summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-05mb/system76/lemp9: Don't enable unused USB3 portFelix Singer
Don't configure USB3 port 4 since it's not used. Change-Id: I6919f5ec3a5be53373f2ab75063764287b53baf5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Michael Niewöhner
2020-09-04libpayload/xhci: Fix Slot State field width definitionCaveh Jalali
According to the xHCI spec, the Slot State field in the Slot Context Data Structure is 5 bits wide. So, fix the code to match. ref. xHCI spec 1.2 section 6.2.2, Figure 6-2: Slot Context Data Structure BUG=none TEST=xHCI compiles Change-Id: I0ae735af3d0840aeee846fa939c37af9aea3dff1 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45023 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-04mb/*/Kconfig: Drop redundant 'select CPU_INTEL_HASWELL'Elyes HAOUAS
CPU_INTEL_HASWELL is already selected at nb/intel/haswell/Kconfig. Change-Id: I608286aae72bc740be642a72109472fb235f37bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-04soc/intel/{jasperlake,tigerlake}/Kconfig: Drop redundant 'select ↵Elyes HAOUAS
CPU_INTEL_COMMON_SMM' CPU_INTEL_COMMON_SMM is set to yes if CPU_INTEL_COMMON at cpu/intel/common/Kconfig. Change-Id: I7c8e1bb6b7c3199a24711b64a6cbba4de190c6d9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-04soc/intel/cnl: Enable HECI3 depending on devicetreeFelix Singer
Currently HECI3 gets enabled by the option Heci3Enabled, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the HECI3 controller. All corresponding mainboards were checked if the devicetree configuration matches the Heci3Enabled setting, and divergent devicetrees were adjusted. Change-Id: Ic7d52096aee225c2ced1e1bc29ca850fe5073edc Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44579 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-04mb/google/volteer/variant/lindar: Update memory settingsRasheed Hsueh
Based on the Lindar's schematic, generate memory settings. util: rename lp4x spds to include "lp4x-" in name BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: Rasheed Hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I1ec35d62f8ed21356329b78a614114edad78c2bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Michael Niewöhner
2020-09-04soc/intel/tigerlake: Remove unused PID_SDX macroSubrata Banik
Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I177a146643f2196018182502fff8d82830e139dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-03soc/amd/picasso/acpi: Remove padding in IVRS table caused by realignment.Jason Glenesk
Previous CL (1916f8969b10e27fe06b3e0eb1caae632bd947f6) misinterpreted spec as requiring size alignment on all IVHD device entries. The correct requirement specifies only for 4-byte entries. The unneeded realignments result in gaps in the table. The kernel hangs in early boot due to the malformed table. Remove 8-byte entry alignment. BUG=b:166519072 TEST=Boot fully to morphius board with and without amd_iommu kernel parameter. Confirm IVRS contains no alignment gaps/corruption. Change-Id: Iddcff98279be1d910936b13391dd2448a3bb2d74 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-09-03soc/amd/picasso: Set max_speed_mts and configured_speed_mtsRob Barnes
ddr_frequency is deprecated. Set max_speed_mts and configured_speed_mts instead. This will result in SMBIOS type 17 displaying more accurate speed information. BUG=b:167218112 TEST=Boot ezkinil and observe dmidecode -t17 dmidecode -t17 # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x000B, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: SODIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR4 Type Detail: Synchronous Speed: 3200 MT/s Manufacturer: Unknown (0) Serial Number: 00000000 Asset Tag: Not Specified Part Number: MT40A512M16TB-062E:J Rank: 1 Configured Memory Speed: 2400 MT/s Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1879676ea9436b6d19c768f1b78487a4e179f8d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44984 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03memory_info: add max_speed_mts and configured_speed_mtsRob Barnes
ddr_frequency is ambiguous and is interpreted differently in several places. Instead of renaming this field, this deprecates it and adds two new fields with unambiguous naming, max_speed_mts and configured_speed_mts. smbios.c falls back to using ddr_frequency when either of these fields are 0. The same value was being used for both configured memory speed and max memory speed in SMBIOS type 17, which is not accurate when configured speed is not the max speed. BUG=b:167218112 TEST=Boot ezkinil, no change to dmidecode -t17 Change-Id: Iaa75401f9fc33642dbdce6c69bd9b20f96d1cc25 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44549 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03soc/intel/cnl: Allow using the remaining Comet Lake FSPsFelix Singer
To allow using the 3 remaining Comet Lake SoCs, add a new Kconfig option for each of them and configure the paths to FSP header files and FSP binary. Change-Id: I4272a6ee08e19769a8a17c93bb3ce2421be0bbc9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Michael Niewöhner
2020-09-033rdparty/fsp: Update submodule pointer to current masterFelix Singer
Change-Id: I50bac5a70425495832649e0d6d6e91aad623f25c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-03soc/intel/cnl: Add new Kconfig option which matches its FSPs nameFelix Singer
Since there are 4 different versions of FSPs for the Comet Lake platform, add a new Kconfig option for the currently used SoC being able to differ between the various SoCs and FSPs. The new Kconfig option selects the Comet Lake SoC as base for taking over its specific configuration and is only used for configuring the path to its specific FSP header files and FSP binary. Also, adjust all related mainboards so that their Kconfig selects the new option. For details, please see https://github.com/intel/FSP/tree/master/CometLakeFspBinPkg Built System76/lemp9 with BUILD_TIMELESS=1 before and after this patch and both images are equal. Change-Id: I44b717bb942fbcd359c7a06ef1a0ef4306697f64 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-03mb/google/volteer/variants/volteer: route GPP_F14 via APICAlex Levin
