkFrequency
ActEnergyMc0Ch0Dimm0
ActEnergyMc0Ch0Dimm1
DdrFreqLimit
Gen3EqPhase23Bypass
WrEnergyMc1Ch1Dimm0
DmiGen3DsPresetEnable
PcieImrSize
EWRTC2D
IbeccOperationMode
VtdBaseAddress
TvbVoltageOptimization
DciDbcMode
HobBufferSize
PchHdaSdiEnable
PcieImrEnabled
IdleEnergyMc0Ch1Dimm0
SerialIoUartDebugAutoFlow
tCL
PdEnergyMc0Ch0Dimm1
PdEnergyMc0Ch0Dimm0
RDTC2D
ERDTC2D
SerialIoUartDebugParity
PchPcieHsioTxGen2DeEmph3p5Enable
PchPcieHsioTxGen1DeEmph
DmiGen3Ltcpo
PchSmbusIoBase
RaplPwrFlCh1
RaplPwrFlCh0
EnhancedInterleave
PchPcieHsioTxGen2DeEmph6p0
MemTestOnWarmBoot
Ibecc
PanelPowerEnable
BiosAcmBase
DmiGen3UsPortRxPreset
DmiAspmL1ExitLatency
CmdMirror
PchSataHsioTxGen2DownscaleAmpEnable
tREFI
CpuBclkOcFrequency
CridEnable
EpgEnable
SmbusSpdWriteDisable
DdrSpeedControl
PchSataHsioRxGen2EqBoostMagEnable
GtMaxOcRatio
DmiMaxLinkSpeed
PchSataHsioRxGen3EqBoostMagEnable
PcieImrRpLocation
CmdRanksTerminated
SkipMbpHob
SerialIoUartDebugTxPinMux
PchSataHsioTxGen1DownscaleAmp
PchPcieHsioTxGen3DownscaleAmp
PerCoreRatioOverride
PchHdaAudioLinkDmicClockSelect
SerialIoUartDebugDataBits
SrefCfgEna
Avx512VoltageScaleFactor
MmioSize
SaVoltageOffset
SaIpuEnable
ActEnergyMc1Ch1Dimm0
ActEnergyMc1Ch1Dimm1
ProbelessTrace
VtdIgdEnable
ALIASCHK
PchTraceHubMemReg0Size
DIMMODTCA
TgaSize
EWRDSEQ
SerialIoUartDebugStopBits
RDTC1D
CMDNORM
RingVoltageMode
EnableAbove4GBMmio
WrEnergyMc1Ch1Dimm1
Txt
PcieMultipleSegmentEnabled
CnviDdrRfim
FSP-S UPD:
CpuMpPpi
LidStatus
ITbtConnectTopologyTimeoutInMs
D3HotEnable
D3ColdEnable
PchLockDownGlobalSmi
PchLockDownBiosInterface
PchUnlockGpioPads
RtcMemoryLock
SkipPamLock
EndOfPostMessage
CpuUsb3OverCurrentPin
PcieRpHotPlug
SerialIoUartAutoFlow
TccActivationOffset
VmdEnable
Enable8254ClockGating
Enable8254ClockGatingOnS3
HybridStorageMode
PcieRpHotPlug
Hwp
Cx
PsOnEnable
EnergyEfficientTurbo
PchPmDisableEnergyReport
UfsEnable
FspEventHandler
GnaEnable
VbtSize
PcieComplianceTestMode
CStatePreWake
SerialIoUartDataBits
SataPortsExternal
CstateLatencyControl0TimeUnit
SataP0Tinact
PmcV1p05PhyExtFetControlEn
ApIdleManner
SataPortsSpinUp
DisableProcHotOut
ITbtPcieTunnelingForUsb4
SerialIoUartDmaEnable
SaPcieItbtRpNonSnoopLatencyOverrideMode
SaPcieItbtRpSnoopLatencyOverrideMode
MlcSpatialPrefetcher
PchXhciOcLock
PmcPowerButtonDebounce
TccOffsetClamp
LogoPixelWidth
AvxDisable
Custom1PowerLimit1
Custom1PowerLimit2
PmcCpuC10GatePinEnable
PchPmSlpStrchSusUp
IshI2cSdaPadTermination
Custom2PowerLimit1Time
RtcBiosInterfaceLock
WatchDogTimerBios
