summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2015-03-27broadwell: Add broadwell specific platform ASLDuncan Laurie
2015-03-27broadwell: fixed power gating enable for disabled sata portKane Chen
2015-03-27broadwell: sata updates from 2.1.0 ref codeKane Chen
2015-03-27broadwell: Fix devslp enable to use correct registerDuncan Laurie
2015-03-27broadwell: Add small delay before Flex Ratio rebootDuncan Laurie
2015-03-27broadwell: Fix TCO register size and event reportingDuncan Laurie
2015-03-27samus: Enable WLAN wake GPIO in _PRWDuncan Laurie
2015-03-27broadwell: Misc updates from 2.1.0 ref codeDuncan Laurie
2015-03-27samus: Fix some SPD geometry againDuncan Laurie
2015-03-27samus: Disable CMDPWR on broadwellKane Chen
2015-03-27broadwell: Tweak GFXPAUSE settings based on revisionDuncan Laurie
2015-03-27samus: Update SPDDuncan Laurie
2015-03-27broadwell: Add config option to disable DSP power gating in D3Duncan Laurie
2015-03-26build system: Test gccs that are actually usedPatrick Georgi
2015-03-26timer: remove rela_time typeAaron Durbin
2015-03-26rk3288: switch to stopwatch APIAaron Durbin
2015-03-26cbfs: support concurrent media channels properlyVadim Bendebury
2015-03-26rush: Remove CHROMEOS defaultPatrick Georgi
2015-03-26inteltool: add ICH8M-E supportLubomir Rintel
2015-03-26Chrome OS vendorcode: Fix vboot_reference compilationStefan Reinauer
2015-03-26util: Add miniconfig, a script to minimize coreboot configurationsStefan Reinauer
2015-03-26tegra132: allow mainboards to insert memory regions in address mapAaron Durbin
2015-03-26arm64: Seed the stack at stage_entryFurquan Shaikh
2015-03-26tegra132: Initialize CNTFRQFurquan Shaikh
2015-03-26tegra132: add I2C6 controller to funit libraryTom Warren
2015-03-26ryu: enable external usb 2.0 portAaron Durbin
2015-03-26tegra132: add usb initialization support to funitAaron Durbin
2015-03-26rush: Add usb support for rush in corebootFurquan Shaikh
2015-03-26tegra132: include what is actually usedAaron Durbin
2015-03-26tegra132: provide more robust array bounds checkingAaron Durbin
2015-03-26tegra132: add base addresses to funit structuresAaron Durbin
2015-03-26tegra132: add more base addresses to address mapAaron Durbin
2015-03-26tegra132: break out clock config in funit libraryAaron Durbin
2015-03-26tegra132: use pointers in funitcfgAaron Durbin
2015-03-26ryu: convert hardware initialization to funit APIAaron Durbin
2015-03-26tegra132: add i2c2 controller to funit libraryAaron Durbin
2015-03-26rush: support for DMA regionFurquan Shaikh
2015-03-26tegra: Clean up USB codeFurquan Shaikh
2015-03-26ryu: support for DMA regionAaron Durbin
2015-03-26arm64: handle non-cacheable normal memoryAaron Durbin
2015-03-26tegra132: fix carveout address calculation >= 4GiBAaron Durbin
2015-03-26rush: Convert rush initialization to use funitcfg apiFurquan Shaikh
2015-03-26t132: Implement clock initialization api for functional unitsFurquan Shaikh
2015-03-26t132: ryu: Correct how board id is retrievedJimmy Zhang
2015-03-26fix how to interpret board id read from gpiosDaisuke Nojiri
2015-03-26Restore name of the function reading tertiary GPIO statesVadim Bendebury
2015-03-26ryu: Update BCT to Max Frequency 924MHzJimmy Zhang
2015-03-26ryu: convert mainboard initialization to use padconfig APIAaron Durbin