GPP_F14 should be configured to be routed via APIC and not SCI. BUG=b:162528549 TEST=verified on a volteer Change-Id: Ie262ceeaea1c07bcc99e1545f5eb99e0d0dee905 Signed-off-by: Alex Levin <levinale@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44948 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03crossgcc: Ensure that GMP is built for a generic CPU on x86Patrick Georgi
While GMP supports fat builds on x86 that adapt to the CPU's capabilities, by default it builds for the CPU of the builder. Running that binary on an older CPU then can fail. Change-Id: Iafdc2eb696189b9e2c5ead316f310d98c949ef74 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45044 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03soc/amd/picasso: Only build PSP bootloader & verstage into ROMartin Roth
The PSP bootloader and verstage are only used out of the RO region, so don't build them into the RW sections. BUG=None TEST=Build & Boot BRANCH=zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ic7bcb9a6a78926325e80755c010bb047e4a9485c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Eric Peers <epeers@google.com>
2020-09-03soc/amd/picasso: Add config for PSP verstage signing tokenMartin Roth
This allows a platform to specify the location of the signing token for the PSP verstage, and build it into the firmware image. BUG=b:166108929 TEST=Build file into PSP firmware, verify that it's present and has the correct ID. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I182ad9b48a2776ccd29ead0f54cfe14c5bf45560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Eric Peers <epeers@google.com>
2020-09-03soc/amd/picasso: Allow use of pre-built PSP verstageMartin Roth
To use a signed PSP verstage, we're going to need to build it first, then sign and store the binary. This patch allows the stored (signed) verstage binary to be used. BUG=b:166108929 TEST=Build with existing verstage binary instead of re-building it. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5cbceca3b75f05c5460190b1c829d1ffaab2c736 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Eric Peers <epeers@google.com>
2020-09-03util/amdfwtool: Add PSP verstage signature entryMartin Roth
Add the field for the PSP verstage signature entry. This adds the public key signing token to the PSP Directory table to verify the signed PSP verstage binary BUG=b:166100797 TEST=Build in a file and verify that it's present with the correct ID. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I7525045d8746b6857979d07b02758ab4d4835026 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Eric Peers <epeers@google.com>
2020-09-03util/amdfwtool: Fix warning taking address of packed struct memberMartin Roth
GCC9 introduced a new warning [-Waddress-of-packed-member]. This is giving the following warning when building amdfwtool: warning: taking address of packed member of ‘struct _bios_directory_entry’ may result in an unaligned pointer value. Looking at the definition of the struct, it looks like this is probably true. Since the function being called doesn't read from the values, zeroing them out in the beginning of the function, the code just passes pointers to the temporary variables without initializing them. BUG=None TEST=Build & use AMD firmware table. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I2f1e0aede8563e39ab0f2ec6daed91d6431eac43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Eric Peers <epeers@google.com>
2020-09-03soc/amd/picasso: Move DRAM end to after transfer bufferJosie Nordrum
Move PSP_SHAREDMEM_DRAM_END after _etransfer_buffer to ensure that the transfer buffer actually lives within the 32KiB that is supported to be transferred. Resulting symbol address change in bootblock.debug file summarized below. BEFORE: 02011000 T _psp_sharedmem_dram 02011000 T _transfer_buffer 02011000 T _transfer_info 02011040 T _etransfer_info 02011040 T _vboot2_work 02014040 T _evboot2_work 02019000 T _epsp_sharedmem_dram 02019000 T _preram_cbmem_console 0201a600 T _epreram_cbmem_console 0201a600 T _timestamp 0201a800 T _etimestamp 0201a800 T _fmap_cache 0201ac52 T _efmap_cache 0201ac52 T _etransfer_buffer AFTER: 02011000 T _psp_sharedmem_dram 02011000 T _transfer_buffer 02011000 T _transfer_info 02011040 T _etransfer_info 02011040 T _vboot2_work 02014040 T _evboot2_work 02014040 T _preram_cbmem_console 02015640 T _epreram_cbmem_console 02015640 T _timestamp 02015840 T _etimestamp 02015840 T _fmap_cache 02015c92 T _efmap_cache 02015c92 T _etransfer_buffer 02019000 T _epsp_sharedmem_dram BUG=b:167243965 BRANCH=None TEST=checked 'cbmem -1' for FMAP error after ec reboot Signed-off-by: Josie Nordrum <josienordrum@google.com> Change-Id: I9b482aced5deb40bd87d19d9c42585d8a6db5fc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45045 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03mb/google/zork: update DRAM table for berknipKevin Chiu
Add Dual DDR4 Samsung K4AAG165WA-BCTD 16Gb x 8 BUG=b:165956925 BRANCH=zork TEST=1. gen part id by gen_part_id 2. emerge-zork coreboot Change-Id: Ia21a561e9b89feeccb6509d9280eaf52cfc2f5a3 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-03trogdor: Assert EN_PP3300_HUBJulius Werner
Some Trogdor variants power their USB hub from a PMIC LDO that is already enabled by QcLib, and some have a discrete LDO that is controlled by GPIO_84. For the latter, let's make sure we assert that GPIO on boot. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I9d206cd7154ded3bf179e68c2b1421d0a8ee89f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: mturney mturney <mturney@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-09-03trogdor: Shuffle RAM and SKU ID pins (again)Julius Werner