SataP1TDisp
PchPciePort8xhDecodePortIndex
PcieRpImrSelection
TcCstateLimit
PchS0ixAutoDemotion
PchFivrExtV1p05RailEnabledStates
PcieRpSlotPowerLimitScale
IshUartCtsPinMuxing
PcieRpSnoopLatencyOverrideMode
TTCrossThrottling
PsysPowerLimit1
SataRstInterrupt
IshSpiClkPadTermination
PcieEnablePeerMemoryWrite
SataP1T2M
ChipsetInitBinPtr
LogoPixelHeight
PsysPowerLimit1Time
HwpInterruptControl
DevIntConfigPtr
IshUartRtsPadTermination
PsysPowerLimit1Power
EnergyEfficientTurbo
Custom3TurboActivationRatio
PcieDpc
TurboMode
PchFivrExtVnnRailSupportedVoltageStates
ITbtDmaLtr
IshSpiClkPinMuxing
PchSbAccessUnlock
PcieRpSystemErrorOnCorrectableError
PcieRpSlotPowerLimitValue
SendEcCmd
SataSpeedLimit
SataRstPcieEnable
PchUsb3HsioCtrlAdaptOffsetCfg
SataP0T2M
PchHdaVerbTableEntryNum
DmiTS1TW
DmiTS2TW
PcieRpImrEnabled
GpioIrqRoute
SataPortsSolidStateDrive
RaceToHalt
PcieRpNonSnoopLatencyOverrideMultiplier
PcieRpUnsupportedRequestReport
AesEnable
PchFivrExtVnnRailSxVoltage
SataP1Tinact
PkgCStateUnDemotion
SataPortsZpOdd
PchSerialIoI2cPadsTermination
PchFivrExtV1p05RailSupportedVoltageStates
PchUsbLtrLowIdleTimeOverride
IshSpiMosiPinMuxing
PchProtectedRangeLimit
SaPcieItbtRpNonSnoopLatencyOverrideValue
SataP1T3M
PchPmWoWlanEnable
IshUartRtsPinMuxing
SataLedEnable
VmdGlobalMapping
PcieRpEnableCpm
IshGpGpioPadTermination
PchDmiCwbEnable
ForcMebxSyncUp
FspEventHandler
PchFivrExtVnnRailIccMax
PchPmMeWakeSts
DisableD0I3SettingForHeci
PcieRpNonSnoopLatencyOverrideMode
PmgCstCfgCtrlLock
PchUsbLtrHighIdleTimeOverride
Usb3HsioTxRate2UniqTran
SiNumberOfSsidTableEntry
IshSpiMisoPadTermination
IshUartRxPadTermination
PcieRpSlotImplemented
PchUsbOverCurrentEnable
EndOfPostMessage
SaPcieItbtRpSnoopLatencyOverrideValue
EnableHwpAutoEppGrouping
SerialIoUartDbg2
ConfigTdpLock
EsataSpeedLimit
PchTsnEnable
PowerLimit3DutyCycle
TTSuggestedSetting
PchEnableDbcObs
IehMode
VmdPort
PchFivrExtVnnRailCtrlRampTmr
PchPmSlpAMinAssert
CstateLatencyControl5TimeUnit
ProcessorTraceEnable
ChipsetInitBinLen
PchTemperatureHotLevel
Usb3HsioTxRate3UniqTranEnable
NumberOfEntries
Custom2ConfigTdpControl
PowerLimit3Lock
SiCustomizedSsid
PchUsb3HsioFilterSelP
DisableVrThermalAlert
PchIoApicEntry24_119
SmbiosType4MaxSpeedOverride
PowerLimit3Time
C1StateUnDemotion
PchDmiAspmCtrl
PchUsb3HsioFilterSelN
PchTTEnable
PcieRpNoFatalErrorReport
Custom1ConfigTdpControl
PmcC10DynamicThresholdAdjustment
PchFivrVccinAuxRetToLowCurModeVolTranTime
BiProcHot
VmdPortFunc
PchUsb3HsioFilterSelNEnable
