1 files changed, 57 insertions, 88 deletions
diff --git a/targets/embeddedplanet/ep405pc/Config.lb b/targets/embeddedplanet/ep405pc/Config.lb
index d9c03ff11e..8862a8566b 100644
--- a/targets/embeddedplanet/ep405pc/Config.lb
+++ b/targets/embeddedplanet/ep405pc/Config.lb
@@ -1,96 +1,66 @@
 # Config file for Embedded Planet EP405PC board
 # This will make a target directory of ./ep405pc
 
-loadoptions
-
 target ep405pc
-
-uses CPU_OPT
-uses CROSS_COMPILE 
-uses HAVE_OPTION_TABLE
-uses CONFIG_COMPRESS 
-uses CONFIG_CHIP_CONFIGURE
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_USE_INIT
-uses CONFIG_CONSOLE_SERIAL8250 
-uses TTYS0_BAUD TTYS0_DIV
-uses NO_POST
-uses CONFIG_IDE
-uses CONFIG_FS_STREAM
-uses CONFIG_FS_EXT2
-uses CONFIG_FS_ISO9660
-uses CONFIG_FS_FAT
-uses AUTOBOOT_CMDLINE
-uses CONFIG_SYS_CLK_FREQ
-uses IDE_BOOT_DRIVE
-uses IDE_SWAB IDE_OFFSET 
-uses ROM_SIZE
-uses _RESET
-uses _EXCEPTION_VECTORS
-uses _ROMBASE
-uses _ROMSTART
-uses _RAMBASE
-uses _RAMSTART
-uses EMBEDDED_RAM_SIZE
-uses STACK_SIZE HEAP_SIZE
-
-## Enable PPC405 instructions
-option CPU_OPT="-Wa,-m405"
-
-## use a cross compiler
-#option CROSS_COMPILE="powerpc-eabi-"
-
-## Use stage 1 initialization code
-option CONFIG_USE_INIT=1
-
-## Use chip configuration
-option CONFIG_CHIP_CONFIGURE=1
-
-## We don't use compressed image
-option CONFIG_COMPRESS=0
-
-## Turn off POST codes
-option NO_POST=1
-
-## Enable serial console
-option DEFAULT_CONSOLE_LOGLEVEL=8
-option CONFIG_CONSOLE_SERIAL8250=1
-# Divisor of 69 == 9600 baud due to weird clocking
-option TTYS0_DIV=69
-option TTYS0_BAUD=9600
-
-## Boot linux from IDE
-option CONFIG_IDE=1
-option CONFIG_FS_STREAM=1
-option CONFIG_FS_EXT2=1
-option CONFIG_FS_ISO9660=1
-option CONFIG_FS_FAT=1
-option AUTOBOOT_CMDLINE="hda1:/vmlinuz"
-
-option ROM_SIZE=1048576
-
-## Board has fixed size RAM
-option EMBEDDED_RAM_SIZE=64*1024*1024
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x00100000
-
-##
-## Use a 64K stack
-##
-option STACK_SIZE=0x10000
-
-##
-## Use a 64K heap
-##
-option HEAP_SIZE=0x10000
-
-##
-## System clock
-##
-option CONFIG_SYS_CLK_FREQ=33
+mainboard embeddedplanet/ep405pc
 
 romimage "normal"
+        ## Enable PPC405 instructions
+        option CPU_OPT="-mcpu=405"
+
+        ## use a cross compiler
+        #option CROSS_COMPILE="powerpc-ibm-eabi-"
+
+        ## Use stage 1 initialization code
+        option CONFIG_USE_INIT=1
+
+        ## Use chip configuration
+        option CONFIG_CHIP_CONFIGURE=1
+
+        ## We don't use compressed image
+        option CONFIG_COMPRESS=0
+
+        ## Turn off POST codes
+        option NO_POST=1
+
+        ## Enable serial console
+        option DEFAULT_CONSOLE_LOGLEVEL=8
+        option CONFIG_CONSOLE_SERIAL8250=1
+        # Divisor of 69 == 9600 baud due to weird clocking
+        option TTYS0_DIV=69
+        option TTYS0_BAUD=9600
+
+        ## Boot linux from IDE
+        option CONFIG_IDE=1
+        option CONFIG_FS_STREAM=1
+        option CONFIG_FS_EXT2=1
+        option CONFIG_FS_ISO9660=1
+        option CONFIG_FS_FAT=1
+        option AUTOBOOT_CMDLINE="hda1:/vmlinuz"
+
+        option ROM_SIZE=1048576
+
+        ## Board has fixed size RAM
+        option EMBEDDED_RAM_SIZE=64*1024*1024
+
+        ## LinuxBIOS C code runs at this location in RAM
+        option _RAMBASE=0x00100000
+
+        ##
+        ## Use a 64K stack
+        ##
+        option STACK_SIZE=0x10000
+
+        ##
+        ## Use a 64K heap
+        ##
+        option HEAP_SIZE=0x10000
+
+        ##
+        ## System clock
+        ##
+        option CONFIG_SYS_CLK_FREQ=33
+
 	##
 	option _ROMBASE=0xfff00000
 
@@ -106,7 +76,6 @@ romimage "normal"
 	## linuxBIOS C code runs at this location in RAM
 	option _RAMBASE=0x00100000
 
-	mainboard embeddedplanet/ep405pc
 end
 
 buildrom ./linuxbios.rom ROM_SIZE "normal"