We're moving a lot of pins around on Trogdor again. For firmware this only affects the RAM and SKU strapping ID pins. Since there are quite a few of the old devices in circulation this time and some people seem to care about mosys RAM information working, let's actually check the board revision and support both cases this time. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If7728d8ea4b7f6e7ff6721ade90f975f6efd5ddd Reviewed-on: https://review.coreboot.org/c/coreboot/+/44949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-09-02mb/google/puff/var/noibat: Update DPTF parameters for noibatWisley Chen
1. Update paramerters form thermal team. 2. Update PL2 Max/Min to 51W/15W. BUG=b:167494420 BRANCH=puff TEST=build noibat and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: Id96e681e9a990a1a1eaeb22781b1c60a7369118b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45020 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02mb/google/puff: Update DPTF parameters and TCC offset for faffyDavid Wu
1. Set tcc offset to 5 degree celsius 2. Apply the DPTF parameters receive from the thermal team. 3. Change PL2 min value from 25W to 15W. BUG=b:167477885 BRANCH=puff TEST=build and verify by thermal team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I68fdefe99cf36a39797c29ad84d08321bb8175f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-09-02mb/*/Kconfig: Drop redundant 'select DRIVERS_INTEL_WIFI'Elyes HAOUAS
DRIVERS_INTEL_WIFI is already set to yes. Change-Id: I09f628a9c1feb8992b6fe7c7ca93c75243ffc0f1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-02Revert "mb/google/volteer/variant/lindar: Update memory settings."Patrick Georgi
This reverts commit 2ad859988b5243411393fdf3116eea281b92b1bb. Reason for revert: broke the build Change-Id: I7e7d917c2e8b698d5c7c3ce0b6d34e80696185f3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44993 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02soc/intel/tigerlake: Add mainboard hook for overriding SoC configJes Klinke
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: Iff28e4a29fab5c22c410cdc743d0402134c4ac56 Signed-off-by: jbk@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/44914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-02mb/google/volteer/variant/lindar: Update memory settings.rasheed.hsueh
Based on the Lindar's schematic, generate memory settings. BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I75fb9254ec7aa40acc2e125f0c4fd31003d28be6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-02mb/google/poppy/var/rammus: Update SPD table for RammusKane Chen
1. Add new SPD file, "samsung_dimm_K4E8E324ED-EGCG.spd.hex". 2. Add SPD support in Rammus memory table, as follows: SPD_SOURCES += samsung_dimm_K4E8E324ED-EGCG # 0b0110 SPD_SOURCES += samsung_dimm_K4E6E304ED-EGCG # 0b0111 BUG=b:166576463 BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and make sure system boots up. Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I82386507c4e996e0a59c26ce50de3bced45b1196 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44854 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02util: update .gitignore to ignore spd_tools binariesRob Barnes
Ignore spd_tools binaries. BUG=None TEST=None Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: Ib5759157b668085866d0164301d84e3c15a9ef00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44951 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02util/ifdtool: Fix eSPI frequency as per Gen 11 SPI flash guideSubrata Banik
BUG=b:153888802 TEST=Able to list correct eSPI frequency as per TGL SPI flash guide Without this CL : Found Component Section FLCOMP 0x093030f6 Dual Output Fast Read Support: not supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz With this CL : Found Component Section FLCOMP 0x093030f6 Dual Output Fast Read Support: not supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read eSPI/EC Bus Frequency: 60MHz Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I20840e6f931d7c1fabea0b6892e3bd19ead81168 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-02util/ifdtool: Fix SPI frequency as per Gen11 SPI flash guideSubrata Banik
BUG=b:153888802 TEST=Able to list correct SPI frequency as per TGL SPI flash guide Without this CL : Found Component Section FLCOMP 0x093030f6 Dual Output Fast Read Support: not supported Read ID/Read Status Clock Frequency: 33MHz Write/Erase Clock Frequency: 33MHz Fast Read Clock Frequency: 33MHz Fast Read Support: supported Read Clock Frequency: 20MHz With this CL : Found Component Section FLCOMP 0x093030f6 Dual Output Fast Read Support: not supported Read ID/Read Status Clock Frequency: 50MHz Write/Erase Clock Frequency: 50MHz Fast Read Clock Frequency: 50MHz Fast Read Support: supported Read Clock Frequency: 20MHz Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Id0a0a0cbd948ef8334cf522c09e881b464e87f0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/44819 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02util/ifdtool: Add FLMAP3 dump for Gen11 onwards PCHSubrata Banik
BUG=b:153888802 TEST=Able to dump FLMAP3 for Volteer platform with TGP > ifdtool -d coreboot.rom FLMAP3: 0x00000000 Minor Revision ID: 0x0000 Major Revision ID: 0x0000 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I681abd6ae7b87f6638d4f6dc59168cf22b93c787 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44818 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02util/ifdtool: Fix miscellaneous IFD offset since Gen 5 PCHSubrata Banik