PchHdaVerbTablePtr
TurboPowerLimitLock
PcieRpSystemErrorOnNonFatalError
PmcUsb2PhySusPgEnable
PcieRpSystemErrorOnFatalError
PchProtectedRangeBase
VccSt
PchFivrExtVnnRailSxEnabledStates
EnableHwpAutoPerCorePstate
CstateLatencyControl1TimeUnit
SaPcieItbtRpSnoopLatencyOverrideMultiplier
PchPmSlpS4MinAssert
PcieRpTransmitterHalfSwing
Usb3HsioTxRate3UniqTran
RenderStandby
ProcessorTraceOutputScheme
SkipFspGop
PchHdaPme
EcCmdProvisionEav
BgpdtHash
Usb3HsioTxRate0UniqTran
UsbOverride
PkgCStateDemotion
EnableAllThermalFunctions
PchPmWolEnableOverride
IshSpiCsPinMuxing
PchIshSpiCsEnable
IshUartCtsPadTermination
PmcV1p05IsExtFetControlEn
MaxRingRatioLimit
PchIshPdtUnlock
IshUartTxPinMuxing
PchFivrExtV1p05RailIccMax
BiosGuardAttr
LogoPtr
CpuBistData
ShowSpiController
PchPmWolOvrWkSts
SataP0T1M
CstCfgCtrIoMwaitRedirection
TcoIrqEnable
PchHdaLinkFrequency
ITbtForcePowerOnTimeoutInMs
SerialIoSpiCsEnable
VmdMemBar2Base
TStates
SiSkipSsidProgramming
TccOffsetTimeWindowForRatl
AmtSolEnabled
PchUsb3HsioCtrlAdaptOffsetCfgEnable
PchFivrExtVnnRailIccMaximum
PchEspiLgmrEnable
SkipPamLock
IshGpGpioPinMuxing
PchUsb3HsioFilterSelPEnable
PchFivrExtVnnRailVoltage
SataPortsDevSlpResetConfig
ProcHotLock
PchDmiTsawEn
SerialIoSpiCsPolarity
PkgCStateLimit
EnableRsr
PmcDbgMsgEn
PchPmPwrCycDur
NumOfDevIntConfig
SerialIoSpiDefaultCsOutput
PchPmPciePllSsc
PxRcConfig
CstateLatencyControl4TimeUnit
PcieRpPmSci
ConfigTdpBios
PmcPdEnable
PchT1Level
PmcModPhySusPgEnable
DisableTurboGt
EnableTcoTimer
IshSpiMisoPinMuxing
IshI2cSclPinMuxing
PcieRpCorrectableErrorReport
C1StateAutoDemotion
PchEspiLockLinkConfiguration
PchFivrExtV1p05RailCtrlRampTmr
SataRstPcieStoragePort
PchFivrExtV1p05RailVoltage
PchPmSlpSusMinAssert
PchHotEnable
PcieRpNonSnoopLatencyOverrideValue
TcoIrqSelect
PcieRpCompletionTimeout
FwProgress
StateRatioMax16
ConfigTdpLevel
IshI2cSdaPinMuxing
PcieRpPhysicalSlotNumber
SerialIoUartParity
TxtEnable
PchLegacyIoLowLatency
PchUsbLtrMediumIdleTimeOverride
PchPmPmeB0S5Dis
SerialIoUartPowerGating
PcieRpSnoopLatencyOverrideValue
PchPmSlpLanLowDc
PchT2Level
CstateLatencyControl2TimeUnit
PchPmSlpS3MinAssert
PchUsb3HsioOlfpsCfgPullUpDwnResEnable
MonitorMwaitEnable
Usb3HsioTxRate1UniqTran
Eist
IshSpiMosiPadTermination
PowerLimit4Lock
Custom3PowerLimit1Time
PcieEnablePort8xhDecode
DualTauBoost
WatchDogEnabled
MaxRatio
Custom2TurboActivationRatio
PchFivrExtVnnRailEnabledStates
ApplyConfigTdp
IshI2cSclPadTermination
PowerLimit2Power
ThermalMonitor
CpuUsb3OverCurrentPin