2015-03-26tegra132: move common bootblock init into SoC codeAaron Durbin
2015-03-26ryu: configure EC I2C pads as open drainAaron Durbin
2015-03-26ryu: use EC proto v3 over i2cAaron Durbin
2015-03-26ryu: enable vboot firmware verificationAaron Durbin
2015-03-25crossgcc: Factor out error reportingPatrick Georgi
2015-03-25crossgcc: point users to the log file in case of errorPatrick Georgi
2015-03-25tegra132: enable pinmux input for PAD_CFG_GPIO_INPUT()Aaron Durbin
2015-03-25tegra132: select HAVE_MONOTONIC_TIMERAaron Durbin
2015-03-25tegra132: use pre-existing reset APIAaron Durbin
2015-03-25rush/ryu: restore full-speed clocks to TPM I2C and EC SPITom Warren
2015-03-25rush: switch to padconfig API in ramstageFurquan Shaikh
2015-03-25tegra: correct gpio_index_to_port() calculationAaron Durbin
2015-03-25tegra132: fix gpio constantsAaron Durbin
2015-03-25tegra132: output chip information and MTS versionAaron Durbin
2015-03-25ryu: Add 4 LPDDR3 SDRAM BCTsAaron Durbin
2015-03-25ryu: Add three more full LPDDR3 SDRAM BCTsJimmy Zhang
2015-03-25ryu: switch to padconfig API in romstageAaron Durbin
2015-03-25rush: switch to padconfig API in romstageAaron Durbin
2015-03-25tegra132: introduce romstage_mainboard_init()Aaron Durbin
2015-03-25rush: Fix recovery mode switch functionFurquan Shaikh
2015-03-25rush: Add support for chromeos_ecFurquan Shaikh
2015-03-25ryu: Add mainboard_init_xxx functions to get it building againTom Warren
2015-03-25cpu/amd/model_10xxx: Increase preram buffer size to 32kTimothy Pearson
2015-03-25console: Convert cbmem log line endings to UNIX standardTimothy Pearson
2015-03-25crossgcc: check for more tools that we requirePatrick Georgi
2015-03-24checkpatch: Fix running out of coreboot's treeStefan Reinauer
2015-03-24cbfs: expose init_backing_media()Aaron Durbin
2015-03-24ryu: use padconfig API in bootblockAaron Durbin
2015-03-24rush: use padconfig API in bootblockAaron Durbin
2015-03-24tegra132: add bootblock_mainboard_early_init()Aaron Durbin
2015-03-24tegra132: use padconfig for initializing uart padsAaron Durbin
2015-03-24tegra132: provide pad configuration interfaceAaron Durbin
2015-03-24pinky: implement hard_resetDaisuke Nojiri
2015-03-24veyron: add config values for fmap and tpmDaisuke Nojiri
2015-03-24rk3288: sync i2c driver with depthchargeDaisuke Nojiri
2015-03-24veyron_pinky: Move PMIC driver into SoC directoryJulius Werner
2015-03-24veyron_pinky: Add board ID supportJulius Werner
2015-03-24veyron: Rename "veyron" board to "veyron_pinky"Julius Werner
2015-03-24veyron: Fix file permissionsJulius Werner
2015-03-24rk3288: update romstage & mainboardhuang lin
2015-03-24rk3288: add cpu and chiphuang lin
2015-03-24rk3288: add ddr driverJinkun Hong
2015-03-24rk3288: add gpiohuang lin
2015-03-24rk3288: add i2chuang lin
2015-03-24add make_idb.py & update bootblockhuang lin
2015-03-24rk3288: add mediahuang lin
2015-03-24rk3288: add iomux operationhuang lin
2015-03-24rk3288: add spihuang lin
2015-03-24rk3288: add clock modulejinkun.hong
2015-03-24vboot: Add support for OPROM_MATTERS and SLOW_ECDuncan Laurie
2015-03-24vboot: add vbnv_flash as templateDaisuke Nojiri
2015-03-24vboot2: factory-initialize kernel space in tpmDaisuke Nojiri
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 15:00:00 +0000