This patch performs below operations: 1. Remove reserved NR field from Gen 5 onwards SPI programming guide 2. Convert ISL to PSL as applicable for Gen 5 onwards PCH 3. Skip FLMAP2 register dump due to nonuniformity since Gen 5 onwards PCH 4. Dump FLILL1 register as applicable for Gen 5 onwards PCH 5. Remove FLPB register as not applicable since Gen 5 PCH BUG=b:153888802 TEST=Dump FD for Hatch platform as below > ifdtool -d coreboot.rom PCH Revision: 300 series Cannon Point/ 400 series Ice Point FLMAP0: 0x00040003 FRBA: 0x40 NC: 1 FCBA: 0x30 FLMAP1: 0x45100208 PSL: 0x45 FPSBA: 0x100 NM: 2 FMBA: 0x80 FLILL1 0xc7c4b9b7 Invalid Instruction 7: 0xc7 Invalid Instruction 6: 0xc4 Invalid Instruction 5: 0xb9 Invalid Instruction 4: 0xb7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5141ae5dd174659fde5401fac313a701ae4f8f44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-02util/ifdtool: Identify between ICH and PCH RevisionSubrata Banik
Consider IBEX_PEAK onwards all chipsets are belong to PCH family. BUG=b:153888802 TEST=Able to print correct PCH revision on Hatch Platform. > ifdtool -d coreboot.rom Without this CL : ICH Revision: 300 series Cannon Point/ 400 series Ice Point With this CL : PCH Revision: 300 series Cannon Point/ 400 series Ice Point Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ifd40dddc9179f347c0ea75149ec08089a829fdb4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-02mb/google/sarien/Kconfig: Drop redundant 'select TPM2'Elyes HAOUAS
TPM2 set to yes by MAINBOARD_HAS_TPM2 at security/tpm/Kconfig file. Change-Id: I815d545618e2e734f8e9b65731bbb4bed0b2d93d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-02src: Drop redundant 'select BOOTBLOCK_CONSOLE'Elyes HAOUAS
BOOTBLOCK_CONSOLE is already set to yes in console/Kconfig file. Change-Id: I2a4ee517795bc7b378afc5eae92e2799ad36111b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-02mb/*/Kconfig: Drop redundant 'select GENERATE_SMBIOS_TABLES'Elyes HAOUAS
GENERATE_SMBIOS_TABLES is already set to yes at src/Kconfig Change-Id: I2845f4f329283360a49ea40dfee7d9a232ab4ea1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-02soc/intel/xeon_sp/Kconfig: Drop redundant 'select POSTCAR_CONSOLE'Elyes HAOUAS
POSTCAR_CONSOLE is already set to yes in console/Kconfig file. Change-Id: If520c33f5e36d569511b2441bf23aa90180591c7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-02{nb,soc}/intel/{haswell,broadwell}/memmap.c: Use ALIGN_DOWN(x, a)Elyes HAOUAS
Change-Id: I049441dd9074659effc1092dce08224974d60a2c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-02mb/google/kukui: Add LPDDR4X support for fennel/cerise/sternxuxinxiong
Modify the BOARD_SDRAM_TABLE_OFFSET as 0x10 BUG=b:162891673 BRANCH=kukui TEST=make Change-Id: I5a4794d6e899e35686c40a553b991643f9e35ea3 Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jianbo Zhang <zhangjianbo@huaqin.corp-partner.google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2020-09-01mb/*/Kconfig: Drop redundant 'select CONSOLE_SERIAL'Elyes HAOUAS
'CONSOLE_SERIAL' is already set to 'y' at src/console/Kconfig. Change-Id: I350cf12a115c6ebe54a2b0821edc94c29db8d137 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-01mb/google/puff: Update DPTF parameters for kaisa and duffyDavid Wu
1. Apply the DPTF parameters receive from the thermal team. 2. Change PL2 min value from 25W to 15W. 3. Change PL2 max value from 64W to 51W. BUG=b:166696500 BRANCH=puff TEST=build and verify by thermal team Change-Id: I53a4e8809369883c3ba77744fdc05fb510408209 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44903 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-01{include,mb,soc,sb,vendorcode}: Make hexadecimal notation consistentSubrata Banik
Convert 0X -> 0x Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Iea3ca67908135d0e85083a05bad2ea176ca34095 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-01mb/google/puff: Convert ASL file to new DPTF dt implEdward O'Callaghan
This patch converts the current DPTF policies from static ASL files into the new SSDT-based DPTF implementation. All settings are intended to be copied exactly. BUG=b:158986928 BRANCH=puff TEST=duffy boots and dumped SSDT table for quick check. Change-Id: I45987f44ec381917173f8d2a878edb50da454b4b Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-08-31mb/google/zork: Fix SPD typo in trembyle makefileRob Barnes
Relative path to spd directory was wrong. BUG=b:167175547 TEST=Boot Trembyle SKU 2 Change-Id: I63ae4f39ba69d2d80c25ac7383b6eb953901f56d Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44946 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31Documentation: Discuss how we use languagePatrick Georgi
Change-Id: I44fa30af538c78760821401c8d3c52029d95b72b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-08-31device: Add method to configure bus mastering based on KconfigFelix Singer
The bus master bit is set at many places in coreboot's code, but the reason for that is not quite clear. We examined not setting the bus master bit whereever possible and tried booting without it, which worked fine for internal PCI devices but not for PCIe. As a PCIe device we used a Samsung M.2 NVMe SSD. For security reasons, we would like to disable bus mastering where possible. Depending on the device, bus mastering might get enabled by the operating system (e.g. for iGPU) and it might be required for some devices to work properly. However, the idea is to leave it disabled and configure the IOMMU first before enabling it. To have some sort of "backwards compatibility", add a method which configures bus mastering based on an additional config option. Since CB:42460 makes usage of this treewide, enable it by default to keep the current behaviour for now. Tested with Siemens/Chili, a Coffee Lake based platform. Change-Id: I876c48ea3fb4f9cf7b6a5c2dcaeda07ea36cbed3 Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42459 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31mb/google/zork: Fix active polarity of REPORT_EN pin in overridetreeFurquan Shaikh