PchTTLock
Custom1PowerLimit1Time
PchEspiHostC10ReportEnable
Usb3HsioTxRate2UniqTranEnable
SataPortsInterlockSw
EnablePerCorePState
PsysPowerLimit2Power
UfsEnable
PchPmDisableNativePowerButton
VmdVariablePtr
Custom3PowerLimit2
PchPmDisableEnergyReport
Custom3PowerLimit1
DmiTS3TW
EnforceEDebugMode
CstateLatencyControl3TimeUnit
VmdCfgBarBase
DmiSuggestedSetting
SataPortsEnableDitoConfig
SerialIoUartBaudRate
Usb3HsioTxRate1UniqTranEnable
SataPortsHotPlug
MachineCheckEnable
Custom1TurboActivationRatio
Custom2PowerLimit1
Custom2PowerLimit2
VmdMemBar1Base
SaPcieItbtRpLtrConfigLock
SataP0TDispFinit
PchFivrExtVnnRailSxIccMaximum
PchTsnLinkSpeed
SataThermalSuggestedSetting
SaPcieItbtRpLtrEnable
TimedMwait
PchTsnMultiVcEnable
PcieRpFunctionSwap
PcieEqOverrideDefault
SataP1T1M
PsysPowerLimit2
PchLanLtrEnable
SerialIoUartStopBits
SciIrqSelect
C1e
PchFivrExtVnnRailSxIccMax
PowerLimit3
PowerLimit2
PowerLimit1
MeUnconfigOnRtcClear
PcieRpPcieSpeed
PchUsbLtrOverrideEnable
UsbPdoProgramming
Custom3ConfigTdpControl
SataP1TDispFinit
PchFivrDynPm
VmdPortDev
EnableItbm
MinRingRatioLimit
PcieRpFatalErrorReport
MctpBroadcastCycle
EcCmdLock
StateRatio
PchPmVrAlert
DmiTS0TW
LogoSize
PchIoApicId
SaPcieItbtRpForceLtrOverride
PcieRpSnoopLatencyOverrideMultiplier
IshUartTxPadTermination
PchCrid
SataRstPcieDeviceResetDelay
ProcHotResponse
BltBufferSize
MlcStreamerPrefetcher
PcieRpLtrConfigLock
SiSsidTablePtr
SataP0TDisp
PchUsb3HsioOlfpsCfgPullUpDwnRes
BltBufferAddress
PcieRpDetectTimeoutMs
PpinSupport
SataRstRaidDeviceId
PchPmLatchEventsC10Exit
IshUartRxPinMuxing
PpmIrmSetting
EnergyEfficientPState
PchFivrExtV1p05RailIccMaximum
PortResetMessageEnable
PchReadProtectionEnable
BiosGuardModulePtr
PchWriteProtectionEnable
AmtEnabled
PchHdaCodecSxWakeCapability
SiCustomizedSvid
PcieEdpc
TccOffsetLock
PchPmPwrBtnOverridePeriod
SaPcieItbtRpNonSnoopLatencyOverrideMultiplier
WatchDogTimerOs
PchTTState13Enable
PowerLimit1Time
PchT0Level
IshSpiCsPadTermination
SataP0T3M
Usb3HsioTxRate0UniqTranEnable
SataTestMode
PmcOsIdleEnable
PowerLimit4
PcieRpAcsEnabled
PavpEnable
UsbTcPortEn
Additionally, optimize the `reserved` fields across header files.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I976a5762701711fbf000c43c5ff05f9bd93f688f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch ensures AP UART messages are coming over LPSS UART 0 hence,
select required kconfig and program both early and late UART
RX/TX GPIOs accroding to the rex schematics dated 06/27.