GPIO_144 is REPORT_EN pin for the touchscreen controller where 1 means enable operation and 0 means stop operation. Override tree exposes this pin as stop GPIO. Thus, it needs to be configured as active low i.e. 0 = active (stop), 1 = inactive (enable report). Change-Id: I349123655260349b78d2f75f846da0ce1dc966fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31mb/google/zork: Fix active polarity of touchscreen reset GPIO in overridetreeFurquan Shaikh
v3.6+ of reference schematics have moved to using active low polarity for touchscreen GPIO. This change sets the default polarity in override tree accordingly to active low. To support boards from older builds, variant_touchscreen_update() already updates the polarity to active high. BUG=b:161937506 Change-Id: I370bdb27ea5d0601612d13b515113a6048018964 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31Documentation: Update release notes for x86_64Patrick Rudolph
Change-Id: I7d8d39bde3b3364ff6ce93030aa2bab34598acd8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-31soc/intel/elkhartlake/romstage: Do initial SoC commit till romstageTan, Lean Sheng
Clone entirely from Jasperlake List of changes on top off initial jasperlake clone 1. Replace "Jasperlake" with "Elkhartlake" 2. Replace "jsl" with "ehl" 3. Rename structure based on Jasperlake with Elkhartlake 4. Clean up upd override in fsp_params.c, will be added later 5. Temporarily remove _weak attributes in fsp_param & romstage.c 6. Add required headers into include/soc/ from jasperlake directory Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: If2bbe0b8a12bb78b3650f9d0a60f002f7eacb513 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-31soc/intel/elkhartlake/bootblock: Do initial SoC commit until bootblockTan, Lean Sheng
Clone entirely from Jasperlake This patch is based on TGL_upstream series patches: https://review.coreboot.org/c/coreboot/+/36550 List of changes on top off initial jasperlake clone 1. Replace "Jasperlake" with "Elkhartlake" 2. Replace "jsl" with "ehl" 3. Rename structure based on Jasperlake with Elkhartlake 6. Add required headers into include/soc/ from JSL directory Elkhart Lake specific changes will follow in subsequent patches. 1. soc/intel/elkhartlake: Update Kconfig Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I9f91c1efa81a358b1f59e032e209e07b62d54613 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-31util/ifdtool: Identify chipset without platform nameSubrata Banik
Able to uniquely identify the chipset without specifying the platform specific quirks (adl/cnl/icl/jsl/tgl etc.). BUG=b:153888802 TEST=Able to dump FD contains correctly without specifying platform quirks on Hatch Platform. > ifdtool -d coreboot.rom Without this CL : ICH Revision: 100 series Sunrise Point With this CL : ICH Revision: 300 series Cannon Point/ 400 series Ice Point Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I83763adb721e069343b19a10e503975ffa6abb24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44815 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31util/ifdtool: Skip unused and reserved Flash RegionSubrata Banik
This patch ensures all unused and reserved flash region sections are not getting listed while using -d option to dump FD. BUG=b:153888802 TEST=List only used flash region section with below command > ifdtool -p tgl -d coreboot.rom Without this CL : Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x1fff0400 Flash Region 1 (BIOS): 00400000 - 01ffffff FLREG2: 0x03ff0001 Flash Region 2 (Intel ME): 00001000 - 003fffff FLREG3: 0x00007fff Flash Region 3 (GbE): 07fff000 - 00000fff (unused) FLREG4: 0x00007fff Flash Region 4 (Platform Data): 07fff000 - 00000fff (unused) FLREG5: 0x00007fff Flash Region 5 (Reserved): 07fff000 - 00000fff (unused) FLREG6: 0x00007fff Flash Region 6 (Reserved): 07fff000 - 00000fff (unused) FLREG7: 0x00007fff Flash Region 7 (Reserved): 07fff000 - 00000fff (unused) FLREG8: 0x00007fff Flash Region 8 (EC): 07fff000 - 00000fff (unused) With this CL : Found Region Section FLREG0: 0x00000000 Flash Region 0 (Flash Descriptor): 00000000 - 00000fff FLREG1: 0x1fff0400 Flash Region 1 (BIOS): 00400000 - 01ffffff FLREG2: 0x03ff0001 Flash Region 2 (Intel ME): 00001000 - 003fffff FLREG3: 0x00007fff Flash Region 3 (GbE): 07fff000 - 00000fff (unused) FLREG4: 0x00007fff Flash Region 4 (Platform Data): 07fff000 - 00000fff (unused) FLREG8: 0x00007fff Flash Region 8 (EC): 07fff000 - 00000fff (unused) Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I900a29d8968bd61d66c04012e60e1ba4baff786d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-31util/ifdtool: Add platform specific quirks for ADL/ICL/JSL/TGLSubrata Banik
BUG=b:153888802 TEST=Able to dump FD contain using below command > ifdtool -p tgl -d coreboot.rom Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I0c9106051f4daf592d2467ebf79f9ddb037011dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/44809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-31arch/x86/exit_car.S: Fix checking clflush supportArthur Heymans
The BT instruction stores its result in CF and not ZF so use the correct jump instruction. This fixes a hang in postcar on CPUs lacking support for this instruction. This concerns older pre-SSE2 hardware. Change-Id: I704e3c579150fb9b9a292ef0e83050e7bf7cb078 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-08-31mainboard/intel/tigerlake: Update SPD files for TGL-UP3 RVPShreesh Chhabbi
These changes are according to spd_binary_optimization_volteer_v0.4 sheet. Offset Current value Updated value Analysis 1 0x10 0x11 As per SPD spec rev 1.1 5 0x19 0x21 16 bits for Row addrs, 10 bits for Column addrs 6 0x95 0xB5 4 die, 2 ch per pkg, Byte 16 signal matrix 12 0x02 0x0A 2 ranks per ch, 16 bits device data width 18 0x05 0x04 4267MHz support 29 0x90 0xC0 HW specific 30 0x06 0x68 HW specific 31 0xD0 0x60 HW specific 32 0x02 0x04 HW specific 125 0x00 0xE1 4267MHz support BUG=b:159319534 TEST=Tested multiple cold boot cycles on TGL-UP3 with QS silicon Change-Id: Ie506fbfe86a3ffb77763e8d9ef7e8aa69ea44bd3 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42524 Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31mb/google/dedede/var/drawcia: Add elan USI touchscreenWisley Chen
BUG=b:155002684 TEST=emerge-dedede coreboot chromeos-bootimage Change-Id: I87d8575131e745dec818bc5864ca6b21ce0825af Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-31Makefile.inc: Print warning type ignored by IASLMaxim Polyakov
- Use a new variable to store the list of warning types; - print this list when building an image. TEST = build image on Kontron mAL-10 COMe module: IASL 3150 2158 3133 warning types were ignored! IASL build/dsdt.aml disassembled correctly. Change-Id: I46f761612254b400563f8567be9bd61601f23467 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-31mb/amd/mandolin: move PCIe GPP clock setting to devicetreeFelix Held
Checked with the schematics that all PCIe clocks have a corresponding clock enable pin. BUG=b:149970243 BRANCH=zork Change-Id: If96cdf95e213682217e46a98fc69c5c2ef4a148d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44892 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31mb/google/zork/dalboz: move PCIe GPP clock setting to devicetreeFelix Held
BUG=b:149970243 BRANCH=zork Change-Id: I0b31466c5a991b02cef3432942f8de45805fe546 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44891 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31mb/google/zork/trembyle: add PCIe GPP clock setting to devicetreeFelix Held
BUG=b:149970243 BRANCH=zork Change-Id: Ie3fc83484c6ce769956dc8e6e57194ffebb4f5b0 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44890 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31soc/amd/picasso/southbridge: make GPP clock outputs configurableFelix Held
Make the general purpose PCIe clock outputs configurable to be either permanently enabled, permanently disabled or dynamically enabled via their corresponding external #CLK_REQx pins in the board's devicetree. BUG=b:149970243 BRANCH=zork Change-Id: I3f5760c0b869e8a9416ba9b57d182a88a2eb5e44 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31soc/amd/picasso/southbridge.h: rename GPP clock setting offsetsFelix Held
The _SHIFT postfix is a bit clearer than the _SHL one and more in line with the names used for this kind of defines in coreboot. The documentation on that register is currently wrong and will hopefully be fixed in the future; the defines should now match the hardware. BUG=b:149970243 BRANCH=zork Change-Id: I977f107d466521484ca13fa1f4dd86a50c8150d7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31include/device/azalia_device: Fix typoPatrick Rudolph
The code using the macro was found not working after finally enabling the HDA PCI device on the hermes board. Fix a typo to generate the correct verbs. Tested on prodrive/hermes. Change-Id: I953c2e9fbebc1f02bdf71ce868a95f578300c3a1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44900 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31gitignore: Remove obsolete pathsElyes HAOUAS
Change-Id: I3288fd3cd6df44cdaddff0b225d4dc9eb8300378 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44898 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31lint/lint-extended-007-checkpatch: Remove obsolete pathElyes HAOUAS
Change-Id: I8a91d2a8bc6a1fa709aeadd3b7482d1785068276 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-31mb/google/zork: update GPIO config for dirinbozKevin Chiu
dirinboz does not support stylus, config AGPIO4/5 to NC to prevent unexpected wake event for s3. BUG=none BRANCH=zork TEST=emerge-zork coreboot chromeos-bootimage Change-Id: I3cfdeb326c3d3775148b2a00732c7d848dab35cb Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44894 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31mb/google/zork: update GPIO config for berknipKevin Chiu
berknip does not support stylus, config AGPIO4/5 to NC to prevent unexpected wake event for s3. BUG=b:162376046 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I8d9b711ce1d7300181fe496d490dd33b38bc5983 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44893 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31soc/amd/picasso/southbridge.h: replace GPP_CLK_REQ_MAP_* with macrosFelix Held
Replacing the existing defines with macros makes them easier to use in a function that applies the setting for a certain GPP/GFX clock output. Also add macros for statically enabling or disabling the clock outputs and not only for configuring them as controlled by the #CLK_REQx pins. BUG=b:149970243 BRANCH=zork Change-Id: I14198f224639721fe6ca71ca3dcd9cb413a587d5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31soc/amd/picasso/southbridge.h: remove OSCOUT*_CLK_OUTPUT_ENB definitionsFelix Held
On Picasso MISC_CLK_CNTL1 doesn't contain OSCOUT[12]_CLK_OUTPUT_ENB and this was probably just copied over from stoneyridge. BUG=b:149970243 BRANCH=zork Change-Id: I32f459026c4e8632672123681b20736245f198b2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44886 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31Update arm-trusted-firmware submodule to upstream masterJulius Werner
Updating from commit id ace23683b: 2019-09-27 Merge changes from topic "ld/stm32-authentication" into integration to commit id a4c979ade: 2020-08-26 Merge changes I6bf1db15,I8631c34a,Id76ada14 into integration This brings in 1825 new commits. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id26301dae421eec61c10a2d18842053f3228c557 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44885 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31xhci: Do not set the CRCR_CS bitCaveh Jalali