BUG=b:224325352
TEST=Able to see AP UART log over LPSS UART0.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7daa8200d1a7cf825dfdfed538573efd57ab2d97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65454
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the support LP5 RAM parts for rex:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
BUG=b:224325352
TEST=emerge-rex coreboot
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibcd25ae80d625b623b9a78ff2cd4447e85831cc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65476
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add memory init with placeholder to fill in required memory
configuration parameters. DQ map and Rcomp can be auto probed by
the FSP-M hence, kept it as default.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Able to boot till FSP-M/MRC using MTL simics.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5baa87411c28a20602eb5a7077f00664ccab3ade
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64850
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SMI handler implementation to manage power cycle,
power state transition and Chrome EC events.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I10aab8257fce92aaf913a53c0c9fb6c1a4f5dea6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64623
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable building for Chrome OS and add associated ACPI configuration.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I75cb2d30d699166a056ed9d3c0779816b733b0d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64621
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Perform EC initialization in bootblock and ramstages. Add associated
ACPI configuration.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2ea934f32b34bc43650e20dd2736f4e652004dc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64622
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ACPI configuration and add DSDT ACPI table.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I8374a9b528f8dff4e23b6bdb4d1368dfd2c79b8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64620
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add stubbed out GPIO configuration and perform GPIO initialization
during bootblock, romstage and ramstage.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I51426f9557dafc357fc54a971b6f76fac5323e0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64593
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add entry point stubs of each stage for Rex. More functionalities will
be added later.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I2310e58ab92bdb0ce86a9f7284cc0b3e04a2889f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64591
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 32MB flashmap descriptor as below:
Descriptor Region -> 0 - 0x3fff (~16KB)
CSE Partition -> 0x4000 - 0x8fffff (~9MB)
BIOS Region -> 0x900000 - 0x1ffffff (23MB)
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia5ced770bb02c11a9ab39837e66562d2ee22b6e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This commit is a stub for rex, which is a an Intel Meteor Lake-P
reference platform.
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I46bd8d47b370cacbe0a09bbeaccacf7f1d51d8b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62969
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add definitions for the GPIO pins on Meteor Lake SoC,
as well as GPIO IRQ routing information and supporting ACPI ASL.
For now, add the following GPIO communities and GPIO groups:
Comm. 0: GPP_CPU, GPP_V, GPP_C
Comm. 1: GPP_A, GPP_E
Comm. 3: GPP_H, GPP_F, SPI0, VGPIO3
Comm. 4: GPP_S, JTAG
Comm. 5: GPP_B, GPP_D, VGPIO
BUG=b:224325352
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I7fe9654f22b074a9af18eb7bcdc21812dee77035
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64169
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Not all of the fields of the amd_cb_config structure were properly
initialized. Rather than initialize each field individually, initialize
the entire structure to 0.
TEST: Boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia343f01bce3956d66d01ce485b43963193c9df31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
These are architectural and followup works will address
the VGA MMIO and/or ASEG better.
Change-Id: I88e1dca8058661e31ba934b9860751e13a107108
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55928
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for primus board. Please refer Intel doc#723158 for
more information.
BUG=b:237421399
TEST=Verify the build for gimble board
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ie66c9679c985215ad7f1a5ae76560b839ea95702
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65474
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For ipq806x this fixes two resources getting declared
with same index. The latter previously overwrote former.
Change-Id: Ifee321d930d5433c824e2e977f1bb455766582f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ifb47e0d1d1b9c01c1332af4135f5578160c491a8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
In ADL-N, cse_fw_sync is done in ramstage. Compile debug_feature.c in
ramstage to fix build error.
BRANCH=firmware-brya-14505.B
Change-Id: I0118b024fce4781cf6008b1c0b416e409fc52065
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63979
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I86423c45ca33a79d3d8cf8e4ca4737da94a4aa4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
In the CSE FW update flow, update is triggered when there is a mismatch
in CSE versions. CSE RW blob is directly mapped from SPI flash, hashed,
compared and then the CSE RW region is updated. However, in the case of
compressed blobs, we cannot directly map the blobs from SPI. It needs to
be decompressed before the hash is calculated and compared. Add a check
for compressed blobs and figure out whether it needs to be directly
mapped from SPI or loaded into memory allocated for file in CBMEM, with
the provided CBMEM ID.
BRANCH=firmware-brya-14505.B
Change-Id: I3bc7708c95272e98702bc25b2334e6e64a93da8a
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CSE FW sync is currently performed in romstage, when uncompressed ME_RW
blobs are used. When compressed blobs are used, this has to be done in
post-RAM stages. Add Kconfigs to describe when the CSE FW sync will be
performed, in romstage or in ramstage.
BRANCH=firmware-brya-14505.B
Change-Id: Iac37aaa5ede5e1cd2d76a58ce2db9cb5b8f42398
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65366
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
cbfs_unverified_area_cbmem_alloc() expects a tag id to allocate space
to decompress ME_RW blobs within the CBMEM area, add a tag id for it.
BRANCH=firmware-brya-14505.B
Change-Id: I32f44496d389e3a7e4f2573ee4e46a145f7cd927
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Kingler and Krabby's rev 0 boards both have Cr50 instead of Ti50. In
order to support them with the new firmware where TPM_GOOGLE_TI50 is
selected, use the board rev to determine the EC-is-trusted logic.
BUG=b:237355198
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: I7797eafaa7a35355d241c4ea425a4716a35a7817
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This change copies ec_commands.h directly from the ChromiumOS EC repo,
with the exception of changing the copyright header to SDPX format.
Update to commit SHA1 2cbf6fbf (ec_commands: Drop VBNV read/write
support).
BUG=b:178689388
TEST=none
BRANCH=none
Change-Id: I74fa8b1171ca109dee163a7657659cdac1687450
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65469
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CB:63368 added a workaround of driving EN_PP3300_WLAN_X low in bootblock
to prevent a kernel crash on warm reboot. The crash has been fixed in
the kernel, so remove the workaround.
Kernel fix:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3463465/
BUG=b:225261075
TEST=Wifi works on nereid, warm reboot doesn't crash the kernel
Change-Id: Idb5547e65ea934954326fcc740b14a83c939432e
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
It seems fixup or adjustment addition for relocation type
EFI_IMAGE_REL_BASED_DIR64 is missing in the fsp rebasing code. The
patch address the miss. Without extending the fixup for the relocation
type, build system throws warnings during the rebasing of FSP-M and
FSP-S blobs which are built with 64bit.
Portion of build output containing warning with debug enabled cbfs lib:
...................................................
E: file offset: 9218
E: file type = 4
E: file attribs = 0
E: section offset: 9230
E: section type: 12
E: TE image at offset 9234
E: TE Image 0xffed80d4 -> 0xff256234 adjust value: ff37e000
E: Relocs for RVA offset 12000
E: Num relocs in block: 18
E: reloc type a offset f40
E: Unknown reloc type: a
Portion of build output after fix:
..................................
E: file offset: 9218
E: file type = 4
E: file attribs = 0
E: section offset: 9230
E: section type: 12
E: TE image at offset 9234
E: TE Image 0xffed80d4 -> 0xff256234 adjust value: ff37e000
E: Relocs for RVA offset 12000^M
E: Num relocs in block: 18
E: reloc type a offset f40
E: Adjusting 0x7f2e7f377024 ffee9192 -> ff267192
E: reloc type a offset f48
TEST: Integrate FSP blobs built with 64 bit and do boot test.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I894007ec50378357c00d635ec86d044710892aab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65383
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fixes a bug in Makefile.inc.
BUG=b:236576117
BRANCH=None
TEST=emerge-nissa coreboot
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I2664df961a1fc0cd904a5e742face20c3fc8c3c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65450
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Debug FSP is ~850KiB larger than release FSP and we don't have
sufficient space for nissa flash layout.
Remove RW_LEGACY and split them into RW_SECTION_A/B so we can have a
room for it.
Note: This fmd will only used for internal testing/debugging and not for
the firmware in released devices.
BUG=b:231395098
TEST=build with CONFIG_BUILDING_WITH_DEBUG_FSP
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Idb17f003285575e80feb86bb292b95daf0f5b3b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Intel FSP has "debug" build which is not public, used for debugging by
approved developers. Add a Kconfig to indicate that coreboot is building
with debug version of FSP so we can adjust few things (i.e. flash
layout) in the case.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ibc561498d7edcb9d7ec155f090822f1eb25d10cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65466
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Add chipset devicetree and power limits for AlderLake-S platform.
Based on Intel docs #619501, #619362 and #626343.