We do not need to set the CS (Command Stop) bit in the Command Ring Control Register. CS is implied by CA (Command Abort). I'm not sure if there is a defined execution order for these command bits, so it's safer to only use the CA bit as it includes the CS function. Ref: xHCI spec 1.2 (May 2019), Section 5.4.5, Table 5-24. BUG=b:160354585,b:157123390 TEST=able to boot into recovery using USB stick on servo v2 on volteer as well as HooToo 8-1 hub Change-Id: Iaeba98b6da8da49f529358ca6d68270440ea0f42 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-31xhci: Fix Abort command event handlingCaveh Jalali
This fixes issues with how we handle events generated by the xHCI "command abort" command. first, depending on the state of the xHCI controller, the COMMAND_ABORTED may not be generated. If the controller was between commands, only the COMMAND_RING_STOPPED event will be generated. Second, do not adjust the command ring "cur" pointer as that just confuses the controller. BUG=b:160354585,b:157123390 TEST=able to boot into recovery using USB stick on servo v2 on volteer as well as HooToo 8-1 hub Change-Id: I055df680d1797f35d9730e2bfdb4119925657168 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-31mb/google/volteer: Add probed fw_configs to SMBIOS OEM stringsTim Wawrzynczak
Some Linux kernel drivers bind to "DMI quirks." In this case, the audio fw_config is added as an OEM string, e.g., "AUDIO-MAX98357_ALC5682I_I2S" so the audio topology can be correctly discovered. But add all successfully probed fw_config items as well, because this makes it easier to view what is selected from userspace. BUG=b:161963281 TEST=With CBI FW_CONFIG field set to 0x201: localhost ~ # dmidecode -t 11 # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x0009, DMI type 11, 5 bytes OEM Strings String 1: DB_USB-USB4_GEN2 String 2: AUDIO-MAX98373_ALC5682I_I2S Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7b7586b0ebfe7b2fd888f448a50ae086364fa718 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-31fw_config: Add caching to successfully probed fieldsTim Wawrzynczak
Add a backing cache for all successfully probed fw_config fields that originated as `probe` statements in the devicetree. This allows recall of the `struct fw_config` which was probed. BUG=b:161963281 TEST=tested with follower patch Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I0d014206a4ee6cc7592e12e704a7708652330eaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/44782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-31{intel/gma,include/device}: Delete unused 'drm_dp_helper.h' fileElyes HAOUAS
'drm_dp_helper.h' file is duplicated and not used. Change-Id: Ibb08f7ff91c3914940dfe899be331b06e292c7c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-08-31mb/pcengines/apu2/mainboard.c: Use 'PCI_BASE_ADDRESS_0' instead of magic numberElyes HAOUAS
Change-Id: I21378acd6408a4fae5600a54a41f695e54221dc2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44829 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31mb/pcengines/apu1/mainboard.c: Use 'PCI_BASE_ADDRESS_2' instead of magic numberElyes HAOUAS
Change-Id: Ibc2446d7b8d4334e26ca6335179f50b7abe301cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44831 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31cross-repo-cherrypick: Do not prepend "Original-" to "Cq-Depend:"Karthikeyan Ramasubramanian
Marking dependencies has undergone some change in Chrome OS tree. The script to cherry-pick the changes to ChromeOS tree prepends "Original-" to the concerned meta data i.e. Cq-Depend becomes Original-Cq-Depend. This causes dependencies to not take effect when changes are submitted to the continuous integration. Do not prepend "Original-" to the dependency meta data. BUG=None TEST=Ensure that the Cq-Depend line is added without any prefix. Change-Id: I0503234954f872ee56708e19e89cae9d9fa30df7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-31mb/google/volteer: add GPP_F11 to baseboard gpio_tableNick Vaccaro
GPP_F11 was in the early gpio table, but the definition was missing from the main gpio_table. This change adds GPP_F11 to the gpio_table array. BUG=none TEST="emerge-volteer coreboot" and verify it builds correctly. Change-Id: I40f887300a9dfd4f8e790031b77bbee8a014f499 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-08-31mb/google/volteer: add generic DDR4 SPDs for EldridNick Vaccaro
Add Makefile.inc to include six generic DDR4 SPDs for the following parts for Eldrid: DRAM Part Name DRAM ID to assign H5AN8G6NDJR-XNC 0 (0000) MT40A512M16TB-062E:J 1 (0001) H5ANAG6NCMR-XNC 2 (0010) K4A8G165WC-BCWE 0 (0000) K4AAG165WA-BCWE 3 (0011) MT40A1G16KD-062E:E 3 (0011) Add mem_list_variant.txt as a manifest of eldrid's DRAM parts for use by gen_spd, the generic DD4 SPD generation tool. Add dram_id_generated.txt to specify DRAM ID strap settings. NOTE that Eldrid specified DRAM IDs for the first three parts to be 0 though 2 (i.e. no combined DRAM IDs for parts that use the same SPD). BUG=b:161772961 TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds without error. Change-Id: Ica62e299ed40e60c2d5928b29ead5d2205b1af66 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44272 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31mb/biostar: Drop unneeded empty linesElyes HAOUAS
Change-Id: I4c7f23615bcfd9c2bda2cac8808544b98f8e25a2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-31mb/amd: Drop unneeded empty linesElyes HAOUAS
Change-Id: Ib82689150689716bc9afdf8d4527a1dcd5deae56 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-31superio/winbond/wpcd376i: Resurrect the driverSamuel Holland