Change-Id: I1dd72465c458b718ecfcb29c2f7e433a63b89807
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
|
|
Change-Id: I422ece7b64bf81bcc75a414fd27f15ec330d40be
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Reverting commit 1e25fd426ad8 ("soc/amd/common/block/psp: introduce
AMD_SOC_SEPARATE_EFS_SECTION").
A better solution was used in commit c17330c1dddb ("mb/amd/chausie: Add
EC blob into CBFS"), and this is no longer necessary.
TEST: Boot chausie
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I27a8622a1f0d871690b181a79adca225a20996ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add ADL-S specific table with IRQ constraints to avoid accessing
non-existent devices.
Also when using debug FSP, silicon init would assert on assigning IRQs
for non-existent devices. This patch fixes the problem.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib4464a85bc11a8603bf471ea348bbfc9481db4aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Due to incorrectly interpreted DOC #630603, the reserved range
remains the same for all ADL platforms and is sync with
src/soc/intel/common/block/acpi/acpi/northbridge.asl which defines the
range as 0xfc800000-0xfe7fffff. The range 0xfe000000-0xfe7fffff was
only mean for static allocations, but the rest is also reserved. The
only difference between ADL-S and other ADL platforms is Trace Hub
base.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9b1f79cc351de422acf182c27870c29dbe57fe4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Disabling the ASPM for I225V will cause I225V suspend fail, so remove ASPM_DISABLE for I225v.
BUG=b:235565637
TEST=emerge-brask coreboot and check LAN_I225V sku can boot into OS.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Id4505a713a3d92cb66c189cc2963111b6e90f092
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add fingerprint device and select UART_ACPI driver.
Disable FPMCU until the proper boot segment initializes it.
BUG=b:228271993
BRANCH=NONE
TEST=Can add fingerprints and unlock the device using them.
Signed-off-by: Moises Garcia <moisesgarcia@google.com>
Change-Id: I71e1c7d654395284cdec43bb6e5f581e546da36a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65299
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The `limit` field for the PMC fixed BAR was incorrectly set to the `base
+ size + 1`, where it should be `base + size - 1`, to correctly tell the
allocator the limit.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Icf51333f438ce2597c008b48305cf5816dacd3f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65461
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `limit` field for the PMC fixed BAR was incorrectly set to the `base
+ size + 1`, where it should be `base + size - 1`, to correctly tell the
allocator the limit.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib2d8c7ffe87fdd970f3172bb4e6b2c9386859ab3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65460
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DDR interfaces emit electromagnetic radiation which can couple to the
antennas of various radios that are integrated in the system, and cause
radio frequency interference (RFI). The DDR Radio Frequency Interference Mitigation (DDR RFIM) feature is primarily aimed at resolving narrowband RFI from DDR4/5 and LPDDR4/5 technologies for the Wi-Fi high and ultra-high bands (~5-7 GHz). This patch sets CnviDdrRfim UPD and enables CNVI DDR RFIM feature for Nivviks variant.
Refer to Intel doc:640438 and doc:690608 for more details.
BUG=b:237238786
BRANCH=None
TEST=Build and boot Nivviks.
- Verified that Wifi DDR RFIM Feature is enabled and DDR RFI table can be modified.
Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Change-Id: Iea5c6e0c404efb8231321701ea9282347e01f75d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Based on latest schematic:
1. Update devicetree for USB port description
2. Add touchscreen ILITEK, amplifier ALC1019, codec ALC5682
3. Configure GPIO table to reflect that
4. Remove APW8738BQBI IC so set "disable_external_bypass_vr to "1"
BUG=b:235303242, b:236791101
BRANCH=dedede
TEST=build
Change-Id: I38c8c5b913013d818ac6a26284184c9decdd9f4e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65079
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kernel driver will en/disable the IRQ when suspend/resume. If lock
the pin, driver can't change the status which causes the unexpected
behavior. Device will wake when insert the pen. This is workaround
until we figure out the correct setting for driver.
BUG=b:233159811
TEST=Pen garage wake event work as expected.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ifc7b1e52a24c0e7bd54664d59870cb09536ef868
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65380
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:231690996
TEST=gpios are the same in kernel pinctrl dump.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I67a466fac478b2a3a682451174fbdcdd67816769
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Based on schematic and gpio table of pujjo, generate overridetree.cb
settings for pujjo.
BUG=b:235182560
TEST=FW_NAME=pujjo emerge-nissa coreboot chromeos-bootimage
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I47b10d03798004d1f3e398070acb2cbad46900b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Change-Id: I0b9bd00a5de4c2c8d91fa9d595d3ee313356048a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
List of changes:
1. Select common ACPI Kconfig to include common ACPI code block
from IA-common code
2. Select ACPI Kconfig support for wake up from sleep states.
3. Add SoC ASL code in ASL 2.0 syntax for SoC IPs like IPU, ISH,
LAN, HDA etc.
BUG=b:224325352
TEST= Build 'util/abuild/abuild -p none -t google/rex -a -c max'.
Change-Id: Iebe3d38f50e202d75add88f336b5f3e9ba9f5a22
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64168
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Add required SoC programming till ramstage
2. Include only required headers into include/soc
3. Fill required FSP-S UPD to call FSP-S API
BUG=b:224325352
TEST= Build 'util/abuild/abuild -p none -t google/rex -a -c max'.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: Ie746c0bfcf1f315a4ab6f540cc7c4933157551d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63364
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Default VBOOT_HASH_BLOCK_SIZE is 1 KiB and increasing it to 4 KiB
helps in improving overall boot time since it reduces hashing and
body loading time (~30ms).
Backport changes from commit hash 84532dae1 (soc/intel/alderlake:
Change VBOOT_HASH_BLOCK_SIZE to 4 KiB).
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3784b99bf06e0c03d123f290a98a0b1e4528b8d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64792
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Add required SoC programming till romstage
2. Include only required headers into include/soc
3. Fill required FSP-M UPD to call FSP-M API
BUG=b:224325352
TEST=Build 'util/abuild/abuild -p none -t google/rex -a -c max'.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I3d5c6ceb7f97429ff903e7577186e8d8843c1f14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63363
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the
skolas4es variant.
BUG=b:230773725
TEST=None
Change-Id: I12b05cdacdd26bfffff47b7a3fb127aa7778f15d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65493
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`chipset_lockdown` is no longer configured in this devicetree.
Change-Id: Iaaacd471ab873f150d7a74bba612130c33641c64
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
|
|
Add Raptor Lake specific CPU, System Agent, PCH, IGD device IDs.
References:
RaptorLake External Design Specification Volume 1 (640555)
600/700 Series PCH External Design Specification Volume 1 (626817)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Booted to OS on adlrvp + rpl silicon
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I8e8b9ec6ae82de7d7aa2302097fc66f47b782323
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65117
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic2b9a22bc6c32030f960d59b2874be5459c3ba28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Code taken from TGL base.
TEST=Boot MSI PRO Z690-A WIFI DDR4 and see all devices have SSID
applied
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3a6d299ec40bac8e29d06926572e375d7d835e29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The temperature values were taken from guybrush as a starting point for
skyrim.
BUG=b:230428864
TEST=Boot skyrim to OS and verify thermal zones are populated and
working in /sys/class/thermal/
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6669b32f5e3dd63c6523f74166089eb4eb2d7848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Follow google stylus spec. The Stylus-Present GPIO MUST be a wake
pin that interrupts the system in active operation when the stylus
is removed. After confirmed with the owner, the expect behavior is
only wake when eject the pen.
BUG=b:233159811
TEST=EC wake event work as expected.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7a82e5e8935c9ea27e923661f66809e9169bc86a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65379
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Add MIPI WFC based on schematics
BUG=b:236576117, b:235446911
BRANCH=None
TEST=emerge-nissa coreboot
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I85bd2ba187729a55c00369b218ca0414e0162b9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Follow latest schematic to modify SPI flash to 16M.
BUG=b:236576117
BRANCH=None
TEST=emerge-nissa coreboot
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I56be68b962c38d3f885dcf25a0251b8d9ab6ff3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65446
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This replaces IORESOURCE_SUBTRACTIVE with IORESOURCE_RESERVE.
Change-Id: Ib3d934ca704273daacbeb3c52412bf04e2be7217
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64695
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