This SuperIO chip is used on the Intel DQ45EK mainboard. Restore the driver that was deleted in commit d3a1a4171ee9 ("src/superio: Remove unused superio chips"). Changes from the previous version include: - Replacing the early serial implementation with Winbond common code, - Replacing the license boilerplate with SPDX headers, and - Removing unnecessary header file references. Change-Id: I0ff1a63c47d5dff2599c83a1cebe1ac5ff2136b1 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-31vendorcode/google: Add error handlingJohn Zhao
Coverity detects missing error handling after calling function tlcl_lib_init. This change checks the function tlcl_lib_init return value and handles error properly. Found-by: Coverity CID 1431994 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ib831646b6a231ad57e3bfef85b801b592d572e6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/44777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-31nb/intel/sandybridge: Add ECC error injection register informationAngel Pons
Change-Id: I669a611e804d67bb6e87775d273dc24b03b06691 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44396 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31mb/google/volteer/var/halvor: Update TBT2 setting for HalvorFrank Wu
Enable TBT2 setting in overridetree.cb based on schematic. BUG=b:165175296, b:166060548 BRANCH=none TEST=Check all USB ports USB2 and USB3 both functional Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I23ecf76a3c2f631211b0ae2898707c68862b374b Reviewed-on: https://review.coreboot.org/c/coreboot/+/44747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-08-31mb/google/puff: Set TCC offset to 5 for kaisa and duffyDavid Wu
Set tcc offset to 5 degree celsius for kaisa and duffy BUG=b:166696500 BRANCH=puff TEST=Build, and verify test result by thermal team. Change-Id: I2bb977b98c0764f0b9cac3543074da56057717cf Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44901 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-30mb/system76/lemp9: gpio: add a pull-down for MODEM_CLKREQ / CNVI_CLKREQMichael Niewöhner
MODEM_CLKREQ / CNVI_CLKREQ has no external pull-down resistor. When there is no M.2 card populated, the pin is floating. Thus enable an internal 20K PD. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I37e0a9d7e9e0a8c8a7ac198abfd3995b8b0f9e3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-08-30mb/system76/lemp9: add wifi devicesMichael Niewöhner
Add CNVi and PCIe wifi devices to the devicetree and enable the wifi driver and SMBIOS tables in Kconfig. Test: both CNVi and PCIe wifi devices work fine Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I16e04dbbf5fc3a163ce5a2bb8de646877d5cbc0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/43654 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-30mb/system76/lemp9: gpio: rework commentsMichael Niewöhner
Rework the comments: - fix wrong gpio / net names - convert all comments to <gpio> / <net name> - add more information where appropriate Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I51b552fd3255d5627dcc012e677bad51be517cf0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43650 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-30mb/system76/lemp9: gpio: convert PAD_CFG_TERM_GPO to PAD_CFG_GPOMichael Niewöhner
Convert PAD_CFG_TERM_GPO with pull "NONE" to its shorter equivalent PAD_CFG_GPO. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I9ed4d97ba184fa3e72425d5d16042a142b0640b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43649 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-30mb/system76/lemp9: gpio: disable unused pad for INTP_OUTMichael Niewöhner
INTP_OUT can be used as Type-C VBUS sense input/interrupt but is currently unused in coreboot. It isn't a requirement for PD to work. Disable it for now. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I233fbb562969487dff095ba6589fb9da3301ae4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43647 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-30mb/system76/lemp9: gpio: disable internal SATAXPCIE pull-upsMichael Niewöhner
Disable internal pull-ups for SATAXPCIE pads since there are external ones at the M.2 slot's PEDET pins. Test: both, SATA and NVME devices work fine on both slots Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I6be716620695ac38c44a17abe1c4de97b099b8d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43645 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-30mb/system76/lemp9: gpio: configure unused padsMichael Niewöhner
There are pads being unused for various reasons: a) missing board support (DeepSx: SUSWARN#) b) unneeded feature ID pins - currently no known device models without keyboard backlight - currently no known device models without TPM c) BOARD_ID (L140CU/L140ZU) is fixed and known at build time d) DDR_TYPE_*: there is only one known ram model e) strap-only pads f) unconnected pads Configure them as NC with appropriate pull-up if no external pull exists. The latter was checked by schematics and looking at the board. When any of the unused ID pins is needed in the future, they can be reactivated easily (configure as GPI). Further, convert from use of legacy macro PAD_CFG_NC to PAD_NC. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ia370c180d5ae6f48360be14af3cbab29e6814e75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43644 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-30mb/google/volteer: Update flashmap descriptor for CSE Lite FW updateJamie Ryu
To support CSE Lite firmware update, CSE RW partition is extracted from CSE blob binary and added to FW_MAIN_A and FW_MAIN_B. CSE RW size for TGL is close to 2.3MB; hence, the size of FW_MAIN_A and FW_MAIN_B is increased to avoid an overflow. BUG=b:140448618 TEST=build with me_rw binary blob for volteer and boot to kernel. Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: Ie3c2b657f0426d206dfe3729829ec34ff57812c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43790 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 19:22:07 +0000